3 Administering Database Instances and Cluster Databases
This chapter describes how to administer Oracle Real Application Clusters (Oracle RAC) databases and database instances.
Note:
A multitenant container database is the only supported architecture in Oracle Database 21c. While the documentation is being revised, legacy terminology may persist. In most cases, "database" and "non-CDB" refer to a CDB or PDB, depending on context. In some contexts, such as upgrades, "non-CDB" refers to a non-CDB from a previous release.
- Overview of Oracle RAC Database Administration
Oracle RAC database administration requires certain privileges and administrative tasks can vary depending on the deployment model. - Tools for Administering Oracle RAC
The tools most commonly used to managed Oracle Real Application Clusters (Oracle RAC) databases and instances are the SRVCTL utility, Oracle Enterprise Manager, and SQL*Plus. - Starting and Stopping Instances and Oracle RAC Databases
You can start and stop instances with Oracle Enterprise Manager, SQL*Plus, or SRVCTL. - Starting and Stopping PDBs in Oracle RAC
You can use SRVCTL commands to manage PDBs. - Pluggable Database Rank
The PDB-rank
parameter defines relative importance of the PDBs, which are created specifying cardinality, in a database with theRANK
management policy. - Pluggable Database Placement
Configure PDBs to either run explicitly in the specified CDB instances or run dynamically in any CDB or a subset of CDBs in the cluster. - Example of Creating a Pluggable Database with Cardinality and Rank
You can use these examples to see how to create an Oracle database and create a pluggable database, specifying cardinality, in the Oracle database. - Reducing Downtime During Database and Instance Outages
Outages can be either planned (maintenance) or unplanned. You can use features to help minimize both types of outages. - Verifying That Instances are Running
To verify that a database instance is available, use Oracle Enterprise Manager, SRVCTL, or SQL*Plus. - Terminating Sessions On a Specific Cluster Instance
You can use theALTER SYSTEM KILL SESSION
statement to terminate a session on a specific instance. - Overview of Initialization Parameter Files in Oracle RAC
The initialization parameters for an Oracle RAC database are stored in a SPFILE. - Initialization Parameter Use in Oracle RAC
By default, most parameters are set to a default value and this value is the same across all instances. - Converting an Administrator-Managed Database to a Policy-Managed Database
You can convert an administrator-managed database to a policy-managed database. - Managing Memory Pressure for Database Servers
Memory Guard detects memory pressure on a server in real time and redirects new sessions to other servers to prevent using all available memory on the stressed server. - Quiescing Oracle RAC Databases
The procedure for quiescing Oracle RAC databases is identical to quiescing a noncluster database. - Administering Multiple Cluster Interconnects on Linux and UNIX Platforms
In Oracle RAC environments that run on Linux and UNIX platforms, you can use theCLUSTER_INTERCONNECTS
initialization parameter to specify an alternative interconnect to the one Oracle Clusterware is using for the private network. - Customizing How Oracle Clusterware Manages Oracle RAC Databases
Use these examples to minimize Oracle Clusterware control over Oracle RAC databases, which you may need to do during upgrades. - Advanced Oracle Enterprise Manager Administration
You can install, configure, and monitor an Oracle Real Application Clusters (Oracle RAC) database from a single location using Oracle Enterprise Manager Cloud Control.
See Also:
The Oracle Enterprise Manager Cloud Control online help for more information about Oracle Enterprise Manager Cloud Control.Overview of Oracle RAC Database Administration
Oracle RAC database administration requires certain privileges and administrative tasks can vary depending on the deployment model.
Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.
- Required Privileges for Oracle RAC Database Administration
Use the SYSRAC administrative privilege to manage Oracle RAC databases. - Oracle RAC Database Deployment Models
Starting with Oracle Database 21c, there is a single, merged management style for Oracle RAC databases. - Using the Same Cluster for Administrator-Managed and Policy-Managed Databases
If you want to create an administrator-managed database on a cluster that already hosts policy-managed databases, then you must carefully select the nodes for the administrator-managed database.
Parent topic: Administering Database Instances and Cluster Databases
Required Privileges for Oracle RAC Database Administration
Use the SYSRAC administrative privilege to manage Oracle RAC databases.
To increase security and further separate administrative duties, Oracle RAC database administrators manage Oracle RAC databases with the SYSRAC administrative privilege.
The SYSRAC administrative privilege is the default mode of connecting to the database by the Oracle Clusterware agent on behalf of Oracle RAC utilities, such as SRVCTL.
Related Topics
Parent topic: Overview of Oracle RAC Database Administration
Oracle RAC Database Deployment Models
Starting with Oracle Database 21c, there is a single, merged management style for Oracle RAC databases.
Note:
Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.Prior to Oracle Database 21c, Oracle RAC databases support two different management styles and deployment models: administrator-managed deployment and policy-managed deployment.
Administrator-managed deployment requires that you
statically configure each database instance to run on a specific node in the cluster.
This deployment also requires that you configure database services to run on specific
instances that belong to a particular database using the preferred
and
available
designation.
Policy-managed deployment is based on server pools. In this deployment, database services run within a server pool as singleton or uniform across all of the servers in the server pool. Databases are deployed in one or more server pools and the size of the server pools determine the number of database instances in the deployment.
Starting with Oracle Database 21c, the two management styles are merged into a single deployment model that combines the best features of each model. The administrator-managed database deployment style now has additional capabilities that were previously available only in policy-managed databases. These enhancements result in a new, converged deployment style. To use the merged database management style, you must have a Container Database (CDB) with at least one Pluggable Database (PDB).
You manage the merged database deployment model using the same commands and
utilities (such as SRVCTL, Oracle DBCA, or Oracle Enterprise Manager) as before. All
commands and utilities, except for the policy-management specific commands such as
srvpool
commands, maintain backward compatibility to support the
management of Oracle databases prior to Oracle Database 21c.
The merged database management style simplifies management of dynamic systems. The clusters and databases can expand or shrink as requirements change. The Oracle home software must be installed on every node in the cluster.
The PDBs in the cluster database are available on all nodes, or a subset of
the nodes, based on the cardinality setting for the PDB. The cardinality of a PDB
governs the number of nodes where a PDB can run at the same time. If you use a number
for cardinality instead of ALL
, then the instances in which the PDBs
are opened depend on the resources available to each instance.
A database instance is started on every server in the cluster that hosts a PDB. If you are using Oracle Automatic Storage Management (Oracle ASM) with Oracle Managed Files for your database storage, then, when an instance starts and there is no redo thread available, Oracle RAC automatically enables one and creates the required redo log files and undo tablespace.
Clients can connect to a PDB using the same SCAN-based connect string irrespective of which servers the PDBs are running on at the time.
Related Topics
Parent topic: Overview of Oracle RAC Database Administration
Using the Same Cluster for Administrator-Managed and Policy-Managed Databases
If you want to create an administrator-managed database on a cluster that already hosts policy-managed databases, then you must carefully select the nodes for the administrator-managed database.
Note:
Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.Careful instance placement when using both administrator-managed databases and policy-managed databases is needed because the nodes that you select for an administrator-managed database that are in policy-managed server pools will be moved into the Generic server pool as part of this process.
If you select nodes that already run other policy-managed database instances, then DBCA prompts you with a message that lists the instances and services that will be shut down when DBCA creates the administrator-managed database. If you select the Yes button on the dialog box when DBCA asks "Do you want to continue?", then your policy-managed database instances and services will be shut down because of the administrator-managed database creation process.
Note:
Your policy-managed database instances and services are also impacted if you use thesrvctl add instance
command, which returns a similar error message indicating that the databases would be shut down. If you also use the force option (-f
) with the srvctl add instance
command, then this is the same as choosing Yes on the DBCA dialog. Using the -f
option shuts down any policy-managed databases that are running on the node before moving the node into the Generic server pool.
Parent topic: Overview of Oracle RAC Database Administration
Tools for Administering Oracle RAC
The tools most commonly used to managed Oracle Real Application Clusters (Oracle RAC) databases and instances are the SRVCTL utility, Oracle Enterprise Manager, and SQL*Plus.
In many cases, you use these tools the same way to manage Oracle RAC environments as you would use them manage noncluster Oracle databases:
- Administering Oracle RAC with SRVCTL
The Server Control Utility (SRVCTL) is a command-line interface that you can use to manage Oracle Databases in a centralized manner. - Administering Oracle RAC with Oracle Enterprise Manager
Oracle Enterprise Manager provides a central point of control for the Oracle RAC environment, allowing you to perform administrative tasks simultaneously on multiple cluster databases. - Administering Oracle RAC with SQL*Plus
Unlike SRVCTL or Oracle Enterprise Manager, SQL*Plus is an instance-oriented management tool. - How SQL*Plus Commands Affect Instances
You can use SQL*Plus to start and stop instances in the Oracle RAC database.
Parent topic: Administering Database Instances and Cluster Databases
Administering Oracle RAC with SRVCTL
The Server Control Utility (SRVCTL) is a command-line interface that you can use to manage Oracle Databases in a centralized manner.
Oracle made centralized, SRVCTL-based database management available in Oracle Database 11g release 2 (11.2) for single-instance Oracle Databases, using Oracle ASM in the Oracle Grid Infrastructure, for both a noncluster environment and Oracle RAC databases, based on Oracle Grid Infrastructure for a cluster. This enables homogeneous management of all Oracle Database types using SRVCTL. You can use SRVCTL to start and stop the database and instances, and to delete or move instances and services. You can also use SRVCTL to add services and manage configuration information, in addition to other resources in the cluster.
When you use SRVCTL to perform configuration operations on your cluster, SRVCTL stores configuration data in the Oracle Cluster Registry (OCR) in a cluster or Oracle Local Registry (OLR) in Oracle Restart environments. SRVCTL performs other operations, such as starting and stopping instances, by configuring and managing Oracle Clusterware resources, which define agents that perform database startup and shutdown operations using Oracle Call Interface APIs.
