Class | Description |
---|---|
AddDrgRouteDistributionStatementDetails |
Details used to add a route distribution statement.
|
AddDrgRouteDistributionStatementDetails.Builder | |
AddDrgRouteDistributionStatementsDetails |
Details request to add statements to a route distribution.
|
AddDrgRouteDistributionStatementsDetails.Builder | |
AddDrgRouteRuleDetails |
Details needed when adding a DRG route rule.
|
AddDrgRouteRuleDetails.Builder | |
AddDrgRouteRulesDetails |
Details used in a request to add static routes to a DRG route table.
|
AddDrgRouteRulesDetails.Builder | |
AddedNetworkSecurityGroupSecurityRules |
Note: Objects should always be created or deserialized using the AddedNetworkSecurityGroupSecurityRules.Builder . |
AddedNetworkSecurityGroupSecurityRules.Builder | |
AddImageShapeCompatibilityEntryDetails |
Image shape compatibility details.
|
AddImageShapeCompatibilityEntryDetails.Builder | |
AddNetworkSecurityGroupSecurityRulesDetails |
Note: Objects should always be created or deserialized using the AddNetworkSecurityGroupSecurityRulesDetails.Builder . |
AddNetworkSecurityGroupSecurityRulesDetails.Builder | |
AddPublicIpPoolCapacityDetails |
The information used to add capacity to an IP pool.
|
AddPublicIpPoolCapacityDetails.Builder | |
AddSecurityRuleDetails |
A rule for allowing inbound (INGRESS) or outbound (EGRESS) IP packets.
|
AddSecurityRuleDetails.Builder | |
AddSubnetIpv6CidrDetails |
Details used when adding an IPv6 prefix to a subnet.
|
AddSubnetIpv6CidrDetails.Builder | |
AddVcnCidrDetails |
Details used to add a CIDR block to a VCN.
|
AddVcnCidrDetails.Builder | |
AddVcnIpv6CidrDetails |
Details used when adding a ULA or private IPv6 prefix or an IPv6 GUA assigned by Oracle or a
BYOIPv6 prefix.
|
AddVcnIpv6CidrDetails.Builder | |
AllowedIkeIPSecParameters |
Lists the current allowed and default IPSec tunnel parameters.
|
AllowedIkeIPSecParameters.Builder | |
AllowedPhaseOneParameters |
Allowed phase one parameters.
|
AllowedPhaseOneParameters.Builder | |
AllowedPhaseTwoParameters |
Allowed phase two parameters.
|
AllowedPhaseTwoParameters.Builder | |
AmdMilanBmGpuLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal GPU instance with the following
shape: BM.GPU.GM4.8 (also named BM.GPU.A100-v2.8) (the AMD Milan platform).
|
AmdMilanBmGpuLaunchInstancePlatformConfig.Builder | |
AmdMilanBmGpuPlatformConfig |
The platform configuration used when launching a bare metal GPU instance with the following
shape: BM.GPU.GM4.8 (also named BM.GPU.A100-v2.8) (the AMD Milan platform).
|
AmdMilanBmGpuPlatformConfig.Builder | |
AmdMilanBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with one of the following
shapes: BM.Standard.E4.128 or BM.DenseIO.E4.128 (the AMD Milan platform).
|
AmdMilanBmLaunchInstancePlatformConfig.Builder | |
AmdMilanBmPlatformConfig |
The platform configuration used when launching a bare metal instance with one of the following
shapes: BM.Standard.E4.128 or BM.DenseIO.E4.128 (the AMD Milan platform).
|
AmdMilanBmPlatformConfig.Builder | |
AmdRomeBmGpuLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal GPU instance with the BM.GPU4.8 shape
(the AMD Rome platform).
|
AmdRomeBmGpuLaunchInstancePlatformConfig.Builder | |
AmdRomeBmGpuPlatformConfig |
The platform configuration of a bare metal GPU instance that uses the BM.GPU4.8 shape (the AMD
Rome platform).
|
AmdRomeBmGpuPlatformConfig.Builder | |
AmdRomeBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with the BM.Standard.E3.128
shape (the AMD Rome platform).
|
AmdRomeBmLaunchInstancePlatformConfig.Builder | |
AmdRomeBmPlatformConfig |
The platform configuration of a bare metal instance that uses the BM.Standard.E3.128 shape (the
AMD Rome platform).
|
AmdRomeBmPlatformConfig.Builder | |
AmdVmLaunchInstancePlatformConfig |
The platform configuration used when launching a virtual machine instance with the AMD platform.
|
AmdVmLaunchInstancePlatformConfig.Builder | |
AmdVmPlatformConfig |
The platform configuration of a virtual machine instance that uses the AMD platform.
|
AmdVmPlatformConfig.Builder | |
AmdVmUpdateInstancePlatformConfig |
The platform configuration used when updating a virtual machine instance with the AMD platform.
|
AmdVmUpdateInstancePlatformConfig.Builder | |
AppCatalogListing |
Listing details.
|
AppCatalogListing.Builder | |
AppCatalogListingResourceVersion |
Listing Resource Version
Note: Objects should always be created or deserialized using the AppCatalogListingResourceVersion.Builder . |
AppCatalogListingResourceVersion.Builder | |
AppCatalogListingResourceVersionAgreements |
Agreements for a listing resource version.
|
AppCatalogListingResourceVersionAgreements.Builder | |
AppCatalogListingResourceVersionSummary |
Listing Resource Version summary
Note: Objects should always be created or deserialized using the AppCatalogListingResourceVersionSummary.Builder . |
AppCatalogListingResourceVersionSummary.Builder | |
AppCatalogListingSummary |
A summary of a listing.
|
AppCatalogListingSummary.Builder | |
AppCatalogSubscription |
a subscription for a listing resource version.
|
AppCatalogSubscription.Builder | |
AppCatalogSubscriptionSummary |
a subscription summary for a listing resource version.
|
AppCatalogSubscriptionSummary.Builder | |
AttachBootVolumeDetails |
Note: Objects should always be created or deserialized using the AttachBootVolumeDetails.Builder . |
AttachBootVolumeDetails.Builder | |
AttachEmulatedVolumeDetails |
Note: Objects should always be created or deserialized using the AttachEmulatedVolumeDetails.Builder . |
AttachEmulatedVolumeDetails.Builder | |
AttachInstancePoolInstanceDetails |
An instance that is to be attached to an instance pool.
|
AttachInstancePoolInstanceDetails.Builder | |
AttachIScsiVolumeDetails |
Note: Objects should always be created or deserialized using the AttachIScsiVolumeDetails.Builder . |
AttachIScsiVolumeDetails.Builder | |
AttachLoadBalancerDetails |
Represents a load balancer that is to be attached to an instance pool.
|
AttachLoadBalancerDetails.Builder | |
AttachParavirtualizedVolumeDetails |
Note: Objects should always be created or deserialized using the AttachParavirtualizedVolumeDetails.Builder . |
AttachParavirtualizedVolumeDetails.Builder | |
AttachServiceDeterminedVolumeDetails |
Note: Objects should always be created or deserialized using the AttachServiceDeterminedVolumeDetails.Builder . |
AttachServiceDeterminedVolumeDetails.Builder | |
AttachVnicDetails |
Note: Objects should always be created or deserialized using the AttachVnicDetails.Builder . |
AttachVnicDetails.Builder | |
AttachVolumeDetails |
Note: Objects should always be created or deserialized using the Builder . |
AutotunePolicy |
An autotune policy automatically tunes the volume’s performace based on the type of the policy.
|
BgpSessionInfo |
Information for establishing a BGP session for the IPSec tunnel.
|
BgpSessionInfo.Builder | |
BlockVolumeReplica |
An asynchronous replica of a block volume that can then be used to create a new block volume or
recover a block volume.
|
BlockVolumeReplica.Builder | |
BlockVolumeReplicaDetails |
Contains the details for the block volume replica
Note: Objects should always be created or deserialized using the BlockVolumeReplicaDetails.Builder . |
BlockVolumeReplicaDetails.Builder | |
BlockVolumeReplicaInfo |
Information about the block volume replica in the destination availability domain.
|
BlockVolumeReplicaInfo.Builder | |
BooleanImageCapabilitySchemaDescriptor |
Boolean type ImageCapabilitySchemaDescriptor
Note: Objects should always be created or deserialized using the BooleanImageCapabilitySchemaDescriptor.Builder . |
BooleanImageCapabilitySchemaDescriptor.Builder | |
BootVolume |
A detachable boot volume device that contains the image used to boot a Compute instance.
|
BootVolume.Builder | |
BootVolumeAttachment |
Represents an attachment between a boot volume and an instance.
|
BootVolumeAttachment.Builder | |
BootVolumeBackup |
A point-in-time copy of a boot volume that can then be used to create a new boot volume or
recover a boot volume.
|
BootVolumeBackup.Builder | |
BootVolumeKmsKey |
The Vault service master encryption key associated with this volume.
|
BootVolumeKmsKey.Builder | |
BootVolumeReplica |
An asynchronous replica of a boot volume that can then be used to create a new boot volume or
recover a boot volume.
|
BootVolumeReplica.Builder | |
BootVolumeReplicaDetails |
Contains the details for the boot volume replica
Note: Objects should always be created or deserialized using the BootVolumeReplicaDetails.Builder . |
BootVolumeReplicaDetails.Builder | |
BootVolumeReplicaInfo |
Information about the boot volume replica in the destination availability domain.
|
BootVolumeReplicaInfo.Builder | |
BootVolumeSourceDetails |
Note: Objects should always be created or deserialized using the Builder . |
BootVolumeSourceFromBootVolumeBackupDeltaDetails |
Specifies the boot volume backups (first & second) and block size in bytes.
|
BootVolumeSourceFromBootVolumeBackupDeltaDetails.Builder | |
BootVolumeSourceFromBootVolumeBackupDetails |
Specifies the boot volume backup.
|
BootVolumeSourceFromBootVolumeBackupDetails.Builder | |
BootVolumeSourceFromBootVolumeDetails |
Specifies the source boot volume.
|
BootVolumeSourceFromBootVolumeDetails.Builder | |
BootVolumeSourceFromBootVolumeReplicaDetails |
Specifies the source boot volume replica which the boot volume will be created from.
|
BootVolumeSourceFromBootVolumeReplicaDetails.Builder | |
BulkAddVirtualCircuitPublicPrefixesDetails |
Note: Objects should always be created or deserialized using the BulkAddVirtualCircuitPublicPrefixesDetails.Builder . |
BulkAddVirtualCircuitPublicPrefixesDetails.Builder | |
BulkDeleteVirtualCircuitPublicPrefixesDetails |
Note: Objects should always be created or deserialized using the BulkDeleteVirtualCircuitPublicPrefixesDetails.Builder . |
BulkDeleteVirtualCircuitPublicPrefixesDetails.Builder | |
ByoipAllocatedRangeCollection |
Results of a
ListByoipAllocatedRanges operation. |
ByoipAllocatedRangeCollection.Builder | |
ByoipAllocatedRangeSummary |
A summary of CIDR block subranges that are currently allocated to an IP pool.
|
ByoipAllocatedRangeSummary.Builder | |
ByoipRange |
Oracle offers the ability to Bring Your Own IP (BYOIP), importing public IP addresses or IPv6
addresses that you currently own to Oracle Cloud Infrastructure.
|
ByoipRange.Builder | |
ByoipRangeCollection |
The results returned by a
ListByoipRange operation. |
ByoipRangeCollection.Builder | |
ByoipRangeSummary |
Information about a
ByoipRange resource. |
ByoipRangeSummary.Builder | |
ByoipRangeVcnIpv6AllocationSummary |
A summary of IPv6 prefix subranges currently allocated to a VCN.
|
ByoipRangeVcnIpv6AllocationSummary.Builder | |
Byoipv6CidrDetails |
The list of one or more BYOIPv6 prefixes for the VCN that meets the following criteria: - The
prefix must be from a BYOIPv6 range.
|
Byoipv6CidrDetails.Builder | |
CapacityReportInstanceShapeConfig |
The shape configuration for a shape in a capacity report.
|
CapacityReportInstanceShapeConfig.Builder | |
CapacityReportShapeAvailability |
Information about the available capacity for a shape.
|
CapacityReportShapeAvailability.Builder | |
CapacityReservationInstanceSummary |
Condensed instance data when listing instances in a compute capacity reservation.
|
CapacityReservationInstanceSummary.Builder | |
CapacitySource |
A capacity source of bare metal hosts.
|
CaptureConsoleHistoryDetails |
Note: Objects should always be created or deserialized using the CaptureConsoleHistoryDetails.Builder . |
CaptureConsoleHistoryDetails.Builder | |
CaptureFilter |
A capture filter contains a set of
captureFilterRuleDetails governing
what traffic is mirrored for a Vtap or captured for a VCN Flow
Log. |
CaptureFilter.Builder | |
ChangeBootVolumeBackupCompartmentDetails |
Contains the details for the compartment to move the boot volume backup to.
|
ChangeBootVolumeBackupCompartmentDetails.Builder | |
ChangeBootVolumeCompartmentDetails |
Contains the details for the compartment to move the boot volume to.
|
ChangeBootVolumeCompartmentDetails.Builder | |
ChangeByoipRangeCompartmentDetails |
The configuration details for the move operation.
|
ChangeByoipRangeCompartmentDetails.Builder | |
ChangeCaptureFilterCompartmentDetails |
These configuration details are used in the move operation when changing the compartment
containing a capture filter.
|
ChangeCaptureFilterCompartmentDetails.Builder | |
ChangeClusterNetworkCompartmentDetails |
The configuration details for the move operation.
|
ChangeClusterNetworkCompartmentDetails.Builder | |
ChangeComputeCapacityReservationCompartmentDetails |
Specifies the compartment to move the compute capacity reservation to.
|
ChangeComputeCapacityReservationCompartmentDetails.Builder | |
ChangeComputeCapacityTopologyCompartmentDetails |
Specifies the compartment to move the compute capacity topology to.
|
ChangeComputeCapacityTopologyCompartmentDetails.Builder | |
ChangeComputeClusterCompartmentDetails |
The configuration details for the move operation.
|
ChangeComputeClusterCompartmentDetails.Builder | |
ChangeComputeImageCapabilitySchemaCompartmentDetails |
The configuration details for the move operation.
|
ChangeComputeImageCapabilitySchemaCompartmentDetails.Builder | |
ChangeCpeCompartmentDetails |
The configuration details for the move operation.
|
ChangeCpeCompartmentDetails.Builder | |
ChangeCrossConnectCompartmentDetails |
The configuration details for the move operation.
|
ChangeCrossConnectCompartmentDetails.Builder | |
ChangeCrossConnectGroupCompartmentDetails |
The configuration details for the move operation.
|
ChangeCrossConnectGroupCompartmentDetails.Builder | |
ChangeDedicatedVmHostCompartmentDetails |
Specifies the compartment to move the dedicated virtual machine host to.
|
ChangeDedicatedVmHostCompartmentDetails.Builder | |
ChangeDhcpOptionsCompartmentDetails |
The configuration details for the move operation.
|
ChangeDhcpOptionsCompartmentDetails.Builder | |
ChangeDrgCompartmentDetails |
The configuration details for the move operation.
|
ChangeDrgCompartmentDetails.Builder | |
ChangeImageCompartmentDetails |
The configuration details for the move operation.
|
ChangeImageCompartmentDetails.Builder | |
ChangeInstanceCompartmentDetails |
The configuration details for the move operation.
