Index

A  B  C  D  E  F  H  I  L  M  N  O  P  Q  R  S  T  U  V  W  

A

  • ADD DATABASE command 1
  • ADD FAR_SYNC command 1
  • Add Standby Database wizard
    • creating a broker configuration 1
    • definition 1
    • introduction 1
  • altering
    • properties
      • database 1
    • states
      • database 1 , 2
  • AlternateLocation property
    • setting log apply services 1
  • application continuity
    • support in Oracle Data Guard broker 1
  • application integration 1
  • apply instance
    • failover 1
    • PreferredApplyInstance property 1
    • selecting 1
  • ApplyInstanceTimeout property 1
  • ApplyLagThreshold property 1
  • ApplyParallel property 1
  • architecture
    • Data Guard broker 1
  • ARCHIVE_LAG_TARGET initialization parameter
    • setting in a broker configuration 1
  • archived redo logs
    • destination and configuration parameters 1
    • in a Data Guard configuration 1
    • primary database setup 1
  • ArchiveLagTarget property 1
  • ASYNC redo transport service 1
  • Automatic Storage Management (ASM)
    • creating a standby database that uses 1

B

  • background processes
    • DMON 1
  • banners
    • suppressing from DGMGRL command-line interface output 1
  • before you perform a switchover 1
  • before you use DGMGRL 1
  • benefits
    • Data Guard broker 1
    • high availability 1
    • scalability 1
    • with Oracle Real Application Clusters 1
  • Binding property 1
  • broker
    • components 1
    • configuration 1
    • Data Guard configuration file 1
    • drc* log files 1
    • installation 1
    • introduction 1
    • user interfaces 1
  • broker configurations
    • benefits 1
    • changing roles 1
    • creating 1
    • Data Guard configuration file 1
    • disabling databases 1 , 2
    • effects of removing metadata from 1
    • enabling 1 , 2
    • enabling databases 1 , 2 , 3 , 4
    • enabling fast-start failover 1
    • health 1 , 2
    • life cycle 1
    • management 1 , 2 , 3
    • monitoring 1
    • Oracle Net Services configuration 1 , 2
    • properties 1
    • protection modes 1
    • setting protection mode 1
    • status modes 1
    • supported 1
  • BystandersFollowRoleChange property 1
  • bystander standby databases
    • reintegrating into configuration 1

C

  • CDBs
    • Data Guard broker support 1
  • CFS
    • See: cluster file system
  • changing
    • properties
      • databases in a broker configuration 1 , 2
    • roles
      • within the broker configuration 1
    • states
      • databases in a broker configuration 1
      • of databases in a broker configuration 1
  • cluster file system (CFS)
    • broker configuration files 1
  • command-line interface
    • See: Data Guard command-line interface (DGMGRL)
  • command prompts
    • suppressing from DGMGRL command-line interface output 1
  • CommunicationTimeout property 1
  • complete failover 1 , 2
  • components
    • broker 1
    • Data Guard configuration 1
  • configurable properties
    • AlternateLocation 1
    • ApplyInstanceTimeout 1
    • ApplyLagThreshold 1
    • ApplyParallel 1
    • ArchiveLagTarget 1
    • Binding 1
    • database 1 , 3
    • DbFileNameConvert 1
    • DelayMins 1
    • DGConnectIdentifier 1
    • FastStartFailoverTarget 1
    • LogArchiveFormat 1
    • LogArchiveMaxProcesses 1
    • LogArchiveMinSucceedDest 1
    • LogArchiveTrace 1
    • LogFileNameConvert 1
    • LogShipping 1
    • LogXptMode 1
    • LsbyMaxEventsRecorded 1
    • LsbyMaxServers 1
    • LsbyMaxSga 1
    • LsbyPreserveCommitOrder 1
    • LsbyRecordAppliedDdl 1
    • LsbyRecordSkipDdl 1
    • LsbyRecordSkipErrors 1
    • managing redo transport services 1
    • MaxConnections 1
    • MaxFailure 1
    • NetTimeout 1
    • ObserverConnectIdentifier 1
    • PreferredApplyInstance 1
    • RedoCompression 1
    • RedoRoutes 1
    • ReopenSecs 1
    • SidName 1
    • StandbyArchiveLocation 1
    • StandbyFileManagement 1
    • StaticConnectIdentifier 1
    • TransportDisconnectedThreshold 1
    • TransportLagThreshold 1
  • configuration files
    • fast-start failover configuration (fsfo.dat) file 1
    • See Also Data Guard configuration file 1
  • configuration properties
    • BystandersFollowRoleChange 1
    • CommunicationTimeout 1
    • FastStartFailoverAutoReinstate 1
    • FastStartFailoverLagLimit 1
    • FastStartFailoverPmyShutdown 1
    • FastStartFailoverThreshold 1
    • ObserverOverride 1
    • ObserverReconnect 1
    • OperationTimeout 1
    • PrimaryLostWriteAction 1
    • Tracelevel 1
  • connecting
    • privileges required for Data Guard broker configurations 1
    • starting the observer 1
  • controlling
    • available SGA memory 1
  • CONVERT DATABASE command 1
  • CREATE CONFIGURATION command 1
  • creating
    • a broker configuration
      • with the Add Standby Database wizard 1
    • a standby database 1

