42 NCR-00001 to NCR-04028

NCR-00001: NCR: Could not allocate memory

Cause: Insufficient swap space or system memory.

Action: Increase swap space or system memory.

NCR-00002: NCR: Invalid usage

Cause: Bad function parameter.

Action: Check function call.

NCR-00003: NCR: Initialization failure

Cause: Usually insufficient swap space or system memory.

Action: Increase swap space or system memory.

NCR-01003: NCRS: Read error.

Cause: Failed to read data from an input device.

Action: Check the input device driver return code for further information.

NCR-01004: NCRS: Write error.

Cause: Failed to write data to an output device.

Action: Check the output device driver return code for further information.

NCR-01005: NCRS: Failed to flush the output buffer.

Cause: Failed to write data in the output buffer to an output device.

Action: Check the output device driver return code for further information.

NCR-01006: NCRS: Data buffer overflow.

Cause: An attempt to read or write data outside of a given data buffer.

Action: Check data buffer size.

NCR-01007: NCRS: Operation is not supported in a given mode.

Cause: Attempt to perform an operation which is not supported for the current mode.

Action: See documentation for a list of work modes and supported operations.

NCR-01008: NCRS: Failed to obtain transport parameters.

Cause: Could not identify transport layer parameters.

Action: Check the transport layer return code for further information.

NCR-01009: NCRS: Record handling error.

Cause: Encountered an invalid record or an attempt to read beyond last record.

Action: See documentation for description of record handling methods.

NCR-01010: NCRS: Invalid network address length.

Cause: Network address size is set to 0.

Action: See documentation for valid network address sizes.

NCR-01011: NCRS: Send message failure.

Cause: Failed to send a message over network.

Action: Check the network interface return code for further information.

NCR-01012: NCRS: Receive message failure.

Cause: Failed to receive a network message.

Action: Check the network interface return code for further information.

NCR-01013: NCRS: Unvalid connection type.

Cause: Connection type is other than stream or message.

Action: See documentation for description of connection types.

NCR-01018: NCRS: Encryption failure.

Cause: Can not do the encryption for the data.

Action: See the SNS documentation for more information.

NCR-01019: NCRS: Checksumming failure.

Cause: Can not add the checksumming for the data.

Action: See the SNS documentation for more information.

NCR-01020: NCRS: Operation would block.

Cause: An I/O operation returned with no data read/written because the transport connection is "non-blocking" and, to succeed, the operation would have needed to block.

Action: This is a soft error; retry the operation.

NCR-02003: NCRF: Invalid type passed to format interpreter.

Cause: The format interpreter was given a data type it did not recognize.

Action: Check the types returned to the interpreter from either the type callback routine or from the type context structure.

NCR-02004: NCRF: Invalid format interpreter type context

Cause: The format interpreter was given an invalid type context.

Action: This error usually happens due to an improperly described aggregrate. For example, declaring NCRF_END_STRUCT_DATA_TYPE within a context, without a complementary NCRF_STRUCT_DATA_TYPE, is invalid.

NCR-02005: NCRF: Invalid session mode

Cause: The data format layer received a session mode other than GET,PUT or FREE.

Action: None

NCR-02006: NCRF: Invalid floating point representation received

Cause: The data format layer received a floating point representation it did not recognize.

Action: Check incoming format descriptor for errors.

NCR-02007: NCRF: Invalid format descriptor received

Cause: The data format layer received an improperly formed format descriptor. Subsequent data could not be formatted.

Action: Check for data integrity on receipt from remote host.

NCR-02008: NCRF: Error within stream processing in format interpreter

Cause: An error occured while the interpreter was processing an NCRF_STREAM_DATA_TYPE.

Action: Check for data integrity, or for stream existence.

NCR-02009: NCRF: Unable to open trace file

Cause: Failure to open tracing file.

Action: Make sure that this is a legal file name and that the user has write access.

NCR-02010: NCRF: Call context is not available

Cause: Call context not passed to format context.

Action: Make sure that create call context has been called.

NCR-02011: NCRF: Exceeded maximum number of rfids.

Cause: Exceeded maximum number of rfids.

Action: Call Oracle Support.

NCR-03002: NCRO: Maximum number of contexts has been reached

Cause: An attempt to create either a call context or a service context has failed because all context slots are in use.

Action: Free-up context slots by destroying those contexts no longer required, or, reconfigure NCRO with more context slots.

NCR-03003: NCRO: Unexpected message

Cause: Message read from service connection is not of the expected type.

Action: Application error - debug and fix.

NCR-03004: NCRO: Unknown message

Cause: Message read from service connection is of unknown type.

Action: Internal error - contact customer support.