|
ChangeInstanceCompartmentDetails.Builder | |
ChangeInstanceConfigurationCompartmentDetails |
The configuration details for the move operation.
|
ChangeInstanceConfigurationCompartmentDetails.Builder | |
ChangeInstancePoolCompartmentDetails |
The configuration details for the move operation.
|
ChangeInstancePoolCompartmentDetails.Builder | |
ChangeInternetGatewayCompartmentDetails |
The configuration details for the move operation.
|
ChangeInternetGatewayCompartmentDetails.Builder | |
ChangeIPSecConnectionCompartmentDetails |
The configuration details for the move operation.
|
ChangeIPSecConnectionCompartmentDetails.Builder | |
ChangeLocalPeeringGatewayCompartmentDetails |
The configuration details for the move operation.
|
ChangeLocalPeeringGatewayCompartmentDetails.Builder | |
ChangeNatGatewayCompartmentDetails |
The configuration details for the move operation.
|
ChangeNatGatewayCompartmentDetails.Builder | |
ChangeNetworkSecurityGroupCompartmentDetails |
Note: Objects should always be created or deserialized using the ChangeNetworkSecurityGroupCompartmentDetails.Builder . |
ChangeNetworkSecurityGroupCompartmentDetails.Builder | |
ChangePublicIpCompartmentDetails |
The configuration details for the move operation.
|
ChangePublicIpCompartmentDetails.Builder | |
ChangePublicIpPoolCompartmentDetails |
The configuration details for the move operation.
|
ChangePublicIpPoolCompartmentDetails.Builder | |
ChangeRemotePeeringConnectionCompartmentDetails |
The configuration details for the move operation.
|
ChangeRemotePeeringConnectionCompartmentDetails.Builder | |
ChangeRouteTableCompartmentDetails |
The configuration details for the move operation.
|
ChangeRouteTableCompartmentDetails.Builder | |
ChangeSecurityListCompartmentDetails |
The configuration details for the move operation.
|
ChangeSecurityListCompartmentDetails.Builder | |
ChangeServiceGatewayCompartmentDetails |
The configuration details for the move operation.
|
ChangeServiceGatewayCompartmentDetails.Builder | |
ChangeSubnetCompartmentDetails |
The configuration details for the move operation.
|
ChangeSubnetCompartmentDetails.Builder | |
ChangeVcnCompartmentDetails |
The configuration details for the move operation.
|
ChangeVcnCompartmentDetails.Builder | |
ChangeVirtualCircuitCompartmentDetails |
The configuration details for the move operation.
|
ChangeVirtualCircuitCompartmentDetails.Builder | |
ChangeVlanCompartmentDetails |
The configuration details for the move operation.
|
ChangeVlanCompartmentDetails.Builder | |
ChangeVolumeBackupCompartmentDetails |
Contains the details for the compartment to move the volume backup to.
|
ChangeVolumeBackupCompartmentDetails.Builder | |
ChangeVolumeCompartmentDetails |
Contains the details for the compartment to move the volume to.
|
ChangeVolumeCompartmentDetails.Builder | |
ChangeVolumeGroupBackupCompartmentDetails |
Contains the details for the compartment to move the volume group backup to.
|
ChangeVolumeGroupBackupCompartmentDetails.Builder | |
ChangeVolumeGroupCompartmentDetails |
Contains the details for the compartment to move the volume group to.
|
ChangeVolumeGroupCompartmentDetails.Builder | |
ChangeVtapCompartmentDetails |
These configuration details are used in the move operation when changing the compartment
containing a virtual test access point (VTAP).
|
ChangeVtapCompartmentDetails.Builder | |
ClusterConfigDetails |
The HPC cluster configuration requested when launching instances in a compute capacity
reservation.
|
ClusterConfigDetails.Builder | |
ClusterConfigurationDetails |
The HPC cluster configuration requested when launching instances of a cluster network.
|
ClusterConfigurationDetails.Builder | |
ClusterNetwork |
A cluster network is a group of high performance computing (HPC), GPU, or optimized bare metal
instances that are connected with an ultra low-latency remote direct memory access (RDMA)
network.
|
ClusterNetwork.Builder | |
ClusterNetworkPlacementConfigurationDetails |
The location for where the instance pools in a cluster network will place instances.
|
ClusterNetworkPlacementConfigurationDetails.Builder | |
ClusterNetworkSummary |
Summary information for a cluster network with instance
pools.
|
ClusterNetworkSummary.Builder | |
CompartmentInternal |
Helper definition required to perform authZ using SPLAT expressions on a Compartment
Note: Objects should always be created or deserialized using the CompartmentInternal.Builder . |
CompartmentInternal.Builder | |
ComputeBareMetalHost |
A compute bare metal host.
|
ComputeBareMetalHost.Builder | |
ComputeBareMetalHostCollection |
A list of compute bare metal hosts.
|
ComputeBareMetalHostCollection.Builder | |
ComputeBareMetalHostSummary |
Summary information for a compute bare metal host.
|
ComputeBareMetalHostSummary.Builder | |
ComputeCapacityReport |
A report of the host capacity within an availability domain that is available for you to create
compute instances.
|
ComputeCapacityReport.Builder | |
ComputeCapacityReservation |
A template that defines the settings to use when creating compute capacity reservations.
|
ComputeCapacityReservation.Builder | |
ComputeCapacityReservationInstanceShapeSummary |
An available shape used to launch instances in a compute capacity reservation.
|
ComputeCapacityReservationInstanceShapeSummary.Builder | |
ComputeCapacityReservationSummary |
Summary information for a compute capacity reservation.
|
ComputeCapacityReservationSummary.Builder | |
ComputeCapacityTopology |
A compute capacity topology that allows you to query your bare metal hosts and their RDMA network
topology.
|
ComputeCapacityTopology.Builder | |
ComputeCapacityTopologyCollection |
A list of compute capacity topologies.
|
ComputeCapacityTopologyCollection.Builder | |
ComputeCapacityTopologySummary |
Summary information for a compute capacity topology.
|
ComputeCapacityTopologySummary.Builder | |
ComputeCluster |
A remote direct memory access (RDMA) network group.
|
ComputeCluster.Builder | |
ComputeClusterCollection |
A list of compute clusters that match filter criteria, if any.
|
ComputeClusterCollection.Builder | |
ComputeClusterSummary |
Summary information for a compute cluster.
|
ComputeClusterSummary.Builder | |
ComputeGlobalImageCapabilitySchema |
Compute Global Image Capability Schema is a container for a set of compute global image
capability schema versions
Note: Objects should always be created or deserialized using the ComputeGlobalImageCapabilitySchema.Builder . |
ComputeGlobalImageCapabilitySchema.Builder | |
ComputeGlobalImageCapabilitySchemaSummary |
Summary information for a compute global image capability schema
Note: Objects should always be created or deserialized using the ComputeGlobalImageCapabilitySchemaSummary.Builder . |
ComputeGlobalImageCapabilitySchemaSummary.Builder | |
ComputeGlobalImageCapabilitySchemaVersion |
Compute Global Image Capability Schema Version is a set of all possible capabilities for a
collection of images.
|
ComputeGlobalImageCapabilitySchemaVersion.Builder | |
ComputeGlobalImageCapabilitySchemaVersionSummary |
Summary information for a compute global image capability schema
Note: Objects should always be created or deserialized using the ComputeGlobalImageCapabilitySchemaVersionSummary.Builder . |
ComputeGlobalImageCapabilitySchemaVersionSummary.Builder | |
ComputeHpcIsland |
A compute HPC island.
|
ComputeHpcIsland.Builder | |
ComputeHpcIslandCollection |
A list of compute HPC islands.
|
ComputeHpcIslandCollection.Builder | |
ComputeHpcIslandSummary |
Summary information for a compute HPC island.
|
ComputeHpcIslandSummary.Builder | |
ComputeImageCapabilitySchema |
Compute Image Capability Schema is a set of capabilities that filter the compute global
capability schema version for an image.
|
ComputeImageCapabilitySchema.Builder | |
ComputeImageCapabilitySchemaSummary |
Summary information for a compute image capability schema
Note: Objects should always be created or deserialized using the ComputeImageCapabilitySchemaSummary.Builder . |
ComputeImageCapabilitySchemaSummary.Builder | |
ComputeInstanceDetails |
Compute Instance Configuration instance details.
|
ComputeInstanceDetails.Builder | |
ComputeInstanceOptions |
Multiple Compute Instance Configuration instance details.
|
ComputeInstanceOptions.Builder | |
ComputeNetworkBlock |
A compute network block.
|
ComputeNetworkBlock.Builder | |
ComputeNetworkBlockCollection |
A list of compute network blocks.
|
ComputeNetworkBlockCollection.Builder | |
ComputeNetworkBlockSummary |
Summary information for a compute network block.
|
ComputeNetworkBlockSummary.Builder | |
ConnectLocalPeeringGatewaysDetails |
Information about the other local peering gateway (LPG).
|
ConnectLocalPeeringGatewaysDetails.Builder | |
ConnectRemotePeeringConnectionsDetails |
Information about the other remote peering connection (RPC).
|
ConnectRemotePeeringConnectionsDetails.Builder | |
ConsoleHistory |
An instance’s serial console data.
|
ConsoleHistory.Builder | |
CopyBootVolumeBackupDetails |
Note: Objects should always be created or deserialized using the CopyBootVolumeBackupDetails.Builder . |
CopyBootVolumeBackupDetails.Builder | |
CopyVolumeBackupDetails |
Note: Objects should always be created or deserialized using the CopyVolumeBackupDetails.Builder . |
CopyVolumeBackupDetails.Builder | |
CopyVolumeGroupBackupDetails |
Note: Objects should always be created or deserialized using the CopyVolumeGroupBackupDetails.Builder . |
CopyVolumeGroupBackupDetails.Builder | |
Cpe |
An object you create when setting up a Site-to-Site VPN between your on-premises network and VCN.
|
Cpe.Builder | |
CpeDeviceConfigAnswer |
An individual answer to a CPE device question.
|
CpeDeviceConfigAnswer.Builder | |
CpeDeviceConfigQuestion |
An individual question that the customer can answer about the CPE device.
|
CpeDeviceConfigQuestion.Builder | |
CpeDeviceInfo |
Basic information about a particular CPE device type.
|
CpeDeviceInfo.Builder | |
CpeDeviceShapeDetail |
The detailed information about a particular CPE device type.
|
CpeDeviceShapeDetail.Builder | |
CpeDeviceShapeSummary |
A summary of information about a particular CPE device type.
|
CpeDeviceShapeSummary.Builder | |
CreateAppCatalogSubscriptionDetails |
details for creating a subscription for a listing resource version.
|
CreateAppCatalogSubscriptionDetails.Builder | |
CreateBootVolumeBackupDetails |
Note: Objects should always be created or deserialized using the CreateBootVolumeBackupDetails.Builder . |
CreateBootVolumeBackupDetails.Builder | |
CreateBootVolumeDetails |
Note: Objects should always be created or deserialized using the CreateBootVolumeDetails.Builder . |
CreateBootVolumeDetails.Builder | |
CreateByoipRangeDetails |
The information used to create a
ByoipRange resource. |
CreateByoipRangeDetails.Builder | |
CreateCapacityReportShapeAvailabilityDetails |
Information about the shapes in a capacity report.
|
CreateCapacityReportShapeAvailabilityDetails.Builder | |
CreateCapacitySourceDetails |
A capacity source of bare metal hosts.
|
CreateCaptureFilterDetails |
A capture filter contains a set of rules governing what traffic a VTAP mirrors or a VCN flow log
collects.
|
CreateCaptureFilterDetails.Builder | |
CreateClusterNetworkDetails |
The data to create a cluster network with instance
pools.
|
CreateClusterNetworkDetails.Builder | |
CreateClusterNetworkInstancePoolDetails |
The data to create an instance pool in a cluster network.
|
CreateClusterNetworkInstancePoolDetails.Builder | |
CreateComputeCapacityReportDetails |
The data to create a report of available Compute capacity.
|
CreateComputeCapacityReportDetails.Builder | |
CreateComputeCapacityReservationDetails |
The details for creating a new compute capacity reservation.
|
CreateComputeCapacityReservationDetails.Builder | |
CreateComputeCapacityTopologyDetails |
The details for creating a new compute capacity topology.
|
CreateComputeCapacityTopologyDetails.Builder | |
CreateComputeClusterDetails |
The data for creating a compute
cluster.
|
CreateComputeClusterDetails.Builder | |
CreateComputeImageCapabilitySchemaDetails |
Create Image Capability Schema for an image.
|
CreateComputeImageCapabilitySchemaDetails.Builder | |
CreateCpeDetails |
Note: Objects should always be created or deserialized using the CreateCpeDetails.Builder . |
CreateCpeDetails.Builder | |
CreateCrossConnectDetails |
Note: Objects should always be created or deserialized using the CreateCrossConnectDetails.Builder . |
CreateCrossConnectDetails.Builder | |
CreateCrossConnectGroupDetails |
Note: Objects should always be created or deserialized using the CreateCrossConnectGroupDetails.Builder . |
CreateCrossConnectGroupDetails.Builder | |
CreateDedicatedCapacitySourceDetails |
A capacity source of bare metal hosts that is dedicated to a customer.
|
CreateDedicatedCapacitySourceDetails.Builder | |
CreateDedicatedVmHostDetails |
The details for creating a new dedicated virtual machine host.
|
CreateDedicatedVmHostDetails.Builder | |
CreateDhcpDetails |
Note: Objects should always be created or deserialized using the CreateDhcpDetails.Builder . |
CreateDhcpDetails.Builder | |
CreateDrgAttachmentDetails |
Note: Objects should always be created or deserialized using the CreateDrgAttachmentDetails.Builder . |
CreateDrgAttachmentDetails.Builder | |
CreateDrgDetails |
Note: Objects should always be created or deserialized using the CreateDrgDetails.Builder . |
CreateDrgDetails.Builder | |
CreateDrgRouteDistributionDetails |
Details used to create a route distribution.
|
CreateDrgRouteDistributionDetails.Builder | |
CreateDrgRouteTableDetails |
Details used in a request to create a DRG route table.
|
CreateDrgRouteTableDetails.Builder | |
CreateImageDetails |
Either instanceId or imageSourceDetails must be provided in addition to other required
parameters.
|
CreateImageDetails.Builder | |
CreateInstanceConfigurationBase |
Creation details for an instance configuration.
|
CreateInstanceConfigurationDetails |
Details for creating an instance configuration by providing a list of configuration settings.
|
CreateInstanceConfigurationDetails.Builder | |
CreateInstanceConfigurationFromInstanceDetails |
Details for creating an instance configuration using an existing instance as a template.
|
CreateInstanceConfigurationFromInstanceDetails.Builder | |
CreateInstanceConsoleConnectionDetails |
The details for creating a instance console connection.
|
CreateInstanceConsoleConnectionDetails.Builder | |
CreateInstancePoolDetails |
The data to create an instance pool.
|
CreateInstancePoolDetails.Builder | |
CreateInstancePoolPlacementConfigurationDetails |
The location for where an instance pool will place instances.
