Oracle recommends that you use the Database Resource Manager rather than this SQL statement to establish resource limits. The Database Resource Manager offers a more flexible means of managing and tracking resource use. For more information on the Database Resource Manager, refer to Oracle Database Administrator's Guide.
To specify resource limits for a user, you must:
Enable resource limits dynamically with the
SYSTEM statement or with the initialization parameter
RESOURCE_LIMIT. This parameter does not apply to password resources. Password resources are always enabled.
Create a profile that defines the limits using the
Assign the profile to the user using the
Oracle Database Security Guide for a detailed description and explanation of how to use password management and protection
To create a profile, you must have the
PROFILE system privilege.
To specify the
CONTAINER clause, you must be connected to a multitenant container database (CDB). To specify
ALL, the current container must be the root. To specify
CURRENT, the current container must be a pluggable database (PDB).
Specify the name of the profile to be created. The name must satisfy the requirements listed in "Database Object Naming Rules". Use profiles to limit the database resources available to a user for a single call or a single session.
In a non-CDB, a profile name cannot begin with
In a CDB, the requirements for a profile name are as follows:
The name of a common profile must begin with characters that are a case-insensitive match to the prefix specified by the
COMMON_USER_PREFIX initialization parameter. By default, the prefix is
The name of a local profile must not begin with characters that are a case-insensitive match to the prefix specified by the
COMMON_USER_PREFIX initialization parameter. Regardless of the value of
COMMON_USER_PREFIX, the name of a local profile can never begin with
If the value of
COMMON_USER_PREFIX is an empty string, then there are no requirements for common or local profile names with one exception: the name of a local profile can never begin with
c##. Oracle recommends against using an empty string value because it might result in conflicts between the names of local and common profiles when a PDB is plugged into a different CDB, or when opening a PDB that was closed when a common user was created.
Oracle Database enforces resource limits in the following ways:
If a user exceeds the
IDLE_TIME session resource limit, then the database rolls back the current transaction and ends the session. When the user process next issues a call, the database returns an error.
If a user attempts to perform an operation that exceeds the limit for other session resources, then the database aborts the operation, rolls back the current statement, and immediately returns an error. The user can then commit or roll back the current transaction, and must then end the session.
If a user attempts to perform an operation that exceeds the limit for a single call, then the database aborts the operation, rolls back the current statement, and returns an error, leaving the current transaction intact.
You can use fractions of days for all parameters that limit time, with days as units. For example, 1 hour is 1/24 and 1 minute is 1/1440.
You can specify resource limits for users regardless of whether the resource limits are enabled. However, Oracle Database does not enforce the limits until you enable them.
When specified with a resource parameter,
UNLIMITED indicates that a user assigned this profile can use an unlimited amount of this resource. When specified with a password parameter,
UNLIMITED indicates that no limit has been set for the parameter.
DEFAULT if you want to omit a limit for this resource in this profile. A user assigned this profile is subject to the limit for this resource specified in the
DEFAULT profile. The
DEFAULT profile initially defines unlimited resources. You can change those limits with the
Any user who is not explicitly assigned a profile is subject to the limits defined in the
DEFAULT profile. Also, if the profile that is explicitly assigned to a user omits limits for some resources or specifies
DEFAULT for some limits, then the user is subject to the limits on those resources defined by the
Specify the number of concurrent sessions to which you want to limit the user.
Specify the CPU time limit for a session, expressed in hundredth of seconds.
Specify the CPU time limit for a call (a parse, execute, or fetch), expressed in hundredths of seconds.
Specify the total elapsed time limit for a session, expressed in minutes.
Specify the permitted periods of continuous inactive time during a session, expressed in minutes. Long-running queries and other operations are not subject to this limit.
Specify the permitted number of data blocks read in a session, including blocks read from memory and disk.
Specify the permitted number of data blocks read for a call to process a SQL statement (a parse, execute, or fetch).
Specify the amount of private space a session can allocate in the shared pool of the system global area (SGA). Refer to size_clause for information on that clause.
This limit applies only if you are using shared server architecture. The private space for a session in the SGA includes private SQL and PL/SQL areas, but not shared SQL and PL/SQL areas.
Specify the total resource cost for a session, expressed in service units. Oracle Database calculates the total service units as a weighted sum of
Use the following clauses to set password parameters. Parameters that set lengths of time—that is, all the password parameters except
PASSWORD_REUSE_MAX—are interpreted in number of days. For testing purposes you can specify minutes (n/1440) or even seconds (n/86400) for these parameters. You can also use a decimal value for this purpose (for example .0833 for approximately one hour). The minimum value is 1 second. The maximum value is 24855 days. For
PASSWORD_REUSE_MAX, you must specify an integer.
Specify the number of consecutive failed attempts to log in to the user account before the account is locked. If you omit this clause, then the default is 10 times.
