155 TNS-00001 to TNS-12699
- TNS-00001: INTCTL: error while getting command line from the terminal
-
Cause: Improper standard input connection from the terminal.
- TNS-00002: INTCTL: error while starting the Interchange
-
Cause: The Interchange could not be started.
- TNS-00003: INTCTL: error while sending request to the Interchange
-
Cause: Improper command sent to the Interchange or the Interchange is not responding. Not normally visible to the user.
- TNS-00004: INTCTL: error while starting the Navigator
-
Cause: The Navigator could not be started.
- TNS-00005: INTCTL: error while sending request to the Navigator
-
Cause: The Navigator is not responding. Either the Navigator is not running or another process is responding.
- TNS-00006: INTCTL: HOST variable is not defined
-
Cause: The HOST variable was not set.
- TNS-00007: INTCTL: unknown host
-
Cause: The pointer HOST is set to an unknown hostname.
- TNS-00008: INTCTL: could not contact destination Navigator
-
Cause: Connection could not be properly established to a Navigator. This may be because the Navigator specified is not running or the Navigator addresses are incorrect.
- TNS-00009: INTCTL: could not contact destination Connection Manager
-
Cause: Connection could not be properly established to a Connection Manager. This may be because the Connection Manager (Interchange) specified is not running or the Connection Manager addresses are incorrect.
- TNS-00010: Error while flushing NS context
-
Cause: Internal NS error; connection may be lost.
- TNS-00011: INTCTL: error while starting the Connection Manager
-
Cause: The Connection Manager could not be started.
- TNS-00012: INTCTL: error while processing Connection Manager request
-
Cause: An improper command was sent to the Connection Manager or it is not responding. Not normally visible to the user.
- TNS-00013: INTCTL: error while performing NS disconnect command
-
Cause: Internal NS error. Error in closing down connections.
- TNS-00014: INTCTL: error while opening terminal input channel
-
Cause: Could not open standard terminal input. Internal error.
- TNS-00015: INTCTL: error while closing terminal input channel
-
Cause: Could not close terminal input channel. Internal error.
- TNS-00016: INTCTL: error while performing NS send command
-
Cause: Internal NS error. Connection may be lost.
- TNS-00017: INTCTL: error while performing NS receive command
-
Cause: Internal NS error. Connection may be lost.
- TNS-00018: INTCTL: TNS_ADMIN not defined
-
Cause: The TNS_ADMIN pointer is improperly set.
- TNS-00019: INTCTL: error initializing the national language interface
-
Cause: The message file could not be found.
- TNS-00020: INTCTL: missing NAVIGATOR_DATA in TNSNAV.ORA
-
Cause: TNSNAV.ORA does not contain the NAVIGATOR_DATA component.
- TNS-00021: INTCTL: missing INTERCHANGE_DATA in INTCHG.ORA
-
Cause: INTCHG.ORA does not contain an INTERCHANGE_DATA component.
- TNS-00022: INTCTL: missing CMANAGER_NAME in INTCHG.ORA
-
Cause: INTCHG.ORA does not contain a CMANAGER_NAME component.
- TNS-00023: INTCTL: missing ADDRESS(es) in config files
-
Cause: Configuration files do not contain an ADDRESS/ADDRESS_LIST component.
- TNS-00024: INTCTL: Unable to contact Navigator to obtain Connection Manager address
-
Cause: The Navigator is not running.
- TNS-00025: INTCTL: The ORACLE environment is not set up correctly
-
Cause: The ORACLE environment is incorrectly set up.
- TNS-00026: INTCTL: TNS_ADMIN directory set, and is being used
-
Cause: The TNS_ADMIN environment variable is set properly. INTCTL will use the TNS_ADMIN directory. This is only an informative message. If you do not want it to be used, and want the default directory to be used instead, then unset TNS_ADMIN and reexecute.
- TNS-00027: INTCTL: Could not resolve Navigator's name/address
-
Cause: The Navigator's name to address definition is missing.
- TNS-00028: INTCTL: Could not resolve Connection Manager's name/address
-
Cause: The Connection Manager's name does not have a definition that the Navigator knows about, nor is the name/address available in the TNSNAMES.ORA file. The name may also be incorrect in the INTCHG.ORA file.
- TNS-00031: INTCTL: internal NT error
-
Cause: Problem interfacing to the protocol adapters installed.
- TNS-00032: INTCTL: internal NS error
-
Cause: Problem interfacing with TNS.
- TNS-00033: INTCTL: internal NL error
-
Cause: Problem with internal TNS module NL.
- TNS-00034: INTCTL: internal NR error
-
Cause: Problem with internal Interchange routines.
- TNS-00035: INTCTL: error while constructing full file name
-
Cause: Problem while constructing the full path for a file name because the path name to the file or the environment variables are incorrect. Files looked up include TNSNAMES.ORA, TNSNAV.ORA, INTCHG.ORA and the error files for the Navigator and Connection Manager.
- TNS-00036: INTCTL: error reading from Navigator or Connection Manager error files
-
Cause: Problem while reading from Navigator or Connection Manager error files generated by the Navigator or Connection Manager when they fail to start.
- TNS-00037: INTCTL: error opening Navigator or Connection Manager error files
-
Cause: Failed to open Navigator or Connection Manager error files when they have failed to start.
- TNS-00038: INTCTL: Poorly formed address or command string
-
Cause: An unacceptable string was encountered while attempting to send a message to either the Navigator or Connection Manager. The addresses provided for either the Navigator or Connection Manager may be incorrectly constructed.
- TNS-00039: INTCTL: error while spawning a process
-
Cause: An error was encountered while spawning a process due to an internal operating system dependent problem. Machine resources may be limited.
- TNS-00040: INTCTL: failed to initialize trace context- Continuing anyway
-
Cause: Problem while opening specified trace file because of errors in INTCHG.ORA or because the user has incorrect privileges, or the file does not exist.
- TNS-00041: INTCTL: Navigator already running. Start operation cancelled
-
Cause: There is a Navigator already running and listening on the same addresses.
- TNS-00042: INTCTL: CMANAGER already running. Start operation cancelled
-
Cause: There is a Connection Manager already running and listening on the same addresses.
- TNS-00043: The CMANAGER has active connections, do you still want to stop it (y/n)?
-
Cause: The CMANAGER that is being stopped has active connections going through. This is the confirmation message.
- TNS-00044: INTCTL: You must have an INTCHG.ORA file to contact the Connection Manager
-
Cause: There was an attempt to contact a default Connection Manager (Interchange) where there was no INTCHG.ORA present in the correct directory.
- TNS-00045: INTCTL: Could not contact the Navigator on address
-
Cause: There was an attempt to contact a Navigator on a specific address which is not responding.
- TNS-00046: INTCTL: Could not contact the CMANAGER on address
-
Cause: There was an attempt to contact a CMANAGER on a specific address which is not responding.
- TNS-00060: INTCTL: Bad command: only the STATUS command can be used on remote Interchanges
-
Cause: The user entered a command that does not exist, or the user tried to make a request other than STATUS to a remote Interchange.
- TNS-00061: INTCTL: Bad command or syntax error: You must specify a trace level
-
Cause: The user did not specify a trace level.
- TNS-00062: INTCTL: Bad command or syntax error: For help type help/h/?
-
Cause: The user entered an invalid command.
- TNS-00063: INTCTL: Failed to allocate memory for buffers
-
Cause: INTCTL was unable to allocate memory for internal buffers.
- TNS-00064: INTCTL: Failed to find CMANAGER_NAME in INTCHG.ORA
-
Cause: INTCTL was unable to find the CMANAGER_NAME parameter in INTCHG.ORA.
- TNS-00065: INTCTL: Command cannot be executed remotely
-
Cause: A command other than status and version has been attempted remotely.
- TNS-00070: INTCTL usage: [intctl] command <process_name> [argument]\n
-
Cause: Help message displayed by INTCTL.
- TNS-00071: where command is one of following: \n
-
Cause: Help message displayed by INTCTL.
- TNS-00072: * start - start up process_name\n
-
Cause: Help message displayed by INTCTL.
- TNS-00073: * stop/abort - stop the process_name\n
-
Cause: Help message displayed by INTCTL.
- TNS-00074: * status - get statistics from the process_name\n
-
Cause: Help message displayed by INTCTL.
- TNS-00075: NOTE: the user may get the status info of a remote\n
-
Cause: Help message displayed by INTCTL.
- TNS-00076: component by specifying the component name in\n
-
Cause: Help message displayed by INTCTL.
- TNS-00077: the argument field\n
-
Cause: Help message displayed by INTCTL.
- TNS-00078: * log_on - ask process_name to turn logging on\n
-
Cause: Help message displayed by INTCTL.
- TNS-00079: * log_off - ask process_name to turn logging off\n
-
Cause: Help message displayed by INTCTL.
- TNS-00080: * force_log - ask process_name to dump its state\n
-
Cause: Help message displayed by INTCTL.
- TNS-00081: * trace_on - ask process name to turn tracing on\n
-
Cause: Help message displayed by INTCTL.
- TNS-00082: NOTE: the user MUST specify a trace level\n
-
Cause: Help message displayed by INTCTL.
- TNS-00083: (USER or ADMIN) in the argument field\n
-
Cause: Help message displayed by INTCTL.
- TNS-00084: * trace_off - ask process name to turn tracing off\n
-
Cause: Help message displayed by INTCTL.
- TNS-00085: * reread - ask the process name to reread parameter files\n
-
Cause: Help message displayed by INTCTL.
- TNS-00086: * reload - ask the Navigator to reload TNSNET.ORA\n
-
Cause: Help message displayed by INTCTL.
- TNS-00087: * version - ask the process name to display its version number\n
-
Cause: Help message displayed by INTCTL.
- TNS-00088: * exit - quit the Interchange controller\n\n
-
Cause: Help message displayed by INTCTL.
- TNS-00089: process_name is one of Interchange, CMANAGER, or Navigator\n
-
Cause: Help message displayed by INTCTL.
- TNS-00090: * Interchange - will ask the Interchange\n
-
Cause: Help message displayed by INTCTL.
- TNS-00091: * Navigator (or navgatr) - will ask the Navigator only\n
-
Cause: Help message displayed by INTCTL.
- TNS-00092: * CMANAGER (or intlsnr) - will ask the Cmanager only\n\n
-
Cause: Help message displayed by INTCTL.
- TNS-00093: argument is only supplied to either status or trace_on\n
-
Cause: Help message displayed by INTCTL.
- TNS-00094: * to status - argument is considered the remote process_name\n
-
Cause: Help message displayed by INTCTL.
- TNS-00095: * to trace_on - argument is considered the trace level\n\n
-
Cause: Help message displayed by INTCTL.
- TNS-00100: Unable to allocate memory
-
Cause: Out of memory on the machine.
- TNS-00101: File operation error
-
Cause: Error in accessing reading or writing a particular file.
- TNS-00102: Keyword-Value binding operation error
-
Cause: Not normally visible to the user. May indicate a shortage of memory.
- TNS-00103: Parameter file load error
-
Cause: Parameter file process failed.
- TNS-00104: Data stream open/access error
-
Cause: Unable to open or access data stream for either log or trace files for the Interchange.
- TNS-00105: Could not initialize tracing
-
Cause: The INTCHG.ORA file is improperly configured. Verify the trace parameters specified.
- TNS-00106: Failed to open log file
-
Cause: Unable to access or obtain write permission to create log file.
- TNS-00107: Unable to initialize TNS global data
-
Cause: Not normally visible to the user.
- TNS-00108: TNS_ADMIN not defined
-
Cause: TNS_ADMIN pointer is not set.
- TNS-00109: Message could not be printed; not enough memory
-
Cause: Printing of message failed due to lack of memory. Not normally visible to user.
- TNS-00110: Could not initialize network from file TNSNET.ORA
-
Cause: Poorly formed network information in network file.
- TNS-00111: Failed to get configuration data from file
-
Cause: Poorly formed configuration information in network files TNSNET.ORA or TNSNAV.ORA.
- TNS-00112: Failed to find configuration file name
-
Cause: Name specified for configuration file was incorrect.
- TNS-00113: Failed to open error log file
-
Cause: Could not open log file during startup of Navigator or Connection Manager due to read or write permission problems or non-existent error directory.
- TNS-00114: Internal error- Allocation of addresses not performed
-
Cause: Internal error. Should not normally occur.
- TNS-00115: Could not allocate pump global buffers
-
Cause: Not enough memory to allocate pump buffers.
- TNS-00116: Pump failed during initial bequeath
-
Cause: Error in assigning connection to a new pump. This error may be caused by insufficient machine resources.
- TNS-00117: Internal error- No data passed through pump
-
Cause: Internal error. Data expected has not arrived yet.
- TNS-00119: Missing PUMP_CONNECTIONS in INTCHG.ORA
-
Cause: No PUMP_CONNECTIONS parameter specified in INTCHG.ORA.
- TNS-00120: Missing PUMPS in INTCHG.ORA
-
Cause: No PUMPS parameter specified.
- TNS-00121: Missing CMANAGER_NAME in INTCHG.ORA
-
Cause: No CMANAGER_NAME parameter specified.
- TNS-00122: Missing ADDRESS(es) in TNSNET.ORA file
-
Cause: No ADDRESS or ADDRESS_LIST parameter specified in TNSNET.ORA.
- TNS-00123: Unable to perform a listen on configured ADDRESS(es)
-
Cause: Another process is already listening on this address or the ADDRESS is incorrectly defined.
- TNS-00124: Internal error - Unable to create empty address
-
Cause: - Internal error. Should not normally occur.
- TNS-00125: Failed to get number of Interchanges in TNSNET.ORA
-
Cause: Error in the TNSNET.ORA file.
- TNS-00126: Missing Connection Manager name and address in TNSNET.ORA
-
Cause: The Interchange name specified in INTCHG.ORA is not defined in the TNSNET.ORA file.
- TNS-00127: Missing Connection Manager name in TNSNET.ORA
-
Cause: One or more Connection Manager names are missing.
- TNS-00128: Missing COMMUNITY in TNSNET.ORA
-
Cause: One or more ADDRESSes does not have a COMMUNITY assigned.
- TNS-00129: Internal error - Failed to create new community
-
Cause: Internal Error. Should not normally occur. There may be a resource limitation problem on the machine.
