| Class | Description |
|---|---|
| AddDrgRouteDistributionStatementDetails |
Details used to add a route distribution statement.
|
| AddDrgRouteDistributionStatementDetails.Builder | |
| AddDrgRouteDistributionStatementsDetails |
Details request to add statements to a route distribution.
|
| AddDrgRouteDistributionStatementsDetails.Builder | |
| AddDrgRouteRuleDetails |
Details needed when adding a DRG route rule.
|
| AddDrgRouteRuleDetails.Builder | |
| AddDrgRouteRulesDetails |
Details used in a request to add static routes to a DRG route table.
|
| AddDrgRouteRulesDetails.Builder | |
| AddedNetworkSecurityGroupSecurityRules |
Note: Objects should always be created or deserialized using the AddedNetworkSecurityGroupSecurityRules.Builder. |
| AddedNetworkSecurityGroupSecurityRules.Builder | |
| AddImageShapeCompatibilityEntryDetails |
Image shape compatibility details.
|
| AddImageShapeCompatibilityEntryDetails.Builder | |
| AddNetworkSecurityGroupSecurityRulesDetails |
Note: Objects should always be created or deserialized using the AddNetworkSecurityGroupSecurityRulesDetails.Builder. |
| AddNetworkSecurityGroupSecurityRulesDetails.Builder | |
| AddPublicIpPoolCapacityDetails |
The information used to add capacity to an IP pool.
|
| AddPublicIpPoolCapacityDetails.Builder | |
| AddSecurityRuleDetails |
A rule for allowing inbound (INGRESS) or outbound (EGRESS) IP packets.
|
| AddSecurityRuleDetails.Builder | |
| AddSubnetIpv6CidrDetails |
Details used when adding an IPv6 prefix to a subnet.
|
| AddSubnetIpv6CidrDetails.Builder | |
| AddVcnCidrDetails |
Details used to add a CIDR block to a VCN.
|
| AddVcnCidrDetails.Builder | |
| AddVcnIpv6CidrDetails |
Details used when adding a ULA or private IPv6 prefix or an IPv6 GUA assigned by Oracle or a
BYOIPv6 prefix.
|
| AddVcnIpv6CidrDetails.Builder | |
| AllowedIkeIPSecParameters |
Lists the current allowed and default IPSec tunnel parameters.
|
| AllowedIkeIPSecParameters.Builder | |
| AllowedPhaseOneParameters |
Allowed phase one parameters.
|
| AllowedPhaseOneParameters.Builder | |
| AllowedPhaseTwoParameters |
Allowed phase two parameters.
|
| AllowedPhaseTwoParameters.Builder | |
| AmdMilanBmGpuLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal GPU instance with the following
shape: BM.GPU.GM4.8 (also named BM.GPU.A100-v2.8) (the AMD Milan platform).
|
| AmdMilanBmGpuLaunchInstancePlatformConfig.Builder | |
| AmdMilanBmGpuPlatformConfig |
The platform configuration used when launching a bare metal GPU instance with the following
shape: BM.GPU.GM4.8 (also named BM.GPU.A100-v2.8) (the AMD Milan platform).
|
| AmdMilanBmGpuPlatformConfig.Builder | |
| AmdMilanBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with one of the following
shapes: BM.Standard.E4.128 or BM.DenseIO.E4.128 (the AMD Milan platform).
|
| AmdMilanBmLaunchInstancePlatformConfig.Builder | |
| AmdMilanBmPlatformConfig |
The platform configuration used when launching a bare metal instance with one of the following
shapes: BM.Standard.E4.128 or BM.DenseIO.E4.128 (the AMD Milan platform).
|
| AmdMilanBmPlatformConfig.Builder | |
| AmdRomeBmGpuLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal GPU instance with the BM.GPU4.8 shape
(the AMD Rome platform).
|
| AmdRomeBmGpuLaunchInstancePlatformConfig.Builder | |
| AmdRomeBmGpuPlatformConfig |
The platform configuration of a bare metal GPU instance that uses the BM.GPU4.8 shape (the AMD
Rome platform).
|
| AmdRomeBmGpuPlatformConfig.Builder | |
| AmdRomeBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with the BM.Standard.E3.128
shape (the AMD Rome platform).
|
| AmdRomeBmLaunchInstancePlatformConfig.Builder | |
| AmdRomeBmPlatformConfig |
The platform configuration of a bare metal instance that uses the BM.Standard.E3.128 shape (the
AMD Rome platform).
|
| AmdRomeBmPlatformConfig.Builder | |
| AmdVmLaunchInstancePlatformConfig |
The platform configuration used when launching a virtual machine instance with the AMD platform.
|
| AmdVmLaunchInstancePlatformConfig.Builder | |
| AmdVmPlatformConfig |
The platform configuration of a virtual machine instance that uses the AMD platform.
|
| AmdVmPlatformConfig.Builder | |
| AmdVmUpdateInstancePlatformConfig |
The platform configuration used when updating a virtual machine instance with the AMD platform.
|
| AmdVmUpdateInstancePlatformConfig.Builder | |
| AppCatalogListing |
Listing details.
|
| AppCatalogListing.Builder | |
| AppCatalogListingResourceVersion |
Listing Resource Version
Note: Objects should always be created or deserialized using the AppCatalogListingResourceVersion.Builder. |
| AppCatalogListingResourceVersion.Builder | |
| AppCatalogListingResourceVersionAgreements |
Agreements for a listing resource version.
|
| AppCatalogListingResourceVersionAgreements.Builder | |
| AppCatalogListingResourceVersionSummary |
Listing Resource Version summary
Note: Objects should always be created or deserialized using the AppCatalogListingResourceVersionSummary.Builder. |
| AppCatalogListingResourceVersionSummary.Builder | |
| AppCatalogListingSummary |
A summary of a listing.
|
| AppCatalogListingSummary.Builder | |
| AppCatalogSubscription |
a subscription for a listing resource version.
|
| AppCatalogSubscription.Builder | |
| AppCatalogSubscriptionSummary |
a subscription summary for a listing resource version.
|
| AppCatalogSubscriptionSummary.Builder | |
| AttachBootVolumeDetails |
Note: Objects should always be created or deserialized using the AttachBootVolumeDetails.Builder. |
| AttachBootVolumeDetails.Builder | |
| AttachEmulatedVolumeDetails |
Note: Objects should always be created or deserialized using the AttachEmulatedVolumeDetails.Builder. |
| AttachEmulatedVolumeDetails.Builder | |
| AttachInstancePoolInstanceDetails |
An instance that is to be attached to an instance pool.
|
| AttachInstancePoolInstanceDetails.Builder | |
| AttachIScsiVolumeDetails |
Note: Objects should always be created or deserialized using the AttachIScsiVolumeDetails.Builder. |
| AttachIScsiVolumeDetails.Builder | |
| AttachLoadBalancerDetails |
Represents a load balancer that is to be attached to an instance pool.
|
| AttachLoadBalancerDetails.Builder | |
| AttachParavirtualizedVolumeDetails |
Note: Objects should always be created or deserialized using the AttachParavirtualizedVolumeDetails.Builder. |
| AttachParavirtualizedVolumeDetails.Builder | |
| AttachServiceDeterminedVolumeDetails |
Note: Objects should always be created or deserialized using the AttachServiceDeterminedVolumeDetails.Builder. |
| AttachServiceDeterminedVolumeDetails.Builder | |
| AttachVnicDetails |
Note: Objects should always be created or deserialized using the AttachVnicDetails.Builder. |
| AttachVnicDetails.Builder | |
| AttachVolumeDetails |
Note: Objects should always be created or deserialized using the Builder. |
| AutotunePolicy |
An autotune policy automatically tunes the volume’s performace based on the type of the policy.
|
| BgpSessionInfo |
Information for establishing a BGP session for the IPSec tunnel.
|
| BgpSessionInfo.Builder | |
| BlockVolumeReplica |
An asynchronous replica of a block volume that can then be used to create a new block volume or
recover a block volume.
|
| BlockVolumeReplica.Builder | |
| BlockVolumeReplicaDetails |
Contains the details for the block volume replica
Note: Objects should always be created or deserialized using the BlockVolumeReplicaDetails.Builder. |
| BlockVolumeReplicaDetails.Builder | |
| BlockVolumeReplicaInfo |
Information about the block volume replica in the destination availability domain.
|
| BlockVolumeReplicaInfo.Builder | |
| BooleanImageCapabilitySchemaDescriptor |
Boolean type ImageCapabilitySchemaDescriptor
Note: Objects should always be created or deserialized using the BooleanImageCapabilitySchemaDescriptor.Builder. |
| BooleanImageCapabilitySchemaDescriptor.Builder | |
| BootVolume |
A detachable boot volume device that contains the image used to boot a Compute instance.
|
| BootVolume.Builder | |
| BootVolumeAttachment |
Represents an attachment between a boot volume and an instance.
|
| BootVolumeAttachment.Builder | |
| BootVolumeBackup |
A point-in-time copy of a boot volume that can then be used to create a new boot volume or
recover a boot volume.
|
| BootVolumeBackup.Builder | |
| BootVolumeKmsKey |
The Vault service master encryption key associated with this volume.
|
| BootVolumeKmsKey.Builder | |
| BootVolumeReplica |
An asynchronous replica of a boot volume that can then be used to create a new boot volume or
recover a boot volume.
|
| BootVolumeReplica.Builder | |
| BootVolumeReplicaDetails |
Contains the details for the boot volume replica
Note: Objects should always be created or deserialized using the BootVolumeReplicaDetails.Builder. |
| BootVolumeReplicaDetails.Builder | |
| BootVolumeReplicaInfo |
Information about the boot volume replica in the destination availability domain.
|
| BootVolumeReplicaInfo.Builder | |
| BootVolumeSourceDetails |
Note: Objects should always be created or deserialized using the Builder. |
| BootVolumeSourceFromBootVolumeBackupDetails |
Specifies the boot volume backup.
|
| BootVolumeSourceFromBootVolumeBackupDetails.Builder | |
| BootVolumeSourceFromBootVolumeDetails |
Specifies the source boot volume.
|
| BootVolumeSourceFromBootVolumeDetails.Builder | |
| BootVolumeSourceFromBootVolumeReplicaDetails |
Specifies the source boot volume replica which the boot volume will be created from.
|
| BootVolumeSourceFromBootVolumeReplicaDetails.Builder | |
| BulkAddVirtualCircuitPublicPrefixesDetails |
Note: Objects should always be created or deserialized using the BulkAddVirtualCircuitPublicPrefixesDetails.Builder. |
| BulkAddVirtualCircuitPublicPrefixesDetails.Builder | |
| BulkDeleteVirtualCircuitPublicPrefixesDetails |
Note: Objects should always be created or deserialized using the BulkDeleteVirtualCircuitPublicPrefixesDetails.Builder. |
| BulkDeleteVirtualCircuitPublicPrefixesDetails.Builder | |
| ByoipAllocatedRangeCollection |
Results of a
ListByoipAllocatedRanges operation. |
| ByoipAllocatedRangeCollection.Builder | |
| ByoipAllocatedRangeSummary |
A summary of CIDR block subranges that are currently allocated to an IP pool.
|
| ByoipAllocatedRangeSummary.Builder | |
| ByoipRange |
Oracle offers the ability to Bring Your Own IP (BYOIP), importing public IP addresses or IPv6
addresses that you currently own to Oracle Cloud Infrastructure.
|
| ByoipRange.Builder | |
| ByoipRangeCollection |
The results returned by a
ListByoipRange operation. |
| ByoipRangeCollection.Builder | |
| ByoipRangeSummary |
Information about a
ByoipRange resource. |
| ByoipRangeSummary.Builder | |
| ByoipRangeVcnIpv6AllocationSummary |
A summary of IPv6 prefix subranges currently allocated to a VCN.
|
| ByoipRangeVcnIpv6AllocationSummary.Builder | |
| Byoipv6CidrDetails |
The list of one or more BYOIPv6 prefixes for the VCN that meets the following criteria: - The
prefix must be from a BYOIPv6 range.
|
| Byoipv6CidrDetails.Builder | |
| CapacityReportInstanceShapeConfig |
The shape configuration for a shape in a capacity report.
|
| CapacityReportInstanceShapeConfig.Builder | |
| CapacityReportShapeAvailability |
Information about the available capacity for a shape.
|
| CapacityReportShapeAvailability.Builder | |
| CapacityReservationInstanceSummary |
Condensed instance data when listing instances in a compute capacity reservation.
|
| CapacityReservationInstanceSummary.Builder | |
| CapacitySource |
A capacity source of bare metal hosts.
|
| CaptureConsoleHistoryDetails |
Note: Objects should always be created or deserialized using the CaptureConsoleHistoryDetails.Builder. |
| CaptureConsoleHistoryDetails.Builder | |
| CaptureFilter |
A capture filter contains a set of
captureFilterRuleDetails governing
what traffic is mirrored for a Vtap or captured for a VCN Flow
Log. |
| CaptureFilter.Builder | |
| ChangeBootVolumeBackupCompartmentDetails |
Contains the details for the compartment to move the boot volume backup to.
|
| ChangeBootVolumeBackupCompartmentDetails.Builder | |
| ChangeBootVolumeCompartmentDetails |
Contains the details for the compartment to move the boot volume to.
|
| ChangeBootVolumeCompartmentDetails.Builder | |
| ChangeByoipRangeCompartmentDetails |
The configuration details for the move operation.
|
| ChangeByoipRangeCompartmentDetails.Builder | |
| ChangeCaptureFilterCompartmentDetails |
These configuration details are used in the move operation when changing the compartment
containing a capture filter.
|
| ChangeCaptureFilterCompartmentDetails.Builder | |
| ChangeClusterNetworkCompartmentDetails |
The configuration details for the move operation.
|
| ChangeClusterNetworkCompartmentDetails.Builder | |
| ChangeComputeCapacityReservationCompartmentDetails |
Specifies the compartment to move the compute capacity reservation to.
|
| ChangeComputeCapacityReservationCompartmentDetails.Builder | |
| ChangeComputeCapacityTopologyCompartmentDetails |
Specifies the compartment to move the compute capacity topology to.
|
| ChangeComputeCapacityTopologyCompartmentDetails.Builder | |
| ChangeComputeClusterCompartmentDetails |
The configuration details for the move operation.
|
| ChangeComputeClusterCompartmentDetails.Builder | |
| ChangeComputeImageCapabilitySchemaCompartmentDetails |
The configuration details for the move operation.
|
| ChangeComputeImageCapabilitySchemaCompartmentDetails.Builder | |
| ChangeCpeCompartmentDetails |
The configuration details for the move operation.
|
| ChangeCpeCompartmentDetails.Builder | |
| ChangeCrossConnectCompartmentDetails |
The configuration details for the move operation.
|
| ChangeCrossConnectCompartmentDetails.Builder | |
| ChangeCrossConnectGroupCompartmentDetails |
The configuration details for the move operation.
|
| ChangeCrossConnectGroupCompartmentDetails.Builder | |
| ChangeDedicatedVmHostCompartmentDetails |
Specifies the compartment to move the dedicated virtual machine host to.
|
| ChangeDedicatedVmHostCompartmentDetails.Builder | |
| ChangeDhcpOptionsCompartmentDetails |
The configuration details for the move operation.
|
| ChangeDhcpOptionsCompartmentDetails.Builder | |
| ChangeDrgCompartmentDetails |
The configuration details for the move operation.
|
| ChangeDrgCompartmentDetails.Builder | |
| ChangeImageCompartmentDetails |
The configuration details for the move operation.
|
| ChangeImageCompartmentDetails.Builder | |
| ChangeInstanceCompartmentDetails |
The configuration details for the move operation.