|
CreateInstancePoolPlacementConfigurationDetails.Builder | |
CreateInternetGatewayDetails |
Note: Objects should always be created or deserialized using the CreateInternetGatewayDetails.Builder . |
CreateInternetGatewayDetails.Builder | |
CreateIPSecConnectionDetails |
Note: Objects should always be created or deserialized using the CreateIPSecConnectionDetails.Builder . |
CreateIPSecConnectionDetails.Builder | |
CreateIPSecConnectionTunnelDetails |
Note: Objects should always be created or deserialized using the CreateIPSecConnectionTunnelDetails.Builder . |
CreateIPSecConnectionTunnelDetails.Builder | |
CreateIPSecTunnelBgpSessionDetails |
Note: Objects should always be created or deserialized using the CreateIPSecTunnelBgpSessionDetails.Builder . |
CreateIPSecTunnelBgpSessionDetails.Builder | |
CreateIPSecTunnelEncryptionDomainDetails |
Request to enable a multi-encryption domain policy on the IPSec tunnel.
|
CreateIPSecTunnelEncryptionDomainDetails.Builder | |
CreateIpv6Details |
Note: Objects should always be created or deserialized using the CreateIpv6Details.Builder . |
CreateIpv6Details.Builder | |
CreateLocalPeeringGatewayDetails |
Note: Objects should always be created or deserialized using the CreateLocalPeeringGatewayDetails.Builder . |
CreateLocalPeeringGatewayDetails.Builder | |
CreateMacsecKey |
Defines the secret
OCIDs held in
Vault that represent the MACsec key.
|
CreateMacsecKey.Builder | |
CreateMacsecProperties |
Properties used to configure MACsec (if capable).
|
CreateMacsecProperties.Builder | |
CreateNatGatewayDetails |
Note: Objects should always be created or deserialized using the CreateNatGatewayDetails.Builder . |
CreateNatGatewayDetails.Builder | |
CreateNetworkSecurityGroupDetails |
Note: Objects should always be created or deserialized using the CreateNetworkSecurityGroupDetails.Builder . |
CreateNetworkSecurityGroupDetails.Builder | |
CreatePrivateIpDetails |
Note: Objects should always be created or deserialized using the CreatePrivateIpDetails.Builder . |
CreatePrivateIpDetails.Builder | |
CreatePublicIpDetails |
Note: Objects should always be created or deserialized using the CreatePublicIpDetails.Builder . |
CreatePublicIpDetails.Builder | |
CreatePublicIpPoolDetails |
The information used to create a public IP pool.
|
CreatePublicIpPoolDetails.Builder | |
CreateRemotePeeringConnectionDetails |
Note: Objects should always be created or deserialized using the CreateRemotePeeringConnectionDetails.Builder . |
CreateRemotePeeringConnectionDetails.Builder | |
CreateRouteTableDetails |
Note: Objects should always be created or deserialized using the CreateRouteTableDetails.Builder . |
CreateRouteTableDetails.Builder | |
CreateSecurityListDetails |
Note: Objects should always be created or deserialized using the CreateSecurityListDetails.Builder . |
CreateSecurityListDetails.Builder | |
CreateServiceGatewayDetails |
Note: Objects should always be created or deserialized using the CreateServiceGatewayDetails.Builder . |
CreateServiceGatewayDetails.Builder | |
CreateSubnetDetails |
Note: Objects should always be created or deserialized using the CreateSubnetDetails.Builder . |
CreateSubnetDetails.Builder | |
CreateVcnDetails |
Note: Objects should always be created or deserialized using the CreateVcnDetails.Builder . |
CreateVcnDetails.Builder | |
CreateVirtualCircuitDetails |
Note: Objects should always be created or deserialized using the CreateVirtualCircuitDetails.Builder . |
CreateVirtualCircuitDetails.Builder | |
CreateVirtualCircuitPublicPrefixDetails |
Note: Objects should always be created or deserialized using the CreateVirtualCircuitPublicPrefixDetails.Builder . |
CreateVirtualCircuitPublicPrefixDetails.Builder | |
CreateVlanDetails |
Note: Objects should always be created or deserialized using the CreateVlanDetails.Builder . |
CreateVlanDetails.Builder | |
CreateVnicDetails |
Contains properties for a VNIC.
|
CreateVnicDetails.Builder | |
CreateVolumeBackupDetails |
Note: Objects should always be created or deserialized using the CreateVolumeBackupDetails.Builder . |
CreateVolumeBackupDetails.Builder | |
CreateVolumeBackupPolicyAssignmentDetails |
Note: Objects should always be created or deserialized using the CreateVolumeBackupPolicyAssignmentDetails.Builder . |
CreateVolumeBackupPolicyAssignmentDetails.Builder | |
CreateVolumeBackupPolicyDetails |
Specifies the properties for creating user defined backup policy.
|
CreateVolumeBackupPolicyDetails.Builder | |
CreateVolumeDetails |
The details of the volume to create.
|
CreateVolumeDetails.Builder | |
CreateVolumeGroupBackupDetails |
Note: Objects should always be created or deserialized using the CreateVolumeGroupBackupDetails.Builder . |
CreateVolumeGroupBackupDetails.Builder | |
CreateVolumeGroupDetails |
Note: Objects should always be created or deserialized using the CreateVolumeGroupDetails.Builder . |
CreateVolumeGroupDetails.Builder | |
CreateVtapDetails |
These details are included in a request to create a virtual test access point (VTAP).
|
CreateVtapDetails.Builder | |
CrossConnect |
For use with Oracle Cloud Infrastructure FastConnect.
|
CrossConnect.Builder | |
CrossConnectGroup |
For use with Oracle Cloud Infrastructure FastConnect.
|
CrossConnectGroup.Builder | |
CrossConnectLocation |
An individual FastConnect location.
|
CrossConnectLocation.Builder | |
CrossConnectMapping |
For use with Oracle Cloud Infrastructure FastConnect.
|
CrossConnectMapping.Builder | |
CrossConnectMappingDetails |
For use with Oracle Cloud Infrastructure FastConnect.
|
CrossConnectMappingDetails.Builder | |
CrossConnectMappingDetailsCollection |
An array of CrossConnectMappingDetails
Note: Objects should always be created or deserialized using the CrossConnectMappingDetailsCollection.Builder . |
CrossConnectMappingDetailsCollection.Builder | |
CrossConnectPortSpeedShape |
An individual port speed level for cross-connects.
|
CrossConnectPortSpeedShape.Builder | |
CrossConnectStatus |
The status of the cross-connect.
|
CrossConnectStatus.Builder | |
DedicatedCapacitySource |
A capacity source of bare metal hosts that is dedicated to a user.
|
DedicatedCapacitySource.Builder | |
DedicatedVmHost |
A dedicated virtual machine host lets you host multiple VM instances on a dedicated server that
is not shared with other tenancies.
|
DedicatedVmHost.Builder | |
DedicatedVmHostInstanceShapeSummary |
The shape used to launch instances associated with the dedicated VM host.
|
DedicatedVmHostInstanceShapeSummary.Builder | |
DedicatedVmHostInstanceSummary |
Condensed instance data when listing instances on a dedicated VM host.
|
DedicatedVmHostInstanceSummary.Builder | |
DedicatedVmHostShapeSummary |
The shape used to launch the dedicated virtual machine (VM) host.
|
DedicatedVmHostShapeSummary.Builder | |
DedicatedVmHostSummary |
A dedicated virtual machine (VM) host lets you host multiple instances on a dedicated server that
is not shared with other tenancies.
|
DedicatedVmHostSummary.Builder | |
DefaultDrgRouteTables |
The default DRG route table for this DRG.
|
DefaultDrgRouteTables.Builder | |
DefaultPhaseOneParameters |
Default phase one parameters.
|
DefaultPhaseOneParameters.Builder | |
DefaultPhaseTwoParameters |
Default phase two parameters.
|
DefaultPhaseTwoParameters.Builder | |
DeleteVirtualCircuitPublicPrefixDetails |
Note: Objects should always be created or deserialized using the DeleteVirtualCircuitPublicPrefixDetails.Builder . |
DeleteVirtualCircuitPublicPrefixDetails.Builder | |
DetachedVolumeAutotunePolicy |
Volume’s performace will be tuned to the lower cost settings once detached.
|
DetachedVolumeAutotunePolicy.Builder | |
DetachInstancePoolInstanceDetails |
An instance that is to be detached from an instance pool.
|
DetachInstancePoolInstanceDetails.Builder | |
DetachLoadBalancerDetails |
Represents a load balancer that is to be detached from an instance pool.
|
DetachLoadBalancerDetails.Builder | |
Device |
Device Path corresponding to the block devices attached to instances having a name and
isAvailable flag.
|
Device.Builder | |
DhcpDnsOption |
DHCP option for specifying how DNS (hostname resolution) is handled in the subnets in the VCN.
|
DhcpDnsOption.Builder | |
DhcpOption |
A single DHCP option according to RFC 1533.
|
DhcpOptions |
A set of DHCP options.
|
DhcpOptions.Builder | |
DhcpSearchDomainOption |
DHCP option for specifying a search domain name for DNS queries.
|
DhcpSearchDomainOption.Builder | |
DpdConfig |
These configuration details are used for dead peer detection (DPD).
|
DpdConfig.Builder | |
Drg |
A dynamic routing gateway (DRG) is a virtual router that provides a path for private network
traffic between networks.
|
Drg.Builder | |
DrgAttachment |
A DRG attachment serves as a link between a DRG and a network resource.
|
DrgAttachment.Builder | |
DrgAttachmentIdDrgRouteDistributionMatchCriteria |
The criteria by which a specific attachment will import routes to the DRG.
|
DrgAttachmentIdDrgRouteDistributionMatchCriteria.Builder | |
DrgAttachmentInfo |
The
DrgAttachmentInfo resource contains the
OCID of the DRG
attachment. |
DrgAttachmentInfo.Builder | |
DrgAttachmentMatchAllDrgRouteDistributionMatchCriteria |
All routes are imported or exported.
|
DrgAttachmentMatchAllDrgRouteDistributionMatchCriteria.Builder | |
DrgAttachmentNetworkCreateDetails |
Note: Objects should always be created or deserialized using the Builder . |
DrgAttachmentNetworkDetails |
Note: Objects should always be created or deserialized using the Builder . |
DrgAttachmentNetworkUpdateDetails |
Note: Objects should always be created or deserialized using the Builder . |
DrgAttachmentTypeDrgRouteDistributionMatchCriteria |
The attachment type from which the DRG will import routes.
|
DrgAttachmentTypeDrgRouteDistributionMatchCriteria.Builder | |
DrgRedundancyStatus |
The redundancy status of the DRG.
|
DrgRedundancyStatus.Builder | |
DrgRouteDistribution |
A route distribution establishes how routes get imported into DRG route tables and exported
through the DRG attachments.
|
DrgRouteDistribution.Builder | |
DrgRouteDistributionMatchCriteria |
The match criteria in a route distribution statement.
|
DrgRouteDistributionStatement |
A single statement within a route distribution.
|
DrgRouteDistributionStatement.Builder | |
DrgRouteRule |
A DRG route rule is a mapping between a destination IP address range and a DRG attachment.
|
DrgRouteRule.Builder | |
DrgRouteTable |
All routing inside the DRG is driven by the contents of DRG route tables.
|
DrgRouteTable.Builder | |
EgressSecurityRule |
A rule for allowing outbound IP packets.
|
EgressSecurityRule.Builder | |
EmulatedVolumeAttachment |
An Emulated volume attachment.
|
EmulatedVolumeAttachment.Builder | |
EncryptionDomainConfig |
Configuration information used by the encryption domain policy.
|
EncryptionDomainConfig.Builder | |
EnumIntegerImageCapabilityDescriptor |
Enum Integer type CapabilityDescriptor
Note: Objects should always be created or deserialized using the EnumIntegerImageCapabilityDescriptor.Builder . |
EnumIntegerImageCapabilityDescriptor.Builder | |
EnumStringImageCapabilitySchemaDescriptor |
Enum String type of ImageCapabilitySchemaDescriptor
Note: Objects should always be created or deserialized using the EnumStringImageCapabilitySchemaDescriptor.Builder . |
EnumStringImageCapabilitySchemaDescriptor.Builder | |
ExportImageDetails |
The destination details for the image export.
|
ExportImageViaObjectStorageTupleDetails |
Note: Objects should always be created or deserialized using the ExportImageViaObjectStorageTupleDetails.Builder . |
ExportImageViaObjectStorageTupleDetails.Builder | |
ExportImageViaObjectStorageUriDetails |
Note: Objects should always be created or deserialized using the ExportImageViaObjectStorageUriDetails.Builder . |
ExportImageViaObjectStorageUriDetails.Builder | |
FastConnectProviderService |
A service offering from a supported provider.
|
FastConnectProviderService.Builder | |
FastConnectProviderServiceKey |
A provider service key and its details.
|
FastConnectProviderServiceKey.Builder | |
FlowLogCaptureFilterRuleDetails |
The set of rules governing what traffic the VCN flow log collects.
|
FlowLogCaptureFilterRuleDetails.Builder | |
GenericBmLaunchInstancePlatformConfig |
The standard platform configuration to be used when launching a bare metal instance.
|
GenericBmLaunchInstancePlatformConfig.Builder | |
GenericBmPlatformConfig |
The standard platform configuration of a bare metal instance.
|
GenericBmPlatformConfig.Builder | |
GetIpInventoryVcnOverlapDetails |
Lists the compartment to find VCN overlap.
|
GetIpInventoryVcnOverlapDetails.Builder | |
GetPublicIpByIpAddressDetails |
IP address of the public IP.
|
GetPublicIpByIpAddressDetails.Builder | |
GetPublicIpByPrivateIpIdDetails |
Details of the private IP that the public IP is assigned to.
|
GetPublicIpByPrivateIpIdDetails.Builder | |
IcmpOptions |
Optional and valid only for ICMP and ICMPv6.
|
IcmpOptions.Builder | |
Image |
A boot disk image for launching an instance.
|
Image.Builder | |
ImageCapabilitySchemaDescriptor |
Image Capability Schema Descriptor is a type of capability for an image.
|
ImageMemoryConstraints |
For a flexible image and shape, the amount of memory supported for instances that use this image.
|
ImageMemoryConstraints.Builder | |
ImageOcpuConstraints |
OCPU options for an image and shape.
|
ImageOcpuConstraints.Builder | |
ImageShapeCompatibilityEntry |
An image and shape that are compatible.
|
ImageShapeCompatibilityEntry.Builder | |
ImageShapeCompatibilitySummary |
Summary information for a compatible image and shape.
|
ImageShapeCompatibilitySummary.Builder | |
ImageSourceDetails |
Note: Objects should always be created or deserialized using the Builder . |
ImageSourceViaObjectStorageTupleDetails |
Note: Objects should always be created or deserialized using the ImageSourceViaObjectStorageTupleDetails.Builder . |
ImageSourceViaObjectStorageTupleDetails.Builder | |
ImageSourceViaObjectStorageUriDetails |
Note: Objects should always be created or deserialized using the ImageSourceViaObjectStorageUriDetails.Builder . |
ImageSourceViaObjectStorageUriDetails.Builder | |
IngressSecurityRule |
A rule for allowing inbound IP packets.
|
IngressSecurityRule.Builder | |
Instance |
A compute host.
|
Instance.Builder | |
InstanceAgentConfig |
Configuration options for the Oracle Cloud Agent software running on the instance.
|
InstanceAgentConfig.Builder | |
InstanceAgentFeatures |
Oracle Cloud Agent features supported on the image.
|
InstanceAgentFeatures.Builder | |
InstanceAgentPluginConfigDetails |
The configuration of plugins associated with this instance.