- TNS-00130: Failed to create Interchange's internal address
-
Cause: There is an error in one of the addresses listed in TNSNET.ORA.
- TNS-00131: Missing COMMUNITY in COMMUNITY_COST_LIST in TNSNET.ORA
-
Cause: A COMMUNITY keyword-value pair is missing within the COMMUNITY_COST_LIST in TNSNET.ORA.
- TNS-00132: COST value must be an integer greater than 0
-
Cause: A community has been defined in TNSNET.ORA with a COST of 0.
- TNS-00133: Missing LOCAL_COMMUNITIES field in TNSNAV.ORA
-
Cause: Improperly configured TNSNAV.ORA file.
- TNS-00134: Missing COMMUNITY component in addresses for the Navigator in TNSNAV.ORA
-
Cause: The addresses specified for the Navigator have no COMMUNITY name.
- TNS-00135: Missing TNS error message file
-
Cause: No error message file present.
- TNS-00136: Did not register product/facility for TNS error message
-
Cause: Error message file error.
- TNS-00137: Failed to get TNS error message file entry
-
Cause: No TNS error message file present.
- TNS-00138: Failed to find ORACLE executable directory
-
Cause: The ORACLE environment is not correctly set.
- TNS-00139: Internal - Data passed from the Interchange listener is poorly formed
-
Cause: Internal error in Interchange.
- TNS-00140: Interchange specified was not found in network tables
-
Cause: Could not find the Interchange specified in a control request.
- TNS-00141: Failed to get file stream information
-
Cause: Error in the file stream package.
- TNS-00142: Community mismatch in TNSNAV.ORA
-
Cause: The communities in the LOCAL_COMMUNITIES entry in TNSNAV.ORA do not correspond with all the communities in the NAVIGATOR_ADDRESSES entry.
- TNS-00143: Illegal PREFERRED_CMANAGERS entry in TNSNAV.ORA
-
Cause: PREFERRED_CMANAGERS entry in the TNSNAV.ORA used by the Connection Manager. There should only be a PREFERRED_NAVIGATORS entry in the TNSNAV.ORA on an Interchange.
- TNS-00144: PUMP_CONNECTIONS value in INTCHG.ORA is too large.
-
Cause: The number of PUMP_CONNECTIONS specified in INTCHG.ORA is too large to be supported on this platform.
- TNS-00145: PUMPS value in INTCHG.ORA is too large.
-
Cause: The number of PUMPS specified in INTCHG.ORA is too large to be supported on this platform.
- TNS-00146: Internal-- Retry data request withing pump.
-
Cause: The data space provided in order to receive data from the pump is to small.
- TNS-00147: Failed to start a pre-spawned pump.
-
Cause: The Connection Manager was unable to start a pump during startup.
- TNS-00200: Unable to do nsanswer on context\nresult=string\n
-
Cause: Requester of service may have aborted or options negotiation failed.
- TNS-00201: Unable to read answer connection data :string:\n
-
Cause: Improperly formed connect data sent to the Interchange listener.
- TNS-00202: Failure in redirecting call : \nOriginal to string\n\t Redirect to string\n
-
Cause: Internal - error could not redirect call to a pump or other Interchange listener. The cause may be insufficient network or machine resources.
- TNS-00203: Unable to start tracing in intlsnr\n
-
Cause: Failure in setting up tracing for Interchange listener.
- TNS-00204: Started tracing in intlsnr\n
-
Cause: Internal message- Successfully started tracing information.
- TNS-00205: Turning off tracing in intlsnr\n
-
Cause: Internal message - Turned off tracing in the Interchange listener.
- TNS-00206: \n\nStatus Information for Interchange string:\n
-
Cause: Message sent back by Interchange as header for status request.
- TNS-00207: \tUptime : number days number hr. number min. number sec\n
-
Cause: Part of status request.
- TNS-00208: \tLogging : string\n
-
Cause: Part of status request.
- TNS-00209: \tTracing : string\n
-
Cause: Part of status request Interchange.
- TNS-00210: \tTotal Pumps Available : number\n
-
Cause: Part of status request for Connection Manager.
- TNS-00211: \tTotal Active Pumps : number\n
-
Cause: Part of status request for Connection Manager.
- TNS-00212: \tTotal Pumps Started : number\n
-
Cause: Part of status request for Connection Manager.
- TNS-00213: \tAvailable Connections : number\n
-
Cause: Part of status request for Connection Manager.
- TNS-00214: \tTotal Connections in Use : number\n
-
Cause: Part of status request for Connection Manager.
- TNS-00215: \tTotal Successful Connections : number\n
-
Cause: Part of status request for Connection Manager.
- TNS-00216: \tTotal Failed Connections : number\n
-
Cause: Part of status request for Connection Manager.
- TNS-00217: \tTotal Bytes of Data : number\n
-
Cause: Part of status request for Connection Manager.
- TNS-00218: \tCurrent Bytes/Sec. : number\n
-
Cause: Part of status request for Connection Manager.
- TNS-00219: \tPump Strategy : string\n
-
Cause: Part of status request.
- TNS-00220: \tPump Breakdown\n\t--------------\n
-
Cause: Part of status request.
- TNS-00221: \tPump Connections Total Data Bytes/Second\n
-
Cause: Part of status request.
- TNS-00222: \t-------------------------------------------------------------------\n
-
Cause: Part of status request.
- TNS-00223: \tnumbernumbernumbernumber\n
-
Cause: Part of status request.
- TNS-00224: No more connections available\n
-
Cause: More connections were made to the Interchange than are configured in INTCHG.ORA.
- TNS-00225: Unable to bequeath connection to pump\n
-
Cause: Unable to start a pump because either the executable cannot be found or too many processes aare currently running on a particular machine.
- TNS-00226: Unable to contact pump number to send broadcast message string\n
-
Cause: Could not call a particular pump.
- TNS-00227: Unable to contact pump; Connection Manager declared pump dead\n
-
Cause: A pump became an orphaned process. A protocol adapter is not working properly or machine network resources are being over used.
- TNS-00228: Failure in finding pump data\n
-
Cause: Internal problem with data passed back from pump.
- TNS-00229: Error in call: unable to deliver message\n:string:\nstring\nstring\nstring\n
-
Cause: Destination for call is unavailable.
- TNS-00230: Cannot start new pump process:\nstring\nstring\nProtocol Adapter errors:number
-
Cause: Unable to create a new process; possibly there are too many processes on the machine.
- TNS-00231: Pump is alive\n
-
Cause: Pump log message sent to Interchange listener.
- TNS-00232: Unable to setup connection\n
-
Cause: Error log message sent from pump to indicate failure in initiating connection because of errors in the call string: network problem or resource limitations.
- TNS-00233: Interchange failed to make contact with destination with errors:\nstring\nstring\nstring\n
-
Cause: Pump call to destination failed.
- TNS-00234: Connect data for failed call:\nCALL DATA =\nstring\nRECEIVE DATA = :string:\n
-
Cause: Connect data supplied for error 00233.
- TNS-00235: Aborting connection:\nProtocol Apapter errors:\nstring;number,number\nstring;number,number\n
-
Cause: Pump aborting connection because connection has been up too long, or some other network error on the connection.
- TNS-00236: Failed to initialize tracing\n
-
Cause: Pump failed to initialize tracing.
- TNS-00237: Failed to refuse connection\n
-
Cause: Connection may have aborted before error took place in Pump.
- TNS-00238: Pump number @: string:
-
Cause: Prepended message to all pump log messages.
- TNS-00239: Connection Manager has been stopped
-
Cause: Message sent back to control program from Interchange.
- TNS-00240: Connection Manager: Logging is now ON
-
Cause: Message sent back to control program from Interchange.
- TNS-00241: Connection Manager: Logging is now OFF
-
Cause: Message sent back to control program from Interchange.
- TNS-00242: Connection Manager: Tracing is now ON
-
Cause: Message sent back to control program from Interchange.
- TNS-00243: Connection Manager: Tracing is now OFF
-
Cause: Message sent back to control program from Interchange.
- TNS-00244: Connection Manager: Request Failed
-
Cause: Message sent back to control program from Interchange.
- TNS-00245: Connection Manager: Failed to open log file
-
Cause: Message sent back to control program from Interchange.
- TNS-00246: Connection Manager: Failed to start tracing
-
Cause: Message sent back to control program from Interchange.
- TNS-00247: Unable to allocate memory for configuration data from TNSNET.ORA file
-
Cause: Navigator failed to allocate enough memory for TNSNET.ORA configuration file.
- TNS-00248: Unable to get information from file :string:\nExiting with NR error:number\n
-
Cause: TNSNAV.ORA poorly configured or addresses provided are already being used by another application.
- TNS-00249: Unable to read network configuration data from file string\n with error:\n string\n
-
Cause: Network configuration file TNSNET.ORA is missing or poorly configured.
- TNS-00250: Navigator has been started\n
-
Cause: Message to log file on Navigator startup.
- TNS-00251: Failure in nstest: \n
-
Cause: NS test operation failed due to internal error.
- TNS-00252: Unable to handle route request:\nstring\n
-
Cause: Command requested did not exist.
- TNS-00253: Error in reading network configuration data from file string\n with error\nstring\n
-
Cause: TNSNET.ORA is poorly configured or nonexistent.
- TNS-00254: Navigator has been stopped\n
-
Cause: Message sent to Interchange control program by Navigator confirming it has been stopped.
- TNS-00255: Closing down log, stopping Navigator\n
-
Cause: Log message when Navigator is stopped.
- TNS-00256: Status of Navigator:\n
-
Cause: Navigator status message component
- TNS-00257: \tNumber of Successful Requests : number\n
-
Cause: Navigator status message component
- TNS-00258: \tNumber of Failed Requests : number\n
-
Cause: Navigator status message component
- TNS-00259: \tDisabled Interchange list:\n\t\n
-
Cause: Navigator status message component
- TNS-00260: \t-------------------------------------------------------------------\n
-
Cause: Navigator status message component
- TNS-00261: \tInterchange Name Community Link Down Time Remaining (secs) \n
-
Cause: Navigator status message component
- TNS-00262: stringstringnumber\n
-
Cause: Navigator status message component
- TNS-00263: Navigator: Request Failed
-
Cause: Response from Navigator when a particular request failed.
- TNS-00264: Navigator: Failed to reload configuration data
-
Cause: Message sent to the Interchange control program when reload of network configuration failed. TNSNET.ORA Poorly configured or missing.
- TNS-00265: Navigator: Reloaded network configuration data
-
Cause: Message sent to Interchange control program when reload of network is successful.
- TNS-00266: Navigator: Unknown Request
-
Cause: Request was made to Navigator that it knows nothing about.
- TNS-00267: Navigator: Internal Error
-
Cause: Generated when a request was made to the Navigator it knows nothing about.
- TNS-00268: ON
-
Cause: On component of message.
- TNS-00269: OFF
-
Cause: Off component of message.
- TNS-00270: string: Terminal Error\nstring\n
-
Cause: Message put out in error file of executable when it fails to start.
- TNS-00271: Connection Manager
-
Cause: Name of the Connection Manager.
- TNS-00272: Navigator
-
Cause: Name for the Navigator.
- TNS-00273: Navigator: Logging is now ON
-
Cause: Message sent back to control program from Navigator.
- TNS-00274: Navigator: Logging is now OFF
-
Cause: Message sent back to control program from Navigator.
- TNS-00275: Navigator: Tracing is now ON
-
Cause: Message sent back to control program from Navigator.
- TNS-00276: Navigator: Tracing is now OFF
-
Cause: Message sent back to control program from Navigator.
- TNS-00277: Navigator: Request Failed
-
Cause: Message sent back to control program from Navigator.
- TNS-00278: Navigator: Failed to Open Log file
-
Cause: Message sent back to control program from Navigator.
- TNS-00279: Navigator: Failed to Start Tracing
-
Cause: Message sent back to control program from Navigator.
- TNS-00280: \tMax Avg Bytes/Sec : number\n
-
Cause: Part of status request for Connection Manager.
- TNS-00281: Connection Manager: Forced Log output\n
-
Cause: Message sent back to control program from Connection Manager.
- TNS-00282: Connection Manager: Failed to force log, logging is off\n
-
Cause: Message sent back to control program from Connection Manager.
- TNS-00283: \nListening on the following TNS addresses:\n\n
-
Cause: Message sent back to control program from Connection Manager.
- TNS-00284: \tImm Max Avg Bytes/Sec : number\n
-
Cause: Part of status request for Connection Manager.
- TNS-00285: \tAvg Connect Time (secs) : number\n
-
Cause: Part of status request for Connection Manager.
- TNS-00286: \tMax Connect Time (secs) : number\n
-
Cause: Part of status request for Connection Manager.
- TNS-00287: \tMin Connect Time (secs) : number\n
-
Cause: Part of status request for Connection Manager.
- TNS-00288: Navigator: Failed to Disable Interchange
-
Cause: Message sent back to control program from Navigator.
- TNS-00289: Navigator: Disabled Interchange
-
Cause: Message sent back to control program from Navigator.
- TNS-00290: Navigator: Failed to Enable Interchange
-
Cause: Message sent back to control program from Navigator.
- TNS-00291: Navigator: Enabled Interchange
-
Cause: Message sent back to control program from Navigator.
- TNS-00292: \tLog File Name :\n\t\tstring\n
-
Cause: Message sent back to control program showing log file name
- TNS-00293: \tTrace File Name :\n\t\tstring\n
-
Cause: Message sent back to control program showing trace file name
- TNS-00294: Connection Manager: Security is enabled, you cannot STOP the Interchange\n
-
Cause: Message sent back to control program indicating that the connection manager is secure.
- TNS-00295: Navigator: Security is enabled, you cannot STOP the Navigator\n
-
Cause: Message sent back to control program indicating that the Navigator is secure.
- TNS-00296: \tStoppable : string\n
-
Cause: Message sent back to control program indicating whether program can be stopped.
- TNS-00297: \tLogging Level : string\n
-
Cause: Message sent back to control program indicating whether program can be stopped.
- TNS-00298: Request to Navigator:\nstring\n
-
Cause: Log entry for request to Navigator.
- TNS-00299: Response from Navigator:\nstring\n
-
Cause: Log entry for request to Navigator.