|
| ChangeInstanceCompartmentDetails.Builder | |
| ChangeInstanceConfigurationCompartmentDetails |
The configuration details for the move operation.
|
| ChangeInstanceConfigurationCompartmentDetails.Builder | |
| ChangeInstancePoolCompartmentDetails |
The configuration details for the move operation.
|
| ChangeInstancePoolCompartmentDetails.Builder | |
| ChangeInternetGatewayCompartmentDetails |
The configuration details for the move operation.
|
| ChangeInternetGatewayCompartmentDetails.Builder | |
| ChangeIPSecConnectionCompartmentDetails |
The configuration details for the move operation.
|
| ChangeIPSecConnectionCompartmentDetails.Builder | |
| ChangeLocalPeeringGatewayCompartmentDetails |
The configuration details for the move operation.
|
| ChangeLocalPeeringGatewayCompartmentDetails.Builder | |
| ChangeNatGatewayCompartmentDetails |
The configuration details for the move operation.
|
| ChangeNatGatewayCompartmentDetails.Builder | |
| ChangeNetworkSecurityGroupCompartmentDetails |
Note: Objects should always be created or deserialized using the ChangeNetworkSecurityGroupCompartmentDetails.Builder. |
| ChangeNetworkSecurityGroupCompartmentDetails.Builder | |
| ChangePublicIpCompartmentDetails |
The configuration details for the move operation.
|
| ChangePublicIpCompartmentDetails.Builder | |
| ChangePublicIpPoolCompartmentDetails |
The configuration details for the move operation.
|
| ChangePublicIpPoolCompartmentDetails.Builder | |
| ChangeRemotePeeringConnectionCompartmentDetails |
The configuration details for the move operation.
|
| ChangeRemotePeeringConnectionCompartmentDetails.Builder | |
| ChangeRouteTableCompartmentDetails |
The configuration details for the move operation.
|
| ChangeRouteTableCompartmentDetails.Builder | |
| ChangeSecurityListCompartmentDetails |
The configuration details for the move operation.
|
| ChangeSecurityListCompartmentDetails.Builder | |
| ChangeServiceGatewayCompartmentDetails |
The configuration details for the move operation.
|
| ChangeServiceGatewayCompartmentDetails.Builder | |
| ChangeSubnetCompartmentDetails |
The configuration details for the move operation.
|
| ChangeSubnetCompartmentDetails.Builder | |
| ChangeVcnCompartmentDetails |
The configuration details for the move operation.
|
| ChangeVcnCompartmentDetails.Builder | |
| ChangeVirtualCircuitCompartmentDetails |
The configuration details for the move operation.
|
| ChangeVirtualCircuitCompartmentDetails.Builder | |
| ChangeVlanCompartmentDetails |
The configuration details for the move operation.
|
| ChangeVlanCompartmentDetails.Builder | |
| ChangeVolumeBackupCompartmentDetails |
Contains the details for the compartment to move the volume backup to.
|
| ChangeVolumeBackupCompartmentDetails.Builder | |
| ChangeVolumeCompartmentDetails |
Contains the details for the compartment to move the volume to.
|
| ChangeVolumeCompartmentDetails.Builder | |
| ChangeVolumeGroupBackupCompartmentDetails |
Contains the details for the compartment to move the volume group backup to.
|
| ChangeVolumeGroupBackupCompartmentDetails.Builder | |
| ChangeVolumeGroupCompartmentDetails |
Contains the details for the compartment to move the volume group to.
|
| ChangeVolumeGroupCompartmentDetails.Builder | |
| ChangeVtapCompartmentDetails |
These configuration details are used in the move operation when changing the compartment
containing a virtual test access point (VTAP).
|
| ChangeVtapCompartmentDetails.Builder | |
| ClusterConfigDetails |
The HPC cluster configuration requested when launching instances in a compute capacity
reservation.
|
| ClusterConfigDetails.Builder | |
| ClusterConfigurationDetails |
The HPC cluster configuration requested when launching instances of a cluster network.
|
| ClusterConfigurationDetails.Builder | |
| ClusterNetwork |
A cluster network is a group of high performance computing (HPC), GPU, or optimized bare metal
instances that are connected with an ultra low-latency remote direct memory access (RDMA)
network.
|
| ClusterNetwork.Builder | |
| ClusterNetworkPlacementConfigurationDetails |
The location for where the instance pools in a cluster network will place instances.
|
| ClusterNetworkPlacementConfigurationDetails.Builder | |
| ClusterNetworkSummary |
Summary information for a cluster network with instance
pools.
|
| ClusterNetworkSummary.Builder | |
| CompartmentInternal |
Helper definition required to perform authZ using SPLAT expressions on a Compartment
Note: Objects should always be created or deserialized using the CompartmentInternal.Builder. |
| CompartmentInternal.Builder | |
| ComputeBareMetalHost |
A compute bare metal host.
|
| ComputeBareMetalHost.Builder | |
| ComputeBareMetalHostCollection |
A list of compute bare metal hosts.
|
| ComputeBareMetalHostCollection.Builder | |
| ComputeBareMetalHostSummary |
Summary information for a compute bare metal host.
|
| ComputeBareMetalHostSummary.Builder | |
| ComputeCapacityReport |
A report of the host capacity within an availability domain that is available for you to create
compute instances.
|
| ComputeCapacityReport.Builder | |
| ComputeCapacityReservation |
A template that defines the settings to use when creating compute capacity reservations.
|
| ComputeCapacityReservation.Builder | |
| ComputeCapacityReservationInstanceShapeSummary |
An available shape used to launch instances in a compute capacity reservation.
|
| ComputeCapacityReservationInstanceShapeSummary.Builder | |
| ComputeCapacityReservationSummary |
Summary information for a compute capacity reservation.
|
| ComputeCapacityReservationSummary.Builder | |
| ComputeCapacityTopology |
A compute capacity topology that allows you to query your bare metal hosts and their RDMA network
topology.
|
| ComputeCapacityTopology.Builder | |
| ComputeCapacityTopologyCollection |
A list of compute capacity topologies.
|
| ComputeCapacityTopologyCollection.Builder | |
| ComputeCapacityTopologySummary |
Summary information for a compute capacity topology.
|
| ComputeCapacityTopologySummary.Builder | |
| ComputeCluster |
A remote direct memory access (RDMA) network group.
|
| ComputeCluster.Builder | |
| ComputeClusterCollection |
A list of compute clusters that match filter criteria, if any.
|
| ComputeClusterCollection.Builder | |
| ComputeClusterSummary |
Summary information for a compute cluster.
|
| ComputeClusterSummary.Builder | |
| ComputeGlobalImageCapabilitySchema |
Compute Global Image Capability Schema is a container for a set of compute global image
capability schema versions
Note: Objects should always be created or deserialized using the ComputeGlobalImageCapabilitySchema.Builder. |
| ComputeGlobalImageCapabilitySchema.Builder | |
| ComputeGlobalImageCapabilitySchemaSummary |
Summary information for a compute global image capability schema
Note: Objects should always be created or deserialized using the ComputeGlobalImageCapabilitySchemaSummary.Builder. |
| ComputeGlobalImageCapabilitySchemaSummary.Builder | |
| ComputeGlobalImageCapabilitySchemaVersion |
Compute Global Image Capability Schema Version is a set of all possible capabilities for a
collection of images.
|
| ComputeGlobalImageCapabilitySchemaVersion.Builder | |
| ComputeGlobalImageCapabilitySchemaVersionSummary |
Summary information for a compute global image capability schema
Note: Objects should always be created or deserialized using the ComputeGlobalImageCapabilitySchemaVersionSummary.Builder. |
| ComputeGlobalImageCapabilitySchemaVersionSummary.Builder | |
| ComputeHpcIsland |
A compute HPC island.
|
| ComputeHpcIsland.Builder | |
| ComputeHpcIslandCollection |
A list of compute HPC islands.
|
| ComputeHpcIslandCollection.Builder | |
| ComputeHpcIslandSummary |
Summary information for a compute HPC island.
|
| ComputeHpcIslandSummary.Builder | |
| ComputeImageCapabilitySchema |
Compute Image Capability Schema is a set of capabilities that filter the compute global
capability schema version for an image.
|
| ComputeImageCapabilitySchema.Builder | |
| ComputeImageCapabilitySchemaSummary |
Summary information for a compute image capability schema
Note: Objects should always be created or deserialized using the ComputeImageCapabilitySchemaSummary.Builder. |
| ComputeImageCapabilitySchemaSummary.Builder | |
| ComputeInstanceDetails |
Compute Instance Configuration instance details.
|
| ComputeInstanceDetails.Builder | |
| ComputeInstanceOptions |
Multiple Compute Instance Configuration instance details.
|
| ComputeInstanceOptions.Builder | |
| ComputeNetworkBlock |
A compute network block.
|
| ComputeNetworkBlock.Builder | |
| ComputeNetworkBlockCollection |
A list of compute network blocks.
|
| ComputeNetworkBlockCollection.Builder | |
| ComputeNetworkBlockSummary |
Summary information for a compute network block.
|
| ComputeNetworkBlockSummary.Builder | |
| ConnectLocalPeeringGatewaysDetails |
Information about the other local peering gateway (LPG).
|
| ConnectLocalPeeringGatewaysDetails.Builder | |
| ConnectRemotePeeringConnectionsDetails |
Information about the other remote peering connection (RPC).
|
| ConnectRemotePeeringConnectionsDetails.Builder | |
| ConsoleHistory |
An instance’s serial console data.
|
| ConsoleHistory.Builder | |
| CopyBootVolumeBackupDetails |
Note: Objects should always be created or deserialized using the CopyBootVolumeBackupDetails.Builder. |
| CopyBootVolumeBackupDetails.Builder | |
| CopyVolumeBackupDetails |
Note: Objects should always be created or deserialized using the CopyVolumeBackupDetails.Builder. |
| CopyVolumeBackupDetails.Builder | |
| CopyVolumeGroupBackupDetails |
Note: Objects should always be created or deserialized using the CopyVolumeGroupBackupDetails.Builder. |
| CopyVolumeGroupBackupDetails.Builder | |
| Cpe |
An object you create when setting up a Site-to-Site VPN between your on-premises network and VCN.
|
| Cpe.Builder | |
| CpeDeviceConfigAnswer |
An individual answer to a CPE device question.
|
| CpeDeviceConfigAnswer.Builder | |
| CpeDeviceConfigQuestion |
An individual question that the customer can answer about the CPE device.
|
| CpeDeviceConfigQuestion.Builder | |
| CpeDeviceInfo |
Basic information about a particular CPE device type.
|
| CpeDeviceInfo.Builder | |
| CpeDeviceShapeDetail |
The detailed information about a particular CPE device type.
|
| CpeDeviceShapeDetail.Builder | |
| CpeDeviceShapeSummary |
A summary of information about a particular CPE device type.
|
| CpeDeviceShapeSummary.Builder | |
| CreateAppCatalogSubscriptionDetails |
details for creating a subscription for a listing resource version.
|
| CreateAppCatalogSubscriptionDetails.Builder | |
| CreateBootVolumeBackupDetails |
Note: Objects should always be created or deserialized using the CreateBootVolumeBackupDetails.Builder. |
| CreateBootVolumeBackupDetails.Builder | |
| CreateBootVolumeDetails |
Note: Objects should always be created or deserialized using the CreateBootVolumeDetails.Builder. |
| CreateBootVolumeDetails.Builder | |
| CreateByoipRangeDetails |
The information used to create a
ByoipRange resource. |
| CreateByoipRangeDetails.Builder | |
| CreateCapacityReportShapeAvailabilityDetails |
Information about the shapes in a capacity report.
|
| CreateCapacityReportShapeAvailabilityDetails.Builder | |
| CreateCapacitySourceDetails |
A capacity source of bare metal hosts.
|
| CreateCaptureFilterDetails |
A capture filter contains a set of rules governing what traffic a VTAP mirrors or a VCN flow log
collects.
|
| CreateCaptureFilterDetails.Builder | |
| CreateClusterNetworkDetails |
The data to create a cluster network with instance
pools.
|
| CreateClusterNetworkDetails.Builder | |
| CreateClusterNetworkInstancePoolDetails |
The data to create an instance pool in a cluster network.
|
| CreateClusterNetworkInstancePoolDetails.Builder | |
| CreateComputeCapacityReportDetails |
The data to create a report of available Compute capacity.
|
| CreateComputeCapacityReportDetails.Builder | |
| CreateComputeCapacityReservationDetails |
The details for creating a new compute capacity reservation.
|
| CreateComputeCapacityReservationDetails.Builder | |
| CreateComputeCapacityTopologyDetails |
The details for creating a new compute capacity topology.
|
| CreateComputeCapacityTopologyDetails.Builder | |
| CreateComputeClusterDetails |
The data for creating a compute
cluster.
|
| CreateComputeClusterDetails.Builder | |
| CreateComputeImageCapabilitySchemaDetails |
Create Image Capability Schema for an image.
|
| CreateComputeImageCapabilitySchemaDetails.Builder | |
| CreateCpeDetails |
Note: Objects should always be created or deserialized using the CreateCpeDetails.Builder. |
| CreateCpeDetails.Builder | |
| CreateCrossConnectDetails |
Note: Objects should always be created or deserialized using the CreateCrossConnectDetails.Builder. |
| CreateCrossConnectDetails.Builder | |
| CreateCrossConnectGroupDetails |
Note: Objects should always be created or deserialized using the CreateCrossConnectGroupDetails.Builder. |
| CreateCrossConnectGroupDetails.Builder | |
| CreateDedicatedCapacitySourceDetails |
A capacity source of bare metal hosts that is dedicated to a customer.
|
| CreateDedicatedCapacitySourceDetails.Builder | |
| CreateDedicatedVmHostDetails |
The details for creating a new dedicated virtual machine host.
|
| CreateDedicatedVmHostDetails.Builder | |
| CreateDhcpDetails |
Note: Objects should always be created or deserialized using the CreateDhcpDetails.Builder. |
| CreateDhcpDetails.Builder | |
| CreateDrgAttachmentDetails |
Note: Objects should always be created or deserialized using the CreateDrgAttachmentDetails.Builder. |
| CreateDrgAttachmentDetails.Builder | |
| CreateDrgDetails |
Note: Objects should always be created or deserialized using the CreateDrgDetails.Builder. |
| CreateDrgDetails.Builder | |
| CreateDrgRouteDistributionDetails |
Details used to create a route distribution.
|
| CreateDrgRouteDistributionDetails.Builder | |
| CreateDrgRouteTableDetails |
Details used in a request to create a DRG route table.
|
| CreateDrgRouteTableDetails.Builder | |
| CreateImageDetails |
Either instanceId or imageSourceDetails must be provided in addition to other required
parameters.
|
| CreateImageDetails.Builder | |
| CreateInstanceConfigurationBase |
Creation details for an instance configuration.
|
| CreateInstanceConfigurationDetails |
Details for creating an instance configuration by providing a list of configuration settings.
|
| CreateInstanceConfigurationDetails.Builder | |
| CreateInstanceConfigurationFromInstanceDetails |
Details for creating an instance configuration using an existing instance as a template.
|
| CreateInstanceConfigurationFromInstanceDetails.Builder | |
| CreateInstanceConsoleConnectionDetails |
The details for creating a instance console connection.
|
| CreateInstanceConsoleConnectionDetails.Builder | |
| CreateInstancePoolDetails |
The data to create an instance pool.
|
| CreateInstancePoolDetails.Builder | |
| CreateInstancePoolPlacementConfigurationDetails |
The location for where an instance pool will place instances.
