For a default installation, Oracle Database automatically manages undo. There is typically no need for DBA intervention. However, if your installation uses Oracle Flashback operations, you may need to perform some undo management tasks to ensure the success of these operations.
Using Oracle Managed Files for information about creating an undo tablespace whose data files are both created and managed by Oracle Database.
Oracle Database creates and manages information that is used to roll back, or undo, changes to the database. Such information consists of records of the actions of transactions, primarily before they are committed. These records are collectively referred to as undo.
Undo records are used to:
Roll back transactions when a
ROLLBACK statement is issued
Recover the database
Provide read consistency
Analyze data as of an earlier point in time by using Oracle Flashback Query
Recover from logical corruptions using Oracle Flashback features
ROLLBACK statement is issued, undo records are used to undo changes that were made to the database by the uncommitted transaction. During database recovery, undo records are used to undo any uncommitted changes applied from the redo log to the data files. Undo records provide read consistency by maintaining the before image of the data for users who are accessing the data at the same time that another user is changing it.
Oracle Database can manage undo information and space automatically.
Oracle provides a fully automated mechanism, referred to as automatic undo management, for managing undo information and space. With automatic undo management, the database manages undo segments in an undo tablespace.
Automatic undo management is the default mode for a newly installed database. An auto-extending undo tablespace named
UNDOTBS1 is automatically created when you create the database with Database Configuration Assistant (DBCA).
You can also create an undo tablespace explicitly. The methods of creating an undo tablespace are explained in "Creating an Undo Tablespace".
When the database instance starts, the database automatically selects the first available undo tablespace. If no undo tablespace is available, then the instance starts without an undo tablespace and stores undo records in the
SYSTEM tablespace. This is not recommended, and an alert message is written to the alert log file to warn that the system is running without an undo tablespace.
If the database contains multiple undo tablespaces, then you can optionally specify at startup that you want to use a specific undo tablespace. This is done by setting the
UNDO_TABLESPACE initialization parameter, as shown in this example:
UNDO_TABLESPACE = undotbs_01
If the tablespace specified in the initialization parameter does not exist, the
STARTUP command fails. The
UNDO_TABLESPACE parameter can be used to assign a specific undo tablespace to an instance in an Oracle Real Application Clusters environment.
The database can also run in manual undo management mode. In this mode, undo space is managed through rollback segments, and no undo tablespace is used.
Space management for rollback segments is complex. Oracle strongly recommends leaving the database in automatic undo management mode.
Optional, and valid only in automatic undo management mode. Specifies the name of an undo tablespace. Use only when the database has multiple undo tablespaces and you want to direct the database instance to use a particular undo tablespace.
When automatic undo management is enabled, if the initialization parameter file contains parameters relating to manual undo management, they are ignored.
Earlier releases of Oracle Database default to manual undo management mode. To change to automatic undo management, you must first create an undo tablespace and then change the
UNDO_MANAGEMENT initialization parameter to
AUTO. If your Oracle Database is Oracle9i or later and you want to change to automatic undo management, see Oracle Database Upgrade Guide for instructions.
UNDO_MANAGEMENT initialization parameter defaults to automatic undo management mode in Oracle Database 11g and later, but defaults to manual undo management mode in earlier releases. You must therefore use caution when upgrading a previous release to the current release. Oracle Database Upgrade Guide describes the correct method of migrating to automatic undo management mode, including information on how to size the undo tablespace.
The undo retention period is the minimum amount of time that Oracle Database attempts to retain old undo information before overwriting it.
When automatic undo management is enabled, there is always a current undo retention period, which is the minimum amount of time that Oracle Database attempts to retain old undo information before overwriting it.
After a transaction is committed, undo data is no longer needed for rollback or transaction recovery purposes. However, for consistent read purposes, long-running queries may require this old undo information for producing older images of data blocks. Furthermore, the success of several Oracle Flashback features can also depend upon the availability of older undo information. For these reasons, it is desirable to retain the old undo information for as long as possible.