D

  • database resources
    • monitoring 1
  • databases
    • changing the state of 1
    • creating and adding to a broker configuration 1
    • dependencies 1
    • disabling management of 1
    • during
      • fast-start failover 1
      • manual failover 1
      • switchover 1
    • enabling 1
    • health 1
    • installation for broker management 1
    • monitorable properties 1
    • network setup 1 , 2
    • prerequisites for broker configurations 1
    • properties 1 , 2 , 3
    • property management 1
    • reenabling after a role transition 1
    • restarting
      • after fast-start failover 1
    • shutting down
      • effect on fast-start failover 1 , 2
    • states
      • dependencies 1
      • transitions 1
    • status 1
  • Data Guard
    • troubleshooting 1
  • Data Guard broker
    • See Also broker 1
  • Data Guard command-line interface
    • commands
      • ENABLE FAST_START FAILOVER 1
      • SET STATE 1
    • DG_BROKER_START initialization parameter 1
    • enabling a database 1
    • introduction 1
  • Data Guard command-line interface (DGMGRL)
    • banners from output 1
    • commands
      • ADD DATABASE 1
      • ADD FAR_SYNC 1
      • CONVERT DATABASE 1
      • CREATE CONFIGURATION 1
      • DISABLE CONFIGURATION 1
      • DISABLE DATABASE 1
      • DISABLE FAR_SYNC 1 , 2
      • DISABLE FAST_START FAILOVER 1
      • DISABLE FAST_START FAILOVER CONDITION 1
      • EDIT CONFIGURATION (property) 1
      • EDIT CONFIGURATION (protection mode) 1
      • EDIT CONFIGURATION (RENAME) 1 , 2
      • EDIT CONFIGURATION RESET (Property) 1 , 2
      • EDIT DATABASE (Property) 1 , 2
      • EDIT DATABASE (rename) 1
      • EDIT DATABASE (state) 1
      • EDIT DATABASE RESET (Property) 1
      • EDIT FAR_SYNC 1
      • EDIT FAR_SYNC RESET (Property) 1
      • EDIT INSTANCE (AUTO PFILE) 1
      • EDIT INSTANCE (property) 1 , 2
      • EDIT INSTANCE RESET (Property) 1
      • ENABLE CONFIGURATION 1
      • ENABLE DATABASE 1
      • ENABLE FAR_SYNC 1
      • ENABLE FAST_START FAILOVER 1
      • ENABLE FAST_START FAILOVER CONDITION 1
      • EXIT 1
      • FAILOVER 1
      • HELP 1
      • QUIT 1
      • REINSTATE DATABASE 1
      • REMOVE CONFIGURATION 1
      • REMOVE DATABASE 1
      • REMOVE FAR_SYNC 1
      • REMOVE INSTANCE 1
      • SHOW CONFIGURATION 1 , 2
      • SHOW DATABASE 1
      • SHOW FAR_SYNC 1
      • SHOW FAST_START FAILOVER 1
      • SHOW INSTANCE 1
      • SHUTDOWN 1
      • SQL 1
      • START OBSERVER 1
      • STARTUP 1
      • STOP OBSERVER 1
      • SWITCHOVER 1 , 2
      • VALIDATE DATABASE 1
      • VALIDATE FAR_SYNC 1
    • creating a configuration 1
    • DG_BROKER_START initialization parameter 1
    • enabling the configuration 1
    • monitoring broker configurations 1
    • performing routine management tasks 1
    • prerequisites 1
    • setting critical database properties 1
    • setting up standby redo log files 1
    • single command mode 1
    • starting 1
    • stopping 1
    • string values 1
    • summary of commands 1
    • suppressing command prompts 1
  • Data Guard configuration file
    • for an Oracle RAC database 1
    • in a CFS area 1
    • inconsistent values from server parameter file 1
    • relationship to DMON process 1
    • setting up 1
  • Data Guard configurations
    • automated creation of 1
    • background 1
  • Data Guard monitor (DMON)
    • interaction with the Oracle database 1
    • managing objects 1 , 2 , 3
    • Oracle database background processes 1
    • overview 1
    • two-way network communication 1
  • data protection modes
    • See: protection modes
  • DBA_LOGSTDBY_EVENTS table
    • managing 1
  • DbFileNameConvert property 1
  • DBMS_DG package
    • using to direct fast-start failover 1
  • delaying
    • application of redo data with DelayMins property 1
  • DelayMins property 1
  • destinations
    • archived redo log file parameters 1
    • viewing the LogXptStatus property 1
  • DG_BROKER_CONFIG_FILEn file
    • in a CFS area 1
  • DG_BROKER_START initialization parameter 1 , 2 , 3
  • DGConnectIdentifier property 1
  • DGMGRL
    • reinstating a database 1
  • diagnostic information
    • sources 1
  • DISABLE CONFIGURATION command
    • example 1
  • DISABLE DATABASE command
    • example 1
  • DISABLE FAR_SYNC command 1 , 2
  • DISABLE FAST_START FAILOVER command 1
  • DISABLE FAST_START FAILOVER CONDITION command 1
  • disabling
    • broker configuration 1 , 2
    • broker management of standby database 1
    • databases 1 , 2
    • fast-start failover
      • on a standby database 1
  • disaster protection
    • benefits 1
  • displaying
    • configuration information 1
    • help for DGMGRL commands 1
  • distributed management framework 1
  • DMON
    • See: Data Guard monitor (DMON)
  • downgrading
    • Data Guard 1
    • Oracle Enterprise Manager 1
    • protection mode 1
  • drc* log files
    • broker diagnostic information 1
    • during reinstatement 1
    • recording failed reinstatement 1