NCR-03005: NCRO: Orphan message

Cause: Message read from service connection is for a call context that no longer exists.

Action: Application error - debug and fix.

NCR-03006: NCRO: Invalid operation

Cause: Attempted operation over call context is invalid. For example, attempting to send IN args for a procedure which is defined to have none.

Action: Application error - debug and fix.

NCR-03007: NCRO: Context is busy

Cause: Attempted operation failed because service/call context is busy performing a previous operaion.

Action: Application error - debug and fix.

NCR-03008: NCRO: Call rejected

Cause: An attempt to execute a remote procedure has failed because the server has rejected the procedure id.

Action: If wrong procedure id, send the correct one. If wrong server was contacted, then contact the right one.

NCR-03009: NCRO: Protocol version mismatch

Cause: Client and server NCRO layers are at incompatible versions levels.

Action: Upgrade to latest NCRO version.

NCR-03010: NCRO: Transfer callback error

Cause: Application transfer callback function has returned a "FAILED" status.

Action: Debug the transfer callback function.

NCR-03012: NCRO: Invalid session mode

Cause: Attempted operation has failed because the session context is in an invalid state.

Action: Internal error - contact customer support.

NCR-03013: NCRO: Operation not supportd

Cause: Attempted operation is not supported on this service connection because it is incompatible with the NCRO version level of the remote application.

Action: Link remote application with latest NCR library.

NCR-03014: NCRO: Bad transport address

Cause: A service context cannot be created because the transport address descriptor (contained in the binding context) is invalid.

Action: Application error - initialize the transport address descriptor correctly.

NCR-03015: NCRO: No transport address

Cause: A service context cannot be created because no transport address was provided (in the binding context) and the transport protocol uses datagrams.

Action: Application error - provide a transport address.

NCR-03016: NCRO: Message has bad address

Cause: Message read from service connection has bad address information.

Action: Internal error - contact customer support.

NCR-03017: NCRO: Transport type RSLV not supported

Cause: Support for transport type RSLV has not been built.

Action: Re-compile NCR library with NCR_USE_RSLV defined.

NCR-03018: NCRO: Failed to make RSLV connection

Cause: Failure to make RSLV connection usually means that the name resolution failed or the resolved TNS address is bad.

Action: Make sure that the name is in TNSNAMES.ORA and that it is set to the correct TNS address.

NCR-03019: NCRO: Unable to initialize thread support

Cause: Attempt to initialize the Core thread package has failed.

Action: Internal error - contact customer support.

NCR-03020: NCRO: Invalid call context

Cause: The call context is not an valid call context.

Action: Call context was destroyed, probably because the Break was received

NCR-03021: NCRO: Reset the in-band line

Cause: Our parnter is asking to reset the in-band line, after receiving a break

Action: The in-band line is required to be reset

NCR-03022: NCRO: Cannot send the break

Cause: There is an error occur when sending the break using the side-band channel

Action: Read the documention regarding to side-band break support issues

NCR-03023: NCRO: Cannot receive the break

Cause: There is an error occur when receiving the break using the side-band channel

Action: Read the documention regarding to side-band break support issues

NCR-03024: NCRO: Transport type LIST not supported

Cause: Support for transport type LIST has not been built.

Action: Re-compile NCR library with NCR_USE_LIST defined.

NCR-03025: NCRO: Failed to make LIST connection(s)

Cause: Failure to make LIST connection(s) usually means one of two things: (1) Address list syntax error, (2) Could not connect with supplied addresses

Action: Check address list syntax and make sure that there is a 'listener' process for each (or some) of the supplied addresses.

NCR-03026: NCRO: The result buffer has overflowed

Cause: The result buffer for holding the pickling result is too small.

Action: Please enlarge the result buffer and try again.

NCR-03027: NCRO: No remote service session set up yet.

Cause: Sender-makes-right needs the remote FID.

Action: Please set up the remote session before using the Send Make's Right option.

NCR-03028: NCRO: Partner refused request for sender-makes-right.

Cause: Sender-makes-right was requested by the current side, yet refused by the server.

Action: Check the server side to see why it refused SMR.

NCR-04002: NCRR: Invalid interface descriptor

Cause: An attempt to register an interface has failed because of an invalid interface descriptor.

Action: Check interface descriptor passed into the ncrrri_register_interface call.

NCR-04003: NCRR: Interface exists

Cause: An attempt to register an interface has failed because an interface already exists.

Action: Application error - register a new interface, destroy the old one, or indicate that the old one must be replaced.

NCR-04004: NCRR: Invalid interface instance handle

Cause: A service registration API call has failed because of an invalid instance handle.

Action: Application error - debug and fix.