- TNS-00300: ***Disabling Interchange : string\n
-
Cause: Log entry for disabling a particular Interchange.
- TNS-00301: ***Enabling Interchange : string\n
-
Cause: Log entry for disabling a particular Interchange.
- TNS-00302: Connection Manager: Unknown Request
-
Cause: Request sent by Interchange control program is unknown.
- TNS-00303: Connection Manager: Reread parameter data
-
Cause: Request sent by control manager to control programming indicating that parameter data was read.
- TNS-00304: Status Information for Connection Manager:\n
-
Cause: Message sent back by Interchange as header for status request.
- TNS-00305: The Navigator encountered an invalid/unknown trace level\n
-
Cause: Message sent back by the Navigator indicating an invalid trace level.
- TNS-00306: Connection Manager encountered an invalid/unknown trace level\n
-
Cause: Message sent back by the Connection Manager indicating an invalid trace level.
- TNS-00307: Navigator: Reread parameter data
-
Cause: Request sent by the Navigator to control program indicating that parameter data was read.
- TNS-00308: Navigator: Failed to open log while rereading parameter data
-
Cause: Request sent by the Navigator to control program indicating that it could not reopen log file after rereading parameter data.
- TNS-00309: Connection Manager: Failed to open log while re-reading parameter data
-
Cause: Request sent by the Connection Manager to control program indicating that it could not reopen log file after rereading parameter data.
- TNS-00310: Navigator: Failed to start tracing after rereading parameter data
-
Cause: Message sent back to control program from Navigator.
- TNS-00311: Connection Manager: Failed to start tracing after rereading parameter data
-
Cause: Message sent back to control program from Connection Manager.
- TNS-00312: Connection Manager: Failed to get version information
-
Cause: Message sent back to control program from Connection Manager.
- TNS-00313: Navigator: Failed to get version information
-
Cause: Message sent back to control program from Connection Manager.
- TNS-00314: Protocol Adapter Errors: number,number\n
-
Cause: Protocol Adapter errors which go with message 233
- TNS-00315: Failed to allocate larger connect data area for getting pump data: number\n
-
Cause: Could not allocate a large enough area to get pump statistics; continue without them.
- TNS-00316: Ran out of data buffers in the pump\n
-
Cause: The Interchange is resource limited by having too few data buffers in the pump.
- TNS-00317: Failed to contact Connection Manager
-
Cause: Connection Manager is not running.
- TNS-00501: Cannot allocate memory
-
Cause: Sufficient memory could not be allocated to perform the desired activity.
- TNS-00502: Invalid argument
-
Cause: An internal function received an invalid parameter.
- TNS-00503: Illegal ADDRESS parameters
-
Cause: An illegal set of protocol adapter parameters was specified.
- TNS-00504: Operation not supported
-
Cause: An internal function received a request to perform an operation that is not supported (on this machine).
- TNS-00505: Operation timed out
-
Cause: The requested operation could not be completed within the timeout period.
- TNS-00506: Operation would block
-
Cause: An internal operation did not commence because to do so would block the current process and the user has requested that operations be non-blocking.
- TNS-00507: Connection closed
-
Cause: Normal "end of file" condition has been reached; partner has disconnected.
- TNS-00508: No such protocol adapter
-
Cause: The protocol adapter requested for this connection does not exist.
- TNS-00509: Buffer overflow
-
Cause: Too much data for buffer.
- TNS-00510: Internal limit restriction exceeded
-
Cause: Too many files or sockets open simultaneously (or some other resource has been depleted).
- TNS-00511: No listener
-
Cause: The connect request could not be completed because no application is listening on the address specified, or the application is unable to service the connect request in a sufficiently timely manner.
- TNS-00512: Address already in use
-
Cause: Specified listener address is already being used.
- TNS-00513: Destination host unreachable
-
Cause: Contact cannot be made with remote party.
- TNS-00514: Contexts have different wait/test functions
-
Cause: Two protocol adapters have conflicting wait/test functions.
- TNS-00515: Connect failed because target host or object does not exist
-
Cause: The address specified is not valid, or the program being connected to does not exist.
- TNS-00516: Permission denied
-
Cause: User has insufficient privileges to perform the requested operation.
- TNS-00517: Lost contact
-
Cause: Partner has unexpectedly gone away.
- TNS-00518: Incomplete read or write
-
Cause: A data send or receive failed.
- TNS-00519: Operating system resource quota exceeded
-
Cause: The current user has exceeded the allotted resource assigned in the operating system.
- TNS-00520: Syntax error
-
Cause: The supplied connect descriptor contains illegal syntax.
- TNS-00521: Missing keyword
-
Cause: The supplied connect descriptor is missing one or more TNS keywords.
- TNS-00522: Operation was interrupted
-
Cause: An internal operation was interrupted and could not complete.
- TNS-00523: Previous operation was busy
-
Cause: Operation tried could not be successfully completed because the requested resource was busy.
- TNS-00524: Current operation is still in progress
-
Cause: Internal operation is still in progress but will complete.
- TNS-00525: Insufficient privilege for operation
-
Cause: Operating system failed to complete operation because user lacked sufficient privileges.
- TNS-00526: No caller (false async event)
-
Cause: Internal error.
- TNS-00527: Protocol Adapter not loadable
-
Cause: On some platforms (for example OS/2) protocol adapters are loaded at run-time. If the shared library (or DLL) for the protocol adapter is missing or one of its supporting libraries is missing, then this error is returned.
- TNS-00528: Protocol Adapter not loaded
-
Cause: On some platforms (for example OS/2) protocol adapters are loaded at run-time. If the shared library (or DLL) for the protocol adapter has not been loaded, then this error is returned.
- TNS-00530: Protocol adapter error
-
Cause: A generic protocol adapter error occurred.
- TNS-00532: No previous async operation to wait on
-
Cause: Internal protocol adapter error.
- TNS-00533: Connection dissolved or not yet made
-
Cause: Internal protocol adapter error.
- TNS-00534: Failed to grant connection ownership to child
-
Cause: Internal protocol adapter error.
- TNS-00535: Failed to send or receive disconnect message
-
Cause: Internal protocol adapter error.
- TNS-00536: Connection entered inappropriate state
-
Cause: Internal protocol adapter error.
- TNS-00537: Index into protocol adapter table is out of legal range
-
Cause: Internal protocol adapter error.
- TNS-00539: Network or Protocol services are down
-
Cause: The Network services on or from your node are not running or have stopped running.
- TNS-00540: SSL protocol adapter failure
-
Cause: The SSL protocol adapter encountered an error.
- TNS-00541: underlying transport does not exist.
-
Cause: The SSL protocol adapter was unable to locate an adapter for the protocol that it is going to use as the data transport.
- TNS-00542: SSL Handshake failed
-
Cause: The SSL protocol adapter was unable to connect to another process.
- TNS-00543: internal error
-
Cause: The SSL protocol adapter encountered an unexpected error.
- TNS-00544: unsupported operation
-
Cause: The SSL adapter could not perform a given command.
- TNS-00545: parameter retrieval failure
-
Cause: The SSL protocol adapter was not able to retrieve a configuration parameter for some reason.
- TNS-00546: control failure
-
Cause: The SSL protocol adapter was unable to perform a command.
- TNS-00547: user information retrieval failed
-
Cause: The SSL protocol adapter was unable to retrieve information about the remote user.
- TNS-00548: value specified for client authentication parameter is not boolean
-
Cause: The value specified for the parameter that specifies that SSL client authentication is to be used was not boolean.
- TNS-00549: value specified for the SSL version is not valid
-
Cause: The value specified for the SSL version is not valid.
- TNS-00550: disconnection error
-
Cause: The SSL protocol adapter encountered an error when the underlying transport disconnected.
- TNS-00551: underlying transport connection failed
-
Cause: The underlying transport adapter used by the SSL adapter failed to connect.
- TNS-00552: no valid cipher suites were specified
-
Cause: SSL cipher specs were specified, but none were valid.
- TNS-00553: read failed
-
Cause: The SSL adapter failed to read data from its connection.
- TNS-00554: write failed
-
Cause: The SSL adapter failed to send data over its connection.
- TNS-00555: no directory specified for wallet resource locator
-
Cause: It was specified that a file was to be used from which to retrieve a wallet, but no directory was specified for the wallet.
- TNS-00556: no method specified for wallet retrieval
-
Cause: A wallet resource locator was specified, but no method was given for the retrieval of the wallet.
- TNS-00557: unsupported wallet retrieval method
-
Cause: The method specified for wallet retrieval is not supported. Currently, only files are supported for wallet retrieval.
- TNS-00558: Entrust login failed
-
Cause: Entrust failed to authenticate the username, password, and/or profile name that was presented.
- TNS-00559: load of Entrust certificate failed
-
Cause: An error occurred while attempting to validate the provided Entrust certificate.
- TNS-00560: extraction of name from Entrust certificate failed
-
Cause: An error occurred while attempting to extract a name from an Entrust certificate.
- TNS-00563: could not parse SSL_CIPHER_SUITES
-
Cause: An error occurred while attempting to parse SSL_CIPHER_SUITES in sqlnet.ora.
- TNS-00565: SSL protocol adapter failed to locate wallet
-
Cause: An error occurred while attempting to locate wallet for SSL/TLS
- TNS-00566: SSL protocol adapter failed to open wallet
-
Cause: An error occurred while attempting to open wallet for SSL/TLS
- TNS-00580: Read failed due to closed or invalid transport connection
-
Cause: Read attempt was made on a transport connection which was previously terminated or is somehow deemed to be invalid.
- TNS-00581: Send failed due to timeout
-
Cause: The send operation did not complete within the allowed time interval.
- TNS-00582: Receive failed due to timeout
-
Cause: The receive operation did not complete within the allowed time interval.
- TNS-00583: Valid node checking: unable to parse configuration parameters
-
Cause: Valid node checking was unable to parse the configuration due to syntactical errors.
- TNS-00584: Valid node checking configuration error
-
Cause: Valid node checking specific Oracle Net configuration is invalid.
- TNS-00586: Operation aborted due to interruption
-
Cause: The operation is aborted because it is interrupted by the upper layer.
- TNS-00587: Invalid HTTP response or response parse error.
-
Cause: HTTP upgrade response got either invalid HTTP Status line or the response headers are invalid.
- TNS-00588: Invalid HTTP request or request parse error.
-
Cause: HTTP upgrade request got either invalid HTTP request line or the request headers are invalid.
- TNS-00589: Websocket upgrade request failed
-
Cause: HTTP upgrade failed either becuase the server does not support or the request cannot be fulfilled at this time.
- TNS-01000: spawn [<listener_name>] <spawn_alias> [<(ARGUMENTS='arg0, arg1,...')>]\n
-
Cause: Control program usage message.
- TNS-01001: start [<listener_name>] : start listener\n
-
Cause: Control program usage message.
- TNS-01002: stop [<listener_name>] : stop listener\n
-
Cause: Control program usage message.
- TNS-01003: status [<listener_name>] : get the status of listener\n
-
Cause: Control program usage message.
- TNS-01004: reload [<listener_name>] : reload the parameter files and SIDs\n
-
Cause: Control program usage message.
- TNS-01005: trace OFF | USER | ADMIN | SUPPORT [<listener_name>] : set tracing to the specified level\n
-
Cause: Control program usage message.
- TNS-01006: set password : set the password for subsequent calls\n
-
Cause: Control program usage message.
- TNS-01007: quit | exit : exit LSNRCTL\n
-
Cause: Control program usage message.
- TNS-01008: version [<listener_name>] : get the version information of the listener\n
-
Cause: Control program usage message.
- TNS-01009: service [<listener_name>] : get the service information of the listener\n
-
Cause: Control program usage message.
- TNS-01013: set|show trc_{ } [value]: set|show trace parameters of current listener\n
-
Cause: Control program usage message.
- TNS-01014: set|show log_{ } [value]: set|show log parameters of current listener\n
-
Cause: Control program usage message.
- TNS-01015: set|show parm_name [value]: sets|shows current listener parm values\n
-
Cause: Control program usage message.
- TNS-01016: change_password [<listener_name>]: changes the password of the listener\n
-
Cause: Control program usage message.
- TNS-01017: set|show current_listener [<listener_name>]: sets|shows current listener\n
-
Cause: Control program usage message.
- TNS-01018: save_config [<listener_name>]: saves configuration changes to parameter file\n
-
Cause: Control program usage message.
- TNS-01019: set rawmode ON | OFF: set output mode for services and status commands\n
-
Cause: Control program usage message.
- TNS-01020: STATUS of the LISTENER\n
-
Cause: Control program status message.
- TNS-01021: ------------------------\n
-
Cause: Control program status message.
- TNS-01022: Alias string\n
-
Cause: Control program status message.
- TNS-01023: Version string\n
-
Cause: Control program status message.
- TNS-01024: Trace Level string\n
-
Cause: Control program status message.
- TNS-01025: Security string\n
-
Cause: Control program status message.
- TNS-01026: Start Date string\n
-
Cause: Control program status message.
- TNS-01027: Listener Trace File string\n
-
Cause: Control program status message.
- TNS-01028: Listener Log File string\n
-
Cause: Control program status message.
- TNS-01029: Services Summary...\n
-
Cause: Control program status message.
- TNS-01030: The listener supports no services\n
-
Cause: Control program status message.
- TNS-01031: Service ACLs Summary...\n
-
Cause: Control program status message.
- TNS-01033: Listener Parameter File string\n
-
Cause: Control program status message.
- TNS-01034: Uptime number days number hr. number min. number sec\n
-
Cause: Control program status message.
- TNS-01036: string established:string refused:string
-
Cause: Control program status message.
- TNS-01037: "string" established:string refused:string
-
Cause: Control program status message.
- TNS-01038: string established:string refused:string current:string max:string state:string
-
Cause: Control program status message.
- TNS-01039: string\t\thas string service handler(s)
-
Cause: Control program status message.
- TNS-01040: SNMP string\n
-
Cause: Control program status message.
- TNS-01041: string parameter "string" set to string\n
-
Cause: Control program status message.
- TNS-01042: Current Listener is string\n
-
Cause: Control program status message.
- TNS-01043: Password changed for string\n
-
Cause: Control program status message.