Note:
If you require your database (or database instance) to start using certain environment variables, then use the srvctl setenv
command to set those variables for the database profile that is maintained for the database using SRVCTL. You do not need to set the ORACLE_HOME
and ORACLE_SID
environment variables, because SRVCTL maintains and sets those parameters, automatically.
Related Topics
Parent topic: Tools for Administering Oracle RAC
Administering Oracle RAC with Oracle Enterprise Manager
Oracle Enterprise Manager provides a central point of control for the Oracle RAC environment, allowing you to perform administrative tasks simultaneously on multiple cluster databases.
Based on the Oracle Enterprise Manager Cloud Control (Grid Control in Oracle Enterprise Manager 11g) graphical user interface (GUI), you can manage both non-clustered and Oracle RAC environments.
In Oracle Enterprise Manager, Oracle RAC-specific administrative tasks generally focus on two levels: tasks that affect an entire cluster database and tasks that affect specific instances. For example, you can use Oracle Enterprise Manager to start, stop, and monitor databases, cluster database instances, and their listeners, and to schedule jobs or set up alert thresholds for metrics. Or you can perform instance-specific commands such as setting parameters or creating resource plans. You can also use Oracle Enterprise Manager to manage schemas, security, and cluster database storage features.
Related Topics
Parent topic: Tools for Administering Oracle RAC
Administering Oracle RAC with SQL*Plus
Unlike SRVCTL or Oracle Enterprise Manager, SQL*Plus is an instance-oriented management tool.
SQL*Plus commands operate on the current instance. The current instance can be either the local default instance on which you initiated your SQL*Plus session, or it can be a remote instance to which you connect with Oracle Net Services. For an Oracle RAC environment that runs multiple instances on one database at the same time, this implies that you need to consider the extent to which SQL*Plus can operate on this instance. Due to those restrictions, you should not use SQL*Plus to manage policy-managed databases.
Note:
Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.For example, when using pluggable databases (PDBs)—regardless of whether those databases are managed in an administrator-managed or a policy-managed style—you must consider that any alteration performed on the PDB using a SQL*Plus connection will, by default, only affect the current instance. To make changes affecting all instances that belong to the PDB, you must use the ALTER PLUGGABLE DATABASE
command with instance=all
. When using PDBs you must connect, using a dynamic database service (net_service_name
), to an instance, as PDBs represent themselves as dynamic database services associated with one or more instances of an Oracle RAC database.
Because, by default, the SQL*Plus prompt does not identify the current instance, you should direct your commands to the correct instance. Starting a SQL*Plus session and connecting to the database without specifying an instance directs all SQL*Plus commands to the local instance. In this case, the default instance is also the current instance.
Since the SQL*Plus prompt does not identify the current instance by default, you should direct your commands to the correct instance. Starting a SQL*Plus session and connecting to the database without specifying an instance directs all SQL*Plus commands to the local instance. In this case, the default instance is also the current instance. To connect to a different instance in SQL*Plus, issue a new CONNECT
command and specify a remote instance net service name, as shown in the following example, where password
is the password:
CONNECT user_name@net_service_name
Enter password: password
Connecting as SYSOPER
or SYSRAC
enables you to perform privileged operations, such as instance startup and shutdown. Multiple SQL*Plus sessions can connect to the same instance at the same time. SQL*Plus automatically disconnects you from the first instance whenever you connect to another one.
Note:
Use theSYSASM
privilege instead of the SYSRAC
privilege to connect to and administer an Oracle ASM instance. If you use the SYSRAC
privilege to connect to an Oracle ASM instance, then Oracle Database writes warnings to the alert log files because commands that run using the SYSRAC
privilege on an Oracle ASM instance are deprecated.
How SQL*Plus Commands Affect Instances
You can use SQL*Plus to start and stop instances in the Oracle RAC database.
Most SQL statements affect the current instance. You do not need to run SQL*Plus commands as root
on Linux and UNIX systems or as Administrator
on Windows systems. You need only the proper database account with the privileges that you normally use for a noncluster Oracle database. Some examples of how SQL*Plus commands affect instances are:
-
ALTER SYSTEM CHECKPOINT LOCAL
affects only the instance to which you are currently connected, rather than the default instance or all instances. -
ALTER SYSTEM CHECKPOINT
orALTER SYSTEM CHECKPOINT GLOBAL
affects all instances in the cluster database. -
ALTER SYSTEM SWITCH LOGFILE
affects only the current instance.-
To force a global log switch, use the
ALTER SYSTEM ARCHIVE LOG CURRENT
statement. -
The
INSTANCE
option ofALTER SYSTEM ARCHIVE LOG
enables you to archive each online redo log file for a specific instance.
-
The following table describes how SQL*Plus commands affect instances.
Table 3-1 How SQL*Plus Commands Affect Instances
SQL*Plus Command | Associated Instance |
---|---|
ARCHIVE LOG |
Always affects the current instance. |
CONNECT |
Affects the default instance if no instance is specified in the |
HOST |
Affects the node running the SQL*Plus session, regardless of the location of the current and default instances. |
RECOVER |
Does not affect any particular instance, but rather the database. |
SHOW INSTANCE |
Displays information about the current instance, which can be different from the default local instance if you have redirected your commands to a remote instance. |
SHOW PARAMETER and SHOW
SGA |
Displays parameter and SGA information from the current instance. |
STARTUP and SHUTDOWN |
Always affects the current instance. These are privileged SQL*Plus commands. |
Parent topic: Tools for Administering Oracle RAC
Starting and Stopping Instances and Oracle RAC Databases
You can start and stop instances with Oracle Enterprise Manager, SQL*Plus, or SRVCTL.
Both Oracle Enterprise Manager and SRVCTL provide options to start and stop all of the instances in an Oracle Real Application Clusters (Oracle RAC) database with a single step.
Using any tool, you can choose the startup state to which you want to start the database. The state of the database and database instance will determine what operations you can perform. You can perform certain operations only when the database is in the MOUNT
(NOMOUNT
) state. Performing other operations requires that the database be in the OPEN
state.
Note:
Oracle does not support running more than one instance of the same database on the same node.To start an Oracle RAC database instance on a node in the cluster, you must first start the Oracle Grid Infrastructure stack on the node. An Oracle RAC database instance will not start on a server on which the Oracle Grid Infrastructure stack is not running.
Oracle Database QoS Management Policy Workload Criticality Determines Database Startup Order
If a user-created Oracle Database Quality of Service Management
(Oracle Database QoS Management) policy is active, then the ranked order of the performance classes determines the order in which the associated Oracle RAC databases start or request real-time LMS process slots. Using the performance class rankings ensures that mission-critical databases running in a consolidated environment have their LMS processes run in real time, thus eliminating a resource bottleneck within inter-node communication. Because the Oracle Database QoS Management policy specifies the rank of each workload, using the value of Max(Ranks)
for each database provides a consistent expression of the expressed business criticality of each database.
- Starting One or More Instances and Oracle RAC Databases Using SRVCTL
Use SRVCTL start Oracle RAC databases and instances. - Stopping One or More Instances and Oracle RAC Databases Using SRVCTL
Use SRVCTL to stop instances and Oracle RAC databases. - Stopping All Databases and Instances Using CRSCTL
You can use thecrsctl stop crs
command on the node or thecrsctl stop cluster -all
command to stop all instances on a node or the entire cluster. - Starting and Stopping Individual Instances Using SQL*Plus
If you want to start or stop just one instance and you are connected to your local node, then you must first ensure that your current environment includes the SID for the local instance.
Related Topics
Parent topic: Administering Database Instances and Cluster Databases
Starting One or More Instances and Oracle RAC Databases Using SRVCTL
Use SRVCTL start Oracle RAC databases and instances.
Note:
This section assumes that you are using an SPFILE for your database.Enter the following SRVCTL syntax from the command line, providing the required database name and instance name, or include multiple instance names to start multiple specific instances:
-
To start your entire cluster database, that is, all of the instances and its dependencies, enter the following SRVCTL command:
$ srvctl start database -db db_unique_name [-startoption start_options]
The following SRVCTL command, for example, mounts all of the non-running instances of an Oracle RAC database:
$ srvctl start database -db orcl -startoption mount
-
To start specific instances of a database, enter a comma-delimited list of instance names:
$ srvctl start instance -db db_unique_name -instance "instance_name_list" [-startoption start_options]
You must enclose a comma-delimited list in double quotation marks (
""
). -
To start an instance of a database on a specific node, use the following command with a single node name:
$ srvctl start instance -db db_unique_name -node node_name [-startoption start_options]
Note:
Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.
The use of CRS configuration policies and the CRS policy set can be desupported in a future release. In place of server pools and policy-managed databases, Oracle recommends that you use the new "Merged" management style.
Note that this command also starts all enabled and non-running services that have
AUTOMATIC
management policy, and for which the database role matches one of the service's roles.
Related Topics
Parent topic: Starting and Stopping Instances and Oracle RAC Databases
Stopping One or More Instances and Oracle RAC Databases Using SRVCTL
Use SRVCTL to stop instances and Oracle RAC databases.
The procedure for shutting down Oracle RAC instances is identical to shutting down instances in noncluster Oracle databases, with the following exceptions:
-
In Oracle RAC, shutting down one instance does not interfere with the operation of other running instances.
-
To shut down an Oracle RAC database completely, shut down every instance that has the database open or mounted.
-
After a
NORMAL
orIMMEDIATE
shutdown, instance recovery is not required. Recovery is required, however, after you issue theSHUTDOWN ABORT
command or after an instance terminates abnormally. An instance that is still running performs instance recovery for the instance that shut down. If no other instances are running, the next instance to open the database performs instance recovery for any instances needing it. -
Using the
SHUTDOWN TRANSACTIONAL
command with theLOCAL
option is useful to shut down a particular Oracle RAC database instance. Transactions on other instances do not block this operation. If you omit theLOCAL
option, then this operation waits until transactions on all other instances that started before you ran theSHUTDOWN
command either commit or rollback, which is a valid approach, if you intend to shut down all instances of an Oracle RAC database.Note:
SHUTDOWN TRANSACTIONAL
andSHUTDOWN TRANSACTIONAL LOCAL
both perform the same action on a nonclustered database but the two commands are different on an Oracle RAC database.
