You manage the archived redo log files by completing tasks such as choosing between
ARCHIVELOG mode and specifying archive destinations.
Using Oracle Managed Files for information about creating an archived redo log that is both created and managed by the Oracle Database server
Oracle Real Application Clusters Administration and Deployment Guide for information specific to archiving in the Oracle Real Application Clusters environment
Oracle Database lets you save filled groups of redo log files to one or more offline destinations, known collectively as the archived redo log.
The process of turning redo log files into archived redo log files is called archiving. This process is only possible if the database is running in
ARCHIVELOG mode. You can choose automatic or manual archiving.
An archived redo log file is a copy of one of the filled members of a redo log group. It includes the redo entries and the unique log sequence number of the identical member of the redo log group. For example, if you are multiplexing your redo log, and if group 1 contains identical member files
b_log1, then the archiver process (ARCn) will archive one of these member files. Should
a_log1 become corrupted, then ARCn can still archive the identical
b_log1. The archived redo log contains a copy of every group created since you enabled archiving.
When the database is running in
ARCHIVELOG mode, the log writer process (LGWR) cannot reuse and hence overwrite a redo log group until it has been archived. The background process ARCn automates archiving operations when automatic archiving is enabled. The database starts multiple archiver processes as needed to ensure that the archiving of filled redo logs does not fall behind.
You can use archived redo log files to:
Recover a database
Update a standby database
Get information about the history of a database using the LogMiner utility
The following sources document the uses for archived redo log files:
You must choose between running your database in
The choice of whether to enable the archiving of filled groups of redo log files depends on the availability and reliability requirements of the application running on the database. If you cannot afford to lose any data in your database in the event of a disk failure, use
ARCHIVELOG mode. The archiving of filled redo log files can require you to perform extra administrative operations.
When you run your database in
NOARCHIVELOG mode, you disable the archiving of the redo log.
The database control file indicates that filled groups are not required to be archived. Therefore, when a filled group becomes inactive after a log switch, the group is available for reuse by LGWR.
NOARCHIVELOG mode protects a database from instance failure but not from media failure. Only the most recent changes made to the database, which are stored in the online redo log groups, are available for instance recovery. If a media failure occurs while the database is in
NOARCHIVELOG mode, you can only restore the database to the point of the most recent full database backup. You cannot recover transactions subsequent to that backup.
NOARCHIVELOG mode you cannot perform online tablespace backups, nor can you use online tablespace backups taken earlier while the database was in
ARCHIVELOG mode. To restore a database operating in
NOARCHIVELOG mode, you can use only whole database backups taken while the database is closed. Therefore, if you decide to operate a database in
NOARCHIVELOG mode, take whole database backups at regular, frequent intervals.
When you run a database in
ARCHIVELOG mode, you enable the archiving of the redo log.
The database control file indicates that a group of filled redo log files cannot be reused by LGWR until the group is archived. A filled group becomes available for archiving immediately after a redo log switch occurs.
The archiving of filled groups has these advantages:
A database backup, together with online and archived redo log files, guarantees that you can recover all committed transactions in the event of an operating system or disk failure.
If you keep archived logs available, you can use a backup taken while the database is open and in normal system use.
You can keep a standby database current with its original database by continuously applying the original archived redo log files to the standby.
You can configure an instance to archive filled redo log files automatically, or you can archive manually. For convenience and efficiency, automatic archiving is usually best. Figure 12-1 illustrates how the archiver process (ARC0 in this illustration) writes filled redo log files to the database archived redo log.
If all databases in a distributed database operate in
ARCHIVELOG mode, you can perform coordinated distributed database recovery. However, if any database in a distributed database is in
NOARCHIVELOG mode, recovery of a global distributed database (to make all databases consistent) is limited by the last full backup of any database operating in
Figure 12-1 Redo Log File Use in ARCHIVELOG Mode
It is good practice to move archived redo log files and corresponding database backups from the local disk to permanent offline storage media such as tape. A primary value of archived logs is database recovery, so you want to ensure that these logs are safe should disaster strike your primary database.