|
| CreateInstancePoolPlacementConfigurationDetails.Builder | |
| CreateInternetGatewayDetails |
Note: Objects should always be created or deserialized using the CreateInternetGatewayDetails.Builder. |
| CreateInternetGatewayDetails.Builder | |
| CreateIPSecConnectionDetails |
Note: Objects should always be created or deserialized using the CreateIPSecConnectionDetails.Builder. |
| CreateIPSecConnectionDetails.Builder | |
| CreateIPSecConnectionTunnelDetails |
Note: Objects should always be created or deserialized using the CreateIPSecConnectionTunnelDetails.Builder. |
| CreateIPSecConnectionTunnelDetails.Builder | |
| CreateIPSecTunnelBgpSessionDetails |
Note: Objects should always be created or deserialized using the CreateIPSecTunnelBgpSessionDetails.Builder. |
| CreateIPSecTunnelBgpSessionDetails.Builder | |
| CreateIPSecTunnelEncryptionDomainDetails |
Request to enable a multi-encryption domain policy on the IPSec tunnel.
|
| CreateIPSecTunnelEncryptionDomainDetails.Builder | |
| CreateIpv6Details |
Note: Objects should always be created or deserialized using the CreateIpv6Details.Builder. |
| CreateIpv6Details.Builder | |
| CreateLocalPeeringGatewayDetails |
Note: Objects should always be created or deserialized using the CreateLocalPeeringGatewayDetails.Builder. |
| CreateLocalPeeringGatewayDetails.Builder | |
| CreateMacsecKey |
Defines the secret
OCIDs held in
Vault that represent the MACsec key.
|
| CreateMacsecKey.Builder | |
| CreateMacsecProperties |
Properties used to configure MACsec (if capable).
|
| CreateMacsecProperties.Builder | |
| CreateNatGatewayDetails |
Note: Objects should always be created or deserialized using the CreateNatGatewayDetails.Builder. |
| CreateNatGatewayDetails.Builder | |
| CreateNetworkSecurityGroupDetails |
Note: Objects should always be created or deserialized using the CreateNetworkSecurityGroupDetails.Builder. |
| CreateNetworkSecurityGroupDetails.Builder | |
| CreatePrivateIpDetails |
Note: Objects should always be created or deserialized using the CreatePrivateIpDetails.Builder. |
| CreatePrivateIpDetails.Builder | |
| CreatePublicIpDetails |
Note: Objects should always be created or deserialized using the CreatePublicIpDetails.Builder. |
| CreatePublicIpDetails.Builder | |
| CreatePublicIpPoolDetails |
The information used to create a public IP pool.
|
| CreatePublicIpPoolDetails.Builder | |
| CreateRemotePeeringConnectionDetails |
Note: Objects should always be created or deserialized using the CreateRemotePeeringConnectionDetails.Builder. |
| CreateRemotePeeringConnectionDetails.Builder | |
| CreateRouteTableDetails |
Note: Objects should always be created or deserialized using the CreateRouteTableDetails.Builder. |
| CreateRouteTableDetails.Builder | |
| CreateSecurityListDetails |
Note: Objects should always be created or deserialized using the CreateSecurityListDetails.Builder. |
| CreateSecurityListDetails.Builder | |
| CreateServiceGatewayDetails |
Note: Objects should always be created or deserialized using the CreateServiceGatewayDetails.Builder. |
| CreateServiceGatewayDetails.Builder | |
| CreateSubnetDetails |
Note: Objects should always be created or deserialized using the CreateSubnetDetails.Builder. |
| CreateSubnetDetails.Builder | |
| CreateVcnDetails |
Note: Objects should always be created or deserialized using the CreateVcnDetails.Builder. |
| CreateVcnDetails.Builder | |
| CreateVirtualCircuitDetails |
Note: Objects should always be created or deserialized using the CreateVirtualCircuitDetails.Builder. |
| CreateVirtualCircuitDetails.Builder | |
| CreateVirtualCircuitPublicPrefixDetails |
Note: Objects should always be created or deserialized using the CreateVirtualCircuitPublicPrefixDetails.Builder. |
| CreateVirtualCircuitPublicPrefixDetails.Builder | |
| CreateVlanDetails |
Note: Objects should always be created or deserialized using the CreateVlanDetails.Builder. |
| CreateVlanDetails.Builder | |
| CreateVnicDetails |
Contains properties for a VNIC.
|
| CreateVnicDetails.Builder | |
| CreateVolumeBackupDetails |
Note: Objects should always be created or deserialized using the CreateVolumeBackupDetails.Builder. |
| CreateVolumeBackupDetails.Builder | |
| CreateVolumeBackupPolicyAssignmentDetails |
Note: Objects should always be created or deserialized using the CreateVolumeBackupPolicyAssignmentDetails.Builder. |
| CreateVolumeBackupPolicyAssignmentDetails.Builder | |
| CreateVolumeBackupPolicyDetails |
Specifies the properties for creating user defined backup policy.
|
| CreateVolumeBackupPolicyDetails.Builder | |
| CreateVolumeDetails |
The details of the volume to create.
|
| CreateVolumeDetails.Builder | |
| CreateVolumeGroupBackupDetails |
Note: Objects should always be created or deserialized using the CreateVolumeGroupBackupDetails.Builder. |
| CreateVolumeGroupBackupDetails.Builder | |
| CreateVolumeGroupDetails |
Note: Objects should always be created or deserialized using the CreateVolumeGroupDetails.Builder. |
| CreateVolumeGroupDetails.Builder | |
| CreateVtapDetails |
These details are included in a request to create a virtual test access point (VTAP).
|
| CreateVtapDetails.Builder | |
| CrossConnect |
For use with Oracle Cloud Infrastructure FastConnect.
|
| CrossConnect.Builder | |
| CrossConnectGroup |
For use with Oracle Cloud Infrastructure FastConnect.
|
| CrossConnectGroup.Builder | |
| CrossConnectLocation |
An individual FastConnect location.
|
| CrossConnectLocation.Builder | |
| CrossConnectMapping |
For use with Oracle Cloud Infrastructure FastConnect.
|
| CrossConnectMapping.Builder | |
| CrossConnectMappingDetails |
For use with Oracle Cloud Infrastructure FastConnect.
|
| CrossConnectMappingDetails.Builder | |
| CrossConnectMappingDetailsCollection |
An array of CrossConnectMappingDetails
Note: Objects should always be created or deserialized using the CrossConnectMappingDetailsCollection.Builder. |
| CrossConnectMappingDetailsCollection.Builder | |
| CrossConnectPortSpeedShape |
An individual port speed level for cross-connects.
|
| CrossConnectPortSpeedShape.Builder | |
| CrossConnectStatus |
The status of the cross-connect.
|
| CrossConnectStatus.Builder | |
| DedicatedCapacitySource |
A capacity source of bare metal hosts that is dedicated to a user.
|
| DedicatedCapacitySource.Builder | |
| DedicatedVmHost |
A dedicated virtual machine host lets you host multiple VM instances on a dedicated server that
is not shared with other tenancies.
|
| DedicatedVmHost.Builder | |
| DedicatedVmHostInstanceShapeSummary |
The shape used to launch instances associated with the dedicated VM host.
|
| DedicatedVmHostInstanceShapeSummary.Builder | |
| DedicatedVmHostInstanceSummary |
Condensed instance data when listing instances on a dedicated VM host.
|
| DedicatedVmHostInstanceSummary.Builder | |
| DedicatedVmHostShapeSummary |
The shape used to launch the dedicated virtual machine (VM) host.
|
| DedicatedVmHostShapeSummary.Builder | |
| DedicatedVmHostSummary |
A dedicated virtual machine (VM) host lets you host multiple instances on a dedicated server that
is not shared with other tenancies.
|
| DedicatedVmHostSummary.Builder | |
| DefaultDrgRouteTables |
The default DRG route table for this DRG.
|
| DefaultDrgRouteTables.Builder | |
| DefaultPhaseOneParameters |
Default phase one parameters.
|
| DefaultPhaseOneParameters.Builder | |
| DefaultPhaseTwoParameters |
Default phase two parameters.
|
| DefaultPhaseTwoParameters.Builder | |
| DeleteVirtualCircuitPublicPrefixDetails |
Note: Objects should always be created or deserialized using the DeleteVirtualCircuitPublicPrefixDetails.Builder. |
| DeleteVirtualCircuitPublicPrefixDetails.Builder | |
| DetachedVolumeAutotunePolicy |
Volume’s performace will be tuned to the lower cost settings once detached.
|
| DetachedVolumeAutotunePolicy.Builder | |
| DetachInstancePoolInstanceDetails |
An instance that is to be detached from an instance pool.
|
| DetachInstancePoolInstanceDetails.Builder | |
| DetachLoadBalancerDetails |
Represents a load balancer that is to be detached from an instance pool.
|
| DetachLoadBalancerDetails.Builder | |
| Device |
Device Path corresponding to the block devices attached to instances having a name and
isAvailable flag.
|
| Device.Builder | |
| DhcpDnsOption |
DHCP option for specifying how DNS (hostname resolution) is handled in the subnets in the VCN.
|
| DhcpDnsOption.Builder | |
| DhcpOption |
A single DHCP option according to RFC 1533.
|
| DhcpOptions |
A set of DHCP options.
|
| DhcpOptions.Builder | |
| DhcpSearchDomainOption |
DHCP option for specifying a search domain name for DNS queries.
|
| DhcpSearchDomainOption.Builder | |
| DpdConfig |
These configuration details are used for dead peer detection (DPD).
|
| DpdConfig.Builder | |
| Drg |
A dynamic routing gateway (DRG) is a virtual router that provides a path for private network
traffic between networks.
|
| Drg.Builder | |
| DrgAttachment |
A DRG attachment serves as a link between a DRG and a network resource.
|
| DrgAttachment.Builder | |
| DrgAttachmentIdDrgRouteDistributionMatchCriteria |
The criteria by which a specific attachment will import routes to the DRG.
|
| DrgAttachmentIdDrgRouteDistributionMatchCriteria.Builder | |
| DrgAttachmentInfo |
The
DrgAttachmentInfo resource contains the
OCID of the DRG
attachment. |
| DrgAttachmentInfo.Builder | |
| DrgAttachmentMatchAllDrgRouteDistributionMatchCriteria |
All routes are imported or exported.
|
| DrgAttachmentMatchAllDrgRouteDistributionMatchCriteria.Builder | |
| DrgAttachmentNetworkCreateDetails |
Note: Objects should always be created or deserialized using the Builder. |
| DrgAttachmentNetworkDetails |
Note: Objects should always be created or deserialized using the Builder. |
| DrgAttachmentNetworkUpdateDetails |
Note: Objects should always be created or deserialized using the Builder. |
| DrgAttachmentTypeDrgRouteDistributionMatchCriteria |
The attachment type from which the DRG will import routes.
|
| DrgAttachmentTypeDrgRouteDistributionMatchCriteria.Builder | |
| DrgRedundancyStatus |
The redundancy status of the DRG.
|
| DrgRedundancyStatus.Builder | |
| DrgRouteDistribution |
A route distribution establishes how routes get imported into DRG route tables and exported
through the DRG attachments.
|
| DrgRouteDistribution.Builder | |
| DrgRouteDistributionMatchCriteria |
The match criteria in a route distribution statement.
|
| DrgRouteDistributionStatement |
A single statement within a route distribution.
|
| DrgRouteDistributionStatement.Builder | |
| DrgRouteRule |
A DRG route rule is a mapping between a destination IP address range and a DRG attachment.
|
| DrgRouteRule.Builder | |
| DrgRouteTable |
All routing inside the DRG is driven by the contents of DRG route tables.
|
| DrgRouteTable.Builder | |
| EgressSecurityRule |
A rule for allowing outbound IP packets.
|
| EgressSecurityRule.Builder | |
| EmulatedVolumeAttachment |
An Emulated volume attachment.
|
| EmulatedVolumeAttachment.Builder | |
| EncryptionDomainConfig |
Configuration information used by the encryption domain policy.
|
| EncryptionDomainConfig.Builder | |
| EnumIntegerImageCapabilityDescriptor |
Enum Integer type CapabilityDescriptor
Note: Objects should always be created or deserialized using the EnumIntegerImageCapabilityDescriptor.Builder. |
| EnumIntegerImageCapabilityDescriptor.Builder | |
| EnumStringImageCapabilitySchemaDescriptor |
Enum String type of ImageCapabilitySchemaDescriptor
Note: Objects should always be created or deserialized using the EnumStringImageCapabilitySchemaDescriptor.Builder. |
| EnumStringImageCapabilitySchemaDescriptor.Builder | |
| ExportImageDetails |
The destination details for the image export.
|
| ExportImageViaObjectStorageTupleDetails |
Note: Objects should always be created or deserialized using the ExportImageViaObjectStorageTupleDetails.Builder. |
| ExportImageViaObjectStorageTupleDetails.Builder | |
| ExportImageViaObjectStorageUriDetails |
Note: Objects should always be created or deserialized using the ExportImageViaObjectStorageUriDetails.Builder. |
| ExportImageViaObjectStorageUriDetails.Builder | |
| FastConnectProviderService |
A service offering from a supported provider.
|
| FastConnectProviderService.Builder | |
| FastConnectProviderServiceKey |
A provider service key and its details.
|
| FastConnectProviderServiceKey.Builder | |
| FlowLogCaptureFilterRuleDetails |
The set of rules governing what traffic the VCN flow log collects.
|
| FlowLogCaptureFilterRuleDetails.Builder | |
| GenericBmLaunchInstancePlatformConfig |
The standard platform configuration to be used when launching a bare metal instance.
|
| GenericBmLaunchInstancePlatformConfig.Builder | |
| GenericBmPlatformConfig |
The standard platform configuration of a bare metal instance.
|
| GenericBmPlatformConfig.Builder | |
| GetIpInventoryVcnOverlapDetails |
Lists the compartment to find VCN overlap.
|
| GetIpInventoryVcnOverlapDetails.Builder | |
| GetPublicIpByIpAddressDetails |
IP address of the public IP.
|
| GetPublicIpByIpAddressDetails.Builder | |
| GetPublicIpByPrivateIpIdDetails |
Details of the private IP that the public IP is assigned to.
|
| GetPublicIpByPrivateIpIdDetails.Builder | |
| IcmpOptions |
Optional and valid only for ICMP and ICMPv6.
|
| IcmpOptions.Builder | |
| Image |
A boot disk image for launching an instance.
|
| Image.Builder | |
| ImageCapabilitySchemaDescriptor |
Image Capability Schema Descriptor is a type of capability for an image.
|
| ImageMemoryConstraints |
For a flexible image and shape, the amount of memory supported for instances that use this image.
|
| ImageMemoryConstraints.Builder | |
| ImageOcpuConstraints |
OCPU options for an image and shape.
|
| ImageOcpuConstraints.Builder | |
| ImageShapeCompatibilityEntry |
An image and shape that are compatible.
|
| ImageShapeCompatibilityEntry.Builder | |
| ImageShapeCompatibilitySummary |
Summary information for a compatible image and shape.
|
| ImageShapeCompatibilitySummary.Builder | |
| ImageSourceDetails |
Note: Objects should always be created or deserialized using the Builder. |
| ImageSourceViaObjectStorageTupleDetails |
Note: Objects should always be created or deserialized using the ImageSourceViaObjectStorageTupleDetails.Builder. |
| ImageSourceViaObjectStorageTupleDetails.Builder | |
| ImageSourceViaObjectStorageUriDetails |
Note: Objects should always be created or deserialized using the ImageSourceViaObjectStorageUriDetails.Builder. |
| ImageSourceViaObjectStorageUriDetails.Builder | |
| IngressSecurityRule |
A rule for allowing inbound IP packets.
|
| IngressSecurityRule.Builder | |
| Instance |
A compute host.
|
| Instance.Builder | |
| InstanceAgentConfig |
Configuration options for the Oracle Cloud Agent software running on the instance.
