22106 - Ingress Message Discarded: DraWorker Ingress MessageRate Control

Alarm Group:
DIAM
Description:
An ingress message is discarded due to connection (or DraWorker) ingress message rate exceeding connection (or DraWorker) maximum  ingress MPS.
Severity:
Major
Instance:
<MPHostName>
HA Score:
Normal
Auto Clear Seconds:
0 (zero)
OID:
eagleXgDiameterIngressMessageDiscardedAlarmNotify
Cause:
An ingress message is discarded or rejected in the following congestion scenarios:
  • Connection maximum message rate exceeded.
  • DraWorker maximum message rate exceeded.
Diagnostic Information:
  1. From the event history, check the current message rate and the threshold rate for the diameter connection/DAMP node.
  2. Check the maximum reserved ingress MPS for the DAMP on the Active Overseer server by navigating to Diameter > Configuration > Connection Capacity Dashboard > Connection Reserved Ingress MPS Table.
  3. Ensure that the ingress MPS is less than the threshold for the diameter connection/DAMP.

Recovery:

  1. The ingress MPS on the DraWorker is exceeding the MP Maximum ingress MPS. Maybe one or more DraWorkers is unavailable and traffic has been distributed to the remaining DraWorkers.
  2. See if one or more peers are generating more traffic than is normally expected.
  3. Make sure a sufficient number of DraWorkers is provisioned.
  4. If the problem persists, it is recommended to contact My Oracle Support.