You can set the archiving mode for your database and adjust the number of archiver processes.
Your Oracle operating system specific documentation for additional information on controlling archiving modes
You set the initial archiving mode as part of database creation in the
CREATE DATABASE statement.
Usually, you can use the default of
NOARCHIVELOG mode at database creation because there is no need to archive the redo information generated by that process. After creating the database, decide whether to change the initial archiving mode.
If you specify
ARCHIVELOG mode, you must have initialization parameters set that specify the destinations for the archived redo log files (see "Setting Initialization Parameters for Archive Destinations").
To change the archiving mode of the database, use the
ALTER DATABASE statement with the
To change the archiving mode, you must be connected to the database with administrator privileges (
The following steps switch the database archiving mode from
An open database must first be closed and any associated instances shut down before you can switch the database archiving mode. You cannot change the mode from
NOARCHIVELOG if any data files need media recovery.
Before making any major change to a database, always back up the database to protect against any problems. This will be your final backup of the database in
NOARCHIVELOG mode and can be used if something goes wrong during the change to
ARCHIVELOG mode. See Oracle Database Backup and Recovery User's Guide for information about taking database backups.
To enable or disable archiving, the database must be mounted but not open.
ALTER DATABASE ARCHIVELOG; ALTER DATABASE OPEN;
Changing the database archiving mode updates the control file. After changing the database archiving mode, you must back up all of your database files and control file. Any previous backup is no longer usable because it was taken in
Oracle Real Application Clusters Administration and Deployment Guide for more information about switching the archiving mode when using Real Application Clusters
For convenience and efficiency, automatic archiving is usually best. However, you can configure your database for manual archiving only.
When you operate your database in manual
ARCHIVELOG mode, you must archive inactive groups of filled redo log files or your database operation can be temporarily suspended.
To operate your database in manual archiving mode:
Follow the procedure described in "Changing the Database Archiving Mode ", but replace the
DATABASE statement with the following statement:
ALTER DATABASE ARCHIVELOG MANUAL;
Connect to the database as a user with administrator privileges.
Ensure that the database is either mounted or open.
ALTER SYSTEM statement with the
ARCHIVE LOG clause to manually archive filled redo log files. For example, the following statement archives all unarchived redo log files:
ALTER SYSTEM ARCHIVE LOG ALL;
When you use manual archiving mode, you cannot specify any standby databases in the archiving destinations.
Even when automatic archiving is enabled, you can use manual archiving for such actions as rearchiving an inactive group of filled redo log members to another location. In this case, it is possible for the instance to reuse the redo log group before you have finished manually archiving, and thereby overwrite the files. If this happens, the database writes an error message to the alert log.
LOG_ARCHIVE_MAX_PROCESSES initialization parameter specifies the number of ARCn processes that the database initially starts. The default is four processes.
To avoid any run-time overhead of starting additional ARCn processes:
LOG_ARCHIVE_MAX_PROCESSES initialization parameter to specify that up to 30 ARCn processes be started at instance startup.
LOG_ARCHIVE_MAX_PROCESSES parameter is dynamic, so you can change it using the
ALTER SYSTEM statement.
The following statement configures the database to start six ARCn processes upon startup:
ALTER SYSTEM SET LOG_ARCHIVE_MAX_PROCESSES=6;
The statement also has an immediate effect on the currently running instance. It increases or decreases the current number of running ARCn processes to six.
Before you can archive redo logs, you must determine the destination to which you will archive, and familiarize yourself with the various destination states.
The dynamic performance (V$) views, listed in "Viewing Information About the Archived Redo Log", provide all needed archive information.
You can choose to archive redo logs to a single destination or to multiple destinations.
Destinations can be local—within the local file system or an Oracle Automatic Storage Management (Oracle ASM) disk group—or remote (on a standby database). When you archive to multiple destinations, a copy of each filled redo log file is written to each destination. These redundant copies help ensure that archived logs are always available in the event of a failure at one of the destinations.