Enter the following SRVCTL syntax from the command line, providing the required database name and instance name, or include multiple instance names to stop multiple specific instances:
-
To stop your entire cluster database, that is, all of the instances and its enabled services, enter the following SRVCTL command:
$ srvctl stop database -db db_unique_name [-stopoption stop_options]
Use the
TRANSACTIONAL
stop option with thesrvctl stop database
command and theTRANSACTIONAL LOCAL
stop option with thesrvctl stop instance
command. -
To stop all instances and their enabled services that are managed by Oracle Clusterware on one or more nodes, enter the following SRVCTL command:
$ srvctl stop instance -node "node_list" [-stopoption stop_options]
-
To stop one or more instances, enter the following SRVCTL syntax from the command line:
$ srvctl stop instance -db db_unique_name {-node "node_list" | -instance "inst_name_list"} [-stopoption stop_options]
You can enter either a comma-delimited list of instance names to stop several instances or you can enter a node name to stop one instance. In Windows you must enclose a comma-delimited list in double quotation marks (
""
).This command also stops the services related to the terminated instances on the nodes where the instances were running. As an example, the following command shuts down the two instances,
orcl3
andorcl4
, on theorcl
database using thefailover
option for CRS to find another node to run the services from it and theimmediate
stop option:$ srvctl stop instance -db orcl -instance "orcl3,orcl4" -failover -stopoption immediate
Stopping All Databases and Instances Using CRSCTL
You can use the crsctl stop crs
command on the node or the crsctl stop cluster -all
command to stop all instances on a node or the entire cluster.
When you want to stop an entire node or cluster (for maintenance purposes, for example), you run either the crsctl stop crs
command on the node or the crsctl stop cluster -all
command, provided you have the required cluster privileges. These commands stop all database instances running on a server or in the cluster and ensure that their state is recovered after you restart the cluster. Using CRSCTL also enables Oracle Clusterware to relocate services and other resources that can run elsewhere.
Using either of these CRSCTL commands to stop all database instances on a server or in the cluster can lead to the database instances being stopped similar to shutdown abort, which requires an instance recovery on startup. If you use SRVCTL to stop the database instances manually before stopping the cluster, then you can prevent a shutdown abort, but this requires that you manually restart the database instances after restarting Oracle Clusterware.
Parent topic: Starting and Stopping Instances and Oracle RAC Databases
Starting and Stopping Individual Instances Using SQL*Plus
If you want to start or stop just one instance and you are connected to your local node, then you must first ensure that your current environment includes the SID for the local instance.
Note that any subsequent commands in your session, whether inside or outside a SQL*Plus session, are associated with that same SID.
Note:
This section assumes you are using an SPFILE.
To start or shutdown your local instance, initiate a SQL*Plus session and connect with the SYSRAC or SYSOPER privilege and then issue the required command. For example to start and mount an instance on your local node, run the following commands in your SQL*Plus session:
CONNECT / AS SYSRAC
STARTUP MOUNT
Note:
If you use Oracle ASM disk groups, then use the SYSASM privilege instead of the SYSRAC privilege to connect to and administer the Oracle ASM instances.
Oracle recommends that you do not use SQL*Plus to manage Oracle ASM instances in an Oracle RAC environment. Oracle Clusterware automatically manages Oracle ASM instances, as required. If manual intervention is necessary, then use respective SRVCTL commands.
You can start multiple instances from a single SQL*Plus session on one node using Oracle Net Services. Connect to each instance in turn by using a Net Services connection string, typically an instance-specific alias from your tnsnames.ora
file.
For example, you can use a SQL*Plus session on a local node to perform a transactional shutdown for two instances on remote nodes by connecting to each in turn using the instance's individual alias name. Assume the alias name for the first instance is db1
and that the alias for the second instance is db2
. Connect to the first instance and shut it down as follows:
CONNECT /@db1 AS SYSRAC
SHUTDOWN TRANSACTIONAL
Note:
To ensure that you connect to the correct instance, you must use an alias in the connect string that is associated with just one instance. If you use a connect string that uses a TNS alias that connects to a service or an Oracle Net address that lists multiple IP addresses, then you might not be connected to the specific instance you want to shut down.
Then connect to and shutdown the second instance by entering the following from your SQL*Plus session:
CONNECT /@db2 AS SYSRAC
SHUTDOWN TRANSACTIONAL
It is not possible to start or stop multiple instances, simultaneously, with SQL*Plus, so you cannot start or stop all of the instances for a cluster database with a single SQL*Plus command. You may want to create a script that connects to each instance in turn and start it up and shut it down. However, you must maintain this script manually if you add or drop instances.
Starting and Stopping PDBs in Oracle RAC
You can use SRVCTL commands to manage PDBs.
Note:
Starting with Oracle Database 21c, installation of non-CDB Oracle Database architecture is no longer supported. Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.Starting in Oracle Database 21c, PDBs are a resource managed by Oracle Clusterware.
Consider a admin-managed CDB called raccont
that has a PDB called
spark
.
Note:
If you attempt to create the service without first creating the PDB, then you will get an error message indicating you must create the PDB resource first.If the spark
PDB was created with cardinality set to 1, or 2, or
ALL, then if you create a service named plug
for the PDB, the service can use
the –cardinality
argument, too. If the spark
PDB was created
without specifying the -cardinality
argument, then new services you create
for the PDB use the -preferred
or -available
arguments, not
the –cardinality
argument.
Because PDBs are managed as an Oracle Clusterware resource, typical Oracle RAC-based management practices apply. For this reason, if the PDB spark
is in the online state when Oracle Clusterware is shut down on a server hosting this service, then the PDB is restored to its original state after the restart of Oracle Clusterware on this server. Thus, starting PDBs is automated as with any other Oracle RAC database.
$ srvctl start pdb -db db_name -pdb pdb_name [-startoption start_options]
$ srvctl start pdb -db db_name -pdb pdb_name -node node_list
[-startoption start_options]
To stop a PDB and all its services on all nodes within a database using the IMMEDIATE option:
$ srvctl stop pdb -db db_name -pdb pdb_name -stopoption IMMEDIATE -drain_timeout 0
-stopsvcoption IMMEDIATE
$ srvctl stop pdb -db db_name -pdb pdb_name -node node_list
[-stopoption stop_options] [-stopsvcoption stop_service_options
[-drain_timeout timeout]
If you do not want the spark
PDB to restart when the Oracle RAC database is restarted on all, or on a specific node, use the following command:
srvctl disable pdb -db raccont -pdb spark [-node node_name]
To view the status of the PDB service plug
, use the following command:
srvctl status service -db raccont -service plug -verbose
To view the status of the PDB spark
, use the following command:
srvctl status pdb -db raccont -pdb plug -detail
To modify the configuration of the PDB, use the following command:
srvctl modify pdb -db db_unique_name -pdb pdb_name
[-cardinality {num_of_instances | ALL}]
[-maxcpu max_cpu_usage] [-mincpuunit min_cpu_usage]
[-rank rank] [-startoption start_options]
[-stopoption stop_options] [-policy policy]
Note:
You can modify the-cardinality
parameter only if you had set the
-cardinality
parameter when creating the PDB.
Related Topics
Parent topic: Administering Database Instances and Cluster Databases
Pluggable Database Rank
The PDB -rank
parameter defines relative importance of the
PDBs, which are created specifying cardinality, in a database with the RANK
management policy.
The pluggable databases (PDB) rank is a predefined value that you can assign to a PDB
to specify workload importance of the PDB. Oracle Clusterware makes several decisions
based on the rank of the PDB. By default, Oracle Clusterware has the same workload
importance for each PDB. However, with the PDB -rank
parameter, you can
choose from a set of predefined values to distinguish workload importance of a PDB. The
higher rank means the higher PDB workload importance, for example, the PDB rank 5 is the
highest rank and 1 is the lowest rank.
The PDB -rank
parameter is optional, and it is not set by default.
You can configure it using the srvctl modify pdb
command. When the
-rank
parameter is set, Oracle Clusterware gives precedence to the
PDBs with ranks to perform the following operations:
-
Determines the startup order of the PDBs in the cluster. Oracle Clusterware attempts to start PDBs with the highest rank before the other PDBs with the lower ranks.
- Shuts down a cluster database instance, with the
RANK
management policy, if there are no running PDBs that require that database instance. -
Decides whether to refuse starting the PDBs or stop running the PDBs when the cluster does not have sufficient resources to meet resource requirements of the PDBs with higher ranks when PDB’s resource requirements are set to non-default values. The PDBs with non-default rank and resource requirement values have higher priority than the PDBs with default rank and resource requirement values.
If a PDB in CDB1 has RANK 3 and a PDB in CDB2 has RANK 2, and if there are only enough resources to start only one CDB, then Oracle Clusterware starts CDB1 by dependency because the PDB in CDB1 has a higher rank. Oracle Clusterware does not start CDB2 because the PDB in CDB2 has a lower rank.
How PDB Rank Works?
If the PDB -rank
parameter is defined, then Oracle
Clusterware first considers PDB with the highest rank and then considers number of
required CPUs while failing over the PDBs. For example, in a three node cluster with
four CPUs in each node, and three PDBs named PDB1 with RANK 1 and CPU count 4, PDB2
with RANK 2 and CPU count 4, and PDB3 with RANK 3 and CPU count 4, Oracle
Clusterware handles failover in the following order:
- The cluster has enough resources to start all PDBs. When the first node fails, PDB2 and PDB3 keep running, but Oracle Clusterware stops PDB1 because it has the lowest rank. If PDB2 and PDB3 were hosted on the failed node, then Oracle Clusterware stops PDB1 on the running nodes and starts PDB2 and PDB3 on these nodes.
