list

Description

Returns a list of all Problems identified by the Cloud Guard

The ListProblems operation returns only the problems in compartmentId passed. The list does not include any subcompartments of the compartmentId passed.

The parameter accessLevel specifies whether to return only those compartments for which the requestor has INSPECT permissions on at least one resource directly or indirectly (ACCESSIBLE) (the resource can be in a subcompartment) or to return Not Authorized if Principal doesn’t have access to even one of the child compartments. This is valid only when compartmentIdInSubtree is set to true.

The parameter compartmentIdInSubtree applies when you perform ListProblems on the compartmentId passed and when it is set to true, the entire hierarchy of compartments can be returned. To get a full list of all compartments and subcompartments in the tenancy (root compartment), set the parameter compartmentIdInSubtree to true and accessLevel to ACCESSIBLE.

Usage

oci cloud-guard problem list [OPTIONS]

Required Parameters

--compartment-id, -c [text]

The ID of the compartment in which to list resources.

Optional Parameters

--access-level [text]

Valid values are RESTRICTED and ACCESSIBLE. Default is RESTRICTED. Setting this to ACCESSIBLE returns only those compartments for which the user has INSPECT permissions directly or indirectly (permissions can be on a resource in a subcompartment). When set to RESTRICTED permissions are checked and no partial results are displayed.

Accepted values are:

ACCESSIBLE, RESTRICTED
--all

Fetches all pages of results. If you provide this option, then you cannot provide the --limit option.

--city [text]

City of the problem.

--compartment-id-in-subtree [boolean]

Default is false. When set to true, the hierarchy of compartments is traversed and all compartments and subcompartments in the tenancy are returned depending on the the setting of accessLevel.

--country [text]

Country of the problem.

--detector-rule-id-list [text]

Comma seperated list of detector rule ids to be passed in to match against Problems.

--detector-type [text]

The field to list the Problems by Detector Type. Valid values are IAAS_ACTIVITY_DETECTOR and IAAS_CONFIGURATION_DETECTOR

Accepted values are:

IAAS_ACTIVITY_DETECTOR, IAAS_CONFIGURATION_DETECTOR
--from-json [text]

Provide input to this command as a JSON document from a file using the file://path-to/file syntax.

The --generate-full-command-json-input option can be used to generate a sample json file to be used with this command option. The key names are pre-populated and match the command option names (converted to camelCase format, e.g. compartment-id –> compartmentId), while the values of the keys need to be populated by the user before using the sample file as an input to this command. For any command option that accepts multiple values, the value of the key can be a JSON array.

Options can still be provided on the command line. If an option exists in both the JSON document and the command line then the command line specified value will be used.

For examples on usage of this option, please see our “using CLI with advanced JSON options” link: https://docs.cloud.oracle.com/iaas/Content/API/SDKDocs/cliusing.htm#AdvancedJSONOptions

--label [text]

Label associated with the Problem.

--lifecycle-detail [text]

The field life cycle state. Only one state can be provided. Default value for state is active. If no value is specified state is active.

Accepted values are:

DISMISSED, OPEN, RESOLVED
--lifecycle-state [text]

The field life cycle state. Only one state can be provided. Default value for state is active. If no value is specified state is active.

Accepted values are:

ACTIVE, INACTIVE
--limit [integer]

The maximum number of items to return.

--page [text]

The page token representing the page at which to start retrieving results. This is usually retrieved from a previous list call.

--page-size [integer]

When fetching results, the number of results to fetch per call. Only valid when used with --all or --limit, and ignored otherwise.

--problem-region [text]

OCI Monitoring region.

--resource-id [text]

The ID of the resource associated with the problem.

--resource-type [text]

Resource Type associated with the resource.

--risk-level [text]

Risk level of the Problem.

--sort-by [text]

The field to sort by. Only one sort order may be provided. Default order for riskLevel, timeLastDetected and resourceName is descending. Default order for riskLevel and resourceName is ascending. If no value is specified timeLastDetected is default.