To archive to only a single destination:
Specify that destination using the
LOG_ARCHIVE_DEST initialization parameter.
To archive to multiple destinations:
Choose to archive to two or more locations using the
n initialization parameters, or to archive only to a primary and secondary destination using the
LOG_ARCHIVE_DUPLEX_DEST initialization parameters.
For local destinations, in addition to the local file system or an Oracle ASM disk group, you can archive to the Fast Recovery Area. The database uses the Fast Recovery Area to store and automatically manage disk space for a variety of files related to backup and recovery. See Oracle Database Backup and Recovery User's Guide for details about the Fast Recovery Area.
Typically, you determine archive log destinations during database planning, and you set the initialization parameters for archive destinations during database installation. However, you can use the
SYSTEM command to dynamically add or change archive destinations after your database is running. Any destination changes that you make take effect at the next log switch (automatic or manual).
The following table summarizes the archive destination alternatives, which are further described in the sections that follow.
n is an integer from 1 to 31. Archive destinations 1 to 10 are available for local or remote locations. Archive destinations 11 to 31 are available for remote locations only.
Local or remote
You can use the
n initialization parameter to specify different destinations for archived logs.
n initialization parameter (where n is an integer from 1 to 31) to specify from one to 31. Each numerically suffixed parameter uniquely identifies an individual destination.
You specify the location for
n using the keywords explained in the following table:
A local file system location or Oracle ASM disk group
The Fast Recovery Area
Remote archival through Oracle Net service name.
If you use the
LOCATION keyword, specify one of the following:
A valid path name in your operating system's local file system
An Oracle ASM disk group
USE_DB_RECOVERY_FILE_DEST to indicate the Fast Recovery Area
If you specify
SERVICE, supply a net service name that Oracle Net can resolve to a connect descriptor for a standby database. The connect descriptor contains the information necessary for connecting to the remote database.
Perform the following steps to set the destination for archived redo log files using the
n initialization parameter:
ninitialization parameter to specify from one to 31 archiving locations. For example, enter:
LOG_ARCHIVE_DEST_1 = 'LOCATION = /disk1/archive' LOG_ARCHIVE_DEST_2 = 'LOCATION = /disk2/archive' LOG_ARCHIVE_DEST_3 = 'LOCATION = +RECOVERY/orcl/arc_3'
If you are archiving to a standby database, then use the
SERVICE keyword to specify a valid net service name. For example, enter:
LOG_ARCHIVE_DEST_4 = 'SERVICE = standby1'
LOG_ARCHIVE_FORMATinitialization parameter, using
%tto include the thread number as part of the file name,
%sto include the log sequence number, and
%rto include the resetlogs ID (a timestamp value represented in ub4). Use capital letters (
%R) to pad the file name to the left with zeroes.
The database requires the specification of resetlogs ID (
%r) when you include the
LOG_ARCHIVE_FORMAT parameter. The default for this parameter is operating system dependent.
The incarnation of a database changes when you open it with the
RESETLOGS option. Specifying
%r causes the database to capture the resetlogs ID in the archived redo log file name. See Oracle Database Backup and Recovery User's Guide for more information about this method of recovery.
The following example shows a setting of
LOG_ARCHIVE_FORMAT = arch_%t_%s_%r.arc
This setting will generate archived logs as follows for thread 1; log sequence numbers 100, 101, and 102; resetlogs ID 509210197. The identical resetlogs ID indicates that the files are all from the same database incarnation:
/disk1/archive/arch_1_100_509210197.arc, /disk1/archive/arch_1_101_509210197.arc, /disk1/archive/arch_1_102_509210197.arc /disk2/archive/arch_1_100_509210197.arc, /disk2/archive/arch_1_101_509210197.arc, /disk2/archive/arch_1_102_509210197.arc /disk3/archive/arch_1_100_509210197.arc, /disk3/archive/arch_1_101_509210197.arc, /disk3/archive/arch_1_102_509210197.arc
LOG_ARCHIVE_FORMAT initialization parameter is ignored in some cases. See Oracle Database Reference for more information about this parameter.
