Class: OCI::Audit::AuditClient

Inherits:
Object
  • Object
show all
Defined in:
lib/oci/audit/audit_client.rb

Overview

API for the Audit Service. Use this API for compliance monitoring in your tenancy. For more information, see Overview of Audit.

Tip: This API is good for queries, but not bulk-export operations.

Instance Attribute Summary collapse

Instance Method Summary collapse

Constructor Details

#initialize(config: nil, region: nil, endpoint: nil, signer: nil, proxy_settings: nil, retry_config: nil) ⇒ AuditClient

Creates a new AuditClient. Notes: If a config is not specified, then the global OCI.config will be used.

This client is not thread-safe

Either a region or an endpoint must be specified. If an endpoint is specified, it will be used instead of the region. A region may be specified in the config or via or the region parameter. If specified in both, then the region parameter will be used.

Parameters:

  • config (Config) (defaults to: nil) —

    A Config object.

  • region (String) (defaults to: nil) —

    A region used to determine the service endpoint. This will usually correspond to a value in Regions::REGION_ENUM, but may be an arbitrary string.

  • endpoint (String) (defaults to: nil) —

    The fully qualified endpoint URL

  • signer (OCI::BaseSigner) (defaults to: nil) —

    A signer implementation which can be used by this client. If this is not provided then a signer will be constructed via the provided config. One use case of this parameter is instance principals authentication, so that the instance principals signer can be provided to the client

  • proxy_settings (OCI::ApiClientProxySettings) (defaults to: nil) —

    If your environment requires you to use a proxy server for outgoing HTTP requests the details for the proxy can be provided in this parameter

  • retry_config (OCI::Retry::RetryConfig) (defaults to: nil) —

    The retry configuration for this service client. This represents the default retry configuration to apply across all operations. This can be overridden on a per-operation basis. The default retry configuration value is nil, which means that an operation will not perform any retries



56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
 
# File 'lib/oci/audit/audit_client.rb', line 56

def initialize(config: nil, region: nil, endpoint: nil, signer: nil, proxy_settings: nil, retry_config: nil)
  # If the signer is an InstancePrincipalsSecurityTokenSigner or SecurityTokenSigner and no config was supplied (they are self-sufficient signers)
  # then create a dummy config to pass to the ApiClient constructor. If customers wish to create a client which uses instance principals
  # and has config (either populated programmatically or loaded from a file), they must construct that config themselves and then
  # pass it to this constructor.
  #
  # If there is no signer (or the signer is not an instance principals signer) and no config was supplied, this is not valid
  # so try and load the config from the default file.
  config = OCI::Config.validate_and_build_config_with_signer(config, signer)

  if signer.nil?
    signer = OCI::Signer.new(
      config.user,
      config.fingerprint,
      config.tenancy,
      config.key_file,
      pass_phrase: config.pass_phrase,
      private_key_content: config.key_content
    )
  end

  @api_client = OCI::ApiClient.new(config, signer, proxy_settings: proxy_settings)
  @retry_config = retry_config

  if endpoint
    @endpoint = endpoint + '/20190901'
  else
    region ||= config.region
    region ||= signer.region if signer.respond_to?(:region)
    self.region = region
  end
  logger.info "AuditClient endpoint set to '#{@endpoint}'." if logger
end

Instance Attribute Details

#api_client ⇒ OCI::ApiClient (readonly)

Client used to make HTTP requests.

Returns:



16
17
18
 
# File 'lib/oci/audit/audit_client.rb', line 16

def api_client
  @api_client
end

#endpoint ⇒ String (readonly)

Fully qualified endpoint URL

Returns:

  • (String) 


20
21
22
 
# File 'lib/oci/audit/audit_client.rb', line 20

def endpoint
  @endpoint
end

#region ⇒ String

The region, which will usually correspond to a value in Regions::REGION_ENUM.

