Printing LPN Labels

When you configure the screen parameter “print-labels” as Inbound LPN Label, depending on different screen parameters, labels will be printed as described below:

In general, an LPN Label is printed after each LPN is received.
If the screen parameter “pallet-handling” is configured as Palletize after receipt, an LPN label is printed after each LPN is received on the pallet.
If the screen parameter “pallet-handling” is configured as LPN or Pallet receiving and if a pallet is received, then LPN labels are printed for all LPNs on the pallet after successful receipt of the pallet.
If the screen parameter “pallet-handling” is configured as Palletize Upfront, and if the pallet has more than one LPN, then LPN label is printed after each LPN is received on the pallet.
If the receiving option is configured to cross dock, an LPN label is printed as soon as the LPN is marked as received (LPN Status changes to received).
If the screen parameter “prompt-location” is configured as Prompt if not known, then the LPN Label is printed before the location is prompted.
If the screen parameter “lpn-prompt” is configured as Auto Generate, then an LPN Label is printed after each LPN is received.
If the screen parameter “lpn-prompt” is configured as Auto Generate and the screen parameter “single sku management” is configured as assume single sku/restrict multi sku and “mode” is configured as by-sku-scan, since the system creates an LPN after scanning the first SKU, an LPN Label is printed after the LPN is received.
Labels will be printed even if the LPN has been marked for QC.

Print Pallet Labels and Pack/Case Quantity Display Updates

Print Pallet Labels

You can now print pallet labels from a new screen parameter in various RF screens.

When the parameter is configured to Yes, the system processes to print pallet labels. This functionality is triggered by specific hot keys, allowing users to efficiently manage printing tasks directly from the system interface.

Steps to enable:

Set the Parameter to Yes:

Ensure that the parameter is set to "Yes" to enable the pallet label printing feature.

Trigger Label Printing:

Press the Ctrl-E hot key to initiate the 'End Pallet' process.
Upon pressing Ctrl-E, the system will automatically start printing the pallet label.
A confirmation message, "label print triggered for pallet%", will be displayed.

Change the Default Printer (If Needed):

If you need to change the default printer, use the Ctrl-P hot key.
Note that the Ctrl-P hot key is only enabled if the parameter is set to "Yes."

Add a Printer:

If no default printer is available, you will need to add a printer to proceed with label printing.

Print Pallet Labels in RF Palletize

You can print pallet labels from the Print Label screen parameter in the RF Palletize module (rf.inbound.cwrfpalletizeplt).

Parameter Details

Parameter Name	Parameter Type	Parameter Options	Default Behavior
Print Label	Selection	Blank \| Yes \| No	Blank (acts as No)

Steps to Enable

Set the Print Label parameter to Yes in the RF Palletize module.

Pack and Case Quantity Display Updates

The Pack and Case Quantity display is updated in several RF transactions. Refer to the Unit of Measure Reference Document for details on the screen changes.

Affected Modules

Module Name	Module Code
RF Receiving	`rf.inbound.cwrfrecvlpnload` \| `rf.inbound.cwrfrecvlpnshpmt`
RF Receive Single SKU	`rf.inbound.cwrfrecvsinglesku`
RF Split IBLPN	`rf.inbound.cwrfsplitcntr`
RF Distribute LPN	`rf.outbound.cwrfdistributelpn`
RF Pick IBLPN	`rf.outbound.cwrfpickiblpn`
RF Pick IBLPN Replenishment	`rf.inbound.cwrfpickiblpnreplen`
RF Pack NC Active	`rf.outbound.cwrfpackncactiveorder`
RF Pick Cart	`rf.outbound.cwrfpickcart`
RF Audit OBLPN	`rf.outbound.cwrfauditlpnplt`
RF QC	`rf.inbound.cwrfqccomplete`
RF Modify/Cancel OBLPN	`rf.outbound.cwrfmodcancelobcntr`
RF Distribute Replenishment	`rf.inbound.cwrfdistlpnreplen`

Note: If you use screen scrapers, please make the necessary changes accordingly.