|
| InstanceAgentConfig.Builder | |
| InstanceAgentFeatures |
Oracle Cloud Agent features supported on the image.
|
| InstanceAgentFeatures.Builder | |
| InstanceAgentPluginConfigDetails |
The configuration of plugins associated with this instance.
|
| InstanceAgentPluginConfigDetails.Builder | |
| InstanceAvailabilityConfig |
Options for defining the availabiity of a VM instance after a maintenance event that impacts the
underlying hardware.
|
| InstanceAvailabilityConfig.Builder | |
| InstanceConfiguration |
An instance configuration is a template that defines the settings to use when creating Compute
instances.
|
| InstanceConfiguration.Builder | |
| InstanceConfigurationAmdMilanBmGpuLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal GPU instance with the following
shape: BM.GPU.GM4.8 (also named BM.GPU.A100-v2.8) (the AMD Milan platform).
|
| InstanceConfigurationAmdMilanBmGpuLaunchInstancePlatformConfig.Builder | |
| InstanceConfigurationAmdMilanBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with one of the following
shapes: BM.Standard.E4.128 or BM.DenseIO.E4.128 (the AMD Milan platform).
|
| InstanceConfigurationAmdMilanBmLaunchInstancePlatformConfig.Builder | |
| InstanceConfigurationAmdRomeBmGpuLaunchInstancePlatformConfig |
The platform configuration of a bare metal GPU instance that uses the BM.GPU4.8 shape (the AMD
Rome platform).
|
| InstanceConfigurationAmdRomeBmGpuLaunchInstancePlatformConfig.Builder | |
| InstanceConfigurationAmdRomeBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with the BM.Standard.E3.128
shape (the AMD Rome platform).
|
| InstanceConfigurationAmdRomeBmLaunchInstancePlatformConfig.Builder | |
| InstanceConfigurationAmdVmLaunchInstancePlatformConfig |
The platform configuration used when launching a virtual machine instance with the AMD platform.
|
| InstanceConfigurationAmdVmLaunchInstancePlatformConfig.Builder | |
| InstanceConfigurationAttachVnicDetails |
Note: Objects should always be created or deserialized using the InstanceConfigurationAttachVnicDetails.Builder. |
| InstanceConfigurationAttachVnicDetails.Builder | |
| InstanceConfigurationAttachVolumeDetails |
Volume attachmentDetails.
|
| InstanceConfigurationAutotunePolicy |
An autotune policy automatically tunes the volume’s performace based on the type of the policy.
|
| InstanceConfigurationAvailabilityConfig |
Options for defining the availabiity of a VM instance after a maintenance event that impacts the
underlying hardware.
|
| InstanceConfigurationAvailabilityConfig.Builder | |
| InstanceConfigurationBlockVolumeDetails |
Create new block volumes or attach to an existing volume.
|
| InstanceConfigurationBlockVolumeDetails.Builder | |
| InstanceConfigurationBlockVolumeReplicaDetails |
Contains the details for the block volume replica
Note: Objects should always be created or deserialized using the InstanceConfigurationBlockVolumeReplicaDetails.Builder. |
| InstanceConfigurationBlockVolumeReplicaDetails.Builder | |
| InstanceConfigurationCreateVnicDetails |
Contains the properties of the VNIC for an instance configuration.
|
| InstanceConfigurationCreateVnicDetails.Builder | |
| InstanceConfigurationCreateVolumeDetails |
Creates a new block volume.
|
| InstanceConfigurationCreateVolumeDetails.Builder | |
| InstanceConfigurationDetachedVolumeAutotunePolicy |
Volume’s performace will be tuned to the lower cost settings once detached.
|
| InstanceConfigurationDetachedVolumeAutotunePolicy.Builder | |
| InstanceConfigurationGenericBmLaunchInstancePlatformConfig |
The standard platform configuration to be used when launching a bare metal instance.
|
| InstanceConfigurationGenericBmLaunchInstancePlatformConfig.Builder | |
| InstanceConfigurationInstanceDetails |
Note: Objects should always be created or deserialized using the Builder. |
| InstanceConfigurationInstanceOptions |
Optional mutable instance options.
|
| InstanceConfigurationInstanceOptions.Builder | |
| InstanceConfigurationInstanceSourceDetails |
Note: Objects should always be created or deserialized using the Builder. |
| InstanceConfigurationInstanceSourceImageFilterDetails |
These are the criteria for selecting an image.
|
| InstanceConfigurationInstanceSourceImageFilterDetails.Builder | |
| InstanceConfigurationInstanceSourceViaBootVolumeDetails |
Note: Objects should always be created or deserialized using the InstanceConfigurationInstanceSourceViaBootVolumeDetails.Builder. |
| InstanceConfigurationInstanceSourceViaBootVolumeDetails.Builder | |
| InstanceConfigurationInstanceSourceViaImageDetails |
Note: Objects should always be created or deserialized using the InstanceConfigurationInstanceSourceViaImageDetails.Builder. |
| InstanceConfigurationInstanceSourceViaImageDetails.Builder | |
| InstanceConfigurationIntelIcelakeBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with the BM.Standard3.64
shape or the BM.Optimized3.36 shape (the Intel Ice Lake platform).
|
| InstanceConfigurationIntelIcelakeBmLaunchInstancePlatformConfig.Builder | |
| InstanceConfigurationIntelSkylakeBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with one of the following
shapes: BM.Standard2.52, BM.GPU2.2, BM.GPU3.8, or BM.DenseIO2.52 (the Intel Skylake platform).
|
| InstanceConfigurationIntelSkylakeBmLaunchInstancePlatformConfig.Builder | |
| InstanceConfigurationIntelVmLaunchInstancePlatformConfig |
The platform configuration used when launching a virtual machine instance with the Intel
platform.
|
| InstanceConfigurationIntelVmLaunchInstancePlatformConfig.Builder | |
| InstanceConfigurationIpv6AddressIpv6SubnetCidrPairDetails |
Optional.
|
| InstanceConfigurationIpv6AddressIpv6SubnetCidrPairDetails.Builder | |
| InstanceConfigurationIscsiAttachVolumeDetails |
Note: Objects should always be created or deserialized using the InstanceConfigurationIscsiAttachVolumeDetails.Builder. |
| InstanceConfigurationIscsiAttachVolumeDetails.Builder | |
| InstanceConfigurationLaunchInstanceAgentConfigDetails |
Configuration options for the Oracle Cloud Agent software running on the instance.
|
| InstanceConfigurationLaunchInstanceAgentConfigDetails.Builder | |
| InstanceConfigurationLaunchInstanceDetails |
Instance launch details for creating an instance from an instance configuration.
|
| InstanceConfigurationLaunchInstanceDetails.Builder | |
| InstanceConfigurationLaunchInstancePlatformConfig |
The platform configuration requested for the instance.
|
| InstanceConfigurationLaunchInstanceShapeConfigDetails |
The shape configuration requested for the instance.
|
| InstanceConfigurationLaunchInstanceShapeConfigDetails.Builder | |
| InstanceConfigurationLaunchOptions |
Options for tuning the compatibility and performance of VM shapes.
|
| InstanceConfigurationLaunchOptions.Builder | |
| InstanceConfigurationParavirtualizedAttachVolumeDetails |
Note: Objects should always be created or deserialized using the InstanceConfigurationParavirtualizedAttachVolumeDetails.Builder. |
| InstanceConfigurationParavirtualizedAttachVolumeDetails.Builder | |
| InstanceConfigurationPerformanceBasedAutotunePolicy |
If a volume is being throttled at the current setting for a certain period of time, auto-tune
will gradually increase the volume’s performance limited up to Maximum VPUs/GB.
|
| InstanceConfigurationPerformanceBasedAutotunePolicy.Builder | |
| InstanceConfigurationSummary |
Summary information for an instance configuration.
|
| InstanceConfigurationSummary.Builder | |
| InstanceConfigurationVolumeSourceDetails |
Note: Objects should always be created or deserialized using the Builder. |
| InstanceConfigurationVolumeSourceFromVolumeBackupDetails |
Specifies the volume backup.
|
| InstanceConfigurationVolumeSourceFromVolumeBackupDetails.Builder | |
| InstanceConfigurationVolumeSourceFromVolumeDetails |
Specifies the source volume.
|
| InstanceConfigurationVolumeSourceFromVolumeDetails.Builder | |
| InstanceConsoleConnection |
The
InstanceConsoleConnection API provides you with console access to Compute instances,
enabling you to troubleshoot malfunctioning instances remotely. |
| InstanceConsoleConnection.Builder | |
| InstanceCredentials |
The credentials for a particular instance.
|
| InstanceCredentials.Builder | |
| InstanceMaintenanceEvent |
It is the event in which the maintenance action will be be performed on the customer instance on
the scheduled date and time.
|
| InstanceMaintenanceEvent.Builder | |
| InstanceMaintenanceEventSummary |
It is the event in which the maintenance action will be be performed on the customer instance on
the scheduled date and time.
|
| InstanceMaintenanceEventSummary.Builder | |
| InstanceMaintenanceReboot |
The maximum possible date and time that a maintenance reboot can be extended.
|
| InstanceMaintenanceReboot.Builder | |
| InstanceOptions |
Optional mutable instance options
Note: Objects should always be created or deserialized using the InstanceOptions.Builder. |
| InstanceOptions.Builder | |
| InstancePool |
An instance pool is a set of instances within the same region that are managed as a group.
|
| InstancePool.Builder | |
| InstancePoolInstance |
Information about an instance that belongs to an instance pool.
|
| InstancePoolInstance.Builder | |
| InstancePoolInstanceLoadBalancerBackend |
Represents the load balancer Backend that is configured for an instance pool instance.
|
| InstancePoolInstanceLoadBalancerBackend.Builder | |
| InstancePoolLoadBalancerAttachment |
Represents a load balancer that is attached to an instance pool.
|
| InstancePoolLoadBalancerAttachment.Builder | |
| InstancePoolPlacementConfiguration |
The location for where an instance pool will place instances.
|
| InstancePoolPlacementConfiguration.Builder | |
| InstancePoolPlacementIpv6AddressIpv6SubnetCidrDetails |
Optional.
|
| InstancePoolPlacementIpv6AddressIpv6SubnetCidrDetails.Builder | |
| InstancePoolPlacementPrimarySubnet |
Details about the IPv6 primary subnet.
|
| InstancePoolPlacementPrimarySubnet.Builder | |
| InstancePoolPlacementSecondaryVnicSubnet |
The secondary VNIC object for the placement configuration for an instance pool.
|
| InstancePoolPlacementSecondaryVnicSubnet.Builder | |
| InstancePoolPlacementSubnetDetails |
Base details about the IPv6 subnet.
|
| InstancePoolPlacementSubnetDetails.Builder | |
| InstancePoolSummary |
Summary information for an instance pool.
|
| InstancePoolSummary.Builder | |
| InstancePowerActionDetails |
A base object for all types of instance power action requests.
|
| InstanceReservationConfig |
Data that defines the capacity configuration.
|
| InstanceReservationConfig.Builder | |
| InstanceReservationConfigDetails |
A template that contains the settings to use when defining the instance capacity configuration.
|
| InstanceReservationConfigDetails.Builder | |
| InstanceReservationShapeConfigDetails |
The shape configuration requested when launching instances in a compute capacity reservation.
|
| InstanceReservationShapeConfigDetails.Builder | |
| InstanceShapeConfig |
The shape configuration for an instance.
|
| InstanceShapeConfig.Builder | |
| InstanceSourceDetails |
Note: Objects should always be created or deserialized using the Builder. |
| InstanceSourceImageFilterDetails |
These are the criteria for selecting an image.
|
| InstanceSourceImageFilterDetails.Builder | |
| InstanceSourceViaBootVolumeDetails |
Note: Objects should always be created or deserialized using the InstanceSourceViaBootVolumeDetails.Builder. |
| InstanceSourceViaBootVolumeDetails.Builder | |
| InstanceSourceViaImageDetails |
Note: Objects should always be created or deserialized using the InstanceSourceViaImageDetails.Builder. |
| InstanceSourceViaImageDetails.Builder | |
| InstanceSummary |
Condensed instance data when listing instances in an instance pool.
|
| InstanceSummary.Builder | |
| IntelIcelakeBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with the BM.Standard3.64
shape or the BM.Optimized3.36 shape (the Intel Ice Lake platform).
|
| IntelIcelakeBmLaunchInstancePlatformConfig.Builder | |
| IntelIcelakeBmPlatformConfig |
The platform configuration of a bare metal instance that uses the BM.Standard3.64 shape or the
BM.Optimized3.36 shape (the Intel Ice Lake platform).
|
| IntelIcelakeBmPlatformConfig.Builder | |
| IntelSkylakeBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with an Intel X7-based
processor (the Intel Skylake platform).
|
| IntelSkylakeBmLaunchInstancePlatformConfig.Builder | |
| IntelSkylakeBmPlatformConfig |
The platform configuration of a bare metal instance that uses one of the following shapes:
BM.Standard2.52, BM.GPU2.2, BM.GPU3.8, or BM.DenseIO2.52 (the Intel Skylake platform).
|
| IntelSkylakeBmPlatformConfig.Builder | |
| IntelVmLaunchInstancePlatformConfig |
The platform configuration used when launching a virtual machine instance with the Intel
platform.
|
| IntelVmLaunchInstancePlatformConfig.Builder | |
| IntelVmPlatformConfig |
The platform configuration of a virtual machine instance that uses the Intel platform.
|
| IntelVmPlatformConfig.Builder | |
| IntelVmUpdateInstancePlatformConfig |
The platform configuration used when updating a virtual machine instance with the Intel platform.
|
| IntelVmUpdateInstancePlatformConfig.Builder | |
| InternetGateway |
Represents a router that connects the edge of a VCN with the Internet.
|
| InternetGateway.Builder | |
| InventoryIpAddressSummary |
Provides the IP address and its corresponding VNIC ID, VNIC name, and DNS hostname.
|
| InventoryIpAddressSummary.Builder | |
| InventoryResourceSummary |
Lists resources and its properties under a given subnet.
|
| InventoryResourceSummary.Builder | |
| InventorySubnetCidrBlockSummary |
Lists CIDRs and utilization within a subnet.
|
| InventorySubnetCidrBlockSummary.Builder | |
| InventorySubnetSummary |
Lists subnet and its associated resources.
|
| InventorySubnetSummary.Builder | |
| InventoryVcnCidrBlockSummary |
Lists the CIDRs and utilization within a VCN.
|
| InventoryVcnCidrBlockSummary.Builder | |
| InventoryVcnSummary |
Provides the summary of a VCN’s IP Inventory data under specified compartments.
|
| InventoryVcnSummary.Builder | |
| Ipam |
An IPAM refers to a group of VCNs, subnets, IP resources and its related properties.
|
| Ipam.Builder | |
| IpInventoryCidrUtilizationCollection |
The IP Inventory CIDR utilization details of a subnet.
|
| IpInventoryCidrUtilizationCollection.Builder | |
| IpInventoryCidrUtilizationSummary |
The CIDR utilization details of a subnet.
|
| IpInventoryCidrUtilizationSummary.Builder | |
| IpInventoryCollection |
The results returned by a
ListIpInventory operation. |
| IpInventoryCollection.Builder | |
| IpInventorySubnetResourceCollection |
The results returned by a
ListIpInventorySubnet operation. |
| IpInventorySubnetResourceCollection.Builder | |
| IpInventorySubnetResourceSummary |
Provides the IP Inventory details of a subnet and its associated resources.
|
| IpInventorySubnetResourceSummary.Builder | |
| IpInventoryVcnOverlapCollection |
The details of the overlapping VCNs and compartments.