Old (committed) undo information that is older than the current undo retention period is said to be expired and its space is available to be overwritten by new transactions. Old undo information with an age that is less than the current undo retention period is said to be unexpired and is retained for consistent read and Oracle Flashback operations.
Oracle Database automatically tunes the undo retention period based on undo tablespace size and system activity. You can optionally specify a minimum undo retention period (in seconds) by setting the
UNDO_RETENTION initialization parameter. The exact impact this parameter on undo retention is as follows:
UNDO_RETENTION parameter is ignored for a fixed size undo tablespace. The database always tunes the undo retention period for the best possible retention, based on system activity and undo tablespace size. See "Automatic Tuning of Undo Retention" for more information.
For an undo tablespace with the
AUTOEXTEND option enabled, the database attempts to honor the minimum retention period specified by
UNDO_RETENTION. When space is low, instead of overwriting unexpired undo information, the tablespace auto-extends. If the
MAXSIZE clause is specified for an auto-extending undo tablespace, when the maximum size is reached, the database may begin to overwrite unexpired undo information. The
UNDOTBS1 tablespace that is automatically created by DBCA is auto-extending.
Oracle Database automatically tunes the undo retention period based on how the undo tablespace is configured.
If the undo tablespace is configured with the
AUTOEXTEND option, the database dynamically tunes the undo retention period to be somewhat longer than the longest-running active query on the system. However, this retention period may be insufficient to accommodate Oracle Flashback operations. Oracle Flashback operations resulting in
old errors are the indicator that you must intervene to ensure that sufficient undo data is retained to support these operations. To better accommodate Oracle Flashback features, you can either set the
UNDO_RETENTION parameter to a value equal to the longest expected Oracle Flashback operation, or you can change the undo tablespace to fixed size.
If the undo tablespace is fixed size, the database dynamically tunes the undo retention period for the best possible retention for that tablespace size and the current system load. This best possible retention time is typically significantly greater than the duration of the longest-running active query.
If you decide to change the undo tablespace to fixed-size, you must choose a tablespace size that is sufficiently large. If you choose an undo tablespace size that is too small, the following two errors could occur:
DML could fail because there is not enough space to accommodate undo for new transactions.
Long-running queries could fail with a
old error, which means that there was insufficient undo data for read consistency.
See "Sizing a Fixed-Size Undo Tablespace" for more information.
Automatic tuning of undo retention is not supported for LOBs. This is because undo information for LOBs is stored in the segment itself and not in the undo tablespace. For LOBs, the database attempts to honor the minimum undo retention period specified by
UNDO_RETENTION. However, if space becomes low, unexpired LOB undo information may be overwritten.
To guarantee the success of long-running queries or Oracle Flashback operations, you can enable retention guarantee.
If retention guarantee is enabled, then the specified minimum undo retention is guaranteed; the database never overwrites unexpired undo data even if it means that transactions fail due to lack of space in the undo tablespace. If retention guarantee is not enabled, then the database can overwrite unexpired undo when space is low, thus lowering the undo retention for the system. This option is disabled by default.
Enabling retention guarantee can cause multiple DML operations to fail. Use with caution.
You enable retention guarantee by specifying the
RETENTION GUARANTEE clause for the undo tablespace when you create it with either the
CREATE DATABASE or
CREATE UNDO TABLESPACE statement. Or, you can later specify this clause in an
ALTER TABLESPACE statement. You disable retention guarantee with the
RETENTION NOGUARANTEE clause.
You can use the
DBA_TABLESPACES view to determine the retention guarantee setting for the undo tablespace. A column named
RETENTION contains a value of
APPLY is used for tablespaces other than the undo tablespace.
For a fixed-size undo tablespace, the database calculates the best possible retention based on database statistics and on the size of the undo tablespace.