E

  • EDIT CONFIGURATION (Property) command 1
  • EDIT CONFIGURATION (protection mode) command 1
  • EDIT CONFIGURATION (RENAME) command 1 , 2
  • EDIT CONFIGURATION RESET (Property) command 1 , 2
  • EDIT DATABASE (property) command
    • example 1
  • EDIT DATABASE (Property) command 1 , 2
  • EDIT DATABASE (rename) command 1
  • EDIT DATABASE (state) command
    • example 1
  • EDIT DATABASE RESET (Property) command 1
  • EDIT FAR_SYNC command 1
  • EDIT FAR_SYNC RESET (Property) command 1
  • editing
    • configurable properties 1
    • database instance 1 , 2 , 3
    • database name 1
    • database state 1
    • protection modes 1
  • EDIT INSTANCE (AUTO PFILE) command 1
  • EDIT INSTANCE (property) command 1 , 2
  • EDIT INSTANCE RESET (Property) command 1
  • effect of switchovers on 1
  • e-mail
    • reporting events 1
  • ENABLE CONFIGURATION command 1 , 2
  • ENABLE DATABASE command 1
  • ENABLE FAR_SYNC command 1
  • ENABLE FAST_START FAILOVER command 1
  • ENABLE FAST_START FAILOVER CONDITION command 1
  • enabling
    • broker configuration 1 , 2
    • databases in a broker configuration 1
    • fast-start failover 1
  • Enterprise Edition database
    • installation 1
  • Enterprise Manager
    • Fast-Start Failover wizard
      • disabling fast-start failover 1
    • wizards
      • automate standby database creation 1
  • error messages
    • ORA-16795 1
  • error status 1
  • events
    • managing
      • in a logical standby database 1
    • monitoring with Oracle Enterprise Manager 1
    • Oracle Enterprise Manager 1
    • reporting 1
    • responding to 1
  • EXIT command 1 , 2
    • See also: QUIT command