- TNS-01044: string(Registered)\t\thas string service handler(s)
-
Cause: Control program status message.
- TNS-01045: string(Not Registered)\t\thas string service handler(s)
-
Cause: Control program status message.
- TNS-01046: Saved string configuration parameters.\n
-
Cause: Control program status message.
- TNS-01047: Old Parameter File string\n
-
Cause: Control program status message.
- TNS-01048: No changes to save for string.\n
-
Cause: Control program status message.
- TNS-01049: string (string)\t\thas string service handler(s)
-
Cause: Control program status message.
- TNS-01050: string
-
Cause: Control program general message.
- TNS-01052: The command completed successfully\n
-
Cause: Control program general message.
- TNS-01053: Connecting to string\n
-
Cause: Control program general message.
- TNS-01054: Contacted the listener successfully\n
-
Cause: Control program general message.
- TNS-01055: Successfully stopped the listener\n
-
Cause: Control program general message.
- TNS-01057: Program name: string\n
-
Cause: Control program general message.
- TNS-01058: Arguments : string\n
-
Cause: Control program general message.
- TNS-01059: Environment : string\n
-
Cause: Control program general message.
- TNS-01060: The password has has been set to: string\n
-
Cause: Control program general message.
- TNS-01061: The password has not been set\n
-
Cause: Control program general message.
- TNS-01062: The db subagent is already running.\n
-
Cause: Control program general message.
- TNS-01063: The db subagent is not started.\n
-
Cause: Control program general message.
- TNS-01064: Listener configuration changes will not be persistent\n
-
Cause: Configuration changes to the listener will not be visible when the listener starts up again as the check-pointing has been turned off in listener.ora
- TNS-01065: Raw mode is string\n
-
Cause: Control program general message.
- TNS-01066: Presentation: string
-
Cause: Listener starting message.
- TNS-01067: Service display mode is string\n
-
Cause: Control program general message.
- TNS-01070: Starting string: please wait...\n\n
-
Cause: Listener starting message.
- TNS-01071: string is set to string\n
-
Cause: Listener starting message.
- TNS-01072: Started at string\n
-
Cause: Listener starting message.
- TNS-01073: Listening on: string\n
-
Cause: Listener starting message.
- TNS-01074: Error listening on: string\n
-
Cause: Listener starting message.
- TNS-01075: Opened log file: string\n
-
Cause: Listener starting message.
- TNS-01076: Opened trace file: string\n
-
Cause: Listener starting message.
- TNS-01077: Opened parameter file: string\n
-
Cause: Listener starting message.
- TNS-01078: Opened name lookup file: string\n
-
Cause: Listener starting message.
- TNS-01079: Attempted to bequeath: string\n
-
Cause: Listener starting message.
- TNS-01080: Listener failed to start. See the error message(s) above...\n\n
-
Cause: Listener starting message.
- TNS-01081: Started with pid=string\n
-
Cause: Listener starting message.
- TNS-01082: Running in PROXY mode\n
-
Cause: Listener starting message.
- TNS-01083: Running in GSM mode\n
-
Cause: Listener starting message.
- TNS-01089: string * string * string * string * string * string * number * string
-
Cause: Listener logging message.
- TNS-01090: No longer listening on: string\n
-
Cause: Listener logging message.
- TNS-01091: Listener(VNCR option number) rejected Registration request from destination string\n
-
Cause: Listener logging message.
- TNS-01092: string * string * string * string * number
-
Cause: Listener logging message.
- TNS-01093: string * string * number
-
Cause: Listener logging message.
- TNS-01094: string * number
-
Cause: Listener logging message.
- TNS-01095: string * string * string * number
-
Cause: Listener logging message.
- TNS-01096: string * string * string * string * string * number
-
Cause: Listener logging message.
- TNS-01097: \nTIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
-
Cause: Listener logging message.
- TNS-01098: TIMESTAMP * CONNECT DATA * ADDRESS * [PRESENTATION *] COMMAND * ERROR\nTIMESTAMP * [INSTANCE NAME *] [ADDRESS *] [PRESENTATION *] COMMAND * ERROR\n-------------------------------------------------------------------------------
-
Cause: Listener logging message.
- TNS-01099: string * string * string * string * number
-
Cause: Listener logging message.
- TNS-01100: TNS returned error number when attempting to start the listener
-
Cause: The bequeath (BEQ) mechanism that LSNRCTL uses to start the listener failed.
- TNS-01101: Could not find listener name or service name string
-
Cause: The listener name or service name could not be resolved by name-lookup.
- TNS-01102: TNS application contacted was not the listener
-
Cause: Another TNS application such as the Interchange was listening at the address contacted. There may be another TNS application listening at the address contacted and the data returned is not in the appropriate format.
- TNS-01103: Protocol specific component of the address is incorrectly specified
-
Cause: The ADDRESS used to contact the listener is not correctly specified. This error occurs because the address fails to specify the destination of the listener. The address is well formed (for example, there are no missing parentheses) but it is missing a protocol specific component. For example, this is the error returned when the HOST component is missing from a TCP/IP address string.
- TNS-01106: Listener using listener name string has already been started
-
Cause: Another listener is already listening on one of the ADDRESSes specified.
- TNS-01107: A valid trace level was not specified
-
Cause: Failed to specify a valid trace level for the LSNRCTL trace command.
- TNS-01108: Listener password prompt failed
-
Cause: Password not entered via tty
- TNS-01109: Listener password encryption failed
-
Cause: Possibly garbled password entered
- TNS-01110: Mismatch - password unchanged
-
Cause: New password and reentered new password are different"
- TNS-01111: Log status can either be ON or OFF
-
Cause: Failed to specify a log status value for the LSNRCTL log_status command.
- TNS-01112: Plug and play can either be ON or OFF
-
Cause: Failed to specify a valid value for the LSNRCTL use_plugandplay command.
- TNS-01113: save_config_on_stop can either be ON or OFF
-
Cause: Failed to specify a valid value for the LSNRCTL save_config_on_stop command.
- TNS-01114: LSNRCTL could not perform local OS authentication with the listener
-
Cause: LSNRCTL failed to obtain system resources (heap memory, or shared memory) needed to perform local OS authentication with the listener.
- TNS-01115: OS error string creating shared memory segment of string bytes with key string
-
Cause: The shared memory segment could not be created as requested. For example, a segment with the provided key may already exist, or the size may be outside of system allowed range.
- TNS-01116: Listener alias name given as connect identifier is too long
-
Cause: The listener alias name you were attempting to resolve was too long.
- TNS-01117: Invalid argument was specified for stop command
-
Cause: Failed to specify a valid argument for the LSNRCTL stop command.
- TNS-01150: The address of the specified listener name is incorrect
-
Cause: The address on which the listener attempted to listen contains a syntax error.
- TNS-01151: Missing listener name, string, in LISTENER.ORA
-
Cause: The listener could not find the listener name specified.
- TNS-01152: All addresses specified for the listener name, string, failed
-
Cause: The listener failed to listen on any of the specified addresses.
- TNS-01153: Failed to process string: string
-
Cause: The string specified is not well-formed.
- TNS-01154: SID detected in old format that is no longer supported
-
Cause: One of the SIDs was specified in an obsolete format.
- TNS-01155: Incorrectly specified SID_LIST_string parameter in LISTENER.ORA
-
Cause: SID_LIST_<listener_name> in LISTENER.ORA has an error in it.
- TNS-01156: Missing or inappropriate PROTOCOL, TIMEOUT or POOL_SIZE parameter from PRESPAWN_DESC
-
Cause: PRESPAWN_DESC in each SID_DESC does not have required fields.
- TNS-01157: Can only listen on number addresses - ignoring string
-
Cause: Too many addresses were given to listen on.
- TNS-01158: Internal connection limit reached, preventing dispatcher from connecting
-
Cause: The internal Oracle Net connection list is full. Too many dispatchers are connected to the listener; therefore, no more dispatchers are allowed to connect.
- TNS-01159: Internal connection limit has been reached; listener has shut down
-
Cause: The internal Oracle Net connection list is full. The listener is configured to use too many Oracle Net connections.
- TNS-01160: Trace level was not specified
-
Cause: Failed to specify a trace level for the trace command.
- TNS-01161: Spawn alias string was not found. Check listener parameter file
-
Cause: The alias specified to spawn a program was not found in LISTENER.ORA.
- TNS-01162: Syntax error in the address resolved from the spawn alias: string
-
Cause: The alias specified to spawn a program was not a valid NVstring.
- TNS-01163: Failed to spawn process: string
-
Cause: The process failed to start correctly.
- TNS-01164: No spawn alias sent to listener
-
Cause: The spawn command was issued without an alias.
- TNS-01165: Spawn alias has no program name set in it
-
Cause: The spawn alias in LISTENER.ORA is incorrectly specified.
- TNS-01166: Listener rejected registration or update of service ACL
-
Cause: Received registration or update information could not be processed because it was invalid, or an internal error occurred.
- TNS-01167: The command string is not supported by the listener contacted
-
Cause: The listener does not recognize the command.
- TNS-01168: Cannot allocate memory
-
Cause: Sufficient memory could not be allocated to perform the desired activity.
- TNS-01169: The listener has not recognized the password
-
Cause: The listener has the password security mechanism enabled and requires the correct password to execute any command other than VERSION. The user attempted to issue one of the privileged administrative commands, but could not be successfully authenticated with the password provided.
- TNS-01170: Event detection broke for address: string
-
Cause: The event detection mechanism for the address specified returned an error.
- TNS-01171: Event detection broke for dispatcher: string
-
Cause: The event detection mechanism for the dispatcher specified returned an error.
- TNS-01172: Listener has shut down since all listen addresses have been deallocated
-
Cause: The event detection mechanism broke and caused all listen addresses to be removed.
- TNS-01173: Missing or inappropriate PRESPAWN_MAX parameter from SID_DESC
-
Cause: PRESPAWN_MAX in each SID_DESC does not have required fields.
- TNS-01174: The sum of the POOL_SIZEs from each PRESPAWN_DESC is greater than the PRESPAWN_MAX
-
Cause: The minimum value for PRESPAWN_MAX should be the sum of the POOL_SIZEs.
- TNS-01175: Password unchanged\n
-
Cause: Unable to set the new password
- TNS-01176: Error in loading the new parameter value\n
-
Cause: Illegal values given for the parameters
- TNS-01177: Log Status is OFF. Log file/directory unchanged\n
-
Cause: Log status needs to be set ON for changing the log file
- TNS-01178: Trace Level is 0. Trace file/directory unchanged\n
-
Cause: Trace Level needs to be set for changing the trace file/directory
- TNS-01179: Listener cannot load instance class "string"\n
-
Cause: Instance tried to register as a class unknown to listener.
- TNS-01180: Missing listener object string in Directory Server
-
Cause: The listener could not find the listener object specified.
- TNS-01181: Internal registration connection limit reached
-
Cause: The number of registration connections has reached the maximum. No more registrations are allowed until some of the existing registration connections are completed.
- TNS-01182: Listener rejected registration of service "string"
-
Cause: Received registration information could not be processed because it was invalid, or an internal error occurred.
- TNS-01183: Listener rejected registration or update of instance "string"
-
Cause: Received registration or update information could not be processed because it was invalid, or an internal error occurred.
- TNS-01184: Listener rejected registration or update of service handler "string"
-
Cause: Received registration or update information could not be processed because it was invalid, or an internal error occurred.
- TNS-01185: Registration attempted from a remote node
-
Cause: It was determined that the registering instance is not located on the same node as the listener. It is required that the instance be colocated with the listener for this type of service registration.
- TNS-01186: Client connection was dropped based on a filtering rule
-
Cause: Listener was configured with a filtering rule which explicitly specified that the client connection should be terminated without returning an error to the client.
- TNS-01187: No proxy service handler available
-
Cause: One of the following conditions has occurred: - the proxy service was not registered - the proxy service was registered, but was blocking new connections - all of the registered proxy service handlers were blocking new connections
- TNS-01188: Listener cannot operate with incompatible transport protocols
-
Cause: Listener was configured with multiple listening addresses with different and incompatible transport protocols. Listener cannot operate efficiently in such configuration.
- TNS-01189: The listener could not authenticate the user
-
Cause: The user attempted to issue a privileged administrative command, but could not be successfully authenticated by the listener using the local OS authentication mechanism. This may occur due to one of the following reasons: 1. The user is running a version of LSNRCTL that is lower than the version of the listener. 2. The user is attempting to administer the listener from a remote node. 3. The listener could not obtain the system resources needed to perform the authentication. 4. The local network connection between the listener and LSNRCTL was terminated unexpectedly during authentication message exchange, such as if LSNRCTL program was suddenly aborted. 5. The communication between the listener and LSNRCTL is being intercepted by a malicious user. 6. The software that the user is running is not following the authentication protocol, indicating a malicious user.
- TNS-01190: The user is not authorized to execute the requested listener command
-
Cause: Most of the listener administrative commands are only intended to be issued by privileged users, for example DBAs or system administrators. If the listener password is not set, then the listener only accepts administrative requests from LSNRCTL running with the same OS credentials, or running as a local administrator (also referred to as super user).
- TNS-01191: Failed to initialize the local OS authentication subsystem
-
Cause: Initialization of the security subsystem failed during listener startup or reload. The listener could not obtain system resources (memory, or file descriptors) needed for local OS authentication security mechanism.
- TNS-01192: Missing SID_LIST_ value left of equation for SID description in LISTENER.ORA
-
Cause: SID description in LISTENER.ORA had an error in it.
- TNS-01193: Listener cannot operate with specified secure transport
-
Cause: Listener was configured with transport protocols which are either invalid or none of the secure transport protocols are present in listening addresses.
- TNS-01194: The listener command did not arrive in a secure transport
-
Cause: Most of the listener administrative commands are only intended to be issued in a secure transport, which are configured in secure_control_ parameter. If the parameter is set, then the listener accepts administrative requests only on those secure transports.
- TNS-01196: Unable to initialize GSM IPC channel
-
Cause: IPC API returned an error
- TNS-01197: Listener failed to create the end point
-
Cause: Internal error. Unable to get subnet mask for the ip address.
- TNS-01198: Listener failed to initialize valid node list
-
Cause: VNCR options are not properly initialized in listener.ora or OS API failed.
