Write-OCIObjectstoragePart

SYNOPSIS

Invokes ObjectStorage service - UploadPart operation.

SYNTAX

FromStream

Write-OCIObjectstoragePart -NamespaceName <String> -BucketName <String> -ObjectName <String> -UploadId <String> -UploadPartNum <Int32> [-ContentLength <Int64>] -UploadPartBody <Stream> [-OpcClientRequestId <String>] [-IfMatch <String>] [-IfNoneMatch <String>] [-Expect <String>] [-ContentMD5 <String>] [-OpcChecksumAlgorithm <ChecksumAlgorithm>] [-OpcContentCrc32c <String>] [-OpcContentSha256 <String>] [-OpcContentSha384 <String>] [-OpcSseCustomerAlgorithm <String>] [-OpcSseCustomerKey <String>] [-OpcSseCustomerKeySha256 <String>] [-OpcSseKmsKeyId <String>] [-DisableRealmSpecificEndpoint] [-ConfigFile <String>] [-Endpoint <String>] [-NoRetry] [-Profile <String>] [-Region <String>] [-FullResponse] [-TimeOutInMillis <Int32>] [-AuthType <AuthenticationType>] [<CommonParameters>]

FromFile

Write-OCIObjectstoragePart -NamespaceName <String> -BucketName <String> -ObjectName <String> -UploadId <String> -UploadPartNum <Int32> [-ContentLength <Int64>] -UploadPartBodyFromFile <String> [-OpcClientRequestId <String>] [-IfMatch <String>] [-IfNoneMatch <String>] [-Expect <String>] [-ContentMD5 <String>] [-OpcChecksumAlgorithm <ChecksumAlgorithm>] [-OpcContentCrc32c <String>] [-OpcContentSha256 <String>] [-OpcContentSha384 <String>] [-OpcSseCustomerAlgorithm <String>] [-OpcSseCustomerKey <String>] [-OpcSseCustomerKeySha256 <String>] [-OpcSseKmsKeyId <String>] [-DisableRealmSpecificEndpoint] [-ConfigFile <String>] [-Endpoint <String>] [-NoRetry] [-Profile <String>] [-Region <String>] [-FullResponse] [-TimeOutInMillis <Int32>] [-AuthType <AuthenticationType>] [<CommonParameters>]

DESCRIPTION

Uploads a single part of a multipart upload.

PARAMETERS

-AuthType

Type of authentication to use for making API requests. Default is Key based Authentication.

Type: AuthenticationType
Parameter Sets: (All)
Aliases: None
Accepted values: ApiKey, InstancePrincipal, SessionToken

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-BucketName

The name of the bucket. Avoid entering confidential information. Example: `my-new-bucket1`

Type: String
Parameter Sets: (All)
Aliases: None

Required: True
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-ConfigFile

The path to the config file.

Type: String
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ContentLength

The content length of the body.

Type: Int64
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-ContentMD5

The optional header that defines the base64-encoded MD5 hash of the body. If the optional Content-MD5 header is present, Object Storage performs an integrity check on the body of the HTTP request by computing the MD5 hash for the body and comparing it to the MD5 hash supplied in the header. If the two hashes do not match, the object is rejected and an HTTP-400 Unmatched Content MD5 error is returned with the message:

"The computed MD5 of the request body (ACTUAL_MD5) does not match the Content-MD5 header (HEADER_MD5)"

Type: String
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-DisableRealmSpecificEndpoint

If set, the realm specific endpoint is used. The -Endpoint parameter takes precedence over this option.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-Endpoint

The value to use as the service endpoint, including any required API version path.

Type: String
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-Expect

A value of `100-continue` requests preliminary verification of the request method, path, and headers before the request body is sent. If no error results from such verification, the server will send a 100 (Continue) interim response to indicate readiness for the request body. The only allowed value for this parameter is "100-Continue" (case-insensitive).

Type: String
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-FullResponse

Output the complete response returned by the API Operation. Using this switch will make this Cmdlet output an object containing response headers in-addition to an optional response body.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-IfMatch

The entity tag (ETag) to match with the ETag of an existing resource. If the specified ETag matches the ETag of the existing resource, GET and HEAD requests will return the resource and PUT and POST requests will upload the resource.

Type: String
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-IfNoneMatch

The entity tag (ETag) to avoid matching. The only valid value is '*', which indicates that the request should fail if the resource already exists.

Type: String
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-NamespaceName

The Object Storage namespace used for the request.

Type: String
Parameter Sets: (All)
Aliases: None

Required: True
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-NoRetry

Disable retry logic for calls to services.

Type: SwitchParameter
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-ObjectName

The name of the object. Avoid entering confidential information. Example: `test/object1.log`

Type: String
Parameter Sets: (All)
Aliases: None

Required: True
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-OpcChecksumAlgorithm

The optional checksum algorithm to use to compute and store the checksum of the body of the HTTP request (or the parts in case of multipart uploads), in addition to the default MD5 checksum.