Specify the number of days the same password can be used for authentication. If you also set a value for
PASSWORD_GRACE_TIME, then the password expires if it is not changed within the grace period, and further connections are rejected. If you omit this clause, then the default is 180 days.
Oracle Database Security Guide for information on setting
PASSWORD_LIFE_TIME to a low value
These two parameters must be set in conjunction with each other.
PASSWORD_REUSE_TIME specifies the number of days before which a password cannot be reused.
PASSWORD_REUSE_MAX specifies the number of password changes required before the current password can be reused. For these parameter to have any effect, you must specify a value for both of them.
If you specify a value for both of these parameters, then the user cannot reuse a password until the password has been changed the number of times specified for
PASSWORD_REUSE_MAX during the number of days specified for
For example, if you specify
PASSWORD_REUSE_TIME to 30 and
PASSWORD_REUSE_MAX to 10, then the user can reuse the password after 30 days if the password has already been changed 10 times.
If you specify a value for either of these parameters and specify
UNLIMITED for the other, then the user can never reuse a password.
If you specify
DEFAULT for either parameter, then Oracle Database uses the value defined in the
DEFAULT profile. By default, all parameters are set to
UNLIMITED in the
DEFAULT profile. If you have not changed the default setting of
UNLIMITED in the
DEFAULT profile, then the database treats the value for that parameter as
If you set both of these parameters to
UNLIMITED, then the database ignores both of them. This is the default if you omit both parameters.
Specify the number of days an account will be locked after the specified number of consecutive failed login attempts. If you omit this clause, then the default is 1 day.
Specify the number of days after the grace period begins during which a warning is issued and login is allowed. If you omit this clause, then the default is 7 days.
Specify the permitted number of consecutive days of no logins to the user account, after which the account will be locked. The minimum value is 15 days. There is no maximum value. If you omit this clause, then the default is
PASSWORD_VERIFY_FUNCTION clause lets a PL/SQL password complexity verification script be passed as an argument to the
PROFILE statement. Oracle Database provides a default script, but you can create your own routine or use third-party software instead.
function, specify the name of the password complexity verification routine. The function must exist in the
SYS schema and you must have
EXECUTE privilege on the function.
NULL to indicate that no password verification is performed.
If you specify
expr for any of the password parameters, then the expression can be of any form except scalar subquery expression.
Restriction on Password Parameters
When you assign a profile to an external user or a global user, the password parameters do not take effect for that user.
CONTAINER clause applies when you are connected to a CDB. However, it is not necessary to specify the
CONTAINER clause because its default values are the only allowed values.
To create a common profile, you must be connected to the root. You can optionally specify
ALL, which is the default when you are connected to the root.
To create a local profile, you must be connected to a PDB. You can optionally specify
CURRENT, which is the default when you are connected to a PDB.
Creating a Profile: Example
The following statement creates the profile
CREATE PROFILE new_profile LIMIT PASSWORD_REUSE_MAX 10 PASSWORD_REUSE_TIME 30;
Setting Profile Resource Limits: Example
The following statement creates the profile
CREATE PROFILE app_user LIMIT SESSIONS_PER_USER UNLIMITED CPU_PER_SESSION UNLIMITED CPU_PER_CALL 3000 CONNECT_TIME 45 LOGICAL_READS_PER_SESSION DEFAULT LOGICAL_READS_PER_CALL 1000 PRIVATE_SGA 15K COMPOSITE_LIMIT 5000000;
If you assign the
app_user profile to a user, then the user is subject to the following limits in subsequent sessions:
The user can have any number of concurrent sessions.
In a single session, the user can consume an unlimited amount of CPU time.
A single call made by the user cannot consume more than 30 seconds of CPU time.
A single session cannot last for more than 45 minutes.
In a single session, the number of data blocks read from memory and disk is subject to the limit specified in the
A single call made by the user cannot read more than 1000 data blocks from memory and disk.
A single session cannot allocate more than 15 kilobytes of memory in the SGA.
In a single session, the total resource cost cannot exceed 5 million service units. The formula for calculating the total resource cost is specified by the
app_user profile omits a limit for
IDLE_TIME and for password limits, the user is subject to the limits on these resources specified in the
Setting Profile Password Limits: Example
The following statement creates the
app_user2 profile with password limits values set:
CREATE PROFILE app_user2 LIMIT FAILED_LOGIN_ATTEMPTS 5 PASSWORD_LIFE_TIME 60 PASSWORD_REUSE_TIME 60 PASSWORD_REUSE_MAX 5 PASSWORD_VERIFY_FUNCTION ora12c_verify_function PASSWORD_LOCK_TIME 1/24 PASSWORD_GRACE_TIME 10 INACTIVE_ACCOUNT_TIME 30;
This example uses the default Oracle Database password verification function,
ora12c_verify_function. Refer to Oracle Database Security Guide for information on using this verification function provided or designing your own verification function.