NCR-04005: NCRR: Invalid procedure handle

Cause: A procedure/object registration has failed because of an invalid procedural handle.

Action: Application error - debug and fix.

NCR-04006: NCRR: Invalid argument descriptor

Cause: A procedure registration has failed because of an invalid argument descriptor.

Action: Application error - debug and fix.

NCR-04007: NCRR: Invalid object handle

Cause: A service registration API call failed because of an invalid object handle, for example, one that does not exist.

Action: Application error - debug and fix.

NCR-04008: NCRR: Procedure exists

Cause: An attempt to register a remote procedure has failed because the procedure already exists in this interface.

Action: Application error - register a new procedure, destroy the old one, or indicate that the old one must be replaced.

NCR-04009: NCRR: Object exists

Cause: An attempt to register an object has failed because the object already exists in this interface.

Action: Application error - register a new object, destroy the old one, or indicate that the old one must be replaced.

NCR-04010: NCRR: Unable to contact Oracle Internet Directory Server

Cause: Service export or import failed to contact Oracle Internet Directory Server.

Action: Ensure Oracle Internet Directory configuration is correct. Otherwise, turn on tracing and/or contact customer support.

NCR-04011: NCRR: Oracle Internet Directory error

Cause: Service export or import failed during interaction with Oracle Internet Directory Server.

Action: Either wrong parameters with respect to the Remote Operations Service Registration Schema were passed in and/or the Oracle Internet Directory server refused to perform the requested operation. Refer the Remote Operations Service Registration Schema and/or turn on Oracle Internet Directory tracing and/or contact customer support.

NCR-04012: NCRR: Invalid address descriptor

Cause: An ncrrei_export_interface call failed because of an invalid address descriptor.

Action: Application error - debug and fix.

NCR-04013: NCRR: Insufficient authorization

Cause: Attempted Oracle Internet Directory Server operation has failed because of insufficient authorization.

Action: Contact customer support.

NCR-04014: NCRR: Invalid instance name

Cause: Service export or import failed because of an invalid instance name

Action: Application error - debug and fix.

NCR-04015: NCRR: Invalid interface name

Cause: Service export or import failed because of an invalid interface name

Action: Application error - debug and fix.

NCR-04016: NCRR: Last interface instance handle

Cause: The instance handle passed in is the last instance handle in the list.

Action: Not an error - means reaching the end of the list.

NCR-04017: NCRR: Unable to find the interface instance handle

Cause: The instance handle corresponding to the instance name was not found.

Action: Application error - debug and fix.

NCR-04018: NCRR: Unable to create the TNS address list

Cause: Unable to create the TNS address list from the interface instance list.

Action: Application error - debug and fix.

NCR-04019: NCRR: Interface or instance name already exists

Cause: Service export failed because the name already exists with the Oracle Internet Directory server

Action: Application error - debug and fix.

NCR-04020: NCRR: Interface or instance name does not exist

Cause: Service expunge/query failed because the name does not exist with the Oracle Internet Directory server

Action: Use Oracle Internet Directory tools on the relevant Oracle Internet Directory instance to verify the same. Otherwise turn on tracing and/or contact customer support

NCR-04021: NCRR: Pickler errors

Cause: Service export/query failed because of pickler errors

Action: Contact customer support

NCR-04022: NCRR: Invalid procedure descriptor

Cause: A procedure registration has failed because of an invalid procedural descriptor.

Action: Application error - debug and fix.

NCR-04023: NCRR: Invalid object descriptor

Cause: An object registration has failed because of an invalid object descriptor.

Action: Application error - debug and fix.

NCR-04024: NCRR: Maximum number of procedures reached

Cause: A procedure registration has failed because the procedures array is filled up.

Action: Re-register the interface increasing the maximum # of procedures.

NCR-04025: NCRR: Operation timed out

Cause: An operation for the Oracle Internet Directory server failed because it exceeded the timeout period.

Action: Retry the operation and/or turn on Oracle Internet Directory tracing.

NCR-04026: NCRR: Operation not supported

Cause: An operation for the Oracle Internet Directory server failed because it met with a server referral to another instance.

Action: Unify the Remote Ops registration entries into the Oracle Internet Directory instance and/or turn on Oracle Internet Directory tracing.

NCR-04027: NCRR: Operation failed

Cause: An operation for the Oracle Internet Directory server failed because the Service Registration interfaces met with invalid parameters.

Action: Contact customer support.

NCR-04028: NCRR: Operation failed

Cause: An operation for the Oracle Internet Directory server failed because the data involved exceeds the maximum allowed size.

Action: Check the entries in the Oracle Internet Directory instance with tools available from Oracle Internet Directory and/or turn on Oracle Internet Directory tracing.