- TNS-01199: Warning! Different databases have registered the same service
-
Cause: Different databases have registered the same service.
- TNS-01200: The listener must be suid root
-
Cause: The ownership privileges of the TNSLSNR executable are incorrect.
- TNS-01201: Listener cannot find executable string for SID string
-
Cause: The executable for the Oracle dedicated server process cannot be found.
- TNS-01202: Missing the dba group (string) specified by DBA_GROUP in SID_DESC
-
Cause: The dba group specified is missing from /ETC/GROUP.
- TNS-01203: Missing the account (string) specified by DEFAULT_USER_ACCOUNT in SID_DESC
-
Cause: The unprivileged OS account is missing from /etc/passwd.
- TNS-01204: Unprivileged account (string) is in dba group (string)
-
Cause: The unprivileged account has DBA privileges. The unprivileged account specified by DEFAULT_USER_ACCOUNT in the SID_DESC in LISTENER.ORA is a member of the dba group specified by DBA_GROUP in SID_DESC. The unprivileged account cannot belong to the dba group because this would be a security violation with OPS$ logins.
- TNS-01250: Failed to get ADR Path for trace/alert directory
-
Cause: The diagnosability API to get the service path returned an error
- TNS-01251: Cannot set trace/log directory under ADR
-
Cause: ADR trace and log directories cannot be set by the user.
- TNS-01300: \nERROR at string\n
-
Cause: Listener logging message.
- TNS-01301: TNS error structure:
-
Cause: Listener logging message.
- TNS-01302: nr err code: number
-
Cause: Listener logging message.
- TNS-01303: ns main err code: number
-
Cause: Listener logging message.
- TNS-01304: ns secondary err code: number
-
Cause: Listener logging message.
- TNS-01305: nt main err code: number
-
Cause: Listener logging message.
- TNS-01306: nt secondary err code: number
-
Cause: Listener logging message.
- TNS-01307: nt OS err code: number
-
Cause: Listener logging message.
- TNS-01351: Listener failed to initialize log suppress node list
-
Cause: log suppress nodes options are not properly initialized in listener.ora.
- TNS-01400: Instance "string"\t\t has number handlers.
-
Cause: Control program status message.
- TNS-01401: Class: string
-
Cause: Control program status message.
- TNS-01402: TYPE: string
-
Cause: Control program status message.
- TNS-01403: Load: string
-
Cause: Control program status message.
- TNS-01404: Max Load: string
-
Cause: Control program status message.
- TNS-01405: Host: string
-
Cause: Control program status message.
- TNS-01406: ID: string
-
Cause: Control program status message.
- TNS-01407: Status: string Total handlers: string Relevant handlers: string
-
Cause: Control program status message.
- TNS-01408: Instance "string", status string, has string handler(s) for this service...
-
Cause: Control program status message.
- TNS-01409: Instance "string"
-
Cause: Control program status message.
- TNS-01410: Service "string"\t\thas number instances.
-
Cause: Control program status message.
- TNS-01411: Service "string" has number instance(s).
-
Cause: Control program status message.
- TNS-01412: Handler(s):
-
Cause: Control program status message.
- TNS-01413: "string" established:string refused:string current:string max:string state:string
-
Cause: Control program status message.
- TNS-01414: "string", state string, established string, refused string, current string, max string
-
Cause: Control program status message.
- TNS-01415: Listening Endpoints Summary...\n
-
Cause: Control program status message.
- TNS-01416: Process ID string\n
-
Cause: Control program status message.
- TNS-01417: "string" established:string refused:string state:string
-
Cause: Control program status message.
- TNS-01418: Proxy service "string" has number instance(s).
-
Cause: Control program status message.
- TNS-01419: Instance "string": string failure(s), status string...
-
Cause: Control program status message.
- TNS-01420: Presentation: string
-
Cause: Control program status message.
- TNS-01421: Session: string
-
Cause: Control program status message.
- TNS-01422: Default Service string\n
-
Cause: Control program status message.
- TNS-01423: ACL(s):
-
Cause: Control program status message.
- TNS-01424: string has string item(s)
-
Cause: Control program status message.
- TNS-01425: Services with Tenantkey Summary:\n
-
Cause: Control program status message.
- TNS-01426: Instance:string TenantKey:string
-
Cause: Control program status message.
- TNS-01441: Number of filtering rules currently in effect: number
-
Cause: Control program status message
- TNS-01442: No filtering rules currently in effect.
-
Cause: Control program status message
- TNS-02020: set displaymode RAW | COMPAT | NORMAL | VERBOSE: output mode for lsnrctl display\n
-
Cause: Control program usage message.
- TNS-02021: DIRECT_HANDOFF can be either ON or OFF.\n
-
Cause: Invalid value for the LSNRCTL direct_handoff parameter.
- TNS-02022: show rules: Show rules that are currently in effect\n
-
Cause: Control program usage message.
- TNS-02023: shutdown [<listener_name>] : shutdown all non-admin endpoints of listener\n
-
Cause: Control program usage message.
- TNS-02024: servacls [<listener_name>] : get the service ACLs information of the listener\n
-
Cause: Control program usage message.
- TNS-02025: tenantkey [<listener_name>] : get the service tenantkey information of the listener\n
-
Cause: Control program usage message.
- TNS-02401: gbname string too long, allowed number characters
-
Cause: gbname or domain name too long.
- TNS-02402: Bad CLBGNAMES parameter in tnsnames.ora
-
Cause: CLBGNAMES parameter in tnsnames.ora is bad.
- TNS-02403: Bad alias string or alias not present in tnsnames.ora
-
Cause: An alias was expected in tnsnames.ora but was not found or was not correctly formed.
- TNS-02404: Service string contains no local handlers
-
Cause: The listener found no suitable handler to redirect to.
- TNS-02405: GMS call failed, check GMS logs.
-
Cause: A GMS call made by the listener failed.
- TNS-02501: Authentication: no more roles
-
Cause: When a process attempted to retrieve a role from the authentication service, no more were available.
- TNS-02502: Authentication: unable to find initialization function
-
Cause: The native authentication service was unable to call the initialization function for the specified service because it does not exist.
- TNS-02503: Parameter retrieval failed
-
Cause: The native service layer was unable to retrieve a parameter from a configuration file.
- TNS-02504: Parameter count retrieval failed
-
Cause: The native service layer was unable to determine the number of arguments given for a configuration parameter.
- TNS-02505: Authentication: null context pointer provided
-
Cause: The function nau_ini() was passed a null pointer as the pointer to the context that it is supposed to use.
- TNS-02506: Authentication: no type string
-
Cause: An authentication context structure does not contain a string that describes the authentication service being used.
- TNS-02507: Encryption: algorithm not installed
-
Cause: After picking an algorithm, the server was unable to find an index for it in its table of algorithms. This should be impossible because the algorithm was chosen (indirectly) from that list.
- TNS-02508: Encryption: server negotiation response in error
-
Cause: The server's response in negotiation was in error.
- TNS-02509: Authentication: invalid process state
-
Cause: The state in which a process is running does not correspond to any of the values which are valid.
- TNS-02510: Invalid numeric data type
-
Cause: The type of a piece of numeric data that was received does not correspond to one of the valid values.
- TNS-02511: Invalid data type
-
Cause: The type of a piece of data that was received or to be transmitted did not correspond to any of the correct values.
- TNS-02512: Invalid status received
-
Cause: A process received a value as a status flag which was unknown.
- TNS-02513: Requested data type does not match retrieved type
-
Cause: A service requested data whose type does not match that of the segment which was sent from the other process.
- TNS-02514: Invalid packet received
-
Cause: A process received a data packet which was not meant for the native services layer.
- TNS-02515: Encryption/crypto-checksumming: unknown control type
-
Cause: An encryption or crypto-checksumming algorithm "control" function was called, but did not recognize the "type" argument it was given.
- TNS-02516: No data available
-
Cause: A native service attempted to retrieve data but no data was available to be received.
- TNS-02517: key smaller than requested size
-
Cause: The key returned by negotiation was smaller than the size requested by some service (either encryption or crypto-checksumming).
- TNS-02518: key negotiation error
-
Cause: An error occurred while the two sides of the connection were negotiating an encryption or crypto-checksumming key.
- TNS-02519: no appropriate key-negotiation parameters
-
Cause: No appopriate key-negotiation parameters are available for the key size requested either by encryption or by crypto- checksumming.
- TNS-02520: encryption/crypto-checksumming: no Diffie-Hellman seed
-
Cause: The "sqlnet.crypto_seed" parameter is missing from the SQLNET.ORA parameters file.
- TNS-02521: encryption/crypto-checksumming: Diffie-Hellman seed too small
-
Cause: The "sqlnet.crypto_seed" parameter in the SQLNET.ORA parameter file for Oracle Net is too small.
- TNS-02524: Authentication: privilege check failed
-
Cause: An error occurred when the authentication service attempted to verify that a user had a specific database privilege.
- TNS-02525: encryption/crypto-checksumming: self test failed
-
Cause: The encryption/crypto-checksumming service detected an error while running tests on the active encryption or checksumming algorithm.
- TNS-02526: server proxy type does not match client type
-
Cause: The authentication type selected by the server does not match that picked by the client.
- TNS-03501: OK
-
Cause: The operation succeeded.
- TNS-03502: Insufficient arguments. Usage: tnsping address [count]
-
Cause: Some required command-line arguments are missing.
- TNS-03503: Could not initialize NL
-
Cause: The network library could not be initialized.
- TNS-03504: Service name too long
-
Cause: The service name you are attempting to ping is too long.
- TNS-03505: Failed to resolve name
-
Cause: The service name you provided could not be found in TNSNAMES.ORA, an Oracle Names server, or a native naming service.
- TNS-03506: Failed to create address binding
-
Cause: The TNSPING utility found the requested address or service name, but received an internal error when trying to use it.
- TNS-03507: Failure looking for ADDRESS keyword
-
Cause: The TNS address did not contain an ADDRESS keyword.
- TNS-03508: Failed to create address string
-
Cause: The TNSPING utility received an internal error when generating an address.
- TNS-03509: OK (number msec)
-
Cause: The operation succeeded, in this amount of time.
- TNS-03510: Failed due to I/O error
-
Cause: An I/O operation failed, perhaps due to a resource failure or premature window termination.
- TNS-03511: Used parameter files:\nstring\n
-
Cause: Prints out the path of the parameter files(sqlnet.ora,tnsnames.ora) used in the process of resolving the NAME.
- TNS-03512: Used string adapter to resolve the alias\n
-
Cause: Prints out the name of the adapter which resolved the TNS alias.
- TNS-03513: Attempting to contact string\n
-
Cause: Attempting to contact a given TNS address.
- TNS-03601: Failed in route information collection
-
Cause: The route could either not connect, or encountered an unsupported version of Oracle Net.
- TNS-03602: Insufficient arguments. Usage: trcroute address
-
Cause: Some required command-line arguments are missing.
- TNS-03603: Encountered a node with a version eariler than SQL*Net 2.3
-
Cause: Versions of SQL*Net before 2.3 do not support trcroute.
- TNS-04001: string
-
Cause: CMCTL general message.
- TNS-04002: The command completed successfully.
-
Cause: Not applicable.
- TNS-04003: Syntax Error.
-
Cause: The command issued has a wrong syntax.
- TNS-04004: Unable to encrypt the supplied password.
-
Cause: The password that was supplied to the ADMINISTER command could not be encrypted.
- TNS-04005: Unable to resolve address for string.
-
Cause: The alias name supplied with the ADMINISTER command could not be resolved to an Oracle Connection Manager address.
- TNS-04006: Invalid password
-
Cause: The password given with the ADMINISTER command could not be verified by the Oracle Connection Manager instance.
- TNS-04007: Internal error number.
-
Cause: Not normally visible to the user.
- TNS-04008: string | string
-
Cause: String parameter value.
- TNS-04009: string | number
-
Cause: Integer parameter value.
- TNS-04010: Command cannot be issued before the ADMINISTER command.
-
Cause: A command was issued before administering the Oracle Connection Manager instance.
- TNS-04011: Oracle Connection Manager instance not yet started.
-
Cause: A command was issued when Oracle Connection Manager was not yet started or already shutdown.
- TNS-04012: Unable to start Oracle Connection Manager instance.
-
Cause: CMCTL was unable to start the Oracle Connection Manager instance. Some of the possible reasons include: cmadmin not present in ORACLE_HOME/bin, Invalid parameter in configuration repository, wrong parameter values, or log directory not present.
- TNS-04013: CMCTL timed out waiting for Oracle Connection Manager to start
-
Cause: Oracle Connection Manager internal registrations have not been completed.
- TNS-04014: Current instance string is already started
-
Cause: An ADMINISTER command was issued to administer an Oracle Connection Manager instance that is already started.
- TNS-04015: Current instance string is not yet started
-
Cause: An ADMINISTER command was issued to an instance that has not yet been started.
- TNS-04016: Connecting to string
-
Cause: CMCTL is connecting to the the specified Oracle Connection Manager address.
- TNS-04017: Please wait. Shutdown in progress.
-
Cause: A command which cannot be used while Oracle Connection Manager is shutting down was issued.
- TNS-04018: Instance already started
-
Cause: The STARTUP command was issued to an instance which was already started.
- TNS-04019: Starting Oracle Connection Manager instance string. Please wait...
-
Cause: The STARTUP command was issued for an Oracle Connection Manager instance. CMCTL is waiting for the instance to start.
- TNS-04020: CMCTL Version: number.number.number.number.number
-
Cause: None.
- TNS-04021: The SET command is unsuccessful for parameter string.
-
Cause: The value set for the parameter was out of range.
- TNS-04022: string parameter string set to string.
-
Cause: Parameter value was successfully set.
- TNS-04023: Command failed.
-
Cause: The command issued failed to complete successfully.
- TNS-04037: Connections refer to string.
-
Cause: The ADMINISTER command resolved to the address in the specified message string.
- TNS-04044: Specified gateways do not exist.
-
Cause: One or more specified gateway IDs do not exist.
- TNS-04045: Invalid specification of time
-
Cause: The time specified with the GT (greater than) option was invalid.
- TNS-04046: Invalid specification for source
-
Cause: The source specified with the FROM option was invalid.
