Recovery:

1. RSP/Destination status can be monitored from the SOAM GUI by navigating to SS7/Sigtran > Maintenance > Remote Signaling Points.
   • If the RSP/Destination becomes unavailable due to a link set failure, the MP server automatically attempts to recover all links not manually disabled.
   • If the RSP/Destination becomes unavailable due to the receipt of a TFP, the route's status is periodically audited by sending RST messages to the adjacent point code which sent the TFP.
2. Navigate to SS7/Sigtran > Maintenance > Link Sets to check the status of linkset links to the adjacent server.
3. Navigate to Transport Manager > Maintenance > Transport to check the SCTP status to the adjacent server.
4. Verify IP network connectivity exists between the MP server and the adjacent servers.
5. If all the connections to adjacent server are OK, then check the connections between adjacent server and Remote Signaling Point. The specific steps depend on the adjacent server type.
6. Check the event history logs for additional SS7 events or alarms from this MP server.
7. Verify the adjacent server is not under maintenance.
8. If the problem persists, it is recommended to contact My Oracle Support if further assistance is needed.