- When the second node fails, PDB3 keeps running, but Oracle Clusterware stops PDB2 because it has the lowest rank. If PDB3 was hosted on the failed node, then Oracle Clusterware stops PDB2 on the running node and starts PDB3 on that node.
- PDBs can run from different CDBs. If you have multiple CDBs and any of these CDBs does not have a running PDB, then Oracle Clusterware shuts down the CDBs that do not have any running PDBs.
The rank of a PDB is set for the entire cluster, not just for the CDB in which you create a PDB.
Parent topic: Administering Database Instances and Cluster Databases
Pluggable Database Placement
Configure PDBs to either run explicitly in the specified CDB instances or run dynamically in any CDB or a subset of CDBs in the cluster.
You can choose from the following two placement options for the PDBs:
-
Preferred and Available PDBs: These PDBs can run only in the explicitly specified CDB instances that are running on the list of specified cluster nodes. While configuring such PDBs, you need to provide a CDB name and the list of instances or nodes where the CDB can run. You can modify the list of instances or nodes where the CDB can run.
-
Floating PDBs: These PDBs are created with specified cardinality and they can run on any instance of the CDB in which they are created. The cardinality of a PDB governs the number of nodes where a PDB can run at the same time. If you use a number for cardinality instead of
ALL
, then which instances the PDBs are opened in depends on the available resources of each instance.Oracle Clusterware evaluates resources for each cluster database instance based on the values of the
-maxcpu
and-mincpuunit
parameters for the PDB. You must be logged in as either thegrid
or theroot
user to modify the-maxcpu
,-mincpuunit
, and-rank
parameters.
You can configure the PDB placement option either while creating a new PDB or by modifying an existing PDB.
Parent topic: Administering Database Instances and Cluster Databases
Example of Creating a Pluggable Database with Cardinality and Rank
You can use these examples to see how to create an Oracle database and create a pluggable database, specifying cardinality, in the Oracle database.
You can define relative importance of pluggable databases in an Oracle
database using the -rank
parameter. This option works for the pluggable
databases that are created specifying cardinality in a database with the RANK management
policy.
The following examples show you how to create an Oracle database with the
RANK
management policy, add a pluggable database in the Oracle database
specifying cardinality, and modify the PDB cardinality.
Example 3-1 Creating an Oracle Database Using SRVCTL
In this example, you create an Oracle database DATA
with the
RANK
management policy using SRVCTL:
$ srvctl add database -db db_unique_name -policy RANK -oraclehome $ORACLE_HOME -dbname DATA
Example 3-2 Creating a Pluggable Database Using SRVCTL
In this example, you create a pluggable database MYPDB
,
specifying cardinality, in Oracle database DATA
using SRVCTL:
$ srvctl add pdb -db DATA -pdb MYPDB -cardinality 2
Note:
If you set the management policy of your CDB toRANK
, then the default
policy of your PDBs that you create in that CDB will be set to
RESTART
.
Example 3-3 Checking PDB Configuration Using SRVCTL
In this example, you check configuration of pluggable database
MYPDB
using SRVCTL:
$ srvctl config pdb -db DATA -pdb MYPDB
Pluggable database name: MYPDB
Application Root PDB:
Cardinality: 2
Maximum CPU count (whole CPUs): 0
Minimum CPU count unit (1/100 CPU count): 0
Start Option: open
Stop Option: immediate
Example 3-4 Modifying Pluggable Database Cardinality and Rank Using SRVCTL
In this example, as the grid
user, you modify cardinality of
pluggable database MYPDB
, and set maximum CPU usage, minimum CPU usage, and
rank using SRVCTL:
$ srvctl modify pdb -db DATA -pdb MYPDB -cardinality 1 -maxcpu 3 -mincuuunit 20 -rank 2
Parent topic: Administering Database Instances and Cluster Databases
Reducing Downtime During Database and Instance Outages
Outages can be either planned (maintenance) or unplanned. You can use features to help minimize both types of outages.
In an Oracle RAC database, the outage of a single instance does not affect database availability. If a server or instance fails, restart and recovery are automatic, including the restarting of the subsystems, such as the listener and the Oracle Automatic Storage Management (Oracle ASM) processes, not just the database. User sessions that connect using a service can be transitioned to a surviving instance automatically. This happens transparently, with little impact to the users.
If the entire database needs to be stopped, then this can be done in a rolling fashion. You can stop each instance individually with stopping the entire database. While an instance is stopped, you perform the task that required the database to be stopped, and then restart the instance. This process is repeated until each instance in the Oracle RAC database has been stopped and restarted.
There are additional features you can use to minimize outages, both planned and unplanned:
- The Oracle RAC high-availability framework maintains service availability by using Oracle Clusterware and resource profiles. Oracle Clusterware recovers and balances services according to business rules and the service attributes. If these services are used for client connections to the database, then they are automatically redirected to a surviving instance instead of getting an outage error.
- For repairs, upgrades, and changes that require you to isolate one or more instances or nodes, Oracle RAC provides interfaces that relocate, disable, and enable services to minimize service disruption to application users.
- Fast Application Notification (FAN) provides immediate interrupt of clients following outages related to the database, nodes, and networks. FAN notifies clients immediately when resources become available and initiates draining of database sessions so clients experience no outages during planned maintenance. Oracle connection pools, for example, use FAN to receive very fast notification of failures, to balance connections following failures, and to balance connections again after the failed components are repaired.
- Application Continuity is a feature that enables the replay, in a non-disruptive and rapid manner, of a request against the database after a recoverable error that makes the database session unavailable so an outage appears to the user as no more than a delayed execution of the request.
For planned outages, you can achieve almost no interruption to users (zero brownout) in Oracle Database 21c. A phased shutdown of an instance allows the surviving instances to take ownership of locks and other resources so that after the instance is stopped, the amount of work required during reconfiguration is reduced. When the DBA issues a shutdown command for an instance, the instance is transitioned from an active instance to a passive instance.
A passive instance is in an ideal state to be stopped, which means as many resources and locks as possible are transitioned to the active instances. On a Oracle RAC cluster only one passive instance can exist at any time. When this process is initiated, the following actions take place:
- The services running on the passive instance are stopped and relocated to another instance. This includes moving the connections from the passive instance to the active instance with a targeted drain timeout. The drain timeout indicates how long you want to wait for everything to complete, including the shutting down of the passive instance.
- After the services have been drained from the passive instance, all pluggable databases (PDBs) are closed. All lock masters are transferred from the passive instance to active instances.
- The instance is shutdown using the specified shutdown option.
Parent topic: Administering Database Instances and Cluster Databases
Verifying That Instances are Running
To verify that a database instance is available, use Oracle Enterprise Manager, SRVCTL, or SQL*Plus.
- Using SRVCTL to Verify That Instances are Running
You can use SRVCTL to verify that instances are running on a particular database. - Using SQL*Plus to Verify That Instances are Running
You can use SQL*Plus to verify that database instances are running.
Parent topic: Administering Database Instances and Cluster Databases
Using SRVCTL to Verify That Instances are Running
You can use SRVCTL to verify that instances are running on a particular database.
The following command provides an example of using SRVCTL to check the status of the database instances for the Oracle RAC database named mail:
$ srvctl status database -db mail
This command returns output similar to the following:
Instance mail1 is running on node betal011
Instance mail2 is running on node betal010
Additionally, you can check whether a PDB is running in the cluster, as follows:
$ srvctl status pdb -db db_unique_name -pdb pdb_name
Parent topic: Verifying That Instances are Running
Using SQL*Plus to Verify That Instances are Running
You can use SQL*Plus to verify that database instances are running.
-
On any node, from a SQL*Plus prompt, connect to a database instance by using a Net Services connection string, typically an instance-specific alias from your
tnsnames.ora
file.CONNECT /@db1 as SYSRAC
-
Query the V$ACTIVE_INSTANCES view, using the following statement:
CONNECT SYS/as SYSRAC Enter password: password SELECT * FROM V$ACTIVE_INSTANCES;
This query returns output similar to the following:
INST_NUMBER INST_NAME ----------- ----------------- 1 db1-sun:db1 2 db2-sun:db2 3 db3-sun:db3
The output columns for this example are shown in the following table.
Table 3-2 Descriptions of V$ACTIVE_INSTANCES Columns
Column | Description |
---|---|
INST_NUMBER |
Identifies the instance number. |
INST_NAME |
Identifies the host name and instance name as |
Related Topics
Parent topic: Verifying That Instances are Running
Terminating Sessions On a Specific Cluster Instance
You can use the ALTER SYSTEM KILL SESSION
statement to terminate a session on a specific instance.
When a session is terminated, any session active transactions are rolled back, and resources held by the session (such as locks and memory areas) are immediately released and available to other sessions.
Using the ALTER SYSTEM KILL SESSION
statement enables you to maintain strict application service-level agreements in Oracle RAC environments. Often, the goal of a service-level agreement is to carry out a transaction in a specified time limit. In an Oracle RAC environment, this may require terminating a transaction on an instance, and retrying the transaction on another instance within a specified time frame.
Note:
You can use Application Continuity to hide the cancellation of a transaction from the user, if the application initially used an Application Continuity-enabled dynamic database service to connect to the database instance.
For a more granular approach to service-level management, Oracle recommends that you use Oracle Database Quality of Service Management (Oracle Database QoS Management) for all Oracle RAC-based databases.
To terminate sessions, follow these steps:
-
Query the value of the
INST_ID
column in theGV$SESSION
dynamic performance view to identify which session to terminate. -
Issue the
ALTER SYSTEM KILL SESSION
and specify the session index number (SID) and serial number of a session that you identified with theGV$SESSION
dynamic performance view.KILL SESSION 'integer1, integer2[, @integer3]'
-
For
integer1
, specify the value of the SID column. -
For
integer2
, specify the value of theSERIAL#
column. -
For the optional
integer3
, specify the ID of the instance where the session to be killed exists. You can find the instance ID by querying theGV$
tables.