Type: ChecksumAlgorithm
Parameter Sets: (All)
Aliases: None
Accepted values: Crc32C, Sha256, Sha384

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-OpcClientRequestId

The client request ID for tracing.

Type: String
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-OpcContentCrc32c

Applicable only if CRC32C is specified in the opc-checksum-algorithm request header.

The optional header that defines the base64-encoded, 32-bit CRC32C (Castagnoli) checksum of the body. If the optional opc-content-crc32c header is present, Object Storage performs an integrity check on the body of the HTTP request by computing the CRC32C checksum for the body and comparing it to the CRC32C checksum supplied in the header. If the two checksums do not match, the object is rejected and an HTTP-400 Unmatched Content CRC32C error is returned with the message:

"The computed CRC32C of the request body (ACTUAL_CRC32C) does not match the opc-content-crc32c header (HEADER_CRC32C)"

Type: String
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-OpcContentSha256

Applicable only if SHA256 is specified in the opc-checksum-algorithm request header.

The optional header that defines the base64-encoded SHA256 hash of the body. If the optional opc-content-sha256 header is present, Object Storage performs an integrity check on the body of the HTTP request by computing the SHA256 hash for the body and comparing it to the SHA256 hash supplied in the header. If the two hashes do not match, the object is rejected and an HTTP-400 Unmatched Content SHA256 error is returned with the message:

"The computed SHA256 of the request body (ACTUAL_SHA256) does not match the opc-content-sha256 header (HEADER_SHA256)"

Type: String
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-OpcContentSha384

Applicable only if SHA384 is specified in the opc-checksum-algorithm request header.

The optional header that defines the base64-encoded SHA384 hash of the body. If the optional opc-content-sha384 header is present, Object Storage performs an integrity check on the body of the HTTP request by computing the SHA384 hash for the body and comparing it to the SHA384 hash supplied in the header. If the two hashes do not match, the object is rejected and an HTTP-400 Unmatched Content SHA384 error is returned with the message:

"The computed SHA384 of the request body (ACTUAL_SHA384) does not match the opc-content-sha384 header (HEADER_SHA384)"

Type: String
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-OpcSseCustomerAlgorithm

The optional header that specifies "AES256" as the encryption algorithm. For more information, see Using Your Own Keys for Server-Side Encryption.

Type: String
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-OpcSseCustomerKey

The optional header that specifies the base64-encoded 256-bit encryption key to use to encrypt or decrypt the data. For more information, see Using Your Own Keys for Server-Side Encryption.

Type: String
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-OpcSseCustomerKeySha256

The optional header that specifies the base64-encoded SHA256 hash of the encryption key. This value is used to check the integrity of the encryption key. For more information, see Using Your Own Keys for Server-Side Encryption.

Type: String
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-OpcSseKmsKeyId

The OCID of a master encryption key used to call the Key Management service to generate a data encryption key or to encrypt or decrypt a data encryption key.

Type: String
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-Profile

The profile in the config file to load.

Type: String
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-Region

Region-id of the region to make calls against. eg) us-phoenix-1, ap-singapore-1

Type: String
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-TimeOutInMillis

Max wait time in milliseconds for the API request to complete. Default is 100000 millis(100 secs).

Type: Int32
Parameter Sets: (All)
Aliases: None

Required: False
Position: Named
Default value: None
Accept pipeline input: False
Accept wildcard characters: False

-UploadId

The upload ID for a multipart upload.

Type: String
Parameter Sets: (All)
Aliases: None

Required: True
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-UploadPartBody

The part being uploaded to the Object Storage service.

Type: Stream
Parameter Sets: FromStream
Aliases: None

Required: True
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-UploadPartBodyFromFile

Use this parameter to provide the file location from where the input stream to be read. The part being uploaded to the Object Storage service.

Type: String
Parameter Sets: FromFile
Aliases: None

Required: True
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

-UploadPartNum

The part number that identifies the object part currently being uploaded.

Type: Int32
Parameter Sets: (All)
Aliases: None

Required: True
Position: Named
Default value: None
Accept pipeline input: True (ByPropertyName)
Accept wildcard characters: False

CommonParameters

This cmdlet supports the common parameters: -Debug, -ErrorAction, -ErrorVariable, -InformationAction, -InformationVariable, -OutVariable, -OutBuffer, -PipelineVariable, -Verbose, -WarningAction, and -WarningVariable. For more information, see about_CommonParameters.

OUTPUTS

• System.Void
• Oci.ObjectstorageService.Responses.UploadPartResponse

RELATED LINKS

• APIReference
• DotnetSDKAPI
• OCIModulesDocs
• OCIServiceConcepts
• Examples