To specify a maximum of two locations, use the
LOG_ARCHIVE_DEST parameter to specify a primary archive destination and the
LOG_ARCHIVE_DUPLEX_DEST to specify an optional secondary archive destination.
All locations must be local. Whenever the database archives a redo log, it archives it to every destination specified by either set of parameters.
Perform the following steps the use method 2:
LOG_ARCHIVE_DUPLEX_DESTparameter (you can also specify
LOG_ARCHIVE_DUPLEX_DESTdynamically using the
ALTER SYSTEMstatement). For example, enter:
LOG_ARCHIVE_DEST = '/disk1/archive' LOG_ARCHIVE_DUPLEX_DEST = '/disk2/archive'
LOG_ARCHIVE_FORMATinitialization parameter as described in step 2 for method 1.
If you configure a Fast Recovery Area (by setting the
DB_RECOVERY_FILE_DEST_SIZE parameters) and do not specify any local archive destinations, the database automatically selects the Fast Recovery Area as a local archive destination and sets
You must ensure that there is sufficient disk space at all times for archive log destinations. If the database encounters a disk full error as it attempts to archive a log file, a fatal error occurs and the database stops responding. You can check the alert log for a disk full message.
Oracle Database Reference for additional information about the initialization parameters used to control the archiving of redo logs
Oracle Data Guard Concepts and Administration for information about using the
n initialization parameter for specifying a standby destination. There are additional keywords that can be specified with this initialization parameter that are not discussed in this book.
Oracle Database Net Services Administrator's Guide for a discussion of net service names and connect descriptors.
Oracle Database Backup and Recovery User's Guide for information about the Fast Recovery Area
Several variables determine an archive destination’s status.
Each archive destination has the following variable characteristics that determine its status:
Valid/Invalid: indicates whether the disk location or service name information is specified and valid
Enabled/Disabled: indicates the availability state of the location and whether the database can use the destination
Active/Inactive: indicates whether there was a problem accessing the destination
Several combinations of these characteristics are possible. To obtain the current status and other information about each destination for an instance, query the
ENABLE indicates that the database can use the destination.
DEFER indicates that the location is temporarily disabled.
ALTERNATE indicates that the destination is an alternate. The availability state of an alternate destination is
DEFER. If its parent destination fails, the availability state of the alternate becomes
ALTERNATE cannot be specified for destinations
To specify that a location be an archive destination only in the event of a failure of another destination, you can make it an alternate destination. Both local and remote destinations can be alternates.
The following example makes
LOG_ARCHIVE_DEST_4 an alternate for
ALTER SYSTEM SET LOG_ARCHIVE_DEST_4 = 'LOCATION=/disk4/arch'; ALTER SYSTEM SET LOG_ARCHIVE_DEST_3 = 'LOCATION=/disk3/arch MAX_FAILURE=1 ALTERNATE=LOG_ARCHIVE_DEST_4'; ALTER SYSTEM SET LOG_ARCHIVE_DEST_STATE_4=ALTERNATE; SQL> SELECT dest_name, status, destination FROM v$archive_dest; DEST_NAME STATUS DESTINATION ----------------------- --------- ---------------------------------------------- LOG_ARCHIVE_DEST_1 VALID /disk1/arch LOG_ARCHIVE_DEST_2 VALID /disk2/arch LOG_ARCHIVE_DEST_3 VALID /disk3/arch LOG_ARCHIVE_DEST_4 ALTERNATE /disk4/arch
The two modes of transmitting archived logs to their destination are normal archiving transmission and standby transmission mode. Normal transmission involves transmitting files to a local disk. Standby transmission involves transmitting files through a network to either a local or remote standby database.
In normal transmission mode, the archiving destination is another disk drive of the database server.
In this configuration archiving does not contend with other files required by the instance and can complete more quickly. Specify the destination with either the
In standby transmission mode, the archiving destination is either a local or remote standby database.