To use this statement, your instance must have the database open, and your session and the session to be terminated must be on the same instance unless you specify
integer3
. -
If the session is performing some activity that must be completed, such as waiting for a reply from a remote database or rolling back a transaction, then Oracle Database waits for this activity to complete, marks the session as terminated, and then returns control to you. If the waiting lasts a minute, then Oracle Database marks the session to be terminated and returns control to you with a message that the session is marked to be terminated. The PMON background process then marks the session as terminated when the activity is complete.
Examples of Identifying and Terminating Sessions
The following examples provide three scenarios in which a user identifies and terminates a specific session. In each example, the SYSDBA first queries the GV$SESSION
view for the SCOTT
user's session to identify the session to terminate, and then runs the ALTER SYSTEM KILL SESSION
statement to terminate the session on the instance.
Example 3-5 Identify and terminate the session on an busy instance
In this example, assume that the executing session is SYSDBA
on the instance INST_ID=1
. The ORA-00031
message is returned because some activity must be completed before the session can be terminated.
SQL> SELECT SID, SERIAL#, INST_ID FROM GV$SESSION WHERE USERNAME='SCOTT';
SID SERIAL# INST_ID
---------- ---------- ----------
80 4 2
SQL> ALTER SYSTEM KILL SESSION '80, 4, @2';
alter system kill session '80, 4, @2'
*
ERROR at line 1:
ORA-00031: session marked for kill
SQL>
Example 3-6 Identify and terminate the session on an idle instance
In this example, assume that the executing session is SYSDBA
on the instance INST_ID=1
. The session on instance INST_ID=2
is terminated immediately when Oracle Database executes the statement within 60 seconds.
SQL> SELECT SID, SERIAL#, INST_ID FROM GV$SESSION WHERE USERNAME='SCOTT';
SID SERIAL# INST_ID
---------- ---------- ----------
80 6 2
SQL> ALTER SYSTEM KILL SESSION '80, 6, @2';
System altered.
SQL>
Example 3-7 Using the IMMEDIATE parameter
The following example includes the optional IMMEDIATE
clause to immediately terminate the session without waiting for outstanding activity to complete.
SQL> SELECT SID, SERIAL#, INST_ID FROM GV$SESSION WHERE USERNAME='SCOTT';
SID SERIAL# INST_ID
---------- ---------- ----------
80 8 2
SQL> ALTER SYSTEM KILL SESSION '80, 8, @2' IMMEDIATE;
System altered.
SQL>
Overview of Initialization Parameter Files in Oracle RAC
The initialization parameters for an Oracle RAC database are stored in a SPFILE.
When you create the database, Oracle Database creates an SPFILE in the file location that you specify. This location can be either an Oracle Automatic Storage Management (Oracle ASM) disk group or a cluster file system. If you manually create your database, then Oracle recommends that you create an SPFILE from an initialization parameter file (PFILE).
Note:
Oracle RAC uses a traditional PFILE only if an SPFILE does not exist or if you specifyPFILE
in your STARTUP
command. Oracle recommends that you use an SPFILE to simplify administration, to maintain parameter setting consistency, and to guarantee parameter setting persistence across database shutdown and startup events. In addition, you can configure Oracle Recovery Manager (RMAN) to back up your SPFILE.
All instances in the cluster database use the same SPFILE at startup. Because the SPFILE is a binary file, do not directly edit the SPFILE with an editor. Instead, change SPFILE parameter settings using Oracle Enterprise Manager or ALTER SYSTEM
SQL statements.
- About Creating an SPFILE for Oracle RAC
All instances in an Oracle Real Application Clusters environment must use the same server parameter file. - Setting SPFILE Parameter Values for Oracle RAC
You can change SPFILE settings with Oracle Enterprise Manager or by using theSET
clause of theALTER SYSTEM
statement. - Parameter File Search Order in Oracle RAC
Oracle Database searches for your parameter file in a particular order depending on your platform. For Oracle RAC databases, you can easily determine the location of the parameter file by using thesrvctl config database
command. - Backing Up the Server Parameter File
Oracle recommends that you regularly back up the server parameter file for recovery purposes.
Parent topic: Administering Database Instances and Cluster Databases
About Creating an SPFILE for Oracle RAC
All instances in an Oracle Real Application Clusters environment must use the same server parameter file.
However, when otherwise permitted, individual instances can have different settings of the same parameter within this one file. Instance-specific parameter definitions are specified as SID.parameter = value
, where SID
is the instance identifier.
For Oracle RAC, the location of the SPFILE is an attribute of the database resource managed by Oracle Clusterware. When creating a new SPFILE, if the instance from which you issued the command is running, then the following command creates a new SPFILE and automatically updates the database resource with the new SPFILE location:
CREATE SPFILE='location' FROM PFILE;
In this case, you can start up the database without referring to the server parameter file by name.
If the instance from which you issued the command is not running, then the SPFILE in the database resource must be updated manually using srvctl modify database -db dbname -spfile spfile_path
. Also, if you use the following commands, then the SPFILE location is not automatically updated in the database resource:
CREATE SPFILE FROM PFILE [AS COPY];
CREATE SPFILE='location' FROM PFILE AS COPY;
CREATE SPFILE FROM MEMORY;
When creating an SPFILE, if you include the FROM MEMORY
clause (for example, CREATE PFILE FROM MEMORY
or CREATE SPFILE FROM MEMORY
), then the CREATE
statement creates a PFILE or SPFILE using the current system-wide parameter settings. Because the FROM MEMORY
clause requires all other instances to send their parameter settings to the instance that is trying to create the parameter file, the total execution time depends on the number of instances, the number of parameter settings on each instance, and the amount of data for these settings.
Parent topic: Overview of Initialization Parameter Files in Oracle RAC
Setting SPFILE Parameter Values for Oracle RAC
You can change SPFILE settings with Oracle Enterprise Manager or by using the SET
clause of the ALTER SYSTEM
statement.
Note:
Modifying the SPFILE using tools other than Oracle Enterprise Manager or SQL*Plus can corrupt the file and prevent database startup. To repair the file, you might be required to create a PFILE and then regenerate the SPFILE.The examples in this section appear in ASCII text although the SPFILE is a binary file. Assume that you start an instance with an SPFILE containing the following entries:
*.OPEN_CURSORS=500
prod1.OPEN_CURSORS=1000
The value before the period (.) in an SPFILE entry identifies the instance to which the particular parameter value belongs. When an asterisk (*) precedes the period, the value is applied to all instances that do not have a subsequent, individual value listed in the SPFILE.
For the instance with the Oracle system identifier (SID) prod1
, the OPEN_CURSORS
parameter is set to 1000
even though it has a database-wide setting of 500
. Parameter file entries that have the asterisk (*) wildcard character only affect the instances without an instance-specific entry. This gives you control over parameter settings for instance prod1
. These two types of settings can appear in any order in the parameter file.
If another DBA runs the following statement, then Oracle Database updates the setting on all instances except the instance with SID prod1
:
ALTER SYSTEM SET OPEN_CURSORS=1500 sid='*' SCOPE=SPFILE;
The SPFILE now has the following entries for OPEN_CURSORS
:
*.OPEN_CURSORS=1500
prod1.OPEN_CURSORS=1000
Run the following statement to reset OPEN_CURSORS
to its default value for all instances except prod1
:
ALTER SYSTEM RESET OPEN_CURSORS SCOPE=SPFILE;
The SPFILE now has just the following entry for prod1
:
prod1.OPEN_CURSORS=1000
Run the following statement to reset the OPEN_CURSORS
parameter to its default value for instance prod1
only:
ALTER SYSTEM RESET OPEN_CURSORS SCOPE=SPFILE SID='prod1';
Parent topic: Overview of Initialization Parameter Files in Oracle RAC
Parameter File Search Order in Oracle RAC
Oracle Database searches for your parameter file in a particular order depending on your platform. For Oracle RAC databases, you can easily determine the location of the parameter file by using the srvctl config database
command.
On Linux and UNIX platforms, the search order is as follows:
- The location specified by the
-spfile
attribute for the database resource managed by Oracle Clusterware. -
The
spfilesid.ora
file in the location returned by the$ORACLE_HOME/bin/orabaseconfig
utility, in the subdirectory/dbs
. -
The
spfile.ora
file in the location returned by the$ORACLE_HOME/bin/orabaseconfig
utility, in the subdirectory/dbs
. -
The
initsid.ora
file in the location returned by the$ORACLE_HOME/bin/orabaseconfig
utility, in the subdirectory/dbs
.
On Windows platforms, the search order is as follows:
-
%ORACLE_HOME%\database\spfile
sid
.ora
-
%ORACLE_HOME%\database\spfile.ora
-
%ORACLE_HOME%\database\init
sid
.ora
Note:
Oracle recommends that you do not use the default SPFILE names because all instances must use the same file and they all have different SIDs. Instead, store the SPFILE on Oracle ASM. If you store the SPFILE on a cluster file system, then use the following naming convention for the SPFILE:path/dbs/spfiledb_unique_name.ora
. Create a PFILE named path/dbs/initsid.ora
that contains the name SPFILE=path/dbs/spfiledb_unique_name.ora
.
Related Topics
Parent topic: Overview of Initialization Parameter Files in Oracle RAC
Backing Up the Server Parameter File
Oracle recommends that you regularly back up the server parameter file for recovery purposes.
Do this using Oracle Enterprise Manager or use the CREATE PFILE
statement. For example:
CREATE PFILE='/u01/oracle/dbs/test_init.ora'
FROM SPFILE='/u01/oracle/dbs/test_spfile.ora';
You can use Recovery Manager (RMAN) to create backups of the server parameter file. You can also recover an SPFILE by starting an instance using a client-side initialization parameter file. Then re-create the server parameter file using the CREATE SPFILE
statement. Note that if the parameter file that you use for this operation was for a single instance, then the parameter file does not contain instance-specific values, even those that must be unique in Oracle RAC instances. Therefore, ensure that your parameter file contains the appropriate settings as described earlier in this chapter.
