This appendix lists and describes silent installation install_cfg.xml parameters for Oracle Communications Order and Service Management (OSM).
Table D-1 lists the WebLogic parameters for a silent installation of OSM.
Table D-1 WebLogic Parameters for OSM Silent Installation
Parameter Name | Description |
---|---|
Configure-BEA-WebLogic |
Set to Yes to configure the WebLogic domain or No not to configure the domain. |
JBoss-lib-dir |
Directory in which the JBoss Java libraries are located. |
BEA-WebLogic-Host |
WebLogic host name or IP Address. |
BEA-WebLogic-Port |
WebLogic administration server port number. |
WebLogic-System-User |
OSM WebLogic domain administrator user name. |
WebLogic-System-Password |
OSM WebLogic domain administrator password. |
OSM-WLS-Server-Name |
In a clustered environment, the OSM WebLogic cluster name. In a non-clustered environment, the administration server name. |
OSM-WLS-Server-Port |
In a clustered environment, the port number of any one managed server in the cluster. Do not use the proxy port. In a non-clustered environment, the port number of the administration server. |
Oracle-Server-Host |
Host name of the database instance. Use this parameter for a non-Oracle-RAC database. |
Oracle-Server-Port |
Port number on which the database is listening. Use this parameter for a non-Oracle-RAC database. |
Oracle-SID |
Oracle SID of a non-Oracle-RAC database instance. |
schema_username |
OSM database schema owner name. |
schema_password |
OSM database schema owner password. |
Connection-Pool-Initial-Capacity |
Initial capacity for Connection Pool. |
Connection-Pool-Maximum-Capacity |
Maximum capacity for Connection Pool. |
Connection-Pool-Capacity-Increment |
Number of connections added when the connection pool maintained by the WebLogic server is exhausted. |
OSM-Administrator-User |
OSM Administrator user name. |
OSM-Administrator-Password |
OSM Administrator password. |
Studio-Admin-User |
The Oracle Communications Design Studio administrator user. Default is deployAdmin. |
Studio-Admin-Password |
The Design Studio administrator user password. |
OSM-Internal-Password |
The Core OSM user (oms-internal) password |
OSM-Automation-Password |
The OSM automation user (oms-automation) password |
Switch-Database |
Set to Yes to alter the existing OSM data source configuration or to create the OSM data source configuration if none exists. Set to No to leave the existing database configuration unaltered. Note: In production mode you must set this parameter to No because you cannot alter the existing OSM data source configuration. |
RAC-Database |
Set to Yes to configure an Oracle RAC database or No not to configure an Oracle RAC database. |
JMS-Store-Type |
Type of JMS store to be used by the OSM server. Values are File, JDBC, or NoChange. Default is File. |
BEA-WebLogic-SSL-Port |
Set only if SSL is used, the WebLogic Administration Server's SSL port number. |
Use-SSL-Connection |
Set to Yes to use an SSL connection to the WebLogic Administration Server or No not to use an SSL connection. |
SSL-Key-Store |
Set only if SSL is used, location of the key store file. |
Oracle-Service-Name |
Name of the service used for a non-Oracle-RAC database instance. |
OSM-Database-Timezone-Offset |
OSM database timezone offset. (The non-Daylight-Saving-Time offset of the database timezone from GMT in seconds.) |
RAC-Type |
Type of Oracle RAC database configuration. Values are ActiveActive or ActivePassive (default). Applies only if RAC-Database is set to Yes. |
RAC-Listener |
Set only to configure an Oracle RAC database. Values are Remote or Local. |
Database-Server-Host-N |