|
| IpInventoryVcnOverlapCollection.Builder | |
| IpInventoryVcnOverlapSummary |
Provides the VCN overlap details.
|
| IpInventoryVcnOverlapSummary.Builder | |
| IPSecConnection |
A connection between a DRG and CPE.
|
| IPSecConnection.Builder | |
| IPSecConnectionDeviceConfig |
Deprecated.
|
| IPSecConnectionDeviceConfig.Builder | |
| IPSecConnectionDeviceStatus |
Deprecated.
|
| IPSecConnectionDeviceStatus.Builder | |
| IPSecConnectionTunnel |
Information about a single IPSec tunnel in an IPSec connection.
|
| IPSecConnectionTunnel.Builder | |
| IPSecConnectionTunnelErrorDetails |
Details for an error on an IPSec tunnel.
|
| IPSecConnectionTunnelErrorDetails.Builder | |
| IPSecConnectionTunnelSharedSecret |
The tunnel’s shared secret (pre-shared key).
|
| IPSecConnectionTunnelSharedSecret.Builder | |
| IpsecTunnelDrgAttachmentNetworkDetails |
Specifies the IPSec tunnel attached to the DRG.
|
| IpsecTunnelDrgAttachmentNetworkDetails.Builder | |
| Ipv6 |
An IPv6 is a conceptual term that refers to an IPv6 address and related properties.
|
| Ipv6.Builder | |
| Ipv6AddressIpv6SubnetCidrPairDetails |
Details to assign an IPv6 subnet prefix and IPv6 address on VNIC creation.
|
| Ipv6AddressIpv6SubnetCidrPairDetails.Builder | |
| IScsiVolumeAttachment |
An ISCSI volume attachment.
|
| IScsiVolumeAttachment.Builder | |
| LaunchAttachIScsiVolumeDetails |
Details specific to ISCSI type volume attachments.
|
| LaunchAttachIScsiVolumeDetails.Builder | |
| LaunchAttachParavirtualizedVolumeDetails |
Details specific to PV type volume attachments.
|
| LaunchAttachParavirtualizedVolumeDetails.Builder | |
| LaunchAttachVolumeDetails |
The details of the volume to attach.
|
| LaunchCreateVolumeDetails |
Define a volume that will be created and attached or attached to an instance on creation.
|
| LaunchCreateVolumeFromAttributes |
The details of the volume to create for CreateVolume operation.
|
| LaunchCreateVolumeFromAttributes.Builder | |
| LaunchInstanceAgentConfigDetails |
Configuration options for the Oracle Cloud Agent software running on the instance.
|
| LaunchInstanceAgentConfigDetails.Builder | |
| LaunchInstanceAvailabilityConfigDetails |
Options for VM migration during infrastructure maintenance events and for defining the
availability of a VM instance after a maintenance event that impacts the underlying hardware.
|
| LaunchInstanceAvailabilityConfigDetails.Builder | |
| LaunchInstanceDetails |
Instance launch details.
|
| LaunchInstanceDetails.Builder | |
| LaunchInstancePlatformConfig |
The platform configuration requested for the instance.
|
| LaunchInstanceShapeConfigDetails |
The shape configuration requested for the instance.
|
| LaunchInstanceShapeConfigDetails.Builder | |
| LaunchOptions |
Options for tuning the compatibility and performance of VM shapes.
|
| LaunchOptions.Builder | |
| LetterOfAuthority |
The Letter of Authority for the cross-connect.
|
| LetterOfAuthority.Builder | |
| ListIpInventoryDetails |
Required input parameters for retrieving IP Inventory data within the specified compartments of a
region.
|
| ListIpInventoryDetails.Builder | |
| LocalPeeringGateway |
A local peering gateway (LPG) is an object on a VCN that lets that VCN peer with another VCN in
the same region.
|
| LocalPeeringGateway.Builder | |
| LoopBackDrgAttachmentNetworkDetails |
Specifies the loopback attachment on the DRG.
|
| LoopBackDrgAttachmentNetworkDetails.Builder | |
| MacsecKey |
An object defining the Secrets-in-Vault OCIDs representing the MACsec key.
|
| MacsecKey.Builder | |
| MacsecProperties |
Properties used for MACsec (if capable).
|
| MacsecProperties.Builder | |
| MeasuredBootEntry |
One Trusted Platform Module (TPM) Platform Configuration Register (PCR) entry.
|
| MeasuredBootEntry.Builder | |
| MeasuredBootReport |
The measured boot report for a shielded instance.
|
| MeasuredBootReport.Builder | |
| MeasuredBootReportMeasurements |
A list of Trusted Platform Module (TPM) Platform Configuration Register (PCR) entries.
|
| MeasuredBootReportMeasurements.Builder | |
| MemberReplica |
OCIDs for the volume replicas in this volume group replica.
|
| MemberReplica.Builder | |
| ModifyVcnCidrDetails |
Details for updating a CIDR block.
|
| ModifyVcnCidrDetails.Builder | |
| MultipathDevice |
Secondary multipath device, it uses the charUsername and chapSecret from primary volume
attachment
Note: Objects should always be created or deserialized using the MultipathDevice.Builder. |
| MultipathDevice.Builder | |
| NatGateway |
A NAT (Network Address Translation) gateway, which represents a router that lets instances
without public IPs contact the public internet without exposing the instance to inbound internet
traffic.
|
| NatGateway.Builder | |
| NetworkingTopology |
Defines the representation of a virtual network topology for a region.
|
| NetworkingTopology.Builder | |
| NetworkSecurityGroup |
A network security group (NSG) provides virtual firewall rules for a specific set of
Vnic in a VCN. |
| NetworkSecurityGroup.Builder | |
| NetworkSecurityGroupVnic |
Information about a VNIC that belongs to a network security group.
|
| NetworkSecurityGroupVnic.Builder | |
| ParavirtualizedVolumeAttachment |
A paravirtualized volume attachment.
|
| ParavirtualizedVolumeAttachment.Builder | |
| PeerRegionForRemotePeering |
Details about a region that supports remote VCN peering.
|
| PeerRegionForRemotePeering.Builder | |
| PercentageOfCoresEnabledOptions |
Configuration options for the percentage of cores enabled.
|
| PercentageOfCoresEnabledOptions.Builder | |
| PerformanceBasedAutotunePolicy |
If a volume is being throttled at the current setting for a certain period of time, auto-tune
will gradually increase the volume’s performance limited up to Maximum VPUs/GB.
|
| PerformanceBasedAutotunePolicy.Builder | |
| PhaseOneConfigDetails |
Configuration details for IKE phase one (ISAKMP) configuration parameters.
|
| PhaseOneConfigDetails.Builder | |
| PhaseTwoConfigDetails |
Configuration details for IPSec phase two configuration parameters.
|
| PhaseTwoConfigDetails.Builder | |
| PlatformConfig |
The platform configuration for the instance.
|
| PortRange |
Note: Objects should always be created or deserialized using the PortRange.Builder. |
| PortRange.Builder | |
| PreemptibleInstanceConfigDetails |
Configuration options for preemptible instances.
|
| PreemptibleInstanceConfigDetails.Builder | |
| PreemptionAction |
The action to run when the preemptible instance is interrupted for eviction.
|
| PrivateIp |
A private IP is a conceptual term that refers to an IPv4 private IP address and related
properties.
|
| PrivateIp.Builder | |
| PublicIp |
A public IP is a conceptual term that refers to a public IP address and related properties.
|
| PublicIp.Builder | |
| PublicIpPool |
A public IP pool is a set of public IP addresses represented as one or more IPv4 CIDR blocks.
|
| PublicIpPool.Builder | |
| PublicIpPoolCollection |
Results of a
ListPublicIpPool operation. |
| PublicIpPoolCollection.Builder | |
| PublicIpPoolSummary |
Summary information about a public IP pool.
|
| PublicIpPoolSummary.Builder | |
| RebootMigrateActionDetails |
Parameters for the
rebootMigrate instanceAction. |
| RebootMigrateActionDetails.Builder | |
| RemotePeeringConnection |
A remote peering connection (RPC) is an object on a DRG that lets the VCN that is attached to the
DRG peer with a VCN in a different region.
|
| RemotePeeringConnection.Builder | |
| RemotePeeringConnectionDrgAttachmentNetworkDetails |
Specifies the DRG attachment to another DRG.
|
| RemotePeeringConnectionDrgAttachmentNetworkDetails.Builder | |
| RemoveDrgRouteDistributionStatementsDetails |
Details request to remove statements from a route distribution.
|
| RemoveDrgRouteDistributionStatementsDetails.Builder | |
| RemoveDrgRouteRulesDetails |
Details used in a request to remove static routes from a DRG route table.
|
| RemoveDrgRouteRulesDetails.Builder | |
| RemoveNetworkSecurityGroupSecurityRulesDetails |
Note: Objects should always be created or deserialized using the RemoveNetworkSecurityGroupSecurityRulesDetails.Builder. |
| RemoveNetworkSecurityGroupSecurityRulesDetails.Builder | |
| RemovePublicIpPoolCapacityDetails |
The information needed to remove capacity from a public IP pool.
|
| RemovePublicIpPoolCapacityDetails.Builder | |
| RemoveSubnetIpv6CidrDetails |
Details object for removing an IPv6 prefix from a subnet.
|
| RemoveSubnetIpv6CidrDetails.Builder | |
| RemoveVcnCidrDetails |
Details for removing a CIDR block from a VCN.
|
| RemoveVcnCidrDetails.Builder | |
| RemoveVcnIpv6CidrDetails |
Details used when removing ULA or private IPv6 prefix or an IPv6 GUA assigned by Oracle or
BYOIPv6 prefix.
|
| RemoveVcnIpv6CidrDetails.Builder | |
| ResetActionDetails |
Parameters for the
reset instanceAction. |
| ResetActionDetails.Builder | |
| RouteRule |
A mapping between a destination IP address range and a virtual device to route matching packets
to (a target).
|
| RouteRule.Builder | |
| RouteTable |
A collection of
RouteRule objects, which are used to route packets based on destination
IP to a particular network entity. |
| RouteTable.Builder | |
| SecurityList |
A set of virtual firewall rules for your VCN.
|
| SecurityList.Builder | |
| SecurityRule |
A security rule is one of the items in a
NetworkSecurityGroup. |
| SecurityRule.Builder | |
| Service |
An object that represents one or multiple Oracle services that you can enable for a
ServiceGateway. |
| Service.Builder | |
| ServiceGateway |
Represents a router that lets your VCN privately access specific Oracle services such as Object
Storage without exposing the VCN to the public internet.
|
| ServiceGateway.Builder | |
| ServiceIdRequestDetails |
Note: Objects should always be created or deserialized using the ServiceIdRequestDetails.Builder. |
| ServiceIdRequestDetails.Builder | |
| ServiceIdResponseDetails |
Note: Objects should always be created or deserialized using the ServiceIdResponseDetails.Builder. |
| ServiceIdResponseDetails.Builder | |
| Shape |
A compute instance shape that can be used in
launchInstance. |
| Shape.Builder | |
| ShapeAccessControlServiceEnabledPlatformOptions |
Configuration options for the Access Control Service.
|
| ShapeAccessControlServiceEnabledPlatformOptions.Builder | |
| ShapeAlternativeObject |
The shape that Oracle recommends you to use an alternative to the current shape.
|
| ShapeAlternativeObject.Builder | |
| ShapeInputOutputMemoryManagementUnitEnabledPlatformOptions |
Configuration options for the input-output memory management unit (IOMMU).
|
| ShapeInputOutputMemoryManagementUnitEnabledPlatformOptions.Builder | |
| ShapeMaxVnicAttachmentOptions |
For a flexible shape, the number of VNIC attachments that are available for instances that use
this shape.
|
| ShapeMaxVnicAttachmentOptions.Builder | |
| ShapeMeasuredBootOptions |
Configuration options for the Measured Boot feature.
|
| ShapeMeasuredBootOptions.Builder | |
| ShapeMemoryEncryptionOptions |
Configuration options for memory encryption.
|
| ShapeMemoryEncryptionOptions.Builder | |
| ShapeMemoryOptions |
For a flexible shape, the amount of memory available for instances that use this shape.
|
| ShapeMemoryOptions.Builder | |
| ShapeNetworkingBandwidthOptions |
For a flexible shape, the amount of networking bandwidth available for instances that use this
shape.
|
| ShapeNetworkingBandwidthOptions.Builder | |
| ShapeNumaNodesPerSocketPlatformOptions |
Configuration options for NUMA nodes per socket.
|
| ShapeNumaNodesPerSocketPlatformOptions.Builder | |
| ShapeOcpuOptions |
For a flexible shape, the number of OCPUs available for instances that use this shape.
|
| ShapeOcpuOptions.Builder | |
| ShapePlatformConfigOptions |
The list of supported platform configuration options for this shape.
|
| ShapePlatformConfigOptions.Builder | |
| ShapeSecureBootOptions |
Configuration options for Secure Boot.
|
| ShapeSecureBootOptions.Builder | |
| ShapeSymmetricMultiThreadingEnabledPlatformOptions |
Configuration options for symmetric multithreading (also called simultaneous multithreading or
SMT).
|
| ShapeSymmetricMultiThreadingEnabledPlatformOptions.Builder | |
| ShapeTrustedPlatformModuleOptions |
Configuration options for the Trusted Platform Module (TPM).
|
| ShapeTrustedPlatformModuleOptions.Builder | |
| ShapeVirtualInstructionsEnabledPlatformOptions |
Configuration options for the virtualization instructions.
|
| ShapeVirtualInstructionsEnabledPlatformOptions.Builder | |
| SoftResetActionDetails |
Parameters for the
softReset instanceAction. |
| SoftResetActionDetails.Builder | |
| Subnet |
A logical subdivision of a VCN.
|
| Subnet.Builder | |
| SubnetTopology |
Defines the visualization of a subnet in a VCN.
|
| SubnetTopology.Builder | |
| TcpOptions |
Optional and valid only for TCP.
|
| TcpOptions.Builder | |
| TerminatePreemptionAction |
Terminates the preemptible instance when it is interrupted for eviction.
|
| TerminatePreemptionAction.Builder | |
| Topology |
Defines the representation of a virtual network topology.
|
| TopologyAssociatedWithEntityRelationship |
Defines the
AssociatedWith relationship between virtual network topology entities. |
| TopologyAssociatedWithEntityRelationship.Builder | |
| TopologyAssociatedWithRelationshipDetails |
Defines association details for an
associatedWith relationship. |
| TopologyAssociatedWithRelationshipDetails.Builder | |
| TopologyContainsEntityRelationship |
Defines the
contains relationship between virtual network topology entities. |
| TopologyContainsEntityRelationship.Builder | |
| TopologyEntityRelationship |
Defines the relationship between Virtual Network topology entities.
|
| TopologyRoutesToEntityRelationship |
Defines the
routesTo relationship between virtual network topology entities. |
| TopologyRoutesToEntityRelationship.Builder | |
| TopologyRoutesToRelationshipDetails |
Defines route rule details for a
routesTo relationship. |
| TopologyRoutesToRelationshipDetails.Builder | |
| TunnelConfig |
Deprecated.
|
| TunnelConfig.Builder | |
| TunnelCpeDeviceConfig |
The set of CPE configuration answers for the tunnel, which the customer provides in
updateTunnelCpeDeviceConfig. |
| TunnelCpeDeviceConfig.Builder | |
| TunnelPhaseOneDetails |
IPSec tunnel details specific to ISAKMP phase one.
|
| TunnelPhaseOneDetails.Builder | |
| TunnelPhaseTwoDetails |
IPsec tunnel detail information specific to phase two.