To ensure that your SPFILE (and control files) are automatically backed up by RMAN during typical backup operations, use Oracle Enterprise Manager or the RMAN CONTROLFILE AUTOBACKUP
statement to enable the RMAN autobackup feature
Related Topics
Parent topic: Overview of Initialization Parameter Files in Oracle RAC
Initialization Parameter Use in Oracle RAC
By default, most parameters are set to a default value and this value is the same across all instances.
However, many initialization parameters can also have different values on different instances as described in Initialization Parameters Specific to Oracle RAC. Other parameters must either be unique or identical as described in the following sections:
- Initialization Parameters Specific to Oracle RAC
The following table summarizes the initialization parameters used specifically for Oracle RAC databases. - Parameters That Must Have Identical Settings on All Instances
Certain parameters that are critical at database creation or that affect certain database operations must have the same value for every instance in an Oracle RAC database. - Parameters That Have Unique Settings on All Instances
Certain parameters are unique to each instance, such as theINSTANCE_NUMBER
parameter. - Parameters That Should Have Identical Settings on All Instances
Oracle recommends that the parameters listed here have identical settings on all instances.
Related Topics
Parent topic: Administering Database Instances and Cluster Databases
Initialization Parameters Specific to Oracle RAC
The following table summarizes the initialization parameters used specifically for Oracle RAC databases.
Parameter | Description |
---|---|
ACTIVE_INSTANCE_COUNT |
This initialization parameter was deprecated in Oracle RAC 11g release 2 (11.2). Instead, use a service with one preferred and one available instance. |
ASM_PREFERRED_READ_FAILURE_GROUPS |
Specifies a set of disks to be the preferred disks from which to read mirror data copies. The values you set for this parameter are instance specific and need not be the same on all instances. |
CLUSTER_DATABASE |
Enables a database to be started in cluster mode. Set this parameter to |
CLUSTER_DATABASE_INSTANCES |
Oracle RAC uses this parameter to allocate adequate memory resources. It must be set to the same value on all instances. Note: Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated. You can set this parameter to a value that is greater than the current number of instances, if you are planning to add instances. |
CLUSTER_INTERCONNECTS |
Specifies an alternative cluster interconnect for the private network when there are multiple interconnects. Notes:
|
DB_NAME |
If you set a value for |
DISPATCHERS |
Set the Oracle recommends that you configure at least the |
GCS_SERVER_PROCESSES |
This static parameter specifies the initial number of server processes for an Oracle RAC instance's Global Cache Service (GCS). The GCS processes manage the routing of inter-instance traffic among Oracle RAC instances. The default number of GCS server processes is calculated based on system resources with a minimum setting of 2. For systems with one CPU, there is one GCS server process. For systems with two to eight CPUs, there are two GCS server processes. For systems with more than eight CPUs, the number of GCS server processes equals the number of CPUs divided by 4, dropping any fractions. For example, if you have 10 CPUs, then 10 divided by 4 means that your system has 2 GCS processes. You can set this parameter to different values on different instances. |
INSTANCE_NAME |
Specifies the unique name of an instance. Clients can use this name to force their session to be connected to a specific instance in the cluster. The format of the Note: In Grid Plug and Play environments, the |
RESULT_CACHE_MAX_SIZE |
In a clustered database, you can either set
If you do not set the Starting with Oracle Database 21c, the result cache fetch functionality has been
enhanced. Before fetching a cached result from a remote instance,
the database uses heuristics to determine if it is more cost
efficient to recompute the result on the local instance. You can
monitor the use of this functionality by querying the
|
SERVICE_NAMES |
When you use services, Oracle recommends that you do not set a value for the The service features described in Workload Management with Dynamic Database Services are not directly related to the features that Oracle provides when you set Note: Oracle recommends that client connections use services rather than instance names. Entries in the |
SPFILE |
When you use an SPFILE, all Oracle RAC database instances must use the SPFILE and the file must be on shared storage. |
THREAD |
Specifies the number of the redo threads to be used by an instance. You can specify any available redo thread number if that thread number is enabled and is not used. If specified, this parameter must have unique values on all instances. The best practice is to use the |
Parameters That Must Have Identical Settings on All Instances
Certain parameters that are critical at database creation or that affect certain database operations must have the same value for every instance in an Oracle RAC database.
Specify these initialization parameter values in the SPFILE or in the individual PFILEs for each instance. The following list contains the parameters that must be identical on every instance:
COMPATIBLE
CLUSTER_DATABASE
CONTROL_FILES
DB_BLOCK_SIZE
DB_DOMAIN
DB_FILES
DB_NAME
DB_RECOVERY_FILE_DEST
DB_RECOVERY_FILE_DEST_SIZE
DB_UNIQUE_NAME
INSTANCE_TYPE
(RDBMS or ASM)PARALLEL_EXECUTION_MESSAGE_SIZE
REMOTE_LOGIN_PASSWORDFILE
UNDO_MANAGEMENT
The following parameters must be identical on every instance only if the parameter value is set to zero:
DML_LOCKS
RESULT_CACHE_MAX_SIZE
Parent topic: Initialization Parameter Use in Oracle RAC
Parameters That Have Unique Settings on All Instances
Certain parameters are unique to each instance, such as the INSTANCE_NUMBER
parameter.
Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.
When it is necessary to set parameters that have unique settings on a
policy-managed database, you can ensure that instances always use the same name on
particular nodes by running the srvctl modify instance -n node_name -i instance_name
command for each server that can be assigned to the database's server pool. Then a
unique value of the parameter can be specified for instance_name
that is used whenever the database runs on
node_name
.
Specify the ORACLE_SID
environment variable, which consists
of the database name and the number of the INSTANCE_NAME
assigned to
the instance.
Use the CLUSTER_INTERCONNECTS
initialization parameter to
specify an alternative interconnect to the one Oracle Clusterware is using for the
private network. Each instance of the Oracle RAC database gets a unique value when
setting the CLUSTER_INTERCONNECTS
initialization parameter.
Oracle Database uses the INSTANCE_NUMBER
parameter to
distinguish among instances at startup and the INSTANCE_NAME
parameter
to assign redo log groups to specific instances. The instance name can take the form
db_unique_name_instance_number
and when it has this form of name and number separated by an underscore, the number
after the underscore is used as the INSTANCE_NUMBER
. With Oracle
Database 11.2 using Grid Plug and Play, you no longer have to explicitly assign instance
numbers for policy-managed databases and the instance name defaults to db_unique_name_instance_number
, where Oracle
Database assigns the instance number.
When you specify UNDO_TABLESPACE
with automatic undo
management enabled, then set this parameter to a unique undo tablespace name for each
instance.
If you use the ROLLBACK_SEGMENTS
parameters, then Oracle
recommends setting unique values for it by using the SID
identifier in
the SPFILE. However, you must set a unique value for INSTANCE_NUMBER
for each instance and you cannot use a default value.
Using the ASM_PREFERRED_READ_FAILURE_GROUPS
initialization
parameter, you can specify a list of preferred read failure group names. The disks in
those failure groups become the preferred read disks. Thus, every node can read from its
local disks. This results in higher efficiency and performance and reduced network
traffic. The setting for this parameter is instance-specific, and the values need not be
the same on all instances.
Parent topic: Initialization Parameter Use in Oracle RAC
Parameters That Should Have Identical Settings on All Instances
Oracle recommends that the parameters listed here have identical settings on all instances.
Oracle recommends that you set the values for the parameters in Table 3-3 to the same value on all instances. Although you can have different settings for these parameters on different instances, setting each parameter to the same value on all instances simplifies administration.
Table 3-3 Parameters That Should Have Identical Settings on All Instances
Parameter | Description |
---|---|
ARCHIVE_LAG_TARGET |
Different values for instances in your Oracle RAC database are likely to increase overhead because of additional automatic synchronization performed by the database processing. When using either Oracle GoldenGate downstream capture or Oracle GoldenGate integrated capture mode in a downstream capture configuration with your Oracle RAC database, the value must be greater than zero. |
CLUSTER_DATABASE_INSTANCES |
While it is preferable for this parameter to have identical settings across all Oracle RAC database instances, it is not required. |
LICENSE_MAX_USERS |
Because this parameter determines a database-wide limit on the number of users defined in the database, it is useful to have the same value on all instances of your database so you can see the current value no matter which instance you are using. Setting different values may cause Oracle Database to generate additional warning messages during instance startup, or cause commands related to database user management to fail on some instances. |
LOG_ARCHIVE_FORMAT |
If you do not use the same value for all your instances, then you unnecessarily complicate media recovery. The recovering instance expects the required archive log file names to have the format defined by its own value of Databases that support Oracle Data Guard, either to send or receive archived redo log files, must use the same value of |
SPFILE |
If this parameter does not identify the same file to all instances, then each instance may behave differently and unpredictably in fail over, load-balancing, and during normal operations. Additionally, a change you make to the SPFILE with an If the SPFILE values are different in instances for which the values were set by the server, then you should restart the instances that are not using the default SPFILE. |
TRACE_ENABLED |
If you want diagnostic trace information to be always available for your Oracle RAC database, you must set |
UNDO_RETENTION |
By setting different values for |
Parent topic: Initialization Parameter Use in Oracle RAC
Converting an Administrator-Managed Database to a Policy-Managed Database
You can convert an administrator-managed database to a policy-managed database.
Note:
Starting with Oracle Grid Infrastructure 21c, policy-managed databases are deprecated.
You can continue to use existing server pools, and create new pools and policies. Resources using existing server pools can continue to use them transparently.
The use of CRS configuration policies and the CRS policy set can be desupported in a future release. In place of server pools and policy-managed databases, Oracle recommends that you use the new "Merged" management style.
