``create-cursor`` ================= .. contents:: :local: :depth: 1 Description ------------ Creates a cursor. Cursors are used to consume a stream, starting from a specific point in the partition and going forward from there. You can create a cursor based on an offset, a time, the trim horizon, or the most recent message in the stream. As the oldest message inside the retention period boundary, using the trim horizon effectively lets you consume all messages in the stream. A cursor based on the most recent message allows consumption of only messages that are added to the stream after you create the cursor. Cursors expire five minutes after you receive them from the service. The top level --endpoint parameter must be supplied for this operation. Usage ----- .. code-block:: none oci streaming stream cursor create-cursor [OPTIONS] Required Parameters -------------------- .. option:: --partition [text] The partition to get messages from. .. option:: --stream-id [text] The OCID of the stream. .. option:: --type [text] The type of cursor, which determines the starting point from which the stream will be consumed: - `AFTER_OFFSET:` The partition position immediately following the offset you specify. (Offsets are assigned when you successfully append a message to a partition in a stream.) - `AT_OFFSET:` The exact partition position indicated by the offset you specify. - `AT_TIME:` A specific point in time. - `LATEST:` The most recent message in the partition that was added after the cursor was created. - `TRIM_HORIZON:` The oldest message in the partition that is within the retention period window. Accepted values are: .. code-block:: py AFTER_OFFSET, AT_OFFSET, AT_TIME, LATEST, TRIM_HORIZON Optional Parameters -------------------- .. option:: --from-json [text] Provide input to this command as a JSON document from a file using the file://path-to/file syntax. The :option:`--generate-full-command-json-input` option can be used to generate a sample json file to be used with this command option. The key names are pre-populated and match the command option names (converted to camelCase format, e.g. compartment-id --> compartmentId), while the values of the keys need to be populated by the user before using the sample file as an input to this command. For any command option that accepts multiple values, the value of the key can be a JSON array. Options can still be provided on the command line. If an option exists in both the JSON document and the command line then the command line specified value will be used. For examples on usage of this option, please see our "using CLI with advanced JSON options" link: https://docs.cloud.oracle.com/iaas/Content/API/SDKDocs/cliusing.htm#AdvancedJSONOptions .. option:: --offset [integer] The offset to consume from if the cursor type is `AT_OFFSET` or `AFTER_OFFSET`. .. option:: --time [datetime] The time to consume from if the cursor type is `AT_TIME`, expressed in `RFC 3339 `__ timestamp format. The following datetime formats are supported: UTC with microseconds *********************** .. code:: Format: YYYY-MM-DDTHH:mm:ss.ssssssTZD Example: 2017-09-15T20:30:00.123456Z UTC with milliseconds *********************** .. code:: Format: YYYY-MM-DDTHH:mm:ss.sssTZD Example: 2017-09-15T20:30:00.123Z UTC without milliseconds ************************** .. code:: Format: YYYY-MM-DDTHH:mm:ssTZD Example: 2017-09-15T20:30:00Z UTC with minute precision ************************** .. code:: Format: YYYY-MM-DDTHH:mmTZD Example: 2017-09-15T20:30Z Timezone with microseconds *************************** .. code:: Format: YYYY-MM-DDTHH:mm:ssTZD Example: 2017-09-15T12:30:00.456789-08:00, 2017-09-15T12:30:00.456789-0800 Timezone with milliseconds *************************** .. code:: Format: YYYY-MM-DDTHH:mm:ssTZD Example: 2017-09-15T12:30:00.456-08:00, 2017-09-15T12:30:00.456-0800 Timezone without milliseconds ******************************* .. code:: Format: YYYY-MM-DDTHH:mm:ssTZD Example: 2017-09-15T12:30:00-08:00, 2017-09-15T12:30:00-0800 Timezone with minute precision ******************************* .. code:: Format: YYYY-MM-DDTHH:mmTZD Example: 2017-09-15T12:30-08:00, 2017-09-15T12:30-0800 Short date and time ******************** The timezone for this date and time will be taken as UTC (Needs to be surrounded by single or double quotes) .. code:: Format: 'YYYY-MM-DD HH:mm' or "YYYY-MM-DD HH:mm" Example: '2017-09-15 17:25' Date Only ********** This date will be taken as midnight UTC of that day .. code:: Format: YYYY-MM-DD Example: 2017-09-15 Epoch seconds ************** .. code:: Example: 1412195400 Global Parameters ------------------ Use ``oci --help`` for help on global parameters. :option:`--auth-purpose`, :option:`--auth`, :option:`--cert-bundle`, :option:`--cli-auto-prompt`, :option:`--cli-rc-file`, :option:`--config-file`, :option:`--connection-timeout`, :option:`--debug`, :option:`--defaults-file`, :option:`--endpoint`, :option:`--generate-full-command-json-input`, :option:`--generate-param-json-input`, :option:`--help`, :option:`--latest-version`, :option:`--max-retries`, :option:`--no-retry`, :option:`--opc-client-request-id`, :option:`--opc-request-id`, :option:`--output`, :option:`--profile`, :option:`--proxy`, :option:`--query`, :option:`--raw-output`, :option:`--read-timeout`, :option:`--realm-specific-endpoint`, :option:`--region`, :option:`--release-info`, :option:`--request-id`, :option:`--version`, :option:`-?`, :option:`-d`, :option:`-h`, :option:`-i`, :option:`-v` Example using required parameter ------------------ Copy the following CLI commands into a file named example.sh. Run the command by typing "bash example.sh" and replacing the example parameters with your own. Please note this sample will only work in the POSIX-compliant bash-like shell. You need to set up `the OCI configuration `__ and `appropriate security policies `__ before trying the examples. .. code-block:: none :class: copy-code-block export name= # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/streaming/admin/stream/create.html#cmdoption-name export partitions= # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/streaming/admin/stream/create.html#cmdoption-partitions export type= # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/streaming/stream/cursor/create-cursor.html#cmdoption-type stream_id=$(oci streaming admin stream create --name $name --partitions $partitions --query data.id --raw-output) oci streaming stream cursor create-cursor --partition $partition --stream-id $stream_id --type $type