F

  • failover
    • failing over to a standby database 1
    • Oracle Enterprise Manager 1
  • FAILOVER command 1 , 2
  • failovers
    • benefits 1
    • broker tasks 1
    • choosing a target standby database 1
    • complete 1
    • fast-start failover
      • effect on data protection mode 1
    • immediate 1
    • managing
      • fast-start 1
      • manual 1
    • manual
      • complete option 1
      • effect on data protection mode 1
      • immediate option 1
    • reenabling disabled databases after 1
    • starting manually 1
    • using DGMGRL 1
  • failures
    • observer 1
  • far sync instances
    • managing 1
  • fast-start failover
    • configuration information in the fsfo.dat file 1
    • defined 1
    • DGMGRL client as the observer 1
    • directed from an application 1
    • disabling
      • to perform manual failover 1
    • enabling 1
    • instance failures 1
    • monitoring by the observer 1
    • observer overview 1
    • performing manual failovers when enabled 1
    • performing switchover when enabled 1
    • querying V$DATABASE 1
    • reinstating the former primary database 1
    • requirements 1
    • restarting databases after shut down 1
    • setting the FastStartFailoverThreshold property 1
    • shutdown abort 1 , 2
    • to Oracle RAC database instances 1
    • unobserved 1
    • viewing failover configuration statistics 1
  • FastStartFailoverAutoReinstate property 1
  • FastStartFailoverLagLimit property 1
  • FastStartFailoverPmyShutdown property 1
  • FastStartFailoverTarget property 1
  • FastStartFailoverThreshold property
    • setting 1
  • FASTSYNC redo transport mode 1
  • FASTSYNC redo transport service 1
  • files
    • naming the server parameter file 1
  • Flashback Database
    • reinstating databases 1
    • use after failover 1
  • flashback logs
    • reinstating a failed primary database 1
  • FORCE option
    • performing a manual failover 1
  • FS_FAILOVER_OBSERVER_HOST column
    • of V$DATABASE view 1
  • FS_FAILOVER_OBSERVER_PRESENT column
    • of V$DATABASE view 1
  • FS_FAILOVER_STATUS column
    • of V$DATABASE view
      • failed reinstatement 1
  • FSFO.DAT file
    • overview 1

H

  • health check
    • monitoring 1
    • on primary database 1
    • on standby database 1
    • revealed by configuration status 1
  • HELP command 1
  • high availability
    • benefits 1
    • levels of data protection 1 , 2
    • LogXptMode property 1
    • restoring after fast-start failover 1

I

  • immediate failover 1 , 2
  • InconsistenLogXptProps property 1
  • InconsistentProperties property 1
  • increased scalability
    • benefits 1
  • initialization parameters
    • database configurable properties 1
    • DG_BROKER_CONFIG_FILEn 1
    • DG_BROKER_START 1 , 2
    • dynamic 1
    • static 1
  • installation
    • ARCHIVELOG mode setup 1
    • Data Guard 1
    • Oracle Enterprise Manager 1
    • Oracle Instant Client 1 , 2
    • prerequisites 1
  • instances
    • failures 1
    • removing 1 , 2
    • shutting down 1
    • starting 1
  • intended state
    • configuration health check 1