If the administrator-managed database is configured for a low-privileged user and you attempt to convert the database to a policy-managed database, then you must manually add a wallet (if one does not already exist) for this low privileged user, so that a Windows service for Oracle Database can be created.
To convert an administrator-managed database:
-
Check the current configuration of all services and the database (if you make a mistake and need to recover, then you can know what the configuration looked like when you began), as follows:
srvctl config database -db db_unique_name srvctl config service -db db_unique_name
-
Create a server pool for the policy-managed database (you must be a cluster administrator to do this), as follows:
srvctl add srvpool -serverpool server_pool -min 0 -max n
In the preceding command, 0 is the minimum number of servers you want in the server pool and
n
is the maximum.Note:
This step does not necessarily place servers in the newly-created server pool. If there are no servers in the Free pool from which the new server pool can allocate servers, for example, then you may have to use the
srvctl relocate server
command to relocate a server from another server pool once the conversion is complete. -
Stop the database using Oracle Enterprise Manager or SRVCTL, as follows:
srvctl stop database -db db_unique_name
-
Modify the database to be in the new server pool, as follows:
srvctl modify database -db db_unique_name -serverpool server_pool
-
Add a service user to the wallet, as follows:
crsctl add wallet -type OSUSER -user user_name -passwd
-
Check the status of the database to confirm that it is now policy managed by repeating the commands in step 1.
Configure Oracle Enterprise Manager to recognize the change you made in the previous procedure, as follows:
-
In order for Oracle Enterprise Manager Cloud Control to recognize the new database instances, you must change the instance name from
db_unique_name#
todb_unique_name_#
(notice the additional underscore (_) before the number sign (#) character). -
Rename the
orapwd
file in thedbs/database
directory (or create a neworapwd
file by running theorapwd
command).By default, there is an
orapwd
file with the instance name appended to it, such asorapwdORCL1
. You must change the name of the file to correspond to the instance name you changed in the previous step. For example, you must changeorapwdORCL1
toorapwdORCL_1
or create a neworapwd
file.
You cannot directly convert a policy-managed database to an administrator-managed database. Instead, you can remove the policy-managed configuration using the srvctl remove database
and srvctl remove service
commands, and then register the same database as an administrator-managed database using the srvctl add database
and srvctl add instance
commands. Once you register the database and instance, you must use the srvctl add service
command to add back the services as you removed them.
Services for administrator-managed databases continue to be defined by the PREFERRED
and AVAILABLE
definitions. For policy-managed databases, a service is defined to a database server pool and can either be uniform (running on all instances in the server pool) or singleton (running on only one instance in the server pool). If you change the management policy of the database, then you must recreate the database services to be either uniform/singleton or PREFERRED
/AVAILABLE
, depending upon which database management policy you choose.
Managing Memory Pressure for Database Servers
Memory Guard detects memory pressure on a server in real time and redirects new sessions to other servers to prevent using all available memory on the stressed server.
Enterprise database servers can use all available memory due to too many open sessions or runaway workloads. Running out of memory can result in failed transactions or, in extreme cases, a restart of the server and the loss of a valuable resource for your applications. Memory Guard detects memory pressure on a server in real time and redirects new sessions to other servers to prevent using all available memory on the stressed server.
Rerouting new sessions to different servers protects the existing workloads on the memory-stressed server and enables the server to remain available. Memory Guard is a feature of Oracle RAC that manages the memory pressure for servers, adding a new resource protection capability in managing service levels for applications hosted on Oracle RAC databases.
When Oracle Database Oracle Database Quality of Service Management is enabled, Cluster Health Monitor sends a metrics stream that provides real-time information about memory resources for the cluster servers to Memory Guard. This information includes the following:
- Amount of available memory
- Amount of memory currently in use
If Memory Guard determines that a node is experiencing memory pressure, then the database services managed by Oracle Clusterware are stopped on that node, preventing new connections from being created. After the memory stress is relieved, the services on that node are restarted automatically, and the listener starts sending new connections to that server. The memory pressure can be relieved in several ways (for example, by closing existing sessions or by user intervention).
Parent topic: Administering Database Instances and Cluster Databases
Quiescing Oracle RAC Databases
The procedure for quiescing Oracle RAC databases is identical to quiescing a noncluster database.
You use the ALTER SYSTEM QUIESCE RESTRICTED
statement from one instance. You cannot open the database from any instance while the database is in the process of being quiesced. When all non-DBA sessions become inactive, the ALTER SYSTEM QUIESCE RESTRICTED
statement finishes, and the database is considered as in a quiesced state. In an Oracle RAC environment, this statement affects all instances, not just the one from which the statement is issued.
To successfully issue the ALTER SYSTEM QUIESCE RESTRICTED
statement in an Oracle RAC environment, you must have the Database Resource Manager feature activated, and it must have been activated since instance startup for all instances in the cluster database. It is through the facilities of the Database Resource Manager that non-DBA sessions are prevented from becoming active. Also, while this statement is in effect, any attempt to change the current resource plan is queued until after the system is unquiesced.
These conditions apply to Oracle RAC:
-
If you issued the
ALTER SYSTEM QUIESCE RESTRICTED
statement but Oracle Database has not finished processing it, you cannot open the database. -
You cannot open the database if it is in a quiesced state.
-
The
ALTER SYSTEM QUIESCE RESTRICTED
andALTER SYSTEM UNQUIESCE
statements affect all instances in an Oracle RAC environment, not just the instance that issues the command.
Note:
You cannot use the quiesced state to take a cold backup. This is because Oracle Database background processes may still perform updates for Oracle Database internal purposes even while the database is in quiesced state. In addition, the file headers of online data files continue to look like they are being accessed. They do not look the same as if a clean shutdown were done. You can still take online backups while the database is in a quiesced state.Related Topics
Parent topic: Administering Database Instances and Cluster Databases
Administering Multiple Cluster Interconnects on Linux and UNIX Platforms
In Oracle RAC environments that run on Linux and UNIX platforms, you can use the CLUSTER_INTERCONNECTS
initialization parameter to specify an alternative interconnect to the one Oracle Clusterware is using for the private network.
Note:
The CLUSTER_INTERCONNECTS
initialization parameter should not be set to highly available IP (HAIP) addresses provided by Redundant Interconnect Usage. HAIP addresses are recognized automatically.
If you set multiple values for CLUSTER_INTERCONNECTS
, then Oracle Database uses all of the network interfaces that you specify for the interconnect, providing load balancing if all of the listed interconnects remain operational. You must use identical values, including the order in which the interconnects are listed, on all instances of your database when defining multiple interconnects with this parameter.
Note:
Oracle does not recommend setting the CLUSTER_INTERCONNECTS
initialization parameter, which overrides the default interconnect settings at the operating system level.
Instead, the best practice is to use Redundant Interconnect Usage, available with Oracle Grid Infrastructure for Oracle RAC and Oracle Real Application Clusters One Node databases, and later. Oracle Database uses operating system-based network bonding technologies to enable high availability (and load balancing) for network interface cards meant to be used as the cluster interconnect. If you want to use multiple database versions in one cluster, you can combine both techniques. Redundant Interconnect Usage will use the interfaces as presented on the operating system level, regardless of bonding. For more information regarding bonding technologies contact your operating system vendor.
Related Topics
Parent topic: Administering Database Instances and Cluster Databases
Use Cases for Setting the CLUSTER_INTERCONNECTS Parameter
The CLUSTER_INTERCONNECTS
initialization parameter requires an IP address. It enables you to specify multiple IP addresses, separated by colons. Oracle RAC network traffic is distributed between the specified IP addresses.
Note:
-
Oracle does not recommend setting the
CLUSTER_INTERCONNECTS
parameter when using a policy-managed database. -
Oracle recommends that all databases and Oracle Clusterware use the same interconnect network.
Typically, you set the CLUSTER_INTERCONNECTS
parameter only in the following situations:
-
The cluster is running multiple databases and you need the interconnect traffic to be separated and you do not use Redundant Interconnect Usage.
-
You have a single IP address that is made highly available by the operating system, and it does not have a stable interface name (for example, the name can change when you restart).
Do not set the CLUSTER_INTERCONNECTS
parameter for the following common configurations:
-
If you want to use Redundant Interconnect Usage.
-
If you have only one cluster interconnect.
-
If the default cluster interconnect meets the bandwidth requirements of your Oracle RAC database, which is typically the case.
Consider the following important points when specifying the CLUSTER_INTERCONNECTS
initialization parameter:
-
The
CLUSTER_INTERCONNECTS
initialization parameter is useful only in Linux and UNIX environments where UDP IPC is enabled. -
Specify a different value for each instance of the Oracle RAC database when setting the
CLUSTER_INTERCONNECTS
initialization parameter in the parameter file. -
The IP addresses you specify for the different instances of the same database on different nodes must belong to network adapters that connect to the same interconnect network.
-
If you specify multiple IP addresses for this parameter, then list them in the same order for all instances of the same database. For example, if the parameter for the first instance on
node1
lists the IP addresses of thealt0:
,fta0:
, andics0:
devices in that order, then the parameter for the second instance onnode2
must list the IP addresses of the equivalent network adapters in the same order. -
If an operating system error occurs while Oracle Database is writing to the interconnect that you specify with the
CLUSTER_INTERCONNECTS
parameter, then Oracle Database returns an error even if some other interfaces are available. This is because the communication protocols between Oracle Database and the interconnect can vary greatly depending on your platform. See your Oracle Database platform-specific documentation for more information.
Example
Consider setting CLUSTER_INTERCONNECTS
when a single cluster interconnect cannot meet your bandwidth requirements. You may need to set this parameter in data warehouse environments with high interconnect bandwidth demands from one or more databases that cannot use Redundant Interconnect Usage.