Accepted values are:

resourceName, riskLevel, timeLastDetected
--sort-order [text]

The sort order to use, either ‘asc’ or ‘desc’.

Accepted values are:

ASC, DESC
--state [text]

State of the problem.

--target-id [text]

The ID of the target in which to list resources.

--time-first-detected-greater-than-or-equal-to [datetime]

Start time for a filter. If start time is not specified, start time will be set to current time - 30 days.

The following datetime formats are supported:

UTC with microseconds

Format: YYYY-MM-DDTHH:mm:ss.ssssssTZD
Example: 2017-09-15T20:30:00.123456Z

UTC with milliseconds
***********************
.. code::

    Format: YYYY-MM-DDTHH:mm:ss.sssTZD
    Example: 2017-09-15T20:30:00.123Z

UTC without milliseconds
**************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T20:30:00Z

UTC with minute precision
**************************
.. code::

    Format: YYYY-MM-DDTHH:mmTZD
    Example: 2017-09-15T20:30Z

Timezone with microseconds

Format: YYYY-MM-DDTHH:mm:ssTZD
Example: 2017-09-15T12:30:00.456789-08:00, 2017-09-15T12:30:00.456789-0800

Timezone with milliseconds
***************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T12:30:00.456-08:00, 2017-09-15T12:30:00.456-0800

Timezone without milliseconds
*******************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T12:30:00-08:00, 2017-09-15T12:30:00-0800

Timezone with minute precision
*******************************
.. code::

    Format: YYYY-MM-DDTHH:mmTZD
    Example: 2017-09-15T12:30-08:00, 2017-09-15T12:30-0800

Short date and time
********************
The timezone for this date and time will be taken as UTC (Needs to be surrounded by single or double quotes)

.. code::

    Format: 'YYYY-MM-DD HH:mm' or "YYYY-MM-DD HH:mm"
    Example: '2017-09-15 17:25'

Date Only
**********
This date will be taken as midnight UTC of that day

.. code::

    Format: YYYY-MM-DD
    Example: 2017-09-15

Epoch seconds
**************
.. code::

    Example: 1412195400
--time-first-detected-less-than-or-equal-to [datetime]

End time for a filter. If end time is not specified, end time will be set to current time.

The following datetime formats are supported:

UTC with microseconds

Format: YYYY-MM-DDTHH:mm:ss.ssssssTZD
Example: 2017-09-15T20:30:00.123456Z

UTC with milliseconds
***********************
.. code::

    Format: YYYY-MM-DDTHH:mm:ss.sssTZD
    Example: 2017-09-15T20:30:00.123Z

UTC without milliseconds
**************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T20:30:00Z

UTC with minute precision
**************************
.. code::

    Format: YYYY-MM-DDTHH:mmTZD
    Example: 2017-09-15T20:30Z

Timezone with microseconds

Format: YYYY-MM-DDTHH:mm:ssTZD
Example: 2017-09-15T12:30:00.456789-08:00, 2017-09-15T12:30:00.456789-0800

Timezone with milliseconds
***************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T12:30:00.456-08:00, 2017-09-15T12:30:00.456-0800

Timezone without milliseconds
*******************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T12:30:00-08:00, 2017-09-15T12:30:00-0800

Timezone with minute precision
*******************************
.. code::

    Format: YYYY-MM-DDTHH:mmTZD
    Example: 2017-09-15T12:30-08:00, 2017-09-15T12:30-0800

Short date and time
********************
The timezone for this date and time will be taken as UTC (Needs to be surrounded by single or double quotes)

.. code::

    Format: 'YYYY-MM-DD HH:mm' or "YYYY-MM-DD HH:mm"
    Example: '2017-09-15 17:25'

Date Only
**********
This date will be taken as midnight UTC of that day

.. code::

    Format: YYYY-MM-DD
    Example: 2017-09-15

Epoch seconds
**************
.. code::

    Example: 1412195400
--time-last-detected-greater-than-or-equal-to [datetime]

Start time for a filter. If start time is not specified, start time will be set to current time - 30 days.