Host name of an Oracle RAC database instance. Only use this parameter when configuring an Oracle RAC database, where N is the number of the Oracle RAC database instance. When the value of RAC-Listener is Remote, the value of this parameter must be the same for all instances. When the value of RAC-Listener is Local, the value of either this parameter or Database-Server-Port-N must be different for all instances. |
Database-Server-Port-N |
Port number on which the an Oracle RAC database is listening. Only use this parameter when configuring an Oracle RAC database, where N is the number of the Oracle RAC database instance. When the value of RAC-Listener is Remote, the value of this parameter must be the same for all instances. When the value of RAC-Listener is Local, the value of either this parameter or Database-Server-Host-N must be different for all instances. |
Database-Server-SID-N |
System identifier of the an Oracle RAC database instance. Only use this parameter when configuring an Oracle RAC database, where N is the number of the Oracle RAC database instance. When the value of RAC-Listener is Remote, this parameter must be specified. The value must be unique for all instances. When the value of RAC-Listener is Local, either this parameter or Oracle-Service-Name-N must be specified. Specify the same parameter for all instances. |
Oracle-Service-Name-N |
Name of the service used for an Oracle RAC database instance. Only use this parameter when configuring an Oracle RAC database, where N is the number of the Oracle RAC database instance. When the value of RAC-Listener is Remote, this parameter must be specified. The value must be the same for all instances. When the value of RAC-Listener is Local, either this parameter or Database-Server-SID-N must be specified. Specify the same parameter for all instances. |
JTA-Timeout-Value |
Number of seconds that an active transaction is allowed to be in the first phase of a two-phase commit transaction before being rolled back. Oracle recommends setting this to 600. |
Start-Oms-Ear |
Set to true if you want OSM to start when installation is complete. Set to false if you do not want OSM to start when installation is complete. You can set this value to false in an upgrade when you want to ensure that you can perform WebLogic configuration before OSM begins to process any queued orders. Otherwise, you should set it to true. |
Create-Coherence-Config |
Set to true if you want the Installer to create a coherence cluster. Set to false if you do not want the Installer to create a coherence cluster. |
Coherence-Cluster-Name |
Name of the coherence cluster. |
Coherence-Cluster-Unicast-Port |
Unicast port number of the coherence cluster. |
Number-Coherence-Well-Known-Addresses |
Number of coherence cluster Well Known Address (WKA) members. |
Well-Known-Address-Listen-Address-n |
The WKA member's server address, where n is the ordinal of the WKA member. |
Configure-Job-Orders |
Determines whether the Job Orders product cartridge is deployed by the installer. Note: This parameter is not applicable for silent installation. To manually deploy product cartridges, see OSM_home/ProductCartridges/install/ReadMe.txt for instructions about manually deploying the product cartridges after you have installed OSM. |
Frontend-Host |
The listen address of the HTTP proxy server for the WebLogic cluster. |
Frontend-HTTP-Port |
The HTTP listen port of the HTTP proxy server. |
Frontend-HTTPS-Port |
The HTTPS listen port of the HTTP proxy server. |
Configuring the OSM parameters lets you customize web client behavior and enter specific information in the worklist rows, or the notification e-mail address or any of the nodes you see. Set these parameters depending on your preferences.
Table D-2 lists the OSM parameters for a silent installation of OSM.