- TNS-04047: Invalid specification for destination
-
Cause: The destination specified with the TO option was invalid.
- TNS-04048: Specified service does not exist.
-
Cause: The service specified with the FOR option did not exist.
- TNS-04049: Specified connections do not exist
-
Cause: One or more connection IDs do not exist.
- TNS-04050: Invalid specification for gateway ID.
-
Cause: The gateway ID specified is invalid.
- TNS-04063: Remote administration disabled in the Oracle Connection Manager instance.
-
Cause: CMCTL attempted to connect to a remote Oracle Connection Manager instance in which remote administration was disabled.
- TNS-04064: The number of CMCTL sessions exceeds MAX_CMCTL_SESSIONS.
-
Cause: The Oracle Connection Manager instance already has MAX_CMCTL_SESSIONS number of CMCTLs connected to it.
- TNS-04065: The number of remote CMCTL sessions exceeds (MAX_CMCTL_SESSIONS-1)
-
Cause: The Oracle Connection Manager instance already has (MAX_CMCTL_SESSIONS-1) number of remote CMCTL sessions connected to it.
- TNS-04066: The following log events can be enabled or disabled:
-
Cause: None
- TNS-04067: Number of connections: number.
-
Cause: Either no information qualifier (COUNT/DETAIL) was present in SHOW CONNECTIONS command, or, COUNT was used as the information qualifier.
- TNS-04068: Cannot start an Oracle Connection Manager instance remotely.
-
Cause: CMCTL was used to start Oracle Connection Manager instance in a remote host.
- TNS-04069: Sleeping for number seconds...
-
Cause: CMCTL is idle for specified seconds. This feature is only provided for testing purposes.
- TNS-04070: Cannot administer a remote Oracle Connection Manager instance which is not yet started.
-
Cause: An attempt was made to administer a remote Oracle Connection Manager instance which is not yet started.
- TNS-04071: Connections closed successfully. Number closed: number.
-
Cause: The specified connections were closed successfully.
- TNS-04072: Unable to suspend atleast one of the gateways.
-
Cause: CMCTL was unable to suspend one or more gateways. Possible reason could be suspending a gateway that was already suspended or suspending a gateway that was not present.
- TNS-04073: Passwords do not match.
-
Cause: The new password and its confirmation do not match
- TNS-04074: Invalid value for the parameter string.
-
Cause: The parameter value set using the SET command is invalid.
- TNS-04075: Cannot use ADMINISTER directly from the command line.
-
Cause: ADMINISTER can only be issued from the CMCTL> prompt.
- TNS-04076: Invalid specification for state.
-
Cause: The state specified with "in" option is invalid.
- TNS-04077: WARNING: No password set for the Oracle Connection Manager instance.
-
Cause: A connection to the Oracle Connection Manager instance was made with no password from the user.
- TNS-04078: Unable to resume atleast one of the gateways.
-
Cause: CMCTL was unable to resume one or more gateways. Possible reason could be resuming a gateway that was ready for connections, or resuming a gateway that was not present.
- TNS-04079: Cannot administer Oracle Connection Manager with no CMAN.ORA, and port = number.
-
Cause: CMAN.ORA is not present or address not configured in CMAN.ORA, and the net service name in the TNSNAMES.ORA contains a nondefault Oracle Connection Manager port.
- TNS-04080: Failed to reload
-
Cause: Oracle Connection Manager failed to reload the new configuration due to errors in the configuration file.
- TNS-04081: Event groups:
-
Cause: None
- TNS-04082: string event string set to string.
-
Cause: Event value was successfully set.
- TNS-04083: Failed to save password
-
Cause: Oracle Connection Manager failed to save the password in the configuration file.
- TNS-04084: WARNING: Non-reloadable parameters have retained their values.
-
Cause: Values of non-reloadable parameters were changed, or, one or more non-reloadable parameters having non-default values were added to the parameter file.
- TNS-04085: Password not changed since last save.
-
Cause: Password has not been changed since it was last saved.
- TNS-04086: Invalid value for the event string.
-
Cause: The event value set using the SET EVENT command is invalid.
- TNS-04087: Unable to shutdown atleast one of the gateways.
-
Cause: CMCTL was unable to shutdown one or more gateways. Possible reason could be shutting down a gateway that was not present.
- TNS-04088: Unable to close atleast one of the connections.
-
Cause: CMCTL was unable to close one or more connections. Possible reason could be closing a connection that was not present.
- TNS-04089: Alias name too long.
-
Cause: User entered an alias name that exceeded 64 characters.
- TNS-04090: string : number
-
Cause: Integer parameter value.
- TNS-04091: string : string
-
Cause: Integer parameter value.
- TNS-04096: Command not supported in Traffic Director mode.
-
Cause: This command is not supported by CMAN in Traffic Director mode.
- TNS-04140: Migration completed successfully.
-
Cause: CMMIGR has successfully completed the migration of the old CMAN.ORA file to the new format.
- TNS-04141: Unable to find CMAN.ORA file.
-
Cause: CMMIGR was not able to find CMAN.ORA file.
- TNS-04142: CMAN.ORA file has an invalid format.
-
Cause: CMMIGR was unable to recognize the format of CMAN.ORA file.
- TNS-04143: Unable to write the new CMAN.ORA file.
-
Cause: CMMIGR was unable to create the new CMAN.ORA file due to insufficient perimissions.
- TNS-04144: Nothing to migrate
-
Cause: CMMIGR did not find anything in the old CMAN.ORA file that has an equivalent in the new format.
- TNS-04191: invalid CMAN in Traffic Director mode configuration\n
-
Cause: An attempt was made to connect to CMAN in Traffic Director mode with invalid configuration.
- TNS-04201: Trace Assistant Usage ERROR: Missing File name\n
-
Cause: Trace file name argument is missing
- TNS-04202: Trace Assistant Usage ERROR: Not enough arguments \n
-
Cause: The file name and/or the options arguments are missing
- TNS-04203: Trace Assistant Usage ERROR: Invalid options \n
-
Cause: The options provided are not valid
- TNS-04204: Trace Assistant Internal ERROR: Couldn't Open trace file\n
-
Cause: The trace file name given doesn't exist or it is not accessible for this user.
- TNS-04205: Trace Assistant Internal ERROR: Memory\n
-
Cause: Possible memory problem
- TNS-04206: Trace Assistant Internal ERROR: Packet Type\n
-
Cause: The packet type read by trcAsst is not valid.
- TNS-04207: Trace Assistant Internal ERROR: Packet Length\n
-
Cause: The packet being decode is corrupted.
- TNS-04208: Trace Assistant Internal ERROR: Fatal\n
-
Cause: Fatal internal error
- TNS-04209: Trace Assistant Internal ERROR: Type Error \n
-
Cause: Internal type error,
- TNS-04210: Trace Assistant Internal ERROR: End of File\n
-
Cause: Reaching End of File to soon. Not able to decode trace file. Your trace file appears to be truncated.
- TNS-04211: Trace Assistant Internal ERROR: CORE\n
-
Cause: Internal System Error
- TNS-04212: Trace Assistant Internal ERROR: NACOM Type Error \n
-
Cause: Not able to decode Network Authentication information
- TNS-04231: Trace Assistant WARNING: Assuming Oracle trace format\n
-
Cause: This trace file may not be a Network trace file. The default format (Oracle Trace) will be assumed.
- TNS-04232: Trace Assistant WARNING: Not retrieving all rows \n
-
Cause: Trace Assitante won't retrieve all the rows data.
- TNS-04233: Trace Assistant WARNING: Going beyond Packet length\n
-
Cause: Trying to read beyond packet length. The trace file may be corrupted
- TNS-04234: Trace Assistant WARNING: won't decode TTC \n
-
Cause: Trace assistant does not have enough information to decode TTC data. This maybe an old trace file or from a platform that trace assistant does not understand.
- TNS-04235: Trace Assistant WARNING: Unknown TTC protocol\n
-
Cause: Trace Assistant has reached a point in which the TTC protocol can not be understood.
- TNS-12150: TNS:unable to send data
-
Cause: Unable to send data. Connection probably disconnected.
- TNS-12151: TNS:received bad packet type from network layer
-
Cause: Internal error.
- TNS-12152: TNS:unable to send break message
-
Cause: Unable to send break message. Connection probably disconnected.
- TNS-12153: TNS:not connected
-
Cause: Not currently connected to a remote host.
- TNS-12154: TNS:could not resolve the connect identifier specified
-
Cause: A connection to a database or other service was requested using a connect identifier, and the connect identifier specified could not be resolved into a connect descriptor using one of the naming methods configured. For example, if the type of connect identifier used was a net service name then the net service name could not be found in a naming method repository, or the repository could not be located or reached.
- TNS-12155: TNS:received bad datatype in NSWMARKER packet
-
Cause: Internal error during break handling.
- TNS-12156: TNS:tried to reset line from incorrect state
-
Cause: Internal error during break handling.
- TNS-12157: TNS:internal network communication error
-
Cause: Internal error during network communication.
- TNS-12158: TNS:could not initialize parameter subsystem
-
Cause: Unable to locate parameter file.
- TNS-12159: TNS:trace file not writeable
-
Cause: The trace file to be generated is not writeable by this user.
- TNS-12160: TNS:internal error: Bad error number
-
Cause: Corrupt error reporting subsystem.
- TNS-12161: TNS:internal error: partial data received
-
Cause: The connection may be terminated.
- TNS-12162: TNS:net service name is incorrectly specified
-
Cause: The connect descriptor corresponding to the net service name in TNSNAMES.ORA or in the directory server (Oracle Internet Directory) is incorrectly specified.
- TNS-12163: TNS:connect descriptor is too long
-
Cause: The connect descriptor corresponding to the net service name specified as the connect identifier is too long. The maximum length for a connect descriptor is 512 bytes and this limit has been exceeded.
- TNS-12164: TNS:Sqlnet.fdf file not present
-
Cause: The sqlnet.fdf file doesn't exist in $ORACLE_HOME/network/admin.
- TNS-12165: TNS:Trying to write trace file into swap space.
-
Cause: Oracle Trace doesn't allow writing trace information into your swap space.
- TNS-12166: TNS:Client can not connect to HO agent.
-
Cause: NVstring contained DESCRIPTION/HO.
- TNS-12168: TNS:Unable to contact LDAP Directory Server
-
Cause: Cannot contact LDAP directory server to get Oracle Net configuration.
- TNS-12169: TNS:Net service name given as connect identifier is too long
-
Cause: The net service name you are attempting to resolve is too long.
- TNS-12170: TNS:Connect timeout occurred
-
Cause: The server shut down because connection establishment or communication with a client failed to complete within the allotted time interval. This may be a result of network or system delays; or this may indicate that a malicious client is trying to cause a Denial of Service attack on the server.
- TNS-12171: TNS:could not resolve connect identifier: string
-
Cause: A connection to a database or other service was requested using a connect identifier, and the connect identifier specified could not be resolved into a connect descriptor using one of the naming methods configured. For example, if the type of connect identifier used was a net service name then the net service name could not be found in a naming method repository, or the repository could not be located or reached.
- TNS-12196: TNS:received an error from TNS
-
Cause: The navigation layer received an error from TNS.
- TNS-12197: TNS:keyword-value resolution error
-
Cause: The navigation layer received an error while trying to look up a value for a keyword.
- TNS-12198: TNS:could not find path to destination
-
Cause: Could not navigate a path through Interchanges to the destination. This error occurs if an invalid community is in the address string, or the address includes a protocol that is not available or the TNSNAV.ORA file does not have a correct CMANAGER address specified or the Interchange is down.
- TNS-12200: TNS:could not allocate memory
-
Cause: Out of memory on machine.
- TNS-12201: TNS:encountered too small a connection buffer
-
Cause: TNS connection buffer supplied by the application was too small to retrieve the data sent back.
- TNS-12202: TNS:internal navigation error
-
Cause: Internal navigation error.
- TNS-12203: TNS:unable to connect to destination
-
Cause: Invalid address specified or destination is not listening. This error can also occur because of underlying network or network transport problems.
- TNS-12204: TNS:received data refused from an application
-
Cause: The application using Connection Manager refused the connection at the listener.
- TNS-12205: TNS:could not get failed addresses
-
Cause: Internal navigation error.
- TNS-12206: TNS:received a TNS error during navigation
-
Cause: Internal navigation error because of an unexpected TNS error.
- TNS-12207: TNS:unable to perform navigation
-
Cause: Improperly configured navigation file TNSNAV.ORA.
- TNS-12208: TNS:could not find the TNSNAV.ORA file
-
Cause: Either the ORACLE environment is not set up correctly, or the TNSNAV.ORA file is not present.
- TNS-12209: TNS:encountered uninitialized global
-
Cause: Application calling navigation routine has not properly configured the global variables. There are no TNSNAV.ORA files available, or they are defective.
- TNS-12210: TNS:error in finding Navigator data
-
Cause: Application calling navigation routine has not properly configured the TNSNAV.ORA file.
- TNS-12211: TNS:needs PREFERRED_CMANAGERS entry in TNSNAV.ORA
-
Cause: TNSNAV.ORA does not have a PREFERRED_CMANAGERS defined.
- TNS-12212: TNS:incomplete PREFERRED_CMANAGERS binding in TNSNAV.ORA
-
Cause: The PREFERRED_CMANAGERS binding in the client's TNSNAV.ORA file does not have a CMANAGER_NAME specified.
- TNS-12213: TNS:incomplete PREFERRED_CMANAGERS binding in TNSNAV.ORA
-
Cause: The PREFERRED_CMANAGERS binding in the client's TNSNAV.ORA file does not have an ADDRESS specified.
- TNS-12214: TNS:missing local communities entry in TNSNAV.ORA
-
Cause: There is no LOCAL_COMMUNITIES entry in TNSNAV.ORA.
- TNS-12215: TNS:poorly formed PREFERRED_NAVIGATORS Addresses in TNSNAV.ORA
-
Cause: Address binding for PREFERRED_NAVIGATORS entry is improperly entered. entry.
- TNS-12216: TNS:poorly formed PREFERRED_CMANAGERS addresses in TNSNAV.ORA
-
Cause: Address binding for the PREFERRED_CMANAGERS entry in the client's TNSNAV.ORA file is improperly entered.