L

  • life cycle of a broker configuration 1
  • LOG_ARCHIVE_MIN_SUCCEED initialization parameter 1
  • log apply services
    • and apply instance failover 1
    • and parallel apply 1
    • apply instance 1
    • configuring 1
    • Data Guard configuration 1
    • delayed application of redo data 1
    • delaying 1
    • in an Oracle RAC database 1
    • managing 1
    • selecting the apply instance 1
    • verifying 1
  • LogArchiveFormat property 1
  • LogArchiveMaxProcesses property 1
  • LogArchiveMinSucceedDest property 1
  • LogArchiveTrace property 1
  • LogFileNameConvert property 1
  • log files
    • broker 1
  • logical standby databases
    • managing events 1
    • SQL Apply 1
    • state transitions 1
    • switchover to the primary role 1
  • LogShipping property 1
  • LogXptMode property 1
  • LogXptStatus property 1
  • LsbyFailedTxnInfo property 1
  • LsbyMaxEventsRecorded property 1
  • LsbyMaxServers property 1
  • LsbyMaxSga property 1
  • LsbyParameters property 1
  • LsbyPreserveCommitOrder property 1
  • LsbyRecordAppliedDdl property 1
  • LsbyRecordSkipDdl property 1
  • LsbyRecordSkipErrors property 1

M

  • management
    • benefits 1
    • Oracle Enterprise Manager 1
  • managing
    • a broker configuration 1 , 2
    • databases 1
    • DBA_LOGSTDBY_EVENTS table 1
    • events
      • in a logical standby database 1
    • fast-start failover 1
    • local operations 1
    • log apply services 1
    • manual failover 1
    • parallel apply in a physical standby database 1
    • remote operations 1
    • roles
      • fast-start failover 1
      • manual failover 1
      • switchover 1
    • switchover 1
  • manual failover
    • complete option 1
    • effect on protection modes 1
    • immediate option 1
    • performing when fast-start failover is enabled 1 , 2
    • starting 1
  • manual role changes
    • performing when fast-start failover is enabled 1
  • MaxConnections property 1
  • MaxFailure property 1
  • maximize availability 1 , 2 , 3
  • maximize data protection 1 , 2 , 3
  • maximize performance 1 , 2 , 3
  • maximum availability
    • data protection mode 1
  • maximum performance
    • data protection mode 1
  • maximum protection
    • data protection mode 1
  • monitorable properties
    • InconsistentLogXptProps 1
    • InconsistentProperties 1
    • LogXptStatus 1
    • LsbyFailedTxnInfo 1
    • LsbyParameters 1
    • RecvQEntries 1
    • SendQEntries 1
    • TopWaitEvents 1
  • monitoring
    • broker configurations 1 , 2 , 3
    • local and remote databases 1
    • Oracle Enterprise Manager performance page 1
    • through the command-line interface 1
  • multitenant container databases
    • See CDBs 1

N

  • NetTimeout property 1
  • networks
    • Data Guard configuration 1
    • setting up files 1
    • two-way communication 1
  • normal status 1

O

  • objects
    • broker configuration 1
    • disabling 1
    • properties for databases 1
  • observer
    • and FastStartFailoverThreshold property 1
    • connecting to the configuration 1
    • connection to the local computer 1
    • detecting
      • database shutdown 1 , 2
      • instance failures 1
    • failures 1
    • finding host machine name 1
    • installing Oracle Instant Client kit 1 , 2
    • lost connection 1
    • maintaining fast-start failover configuration information 1
    • monitoring 1
    • shutting down 1
    • using Oracle Wallet for connection credentials 1
  • ObserverConnectIdentifier property 1
  • ObserverOverride property 1
  • ObserverReconnect property 1
  • operations
    • complete failover 1
    • disable broker management
      • effect on protection modes 1
    • downgrade
      • effect on protection modes 1
    • effect on protection modes 1
    • enable broker management
      • effect on protection modes 1
    • failover 1
    • immediate failover 1
    • manual failover
      • effect on protection modes 1
    • removing a database from the configuration
      • effect on protection modes 1
  • OperationTimeout property 1
  • ORA-16661 message
    • reinstating a database 1 , 3
  • ORA-16795 message
    • re-creating a database 1
  • Oracle Clusterware
    • and instances of an Oracle RAC database 1
    • integration with Data Guard broker 1
    • recover failed instances 1
  • Oracle Enterprise Manager
    • Add Standby Database wizard 1
    • database property pages 1
    • downgrading 1
    • event management system 1
    • integration 1
    • integration with the Data Guard monitor 1
    • introduction 1 , 2
    • making Oracle Net Services configuration changes 1 , 2
    • monitoring events 1
    • performance tools and graphs 1
    • upgrading 1
    • wizards
      • creating standby databases 1
  • Oracle Instant Client
    • installing 1 , 2
  • Oracle Managed Files (OMF)
    • creating a standby database that uses 1
  • Oracle Net Services
    • configuration changes 1 , 2
    • installation prerequisites 1
    • supported configuration 1
    • two-way communication 1
  • Oracle RAC One Node
    • supported by Oracle Data Guard broker 1
  • Oracle Real Application Clusters
    • and log apply services 1
    • and setting the apply instance 1
    • availability of instances with Oracle Clusterware 1
    • benefits 1
    • fast-start failover 1
    • observer behavior in 1
    • observer connection to instances 1
    • Oracle Clusterware 1
  • Oracle Universal Installer
    • installing Oracle Instant Client 1 , 2
  • Oracle Wallet
    • starting the observer 1