|
InstanceAgentPluginConfigDetails.Builder | |
InstanceAvailabilityConfig |
Options for defining the availabiity of a VM instance after a maintenance event that impacts the
underlying hardware.
|
InstanceAvailabilityConfig.Builder | |
InstanceConfiguration |
An instance configuration is a template that defines the settings to use when creating Compute
instances.
|
InstanceConfiguration.Builder | |
InstanceConfigurationAmdMilanBmGpuLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal GPU instance with the following
shape: BM.GPU.GM4.8 (also named BM.GPU.A100-v2.8) (the AMD Milan platform).
|
InstanceConfigurationAmdMilanBmGpuLaunchInstancePlatformConfig.Builder | |
InstanceConfigurationAmdMilanBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with one of the following
shapes: BM.Standard.E4.128 or BM.DenseIO.E4.128 (the AMD Milan platform).
|
InstanceConfigurationAmdMilanBmLaunchInstancePlatformConfig.Builder | |
InstanceConfigurationAmdRomeBmGpuLaunchInstancePlatformConfig |
The platform configuration of a bare metal GPU instance that uses the BM.GPU4.8 shape (the AMD
Rome platform).
|
InstanceConfigurationAmdRomeBmGpuLaunchInstancePlatformConfig.Builder | |
InstanceConfigurationAmdRomeBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with the BM.Standard.E3.128
shape (the AMD Rome platform).
|
InstanceConfigurationAmdRomeBmLaunchInstancePlatformConfig.Builder | |
InstanceConfigurationAmdVmLaunchInstancePlatformConfig |
The platform configuration used when launching a virtual machine instance with the AMD platform.
|
InstanceConfigurationAmdVmLaunchInstancePlatformConfig.Builder | |
InstanceConfigurationAttachVnicDetails |
Note: Objects should always be created or deserialized using the InstanceConfigurationAttachVnicDetails.Builder . |
InstanceConfigurationAttachVnicDetails.Builder | |
InstanceConfigurationAttachVolumeDetails |
Volume attachmentDetails.
|
InstanceConfigurationAutotunePolicy |
An autotune policy automatically tunes the volume’s performace based on the type of the policy.
|
InstanceConfigurationAvailabilityConfig |
Options for defining the availabiity of a VM instance after a maintenance event that impacts the
underlying hardware.
|
InstanceConfigurationAvailabilityConfig.Builder | |
InstanceConfigurationBlockVolumeDetails |
Create new block volumes or attach to an existing volume.
|
InstanceConfigurationBlockVolumeDetails.Builder | |
InstanceConfigurationBlockVolumeReplicaDetails |
Contains the details for the block volume replica
Note: Objects should always be created or deserialized using the InstanceConfigurationBlockVolumeReplicaDetails.Builder . |
InstanceConfigurationBlockVolumeReplicaDetails.Builder | |
InstanceConfigurationCreateVnicDetails |
Contains the properties of the VNIC for an instance configuration.
|
InstanceConfigurationCreateVnicDetails.Builder | |
InstanceConfigurationCreateVolumeDetails |
Creates a new block volume.
|
InstanceConfigurationCreateVolumeDetails.Builder | |
InstanceConfigurationDetachedVolumeAutotunePolicy |
Volume’s performace will be tuned to the lower cost settings once detached.
|
InstanceConfigurationDetachedVolumeAutotunePolicy.Builder | |
InstanceConfigurationGenericBmLaunchInstancePlatformConfig |
The standard platform configuration to be used when launching a bare metal instance.
|
InstanceConfigurationGenericBmLaunchInstancePlatformConfig.Builder | |
InstanceConfigurationInstanceDetails |
Note: Objects should always be created or deserialized using the Builder . |
InstanceConfigurationInstanceOptions |
Optional mutable instance options.
|
InstanceConfigurationInstanceOptions.Builder | |
InstanceConfigurationInstanceSourceDetails |
Note: Objects should always be created or deserialized using the Builder . |
InstanceConfigurationInstanceSourceImageFilterDetails |
These are the criteria for selecting an image.
|
InstanceConfigurationInstanceSourceImageFilterDetails.Builder | |
InstanceConfigurationInstanceSourceViaBootVolumeDetails |
Note: Objects should always be created or deserialized using the InstanceConfigurationInstanceSourceViaBootVolumeDetails.Builder . |
InstanceConfigurationInstanceSourceViaBootVolumeDetails.Builder | |
InstanceConfigurationInstanceSourceViaImageDetails |
Note: Objects should always be created or deserialized using the InstanceConfigurationInstanceSourceViaImageDetails.Builder . |
InstanceConfigurationInstanceSourceViaImageDetails.Builder | |
InstanceConfigurationIntelIcelakeBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with the BM.Standard3.64
shape or the BM.Optimized3.36 shape (the Intel Ice Lake platform).
|
InstanceConfigurationIntelIcelakeBmLaunchInstancePlatformConfig.Builder | |
InstanceConfigurationIntelSkylakeBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with one of the following
shapes: BM.Standard2.52, BM.GPU2.2, BM.GPU3.8, or BM.DenseIO2.52 (the Intel Skylake platform).
|
InstanceConfigurationIntelSkylakeBmLaunchInstancePlatformConfig.Builder | |
InstanceConfigurationIntelVmLaunchInstancePlatformConfig |
The platform configuration used when launching a virtual machine instance with the Intel
platform.
|
InstanceConfigurationIntelVmLaunchInstancePlatformConfig.Builder | |
InstanceConfigurationIpv6AddressIpv6SubnetCidrPairDetails |
Optional.
|
InstanceConfigurationIpv6AddressIpv6SubnetCidrPairDetails.Builder | |
InstanceConfigurationIscsiAttachVolumeDetails |
Note: Objects should always be created or deserialized using the InstanceConfigurationIscsiAttachVolumeDetails.Builder . |
InstanceConfigurationIscsiAttachVolumeDetails.Builder | |
InstanceConfigurationLaunchInstanceAgentConfigDetails |
Configuration options for the Oracle Cloud Agent software running on the instance.
|
InstanceConfigurationLaunchInstanceAgentConfigDetails.Builder | |
InstanceConfigurationLaunchInstanceDetails |
Instance launch details for creating an instance from an instance configuration.
|
InstanceConfigurationLaunchInstanceDetails.Builder | |
InstanceConfigurationLaunchInstancePlatformConfig |
The platform configuration requested for the instance.
|
InstanceConfigurationLaunchInstanceShapeConfigDetails |
The shape configuration requested for the instance.
|
InstanceConfigurationLaunchInstanceShapeConfigDetails.Builder | |
InstanceConfigurationLaunchOptions |
Options for tuning the compatibility and performance of VM shapes.
|
InstanceConfigurationLaunchOptions.Builder | |
InstanceConfigurationParavirtualizedAttachVolumeDetails |
Note: Objects should always be created or deserialized using the InstanceConfigurationParavirtualizedAttachVolumeDetails.Builder . |
InstanceConfigurationParavirtualizedAttachVolumeDetails.Builder | |
InstanceConfigurationPerformanceBasedAutotunePolicy |
If a volume is being throttled at the current setting for a certain period of time, auto-tune
will gradually increase the volume’s performance limited up to Maximum VPUs/GB.
|
InstanceConfigurationPerformanceBasedAutotunePolicy.Builder | |
InstanceConfigurationSummary |
Summary information for an instance configuration.
|
InstanceConfigurationSummary.Builder | |
InstanceConfigurationVolumeSourceDetails |
Note: Objects should always be created or deserialized using the Builder . |
InstanceConfigurationVolumeSourceFromVolumeBackupDetails |
Specifies the volume backup.
|
InstanceConfigurationVolumeSourceFromVolumeBackupDetails.Builder | |
InstanceConfigurationVolumeSourceFromVolumeDetails |
Specifies the source volume.
|
InstanceConfigurationVolumeSourceFromVolumeDetails.Builder | |
InstanceConsoleConnection |
The
InstanceConsoleConnection API provides you with console access to Compute instances,
enabling you to troubleshoot malfunctioning instances remotely. |
InstanceConsoleConnection.Builder | |
InstanceCredentials |
The credentials for a particular instance.
|
InstanceCredentials.Builder | |
InstanceMaintenanceEvent |
It is the event in which the maintenance action will be be performed on the customer instance on
the scheduled date and time.
|
InstanceMaintenanceEvent.Builder | |
InstanceMaintenanceEventSummary |
It is the event in which the maintenance action will be be performed on the customer instance on
the scheduled date and time.
|
InstanceMaintenanceEventSummary.Builder | |
InstanceMaintenanceReboot |
The maximum possible date and time that a maintenance reboot can be extended.
|
InstanceMaintenanceReboot.Builder | |
InstanceOptions |
Optional mutable instance options
Note: Objects should always be created or deserialized using the InstanceOptions.Builder . |
InstanceOptions.Builder | |
InstancePool |
An instance pool is a set of instances within the same region that are managed as a group.
|
InstancePool.Builder | |
InstancePoolInstance |
Information about an instance that belongs to an instance pool.
|
InstancePoolInstance.Builder | |
InstancePoolInstanceLoadBalancerBackend |
Represents the load balancer Backend that is configured for an instance pool instance.
|
InstancePoolInstanceLoadBalancerBackend.Builder | |
InstancePoolLoadBalancerAttachment |
Represents a load balancer that is attached to an instance pool.
|
InstancePoolLoadBalancerAttachment.Builder | |
InstancePoolPlacementConfiguration |
The location for where an instance pool will place instances.
|
InstancePoolPlacementConfiguration.Builder | |
InstancePoolPlacementIpv6AddressIpv6SubnetCidrDetails |
Optional.
|
InstancePoolPlacementIpv6AddressIpv6SubnetCidrDetails.Builder | |
InstancePoolPlacementPrimarySubnet |
Details about the IPv6 primary subnet.
|
InstancePoolPlacementPrimarySubnet.Builder | |
InstancePoolPlacementSecondaryVnicSubnet |
The secondary VNIC object for the placement configuration for an instance pool.
|
InstancePoolPlacementSecondaryVnicSubnet.Builder | |
InstancePoolPlacementSubnetDetails |
Base details about the IPv6 subnet.
|
InstancePoolPlacementSubnetDetails.Builder | |
InstancePoolSummary |
Summary information for an instance pool.
|
InstancePoolSummary.Builder | |
InstancePowerActionDetails |
A base object for all types of instance power action requests.
|
InstanceReservationConfig |
Data that defines the capacity configuration.
|
InstanceReservationConfig.Builder | |
InstanceReservationConfigDetails |
A template that contains the settings to use when defining the instance capacity configuration.
|
InstanceReservationConfigDetails.Builder | |
InstanceReservationShapeConfigDetails |
The shape configuration requested when launching instances in a compute capacity reservation.
|
InstanceReservationShapeConfigDetails.Builder | |
InstanceShapeConfig |
The shape configuration for an instance.
|
InstanceShapeConfig.Builder | |
InstanceSourceDetails |
Note: Objects should always be created or deserialized using the Builder . |
InstanceSourceImageFilterDetails |
These are the criteria for selecting an image.
|
InstanceSourceImageFilterDetails.Builder | |
InstanceSourceViaBootVolumeDetails |
Note: Objects should always be created or deserialized using the InstanceSourceViaBootVolumeDetails.Builder . |
InstanceSourceViaBootVolumeDetails.Builder | |
InstanceSourceViaImageDetails |
Note: Objects should always be created or deserialized using the InstanceSourceViaImageDetails.Builder . |
InstanceSourceViaImageDetails.Builder | |
InstanceSummary |
Condensed instance data when listing instances in an instance pool.
|
InstanceSummary.Builder | |
IntelIcelakeBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with the BM.Standard3.64
shape or the BM.Optimized3.36 shape (the Intel Ice Lake platform).
|
IntelIcelakeBmLaunchInstancePlatformConfig.Builder | |
IntelIcelakeBmPlatformConfig |
The platform configuration of a bare metal instance that uses the BM.Standard3.64 shape or the
BM.Optimized3.36 shape (the Intel Ice Lake platform).
|
IntelIcelakeBmPlatformConfig.Builder | |
IntelSkylakeBmLaunchInstancePlatformConfig |
The platform configuration used when launching a bare metal instance with an Intel X7-based
processor (the Intel Skylake platform).
|
IntelSkylakeBmLaunchInstancePlatformConfig.Builder | |
IntelSkylakeBmPlatformConfig |
The platform configuration of a bare metal instance that uses one of the following shapes:
BM.Standard2.52, BM.GPU2.2, BM.GPU3.8, or BM.DenseIO2.52 (the Intel Skylake platform).
|
IntelSkylakeBmPlatformConfig.Builder | |
IntelVmLaunchInstancePlatformConfig |
The platform configuration used when launching a virtual machine instance with the Intel
platform.
|
IntelVmLaunchInstancePlatformConfig.Builder | |
IntelVmPlatformConfig |
The platform configuration of a virtual machine instance that uses the Intel platform.
|
IntelVmPlatformConfig.Builder | |
IntelVmUpdateInstancePlatformConfig |
The platform configuration used when updating a virtual machine instance with the Intel platform.
|
IntelVmUpdateInstancePlatformConfig.Builder | |
InternetGateway |
Represents a router that connects the edge of a VCN with the Internet.
|
InternetGateway.Builder | |
InventoryIpAddressSummary |
Provides the IP address and its corresponding VNIC ID, VNIC name, and DNS hostname.
|
InventoryIpAddressSummary.Builder | |
InventoryResourceSummary |
Lists resources and its properties under a given subnet.
|
InventoryResourceSummary.Builder | |
InventorySubnetCidrBlockSummary |
Lists CIDRs and utilization within a subnet.
|
InventorySubnetCidrBlockSummary.Builder | |
InventorySubnetSummary |
Lists subnet and its associated resources.
|
InventorySubnetSummary.Builder | |
InventoryVcnCidrBlockSummary |
Lists the CIDRs and utilization within a VCN.
|
InventoryVcnCidrBlockSummary.Builder | |
InventoryVcnSummary |
Provides the summary of a VCN’s IP Inventory data under specified compartments.
|
InventoryVcnSummary.Builder | |
Ipam |
An IPAM refers to a group of VCNs, subnets, IP resources and its related properties.
|
Ipam.Builder | |
IpInventoryCidrUtilizationCollection |
The IP Inventory CIDR utilization details of a subnet.
|
IpInventoryCidrUtilizationCollection.Builder | |
IpInventoryCidrUtilizationSummary |
The CIDR utilization details of a subnet.
|
IpInventoryCidrUtilizationSummary.Builder | |
IpInventoryCollection |
The results returned by a
ListIpInventory operation. |
IpInventoryCollection.Builder | |
IpInventorySubnetResourceCollection |
The results returned by a
ListIpInventorySubnet operation. |
IpInventorySubnetResourceCollection.Builder | |
IpInventorySubnetResourceSummary |
Provides the IP Inventory details of a subnet and its associated resources.
|
IpInventorySubnetResourceSummary.Builder | |
IpInventoryVcnOverlapCollection |
The details of the overlapping VCNs and compartments.
|
IpInventoryVcnOverlapCollection.Builder | |
IpInventoryVcnOverlapSummary |
Provides the VCN overlap details.
|
IpInventoryVcnOverlapSummary.Builder | |
IPSecConnection |
A connection between a DRG and CPE.
|
IPSecConnection.Builder | |
IPSecConnectionDeviceConfig |
Deprecated.