For optimal undo management, rather than tuning based on 100% of the tablespace size, the database tunes the undo retention period based on 85% of the tablespace size, or on the warning alert threshold percentage for space used, whichever is lower. (The warning alert threshold defaults to 85%, but can be changed.) Therefore, if you set the warning alert threshold of the undo tablespace below 85%, this may reduce the tuned size of the undo retention period. For more information on tablespace alert thresholds, see "Managing Tablespace Alerts".
You can determine the current retention period by querying the
TUNED_UNDORETENTION column of the
This view contains one row for each 10-minute statistics collection interval over the last 4 days. (Beyond 4 days, the data is available in the
TUNED_UNDORETENTION is given in seconds.
select to_char(begin_time, 'DD-MON-RR HH24:MI') begin_time, to_char(end_time, 'DD-MON-RR HH24:MI') end_time, tuned_undoretention from v$undostat order by end_time; BEGIN_TIME END_TIME TUNED_UNDORETENTION --------------- --------------- ------------------- 04-FEB-05 00:01 04-FEB-05 00:11 12100 ... 07-FEB-05 23:21 07-FEB-05 23:31 86700 07-FEB-05 23:31 07-FEB-05 23:41 86700 07-FEB-05 23:41 07-FEB-05 23:51 86700 07-FEB-05 23:51 07-FEB-05 23:52 86700 576 rows selected.
See Oracle Database Reference for more information about
You specify the minimum undo retention period (in seconds) by setting the
UNDO_RETENTION initialization parameter.
As described in "About the Undo Retention Period", the current undo retention period may be automatically tuned to be greater than
UNDO_RETENTION, or, unless retention guarantee is enabled, less than
UNDO_RETENTION if space in the undo tablespace is low.
To set the minimum undo retention period:
Do one of the following:
UNDO_RETENTION in the initialization parameter file.
UNDO_RETENTION = 1800
UNDO_RETENTION at any time using the
ALTER SYSTEM statement:
ALTER SYSTEM SET UNDO_RETENTION = 2400;
The effect of an
UNDO_RETENTION parameter change is immediate, but it can only be honored if the current undo tablespace has enough space.
Automatic tuning of undo retention typically achieves better results with a fixed-size undo tablespace. If you decide to use a fixed-size undo tablespace, then the Undo Advisor can help you estimate needed capacity.
You can access the Undo Advisor through Oracle Enterprise Manager Database Express (EM Express) or through the
DBMS_ADVISOR PL/SQL package. EM Express is the preferred method of accessing the advisor. For more information on using the Undo Advisor through EM Express, see Oracle Database 2 Day DBA.
The Undo Advisor relies for its analysis on data collected in the Automatic Workload Repository (AWR). It is therefore important that the AWR have adequate workload statistics available so that the Undo Advisor can make accurate recommendations. For newly created databases, adequate statistics may not be available immediately. In such cases, continue to use the default auto-extending undo tablespace until at least one workload cycle completes.
An adjustment to the collection interval and retention period for AWR statistics can affect the precision and the type of recommendations that the advisor produces. See Oracle Database Performance Tuning Guide for more information.
To use the Undo Advisor, you first estimate these two values:
The length of your expected longest running query
After the database has completed a workload cycle, you can view the Longest Running Query field on the System Activity subpage of the Automatic Undo Management page.
The longest interval that you will require for Oracle Flashback operations
For example, if you expect to run Oracle Flashback queries for up to 48 hours in the past, your Oracle Flashback requirement is 48 hours.
You then take the maximum of these two values and use that value as input to the Undo Advisor.
Running the Undo Advisor does not alter the size of the undo tablespace. The advisor just returns a recommendation. You must use
DATABASE statements to change the tablespace data files to fixed sizes.
The following example assumes that the undo tablespace has one auto-extending data file named
undotbs.dbf. The example changes the tablespace to a fixed size of 300MB.