|
| TunnelPhaseTwoDetails.Builder | |
| TunnelRouteSummary |
A summary of the routes advertised to and received from the on-premises network.
|
| TunnelRouteSummary.Builder | |
| TunnelSecurityAssociationSummary |
A summary of the IPSec tunnel security association details.
|
| TunnelSecurityAssociationSummary.Builder | |
| TunnelStatus |
Deprecated.
|
| TunnelStatus.Builder | |
| UdpOptions |
Optional and valid only for UDP.
|
| UdpOptions.Builder | |
| UpdateBootVolumeBackupDetails |
Note: Objects should always be created or deserialized using the UpdateBootVolumeBackupDetails.Builder. |
| UpdateBootVolumeBackupDetails.Builder | |
| UpdateBootVolumeDetails |
Note: Objects should always be created or deserialized using the UpdateBootVolumeDetails.Builder. |
| UpdateBootVolumeDetails.Builder | |
| UpdateBootVolumeKmsKeyDetails |
Note: Objects should always be created or deserialized using the UpdateBootVolumeKmsKeyDetails.Builder. |
| UpdateBootVolumeKmsKeyDetails.Builder | |
| UpdateByoipRangeDetails |
The information used to update a
ByoipRange resource. |
| UpdateByoipRangeDetails.Builder | |
| UpdateCapacitySourceDetails |
A capacity source of bare metal hosts.
|
| UpdateCaptureFilterDetails |
These details can be included in a request to update a capture filter.
|
| UpdateCaptureFilterDetails.Builder | |
| UpdateClusterNetworkDetails |
The data to update a cluster network with instance
pools.
|
| UpdateClusterNetworkDetails.Builder | |
| UpdateClusterNetworkInstancePoolDetails |
The data to update an instance pool within a cluster network.
|
| UpdateClusterNetworkInstancePoolDetails.Builder | |
| UpdateComputeCapacityReservationDetails |
Details for updating the compute capacity reservation.
|
| UpdateComputeCapacityReservationDetails.Builder | |
| UpdateComputeCapacityTopologyDetails |
The details for updating the compute capacity topology.
|
| UpdateComputeCapacityTopologyDetails.Builder | |
| UpdateComputeClusterDetails |
The data to update a compute cluster.
|
| UpdateComputeClusterDetails.Builder | |
| UpdateComputeImageCapabilitySchemaDetails |
Create Image Capability Schema for an image.
|
| UpdateComputeImageCapabilitySchemaDetails.Builder | |
| UpdateConsoleHistoryDetails |
Note: Objects should always be created or deserialized using the UpdateConsoleHistoryDetails.Builder. |
| UpdateConsoleHistoryDetails.Builder | |
| UpdateCpeDetails |
Note: Objects should always be created or deserialized using the UpdateCpeDetails.Builder. |
| UpdateCpeDetails.Builder | |
| UpdateCrossConnectDetails |
Update a CrossConnect
Note: Objects should always be created or deserialized using the UpdateCrossConnectDetails.Builder. |
| UpdateCrossConnectDetails.Builder | |
| UpdateCrossConnectGroupDetails |
Note: Objects should always be created or deserialized using the UpdateCrossConnectGroupDetails.Builder. |
| UpdateCrossConnectGroupDetails.Builder | |
| UpdateDedicatedCapacitySourceDetails |
A capacity source of bare metal hosts that is dedicated to a user.
|
| UpdateDedicatedCapacitySourceDetails.Builder | |
| UpdateDedicatedVmHostDetails |
Details for updating the dedicated virtual machine host details.
|
| UpdateDedicatedVmHostDetails.Builder | |
| UpdateDhcpDetails |
Note: Objects should always be created or deserialized using the UpdateDhcpDetails.Builder. |
| UpdateDhcpDetails.Builder | |
| UpdatedNetworkSecurityGroupSecurityRules |
Note: Objects should always be created or deserialized using the UpdatedNetworkSecurityGroupSecurityRules.Builder. |
| UpdatedNetworkSecurityGroupSecurityRules.Builder | |
| UpdateDrgAttachmentDetails |
Note: Objects should always be created or deserialized using the UpdateDrgAttachmentDetails.Builder. |
| UpdateDrgAttachmentDetails.Builder | |
| UpdateDrgDetails |
Note: Objects should always be created or deserialized using the UpdateDrgDetails.Builder. |
| UpdateDrgDetails.Builder | |
| UpdateDrgRouteDistributionDetails |
Details used in a request to update a route distribution.
|
| UpdateDrgRouteDistributionDetails.Builder | |
| UpdateDrgRouteDistributionStatementDetails |
Route distribution statements to update in the route distribution.
|
| UpdateDrgRouteDistributionStatementDetails.Builder | |
| UpdateDrgRouteDistributionStatementsDetails |
Details request to update statements in a route distribution.
|
| UpdateDrgRouteDistributionStatementsDetails.Builder | |
| UpdateDrgRouteRuleDetails |
Details used to update a route rule in the DRG route table.
|
| UpdateDrgRouteRuleDetails.Builder | |
| UpdateDrgRouteRulesDetails |
Details used to update route rules in a DRG route table.
|
| UpdateDrgRouteRulesDetails.Builder | |
| UpdateDrgRouteTableDetails |
Details used in a request to update a DRG route table.
|
| UpdateDrgRouteTableDetails.Builder | |
| UpdateImageDetails |
Note: Objects should always be created or deserialized using the UpdateImageDetails.Builder. |
| UpdateImageDetails.Builder | |
| UpdateInstanceAgentConfigDetails |
Configuration options for the Oracle Cloud Agent software running on the instance.
|
| UpdateInstanceAgentConfigDetails.Builder | |
| UpdateInstanceAvailabilityConfigDetails |
Options for defining the availability of a VM instance after a maintenance event that impacts the
underlying hardware, including whether to live migrate supported VM instances when possible
without sending a prior customer notification.
|
| UpdateInstanceAvailabilityConfigDetails.Builder | |
| UpdateInstanceConfigurationDetails |
Note: Objects should always be created or deserialized using the UpdateInstanceConfigurationDetails.Builder. |
| UpdateInstanceConfigurationDetails.Builder | |
| UpdateInstanceConsoleConnectionDetails |
Specifies the properties for updating tags for an instance console connection.
|
| UpdateInstanceConsoleConnectionDetails.Builder | |
| UpdateInstanceDetails |
Note: Objects should always be created or deserialized using the UpdateInstanceDetails.Builder. |
| UpdateInstanceDetails.Builder | |
| UpdateInstanceMaintenanceEventDetails |
Specifies the properties for updating maintenance due date.
|
| UpdateInstanceMaintenanceEventDetails.Builder | |
| UpdateInstancePlatformConfig |
The platform configuration to be updated for the instance.
|
| UpdateInstancePoolDetails |
The data to update an instance pool.
|
| UpdateInstancePoolDetails.Builder | |
| UpdateInstancePoolPlacementConfigurationDetails |
The location for where an instance pool will place instances.
|
| UpdateInstancePoolPlacementConfigurationDetails.Builder | |
| UpdateInstanceShapeConfigDetails |
The shape configuration requested for the instance.
|
| UpdateInstanceShapeConfigDetails.Builder | |
| UpdateInstanceSourceDetails |
The details for updating the instance source.
|
| UpdateInstanceSourceViaBootVolumeDetails |
The details for updating the instance source from an existing boot volume.
|
| UpdateInstanceSourceViaBootVolumeDetails.Builder | |
| UpdateInstanceSourceViaImageDetails |
The details for updating the instance source from an image.
|
| UpdateInstanceSourceViaImageDetails.Builder | |
| UpdateInternetGatewayDetails |
Note: Objects should always be created or deserialized using the UpdateInternetGatewayDetails.Builder. |
| UpdateInternetGatewayDetails.Builder | |
| UpdateIPSecConnectionDetails |
Note: Objects should always be created or deserialized using the UpdateIPSecConnectionDetails.Builder. |
| UpdateIPSecConnectionDetails.Builder | |
| UpdateIPSecConnectionTunnelDetails |
Note: Objects should always be created or deserialized using the UpdateIPSecConnectionTunnelDetails.Builder. |
| UpdateIPSecConnectionTunnelDetails.Builder | |
| UpdateIPSecConnectionTunnelSharedSecretDetails |
Note: Objects should always be created or deserialized using the UpdateIPSecConnectionTunnelSharedSecretDetails.Builder. |
| UpdateIPSecConnectionTunnelSharedSecretDetails.Builder | |
| UpdateIPSecTunnelBgpSessionDetails |
Note: Objects should always be created or deserialized using the UpdateIPSecTunnelBgpSessionDetails.Builder. |
| UpdateIPSecTunnelBgpSessionDetails.Builder | |
| UpdateIPSecTunnelEncryptionDomainDetails |
Request to update a multi-encryption domain policy on the IPSec tunnel.
|
| UpdateIPSecTunnelEncryptionDomainDetails.Builder | |
| UpdateIpv6Details |
Note: Objects should always be created or deserialized using the UpdateIpv6Details.Builder. |
| UpdateIpv6Details.Builder | |
| UpdateLaunchOptions |
Options for tuning the compatibility and performance of VM shapes.
|
| UpdateLaunchOptions.Builder | |
| UpdateLocalPeeringGatewayDetails |
Note: Objects should always be created or deserialized using the UpdateLocalPeeringGatewayDetails.Builder. |
| UpdateLocalPeeringGatewayDetails.Builder | |
| UpdateMacsecKey |
An object defining the OCID of the Secret held in Vault that represent the MACsec key.
|
| UpdateMacsecKey.Builder | |
| UpdateMacsecProperties |
Properties used to update MACsec settings.
|
| UpdateMacsecProperties.Builder | |
| UpdateNatGatewayDetails |
Note: Objects should always be created or deserialized using the UpdateNatGatewayDetails.Builder. |
| UpdateNatGatewayDetails.Builder | |
| UpdateNetworkSecurityGroupDetails |
Note: Objects should always be created or deserialized using the UpdateNetworkSecurityGroupDetails.Builder. |
| UpdateNetworkSecurityGroupDetails.Builder | |
| UpdateNetworkSecurityGroupSecurityRulesDetails |
Note: Objects should always be created or deserialized using the UpdateNetworkSecurityGroupSecurityRulesDetails.Builder. |
| UpdateNetworkSecurityGroupSecurityRulesDetails.Builder | |
| UpdatePrivateIpDetails |
Note: Objects should always be created or deserialized using the UpdatePrivateIpDetails.Builder. |
| UpdatePrivateIpDetails.Builder | |
| UpdatePublicIpDetails |
Note: Objects should always be created or deserialized using the UpdatePublicIpDetails.Builder. |
| UpdatePublicIpDetails.Builder | |
| UpdatePublicIpPoolDetails |
The data to update for a public IP pool.
|
| UpdatePublicIpPoolDetails.Builder | |
| UpdateRemotePeeringConnectionDetails |
Note: Objects should always be created or deserialized using the UpdateRemotePeeringConnectionDetails.Builder. |
| UpdateRemotePeeringConnectionDetails.Builder | |
| UpdateRouteTableDetails |
Note: Objects should always be created or deserialized using the UpdateRouteTableDetails.Builder. |
| UpdateRouteTableDetails.Builder | |
| UpdateSecurityListDetails |
Note: Objects should always be created or deserialized using the UpdateSecurityListDetails.Builder. |
| UpdateSecurityListDetails.Builder | |
| UpdateSecurityRuleDetails |
A rule for allowing inbound (
direction= INGRESS) or outbound (direction= EGRESS)
IP packets. |
| UpdateSecurityRuleDetails.Builder | |
| UpdateServiceGatewayDetails |
Note: Objects should always be created or deserialized using the UpdateServiceGatewayDetails.Builder. |
| UpdateServiceGatewayDetails.Builder | |
| UpdateSubnetDetails |
Note: Objects should always be created or deserialized using the UpdateSubnetDetails.Builder. |
| UpdateSubnetDetails.Builder | |
| UpdateTunnelCpeDeviceConfigDetails |
Note: Objects should always be created or deserialized using the UpdateTunnelCpeDeviceConfigDetails.Builder. |
| UpdateTunnelCpeDeviceConfigDetails.Builder | |
| UpdateVcnDetails |
Note: Objects should always be created or deserialized using the UpdateVcnDetails.Builder. |
| UpdateVcnDetails.Builder | |
| UpdateVirtualCircuitDetails |
Note: Objects should always be created or deserialized using the UpdateVirtualCircuitDetails.Builder. |
| UpdateVirtualCircuitDetails.Builder | |
| UpdateVlanDetails |
Note: Objects should always be created or deserialized using the UpdateVlanDetails.Builder. |
| UpdateVlanDetails.Builder | |
| UpdateVnicDetails |
Note: Objects should always be created or deserialized using the UpdateVnicDetails.Builder. |
| UpdateVnicDetails.Builder | |
| UpdateVolumeAttachmentDetails |
details for updating a volume attachment.
|
| UpdateVolumeAttachmentDetails.Builder | |
| UpdateVolumeBackupDetails |
Note: Objects should always be created or deserialized using the UpdateVolumeBackupDetails.Builder. |
| UpdateVolumeBackupDetails.Builder | |
| UpdateVolumeBackupPolicyDetails |
Specifies the properties for updating a user defined backup policy.
|
| UpdateVolumeBackupPolicyDetails.Builder | |
| UpdateVolumeDetails |
Note: Objects should always be created or deserialized using the UpdateVolumeDetails.Builder. |
| UpdateVolumeDetails.Builder | |
| UpdateVolumeGroupBackupDetails |
Note: Objects should always be created or deserialized using the UpdateVolumeGroupBackupDetails.Builder. |
| UpdateVolumeGroupBackupDetails.Builder | |
| UpdateVolumeGroupDetails |
Note: Objects should always be created or deserialized using the UpdateVolumeGroupDetails.Builder. |
| UpdateVolumeGroupDetails.Builder | |
| UpdateVolumeKmsKeyDetails |
Note: Objects should always be created or deserialized using the UpdateVolumeKmsKeyDetails.Builder. |
| UpdateVolumeKmsKeyDetails.Builder | |
| UpdateVtapDetails |
These details can be included in a request to update a virtual test access point (VTAP).
|
| UpdateVtapDetails.Builder | |
| UpgradeStatus |
The upgrade status of a DRG.
|
| UpgradeStatus.Builder | |
| Vcn |
A virtual cloud network (VCN).
|
| Vcn.Builder | |
| VcnDnsResolverAssociation |
The information about the VCN and the DNS resolver in the association.
|
| VcnDnsResolverAssociation.Builder | |
| VcnDrgAttachmentNetworkCreateDetails |
Specifies the VCN Attachment
Note: Objects should always be created or deserialized using the VcnDrgAttachmentNetworkCreateDetails.Builder. |
| VcnDrgAttachmentNetworkCreateDetails.Builder | |
| VcnDrgAttachmentNetworkDetails |
Specifies details within the VCN.
|
| VcnDrgAttachmentNetworkDetails.Builder | |
| VcnDrgAttachmentNetworkUpdateDetails |
Specifies the update details for the VCN attachment.
|
| VcnDrgAttachmentNetworkUpdateDetails.Builder | |
| VcnTopology |
Defines the representation of a virtual network topology for a VCN.
|
| VcnTopology.Builder | |
| VirtualCircuit |
For use with Oracle Cloud Infrastructure FastConnect.
|
| VirtualCircuit.Builder | |
| VirtualCircuitAssociatedTunnelDetails |
Detailed private tunnel info associated with the virtual circuit.
|
| VirtualCircuitAssociatedTunnelDetails.Builder | |
| VirtualCircuitBandwidthShape |
An individual bandwidth level for virtual circuits.
