Verified CPE Devices

The following devices or software have been verified for use with VPN Connect.


Oracle provides configuration instructions for the vendors and devices in the following table. Make sure to use the configuration instructions for the correct vendor.

If the device or software version that Oracle used to verify the configuration does not exactly match your device or software, the configuration might still work for you. Consult your vendor's documentation and make any necessary adjustments.

If your device is for a vendor not in the following table, or if you're already familiar with configuring your device for IPSec, see the list of supported IPSec parameters and consult your vendor's documentation for assistance.

Vendor Device Minimum Software Version Configuration Media
Check Point Software Technologies 2200 or Open Server R80.20 Check Point Configuration Options Video
Cisco Systems ASA 9.7.1 (recommended) Cisco ASA Configuration Options Video: Route-based Video: Policy-based
Cisco Systems 2921 IOS version 15.4(3)M3 Cisco IOS Video
Fortinet FortiGate-VM 6.0.4 FortiGate Video
Furukawa Electric FITELnet-F220/F221 01.00(00)[0]00.00.0 [2019/07/05 15:00] Furukawa Electric  
Juniper Networks MX 240 JunOS 15.1 Juniper MX  
Juniper Networks SRX 240

JunOS 11.0

Juniper SRX Video
Libreswan   3.18 Libreswan Video
NEC IX3315 10.2.16 NEC IX Series  
NEC IX2106 10.2.16 NEC IX Series  
Palo Alto Networks PA-500 PanOS version 8.0.0 Palo Alto Video
WatchGuard Technologies Firebox Fireware v12 WatchGuard  
Yamaha RTX1210 Firmware Rev.14.01.28 Yamaha RTX Series  
Yamaha RTX830 Firmware Rev.15.02.03 Yamaha RTX Series