ALTER DATABASE DATAFILE '/oracle/dbs/undotbs.dbf' RESIZE 300M; ALTER DATABASE DATAFILE '/oracle/dbs/undotbs.dbf' AUTOEXTEND OFF;
To make the undo tablespace fixed-size, Oracle suggests that you first allow enough time after database creation to run a full workload, thus allowing the undo tablespace to grow to its minimum required size to handle the workload. Then, you can use the Undo Advisor to determine, if desired, how much larger to set the size of the undo tablespace to allow for long-running queries and Oracle Flashback operations.
Oracle Database 2 Day DBA for instructions for computing the minimum undo tablespace size with the Undo Advisor
You can activate the Undo Advisor by creating an undo advisor task through the advisor framework.
The following example creates an undo advisor task to evaluate the undo tablespace. The name of the advisor is 'Undo Advisor'. The analysis is based on Automatic Workload Repository snapshots, which you must specify by setting parameters
END_SNAPSHOT. In the following example, the
START_SNAPSHOT is "1" and
END_SNAPSHOT is "2".
DECLARE tid NUMBER; tname VARCHAR2(30); oid NUMBER; BEGIN DBMS_ADVISOR.CREATE_TASK('Undo Advisor', tid, tname, 'Undo Advisor Task'); DBMS_ADVISOR.CREATE_OBJECT(tname, 'UNDO_TBS', null, null, null, 'null', oid); DBMS_ADVISOR.SET_TASK_PARAMETER(tname, 'TARGET_OBJECTS', oid); DBMS_ADVISOR.SET_TASK_PARAMETER(tname, 'START_SNAPSHOT', 1); DBMS_ADVISOR.SET_TASK_PARAMETER(tname, 'END_SNAPSHOT', 2); DBMS_ADVISOR.SET_TASK_PARAMETER(tname, 'INSTANCE', 1); DBMS_ADVISOR.execute_task(tname); END; /
After you have created the advisor task, you can view the output and recommendations in the Automatic Database Diagnostic Monitor in EM Express. This information is also available in the
DBA_ADVISOR_* data dictionary views (
DBA_ADVISOR_RECOMMENDATIONS, and so on).
You manage undo tablespaces by completing tasks such as creating, altering, and dropping them. You can also switch undo tablespaces and establish user quotas for undo space.
Although Database Configuration Assistant (DBCA) automatically creates an undo tablespace for new installations, there may be occasions when you want to manually create an undo tablespace.
When you are creating a database, you can create an undo tablespace with the
CREATE DATABASE statement. In an existing database, you can create an undo tablespace with the
CREATE UNDO TABLESPACE statement.
There are two methods of creating an undo tablespace. The first method creates the undo tablespace when the
CREATE DATABASE statement is issued. This occurs when you are creating a new database, and the instance is started in automatic undo management mode (
UNDO_MANAGEMENT = AUTO). The second method is used with an existing database. It uses the
CREATE UNDO TABLESPACE statement.
You cannot create database objects in an undo tablespace. It is reserved for system-managed undo data.
Oracle Database enables you to create a single-file undo tablespace. Single-file, or bigfile, tablespaces are discussed in "Bigfile Tablespaces".
You can create a specific undo tablespace using the
UNDO TABLESPACE clause of the
CREATE DATABASE statement.
The following statement illustrates using the
UNDO TABLESPACE clause in a
CREATE DATABASE statement. The undo tablespace is named
undotbs_01 and one data file,
/u01/oracle/rbdb1/undo0101.dbf, is allocated for it.
CREATE DATABASE rbdb1 CONTROLFILE REUSE . . . UNDO TABLESPACE undotbs_01 DATAFILE '/u01/oracle/rbdb1/undo0101.dbf';
If the undo tablespace cannot be created successfully during
CREATE DATABASE, the entire
CREATE DATABASE operation fails. You must clean up the database files, correct the error and retry the
CREATE DATABASE operation.
CREATE DATABASE statement also lets you create a single-file undo tablespace at database creation. This is discussed in "Supporting Bigfile Tablespaces During Database Creation".