|
| VirtualCircuitBandwidthShape.Builder | |
| VirtualCircuitDrgAttachmentNetworkDetails |
Specifies the virtual circuit attached to the DRG.
|
| VirtualCircuitDrgAttachmentNetworkDetails.Builder | |
| VirtualCircuitPublicPrefix |
A public IP prefix and its details.
|
| VirtualCircuitPublicPrefix.Builder | |
| Vlan |
A resource to be used only with the Oracle Cloud VMware Solution.
|
| Vlan.Builder | |
| Vnic |
A virtual network interface card.
|
| Vnic.Builder | |
| VnicAttachment |
Represents an attachment between a VNIC and an instance.
|
| VnicAttachment.Builder | |
| Volume |
A detachable block volume device that allows you to dynamically expand the storage capacity of an
instance.
|
| Volume.Builder | |
| VolumeAttachment |
A base object for all types of attachments between a storage volume and an instance.
|
| VolumeBackup |
A point-in-time copy of a volume that can then be used to create a new block volume or recover a
block volume.
|
| VolumeBackup.Builder | |
| VolumeBackupPolicy |
A policy for automatically creating volume backups according to a recurring schedule.
|
| VolumeBackupPolicy.Builder | |
| VolumeBackupPolicyAssignment |
Specifies the volume that the volume backup policy is assigned to.
|
| VolumeBackupPolicyAssignment.Builder | |
| VolumeBackupSchedule |
Defines the backup frequency and retention period for a volume backup policy.
|
| VolumeBackupSchedule.Builder | |
| VolumeGroup |
Specifies a volume group which is a collection of volumes.
|
| VolumeGroup.Builder | |
| VolumeGroupBackup |
A point-in-time copy of a volume group that can then be used to create a new volume group or
restore a volume group.
|
| VolumeGroupBackup.Builder | |
| VolumeGroupReplica |
An asynchronous replica of a volume group that can then be used to create a new volume group or
recover a volume group.
|
| VolumeGroupReplica.Builder | |
| VolumeGroupReplicaDetails |
Contains the details for the volume group replica.
|
| VolumeGroupReplicaDetails.Builder | |
| VolumeGroupReplicaInfo |
Information about the volume group replica in the destination availability domain.
|
| VolumeGroupReplicaInfo.Builder | |
| VolumeGroupSourceDetails |
Specifies the source for a volume group.
|
| VolumeGroupSourceFromVolumeGroupBackupDetails |
Specifies the volume group backup to restore from.
|
| VolumeGroupSourceFromVolumeGroupBackupDetails.Builder | |
| VolumeGroupSourceFromVolumeGroupDetails |
Specifies the volume group to clone from.
|
| VolumeGroupSourceFromVolumeGroupDetails.Builder | |
| VolumeGroupSourceFromVolumeGroupReplicaDetails |
Specifies the source volume replica which the volume group will be created from.
|
| VolumeGroupSourceFromVolumeGroupReplicaDetails.Builder | |
| VolumeGroupSourceFromVolumesDetails |
Specifies the volumes in a volume group.
|
| VolumeGroupSourceFromVolumesDetails.Builder | |
| VolumeKmsKey |
The Vault service master encryption key associated with this volume.
|
| VolumeKmsKey.Builder | |
| VolumeSourceDetails |
Specifies the volume source details for a new Block volume.
|
| VolumeSourceFromBlockVolumeReplicaDetails |
Specifies the source block volume replica which the block volume will be created from.
|
| VolumeSourceFromBlockVolumeReplicaDetails.Builder | |
| VolumeSourceFromVolumeBackupDetails |
Specifies the volume backup.
|
| VolumeSourceFromVolumeBackupDetails.Builder | |
| VolumeSourceFromVolumeDetails |
Specifies the source volume.
|
| VolumeSourceFromVolumeDetails.Builder | |
| Vtap |
A virtual test access point (VTAP) provides a way to mirror all traffic from a designated source
to a selected target in order to facilitate troubleshooting, security analysis, and data
monitoring.
|
| Vtap.Builder | |
| VtapCaptureFilterRuleDetails |
This resource contains the rules governing what traffic a VTAP mirrors.
|
| VtapCaptureFilterRuleDetails.Builder |
| Enum | Description |
|---|---|
| AddDrgRouteDistributionStatementDetails.Action |
Accept: import/export the route “as is”
|
| AddDrgRouteRuleDetails.DestinationType |
Type of destination for the rule.
|
| AddressType |
Address type of the CIDR/IP within a VCN or subnet
|
| AddSecurityRuleDetails.DestinationType |
Type of destination for the rule.
|
| AddSecurityRuleDetails.Direction |
Direction of the security rule.
|
| AddSecurityRuleDetails.SourceType |
Type of source for the rule.
|
| AmdMilanBmGpuLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| AmdMilanBmGpuPlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| AmdMilanBmLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| AmdMilanBmPlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| AmdRomeBmGpuLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| AmdRomeBmGpuPlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| AmdRomeBmLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| AmdRomeBmPlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| AppCatalogListingResourceVersion.AllowedActions | |
| AutotunePolicy.AutotuneType |
This specifies the type of autotunes supported by OCI.
|
| BgpSessionInfo.BgpIpv6State |
The state of the BGP IPv6 session.
|
| BgpSessionInfo.BgpState |
The state of the BGP session.
|
| BlockVolumeReplica.LifecycleState |
The current state of a block volume replica.
|
| BootVolume.LifecycleState |
The current state of a boot volume.
|
| BootVolumeAttachment.LifecycleState |
The current state of the boot volume attachment.
|
| BootVolumeBackup.LifecycleState |
The current state of a boot volume backup.
|
| BootVolumeBackup.SourceType |
Specifies whether the backup was created manually, or via scheduled backup policy.
|
| BootVolumeBackup.Type |
The type of a volume backup.
|
| BootVolumeReplica.LifecycleState |
The current state of a boot volume replica.
|
| ByoipRange.LifecycleDetails |
The
ByoipRange resource’s current status. |
| ByoipRange.LifecycleState |
The
ByoipRange resource’s current state. |
| CapacityReportShapeAvailability.AvailabilityStatus |
A flag denoting whether capacity is available.
|
| CapacitySource.CapacityType |
The capacity type of bare metal hosts.
|
| CaptureFilter.FilterType |
Indicates which service will use this capture filter
|
| CaptureFilter.LifecycleState |
The capture filter’s current administrative state.
|
| ClusterNetwork.LifecycleState |
The current state of the cluster network.
|
| ClusterNetworkPlacementConfigurationDetails.PlacementConstraint |
The placement constraint when reserving hosts.
|
| ClusterNetworkSummary.LifecycleState |
The current state of the cluster network.
|
| ComputeBareMetalHost.LifecycleDetails |
The lifecycle state details of the compute bare metal host.
|
| ComputeBareMetalHost.LifecycleState |
The current state of the compute bare metal host.
|
| ComputeCapacityReservation.LifecycleState |
The current state of the compute capacity reservation.
|
| ComputeCapacityTopology.LifecycleState |
The current state of the compute capacity topology.
|
| ComputeCluster.LifecycleState |
The current state of the compute cluster.
|
| ComputeHpcIsland.LifecycleState |
The current state of the compute HPC island.
|
| ComputeNetworkBlock.LifecycleState |
The current state of the compute network block.
|
| ConsoleHistory.LifecycleState |
The current state of the console history.
|
| CreateBootVolumeBackupDetails.Type |
The type of backup to create.
|
| CreateCaptureFilterDetails.FilterType |
Indicates which service will use this capture filter
|
| CreateDhcpDetails.DomainNameType |
The search domain name type of DHCP options
|
| CreateDrgRouteDistributionDetails.DistributionType |
Whether this distribution defines how routes get imported into route tables or exported
through DRG attachments.
|
| CreateImageDetails.LaunchMode |
Specifies the configuration mode for launching virtual machine (VM) instances.
|
| CreateInstanceConfigurationBase.Source |
The source of the instance configuration.
|
| CreateIPSecConnectionDetails.CpeLocalIdentifierType |
The type of identifier for your CPE device.
|
| CreateIPSecConnectionTunnelDetails.IkeVersion |
Internet Key Exchange protocol version.
|
| CreateIPSecConnectionTunnelDetails.NatTranslationEnabled |
By default (the
AUTO setting), IKE sends packets with a source and destination port
set to 500, and when it detects that the port used to forward packets has changed (most
likely because a NAT device is between the CPE device and the Oracle VPN headend) it will try
to negotiate the use of NAT-T. |
| CreateIPSecConnectionTunnelDetails.OracleInitiation |
Indicates whether the Oracle end of the IPSec connection is able to initiate starting up the
IPSec tunnel.
|
| CreateIPSecConnectionTunnelDetails.Routing |
The type of routing to use for this tunnel (BGP dynamic routing, static routing, or
policy-based routing).
|
| CreatePublicIpDetails.Lifetime |
Defines when the public IP is deleted and released back to the Oracle Cloud Infrastructure
public IP pool.
|
| CreateVirtualCircuitDetails.BgpAdminState |
Set to
ENABLED (the default) to activate the BGP session of the virtual circuit, set
to DISABLED to deactivate the virtual circuit. |
| CreateVirtualCircuitDetails.RoutingPolicy | |
| CreateVirtualCircuitDetails.Type |
The type of IP addresses used in this virtual circuit.
|
| CreateVolumeBackupDetails.Type |
The type of backup to create.
|
| CreateVolumeGroupBackupDetails.Type |
The type of backup to create.
|
| CreateVtapDetails.EncapsulationProtocol |
Defines an encapsulation header type for the VTAP’s mirrored traffic.
|
| CreateVtapDetails.SourceType |
The source type for the VTAP.
|
| CreateVtapDetails.TargetType |
The target type for the VTAP.
|
| CreateVtapDetails.TrafficMode |
Used to control the priority of traffic.
|
| CrossConnect.LifecycleState |
The cross-connect’s current state.
|
| CrossConnectGroup.LifecycleState |
The cross-connect group’s current state.
|
| CrossConnectMappingDetails.Ipv4BgpStatus |
The state of the Ipv4 BGP session.
|
| CrossConnectMappingDetails.Ipv6BgpStatus |
The state of the Ipv6 BGP session.
|
| CrossConnectStatus.EncryptionStatus |
Encryption status of this cross connect.
|
| CrossConnectStatus.InterfaceState |
Indicates whether Oracle’s side of the interface is up or down.
|
| CrossConnectStatus.LightLevelIndicator |
Status indicator corresponding to the light level.
|
| DedicatedVmHost.LifecycleState |
The current state of the dedicated VM host.
|
| DedicatedVmHostSummary.LifecycleState |
The current state of the dedicated VM host.
|
| DhcpDnsOption.ServerType |
VcnLocal: Reserved for future use.
|
| DhcpOptions.DomainNameType |
The search domain name type of DHCP options
|
| DhcpOptions.LifecycleState |
The current state of the set of DHCP options.
|
| DpdConfig.DpdMode |
This option defines whether DPD can be initiated from the Oracle side of the connection.
|
| Drg.LifecycleState |
The DRG’s current state.
|
| DrgAttachment.LifecycleState |
The DRG attachment’s current state.
|
| DrgAttachmentNetworkCreateDetails.Type | |
| DrgAttachmentNetworkDetails.Type | |
| DrgAttachmentNetworkUpdateDetails.Type | |
| DrgAttachmentTypeDrgRouteDistributionMatchCriteria.AttachmentType |
The type of the network resource to be included in this match.
|
| DrgRedundancyStatus.Status |
The redundancy status of the DRG.
|
| DrgRouteDistribution.DistributionType |
Whether this distribution defines how routes get imported into route tables or exported
through DRG attachments.
|
| DrgRouteDistribution.LifecycleState |
The route distribution’s current state.
|
| DrgRouteDistributionMatchCriteria.MatchType |
The type of the match criteria for a route distribution statement.
|
| DrgRouteDistributionStatement.Action |
ACCEPT indicates the route should be imported or exported as-is. |
| DrgRouteRule.DestinationType |
The type of destination for the rule.
|
| DrgRouteRule.RouteProvenance |
The earliest origin of a route.
|
| DrgRouteRule.RouteType |
You can specify static routes for the DRG route table using the API.
|
| DrgRouteTable.LifecycleState |
The DRG route table’s current state.
|
| EgressSecurityRule.DestinationType |
Type of destination for the rule.
|
| EncryptionInTransitType |
The attachment type of a BM volume.
|
| ExportImageDetails.ExportFormat |
The format to export the image to.
|
| FastConnectProviderService.BandwithShapeManagement |
Who is responsible for managing the virtual circuit bandwidth.
|
| FastConnectProviderService.CustomerAsnManagement |
Who is responsible for managing the ASN information for the network at the other end of the
connection from Oracle.
|
| FastConnectProviderService.PrivatePeeringBgpManagement |
Who is responsible for managing the private peering BGP information.
|
| FastConnectProviderService.ProviderServiceKeyManagement |
Who is responsible for managing the provider service key.
|
| FastConnectProviderService.PublicPeeringBgpManagement |
Who is responsible for managing the public peering BGP information.
|
| FastConnectProviderService.SupportedVirtualCircuitTypes | |
| FastConnectProviderService.Type |
Provider service type.
|
| FlowLogCaptureFilterRuleDetails.FlowLogType |
Type or types of VCN flow logs to store.
|
| FlowLogCaptureFilterRuleDetails.RuleAction |
Include or exclude a
ruleAction object. |
| GenericBmLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| GenericBmPlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| Image.LaunchMode |
Specifies the configuration mode for launching virtual machine (VM) instances.
|
| Image.LifecycleState | |
| Image.ListingType |
The listing type of the image.
|
| ImageCapabilitySchemaDescriptor.Source | |
| ImageSourceDetails.SourceImageType |
The format of the image to be imported.
|
| IngressSecurityRule.SourceType |
Type of source for the rule.
|
| Instance.LaunchMode |
Specifies the configuration mode for launching virtual machine (VM) instances.
|
| Instance.LifecycleState |
The current state of the instance.
|
| Instance.SecurityAttributesState |
The lifecycle state of the
securityAttributes |
| InstanceAgentPluginConfigDetails.DesiredState |
Whether the plugin should be enabled or disabled.
|
| InstanceAvailabilityConfig.RecoveryAction |
The lifecycle state for an instance when it is recovered after infrastructure maintenance.
|
| InstanceConfigurationAmdMilanBmGpuLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| InstanceConfigurationAmdMilanBmLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| InstanceConfigurationAmdRomeBmGpuLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| InstanceConfigurationAmdRomeBmLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| InstanceConfigurationAutotunePolicy.AutotuneType |
This specifies the type of autotunes supported by OCI.
|
| InstanceConfigurationAvailabilityConfig.RecoveryAction |
The lifecycle state for an instance when it is recovered after infrastructure maintenance.
|
| InstanceConfigurationGenericBmLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| InstanceConfigurationIntelIcelakeBmLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| InstanceConfigurationIntelSkylakeBmLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| InstanceConfigurationLaunchInstanceDetails.LaunchMode |
Specifies the configuration mode for launching virtual machine (VM) instances.
|
| InstanceConfigurationLaunchInstanceDetails.PreferredMaintenanceAction |
The preferred maintenance action for an instance.
|
| InstanceConfigurationLaunchInstancePlatformConfig.Type |
The type of platform being configured.
|
| InstanceConfigurationLaunchInstanceShapeConfigDetails.BaselineOcpuUtilization |
The baseline OCPU utilization for a subcore burstable VM instance.
|
| InstanceConfigurationLaunchOptions.BootVolumeType |
Emulation type for the boot volume.
|
| InstanceConfigurationLaunchOptions.Firmware |
Firmware used to boot VM.
|
| InstanceConfigurationLaunchOptions.NetworkType |
Emulation type for the physical network interface card (NIC).