- TNS-12217: TNS:could not contact PREFERRED_CMANAGERS in TNSNAV.ORA
-
Cause: There is a syntax error in the PREFERRED_CMANAGERS entry, or addresses specified are wrong, or the intended Connection Managers are unavailable.
- TNS-12218: TNS:unacceptable network configuration data
-
Cause: Poorly formed network configuration data. For example, a PREFERRED_CMANAGERS entry may have an incorrect CMANAGER_NAME in the client's TNSNAV.ORA file. Or an Interchange downtime parameter (TIMEOUT_INTERVAL) on the Navigator may be set to zero in INTCHG.ORA.
- TNS-12219: TNS:missing community name from address in ADDRESS_LIST
-
Cause: This error occurs when an ADDRESS_LIST has some ADDRESSes in it that have no COMMUNITY component and others that do have a COMMUNITY component.
- TNS-12221: TNS:illegal ADDRESS parameters
-
Cause: An illegal set of protocol adapter parameters was specified. In some cases, this error is returned when a connection cannot be made to the protocol transport.
- TNS-12222: TNS:no support is available for the protocol indicated
-
Cause: The protocol requested in the ADDRESS portion of the connect descriptor identified through the net service name is not available. If the supplied ADDRESS is typographically correct then support for that protocol is not installed.
- TNS-12223: TNS:internal limit restriction exceeded
-
Cause: Too many TNS connections open simultaneously.
- TNS-12224: TNS:no listener
-
Cause: The connection request could not be completed because the listener is not running.
- TNS-12225: TNS:destination host unreachable
-
Cause: Contact can not be made with remote party.
- TNS-12226: TNS:operating system resource quota exceeded
-
Cause: The current user has exceeded the allotted resource assigned in the operating system.
- TNS-12227: TNS:syntax error
-
Cause: The supplied connect descriptor contains illegal syntax.
- TNS-12228: TNS:protocol adapter not loadable
-
Cause: On some platforms (such as Windows) protocol support is loaded at run-time. If the shared library (or DLL) for the protocol adapter is missing or one of its supporting libraries is missing then this error is returned.
- TNS-12229: TNS:Interchange has no more free connections
-
Cause: One or more Interchanges along the path to the destination desired has no more free connections available to be used for this call.
- TNS-12230: TNS:Severe Network error occurred in making this connection
-
Cause: This error is reported by an interchange which fails to make contact with the destination due to a physical network error while calling a destination.
- TNS-12231: TNS:No connection possible to destination
-
Cause: This error is reported by an interchange which fails to find a possible connection along the path to the destination.
- TNS-12232: TNS:No path available to destination
-
Cause: This error is reported by an interchange which fails to find a possible path to the destination.
- TNS-12233: TNS:Failure to accept a connection
-
Cause: This error is reported by an interchange which fails to accept a connection due to a redirect failure.
- TNS-12234: TNS:Redirect to destination
-
Cause: This error is reported by an interchange which determines that this interchange is not the right gateway and needs to redirect the connection to another gateway along the path to the destination.
- TNS-12235: TNS:Failure to redirect to destination
-
Cause: This error is reported by an interchange which fails to redirect a connection to another interchange along the path to the destination.
- TNS-12236: TNS:protocol support not loaded
-
Cause: On some platforms (such as Windows) protocol support is loaded at run-time. If the shared library (or DLL) for the protocol adapter has not been loaded, then this error is returned.
- TNS-12238: TNS: NT Operaion is aborted
-
Cause: The NT operation is aborted because it is interrupted by upper layer to cleanup the database session.
- TNS-12268: server uses weak encryption/crypto-checksumming version
-
Cause: Encryption/crypto-checksumming version used by server is not supported by client configuration.
- TNS-12269: client uses weak encryption/crypto-checksumming version
-
Cause: Encryption/crypto-checksumming version used by client is not supported by server configuration.
- TNS-12500: TNS:listener failed to start a dedicated server process
-
Cause: The process of starting up a dedicated server process failed. The executable could not be found or the environment may be set up incorrectly.
- TNS-12502: TNS:listener received no CONNECT_DATA from client
-
Cause: No CONNECT_DATA was passed to the listener.
- TNS-12503: TNS:listener received an invalid REGION from client
-
Cause: Invalid REGION was passed to the listener.
- TNS-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
-
Cause: The listener was not configured with a default service and SERVICE_NAME was missing from the CONNECT_DATA received by the listener.
- TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
-
Cause: The listener received a request to establish a connection to a database or other service. The connect descriptor received by the listener specified a SID for an instance (usually a database instance) that either has not yet dynamically registered with the listener or has not been statically configured for the listener. This may be a temporary condition such as after the listener has started, but before the database instance has registered with the listener.
- TNS-12506: TNS:listener rejected connection based on service ACL filtering
-
Cause: The client is not present in Service Access Control List.
- TNS-12508: TNS:listener could not resolve the COMMAND given
-
Cause: The COMMAND given to listener is not supported.
- TNS-12509: TNS:listener failed to redirect client to service handler
-
Cause: The dispatcher terminated unexpectedly
- TNS-12510: TNS:database temporarily lacks resources to handle the request
-
Cause: The dispatchers appear to be busy handling other requests.
- TNS-12511: TNS:service handler found but it is not accepting connections
-
Cause: The dispatchers notified the listener that they temporarily do not accept new connections.
- TNS-12513: TNS:service handler found but it has registered for a different protocol
-
Cause: The dispatchers registered for this service are connected to the listener by way of a different network protocol than that of the client.
- TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
-
Cause: The listener received a request to establish a connection to a database or other service. The connect descriptor received by the listener specified a service name for a service (usually a database service) that either has not yet dynamically registered with the listener or has not been statically configured for the listener. This may be a temporary condition such as after the listener has started, but before the database instance has registered with the listener.
- TNS-12515: TNS:listener could not find a handler for this presentation
-
Cause: None of the listener's known service handlers are registered as supporting the presentation protocol required by the connecting client.
- TNS-12516: TNS:listener could not find available handler with matching protocol stack
-
Cause: None of the known and available service handlers for the given SERVICE_NAME support the client's protocol stack: transport, session, and presentation protocols.
- TNS-12518: TNS:listener could not hand off client connection
-
Cause: The process of handing off a client connection to another process failed.
- TNS-12519: TNS:no appropriate service handler found
-
Cause: The listener could not find any available service handlers that are appropriate for the client connection.
- TNS-12520: TNS:listener could not find available handler for requested type of server
-
Cause: None of the known and available service handlers for requested type of server (dedicated or shared) are appropriate for the client connection.
- TNS-12521: TNS:listener does not currently know of instance requested in connect descriptor
-
Cause: The listener received a request to establish a connection to a database or other service. The connect descriptor received by the listener specified in addition to the service name an instance name for an instance (usually a database instance) that either has not yet dynamically registered with the listener or has not been statically configured for the listener. This may be a temporary condition such as after the listener has started, but before the database instance has registered with the listener.
- TNS-12522: TNS:listener could not find available instance with given INSTANCE_ROLE
-
Cause: There are not any available and appropriate database instances registered with the listener, that are part of the service identified by SERVICE_NAME given in the connect descriptor and that have the specified INSTANCE_ROLE (and INSTANCE_NAME, if specified).
- TNS-12523: TNS:listener could not find instance appropriate for the client connection
-
Cause: The listener could not find any available (database) instances, that are appropriate for the client connection.
- TNS-12524: TNS:listener could not resolve HANDLER_NAME given in connect descriptor
-
Cause: The HANDLER_NAME in the CONNECT_DATA was not found in the listener's tables for the specified SERVICE_NAME and INSTANCE_NAME.
- TNS-12525: TNS:listener has not received client's request in time allowed
-
Cause: The listener disconnected the client because the client failed to provide the necessary connect information within the allowed time interval. This may be a result of network or system delays; or this may indicate that a malicious client is trying to cause a Denial of Service attack on the listener.
- TNS-12526: TNS:listener: all appropriate instances are in restricted mode
-
Cause: Database instances supporting the service requested by the client were in restricted mode. The Listener does not allow connections to instances in restricted mode. This condition may be temporary, such as during periods when database administration is performed.
- TNS-12527: TNS:listener: all instances are in restricted mode or blocking new connections
-
Cause: All appropriate database instances supporting the service requested by the client reported that they either were in restricted mode or were blocking the new connections. The Listener does not allow connections to such instances. This condition may be temporary, such as at instance startup.
- TNS-12528: TNS:listener: all appropriate instances are blocking new connections
-
Cause: All instances supporting the service requested by the client reported that they were blocking the new connections. This condition may be temporary, such as at instance startup.
- TNS-12529: TNS:connect request rejected based on current filtering rules
-
Cause: Connection Manager and its listener were configured with filtering rules specifying that the connect request be rejected.
- TNS-12530: TNS:listener: rate limit reached
-
Cause: Listener has reached connection or service rate limit and hence rejected the connection.
- TNS-12531: TNS:cannot allocate memory
-
Cause: Sufficient memory could not be allocated to perform the desired activity.
- TNS-12532: TNS:invalid argument
-
Cause: An internal function received an invalid parameter.
- TNS-12533: TNS:illegal ADDRESS parameters
-
Cause: An illegal set of protocol adapter parameters was specified. In some cases, this error is returned when a connection cannot be made to the protocol transport.
- TNS-12534: TNS:operation not supported
-
Cause: An internal function received a request to perform an operation that is not supported (on this machine).
- TNS-12535: TNS:operation timed out
-
Cause: The requested operation could not be completed within the time out period.
- TNS-12536: TNS:operation would block
-
Cause: An internal operation did not commence because to do so would block the current process and the user has requested that operations be non-blocking.
- TNS-12537: TNS:connection closed
-
Cause: "End of file" condition has been reached; partner has disconnected.
- TNS-12538: TNS:no such protocol adapter
-
Cause: The protocol adapter requested (by way of the "(PROTOCOL=..)" keyword-value pair in a TNS address) is unknown. If the supplied address is typographically correct then the protocol adapter is not installed.
- TNS-12539: TNS:buffer over- or under-flow
-
Cause: Buffer too small for incoming data or too large for outgoing data.
- TNS-12540: TNS:internal limit restriction exceeded
-
Cause: Too many TNS connections open simultaneously.
- TNS-12541: TNS:no listener
-
Cause: The connection request could not be completed because the listener is not running.
- TNS-12542: TNS:address already in use
-
Cause: Specified listener address is already being used.
- TNS-12543: TNS:destination host unreachable
-
Cause: Contact can not be made with remote party.
- TNS-12544: TNS:contexts have different wait/test functions
-
Cause: Two protocol adapters have conflicting wait/test functions.
- TNS-12545: Connect failed because target host or object does not exist
-
Cause: The address specified is not valid, or the program being connected to does not exist.
- TNS-12546: TNS:permission denied
-
Cause: User has insufficient privileges to perform the requested operation.
- TNS-12547: TNS:lost contact
-
Cause: Partner has unexpectedly gone away, usually during process startup.
- TNS-12548: TNS:incomplete read or write
-
Cause: A data send or receive failed.
- TNS-12549: TNS:operating system resource quota exceeded
-
Cause: The current user has exceeded the allotted resource assigned in the operating system.
- TNS-12550: TNS:syntax error
-
Cause: The supplied connect descriptor contains illegal syntax.
- TNS-12551: TNS:missing keyword
-
Cause: The supplied connect descriptor is missing one or more TNS keywords.
- TNS-12552: TNS:operation was interrupted
-
Cause: An internal operation was interrupted and could not complete.
- TNS-12554: TNS:current operation is still in progress
-
Cause: An internal operation is still in progress.
- TNS-12555: TNS:permission denied
-
Cause: User has insufficient privileges to perform the requested operation.
- TNS-12556: TNS:no caller
-
Cause: TNS detected an incoming connect request but there was no caller.
- TNS-12557: TNS:protocol adapter not loadable
-
Cause: On some platforms (such as OS/2) protocol adapters are loaded at run-time. If the shared library (or DLL) for the protocol adapter is missing or one of its supporting libraries is missing then this error is returned.
- TNS-12558: TNS:protocol adapter not loaded
-
Cause: On some platforms (such as OS/2) protocol adapters are loaded at run-time. If the shared library (or DLL) for the protocol adapter has not been loaded, then this error is returned.
- TNS-12560: TNS:protocol adapter error
-
Cause: A generic protocol adapter error occurred.
- TNS-12561: TNS:unknown error
-
Cause: A generic protocol error occurred.
- TNS-12562: TNS:bad global handle
-
Cause: Internal error - bad 'gbh' argument passed to TNS from caller. System may have been linked with old libraries.
- TNS-12563: TNS:operation was aborted
-
Cause: NT operation was interrupted by the uppper layer.
- TNS-12564: TNS:connection refused
-
Cause: The connect request was denied by the remote user (or TNS software).
- TNS-12566: TNS:protocol error
-
Cause: An unexpected TNS protocol error has occurred.
- TNS-12569: TNS:packet checksum failure
-
Cause: The data received is not the same as the data sent.
- TNS-12570: TNS:packet reader failure
-
Cause: An error occurred during a data receive.
- TNS-12571: TNS:packet writer failure
-
Cause: An error occurred during a data send.
- TNS-12574: TNS:Application generated error
-
Cause: This error was generated by peer application. Please see secondary errors for the actual cause.
- TNS-12575: TNS:dhctx busy
-
Cause: The handoff over a dhctx failed as dhctx was already busy with an ongoing handoff.
- TNS-12576: TNS:handoff not supported for this session
-
Cause: Handoff of a established session was attempted which either had tcps as its transport or NA options were enabled for this session.
- TNS-12578: TNS:wallet open failed
-
Cause: An error was encountered while trying to open the specified wallet.
- TNS-12579: TNS:transport connection failed
-
Cause: An error was encountered while trying to create transport connection.
- TNS-12582: TNS:invalid operation
-
Cause: An internal function received an invalid request.
- TNS-12583: TNS:no reader
-
Cause: A send operation has been requested but partner has already disconnected.
- TNS-12585: TNS:data truncation
-
Cause: A receive operation has completed with insufficient data to satisfy the user's request.
- TNS-12589: TNS:connection not bequeathable
-
Cause: An attempt to hand-off a connection from one process to another has failed because the protocol provider does not support it.
