schedule-deletion

Description

Schedules the deletion of the specified vault. This sets the lifecycle state of the vault and all keys in it that are not already scheduled for deletion to PENDING_DELETION and then deletes them after the retention period ends. The lifecycle state and time of deletion for keys already scheduled for deletion won’t change. If any keys in the vault are scheduled to be deleted after the specified time of deletion for the vault, the call is rejected with the error code 409.

As a provisioning operation, this call is subject to a Key Management limit that applies to the total number of requests across all provisioning write operations. Key Management might throttle this call to reject an otherwise valid request when the total rate of provisioning write operations exceeds 10 requests per second for a given tenancy.

Usage

oci kms management vault schedule-deletion [OPTIONS]

Required Parameters

--vault-id [text]

The OCID of the vault.

Optional Parameters

--from-json [text]

Provide input to this command as a JSON document from a file using the file://path-to/file syntax.

The --generate-full-command-json-input option can be used to generate a sample json file to be used with this command option. The key names are pre-populated and match the command option names (converted to camelCase format, e.g. compartment-id –> compartmentId), while the values of the keys need to be populated by the user before using the sample file as an input to this command. For any command option that accepts multiple values, the value of the key can be a JSON array.

Options can still be provided on the command line. If an option exists in both the JSON document and the command line then the command line specified value will be used.

For examples on usage of this option, please see our “using CLI with advanced JSON options” link: https://docs.cloud.oracle.com/iaas/Content/API/SDKDocs/cliusing.htm#AdvancedJSONOptions

--if-match [text]

For optimistic concurrency control. In the PUT or DELETE call for a resource, set the if-match parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource’s current etag value.

--max-wait-seconds [integer]

The maximum time to wait for the resource to reach the lifecycle state defined by --wait-for-state. Defaults to 1200 seconds.

--time-of-deletion [datetime]

An optional property indicating when to delete the vault, expressed in RFC 3339 timestamp format. The specified time must be between 7 and 30 days from the time when the request is received. If this property is missing, it will be set to 30 days from the time of the request by default.

The following datetime formats are supported:

UTC with microseconds

Format: YYYY-MM-DDTHH:mm:ss.ssssssTZD
Example: 2017-09-15T20:30:00.123456Z

UTC with milliseconds
***********************
.. code::

    Format: YYYY-MM-DDTHH:mm:ss.sssTZD
    Example: 2017-09-15T20:30:00.123Z

UTC without milliseconds
**************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T20:30:00Z

UTC with minute precision
**************************
.. code::

    Format: YYYY-MM-DDTHH:mmTZD
    Example: 2017-09-15T20:30Z

Timezone with microseconds

Format: YYYY-MM-DDTHH:mm:ssTZD
Example: 2017-09-15T12:30:00.456789-08:00, 2017-09-15T12:30:00.456789-0800

Timezone with milliseconds
***************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T12:30:00.456-08:00, 2017-09-15T12:30:00.456-0800

Timezone without milliseconds
*******************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T12:30:00-08:00, 2017-09-15T12:30:00-0800

Timezone with minute precision
*******************************
.. code::

    Format: YYYY-MM-DDTHH:mmTZD
    Example: 2017-09-15T12:30-08:00, 2017-09-15T12:30-0800

Short date and time
********************
The timezone for this date and time will be taken as UTC (Needs to be surrounded by single or double quotes)

.. code::

    Format: 'YYYY-MM-DD HH:mm' or "YYYY-MM-DD HH:mm"
    Example: '2017-09-15 17:25'

Date Only
**********
This date will be taken as midnight UTC of that day

.. code::

    Format: YYYY-MM-DD
    Example: 2017-09-15

Epoch seconds
**************
.. code::

    Example: 1412195400
--wait-for-state [text]

This operation creates, modifies or deletes a resource that has a defined lifecycle state. Specify this option to perform the action and then wait until the resource reaches a given lifecycle state. Multiple states can be specified, returning on the first state. For example, --wait-for-state SUCCEEDED --wait-for-state FAILED would return on whichever lifecycle state is reached first. If timeout is reached, a return code of 2 is returned. For any other error, a return code of 1 is returned.

Accepted values are:

ACTIVE, BACKUP_IN_PROGRESS, CANCELLING_DELETION, CREATING, DELETED, DELETING, PENDING_DELETION, RESTORING, SCHEDULING_DELETION, UPDATING
--wait-interval-seconds [integer]

Check every --wait-interval-seconds to see whether the resource has reached the lifecycle state defined by --wait-for-state. Defaults to 30 seconds.

Example using required parameter

Copy the following CLI commands into a file named example.sh. Run the command by typing “bash example.sh” and replacing the example parameters with your own.

Please note this sample will only work in the POSIX-compliant bash-like shell. You need to set up the OCI configuration and appropriate security policies before trying the examples.

    export compartment_id=<substitute-value-of-compartment_id> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/kms/management/vault/create.html#cmdoption-compartment-id
    export display_name=<substitute-value-of-display_name> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/kms/management/vault/create.html#cmdoption-display-name
    export vault_type=<substitute-value-of-vault_type> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/kms/management/vault/create.html#cmdoption-vault-type

    vault_id=$(oci kms management vault create --compartment-id $compartment_id --display-name $display_name --vault-type $vault_type --query data.id --raw-output)

    oci kms management vault schedule-deletion --vault-id $vault_id