Networking Checklist

(If required) Proxies for internet connections

you can use a HTTP proxy (not HTTPS). This is a passive/corporate proxy supported for the connection from Compute Cloud@Customer to Oracle Cloud Infrastructure.

Administrator user name and password

The rack doesn't ship with a default administrative user account. You create an administrator account during the initial installation.

Passwords must contain at least 12 characters with at least one of each: uppercase character, lowercase character, digit, punctuation character, and no double quote ('"').

Region*

Specify the Oracle Cloud Infrastructure region name that Compute Cloud@Customer will be connect to. See Public Cloud Regions.

Availability Domain*

Specify the Oracle Cloud Infrastructure availability domain that Compute Cloud@Customer will be connected to.

System Name*

Name for the rack, and used as the Compute Cloud@Customer short name.

This attribute has a maximum length of 24 characters. Acceptable characters are "a" to "z", "A" to "Z", "0" to "9", and "-".

Once set, this parameter can't be changed.

Domain*

Domain name for your system which is used as the base domain for the internal network, and by Compute Cloud@Customer public facing services. This attribute has a maximum length of 190 characters. Acceptable characters are "a" to "z", "A" to "Z", "0" to"9", "-"

us.example.com

Once set this parameter can't be changed.

Rack Name

Description

Provide an optional description for Compute Cloud@Customer.

Routing Type*

Choose static or dynamic routing based on your network topology.

Uplink Gateway^†

IP address for the uplink switch to the default gateway in your data center. Chose a valid IP address in the customer data center subnet that the rack uplink switches are attached to.

10.68.48.86

Spine switch virtual IP^†

Virtual IP address which acts as the public VIP for the spine switches in your company network. Chose a valid IP address in the data center subnet that the rack uplink switches are attached to.

10.68.49.103

Uplink VLAN

VLAN used to connect to an uplink switch. Chose a VLAN value between 2 and 3899. VLANs 3900 to 4095 are reserved.

322

Uplink HSRP Group

Assign an HSRP group number to the rack. Acceptable values are 0 to 255, and the default value is 151. If there are multiple racks connected to the same data center infrastructure switches, ensure they use different HSRP groups.

Management node 1 IP addresses and host name*

10/25/40/100G*:

1G:

host name:

Static IP addresses for management node 1 in your company network.

Provide a valid host name. An appended domain name is used if you don't provide a host name.

Management node 2 IP addresses and host name*

10/25/40/100G*:

1G:

host name:

Static IP addresses for management node 2 in your company network.

Provide a valid host name. An appended domain name is used if you don't provide a host name.

Management node 3 IP addresses and host name*

10/25/40/100G*:

1G:

host name:

Static IP addresses for management node 3 in your company network.

Provide a valid host name. An appended domain name is used if you don't provide a host name.

Management virtual IP address and host name*

10/25/40/100G*:

1G:

host name*:

Virtual IP addresses of the management node cluster in your company network. This is the IP used to DNAT to the internal management node VIP. Compute Cloud@Customer DNS will resolve Compute Cloud@Customer endpoints to this IP.

Chose a valid IP address in the data center CIDR.

10.68.49.170

Provide a valid host name. An appended domain name is used if you don't provide a host name.

Spine switch 1 IP address*

IP address for the spine switch 1 in your company network. Chose a valid IP address in the data center subnet that the rack uplink switches are attached to.

10.68.49.101

Spine switch 2 IP address*

IP address for the spine switch 2 in your company network. Chose a valid IP address in the data center subnet that the rack uplink switches are attached to.

10.68.49.102

Peer 1 IP^‡

Neighbor BGP IP - IP address of customer data center router-1 that the rack uplink switches are attached to.

10.68.48.86

Peer 1 ASN^‡

BGP ASN of customer data center router-1.

64512-65533 or 4200000000-4294967294 

Peer 2 IP^‡

Neighbor BGP IP - IP address of customer data center router-2 that the rack uplink switches are attached to.

10.68.48.88

Peer 2 ASN^‡

BGP ASN of customer data center router-2

64512-65533 or 4200000000-4294967294

Uplink Gateway*

IP address for the uplink switch to the default gateway in your data center. Chose a valid IP address in customer data center subnet that the rack uplink switches are attached to.

10.68.48.86

Oracle ASN

The default is 136025.

BGP Topology

Options are triangle, square, or mesh. The default is mesh.

BGP Authentication

(Optional) Admin BGP Authentication

Enable BGP authentication for your network, and admin network if used.

BGP Authentication Password (Required)

Admin BGP Authentication Password (Required if admin network used)

Enter the BGP authentication password for your network, and admin network if used.

