Note:
The 10GbE transceiver modules are applicable for the Dual-Port 10 Gigabit-Ethernet PCIe 2.0 Copper/Fiber SFP+ card and not applicable to the Universal Fiber cards.
To use the 10 GbE network ports, you must provide Small Form-factor Pluggable Plus (SFP+) transceivers and/or cables (either optical or copper) to connect the network ports to your existing 10 GbE network infrastructure. The Oracle Exalytics In-Memory Machine does not ship with SFP+ transceivers or 10 GbE cables. You must purchase them separately.For copper cables, you can purchase the following cables from Oracle. These cables have built-in SFP+ transceivers, and there is no need to purchase separate SFP+ transceivers for the network ports on the Oracle Exalytics In-Memory Machine.
Table 4-2 Cables
Name | Length | Oracle Part Number |
---|---|---|
TwinAx 1m |
1m |
X2130-1M |
TwinAx 3m |
3m |
X2130-3M |
TwinAx 5m |
5m |
X2130-5M |
TwinAx 10m |
10m |
X2130-10M |
For optical cables, you must purchase SFP+ transceivers (either Short Range (SR) or Long Range (LR)) for each of the network ports, and then plug in the appropriate optical cable. Currently Oracle sells both the SR and LR SFP+ transceivers.
Table 4-3 Transceivers
Name | Part Number |
---|---|
10 GbE Transceiver SR (SFP+) |
X2129A-N |
10 GbE Transceiver LR (SFP+) |
X5562A-Z |
In addition to these transceivers, you must purchase the appropriate LC-LC terminated fiber optic cables from a third party vendor.