Oracle Database SQL Language Reference for the syntax for using the
CREATE DATABASE statement to create an undo tablespace
CREATE UNDO TABLESPACE statement is the same as the
CREATE TABLESPACE statement, but the
UNDO keyword is specified. The database determines most of the attributes of the undo tablespace, but you can specify the
This example creates the
undotbs_02 undo tablespace with the
CREATE UNDO TABLESPACE undotbs_02 DATAFILE '/u01/oracle/rbdb1/undo0201.dbf' SIZE 2M REUSE AUTOEXTEND ON;
You can create multiple undo tablespaces, but only one of them can be active at any one time.
Oracle Database SQL Language Reference for the syntax for using the
CREATE UNDO TABLESPACE statement to create an undo tablespace
You can alter an undo tablespaces using the
ALTER TABLESPACE statement.
However, since most aspects of undo tablespaces are system managed, you need only be concerned with the following actions:
Adding a data file
Renaming a data file
Bringing a data file online or taking it offline
Beginning or ending an open backup on a data file
Enabling and disabling undo retention guarantee
These are also the only attributes you are permitted to alter.
If an undo tablespace runs out of space, or you want to prevent it from doing so, you can add more files to it or resize existing data files.
The following example adds another data file to undo tablespace undotbs_01:
ALTER TABLESPACE undotbs_01 ADD DATAFILE '/u01/oracle/rbdb1/undo0102.dbf' AUTOEXTEND ON NEXT 1M MAXSIZE UNLIMITED;
You can use the
ALTER DATABASE...DATAFILE statement to resize or extend a data file.
DROP TABLESPACE statement to drop an undo tablespace.
The following example drops the undo tablespace
DROP TABLESPACE undotbs_01;
An undo tablespace can only be dropped if it is not currently used by any instance. If the undo tablespace contains any outstanding transactions (for example, a transaction died but has not yet been recovered), the
DROP TABLESPACE statement fails. However, since
DROP TABLESPACE drops an undo tablespace even if it contains unexpired undo information (within retention period), you must be careful not to drop an undo tablespace if undo information is needed by some existing queries.
DROP TABLESPACE for undo tablespaces behaves like
DROP TABLESPACE...INCLUDING CONTENTS. All contents of the undo tablespace are removed.
Oracle Database SQL Language Reference for
DROP TABLESPACE syntax
You can switch from using one undo tablespace to another. Because the
UNDO_TABLESPACE initialization parameter is a dynamic parameter, the
ALTER SYSTEM SET statement can be used to assign a new undo tablespace.
The following statement switches to a new undo tablespace:
ALTER SYSTEM SET UNDO_TABLESPACE = undotbs_02;
undotbs_01 is the current undo tablespace, after this command successfully executes, the instance uses
undotbs_02 in place of
undotbs_01 as its undo tablespace.
If any of the following conditions exist for the tablespace being switched to, an error is reported and no switching occurs:
The tablespace does not exist
The tablespace is not an undo tablespace
The tablespace is already being used by another instance (in an Oracle RAC environment only)
The database is online while the switch operation is performed, and user transactions can be executed while this command is being executed. When the switch operation completes successfully, all transactions started after the switch operation began are assigned to transaction tables in the new undo tablespace.
The switch operation does not wait for transactions in the old undo tablespace to commit. If there are any pending transactions in the old undo tablespace, the old undo tablespace enters into a
PENDING OFFLINE mode (status). In this mode, existing transactions can continue to execute, but undo records for new user transactions cannot be stored in this undo tablespace.
An undo tablespace can exist in this
PENDING OFFLINE mode, even after the switch operation completes successfully. A
PENDING OFFLINE undo tablespace cannot be used by another instance, nor can it be dropped. Eventually, after all active transactions have committed, the undo tablespace automatically goes from the
PENDING OFFLINE mode to the
OFFLINE mode. From then on, the undo tablespace is available for other instances (in an Oracle Real Application Cluster environment).