- TNS-12590: TNS:no I/O buffer
-
Cause: An attempt to perform an I/O operation failed because no buffer was available.
- TNS-12591: TNS:event signal failure
-
Cause: The TNS software is unable to signal an event occurrence.
- TNS-12592: TNS:bad packet
-
Cause: An ill-formed packet has been detected by the TNS software.
- TNS-12593: TNS:no registered connection
-
Cause: An attempt to solicit network event activity has failed because no connections are registered for event notification.
- TNS-12595: TNS:no confirmation
-
Cause: TNS is unable to get requested confirmation acknowledgment from remote partner.
- TNS-12596: TNS:internal inconsistency
-
Cause: TNS has detected an internal inconsistency.
- TNS-12597: TNS:connect descriptor already in use
-
Cause: Internal error - illegal use of connect descriptor.
- TNS-12598: TNS:banner registration failed
-
Cause: The registration of a product banner with the Oracle server failed.
- TNS-12599: TNS:cryptographic checksum mismatch
-
Cause: The data received is not the same as the data sent.
- TNS-12600: TNS: string open failed
-
Cause: The creation of a string in ORACLE NLS format failed.
- TNS-12601: TNS:information flags check failed
-
Cause: The TNS information flags set by the process prior to connection negotiation were not present after the negotiation was finished.
- TNS-12602: TNS: Connection Pooling limit reached
-
Cause: The operation failed because maximum active current connections has been reached. It may not be a real error when the Connection Pooling feature is enabled. It is possible that the application later reissues the operation and successfully grabs the connection pool slot and proceeds.
- TNS-12606: TNS: Application timeout occurred
-
Cause: A network session did not reach an application-defined stage within the allowed time interval.
- TNS-12607: TNS: Connect timeout occurred
-
Cause: A network session did not reach a predefined connect stage within the allowed time interval.
- TNS-12608: TNS: Send timeout occurred
-
Cause: The send or write operation did not complete within the allowed time interval.
- TNS-12609: TNS: Receive timeout occurred
-
Cause: The receive or read operation did not complete within the allowed time interval.
- TNS-12611: TNS:operation is not portable
-
Cause: Attempted operation is not portable.
- TNS-12612: TNS:connection is busy
-
Cause: Attempted operation failed because it conflicts with an ongoing action or status of the connection.
- TNS-12615: TNS:preempt error
-
Cause: A request to service an event failed because no event notification has yet been posted.
- TNS-12616: TNS:no event signals
-
Cause: The operation failed because the type of data specified is unknown.
- TNS-12618: TNS:versions are incompatible
-
Cause: The two machines are running incompatible versions of TNS.
- TNS-12619: TNS:unable to grant requested service
-
Cause: The connect request failed because requested service could not be provided by the local TNS software.
- TNS-12620: TNS:requested characteristic not available
-
Cause: The connect request failed because a requested transport characteristic could not be supported by the remote TNS software.
- TNS-12622: TNS:event notifications are not homogeneous
-
Cause: An attempt to register a connection for event notification failed because the event notification type conflicts with existing registrations.
- TNS-12623: TNS:operation is illegal in this state
-
Cause: Connection is half-duplex and a full-duplex operation was attempted.
- TNS-12624: TNS:connection is already registered
-
Cause: An attempt to register a connection for event notification failed because the connection is already registered.
- TNS-12625: TNS:missing argument
-
Cause: An operation failed because an argument was missing"
- TNS-12626: TNS:bad event type
-
Cause: An attempt to register a connection for event notification failed because the event type is unknown.
- TNS-12628: TNS:no event callbacks
-
Cause: An attempt to register a connection for event notification failed because asynchronous callbacks are not available.
- TNS-12629: TNS:no event test
-
Cause: An attempt to register a connection for event notification failed because the ability to test for events is not available.
- TNS-12630: Native service operation not supported
-
Cause: An operation requested by a user is not supported by the native services component.
- TNS-12631: Username retrieval failed
-
Cause: The authentication service failed to retrieve the name of a user.
- TNS-12632: Role fetch failed
-
Cause: The authentication service failed to retrieve one of the user's roles.
- TNS-12633: No shared authentication services
-
Cause: The list of authentication services specified by the user does not match those supported by the process.
- TNS-12634: Memory allocation failed
-
Cause: Process was unable to allocate memory.
- TNS-12635: No authentication adapters available
-
Cause: The executable was not linked with any authentication service adapters but the sqlnet.ora parameter that determines whether or not authentication is required was set to true.
- TNS-12636: Packet send failed
-
Cause: A process was unable to send a packet to another process. Possible causes are: 1. The other process was terminated. 2. The machine on which the other process is running went down. 3. Some other communications error occurred.
- TNS-12637: Packet receive failed
-
Cause: A process was unable to receive a packet from another process. Possible causes are: 1. The other process was terminated. 2. The machine on which the other process is running went down. 3. Some other communications error occurred.
- TNS-12638: Credential retrieval failed
-
Cause: The authentication service failed to retrieve the credentials of a user.
- TNS-12639: Authentication service negotiation failed
-
Cause: No match was found between the types of authentication services that the client supports and those that the server is using.
- TNS-12640: Authentication adapter initialization failed
-
Cause: The function specified in the authentication table entry for the service failed.
- TNS-12641: Authentication service failed to initialize
-
Cause: The authentication service failed during initialization.
- TNS-12642: No session key
-
Cause: A process has no session key associated with it because the authentication service being used does not use one.
- TNS-12643: Client received internal error from server
-
Cause: The client process received an error from the server that indicated that an internal Oracle Net native services error had occurred.
- TNS-12645: Parameter does not exist.
-
Cause: A sqlnet.ora parameter from which a value was needed does not exist.
- TNS-12646: Invalid value specified for boolean parameter
-
Cause: The value specified for a parameter was set to a value other than true/false or on/off.
- TNS-12647: Authentication required
-
Cause: The parameter that controls whether authentication is required was set to true, but the executable does not have an authentication service linked in.
- TNS-12648: Encryption or data integrity algorithm list empty
-
Cause: A list-of-algorithms parameter was empty, e.g. "()".
- TNS-12649: Unknown encryption or data integrity algorithm
-
Cause: A list-of-algorithms parameter included an algorithm name that was not recognized.
- TNS-12650: No common encryption or data integrity algorithm
-
Cause: The client and server have no algorithm in common for either encryption or data integrity or both.
- TNS-12651: Encryption or data integrity algorithm unacceptable
-
Cause: The algorithm the server chose to use for encryption or data integrity was not one of the choices acceptable to the client. This is either the result of an internal error, of a network data transmission error, or of deliberate tampering with the transmitted data.
- TNS-12652: String truncated
-
Cause: Not enough memory was allocated for a string so it had to be truncated
- TNS-12653: Authentication control function failed
-
Cause: The control function utilized by the authentication service driver failed.
- TNS-12654: Authentication conversion failed
-
Cause: The authentication service was unable to convert the credentials of a user from the format specific to the format into the ORACLE format.
- TNS-12655: Password check failed
-
Cause: The authentication service being used was unable to verify the provided password.
- TNS-12656: Cryptographic checksum mismatch
-
Cause: The cryptographic checksum received with a packet of incoming data didn't match the checksum computed by the receiving end. This indicates that the packet was tampered with or otherwise corrupted in transit.
- TNS-12657: No algorithms installed
-
Cause: The near side of the connection required the use of a service (either encryption or checksumming) when no algorithms for that service were installed.
- TNS-12658: ANO service required but TNS version is incompatible
-
Cause: A client process that is running an earlier version of TNS attempted to connect but the connection failed because the server process required that an ANO service (authentication, encryption, etc.) be used.
- TNS-12659: Error received from other process
-
Cause: An error was received by one or more services from the process on the other side of the connection.
- TNS-12660: Encryption or crypto-checksumming parameters incompatible
-
Cause: One side of the connection specified "REQUIRED" for encryption or crypto-checksumming, while the other side specified "REJECTED".
- TNS-12661: Protocol authentication to be used
-
Cause: The authentication service has determined that the Oracle Net transport protocol in use is to be utilized to authenticate a user's identity.
- TNS-12662: proxy ticket retrieval failed
-
Cause: The authentication adapter used by Oracle Net failed to retrieve the credentials needed to authenticate a database link.
- TNS-12663: Services required by client not available on the server
-
Cause: Service(s) that was (were) required by the client process were not available on the server process.
- TNS-12664: Services required by server not available on the client
-
Cause: Service(s) that was (were) required by the server process were not available on the client process.
- TNS-12665: NLS string open failed
-
Cause: A native service was unable to make a string available for use by the National Language Support component.
- TNS-12666: Dedicated server: outbound transport protocol different from inbound
-
Cause: The protocol specified for an externally-identified outbound connection from a dedicated server (database link) was not the same as that used for the inbound connection. It is not possible for Oracle Net to authenticate a proxy connection that uses a protocol that is different from that which was used for the connection to the dedicated server.
- TNS-12667: Shared server: outbound transport protocol different from inbound
-
Cause: The protocol specified for an externally-identified outbound connection from a shared server (database link) was not the same as as that used for the inbound connection. It is not possible for Oracle Net to authenticate a proxy connection that uses a protocol that is different from that which was used for the connection to the shared server.
- TNS-12668: Dedicated server: outbound protocol does not support proxies
-
Cause: The protocol specified to perform an externally-identified proxy connection (database link) from a dedicated server does not support proxy connections.
- TNS-12669: Shared server: outbound protocol does not support proxies
-
Cause: The protocol specified to perform an externally-identified proxy connection (database link) from a shared server does not support proxy connections.
- TNS-12670: Incorrect role password
-
Cause: A password supplied for a role could not be validated by the authentication service.
- TNS-12671: Shared server: adapter failed to save context
-
Cause: The adapter for the authentication service failed when it tried to save the data needed for proxy connections (database links) through the shared server.
- TNS-12672: Database logon failure
-
Cause: The authentication service adapter in use encountered an error it attempted to validate the logon attempt of a user.
- TNS-12673: Dedicated server: context not saved
-
Cause: A connection was marked as being a proxy connection (database link) from a dedicated server but no inbound context was present.
- TNS-12674: Shared server: proxy context not saved
-
Cause: A connection was marked as being a proxy connection (database link) from a shared server but no inbound context was present.
- TNS-12675: External user name not available yet
-
Cause: The authentication service in use was not able to return the external name of a user of the ORACLE server because it is not available to the service yet.
- TNS-12676: Server received internal error from client
-
Cause: The server process received an error from the client which indicated that an internal Oracle Net native services error had occurred.
- TNS-12677: Authentication service not supported by database link
-
Cause: The authentication service used by the proxy process (database link) was unable to find the adapter being used by the client in its list of authentication mechanisms.
- TNS-12678: Authentication disabled but required
-
Cause: The configuration parameters that control whether authentication is disabled or required were both set to TRUE.
- TNS-12679: Native services disabled by other process but required
-
Cause: The remote process has disabled native services but the local process requires them.
- TNS-12680: Native services disabled but required
-
Cause: The process has disabled native services but at least one service is required.
- TNS-12681: Login failed: the SecurID card does not have a pincode yet
-
Cause: The SecurID card that is used to logon to Oracle, does not have a pincode assigned to it.
- TNS-12682: Login failed: the SecurID card is in next PRN mode
-
Cause: The SecurID card and the SecurID server are out of sync and the server requires the next cardcode to resynchronize the card.
- TNS-12683: encryption/crypto-checksumming: no Diffie-Hellman seed
-
Cause: The "sqlnet.crypto_seed" parameter is missing from the SQLNET.ORA parameters file.
- TNS-12684: unsupported encryption/crypto-checksumming version
-
Cause: Encryption/crypto-checksumming version used by remote is not supported by this configuration.
- TNS-12685: Native service required remotely but disabled locally
-
Cause: A native service is required by the remote process but native services have been disabled locally.
- TNS-12686: Invalid command specified for a service
-
Cause: An operation which does not exist was specified for a native service.
- TNS-12687: Credentials expired.
-
Cause: The credentials that are used to authenticate the user for the requested connection have expired.
- TNS-12688: Login failed: the SecurID server rejected the new pincode
-
Cause: There are a number of reasons why the SecurID server would refuse a pincode: - The user might not have permission to make up his own pincode. - The pincode was either too short or too long. Valid pincodes consist of minimal four, but no more than eight characters. - The pincode contains any non alphanumeric characters.
- TNS-12689: Server Authentication required, but not supported
-
Cause: Server Authentication is required for this connection, but not supported by both sides of the connection.
- TNS-12690: Server Authentication failed, login cancelled
-
Cause: Server Authentication is required, but the server's credentials were found invalid by the client.
- TNS-12691: TTC RPC (string) not supported by Oracle Connection Manager in Traffic Director mode
-
Cause: Oracle Connection Manager in Traffic Director mode does not support the specified Two-Task Common (TTC) Remote Procedure Call(RPC).
- TNS-12692: functionality (string) not supported by Oracle Connection Manager in Traffic Director mode
-
Cause: Oracle Connection Manager in Traffic Director mode does not support the specified functionality.
- TNS-12693: PRCP is not configured in Oracle Connection Manager in Traffic Director mode
-
Cause: The client was attempting to connect using Proxy Resident Connection Pool (PRCP) while PRCP is not configured in Oracle Connection Manager in Traffic Director mode.
- TNS-12694: non-PRCP connection requested when PRCP is configured in Oracle Connection Manager in Traffic Director mode
-
Cause: The client was attempting a non Proxy Resident Connection Pool (PRCP) connection while PRCP was configured in Oracle Connection Manager in Traffic Director mode.
- TNS-12695: This statement cannot be executed with Oracle Connection Manager in Traffic Director mode with PRCP enabled
-
Cause: The client did not send enough information to execute the statement with Oracle Connection Manager in Traffic Director mode with Proxy Resident Connection Pooling (PRCP) enabled.
- TNS-12696: Double Encryption Turned On, login disallowed
-
Cause: The user is using a Secure Protocol Adapter that has Encryption turned ON as well as ANO Encryption.
- TNS-12697: PRCP: Internal error\n
-
Cause: Invalid PRCP state detected while collecting statistics
- TNS-12699: Native service internal error
-
Cause: An internal error occurred in the native services component.