|
IPSecConnectionDeviceConfig.Builder | |
IPSecConnectionDeviceStatus |
Deprecated.
|
IPSecConnectionDeviceStatus.Builder | |
IPSecConnectionTunnel |
Information about a single IPSec tunnel in an IPSec connection.
|
IPSecConnectionTunnel.Builder | |
IPSecConnectionTunnelErrorDetails |
Details for an error on an IPSec tunnel.
|
IPSecConnectionTunnelErrorDetails.Builder | |
IPSecConnectionTunnelSharedSecret |
The tunnel’s shared secret (pre-shared key).
|
IPSecConnectionTunnelSharedSecret.Builder | |
IpsecTunnelDrgAttachmentNetworkDetails |
Specifies the IPSec tunnel attached to the DRG.
|
IpsecTunnelDrgAttachmentNetworkDetails.Builder | |
Ipv6 |
An IPv6 is a conceptual term that refers to an IPv6 address and related properties.
|
Ipv6.Builder | |
Ipv6AddressIpv6SubnetCidrPairDetails |
Details to assign an IPv6 subnet prefix and IPv6 address on VNIC creation.
|
Ipv6AddressIpv6SubnetCidrPairDetails.Builder | |
IScsiVolumeAttachment |
An ISCSI volume attachment.
|
IScsiVolumeAttachment.Builder | |
LaunchAttachIScsiVolumeDetails |
Details specific to ISCSI type volume attachments.
|
LaunchAttachIScsiVolumeDetails.Builder | |
LaunchAttachParavirtualizedVolumeDetails |
Details specific to PV type volume attachments.
|
LaunchAttachParavirtualizedVolumeDetails.Builder | |
LaunchAttachVolumeDetails |
The details of the volume to attach.
|
LaunchCreateVolumeDetails |
Define a volume that will be created and attached or attached to an instance on creation.
|
LaunchCreateVolumeFromAttributes |
The details of the volume to create for CreateVolume operation.
|
LaunchCreateVolumeFromAttributes.Builder | |
LaunchInstanceAgentConfigDetails |
Configuration options for the Oracle Cloud Agent software running on the instance.
|
LaunchInstanceAgentConfigDetails.Builder | |
LaunchInstanceAvailabilityConfigDetails |
Options for VM migration during infrastructure maintenance events and for defining the
availability of a VM instance after a maintenance event that impacts the underlying hardware.
|
LaunchInstanceAvailabilityConfigDetails.Builder | |
LaunchInstanceDetails |
Instance launch details.
|
LaunchInstanceDetails.Builder | |
LaunchInstancePlatformConfig |
The platform configuration requested for the instance.
|
LaunchInstanceShapeConfigDetails |
The shape configuration requested for the instance.
|
LaunchInstanceShapeConfigDetails.Builder | |
LaunchOptions |
Options for tuning the compatibility and performance of VM shapes.
|
LaunchOptions.Builder | |
LetterOfAuthority |
The Letter of Authority for the cross-connect.
|
LetterOfAuthority.Builder | |
ListIpInventoryDetails |
Required input parameters for retrieving IP Inventory data within the specified compartments of a
region.
|
ListIpInventoryDetails.Builder | |
LocalPeeringGateway |
A local peering gateway (LPG) is an object on a VCN that lets that VCN peer with another VCN in
the same region.
|
LocalPeeringGateway.Builder | |
LoopBackDrgAttachmentNetworkDetails |
Specifies the loopback attachment on the DRG.
|
LoopBackDrgAttachmentNetworkDetails.Builder | |
MacsecKey |
An object defining the Secrets-in-Vault OCIDs representing the MACsec key.
|
MacsecKey.Builder | |
MacsecProperties |
Properties used for MACsec (if capable).
|
MacsecProperties.Builder | |
MeasuredBootEntry |
One Trusted Platform Module (TPM) Platform Configuration Register (PCR) entry.
|
MeasuredBootEntry.Builder | |
MeasuredBootReport |
The measured boot report for a shielded instance.
|
MeasuredBootReport.Builder | |
MeasuredBootReportMeasurements |
A list of Trusted Platform Module (TPM) Platform Configuration Register (PCR) entries.
|
MeasuredBootReportMeasurements.Builder | |
MemberReplica |
OCIDs for the volume replicas in this volume group replica.
|
MemberReplica.Builder | |
ModifyVcnCidrDetails |
Details for updating a CIDR block.
|
ModifyVcnCidrDetails.Builder | |
MultipathDevice |
Secondary multipath device, it uses the charUsername and chapSecret from primary volume
attachment
Note: Objects should always be created or deserialized using the MultipathDevice.Builder . |
MultipathDevice.Builder | |
NatGateway |
A NAT (Network Address Translation) gateway, which represents a router that lets instances
without public IPs contact the public internet without exposing the instance to inbound internet
traffic.
|
NatGateway.Builder | |
NetworkingTopology |
Defines the representation of a virtual network topology for a region.
|
NetworkingTopology.Builder | |
NetworkSecurityGroup |
A network security group (NSG) provides virtual firewall rules for a specific set of
Vnic in a VCN. |
NetworkSecurityGroup.Builder | |
NetworkSecurityGroupVnic |
Information about a VNIC that belongs to a network security group.
|
NetworkSecurityGroupVnic.Builder | |
ParavirtualizedVolumeAttachment |
A paravirtualized volume attachment.
|
ParavirtualizedVolumeAttachment.Builder | |
PeerRegionForRemotePeering |
Details about a region that supports remote VCN peering.
|
PeerRegionForRemotePeering.Builder | |
PercentageOfCoresEnabledOptions |
Configuration options for the percentage of cores enabled.
|
PercentageOfCoresEnabledOptions.Builder | |
PerformanceBasedAutotunePolicy |
If a volume is being throttled at the current setting for a certain period of time, auto-tune
will gradually increase the volume’s performance limited up to Maximum VPUs/GB.
|
PerformanceBasedAutotunePolicy.Builder | |
PhaseOneConfigDetails |
Configuration details for IKE phase one (ISAKMP) configuration parameters.
|
PhaseOneConfigDetails.Builder | |
PhaseTwoConfigDetails |
Configuration details for IPSec phase two configuration parameters.
|
PhaseTwoConfigDetails.Builder | |
PlatformConfig |
The platform configuration for the instance.
|
PortRange |
Note: Objects should always be created or deserialized using the PortRange.Builder . |
PortRange.Builder | |
PreemptibleInstanceConfigDetails |
Configuration options for preemptible instances.
|
PreemptibleInstanceConfigDetails.Builder | |
PreemptionAction |
The action to run when the preemptible instance is interrupted for eviction.
|
PrivateIp |
A private IP is a conceptual term that refers to an IPv4 private IP address and related
properties.
|
PrivateIp.Builder | |
PublicIp |
A public IP is a conceptual term that refers to a public IP address and related properties.
|
PublicIp.Builder | |
PublicIpPool |
A public IP pool is a set of public IP addresses represented as one or more IPv4 CIDR blocks.
|
PublicIpPool.Builder | |
PublicIpPoolCollection |
Results of a
ListPublicIpPool operation. |
PublicIpPoolCollection.Builder | |
PublicIpPoolSummary |
Summary information about a public IP pool.
|
PublicIpPoolSummary.Builder | |
RebootMigrateActionDetails |
Parameters for the
rebootMigrate instanceAction . |
RebootMigrateActionDetails.Builder | |
RemotePeeringConnection |
A remote peering connection (RPC) is an object on a DRG that lets the VCN that is attached to the
DRG peer with a VCN in a different region.
|
RemotePeeringConnection.Builder | |
RemotePeeringConnectionDrgAttachmentNetworkDetails |
Specifies the DRG attachment to another DRG.
|
RemotePeeringConnectionDrgAttachmentNetworkDetails.Builder | |
RemoveDrgRouteDistributionStatementsDetails |
Details request to remove statements from a route distribution.
|
RemoveDrgRouteDistributionStatementsDetails.Builder | |
RemoveDrgRouteRulesDetails |
Details used in a request to remove static routes from a DRG route table.
|
RemoveDrgRouteRulesDetails.Builder | |
RemoveNetworkSecurityGroupSecurityRulesDetails |
Note: Objects should always be created or deserialized using the RemoveNetworkSecurityGroupSecurityRulesDetails.Builder . |
RemoveNetworkSecurityGroupSecurityRulesDetails.Builder | |
RemovePublicIpPoolCapacityDetails |
The information needed to remove capacity from a public IP pool.
|
RemovePublicIpPoolCapacityDetails.Builder | |
RemoveSubnetIpv6CidrDetails |
Details object for removing an IPv6 prefix from a subnet.
|
RemoveSubnetIpv6CidrDetails.Builder | |
RemoveVcnCidrDetails |
Details for removing a CIDR block from a VCN.
|
RemoveVcnCidrDetails.Builder | |
RemoveVcnIpv6CidrDetails |
Details used when removing ULA or private IPv6 prefix or an IPv6 GUA assigned by Oracle or
BYOIPv6 prefix.
|
RemoveVcnIpv6CidrDetails.Builder | |
ResetActionDetails |
Parameters for the
reset instanceAction . |
ResetActionDetails.Builder | |
RouteRule |
A mapping between a destination IP address range and a virtual device to route matching packets
to (a target).
|
RouteRule.Builder | |
RouteTable |
A collection of
RouteRule objects, which are used to route packets based on destination
IP to a particular network entity. |
RouteTable.Builder | |
SecurityList |
A set of virtual firewall rules for your VCN.
|
SecurityList.Builder | |
SecurityRule |
A security rule is one of the items in a
NetworkSecurityGroup . |
SecurityRule.Builder | |
Service |
An object that represents one or multiple Oracle services that you can enable for a
ServiceGateway . |
Service.Builder | |
ServiceGateway |
Represents a router that lets your VCN privately access specific Oracle services such as Object
Storage without exposing the VCN to the public internet.
|
ServiceGateway.Builder | |
ServiceIdRequestDetails |
Note: Objects should always be created or deserialized using the ServiceIdRequestDetails.Builder . |
ServiceIdRequestDetails.Builder | |
ServiceIdResponseDetails |
Note: Objects should always be created or deserialized using the ServiceIdResponseDetails.Builder . |
ServiceIdResponseDetails.Builder | |
Shape |
A compute instance shape that can be used in
launchInstance . |
Shape.Builder | |
ShapeAccessControlServiceEnabledPlatformOptions |
Configuration options for the Access Control Service.
|
ShapeAccessControlServiceEnabledPlatformOptions.Builder | |
ShapeAlternativeObject |
The shape that Oracle recommends you to use an alternative to the current shape.
|
ShapeAlternativeObject.Builder | |
ShapeInputOutputMemoryManagementUnitEnabledPlatformOptions |
Configuration options for the input-output memory management unit (IOMMU).
|
ShapeInputOutputMemoryManagementUnitEnabledPlatformOptions.Builder | |
ShapeMaxVnicAttachmentOptions |
For a flexible shape, the number of VNIC attachments that are available for instances that use
this shape.
|
ShapeMaxVnicAttachmentOptions.Builder | |
ShapeMeasuredBootOptions |
Configuration options for the Measured Boot feature.
|
ShapeMeasuredBootOptions.Builder | |
ShapeMemoryEncryptionOptions |
Configuration options for memory encryption.
|
ShapeMemoryEncryptionOptions.Builder | |
ShapeMemoryOptions |
For a flexible shape, the amount of memory available for instances that use this shape.
|
ShapeMemoryOptions.Builder | |
ShapeNetworkingBandwidthOptions |
For a flexible shape, the amount of networking bandwidth available for instances that use this
shape.
|
ShapeNetworkingBandwidthOptions.Builder | |
ShapeNumaNodesPerSocketPlatformOptions |
Configuration options for NUMA nodes per socket.
|
ShapeNumaNodesPerSocketPlatformOptions.Builder | |
ShapeOcpuOptions |
For a flexible shape, the number of OCPUs available for instances that use this shape.
|
ShapeOcpuOptions.Builder | |
ShapePlatformConfigOptions |
The list of supported platform configuration options for this shape.
|
ShapePlatformConfigOptions.Builder | |
ShapeSecureBootOptions |
Configuration options for Secure Boot.
|
ShapeSecureBootOptions.Builder | |
ShapeSymmetricMultiThreadingEnabledPlatformOptions |
Configuration options for symmetric multithreading (also called simultaneous multithreading or
SMT).
|
ShapeSymmetricMultiThreadingEnabledPlatformOptions.Builder | |
ShapeTrustedPlatformModuleOptions |
Configuration options for the Trusted Platform Module (TPM).
|
ShapeTrustedPlatformModuleOptions.Builder | |
ShapeVirtualInstructionsEnabledPlatformOptions |
Configuration options for the virtualization instructions.
|
ShapeVirtualInstructionsEnabledPlatformOptions.Builder | |
SoftResetActionDetails |
Parameters for the
softReset instanceAction . |
SoftResetActionDetails.Builder | |
Subnet |
A logical subdivision of a VCN.
|
Subnet.Builder | |
SubnetTopology |
Defines the visualization of a subnet in a VCN.
|
SubnetTopology.Builder | |
TcpOptions |
Optional and valid only for TCP.
|
TcpOptions.Builder | |
TerminatePreemptionAction |
Terminates the preemptible instance when it is interrupted for eviction.
|
TerminatePreemptionAction.Builder | |
Topology |
Defines the representation of a virtual network topology.
|
TopologyAssociatedWithEntityRelationship |
Defines the
AssociatedWith relationship between virtual network topology entities. |
TopologyAssociatedWithEntityRelationship.Builder | |
TopologyAssociatedWithRelationshipDetails |
Defines association details for an
associatedWith relationship. |
TopologyAssociatedWithRelationshipDetails.Builder | |
TopologyContainsEntityRelationship |
Defines the
contains relationship between virtual network topology entities. |
TopologyContainsEntityRelationship.Builder | |
TopologyEntityRelationship |
Defines the relationship between Virtual Network topology entities.
|
TopologyRoutesToEntityRelationship |
Defines the
routesTo relationship between virtual network topology entities. |
TopologyRoutesToEntityRelationship.Builder | |
TopologyRoutesToRelationshipDetails |
Defines route rule details for a
routesTo relationship. |
TopologyRoutesToRelationshipDetails.Builder | |
TunnelConfig |
Deprecated.
|
TunnelConfig.Builder | |
TunnelCpeDeviceConfig |
The set of CPE configuration answers for the tunnel, which the customer provides in
updateTunnelCpeDeviceConfig . |
TunnelCpeDeviceConfig.Builder | |
TunnelPhaseOneDetails |
IPSec tunnel details specific to ISAKMP phase one.
|
TunnelPhaseOneDetails.Builder | |
TunnelPhaseTwoDetails |
IPsec tunnel detail information specific to phase two.
|
TunnelPhaseTwoDetails.Builder | |
TunnelRouteSummary |
A summary of the routes advertised to and received from the on-premises network.
|
TunnelRouteSummary.Builder | |
TunnelSecurityAssociationSummary |
A summary of the IPSec tunnel security association details.
|
TunnelSecurityAssociationSummary.Builder | |
TunnelStatus |
Deprecated.
|
TunnelStatus.Builder | |
UdpOptions |
Optional and valid only for UDP.