For example, if you have two databases with high interconnect bandwidth requirements, then you can override the default interconnect provided by your operating system and nominate a different interconnect for each database using the following syntax in each server parameter file where ipn
is an IP address in standard dot-decimal format, for example: 144.25.16.214
:
Database One: crm1.CLUSTER_INTERCONNECTS = ip1
Database Two: ext1.CLUSTER_INTERCONNECTS = ip2
If you have one database with high bandwidth demands, then you can nominate multiple interconnects using the following syntax:
CLUSTER_INTERCONNECTS = ip1:ip2:...:ipn
Related Topics
Customizing How Oracle Clusterware Manages Oracle RAC Databases
Use these examples to minimize Oracle Clusterware control over Oracle RAC databases, which you may need to do during upgrades.
By default, Oracle Clusterware controls database restarts in Oracle RAC environments. In some cases, you may need to minimize the level of control that Oracle Clusterware has over your Oracle RAC database, for example, during database upgrades.
To prevent Oracle Clusterware from restarting your Oracle RAC database when you restart your system, or to avoid restarting failed instances more than once, configure a management policy to define the degree of control. There are three management policies:
- AUTOMATIC: This is the default management policy. The database is automatically restored to its previous running condition (started or stopped) upon restart of the database host computer.
- MANUAL: The database is never automatically restarted upon restart of the database host computer. A MANUAL setting does not prevent Oracle Restart from monitoring the database while it is running and restarting it if a failure occurs.
- NORESTART: Similar to the MANUAL setting, the database is never automatically restarted upon restart of the database host computer. A NORESTART setting, however, never restarts the database even if a failure occurs.
Use SRVCTL commands to display and change the Oracle Clusterware management policies, as shown in the following examples:
Example 1: Display the Current Management Policy
Use the following command syntax to display the current management policy where db_unique_name
is the name of the database for which you want to change management policies:
srvctl config database -db db_unique_name -all
Example 2: Change the Current Management Policy to Another Management Policy
Use the following SRVCTL command syntax to change the current management policy to either AUTOMATIC, MANUAL, or NORESTART:
srvctl modify database -db db_unique_name -policy [AUTOMATIC | MANUAL | NORESTART]
This command syntax sets the resource attribute of the database resource.
Example 3: Specify a Management Policy for a New Database
When you add a new database using the srvctl add database
command, you can use the -policy
parameter to specify the management policy as either AUTOMATIC
, MANUAL
, or NORESTART
, as shown in the following example where db_unique_name
is the name of the database:
srvctl add database -db db_unique_name -policy [AUTOMATIC | MANUAL | NORESTART]
-oraclehome $ORACLE_HOME -dbname DATA
This command syntax places the new database under the control of Oracle Clusterware. If you do not provide a management policy option, then Oracle Database uses the default value of
. After you change the management policy, the Oracle Clusterware resource records the new value for the affected database.
automatic
Related Topics
Parent topic: Administering Database Instances and Cluster Databases
Advanced Oracle Enterprise Manager Administration
You can install, configure, and monitor an Oracle Real Application Clusters (Oracle RAC) database from a single location using Oracle Enterprise Manager Cloud Control.
This section provides advanced administration tasks that are not covered in Monitoring and Tuning Oracle RAC Databases.
- Using Oracle Enterprise Manager Cloud Control to Discover Nodes and Instances
Discovering Oracle RAC database and instance targets in Oracle Enterprise Manager enables monitoring and administration. - Other Oracle Enterprise Manager Capabilities
Oracle Enterprise Manager provides a variety of administrative capabilities. - Administering Jobs and Alerts in Oracle RAC
You can use the Administration tab in Oracle Enterprise Manager for an Oracle RAC database.
Parent topic: Administering Database Instances and Cluster Databases
Using Oracle Enterprise Manager Cloud Control to Discover Nodes and Instances
Discovering Oracle RAC database and instance targets in Oracle Enterprise Manager enables monitoring and administration.
Oracle Enterprise Manager Cloud Control enables you to use the Oracle Enterprise Manager console interface to discover Oracle Real Application Clusters (Oracle RAC) database and instance targets.
If the Oracle Enterprise Manager Cloud Control agents are installed on a cluster that has an Oracle RAC database, then Oracle RAC database targets are discovered at install time. You can use the console interface to discover targets if a database is created after agents are installed or if a database is not automatically discovered at agent install time.
To discover nodes and instances, use Oracle Enterprise Manager Cloud Control as follows:
-
Log in to Oracle Enterprise Manager and click the Targets tab.
-
Click the Database tab to view all of the available targets. The column labeled Types shows the Oracle RAC databases using the entry Cluster Database.
-
Add the database target by selecting the target name, then clicking Add. The Add Database Target: Specify Host page appears, which enables you to add databases, listeners, and Oracle Automatic Storage Management (Oracle ASM) as monitored targets.
-
Click the flashlight icon to display the available host names, select a host, then click Continue. The Add Database: Specify Source page appears.
-
Either request Oracle Enterprise Managerr to discover only noncluster databases and listeners, or to discover all cluster databases, noncluster databases, and listeners on the cluster, then click Continue.
-
If this procedure did not discover your reconfigured cluster database and all of its instances, you can use the Targets Discovered on Cluster page to manually configure your cluster database and noncluster databases.
Parent topic: Advanced Oracle Enterprise Manager Administration
Other Oracle Enterprise Manager Capabilities
Oracle Enterprise Manager provides a variety of administrative capabilities.
-
The Oracle Grid Infrastructure/Oracle RAC Provisioning deployment procedure provisions Oracle RAC and Oracle Grid Infrastructure. This procedure also has a feature called Profiles, which enables you to record the inputs and subsequently use them for repeated deployments.
-
Dynamic prerequisites for the new procedures enable Oracle Enterprise Manager, when connected to My Oracle Support, to download the latest prerequisites and tools for Oracle RAC provisioning.
-
The existing One-Click Extend Cluster Database capability now supports Oracle RAC stack.
-
The existing Delete/Scale down Oracle Real Application Clusters capability is certified with Oracle RAC clusters.
-
The existing Oracle Database Provisioning procedure now supports provisioning of single instances of Oracle Database.
-
A new deployment procedure—Oracle Grid Infrastructure Provisioning for Standalone Servers—has been introduced to provision Oracle Grid Infrastructure for noncluster databases.
Parent topic: Advanced Oracle Enterprise Manager Administration
Administering Jobs and Alerts in Oracle RAC
You can use the Administration tab in Oracle Enterprise Manager for an Oracle RAC database.
The Cluster Database Home page shows all of the instances in the Oracle Real Application Clusters (Oracle RAC) database and provides an aggregate collection of several statistics specific to Oracle RAC that are collected by the Automatic Workload Repository (AWR) for server manageability.
You do not need to navigate to an instance-specific page to see these details. However, on the Cluster Database Home page, if an instance is down that should be operating, or if an instance has a high number of alerts, then you can drill down to the instance-specific page for each alert.
To perform specific administrative tasks as described in the remainder of this section, log in to the target Oracle RAC database, navigate to the Cluster Database Home page, and click the Administration tab.
- Administering Jobs in Oracle RAC
You can administer Oracle Enterprise Manager jobs at both the database and instance levels. - Administering Alerts in Oracle RAC with Oracle Enterprise Manager
You can use Oracle Enterprise Manager to configure Oracle RAC environment alerts. - Using Defined Blackouts in Oracle Enterprise Manager
You can define blackouts (which are time periods in which database monitoring is suspended so that maintenance operations do not skew monitoring data or generate needless alerts) for all managed targets of an Oracle Real Application Clusters (Oracle RAC) database.
Parent topic: Advanced Oracle Enterprise Manager Administration
Administering Jobs in Oracle RAC
You can administer Oracle Enterprise Manager jobs at both the database and instance levels.
For example, you can create a job at the cluster database level to run on any active instance of the target Oracle Real Application Clusters (Oracle RAC) database. Or you can create a job at the instance level to run on the specific instance for which you created it. If there is a failure, then recurring jobs can run on a surviving instance.
Because you can create jobs at the instance level, cluster level, or cluster database level, jobs can run on any available host in the cluster database. This applies to scheduled jobs as well. Oracle Enterprise Manager also displays job activity in several categories, including, Active
, History
, and Library
.
Use the Jobs tab to submit operating system scripts and SQL scripts and to examine scheduled jobs. For example, to create a backup job for a specific Oracle RAC database:
-
Click Targets and click the database for which you want to create the job.
-
Log in to the target database.
-
When Oracle Enterprise Manager displays the Database Home page, click Maintenance.
-
Complete the Enterprise Manage Job Wizard pages to create the job.
Parent topic: Administering Jobs and Alerts in Oracle RAC
Administering Alerts in Oracle RAC with Oracle Enterprise Manager
You can use Oracle Enterprise Manager to configure Oracle RAC environment alerts.
You can also configure special Oracle RAC database tests, such as global cache converts, consistent read requests, and so on.
Oracle Enterprise Manager distinguishes between database- and instance-level alerts in Oracle RAC environments. Alert thresholds for instance-level alerts, such as archive log alerts, can be set at the instance target level. This function enables you to receive alerts for the specific instance if performance exceeds your threshold. You can also configure alerts at the database level, such as setting alerts for tablespaces, to avoid receiving duplicate alerts at each instance.
Related Topics
See Also:
Oracle Technology Network for an example of configuring alerts in Oracle RAC, and Oracle Database PL/SQL Packages and Types Reference for information about using packages to configure thresholds
Parent topic: Administering Jobs and Alerts in Oracle RAC
Using Defined Blackouts in Oracle Enterprise Manager
You can define blackouts (which are time periods in which database monitoring is suspended so that maintenance operations do not skew monitoring data or generate needless alerts) for all managed targets of an Oracle Real Application Clusters (Oracle RAC) database.
Defining blackouts prevents alerts from occurring while performing maintenance. You can define blackouts for an entire cluster database or for specific cluster database instances.
Parent topic: Administering Jobs and Alerts in Oracle RAC