If the parameter value for
UNDO TABLESPACE is set to '' (two single quotes), then the current undo tablespace is switched out and the next available undo tablespace is switched in. Use this statement with care because there may be no undo tablespace available.
The following example unassigns the current undo tablespace:
ALTER SYSTEM SET UNDO_TABLESPACE = '';
You can use the Oracle Database Resource Manager to establish user quotas for undo space. The Database Resource Manager directive
UNDO_POOL allows DBAs to limit the amount of undo space consumed by a group of users (resource consumer group).
You can specify an undo pool for each consumer group. An undo pool controls the amount of total undo that can be generated by a consumer group. When the total undo generated by a consumer group exceeds its undo limit, the current
UPDATE transaction generating the undo is terminated. No other members of the consumer group can perform further updates until undo space is freed from the pool.
UNDO_POOL directive is explicitly defined, users are allowed unlimited undo space.
Oracle Database provides proactive help in managing tablespace disk space use by alerting you when tablespaces run low on available space.
See "Managing Tablespace Alerts" for information on how to set alert thresholds for the undo tablespace.
In addition to the proactive undo space alerts, Oracle Database also provides alerts if your system has long-running queries that cause
OLD errors. To prevent excessive alerts, the long query alert is issued at most once every 24 hours. When the alert is generated, you can check the Undo Advisor Page of EM Express to get more information about the undo tablespace. For more information on using the Undo Advisor through EM Express, see Oracle Database 2 Day DBA.
If you are currently using rollback segments to manage undo space, Oracle strongly recommends that you migrate your database to automatic undo management.
For instructions, see Oracle Database Upgrade Guide.
By default, undo records for temporary tables are stored in the undo tablespace and are logged in the redo, which is the same way undo is managed for persistent tables. However, you can use the
TEMP_UNDO_ENABLED initialization parameter to separate undo for temporary tables from undo for persistent tables. When this parameter is set to
TRUE, the undo for temporary tables is called temporary undo.
Temporary undo records are stored in the database's temporary tablespaces and thus are not logged in the redo log. When temporary undo is enabled, some of the segments used by the temporary tablespaces store the temporary undo, and these segments are called temporary undo segments.
When temporary undo is enabled, it might be necessary to increase the size of the temporary tablespaces to account for the undo records.
Enabling temporary undo provides the following benefits:
Temporary undo reduces the amount of undo stored in the undo tablespaces.
Less undo in the undo tablespaces can result in more realistic undo retention period requirements for undo records.
Temporary undo reduces the size of the redo log.
Performance is improved because less data is written to the redo log, and components that parse redo log records, such as LogMiner, perform better because there is less redo data to parse.
Temporary undo enables data manipulation language (DML) operations on temporary tables in a physical standby database with the Oracle Active Data Guard option. However, data definition language (DDL) operations that create temporary tables must be issued on the primary database.
You can enable temporary undo for a specific session or for the whole system. When you enable temporary undo for a session using an
SESSION statement, the session creates temporary undo without affecting other sessions. When you enable temporary undo for the system using an
SYSTEM statement, all existing sessions and new sessions create temporary undo.
When a session uses temporary objects for the first time, the current value of the
TEMP_UNDO_ENABLED initialization parameter is set for the rest of the session. Therefore, if temporary undo is enabled for a session and the session uses temporary objects, then temporary undo cannot be disabled for the session. Similarly, if temporary undo is disabled for a session and the session uses temporary objects, then temporary undo cannot be enabled for the session.
Temporary undo is enabled by default for a physical standby database with the Oracle Active Data Guard option. The
TEMP_UNDO_ENABLED initialization parameter has no effect on a physical standby database with Active Data Guard option because of the default setting.
Temporary undo can be enabled only if the compatibility level of the database is 12.0.0 or higher.
You can enable or disable temporary undo for a session or for the system. To do so, set the
TEMP_UNDO_ENABLED initialization parameter.
To enable or disable temporary undo:
In SQL*Plus, connect to the database.
If you are enabling or disabling temporary undo for a session, then start the session in SQL*Plus.