|
UdpOptions.Builder | |
UpdateBootVolumeBackupDetails |
Note: Objects should always be created or deserialized using the UpdateBootVolumeBackupDetails.Builder . |
UpdateBootVolumeBackupDetails.Builder | |
UpdateBootVolumeDetails |
Note: Objects should always be created or deserialized using the UpdateBootVolumeDetails.Builder . |
UpdateBootVolumeDetails.Builder | |
UpdateBootVolumeKmsKeyDetails |
Note: Objects should always be created or deserialized using the UpdateBootVolumeKmsKeyDetails.Builder . |
UpdateBootVolumeKmsKeyDetails.Builder | |
UpdateByoipRangeDetails |
The information used to update a
ByoipRange resource. |
UpdateByoipRangeDetails.Builder | |
UpdateCapacitySourceDetails |
A capacity source of bare metal hosts.
|
UpdateCaptureFilterDetails |
These details can be included in a request to update a capture filter.
|
UpdateCaptureFilterDetails.Builder | |
UpdateClusterNetworkDetails |
The data to update a cluster network with instance
pools.
|
UpdateClusterNetworkDetails.Builder | |
UpdateClusterNetworkInstancePoolDetails |
The data to update an instance pool within a cluster network.
|
UpdateClusterNetworkInstancePoolDetails.Builder | |
UpdateComputeCapacityReservationDetails |
Details for updating the compute capacity reservation.
|
UpdateComputeCapacityReservationDetails.Builder | |
UpdateComputeCapacityTopologyDetails |
The details for updating the compute capacity topology.
|
UpdateComputeCapacityTopologyDetails.Builder | |
UpdateComputeClusterDetails |
The data to update a compute cluster.
|
UpdateComputeClusterDetails.Builder | |
UpdateComputeImageCapabilitySchemaDetails |
Create Image Capability Schema for an image.
|
UpdateComputeImageCapabilitySchemaDetails.Builder | |
UpdateConsoleHistoryDetails |
Note: Objects should always be created or deserialized using the UpdateConsoleHistoryDetails.Builder . |
UpdateConsoleHistoryDetails.Builder | |
UpdateCpeDetails |
Note: Objects should always be created or deserialized using the UpdateCpeDetails.Builder . |
UpdateCpeDetails.Builder | |
UpdateCrossConnectDetails |
Update a CrossConnect
Note: Objects should always be created or deserialized using the UpdateCrossConnectDetails.Builder . |
UpdateCrossConnectDetails.Builder | |
UpdateCrossConnectGroupDetails |
Note: Objects should always be created or deserialized using the UpdateCrossConnectGroupDetails.Builder . |
UpdateCrossConnectGroupDetails.Builder | |
UpdateDedicatedCapacitySourceDetails |
A capacity source of bare metal hosts that is dedicated to a user.
|
UpdateDedicatedCapacitySourceDetails.Builder | |
UpdateDedicatedVmHostDetails |
Details for updating the dedicated virtual machine host details.
|
UpdateDedicatedVmHostDetails.Builder | |
UpdateDhcpDetails |
Note: Objects should always be created or deserialized using the UpdateDhcpDetails.Builder . |
UpdateDhcpDetails.Builder | |
UpdatedNetworkSecurityGroupSecurityRules |
Note: Objects should always be created or deserialized using the UpdatedNetworkSecurityGroupSecurityRules.Builder . |
UpdatedNetworkSecurityGroupSecurityRules.Builder | |
UpdateDrgAttachmentDetails |
Note: Objects should always be created or deserialized using the UpdateDrgAttachmentDetails.Builder . |
UpdateDrgAttachmentDetails.Builder | |
UpdateDrgDetails |
Note: Objects should always be created or deserialized using the UpdateDrgDetails.Builder . |
UpdateDrgDetails.Builder | |
UpdateDrgRouteDistributionDetails |
Details used in a request to update a route distribution.
|
UpdateDrgRouteDistributionDetails.Builder | |
UpdateDrgRouteDistributionStatementDetails |
Route distribution statements to update in the route distribution.
|
UpdateDrgRouteDistributionStatementDetails.Builder | |
UpdateDrgRouteDistributionStatementsDetails |
Details request to update statements in a route distribution.
|
UpdateDrgRouteDistributionStatementsDetails.Builder | |
UpdateDrgRouteRuleDetails |
Details used to update a route rule in the DRG route table.
|
UpdateDrgRouteRuleDetails.Builder | |
UpdateDrgRouteRulesDetails |
Details used to update route rules in a DRG route table.
|
UpdateDrgRouteRulesDetails.Builder | |
UpdateDrgRouteTableDetails |
Details used in a request to update a DRG route table.
|
UpdateDrgRouteTableDetails.Builder | |
UpdateImageDetails |
Note: Objects should always be created or deserialized using the UpdateImageDetails.Builder . |
UpdateImageDetails.Builder | |
UpdateInstanceAgentConfigDetails |
Configuration options for the Oracle Cloud Agent software running on the instance.
|
UpdateInstanceAgentConfigDetails.Builder | |
UpdateInstanceAvailabilityConfigDetails |
Options for defining the availability of a VM instance after a maintenance event that impacts the
underlying hardware, including whether to live migrate supported VM instances when possible
without sending a prior customer notification.
|
UpdateInstanceAvailabilityConfigDetails.Builder | |
UpdateInstanceConfigurationDetails |
Note: Objects should always be created or deserialized using the UpdateInstanceConfigurationDetails.Builder . |
UpdateInstanceConfigurationDetails.Builder | |
UpdateInstanceConsoleConnectionDetails |
Specifies the properties for updating tags for an instance console connection.
|
UpdateInstanceConsoleConnectionDetails.Builder | |
UpdateInstanceDetails |
Note: Objects should always be created or deserialized using the UpdateInstanceDetails.Builder . |
UpdateInstanceDetails.Builder | |
UpdateInstanceMaintenanceEventDetails |
Specifies the properties for updating maintenance due date.
|
UpdateInstanceMaintenanceEventDetails.Builder | |
UpdateInstancePlatformConfig |
The platform configuration to be updated for the instance.
|
UpdateInstancePoolDetails |
The data to update an instance pool.
|
UpdateInstancePoolDetails.Builder | |
UpdateInstancePoolPlacementConfigurationDetails |
The location for where an instance pool will place instances.
|
UpdateInstancePoolPlacementConfigurationDetails.Builder | |
UpdateInstanceShapeConfigDetails |
The shape configuration requested for the instance.
|
UpdateInstanceShapeConfigDetails.Builder | |
UpdateInstanceSourceDetails |
The details for updating the instance source.
|
UpdateInstanceSourceViaBootVolumeDetails |
The details for updating the instance source from an existing boot volume.
|
UpdateInstanceSourceViaBootVolumeDetails.Builder | |
UpdateInstanceSourceViaImageDetails |
The details for updating the instance source from an image.
|
UpdateInstanceSourceViaImageDetails.Builder | |
UpdateInternetGatewayDetails |
Note: Objects should always be created or deserialized using the UpdateInternetGatewayDetails.Builder . |
UpdateInternetGatewayDetails.Builder | |
UpdateIPSecConnectionDetails |
Note: Objects should always be created or deserialized using the UpdateIPSecConnectionDetails.Builder . |
UpdateIPSecConnectionDetails.Builder | |
UpdateIPSecConnectionTunnelDetails |
Note: Objects should always be created or deserialized using the UpdateIPSecConnectionTunnelDetails.Builder . |
UpdateIPSecConnectionTunnelDetails.Builder | |
UpdateIPSecConnectionTunnelSharedSecretDetails |
Note: Objects should always be created or deserialized using the UpdateIPSecConnectionTunnelSharedSecretDetails.Builder . |
UpdateIPSecConnectionTunnelSharedSecretDetails.Builder | |
UpdateIPSecTunnelBgpSessionDetails |
Note: Objects should always be created or deserialized using the UpdateIPSecTunnelBgpSessionDetails.Builder . |
UpdateIPSecTunnelBgpSessionDetails.Builder | |
UpdateIPSecTunnelEncryptionDomainDetails |
Request to update a multi-encryption domain policy on the IPSec tunnel.
|
UpdateIPSecTunnelEncryptionDomainDetails.Builder | |
UpdateIpv6Details |
Note: Objects should always be created or deserialized using the UpdateIpv6Details.Builder . |
UpdateIpv6Details.Builder | |
UpdateLaunchOptions |
Options for tuning the compatibility and performance of VM shapes.
|
UpdateLaunchOptions.Builder | |
UpdateLocalPeeringGatewayDetails |
Note: Objects should always be created or deserialized using the UpdateLocalPeeringGatewayDetails.Builder . |
UpdateLocalPeeringGatewayDetails.Builder | |
UpdateMacsecKey |
An object defining the OCID of the Secret held in Vault that represent the MACsec key.
|
UpdateMacsecKey.Builder | |
UpdateMacsecProperties |
Properties used to update MACsec settings.
|
UpdateMacsecProperties.Builder | |
UpdateNatGatewayDetails |
Note: Objects should always be created or deserialized using the UpdateNatGatewayDetails.Builder . |
UpdateNatGatewayDetails.Builder | |
UpdateNetworkSecurityGroupDetails |
Note: Objects should always be created or deserialized using the UpdateNetworkSecurityGroupDetails.Builder . |
UpdateNetworkSecurityGroupDetails.Builder | |
UpdateNetworkSecurityGroupSecurityRulesDetails |
Note: Objects should always be created or deserialized using the UpdateNetworkSecurityGroupSecurityRulesDetails.Builder . |
UpdateNetworkSecurityGroupSecurityRulesDetails.Builder | |
UpdatePrivateIpDetails |
Note: Objects should always be created or deserialized using the UpdatePrivateIpDetails.Builder . |
UpdatePrivateIpDetails.Builder | |
UpdatePublicIpDetails |
Note: Objects should always be created or deserialized using the UpdatePublicIpDetails.Builder . |
UpdatePublicIpDetails.Builder | |
UpdatePublicIpPoolDetails |
The data to update for a public IP pool.
|
UpdatePublicIpPoolDetails.Builder | |
UpdateRemotePeeringConnectionDetails |
Note: Objects should always be created or deserialized using the UpdateRemotePeeringConnectionDetails.Builder . |
UpdateRemotePeeringConnectionDetails.Builder | |
UpdateRouteTableDetails |
Note: Objects should always be created or deserialized using the UpdateRouteTableDetails.Builder . |
UpdateRouteTableDetails.Builder | |
UpdateSecurityListDetails |
Note: Objects should always be created or deserialized using the UpdateSecurityListDetails.Builder . |
UpdateSecurityListDetails.Builder | |
UpdateSecurityRuleDetails |
A rule for allowing inbound (
direction = INGRESS) or outbound (direction = EGRESS)
IP packets. |
UpdateSecurityRuleDetails.Builder | |
UpdateServiceGatewayDetails |
Note: Objects should always be created or deserialized using the UpdateServiceGatewayDetails.Builder . |
UpdateServiceGatewayDetails.Builder | |
UpdateSubnetDetails |
Note: Objects should always be created or deserialized using the UpdateSubnetDetails.Builder . |
UpdateSubnetDetails.Builder | |
UpdateTunnelCpeDeviceConfigDetails |
Note: Objects should always be created or deserialized using the UpdateTunnelCpeDeviceConfigDetails.Builder . |
UpdateTunnelCpeDeviceConfigDetails.Builder | |
UpdateVcnDetails |
Note: Objects should always be created or deserialized using the UpdateVcnDetails.Builder . |
UpdateVcnDetails.Builder | |
UpdateVirtualCircuitDetails |
Note: Objects should always be created or deserialized using the UpdateVirtualCircuitDetails.Builder . |
UpdateVirtualCircuitDetails.Builder | |
UpdateVlanDetails |
Note: Objects should always be created or deserialized using the UpdateVlanDetails.Builder . |
UpdateVlanDetails.Builder | |
UpdateVnicDetails |
Note: Objects should always be created or deserialized using the UpdateVnicDetails.Builder . |
UpdateVnicDetails.Builder | |
UpdateVolumeAttachmentDetails |
details for updating a volume attachment.
|
UpdateVolumeAttachmentDetails.Builder | |
UpdateVolumeBackupDetails |
Note: Objects should always be created or deserialized using the UpdateVolumeBackupDetails.Builder . |
UpdateVolumeBackupDetails.Builder | |
UpdateVolumeBackupPolicyDetails |
Specifies the properties for updating a user defined backup policy.
|
UpdateVolumeBackupPolicyDetails.Builder | |
UpdateVolumeDetails |
Note: Objects should always be created or deserialized using the UpdateVolumeDetails.Builder . |
UpdateVolumeDetails.Builder | |
UpdateVolumeGroupBackupDetails |
Note: Objects should always be created or deserialized using the UpdateVolumeGroupBackupDetails.Builder . |
UpdateVolumeGroupBackupDetails.Builder | |
UpdateVolumeGroupDetails |
Note: Objects should always be created or deserialized using the UpdateVolumeGroupDetails.Builder . |
UpdateVolumeGroupDetails.Builder | |
UpdateVolumeKmsKeyDetails |
Note: Objects should always be created or deserialized using the UpdateVolumeKmsKeyDetails.Builder . |
UpdateVolumeKmsKeyDetails.Builder | |
UpdateVtapDetails |
These details can be included in a request to update a virtual test access point (VTAP).
|
UpdateVtapDetails.Builder | |
UpgradeStatus |
The upgrade status of a DRG.
|
UpgradeStatus.Builder | |
Vcn |
A virtual cloud network (VCN).
|
Vcn.Builder | |
VcnDnsResolverAssociation |
The information about the VCN and the DNS resolver in the association.
|
VcnDnsResolverAssociation.Builder | |
VcnDrgAttachmentNetworkCreateDetails |
Specifies the VCN Attachment
Note: Objects should always be created or deserialized using the VcnDrgAttachmentNetworkCreateDetails.Builder . |
VcnDrgAttachmentNetworkCreateDetails.Builder | |
VcnDrgAttachmentNetworkDetails |
Specifies details within the VCN.
|
VcnDrgAttachmentNetworkDetails.Builder | |
VcnDrgAttachmentNetworkUpdateDetails |
Specifies the update details for the VCN attachment.
|
VcnDrgAttachmentNetworkUpdateDetails.Builder | |
VcnTopology |
Defines the representation of a virtual network topology for a VCN.
|
VcnTopology.Builder | |
VirtualCircuit |
For use with Oracle Cloud Infrastructure FastConnect.
|
VirtualCircuit.Builder | |
VirtualCircuitAssociatedTunnelDetails |
Detailed private tunnel info associated with the virtual circuit.
|
VirtualCircuitAssociatedTunnelDetails.Builder | |
VirtualCircuitBandwidthShape |
An individual bandwidth level for virtual circuits.
|
VirtualCircuitBandwidthShape.Builder | |
VirtualCircuitDrgAttachmentNetworkDetails |
Specifies the virtual circuit attached to the DRG.
|
VirtualCircuitDrgAttachmentNetworkDetails.Builder | |
VirtualCircuitPublicPrefix |
A public IP prefix and its details.
|
VirtualCircuitPublicPrefix.Builder | |
VirtualCircuitRedundancyMetadata |
Redundancy level details of the virtual circuit
Note: Objects should always be created or deserialized using the VirtualCircuitRedundancyMetadata.Builder . |
VirtualCircuitRedundancyMetadata.Builder | |
Vlan |
A resource to be used only with the Oracle Cloud VMware Solution.
|
Vlan.Builder | |
Vnic |
A virtual network interface card.
|
Vnic.Builder | |
VnicAttachment |
Represents an attachment between a VNIC and an instance.