You can maintain a standby database on a local disk, but Oracle strongly encourages you to maximize disaster protection by maintaining your standby database at a remote site.
Oracle Database Net Services Administrator's Guide for information about connecting to a remote database using a service name
Sometimes archive destinations can fail, causing problems when you operate in automatic archiving mode. Oracle Database provides procedures to help you minimize the problems associated with destination failure.
The optional initialization parameter
n determines the minimum number of destinations to which the database must successfully archive a redo log group before it can reuse online log files. The default value is 1. Valid values for n are 1 to 2 if you are using duplexing, or 1 to 31 if you are multiplexing.
n initialization parameter lets you specify whether a destination is
OPTIONAL (the default) or
Set the destination as
OPTIONAL (the default) or
MANDATORY in the
n initialization parameter.
n parameter uses all
MANDATORY destinations plus some number of non-standby
OPTIONAL destinations to determine whether LGWR can overwrite the online log. The following rules apply:
MANDATORY attribute for a destination is the same as specifying
You must have at least one local destination, which you can declare
MANDATORY attribute can only be specified for destinations
When you specify a value for
n, Oracle Database will treat at least one local destination as
MANDATORY, because the minimum value for
LOG_ARCHIVE_MIN_SUCCEED_DEST is 1.
LOG_ARCHIVE_MIN_SUCCEED_DEST value cannot be greater than the number of destinations, nor can it be greater than the number of
MANDATORY destinations plus the number of
OPTIONAL local destinations.
MANDATORY destination, and the database overwrites the online log without transferring the archived log to the standby site, then you must transfer the log to the standby manually.
If you are duplexing the archived logs, you can establish which destinations are mandatory or optional by using the
LOG_ARCHIVE_DUPLEX_DEST parameters. The following rules apply:
Any destination declared by
LOG_ARCHIVE_DEST is mandatory.
Any destination declared by
LOG_ARCHIVE_DUPLEX_DEST is optional if
LOG_ARCHIVE_MIN_SUCCEED_DEST = 1 and mandatory if
LOG_ARCHIVE_MIN_SUCCEED_DEST = 2.
You can see the relationship between the
LOG_ARCHIVE_MIN_SUCCEED_DEST initialization parameters most easily through sample scenarios.
In this scenario, you archive to three local destinations, each of which you declare as
Table 12-1 illustrates the possible values for
n in this case.
Table 12-1 LOG_ARCHIVE_MIN_SUCCEED_DEST Values for Scenario 1
The database can reuse log files only if at least one of the
The database can reuse log files only if at least two of the
The database can reuse log files only if all of the
4 or greater
This scenario shows that even though you do not explicitly set any of your destinations to
MANDATORY using the
n parameter, the database must successfully archive to one or more of these locations when
LOG_ARCHIVE_MIN_SUCCEED_DEST is set to 1, 2, or 3.
In this scenario, you archive to
OPTIONAL local destinations.
Consider a case in which:
You specify two
You specify two
No destination is a standby database.
Table 12-2 shows the possible values for
Table 12-2 LOG_ARCHIVE_MIN_SUCCEED_DEST Values for Scenario 2
The database ignores the value and uses the number of
The database can reuse log files even if no
The database can reuse logs only if at least one
The database can reuse logs only if both
5 or greater
This case shows that the database must archive to the destinations you specify as
MANDATORY, regardless of whether you set
LOG_ARCHIVE_MIN_SUCCEED_DEST to archive to a smaller number of destinations.
REOPEN attribute of the
n parameter to specify whether and when ARCn should attempt to rearchive to a failed destination following an error.
REOPEN applies to all errors, not just
n sets the minimum number of seconds before ARCn should try to reopen a failed destination. The default value for n is 300 seconds. A value of 0 is the same as turning off the
REOPEN attribute; ARCn will not attempt to archive after a failure. If you do not specify the
REOPEN keyword, ARCn will never reopen a destination following an error.
You cannot use
REOPEN to specify the number of attempts ARCn should make to reconnect and transfer archived logs. The
REOPEN attempt either succeeds or fails.