The following datetime formats are supported:

UTC with microseconds

Format: YYYY-MM-DDTHH:mm:ss.ssssssTZD
Example: 2017-09-15T20:30:00.123456Z

UTC with milliseconds
***********************
.. code::

    Format: YYYY-MM-DDTHH:mm:ss.sssTZD
    Example: 2017-09-15T20:30:00.123Z

UTC without milliseconds
**************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T20:30:00Z

UTC with minute precision
**************************
.. code::

    Format: YYYY-MM-DDTHH:mmTZD
    Example: 2017-09-15T20:30Z

Timezone with microseconds

Format: YYYY-MM-DDTHH:mm:ssTZD
Example: 2017-09-15T12:30:00.456789-08:00, 2017-09-15T12:30:00.456789-0800

Timezone with milliseconds
***************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T12:30:00.456-08:00, 2017-09-15T12:30:00.456-0800

Timezone without milliseconds
*******************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T12:30:00-08:00, 2017-09-15T12:30:00-0800

Timezone with minute precision
*******************************
.. code::

    Format: YYYY-MM-DDTHH:mmTZD
    Example: 2017-09-15T12:30-08:00, 2017-09-15T12:30-0800

Short date and time
********************
The timezone for this date and time will be taken as UTC (Needs to be surrounded by single or double quotes)

.. code::

    Format: 'YYYY-MM-DD HH:mm' or "YYYY-MM-DD HH:mm"
    Example: '2017-09-15 17:25'

Date Only
**********
This date will be taken as midnight UTC of that day

.. code::

    Format: YYYY-MM-DD
    Example: 2017-09-15

Epoch seconds
**************
.. code::

    Example: 1412195400
--time-last-detected-less-than-or-equal-to [datetime]

End time for a filter. If end time is not specified, end time will be set to current time.

The following datetime formats are supported:

UTC with microseconds

Format: YYYY-MM-DDTHH:mm:ss.ssssssTZD
Example: 2017-09-15T20:30:00.123456Z

UTC with milliseconds
***********************
.. code::

    Format: YYYY-MM-DDTHH:mm:ss.sssTZD
    Example: 2017-09-15T20:30:00.123Z

UTC without milliseconds
**************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T20:30:00Z

UTC with minute precision
**************************
.. code::

    Format: YYYY-MM-DDTHH:mmTZD
    Example: 2017-09-15T20:30Z

Timezone with microseconds

Format: YYYY-MM-DDTHH:mm:ssTZD
Example: 2017-09-15T12:30:00.456789-08:00, 2017-09-15T12:30:00.456789-0800

Timezone with milliseconds
***************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T12:30:00.456-08:00, 2017-09-15T12:30:00.456-0800

Timezone without milliseconds
*******************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T12:30:00-08:00, 2017-09-15T12:30:00-0800

Timezone with minute precision
*******************************
.. code::

    Format: YYYY-MM-DDTHH:mmTZD
    Example: 2017-09-15T12:30-08:00, 2017-09-15T12:30-0800

Short date and time
********************
The timezone for this date and time will be taken as UTC (Needs to be surrounded by single or double quotes)

.. code::

    Format: 'YYYY-MM-DD HH:mm' or "YYYY-MM-DD HH:mm"
    Example: '2017-09-15 17:25'

Date Only
**********
This date will be taken as midnight UTC of that day

.. code::

    Format: YYYY-MM-DD
    Example: 2017-09-15

Epoch seconds
**************
.. code::

    Example: 1412195400

Examples

Copy the following CLI commands into a file named example.sh. Run the command by typing “bash example.sh” and replacing the example parameters with your own.

Please note this sample will only work in the POSIX-compliant bash-like shell. You need to set up the OCI configuration and appropriate security policies before trying the examples.

    export compartment_id=<substitute-value-of-compartment_id> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/cloud-guard/problem/list.html#cmdoption-compartment-id

    oci cloud-guard problem list --compartment-id $compartment_id