|
VnicAttachment.Builder | |
Volume |
A detachable block volume device that allows you to dynamically expand the storage capacity of an
instance.
|
Volume.Builder | |
VolumeAttachment |
A base object for all types of attachments between a storage volume and an instance.
|
VolumeBackup |
A point-in-time copy of a volume that can then be used to create a new block volume or recover a
block volume.
|
VolumeBackup.Builder | |
VolumeBackupPolicy |
A policy for automatically creating volume backups according to a recurring schedule.
|
VolumeBackupPolicy.Builder | |
VolumeBackupPolicyAssignment |
Specifies the volume that the volume backup policy is assigned to.
|
VolumeBackupPolicyAssignment.Builder | |
VolumeBackupSchedule |
Defines the backup frequency and retention period for a volume backup policy.
|
VolumeBackupSchedule.Builder | |
VolumeGroup |
Specifies a volume group which is a collection of volumes.
|
VolumeGroup.Builder | |
VolumeGroupBackup |
A point-in-time copy of a volume group that can then be used to create a new volume group or
restore a volume group.
|
VolumeGroupBackup.Builder | |
VolumeGroupReplica |
An asynchronous replica of a volume group that can then be used to create a new volume group or
recover a volume group.
|
VolumeGroupReplica.Builder | |
VolumeGroupReplicaDetails |
Contains the details for the volume group replica.
|
VolumeGroupReplicaDetails.Builder | |
VolumeGroupReplicaInfo |
Information about the volume group replica in the destination availability domain.
|
VolumeGroupReplicaInfo.Builder | |
VolumeGroupSourceDetails |
Specifies the source for a volume group.
|
VolumeGroupSourceFromVolumeGroupBackupDetails |
Specifies the volume group backup to restore from.
|
VolumeGroupSourceFromVolumeGroupBackupDetails.Builder | |
VolumeGroupSourceFromVolumeGroupDetails |
Specifies the volume group to clone from.
|
VolumeGroupSourceFromVolumeGroupDetails.Builder | |
VolumeGroupSourceFromVolumeGroupReplicaDetails |
Specifies the source volume replica which the volume group will be created from.
|
VolumeGroupSourceFromVolumeGroupReplicaDetails.Builder | |
VolumeGroupSourceFromVolumesDetails |
Specifies the volumes in a volume group.
|
VolumeGroupSourceFromVolumesDetails.Builder | |
VolumeKmsKey |
The Vault service master encryption key associated with this volume.
|
VolumeKmsKey.Builder | |
VolumeSourceDetails |
Specifies the volume source details for a new Block volume.
|
VolumeSourceFromBlockVolumeReplicaDetails |
Specifies the source block volume replica which the block volume will be created from.
|
VolumeSourceFromBlockVolumeReplicaDetails.Builder | |
VolumeSourceFromVolumeBackupDeltaDetails |
Specifies the volume backups (first & second) and block size in bytes.
|
VolumeSourceFromVolumeBackupDeltaDetails.Builder | |
VolumeSourceFromVolumeBackupDetails |
Specifies the volume backup.
|
VolumeSourceFromVolumeBackupDetails.Builder | |
VolumeSourceFromVolumeDetails |
Specifies the source volume.
|
VolumeSourceFromVolumeDetails.Builder | |
Vtap |
A virtual test access point (VTAP) provides a way to mirror all traffic from a designated source
to a selected target in order to facilitate troubleshooting, security analysis, and data
monitoring.
|
Vtap.Builder | |
VtapCaptureFilterRuleDetails |
This resource contains the rules governing what traffic a VTAP mirrors.
|
VtapCaptureFilterRuleDetails.Builder |
Enum | Description |
---|---|
AddDrgRouteDistributionStatementDetails.Action |
Accept: import/export the route “as is”
|
AddDrgRouteRuleDetails.DestinationType |
Type of destination for the rule.
|
AddressType |
Address type of the CIDR/IP within a VCN or subnet
|
AddSecurityRuleDetails.DestinationType |
Type of destination for the rule.
|
AddSecurityRuleDetails.Direction |
Direction of the security rule.
|
AddSecurityRuleDetails.SourceType |
Type of source for the rule.
|
AmdMilanBmGpuLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
AmdMilanBmGpuPlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
AmdMilanBmLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
AmdMilanBmPlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
AmdRomeBmGpuLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
AmdRomeBmGpuPlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
AmdRomeBmLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
AmdRomeBmPlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
AppCatalogListingResourceVersion.AllowedActions | |
AutotunePolicy.AutotuneType |
This specifies the type of autotunes supported by OCI.
|
BgpSessionInfo.BgpIpv6State |
The state of the BGP IPv6 session.
|
BgpSessionInfo.BgpState |
The state of the BGP session.
|
BlockVolumeReplica.LifecycleState |
The current state of a block volume replica.
|
BootVolume.LifecycleState |
The current state of a boot volume.
|
BootVolumeAttachment.LifecycleState |
The current state of the boot volume attachment.
|
BootVolumeBackup.LifecycleState |
The current state of a boot volume backup.
|
BootVolumeBackup.SourceType |
Specifies whether the backup was created manually, or via scheduled backup policy.
|
BootVolumeBackup.Type |
The type of a volume backup.
|
BootVolumeReplica.LifecycleState |
The current state of a boot volume replica.
|
ByoipRange.LifecycleDetails |
The
ByoipRange resource’s current status. |
ByoipRange.LifecycleState |
The
ByoipRange resource’s current state. |
CapacityReportShapeAvailability.AvailabilityStatus |
A flag denoting whether capacity is available.
|
CapacitySource.CapacityType |
The capacity type of bare metal hosts.
|
CaptureFilter.FilterType |
Indicates which service will use this capture filter
|
CaptureFilter.LifecycleState |
The capture filter’s current administrative state.
|
ClusterNetwork.LifecycleState |
The current state of the cluster network.
|
ClusterNetworkPlacementConfigurationDetails.PlacementConstraint |
The placement constraint when reserving hosts.
|
ClusterNetworkSummary.LifecycleState |
The current state of the cluster network.
|
ComputeBareMetalHost.LifecycleDetails |
The lifecycle state details of the compute bare metal host.
|
ComputeBareMetalHost.LifecycleState |
The current state of the compute bare metal host.
|
ComputeCapacityReservation.LifecycleState |
The current state of the compute capacity reservation.
|
ComputeCapacityTopology.LifecycleState |
The current state of the compute capacity topology.
|
ComputeCluster.LifecycleState |
The current state of the compute cluster.
|
ComputeHpcIsland.LifecycleState |
The current state of the compute HPC island.
|
ComputeNetworkBlock.LifecycleState |
The current state of the compute network block.
|
ConsoleHistory.LifecycleState |
The current state of the console history.
|
CreateBootVolumeBackupDetails.Type |
The type of backup to create.
|
CreateCaptureFilterDetails.FilterType |
Indicates which service will use this capture filter
|
CreateDhcpDetails.DomainNameType |
The search domain name type of DHCP options
|
CreateDrgRouteDistributionDetails.DistributionType |
Whether this distribution defines how routes get imported into route tables or exported
through DRG attachments.
|
CreateImageDetails.LaunchMode |
Specifies the configuration mode for launching virtual machine (VM) instances.
|
CreateInstanceConfigurationBase.Source |
The source of the instance configuration.
|
CreateIPSecConnectionDetails.CpeLocalIdentifierType |
The type of identifier for your CPE device.
|
CreateIPSecConnectionTunnelDetails.IkeVersion |
Internet Key Exchange protocol version.
|
CreateIPSecConnectionTunnelDetails.NatTranslationEnabled |
By default (the
AUTO setting), IKE sends packets with a source and destination port
set to 500, and when it detects that the port used to forward packets has changed (most
likely because a NAT device is between the CPE device and the Oracle VPN headend) it will try
to negotiate the use of NAT-T. |
CreateIPSecConnectionTunnelDetails.OracleInitiation |
Indicates whether the Oracle end of the IPSec connection is able to initiate starting up the
IPSec tunnel.
|
CreateIPSecConnectionTunnelDetails.Routing |
The type of routing to use for this tunnel (BGP dynamic routing, static routing, or
policy-based routing).
|
CreatePublicIpDetails.Lifetime |
Defines when the public IP is deleted and released back to the Oracle Cloud Infrastructure
public IP pool.
|
CreateVirtualCircuitDetails.BgpAdminState |
Set to
ENABLED (the default) to activate the BGP session of the virtual circuit, set
to DISABLED to deactivate the virtual circuit. |
CreateVirtualCircuitDetails.RoutingPolicy | |
CreateVirtualCircuitDetails.Type |
The type of IP addresses used in this virtual circuit.
|
CreateVolumeBackupDetails.Type |
The type of backup to create.
|
CreateVolumeGroupBackupDetails.Type |
The type of backup to create.
|
CreateVtapDetails.EncapsulationProtocol |
Defines an encapsulation header type for the VTAP’s mirrored traffic.
|
CreateVtapDetails.SourceType |
The source type for the VTAP.
|
CreateVtapDetails.TargetType |
The target type for the VTAP.
|
CreateVtapDetails.TrafficMode |
Used to control the priority of traffic.
|
CrossConnect.LifecycleState |
The cross-connect’s current state.
|
CrossConnectGroup.LifecycleState |
The cross-connect group’s current state.
|
CrossConnectMappingDetails.Ipv4BgpStatus |
The state of the Ipv4 BGP session.
|
CrossConnectMappingDetails.Ipv6BgpStatus |
The state of the Ipv6 BGP session.
|
CrossConnectStatus.EncryptionStatus |
Encryption status of this cross connect.
|
CrossConnectStatus.InterfaceState |
Indicates whether Oracle’s side of the interface is up or down.
|
CrossConnectStatus.LightLevelIndicator |
Status indicator corresponding to the light level.
|
DedicatedVmHost.LifecycleState |
The current state of the dedicated VM host.
|
DedicatedVmHostSummary.LifecycleState |
The current state of the dedicated VM host.
|
DhcpDnsOption.ServerType |
VcnLocal: Reserved for future use.
|
DhcpOptions.DomainNameType |
The search domain name type of DHCP options
|
DhcpOptions.LifecycleState |
The current state of the set of DHCP options.
|
DpdConfig.DpdMode |
This option defines whether DPD can be initiated from the Oracle side of the connection.
|
Drg.LifecycleState |
The DRG’s current state.
|
DrgAttachment.LifecycleState |
The DRG attachment’s current state.
|
DrgAttachmentNetworkCreateDetails.Type | |
DrgAttachmentNetworkDetails.Type | |
DrgAttachmentNetworkUpdateDetails.Type | |
DrgAttachmentTypeDrgRouteDistributionMatchCriteria.AttachmentType |
The type of the network resource to be included in this match.
|
DrgRedundancyStatus.Status |
The redundancy status of the DRG.
|
DrgRouteDistribution.DistributionType |
Whether this distribution defines how routes get imported into route tables or exported
through DRG attachments.
|
DrgRouteDistribution.LifecycleState |
The route distribution’s current state.
|
DrgRouteDistributionMatchCriteria.MatchType |
The type of the match criteria for a route distribution statement.
|
DrgRouteDistributionStatement.Action |
ACCEPT indicates the route should be imported or exported as-is. |
DrgRouteRule.DestinationType |
The type of destination for the rule.
|
DrgRouteRule.RouteProvenance |
The earliest origin of a route.
|
DrgRouteRule.RouteType |
You can specify static routes for the DRG route table using the API.
|
DrgRouteTable.LifecycleState |
The DRG route table’s current state.
|
EgressSecurityRule.DestinationType |
Type of destination for the rule.
|
EncryptionInTransitType |
The attachment type of a BM volume.
|
ExportImageDetails.ExportFormat |
The format to export the image to.
|
FastConnectProviderService.BandwithShapeManagement |
Who is responsible for managing the virtual circuit bandwidth.
|
FastConnectProviderService.CustomerAsnManagement |
Who is responsible for managing the ASN information for the network at the other end of the
connection from Oracle.
|
FastConnectProviderService.PrivatePeeringBgpManagement |
Who is responsible for managing the private peering BGP information.
|
FastConnectProviderService.ProviderServiceKeyManagement |
Who is responsible for managing the provider service key.
|
FastConnectProviderService.PublicPeeringBgpManagement |
Who is responsible for managing the public peering BGP information.
|
FastConnectProviderService.SupportedVirtualCircuitTypes | |
FastConnectProviderService.Type |
Provider service type.
|
FlowLogCaptureFilterRuleDetails.FlowLogType |
Type or types of VCN flow logs to store.
|
FlowLogCaptureFilterRuleDetails.RuleAction |
Include or exclude a
ruleAction object. |
GenericBmLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
GenericBmPlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
Image.LaunchMode |
Specifies the configuration mode for launching virtual machine (VM) instances.
|
Image.LifecycleState | |
Image.ListingType |
The listing type of the image.
|
ImageCapabilitySchemaDescriptor.Source | |
ImageSourceDetails.SourceImageType |
The format of the image to be imported.
|
IngressSecurityRule.SourceType |
Type of source for the rule.
|
Instance.LaunchMode |
Specifies the configuration mode for launching virtual machine (VM) instances.
|
Instance.LifecycleState |
The current state of the instance.
|
Instance.SecurityAttributesState |
The lifecycle state of the
securityAttributes |
InstanceAgentPluginConfigDetails.DesiredState |
Whether the plugin should be enabled or disabled.
|
InstanceAvailabilityConfig.RecoveryAction |
The lifecycle state for an instance when it is recovered after infrastructure maintenance.
|
InstanceConfigurationAmdMilanBmGpuLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
InstanceConfigurationAmdMilanBmLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
InstanceConfigurationAmdRomeBmGpuLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
InstanceConfigurationAmdRomeBmLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
InstanceConfigurationAutotunePolicy.AutotuneType |
This specifies the type of autotunes supported by OCI.
|
InstanceConfigurationAvailabilityConfig.RecoveryAction |
The lifecycle state for an instance when it is recovered after infrastructure maintenance.
|
InstanceConfigurationGenericBmLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
InstanceConfigurationIntelIcelakeBmLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
InstanceConfigurationIntelSkylakeBmLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
InstanceConfigurationLaunchInstanceDetails.LaunchMode |
Specifies the configuration mode for launching virtual machine (VM) instances.
|
InstanceConfigurationLaunchInstanceDetails.PreferredMaintenanceAction |
The preferred maintenance action for an instance.
|
InstanceConfigurationLaunchInstancePlatformConfig.Type |
The type of platform being configured.
|
InstanceConfigurationLaunchInstanceShapeConfigDetails.BaselineOcpuUtilization |
The baseline OCPU utilization for a subcore burstable VM instance.
|
InstanceConfigurationLaunchOptions.BootVolumeType |
Emulation type for the boot volume.
|
InstanceConfigurationLaunchOptions.Firmware |
Firmware used to boot VM.
|
InstanceConfigurationLaunchOptions.NetworkType |
Emulation type for the physical network interface card (NIC).
|
InstanceConfigurationLaunchOptions.RemoteDataVolumeType |
Emulation type for volume.
|
InstanceConsoleConnection.LifecycleState |
The current state of the console connection.
|
InstanceMaintenanceAlternativeResolutionActions |
These are alternative actions to the requested instanceAction that can be taken to resolve the
Maintenance.
|
InstanceMaintenanceEvent.CreatedBy |
The creator of the maintenance event.