Returns:

  • (String) 


30
31
32
 
# File 'lib/oci/audit/audit_client.rb', line 30

def region
  @region
end

#retry_config ⇒ OCI::Retry::RetryConfig (readonly)

The default retry configuration to apply to all operations in this service client. This can be overridden on a per-operation basis. The default retry configuration value is nil, which means that an operation will not perform any retries

Returns:



26
27
28
 
# File 'lib/oci/audit/audit_client.rb', line 26

def retry_config
  @retry_config
end

Instance Method Details

#get_configuration(compartment_id, opts = {}) ⇒ Response

Get the configuration

Parameters:

  • compartment_id (String) —

    ID of the root compartment (tenancy)

  • opts (Hash) (defaults to: {}) —

    the optional parameters

Options Hash (opts):

  • :retry_config (OCI::Retry::RetryConfig) —

    The retry configuration to apply to this operation. If no key is provided then the service-level retry configuration defined by #retry_config will be used. If an explicit nil value is provided then the operation will not retry

Returns:



120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
 
# File 'lib/oci/audit/audit_client.rb', line 120

def get_configuration(compartment_id, opts = {})
  logger.debug 'Calling operation AuditClient#get_configuration.' if logger

  raise "Missing the required parameter 'compartment_id' when calling get_configuration." if compartment_id.nil?

  path = '/configuration'
  operation_signing_strategy = :standard

  # rubocop:disable Style/NegatedIf
  # Query Params
  query_params = {}
  query_params[:compartmentId] = compartment_id

  # Header Params
  header_params = {}
  header_params[:accept] = 'application/json'
  header_params[:'content-type'] = 'application/json'
  # rubocop:enable Style/NegatedIf

  post_body = nil

  # rubocop:disable Metrics/BlockLength
  OCI::Retry.make_retrying_call(applicable_retry_config(opts), call_name: 'AuditClient#get_configuration') do
    @api_client.call_api(
      :GET,
      path,
      endpoint,
      header_params: header_params,
      query_params: query_params,
      operation_signing_strategy: operation_signing_strategy,
      body: post_body,
      return_type: 'OCI::Audit::Models::Configuration'
    )
  end
  # rubocop:enable Metrics/BlockLength
end

#list_events(compartment_id, start_time, end_time, opts = {}) ⇒ Response

Returns all the audit events processed for the specified compartment within the specified time range.

Parameters:

  • compartment_id (String) —

    The OCID of the compartment.

  • start_time (DateTime) —

    Returns events that were processed at or after this start date and time, expressed in RFC 3339 timestamp format.

    For example, a start value of 2017-01-15T11:30:00Z will retrieve a list of all events processed since 30 minutes after the 11th hour of January 15, 2017, in Coordinated Universal Time (UTC). You can specify a value with granularity to the minute. Seconds (and milliseconds, if included) must be set to 0.

  • end_time (DateTime) —

    Returns events that were processed before this end date and time, expressed in RFC 3339 timestamp format.

    For example, a start value of 2017-01-01T00:00:00Z and an end value of 2017-01-02T00:00:00Z will retrieve a list of all events processed on January 1, 2017. Similarly, a start value of 2017-01-01T00:00:00Z and an end value of 2017-02-01T00:00:00Z will result in a list of all events processed between January 1, 2017 and January 31, 2017. You can specify a value with granularity to the minute. Seconds (and milliseconds, if included) must be set to 0.

  • opts (Hash) (defaults to: {}) —

    the optional parameters

Options Hash (opts):

  • :retry_config (OCI::Retry::RetryConfig) —

    The retry configuration to apply to this operation. If no key is provided then the service-level retry configuration defined by #retry_config will be used. If an explicit nil value is provided then the operation will not retry

  • :page (String) —

    For list pagination. The value of the opc-next-page response header from the previous "List" call. For important details about how pagination works, see List Pagination.

  • :opc_request_id (String) —

    Unique Oracle-assigned identifier for the request. If you need to contact Oracle about a particular request, please provide the request ID.