If you are enabling or disabling temporary undo for the system, then connect as an administrative user with the
SYSTEM system privilege in SQL*Plus.
TEMP_UNDO_ENABLED initialization parameter:
To enable temporary undo for a session, run the following SQL statement:
ALTER SESSION SET TEMP_UNDO_ENABLED = TRUE;
To disable temporary undo for a session, run the following SQL statement:
ALTER SESSION SET TEMP_UNDO_ENABLED = FALSE;
To enable temporary undo for the system, run the following SQL statement:
ALTER SYSTEM SET TEMP_UNDO_ENABLED = TRUE;
After temporary undo is enabled for the system, a session can disable temporary undo using the
To disable temporary undo for the system, run the following SQL statement:
ALTER SYSTEM SET TEMP_UNDO_ENABLED = FALSE;
After temporary undo is disabled for the system, a session can enable temporary undo using the
You can also enable temporary undo for the system by setting
TRUE in a server parameter file or a text initialization parameter file. In this case, all new sessions create temporary undo unless temporary undo is disabled for the system by an
SYSTEM statement or for a session by an
You can query a set of views for information about undo space in the automatic undo management mode.
In addition to views listed here, you can obtain information from the views available for viewing tablespace and data file information. See "Data Files Data Dictionary Views" for information on getting information about those views.
The following dynamic performance views are useful for obtaining space information about the undo tablespace:
Contains statistics for monitoring and tuning undo space. Use this view to help estimate the amount of undo space required for the current workload. The database also uses this information to help tune undo usage in the system. This view is meaningful only in automatic undo management mode.
Contains statistics for monitoring and tuning temporary undo space. Use this view to help estimate the amount of temporary undo space required in the temporary tablespaces for the current workload. The database also uses this information to help tune temporary undo usage in the system. This view is meaningful only when temporary undo is enabled.
For automatic undo management mode, information reflects behavior of the undo segments in the undo tablespace
Contains undo segment information
Shows the status and size of each extent in the undo tablespace.
Contains statistical snapshots of
V$UNDOSTAT view is useful for monitoring the effects of transaction execution on undo space in the current instance. Statistics are available for undo space consumption, transaction concurrency, the tuning of undo retention, and the length and SQL ID of long-running queries in the instance.
Each row in the view contains statistics collected in the instance for a ten-minute interval. The rows are in descending order by the
BEGIN_TIME column value. Each row belongs to the time interval marked by (
END_TIME). Each column represents the data collected for the particular statistic in that time interval. The first row of the view contains statistics for the (partial) current time period. The view contains a total of 576 rows, spanning a 4 day cycle.
The following example shows the results of a query on the
SELECT TO_CHAR(BEGIN_TIME, 'MM/DD/YYYY HH24:MI:SS') BEGIN_TIME, TO_CHAR(END_TIME, 'MM/DD/YYYY HH24:MI:SS') END_TIME, UNDOTSN, UNDOBLKS, TXNCOUNT, MAXCONCURRENCY AS "MAXCON" FROM v$UNDOSTAT WHERE rownum <= 144; BEGIN_TIME END_TIME UNDOTSN UNDOBLKS TXNCOUNT MAXCON ------------------- ------------------- ---------- ---------- ---------- ---------- 10/28/2004 14:25:12 10/28/2004 14:32:17 8 74 12071108 3 10/28/2004 14:15:12 10/28/2004 14:25:12 8 49 12070698 2 10/28/2004 14:05:12 10/28/2004 14:15:12 8 125 12070220 1 10/28/2004 13:55:12 10/28/2004 14:05:12 8 99 12066511 3 ... 10/27/2004 14:45:12 10/27/2004 14:55:12 8 15 11831676 1 10/27/2004 14:35:12 10/27/2004 14:45:12 8 154 11831165 2 144 rows selected.
The preceding example shows how undo space is consumed in the system for the previous 24 hours from the time 14:35:12 on 10/27/2004.