|
InstanceMaintenanceEvent.InstanceAction |
This is the action that will be performed on the Instance by OCI when the Maintenance begins.
|
InstanceMaintenanceEvent.LifecycleState |
The current state of the maintenance event.
|
InstanceMaintenanceEvent.MaintenanceCategory |
This indicates the priority and allowed actions for this Maintenance.
|
InstanceMaintenanceEvent.MaintenanceReason |
This is the reason that Maintenance is being performed.
|
InstancePool.LifecycleState |
The current state of the instance pool.
|
InstancePoolInstance.LifecycleState |
The attachment state of the instance in relation to the instance pool.
|
InstancePoolInstanceLoadBalancerBackend.BackendHealthStatus |
The health of the backend as observed by the load balancer.
|
InstancePoolLoadBalancerAttachment.LifecycleState |
The status of the interaction between the instance pool and the load balancer.
|
InstancePoolSummary.LifecycleState |
The current state of the instance pool.
|
InstanceShapeConfig.BaselineOcpuUtilization |
The baseline OCPU utilization for a subcore burstable VM instance.
|
IntelIcelakeBmLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
IntelIcelakeBmPlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
IntelSkylakeBmLaunchInstancePlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
IntelSkylakeBmPlatformConfig.NumaNodesPerSocket |
The number of NUMA nodes per socket (NPS).
|
InternetGateway.LifecycleState |
The internet gateway’s current state.
|
InventoryResourceSummary.ResourceType |
Resource types of the resource.
|
InventorySubnetSummary.ResourceType |
Resource types of the subnet.
|
InventoryVcnSummary.ResourceType |
Resource types of the VCN.
|
IpInventorySubnetResourceSummary.AssignedResourceType |
Type of the resource.
|
IpInventorySubnetResourceSummary.AssociatedPublicIpPool |
Public IP address Pool the IP address is allocated from.
|
IpInventorySubnetResourceSummary.IpAddressLifetime |
Lifetime of the allocated private IP address.
|
IpInventorySubnetResourceSummary.PublicIpLifetime |
Lifetime of the assigned public IP address.
|
IPSecConnection.CpeLocalIdentifierType |
The type of identifier for your CPE device.
|
IPSecConnection.LifecycleState |
The IPSec connection’s current state.
|
IPSecConnection.TransportType |
The transport type used for the IPSec connection.
|
IPSecConnectionTunnel.DpdMode |
Dead peer detection (DPD) mode set on the Oracle side of the connection.
|
IPSecConnectionTunnel.IkeVersion |
Internet Key Exchange protocol version.
|
IPSecConnectionTunnel.LifecycleState |
The tunnel’s lifecycle state.
|
IPSecConnectionTunnel.NatTranslationEnabled |
By default (the
AUTO setting), IKE sends packets with a source and destination port
set to 500, and when it detects that the port used to forward packets has changed (most
likely because a NAT device is between the CPE device and the Oracle VPN headend) it will try
to negotiate the use of NAT-T. |
IPSecConnectionTunnel.OracleCanInitiate |
Indicates whether Oracle can only respond to a request to start an IPSec tunnel from the CPE
device, or both respond to and initiate requests.
|
IPSecConnectionTunnel.Routing |
The type of routing used for this tunnel (BGP dynamic routing, static routing, or
policy-based routing).
|
IPSecConnectionTunnel.Status |
The status of the tunnel based on IPSec protocol characteristics.
|
Ipv6.LifecycleState |
The IPv6’s current state.
|
LaunchCreateVolumeDetails.VolumeCreationType |
Specifies the method for volume creation.
|
LaunchInstanceAvailabilityConfigDetails.RecoveryAction |
The lifecycle state for an instance when it is recovered after infrastructure maintenance.
|
LaunchInstancePlatformConfig.Type |
The type of platform being configured.
|
LaunchInstanceShapeConfigDetails.BaselineOcpuUtilization |
The baseline OCPU utilization for a subcore burstable VM instance.
|
LaunchOptions.BootVolumeType |
Emulation type for the boot volume.
|
LaunchOptions.Firmware |
Firmware used to boot VM.
|
LaunchOptions.NetworkType |
Emulation type for the physical network interface card (NIC).
|
LaunchOptions.RemoteDataVolumeType |
Emulation type for volume.
|
LetterOfAuthority.CircuitType |
The type of cross-connect fiber, termination, and optical specification.
|
ListIpInventoryDetails.ResourceTypeList | |
ListIpInventoryDetails.SortBy |
Provide the sort order (
sortOrder ) to sort the fields such as TIMECREATED in
descending or descending order, and DISPLAYNAME in case sensitive. |
ListIpInventoryDetails.SortOrder |
Specifies the sort order to use.
|
LocalPeeringGateway.LifecycleState |
The LPG’s current lifecycle state.
|
LocalPeeringGateway.PeeringStatus |
Whether the LPG is peered with another LPG.
|
MacsecEncryptionCipher |
Type of encryption cipher suite to use for the MACsec connection.
|
MacsecState |
Indicates whether or not MACsec is enabled.
|
MemberReplica.MembershipState |
Membership state of the volume replica in relation to the volume group replica.
|
NatGateway.LifecycleState |
The NAT gateway’s current state.
|
NetworkSecurityGroup.LifecycleState |
The network security group’s current state.
|
PhaseOneConfigDetails.AuthenticationAlgorithm |
The custom authentication algorithm proposed during phase one tunnel negotiation.
|
PhaseOneConfigDetails.DiffieHelmanGroup |
The custom Diffie-Hellman group proposed during phase one tunnel negotiation.
|
PhaseOneConfigDetails.EncryptionAlgorithm |
The custom encryption algorithm proposed during phase one tunnel negotiation.
|
PhaseTwoConfigDetails.AuthenticationAlgorithm |
The authentication algorithm proposed during phase two tunnel negotiation.
|
PhaseTwoConfigDetails.EncryptionAlgorithm |
The encryption algorithm proposed during phase two tunnel negotiation.
|
PhaseTwoConfigDetails.PfsDhGroup |
The Diffie-Hellman group used for PFS, if PFS is enabled.
|
PlatformConfig.Type |
The type of platform being configured.
|
PreemptionAction.Type |
The type of action to run when the instance is interrupted for eviction.
|
PublicIp.AssignedEntityType |
The type of entity the public IP is assigned to, or in the process of being assigned to.
|
PublicIp.LifecycleState |
The public IP’s current state.
|
PublicIp.Lifetime |
Defines when the public IP is deleted and released back to Oracle’s public IP pool.
|
PublicIp.Scope |
Whether the public IP is regional or specific to a particular availability domain.
|
PublicIpPool.LifecycleState |
The public IP pool’s current state.
|
RemotePeeringConnection.LifecycleState |
The RPC’s current lifecycle state.
|
RemotePeeringConnection.PeeringStatus |
Whether the RPC is peered with another RPC.
|
RouteRule.DestinationType |
Type of destination for the rule.
|
RouteRule.RouteType |
A route rule can be STATIC if manually added to the route table, LOCAL if added by OCI to the
route table.
|
RouteTable.LifecycleState |
The route table’s current state.
|
SecurityList.LifecycleState |
The security list’s current state.
|
SecurityRule.DestinationType |
Type of destination for the rule.
|
SecurityRule.Direction |
Direction of the security rule.
|
SecurityRule.SourceType |
Type of source for the rule.
|
ServiceGateway.LifecycleState |
The service gateway’s current state.
|
Shape.BaselineOcpuUtilizations | |
Shape.BillingType |
How instances that use this shape are charged.
|
ShapeNumaNodesPerSocketPlatformOptions.AllowedValues | |
ShapePlatformConfigOptions.Type |
The type of platform being configured.
|
Subnet.LifecycleState |
The subnet’s current state.
|
Topology.Type |
Type of the topology object.
|
TopologyEntityRelationship.Type |
The type of relationship between the entities.
|
TopologyRoutesToRelationshipDetails.RouteType |
A route rule can be
STATIC if manually added to the route table or DYNAMIC if
imported from another route table. |
TunnelRouteSummary.Advertiser |
The source of the route advertisement.
|
TunnelSecurityAssociationSummary.TunnelSaStatus |
The IPSec tunnel’s phase one status.
|
TunnelStatus.LifecycleState |
The tunnel’s current state.
|
UpdateDhcpDetails.DomainNameType |
The search domain name type of DHCP options
|
UpdateDrgRouteRuleDetails.DestinationType |
Type of destination for the rule.
|
UpdateInstanceAvailabilityConfigDetails.RecoveryAction |
The lifecycle state for an instance when it is recovered after infrastructure maintenance.
|
UpdateInstanceDetails.UpdateOperationConstraint |
The parameter acts as a fail-safe to prevent unwanted downtime when updating a running
instance.
|
UpdateInstancePlatformConfig.Type |
The type of platform being configured.
|
UpdateInstanceShapeConfigDetails.BaselineOcpuUtilization |
The baseline OCPU utilization for a subcore burstable VM instance.
|
UpdateIPSecConnectionDetails.CpeLocalIdentifierType |
The type of identifier for your CPE device.
|
UpdateIPSecConnectionTunnelDetails.IkeVersion |
Internet Key Exchange protocol version.
|
UpdateIPSecConnectionTunnelDetails.NatTranslationEnabled |
By default (the
AUTO setting), IKE sends packets with a source and destination port
set to 500, and when it detects that the port used to forward packets has changed (most
likely because a NAT device is between the CPE device and the Oracle VPN headend) it will try
to negotiate the use of NAT-T. |
UpdateIPSecConnectionTunnelDetails.OracleInitiation |
Indicates whether the Oracle end of the IPSec connection is able to initiate starting up the
IPSec tunnel.
|
UpdateIPSecConnectionTunnelDetails.Routing |
The type of routing to use for this tunnel (BGP dynamic routing, static routing, or
policy-based routing).
|
UpdateLaunchOptions.BootVolumeType |
Emulation type for the boot volume.
|
UpdateLaunchOptions.NetworkType |
Emulation type for the physical network interface card (NIC).
|
UpdateSecurityRuleDetails.DestinationType |
Type of destination for the rule.
|
UpdateSecurityRuleDetails.Direction |
Direction of the security rule.
|
UpdateSecurityRuleDetails.SourceType |
Type of source for the rule.
|
UpdateVirtualCircuitDetails.BgpAdminState |
Set to
ENABLED (the default) to activate the BGP session of the virtual circuit, set
to DISABLED to deactivate the virtual circuit. |
UpdateVirtualCircuitDetails.ProviderState |
The provider’s state in relation to this virtual circuit.
|
UpdateVirtualCircuitDetails.RoutingPolicy | |
UpdateVolumeAttachmentDetails.IscsiLoginState |
The iscsi login state of the volume attachment.
|
UpdateVtapDetails.EncapsulationProtocol |
Defines an encapsulation header type for the VTAP’s mirrored traffic.
|
UpdateVtapDetails.SourceType |
The source type for the VTAP.
|
UpdateVtapDetails.TargetType |
The target type for the VTAP.
|
UpdateVtapDetails.TrafficMode |
Used to control the priority of traffic.
|
UpgradeStatus.Status |
The current upgrade status of the DRG attachment.
|
Vcn.LifecycleState |
The VCN’s current state.
|
VcnDnsResolverAssociation.LifecycleState |
The current state of the association.
|
VcnDrgAttachmentNetworkDetails.VcnRouteType |
Indicates whether the VCN CIDRs or the individual subnet CIDRs are imported from the
attachment.
|
VirtualCircuit.BgpAdminState |
Set to
ENABLED (the default) to activate the BGP session of the virtual circuit, set
to DISABLED to deactivate the virtual circuit. |
VirtualCircuit.BgpIpv6SessionState |
The state of the Ipv6 BGP session associated with the virtual circuit.
|
VirtualCircuit.BgpManagement |
Deprecated.
|
VirtualCircuit.BgpSessionState |
The state of the Ipv4 BGP session associated with the virtual circuit.
|
VirtualCircuit.LifecycleState |
The virtual circuit’s current state.
|
VirtualCircuit.ProviderState |
The provider’s state in relation to this virtual circuit (if the customer is connecting via a
provider).
|
VirtualCircuit.RoutingPolicy | |
VirtualCircuit.ServiceType |
Provider service type.
|
VirtualCircuit.Type |
Whether the virtual circuit supports private or public peering.
|
VirtualCircuitAssociatedTunnelDetails.TunnelType |
The type of the tunnel associated with the virtual circuit.
|
VirtualCircuitIpMtu |
The layer 3 IP MTU to use with this virtual circuit.
|
VirtualCircuitPublicPrefix.VerificationState |
Oracle must verify that the customer owns the public IP prefix before traffic for that prefix
can flow across the virtual circuit.
|
VirtualCircuitRedundancyMetadata.ConfiguredRedundancyLevel |
The configured redundancy level of the virtual circuit
|
VirtualCircuitRedundancyMetadata.Ipv4bgpSessionRedundancyStatus |
IPV4 BGP redundancy status indicates if the configured redundancy level is met
|
VirtualCircuitRedundancyMetadata.Ipv6bgpSessionRedundancyStatus |
IPV6 BGP redundancy status indicates if the configured redundancy level is met
|
Vlan.LifecycleState |
The VLAN’s current state.
|
Vnic.LifecycleState |
The current state of the VNIC.
|
VnicAttachment.LifecycleState |
The current state of the VNIC attachment.
|
Volume.LifecycleState |
The current state of a volume.
|
VolumeAttachment.IscsiLoginState |
The iscsi login state of the volume attachment.
|
VolumeAttachment.LifecycleState |
The current state of the volume attachment.
|
VolumeBackup.LifecycleState |
The current state of a volume backup.
|
VolumeBackup.SourceType |
Specifies whether the backup was created manually, or via scheduled backup policy.
|
VolumeBackup.Type |
The type of a volume backup.
|
VolumeBackupSchedule.BackupType |
The type of volume backup to create.
|
VolumeBackupSchedule.DayOfWeek |
The day of the week to schedule the volume backup.
|
VolumeBackupSchedule.Month |
The month of the year to schedule the volume backup.
|
VolumeBackupSchedule.OffsetType |
Indicates how the offset is defined.
|
VolumeBackupSchedule.Period |
The volume backup frequency.
|
VolumeBackupSchedule.TimeZone |
Specifies what time zone is the schedule in
|
VolumeGroup.LifecycleState |
The current state of a volume group.
|
VolumeGroupBackup.LifecycleState |
The current state of a volume group backup.
|
VolumeGroupBackup.SourceType |
Specifies whether the volume group backup was created manually, or via scheduled backup
policy.
|
VolumeGroupBackup.Type |
The type of backup.
|
VolumeGroupReplica.LifecycleState |
The current state of a volume group.
|
Vtap.EncapsulationProtocol |
Defines an encapsulation header type for the VTAP’s mirrored traffic.
|
Vtap.LifecycleState |
The VTAP’s administrative lifecycle state.
|
Vtap.LifecycleStateDetails |
The VTAP’s current running state.
|
Vtap.SourceType |
The source type for the VTAP.
|
Vtap.TargetType |
The target type for the VTAP.
|
Vtap.TrafficMode |
Used to control the priority of traffic.
|
VtapCaptureFilterRuleDetails.RuleAction |
Include or exclude packets meeting this definition from mirrored traffic.
|
VtapCaptureFilterRuleDetails.TrafficDirection |
The traffic direction the VTAP is configured to mirror.
|
Copyright © 2016–2024. All rights reserved.