Returns:



197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
 
# File 'lib/oci/audit/audit_client.rb', line 197

def list_events(compartment_id, start_time, end_time, opts = {})
  logger.debug 'Calling operation AuditClient#list_events.' if logger

  raise "Missing the required parameter 'compartment_id' when calling list_events." if compartment_id.nil?
  raise "Missing the required parameter 'start_time' when calling list_events." if start_time.nil?
  raise "Missing the required parameter 'end_time' when calling list_events." if end_time.nil?

  path = '/auditEvents'
  operation_signing_strategy = :standard

  # rubocop:disable Style/NegatedIf
  # Query Params
  query_params = {}
  query_params[:compartmentId] = compartment_id
  query_params[:startTime] = start_time
  query_params[:endTime] = end_time
  query_params[:page] = opts[:page] if opts[:page]

  # Header Params
  header_params = {}
  header_params[:accept] = 'application/json'
  header_params[:'content-type'] = 'application/json'
  header_params[:'opc-request-id'] = opts[:opc_request_id] if opts[:opc_request_id]
  # rubocop:enable Style/NegatedIf

  post_body = nil

  # rubocop:disable Metrics/BlockLength
  OCI::Retry.make_retrying_call(applicable_retry_config(opts), call_name: 'AuditClient#list_events') do
    @api_client.call_api(
      :GET,
      path,
      endpoint,
      header_params: header_params,
      query_params: query_params,
      operation_signing_strategy: operation_signing_strategy,
      body: post_body,
      return_type: 'Array<OCI::Audit::Models::AuditEvent>'
    )
  end
  # rubocop:enable Metrics/BlockLength
end

#logger ⇒ Logger

Returns The logger for this client. May be nil.

Returns:

  • (Logger) —

    The logger for this client. May be nil.



104
105
106
 
# File 'lib/oci/audit/audit_client.rb', line 104

def logger
  @api_client.config.logger
end

#update_configuration(compartment_id, update_configuration_details, opts = {}) ⇒ Response

Update the configuration

Parameters:

  • compartment_id (String) —

    ID of the root compartment (tenancy)

  • update_configuration_details (OCI::Audit::Models::UpdateConfigurationDetails) —

    The configuration properties

  • opts (Hash) (defaults to: {}) —

    the optional parameters

Options Hash (opts):

  • :retry_config (OCI::Retry::RetryConfig) —

    The retry configuration to apply to this operation. If no key is provided then the service-level retry configuration defined by #retry_config will be used. If an explicit nil value is provided then the operation will not retry

Returns:

  • (Response) —

    A Response object with data of type nil



256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
 
# File 'lib/oci/audit/audit_client.rb', line 256

def update_configuration(compartment_id, update_configuration_details, opts = {})
  logger.debug 'Calling operation AuditClient#update_configuration.' if logger

  raise "Missing the required parameter 'compartment_id' when calling update_configuration." if compartment_id.nil?
  raise "Missing the required parameter 'update_configuration_details' when calling update_configuration." if update_configuration_details.nil?

  path = '/configuration'
  operation_signing_strategy = :standard

  # rubocop:disable Style/NegatedIf
  # Query Params
  query_params = {}
  query_params[:compartmentId] = compartment_id

  # Header Params
  header_params = {}
  header_params[:accept] = 'application/json'
  header_params[:'content-type'] = 'application/json'
  # rubocop:enable Style/NegatedIf

  post_body = @api_client.object_to_http_body(update_configuration_details)

  # rubocop:disable Metrics/BlockLength
  OCI::Retry.make_retrying_call(applicable_retry_config(opts), call_name: 'AuditClient#update_configuration') do
    @api_client.call_api(
      :PUT,
      path,
      endpoint,
      header_params: header_params,
      query_params: query_params,
      operation_signing_strategy: operation_signing_strategy,
      body: post_body
    )
  end
  # rubocop:enable Metrics/BlockLength
end