When you specify
REOPEN for an
OPTIONAL destination, the database can overwrite online logs if there is an error. If you specify
REOPEN for a
MANDATORY destination, the database stalls the production database when it cannot successfully archive. In this situation, consider the following options:
Archive manually to the failed destination.
Change the destination by deferring the destination, specifying the destination as optional, or changing the service.
Drop the destination.
When using the
REOPEN keyword, note the following:
ARCn reopens a destination only when starting an archive operation from the beginning of the log file, never during a current operation. ARCn always retries the log copy from the beginning.
If you specified
REOPEN, either with a specified time the default, ARCn checks to see whether the time of the recorded error plus the
REOPEN interval is less than the current time. If it is, ARCn retries the log copy.
REOPEN clause successfully affects the
ACTIVE=TRUE destination state. The
ENABLED states are not changed.
Something wrong here. A destination can be inactive, or valid, or disabled. There is no ACTIVE status. So I think maybe it should say, "The REOPEN clause sets the destination status to VALID" ...? DL
Background processes always write to a trace file when appropriate. In the case of the archivelog process, you can control the output that is generated to the trace file.
To control the output that is generated to the trace file for the archivelog process:
LOG_ARCHIVE_TRACE initialization parameter to specify a trace level, such as 0, 1, 2, 4, 8, and so on.
You can combine tracing levels by specifying a value equal to the sum of the individual levels that you would like to trace. For example, setting
LOG_ARCHIVE_TRACE=12 will generate trace level 8 and 4 output. You can set different values for the primary and any standby database.
The default value for the
LOG_ARCHIVE_TRACE parameter is 0. At this level, the archivelog process generates appropriate alert and trace entries for error conditions.
You can change the value of this parameter dynamically using the
ALTER SYSTEM statement. For example:
ALTER SYSTEM SET LOG_ARCHIVE_TRACE=12;
Changes initiated in this manner will take effect at the start of the next archiving operation.
Oracle Database Reference for more information about the
LOG_ARCHIVE_TRACE initialization parameter, including descriptions of the valid values for this parameter
Oracle Data Guard Concepts and Administration for information about using this parameter with a standby database
You can display information about the archived redo log using dynamic performance views or the
You can query a set of dynamic performance views for information about archived redo log files.
Several dynamic performance views contain useful information about archived redo log files, as summarized in the following table.
|Dynamic Performance View||Description|
Shows if the database is in
Displays historical archived log information from the control file. If you use a recovery catalog, the
Describes the current instance, all archive destinations, and the current value, mode, and status of these destinations.
Displays information about the state of the various archive processes for an instance.
Contains information about any backups of archived logs. If you use a recovery catalog, the
Displays all redo log groups for the database and indicates which need to be archived.
Contains log history information such as which logs have been archived and the SCN range for each archived log.
For example, the following query displays which redo log group requires archiving:
SELECT GROUP#, ARCHIVED FROM SYS.V$LOG; GROUP# ARC -------- --- 1 YES 2 NO
SELECT LOG_MODE FROM SYS.V$DATABASE; LOG_MODE ------------ NOARCHIVELOG
Oracle Database Reference for detailed descriptions of dynamic performance views
The SQL*Plus command
ARCHIVE LOG LIST displays archiving information for the connected instance.
SQL> ARCHIVE LOG LIST Database log mode Archive Mode Automatic archival Enabled Archive destination D:\oracle\oradata\IDDB2\archive Oldest online log sequence 11160 Next log sequence to archive 11163 Current log sequence 11163
This display tells you all the necessary information regarding the archived redo log settings for the current instance:
The database is currently operating in
Automatic archiving is enabled.
The archived redo log destination is D:\oracle\oradata\IDDB2\archive.
The oldest filled redo log group has a sequence number of 11160.
The next filled redo log group to archive has a sequence number of 11163.
The current redo log file has a sequence number of 11163.
SQL*Plus User's Guide and Reference for more information on the
ARCHIVE LOG LIST command