P

  • parallel apply
    • and log apply services 1
    • managing in a physical standby database 1
  • performance
    • Oracle Enterprise Manager tools 1
  • physical standby databases
    • managing parallel apply 1
    • state transitions 1
    • switchover to the primary role 1
  • PreferredApplyInstance property 1
  • prerequisites
    • installation 1
    • switchover 1
  • primary database
    • ARCHIVELOG mode 1
    • constructing a standby database 1 , 2
    • Data Guard configuration 1
    • during failover 1
    • during switchover 1
    • Flashback Database 1
    • health check 1
    • preparing for switchover 1
    • reinstating after a fast-start failover 1
    • state transitions 1
    • switching over to the standby role 1
  • PrimaryLostWriteAction property 1
  • processes
    • DMON 1
    • Oracle database 1
  • properties
    • configurable 1
    • database 1
    • managing 1
    • monitorable 1
    • setting
      • in server parameter file 1 , 2
  • property pages
    • database 1
  • protection modes
    • after a failover 1 , 2 , 3
    • benefits 1
    • configuration 1 , 2 , 3
    • downgrading 1
    • redo transport services setup 1
    • setting for a broker configuration 1
    • updating 1
    • upgrading 1

Q

  • QUIT command 1 , 2
    • See also: EXIT command

R

  • RecvQEntries property 1
  • Redo Apply 1 , 2
  • RedoCompression property 1
  • RedoRoutes property 1
  • redo transport services
    • ASYNC mode 1
    • configuring
      • data protection modes 1
    • Data Guard configuration 1
    • FASTSYNC mode 1 , 2
    • managing 1
    • SYNC mode 1
    • tuning 1
    • turning off 1
    • turning on 1
    • verifying 1
  • REINSTATE DATABASE command 1
  • reinstatement
    • failure logged in broker drc* log files 1
    • Flashback Database requirement 1
    • flashback logs requirement 1
    • how to 1
    • logged in broker log files 1
    • ORA-16661 message 1 , 3
    • using DGMGRL 1
    • using Enterprise Manager 1
  • REMOVE CONFIGURATION command
    • example 1
  • REMOVE DATABASE command 1
  • REMOVE FAR_SYNC command 1
  • REMOVE INSTANCE command 1
  • removing
    • a standby database 1
  • ReopenSecs property 1
  • requests
    • passing between sites 1
  • requirements
    • for enabling fast-start failover 1
  • restarting
    • databases
      • when fast-start failover is enabled 1
  • role transitions
    • changing 1
    • managing
      • fast-start failover 1
      • manual failover 1
      • switchover 1