BGP KeepAlive Timer

The default is 60.

BGP Holddown Timer

The default is 180.

Enable MDA Authentication

The default is false.

Uplink Port Speed*

All uplink ports must have the identical speed. The options are 10, 25, 40, 100. The default is 100.

Uplink Port Count*

The number of uplink ports per spine switch. Connectivity must be identical on both spine switches to provide redundancy and load-splitting.

For 100G and 40G speeds, valid values are 1, 2 and 4. For 10G and 25G ports, valid values are 1, 2, 4, 8 and 16. The default for both is 4.

Uplink VLAN MTU*

MTU size determines the maximum packet size that can be transmitted over your uplink connection. The valid range is 68 to 9216. The default is 9216.

Uplink Netmask*

Netmask of the subnet rack is connected to in your data center.

255.255.252.0

Uplink Port FEC

Configure Forward Error Correct (FEC) for the uplink port. The default option is auto, with on and off as other valid options.

NTP servers*

At least one valid IP address for an NTP server in your data center. You can enter multiple IP addresses in a comma-separated list.

10.147.24.1,10.211.17.1

Admin Networking

enable

Enable a separate Administration network to transport administrative traffic.

Admin Port Speed

Port speed options are 10, 25, 40, 100. The port speed of your administration port can be different from the data port speed.

Admin Port Count

For 100G and 40G speeds, valid value is 1. For 10G and 25G ports, valid values are 1 to 4.

Admin HSRP Group

Assign an HSRP group number to your Administration network. Acceptable values are 0 to 255, and the default value is 152. If there are multiple racks connected to the same data center infrastructure switches, ensure they use different HSRP groups.

Admin VLAN

VLAN used to connect to the Administration network (only access mode supported). The valid range for users to select is 2 to 3899. The default is 3915, in the Oracle-reserved range.

Admin VLAN MTU

MTU size determines the maximum packet size that can be transmitted over your administration connection. The valid range is 68 to 9216. The default is 9216.

Admin Port FEC

Configure Forward Error Correct (FEC) for the administration port. The default option is auto, with on and off as other valid options.

Admin Gateway IP

IP address of the default gateway in your Administration network.

10.168.141.1

Admin Netmask

Netmask of the subnet the Administration network is connected to.

Admin CIDR

CIDR range for which the default route is the Administration gateway IP.

Management node 1 IP addresses and host name

10/25/40/100G:

1G:

host name:

Static IP addresses for management node 1 in the administration network.

Provide a valid host name. An appended domain name is used if you don't provide a host name.

Management node 2 IP addresses and host name

10/25/40/100G:

1G:

host name:

Static IP addresses for management node 2 in the administration network.

Provide a valid host name. An appended domain name is used if you don't provide a host name.

Management node 3 IP addresses and host name

10/25/40/100G:

1G:

host name:

Static IP addresses for management node 3 in the administration network.

Provide a valid host name. An appended domain name is used if you don't provide a host name.

Management virtual IP address and host name*

10/25/40/100G*:

1G:

host name*:

Virtual IP address of the management node cluster in the administration network. This is the IP used to DNAT to the internal management node VIP. Compute Cloud@Customer DNS will resolve Compute Cloud@Customer endpoints to this IP.

Chose a valid IP address in the administration network CIDR.

10.168.141.170

Provide a valid host name. An appended domain name is used if you don't provide a host name.

Admin DNS servers

IP addresses for 1-3 DNS servers providing name resolution in the administration network.

10.168.20.31,10.168.20.32,10.147.36.60

Admin Spine 1 IP

Public IP address of spine switch 1. Needed for HSRP configuration or the spine virtual IP.

Admin Spine 2 IP

Public IP address of spine switch 2. Needed for HSRP configuration or the spine virtual IP.

Admin Spine VIP

Public virtual IP of the spine switches.

DNS server 1

IP address for primary DNS server.

10.68.50.60

DNS server 2

IP address for secondary DNS server.

10.147.36.60

DNS server 3

IP address for tertiary DNS server.

206.233.27.1

Public IP Addresses

A range of customer data center IP addresses can be used for Compute Cloud@Customer components that require public IP addresses. Note: In this context, public IP addresses refer to IP addresses that have access to the data center network from the Compute Cloud@Customer subnet.

You must specify IP addresses or ranges that are routed to the Compute Cloud@Customer from the data center. Route tables must be correct and consistent.

Enter a string containing a comma separated list of valid CIDRs.

"10.68.49.249","10.68.50.32/32","10.68.51.4/31"

Partial CIDR deletion isn't supported.

Object Storage IP address

Valid IP address for an objectstorage endpoint that is outside the public IP range.