|
| InstanceConfigurationLaunchOptions.RemoteDataVolumeType |
Emulation type for volume.
|
| InstanceConsoleConnection.LifecycleState |
The current state of the console connection.
|
| InstanceMaintenanceAlternativeResolutionActions |
These are alternative actions to the requested instanceAction that can be taken to resolve the
Maintenance.
|
| InstanceMaintenanceEvent.CreatedBy |
The creator of the maintenance event.
|
| InstanceMaintenanceEvent.InstanceAction |
This is the action that will be performed on the Instance by OCI when the Maintenance begins.
|
| InstanceMaintenanceEvent.LifecycleState |
The current state of the maintenance event.
|
| InstanceMaintenanceEvent.MaintenanceCategory |
This indicates the priority and allowed actions for this Maintenance.
|
| InstanceMaintenanceEvent.MaintenanceReason |
This is the reason that Maintenance is being performed.
|
| InstancePool.LifecycleState |
The current state of the instance pool.
|
| InstancePoolInstance.LifecycleState |
The attachment state of the instance in relation to the instance pool.
|
| InstancePoolInstanceLoadBalancerBackend.BackendHealthStatus |
The health of the backend as observed by the load balancer.
|
| InstancePoolLoadBalancerAttachment.LifecycleState |
The status of the interaction between the instance pool and the load balancer.
|
| InstancePoolSummary.LifecycleState |
The current state of the instance pool.
|
| InstanceShapeConfig.BaselineOcpuUtilization |
The baseline OCPU utilization for a subcore burstable VM instance.
|
| IntelIcelakeBmLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| IntelIcelakeBmPlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| IntelSkylakeBmLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| IntelSkylakeBmPlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
| InternetGateway.LifecycleState |
The internet gateway’s current state.
|
| InventoryResourceSummary.ResourceType |
Resource types of the resource.
|
| InventorySubnetSummary.ResourceType |
Resource types of the subnet.
|
| InventoryVcnSummary.ResourceType |
Resource types of the VCN.
|
| IpInventorySubnetResourceSummary.AssignedResourceType |
Type of the resource.
|
| IpInventorySubnetResourceSummary.AssociatedPublicIpPool |
Public IP address Pool the IP address is allocated from.
|
| IpInventorySubnetResourceSummary.IpAddressLifetime |
Lifetime of the allocated private IP address.
|
| IpInventorySubnetResourceSummary.PublicIpLifetime |
Lifetime of the assigned public IP address.
|
| IPSecConnection.CpeLocalIdentifierType |
The type of identifier for your CPE device.
|
| IPSecConnection.LifecycleState |
The IPSec connection’s current state.
|
| IPSecConnection.TransportType |
The transport type used for the IPSec connection.
|
| IPSecConnectionTunnel.DpdMode |
Dead peer detection (DPD) mode set on the Oracle side of the connection.
|
| IPSecConnectionTunnel.IkeVersion |
Internet Key Exchange protocol version.
|
| IPSecConnectionTunnel.LifecycleState |
The tunnel’s lifecycle state.
|
| IPSecConnectionTunnel.NatTranslationEnabled |
By default (the
AUTO setting), IKE sends packets with a source and destination port
set to 500, and when it detects that the port used to forward packets has changed (most
likely because a NAT device is between the CPE device and the Oracle VPN headend) it will try
to negotiate the use of NAT-T. |
| IPSecConnectionTunnel.OracleCanInitiate |
Indicates whether Oracle can only respond to a request to start an IPSec tunnel from the CPE
device, or both respond to and initiate requests.
|
| IPSecConnectionTunnel.Routing |
The type of routing used for this tunnel (BGP dynamic routing, static routing, or
policy-based routing).
|
| IPSecConnectionTunnel.Status |
The status of the tunnel based on IPSec protocol characteristics.
|
| Ipv6.LifecycleState |
The IPv6’s current state.
|
| LaunchCreateVolumeDetails.VolumeCreationType |
Specifies the method for volume creation.
|
| LaunchInstanceAvailabilityConfigDetails.RecoveryAction |
The lifecycle state for an instance when it is recovered after infrastructure maintenance.
|
| LaunchInstancePlatformConfig.Type |
The type of platform being configured.
|
| LaunchInstanceShapeConfigDetails.BaselineOcpuUtilization |
The baseline OCPU utilization for a subcore burstable VM instance.
|
| LaunchOptions.BootVolumeType |
Emulation type for the boot volume.
|
| LaunchOptions.Firmware |
Firmware used to boot VM.
|
| LaunchOptions.NetworkType |
Emulation type for the physical network interface card (NIC).
|
| LaunchOptions.RemoteDataVolumeType |
Emulation type for volume.
|
| LetterOfAuthority.CircuitType |
The type of cross-connect fiber, termination, and optical specification.
|
| ListIpInventoryDetails.ResourceTypeList | |
| ListIpInventoryDetails.SortBy |
Provide the sort order (
sortOrder) to sort the fields such as TIMECREATED in
descending or descending order, and DISPLAYNAME in case sensitive. |
| ListIpInventoryDetails.SortOrder |
Specifies the sort order to use.
|
| LocalPeeringGateway.LifecycleState |
The LPG’s current lifecycle state.
|
| LocalPeeringGateway.PeeringStatus |
Whether the LPG is peered with another LPG.
|
| MacsecEncryptionCipher |
Type of encryption cipher suite to use for the MACsec connection.
|
| MacsecState |
Indicates whether or not MACsec is enabled.
|
| MemberReplica.MembershipState |
Membership state of the volume replica in relation to the volume group replica.
|
| NatGateway.LifecycleState |
The NAT gateway’s current state.
|
| NetworkSecurityGroup.LifecycleState |
The network security group’s current state.
|
| PhaseOneConfigDetails.AuthenticationAlgorithm |
The custom authentication algorithm proposed during phase one tunnel negotiation.
|
| PhaseOneConfigDetails.DiffieHelmanGroup |
The custom Diffie-Hellman group proposed during phase one tunnel negotiation.
|
| PhaseOneConfigDetails.EncryptionAlgorithm |
The custom encryption algorithm proposed during phase one tunnel negotiation.
|
| PhaseTwoConfigDetails.AuthenticationAlgorithm |
The authentication algorithm proposed during phase two tunnel negotiation.
|
| PhaseTwoConfigDetails.EncryptionAlgorithm |
The encryption algorithm proposed during phase two tunnel negotiation.
|
| PhaseTwoConfigDetails.PfsDhGroup |
The Diffie-Hellman group used for PFS, if PFS is enabled.
|
| PlatformConfig.Type |
The type of platform being configured.
|
| PreemptionAction.Type |
The type of action to run when the instance is interrupted for eviction.
|
| PublicIp.AssignedEntityType |
The type of entity the public IP is assigned to, or in the process of being assigned to.
|
| PublicIp.LifecycleState |
The public IP’s current state.
|
| PublicIp.Lifetime |
Defines when the public IP is deleted and released back to Oracle’s public IP pool.
|
| PublicIp.Scope |
Whether the public IP is regional or specific to a particular availability domain.
|
| PublicIpPool.LifecycleState |
The public IP pool’s current state.
|
| RemotePeeringConnection.LifecycleState |
The RPC’s current lifecycle state.
|
| RemotePeeringConnection.PeeringStatus |
Whether the RPC is peered with another RPC.
|
| RouteRule.DestinationType |
Type of destination for the rule.
|
| RouteRule.RouteType |
A route rule can be STATIC if manually added to the route table, LOCAL if added by OCI to the
route table.
|
| RouteTable.LifecycleState |
The route table’s current state.
|
| SecurityList.LifecycleState |
The security list’s current state.
|
| SecurityRule.DestinationType |
Type of destination for the rule.
|
| SecurityRule.Direction |
Direction of the security rule.
|
| SecurityRule.SourceType |
Type of source for the rule.
|
| ServiceGateway.LifecycleState |
The service gateway’s current state.
|
| Shape.BaselineOcpuUtilizations | |
| Shape.BillingType |
How instances that use this shape are charged.
|
| ShapeNumaNodesPerSocketPlatformOptions.AllowedValues | |
| ShapePlatformConfigOptions.Type |
The type of platform being configured.
|
| Subnet.LifecycleState |
The subnet’s current state.
|
| Topology.Type |
Type of the topology object.
|
| TopologyEntityRelationship.Type |
The type of relationship between the entities.
|
| TopologyRoutesToRelationshipDetails.RouteType |
A route rule can be
STATIC if manually added to the route table or DYNAMIC if
imported from another route table. |
| TunnelRouteSummary.Advertiser |
The source of the route advertisement.
|
| TunnelSecurityAssociationSummary.TunnelSaStatus |
The IPSec tunnel’s phase one status.
|
| TunnelStatus.LifecycleState |
The tunnel’s current state.
|
| UpdateDhcpDetails.DomainNameType |
The search domain name type of DHCP options
|
| UpdateDrgRouteRuleDetails.DestinationType |
Type of destination for the rule.
|
| UpdateInstanceAvailabilityConfigDetails.RecoveryAction |
The lifecycle state for an instance when it is recovered after infrastructure maintenance.
|
| UpdateInstanceDetails.UpdateOperationConstraint |
The parameter acts as a fail-safe to prevent unwanted downtime when updating a running
instance.
|
| UpdateInstancePlatformConfig.Type |
The type of platform being configured.
|
| UpdateInstanceShapeConfigDetails.BaselineOcpuUtilization |
The baseline OCPU utilization for a subcore burstable VM instance.
|
| UpdateIPSecConnectionDetails.CpeLocalIdentifierType |
The type of identifier for your CPE device.
|
| UpdateIPSecConnectionTunnelDetails.IkeVersion |
Internet Key Exchange protocol version.
|
| UpdateIPSecConnectionTunnelDetails.NatTranslationEnabled |
By default (the
AUTO setting), IKE sends packets with a source and destination port
set to 500, and when it detects that the port used to forward packets has changed (most
likely because a NAT device is between the CPE device and the Oracle VPN headend) it will try
to negotiate the use of NAT-T. |
| UpdateIPSecConnectionTunnelDetails.OracleInitiation |
Indicates whether the Oracle end of the IPSec connection is able to initiate starting up the
IPSec tunnel.
|
| UpdateIPSecConnectionTunnelDetails.Routing |
The type of routing to use for this tunnel (BGP dynamic routing, static routing, or
policy-based routing).
|
| UpdateLaunchOptions.BootVolumeType |
Emulation type for the boot volume.
|
| UpdateLaunchOptions.NetworkType |
Emulation type for the physical network interface card (NIC).
|
| UpdateSecurityRuleDetails.DestinationType |
Type of destination for the rule.
|
| UpdateSecurityRuleDetails.Direction |
Direction of the security rule.
|
| UpdateSecurityRuleDetails.SourceType |
Type of source for the rule.
|
| UpdateVirtualCircuitDetails.BgpAdminState |
Set to
ENABLED (the default) to activate the BGP session of the virtual circuit, set
to DISABLED to deactivate the virtual circuit. |
| UpdateVirtualCircuitDetails.ProviderState |
The provider’s state in relation to this virtual circuit.
|
| UpdateVirtualCircuitDetails.RoutingPolicy | |
| UpdateVolumeAttachmentDetails.IscsiLoginState |
The iscsi login state of the volume attachment.
|
| UpdateVtapDetails.EncapsulationProtocol |
Defines an encapsulation header type for the VTAP’s mirrored traffic.
|
| UpdateVtapDetails.SourceType |
The source type for the VTAP.
|
| UpdateVtapDetails.TargetType |
The target type for the VTAP.
|
| UpdateVtapDetails.TrafficMode |
Used to control the priority of traffic.
|
| UpgradeStatus.Status |
The current upgrade status of the DRG attachment.
|
| Vcn.LifecycleState |
The VCN’s current state.
|
| VcnDnsResolverAssociation.LifecycleState |
The current state of the association.
|
| VcnDrgAttachmentNetworkDetails.VcnRouteType |
Indicates whether the VCN CIDRs or the individual subnet CIDRs are imported from the
attachment.
|
| VirtualCircuit.BgpAdminState |
Set to
ENABLED (the default) to activate the BGP session of the virtual circuit, set
to DISABLED to deactivate the virtual circuit. |
| VirtualCircuit.BgpIpv6SessionState |
The state of the Ipv6 BGP session associated with the virtual circuit.
|
| VirtualCircuit.BgpManagement |
Deprecated.
|
| VirtualCircuit.BgpSessionState |
The state of the Ipv4 BGP session associated with the virtual circuit.
|
| VirtualCircuit.LifecycleState |
The virtual circuit’s current state.
|
| VirtualCircuit.ProviderState |
The provider’s state in relation to this virtual circuit (if the customer is connecting via a
provider).
|
| VirtualCircuit.RoutingPolicy | |
| VirtualCircuit.ServiceType |
Provider service type.
|
| VirtualCircuit.Type |
Whether the virtual circuit supports private or public peering.
|
| VirtualCircuitAssociatedTunnelDetails.TunnelType |
The type of the tunnel associated with the virtual circuit.
|
| VirtualCircuitIpMtu |
The layer 3 IP MTU to use with this virtual circuit.
|
| VirtualCircuitPublicPrefix.VerificationState |
Oracle must verify that the customer owns the public IP prefix before traffic for that prefix
can flow across the virtual circuit.
|
| Vlan.LifecycleState |
The VLAN’s current state.
|
| Vnic.LifecycleState |
The current state of the VNIC.
|
| VnicAttachment.LifecycleState |
The current state of the VNIC attachment.
|
| Volume.LifecycleState |
The current state of a volume.
|
| VolumeAttachment.IscsiLoginState |
The iscsi login state of the volume attachment.
|
| VolumeAttachment.LifecycleState |
The current state of the volume attachment.
|
| VolumeBackup.LifecycleState |
The current state of a volume backup.
|
| VolumeBackup.SourceType |
Specifies whether the backup was created manually, or via scheduled backup policy.
|
| VolumeBackup.Type |
The type of a volume backup.
|
| VolumeBackupSchedule.BackupType |
The type of volume backup to create.
|
| VolumeBackupSchedule.DayOfWeek |
The day of the week to schedule the volume backup.
|
| VolumeBackupSchedule.Month |
The month of the year to schedule the volume backup.
|
| VolumeBackupSchedule.OffsetType |
Indicates how the offset is defined.
|
| VolumeBackupSchedule.Period |
The volume backup frequency.
|
| VolumeBackupSchedule.TimeZone |
Specifies what time zone is the schedule in
|
| VolumeGroup.LifecycleState |
The current state of a volume group.
|
| VolumeGroupBackup.LifecycleState |
The current state of a volume group backup.
|
| VolumeGroupBackup.SourceType |
Specifies whether the volume group backup was created manually, or via scheduled backup
policy.
|
| VolumeGroupBackup.Type |
The type of backup.
|
| VolumeGroupReplica.LifecycleState |
The current state of a volume group.
|
| Vtap.EncapsulationProtocol |
Defines an encapsulation header type for the VTAP’s mirrored traffic.
|
| Vtap.LifecycleState |
The VTAP’s administrative lifecycle state.
|
| Vtap.LifecycleStateDetails |
The VTAP’s current running state.
|
| Vtap.SourceType |
The source type for the VTAP.
|
| Vtap.TargetType |
The target type for the VTAP.
|
| Vtap.TrafficMode |
Used to control the priority of traffic.
|
| VtapCaptureFilterRuleDetails.RuleAction |
Include or exclude packets meeting this definition from mirrored traffic.
|
| VtapCaptureFilterRuleDetails.TrafficDirection |
The traffic direction the VTAP is configured to mirror.
|
Copyright © 2016–2024. All rights reserved.