Table D-2 OSM Parameters for OSM Silent Installation
Parameter Name | Description |
---|---|
Session-Timeout |
Time in minutes that Order Management web client and Task web client sessions remain active. |
Server-Domain-Suffix |
Domain suffix for the computer(s) on which the OSM server will run. |
Support-Cluster |
Provides special support for WebLogic clusters when selected. |
Attachment-Path |
The path used to locate the WebLogic file (T3) service used for storing OSM remark attachments. |
Maximum-Attachment-Size |
Maximum attachment size, in MB, that can be appended to a remark. |
Remark-Change-Timeout |
Length of time in hours that a remark can be edited following creation. |
Worklist-Rows-Retrieved |
Number of rows retrieved when the worklist is refreshed. |
Worklist-Rows-per-Page |
Number of rows displayed on each worklist page. |
Query-Rows-Retrieved |
Number of rows retrieved when a query is run. |
Query-Rows-per-Page |
Number of rows displayed on each query results page. |
Notification-Rows-Retrieved |
Number of rows retrieved when the notification is refreshed. |
Notification-Rows-per-Page |
Number of rows displayed on each notification page. |
Notification-Email-Server |
DNS name or IP address of your e-mail server. |
Notification-Server-Port |
Port on which the e-mail server is listening. |
Notification-Email-Address |
OSM Administrator's e-mail address. |
Read-Only-Field-Length |
Maximum length of read only fields in the Order Editor. |
Event-Buffer-Interval |
Interval used to buffer events before sending them to the automation framework. |
Landing-Page |
The page that by default all Task web client users will be directed to at log in. |
Display-Namespace-Version |
Set to 1 to show the cartridge namespace version on the Task web client's 'Create Order' page, or set to 0 to not display the cartridge namespace version on this page. |
WLS-Server-SSL-Port |
SSL Port on which the OSM server is listening. |
Task-Processor-Interval |
Enter the number of seconds between task processor polls. |
Max-Rule-Processor-Count |
Enter the maximum number of rule task processors used to evaluate rules. |
Max-Delay-Processor-Count |
Enter the maximum number of delay task processors used to evaluate delays. |
Handler-Factory |
For a clustered installation, set this parameter to com.mslv.oms.handler.cluster.ClusteredHandlerFactory. For a non-clustered installation, set this parameter to com.mslv.oms.security.HandlerFactory. |
The database parameters are optional except for the Database-Admin-Password.
Table D-3 describes the Database Parameters for OSM silent installation.
Table D-3 Database Parameters for OSM Silent Installation
Parameter Name | Description |
---|---|
Analyze-Database-Schema |
Set to Yes to check to determine if a database upgrade is required or No to skip the check. |
Model-Index-Tablespace |
The tablespace in which OSM model index tables will be created. |
Error-Property |
dbm.error. |
Orders-per-Partition |
The number of orders stored per Oracle database partition (assumes a value of Yes in the Use-Partitioning parameter). |
Default-Tablespace |
The tablespace in which by default all OSM tables will be installed. |
Summary-Start-Datetime |
Date and Time information for Summary. |
Summary-PriorTo-Year |
Summary Prior To year. |
Order-Index-Tablespace |
The tablespace in which OSM order index tables will be created. |
Create-Or-Upgrade-Database-Schema |
Set to Create to create a new database schema. Set to Upgrade to upgrade an existing database schema. |
Order-Data-Tablespace |
Tablespace in which OSM order data tables will be created. |
Use-Partitioning |
Set to true to use Oracle database partitioning for order data tables or false not to use partitioning. |
RuleEngine-Schema-Username |
Name to use for the OSM 'rule engine' Oracle database schema. |
Halt-on-Warning |
Set to true to stop the installation when a warning is produced or false to continue the installation even when warnings are produced. |
Model-Data-Tablespace |
Tablespace in which OSM model data tables will be created. |
Database-Admin-Password |
Database administrator password |
Number-of-Subpartitions |
Number of sub-partitions per partition (assumes a Use-Partitioning parameter value of Yes). |
Existing-Schema-Action |
Set to upgrade. |
Use-Localized-Data |
Set to true to use localized data or false not to use localized data. Setting this value to true requires that you also set the Localization-Jar-File parameter. |
Database-Admin-Username |
The Oracle database administrator user name. |
Temporary-Tablespace |
Temporary tablespace used for OSM-related database operations. |
Halt-on-Error |
Set to true (default) to stop the installation when an error occurs or false to continue the installation even when errors occur. |
Warning-Property |
dbm.warning. |
RuleEngine-Schema-Password |
Password to use for the OSM rule engine Oracle database schema. |
Localization-Jar-File |
Full path to the jar file containing localized OSM initial data. This parameter is mandatory when Use-Localized-Data is set to true. |
Reporting-Schema-Password |
Password to use for the OSM reporting interface Oracle database schema. |
Reporting-Schema-Username |
Name to use for the OSM reporting interface Oracle database schema. |