S

  • scripts
    • using Data Guard command-line interface (DGMGRL) 1
  • selecting the apply instance 1
  • SendQEntries property 1
  • server parameter file
    • broker property management 1 , 2
    • filenames 1
    • inconsistent values from Data Guard configuration file 1
  • server-side software 1
  • SET STATE command
    • and setting the apply instance 1
  • setting
    • configuration protection mode 1
    • database properties 1
    • log apply services 1
    • redo transport services 1
  • SGA memory
    • and SQL Apply 1
  • SHOW CONFIGURATION command 1 , 2 , 3
  • SHOW DATABASE command 1
  • SHOW FAR_SYNC command 1
  • SHOW FAST_START FAILOVER command 1
  • showing
    • See: each SHOW command
  • SHOW INSTANCE command 1
  • shutdown abort
    • effect on fast-start failover 1
  • SHUTDOWN command 1
  • shutting down an Oracle instance 1
  • SidName property 1
  • single command mode
    • for Data Guard command-line interface 1
  • SQL Apply
    • and logical standby databases 1
    • effect of switchovers on 1
  • SQL command 1
  • SQL statements
    • executing from DGMGRL command line 1
  • StandbyArchiveLocation property
    • setting log apply services 1
  • standby databases
    • choosing a target standby database 1
    • constructing from backups 1 , 2
    • creating
      • if primary database uses ASM or OMF 1
    • health check 1
    • not involved in a switchover 1
    • reenabling after failover 1
    • removing 1
    • specifying the location of archived redo logs 1
    • switching over to the primary role 1
  • StandbyFileManagement property 1
  • standby redo log files
    • setting up with DGMGRL 1
  • starting
    • Data Guard command-line interface (DGMGRL) 1 , 2
    • Data Guard monitor (DMON) 1
    • manual failover 1
    • Oracle instance 1
    • switchover 1
  • START OBSERVER command
    • fast-start failover configuration file (fsfo.dat) 1
  • STARTUP command 1
  • states
    • changing 1
    • database 1
    • database transitions 1
  • state transitions
    • effect on database states 1
    • logical standby database 1
    • physical standby database 1
    • primary database 1
  • StaticConnectIdentifier property 1
  • status
    • configuration 1
    • health check on primary database 1
    • health check on standby database 1
    • health of the database 1
    • intended state of a configuration 1
  • status messages
    • ORA-16661 1
    • ORA-16795 1
  • STOP OBSERVER command 1 , 2
  • string values
    • Data Guard command-line interface 1
  • SWITCHOVER command 1 , 2
  • switchovers
    • benefits 1
    • broker tasks 1
    • choosing a target standby database 1
    • DGMGRL SWITCHOVER command 1
    • effect on
      • database startup 1
      • primary database 1
      • protection modes 1
      • standby databases not involved in the switchover 1
    • managing 1 , 2
    • overview
      • Oracle Enterprise Manager 1
    • performing when fast-start failover is enabled 1
    • preparing the primary database 1
    • prerequisites 1
    • reenabling disabled standby databases 1
    • starting 1
    • transitioning
      • a logical standby database to the primary role 1
      • a physical standby database to the primary role 1
    • using the DGMGRL SWITCHOVER command 1
  • SYNC redo transport mode 1
  • SYSDBA privileges
    • to connect to the database 1

T

  • target standby database
    • choosing 1
    • disabling fast-start failover on 1
  • TopWaitEvents property 1
  • TraceLevel property 1
  • transaction commit order
    • controlling 1
  • TransportDisconnectedThreshold property 1
  • TransportLagThreshold property 1
  • TRANSPORT-ON state
    • setting LogShipping property 1
  • troubleshooting
    • Data Guard 1
    • diagnostics logged in broker drc* log files 1
  • tuning
    • redo transport services 1
  • two-way communication channel 1

U

  • unobserved configuration 1
  • updating configuration properties 1
  • upgrading
    • Data Guard 1 , 2
    • Oracle Enterprise Manager 1
    • protection mode 1
  • user interfaces
    • overview 1

V

  • V$DATABASE view
    • fast-start failover columns 1
    • FS_FAILOVER_OBSERVER_HOST column 1
    • FS_FAILOVER_OBSERVER_PRESENT column 1
    • viewing
      • fast-start failover statistics 1
  • V$FS_FAILOVER_STATS view 1
  • VALIDATE DATABASE command 1
  • VALIDATE FAR_SYNC command 1
  • viewing
    • property information about databases 1 , 2

W

  • warning status 1
  • wizards
    • Add Standby Database 1