cluvfy stage [-pre | -post] cfs

Use the cluvfy stage -pre cfs stage verification command to verify your cluster nodes are set up correctly before setting up OCFS2.

Use the cluvfy stage -post cfs stage verification command to perform the appropriate checks on the specified nodes after setting up OCFS2.

See Also:

Oracle Grid Infrastructure Installation Guide for your platform for a list of supported shared storage types

Syntax

cluvfy stage -pre cfs -n node_list -s storageID_list [-verbose]

cluvfy stage -post cfs -n node_list -f file_system [-verbose]

Parameters

Table A-27 cluvfy stage [-pre | -post] cfs Command Parameters

Parameter Description 
-n node_list

The comma-delimited list of nondomain qualified node names on which to conduct the verification.

 
-s storageID_list

The comma-delimited list of storage locations to check.

 
-verbose

CVU prints detailed output.

Example

To check that a shared device is configured correctly before setting up OCFS2, use a command similar to the following, where you replace /dev/sdd5 with the name of the shared device on your system:

cluvfy stage -pre cfs -n node1,node2,node3,node4 -s /dev/sdd5