5.1.46 SFAPP Options

The SFAPP Options are those configuration values that govern the overall SFAPP functionality. There is a single instance of this resource, which contains each of the individual options that can be retrieved and set.

The SFAPP Options can only be updated and cannot be created or deleted.

Select the vSTP, and then Configuration, and then SFAPP Options page. The page displays the elements on the SFAPP Options View, Insert, and Edit pages.

Note:

Data Input Notes apply to the Insert and Edit pages only; the View page is read-only.

Table 5-46 SFAPP Options Elements

Element Description Data Input Notes
Aging Timer

This parameter defines value for aging.

Default: n/a

Range: None, 1-65535
Failure Threshold

This parameter defines the failed validation threshold.

Default: n/a

Range: None, 1-65535
Learn Timer

New learning possible in this mode. No validation performed.

Default: 8

Range: None, 4-12
Sfapp Mode

Provides the option to turn off dynamic learning,test the learning algorithm, and move the system in operation using various modes.

Default: Off

Range: Off, Learn, Test, Active
Success Threshold

This parameter defines the successful validation threshold.

Range: None, 1-65535
Velocity Threshold

This parameter defines the number of velocity check attempts.

Range: None, 1-65535
Maximum Profile Limit

Maximum Profile Limit.

Default: No,

Range: No, Yes
Maximum Roaming Limit

Maximum Roaming Limit.

Default: No,

Range: No, Yes
Skip Cross Protocol Check This parameter defines whether or not to skip 3G/4G cross protocol validation for same MCC.

Default: No,

Range: No, Yes
Home MCC Home Mobile Country Code is a three digit unique code which identifies a country or geographical area. It should support any 3 digits hexa decimal number or none.
CommonDbAging This parameter verifies the aging of UDR record. Default: On or Off
StoreSubscriberInfo Enables or disables storing subscriber location information in UDR when an ATI (Any Time Interrogation) query times out and the configured default action is fallback. Supported values are Yes and No.

Default value: No

You can perform edit task on vSTP>Configuration>SFAPP Options page.

Editing a SFAPP Option

Perform this procedure to change the field values for a selected SFAPP Option. (The SFAPP Option Name field cannot be changed.):
  1. Select the SFAPP Option row to be edited.
  2. Click Edit
  3. Enter the updated values.
  4. Click OK, Apply, or Cancel