19 Managing Tables
Managing tables includes tasks such as creating tables, loading tables, altering tables, and dropping tables.
Live SQL:
To view and run examples related to the ones in this chapter on Oracle Live SQL, go to Oracle Live SQL: Creating and Modifying Tables.
- About Tables
Tables are the basic unit of data storage in an Oracle Database. Data is stored in rows and columns. - Guidelines for Managing Tables
Following guidelines can make the management of your tables easier and can improve performance when creating the table, as well as when loading, updating, and querying the table data. - Creating Tables
Create tables using the SQL statementCREATE TABLE
. - Loading Tables
There are several techniques for loading data into tables. - Optimizing the Performance of Bulk Updates
TheEXECUTE_UPDATE
procedure in theDBMS_REDEFINITION
package can optimize the performance of bulk updates to a table. Performance is optimized because the updates are not logged in the redo log. - Automatically Collecting Statistics on Tables
The PL/SQL packageDBMS_STATS
lets you generate and manage statistics for cost-based optimization. You can use this package to gather, modify, view, export, import, and delete statistics. You can also use this package to identify or name statistics that have been gathered. - Altering Tables
You alter a table using theALTER TABLE
statement. To alter a table, the table must be contained in your schema, or you must have either theALTER
object privilege for the table or theALTER ANY TABLE
system privilege. - Redefining Tables Online
You can modify the logical or physical structure of a table. - Researching and Reversing Erroneous Table Changes
To enable you to research and reverse erroneous changes to tables, Oracle Database provides a group of features that you can use to view past states of database objects or to return database objects to a previous state without using point-in-time media recovery. These features are known as Oracle Flashback features. - Recovering Tables Using Oracle Flashback Table
Oracle Flashback Table enables you to restore a table to its state as of a previous point in time. - Dropping Tables
To drop a table that you no longer need, use theDROP TABLE
statement. - Using Flashback Drop and Managing the Recycle Bin
When you drop a table, the database does not immediately remove the space associated with the table. The database renames the table and places it and any associated objects in a recycle bin, where, in case the table was dropped in error, it can be recovered at a later time. This feature is called Flashback Drop, and theFLASHBACK
TABLE
statement is used to restore the table. - Managing Index-Organized Tables
An index-organized table's storage organization is a variant of a primary B-tree index. Unlike a heap-organized table, data is stored in primary key order. - Managing Partitioned Tables
Partitioned tables enable your data to be broken down into smaller, more manageable pieces called partitions, or even subpartitions. Each partition can have separate physical attributes, such as compression enabled or disabled, type of compression, physical storage settings, and tablespace, thus providing a structure that can be better tuned for availability and performance. In addition, each partition can be managed individually, which can simplify and reduce the time required for backup and administration. - Managing External Tables
External tables are the tables that do not reside in the database. They reside outside the database, in Object storage or external files, such as operating system files or Hadoop Distributed File System (HDFS) files. - Managing Hybrid Partitioned Tables
A hybrid partitioned table is a partitioned table in which some partitions reside in the database and some partitions reside outside the database in external files, such as operating system files or Hadoop Distributed File System (HDFS) files. - Managing Immutable Tables
Immutable tables provide protection against unauthorized data modification. - Managing Blockchain Tables
Blockchain tables protect data that records important actions, assets, entities, and documents from unauthorized modification or deletion by criminals, hackers, and fraud. Blockchain tables prevent unauthorized changes made using the database and detect unauthorized changes that bypass the database. - Tables Data Dictionary Views
You can query a set of data dictionary views for information about tables.
Parent topic: Schema Objects
19.1 About Tables
Tables are the basic unit of data storage in an Oracle Database. Data is stored in rows and columns.
You define a table with a table name, such as employees
, and a set of columns. You give each column a column name, such as employee_id
, last_name
, and job_id
; a data type, such as VARCHAR2
, DATE
, or NUMBER
; and a width. The width can be predetermined by the data type, as in DATE
. If columns are of the NUMBER
data type, define precision and scale instead of width. A row is a collection of column information corresponding to a single record.
You can specify rules for each column of a table. These rules are called integrity constraints. One example is a NOT NULL
integrity constraint. This constraint forces the column to contain a value in every row.
You can invoke Transparent Data Encryption to encrypt data before storing it. If users attempt to circumvent the database access control mechanisms by looking inside Oracle data files directly with operating system tools, encryption prevents these users from viewing sensitive data.
Tables can also include virtual columns. A virtual column is like any other table column, except that its value is derived by evaluating an expression. The expression can include columns from the same table, constants, SQL functions, and user-defined PL/SQL functions. You cannot explicitly write to a virtual column.
Some column types, such as LOB
s, varrays, and nested tables, are stored in their own segments. LOB
s and varrays are stored in LOB
segments, while nested tables are stored in storage tables. You can specify a STORAGE
clause for these segments that will override storage parameters specified at the table level.
After you create a table, you insert rows of data using SQL statements or using an Oracle bulk load utility. Table data can then be queried, deleted, or updated using SQL.
See Also:
-
Oracle Database Concepts for an overview of tables
-
Oracle Database SQL Language Reference for descriptions of Oracle Database data types
-
Managing Space for Schema Objects for guidelines for managing space for tables
-
Managing Schema Objects for information on additional aspects of managing tables, such as specifying integrity constraints and analyzing tables
-
Oracle Database Transparent Data Encryption Guide for a discussion of Transparent Data Encryption
Parent topic: Managing Tables
19.2 Guidelines for Managing Tables
Following guidelines can make the management of your tables easier and can improve performance when creating the table, as well as when loading, updating, and querying the table data.
- Design Tables Before Creating Them
Usually, the application developer is responsible for designing the elements of an application, including the tables. Database administrators are responsible for establishing the attributes of the underlying tablespace that will hold the application tables. - Specify the Type of Table to Create
You can create different types of tables with Oracle Database. - Specify the Location of Each Table
It is advisable to specify theTABLESPACE
clause in aCREATE TABLE
statement to identify the tablespace that is to store the new table. For partitioned tables, you can optionally identify the tablespace that is to store each partition. - Consider Parallelizing Table Creation
You can use parallel execution when creating tables using a subquery (AS SELECT
) in theCREATE TABLE
statement. Because multiple processes work together to create the table, performance of the table creation operation is improved. - Consider Using NOLOGGING When Creating Tables
To create a table most efficiently use theNOLOGGING
clause in theCREATE TABLE...AS SELECT
statement. TheNOLOGGING
clause causes minimal redo information to be generated during the table creation. - Consider Using Table Compression
As your database grows in size, consider using table compression to save space and improve performance. - Managing Table Compression Using Enterprise Manager Cloud Control
You can manage table compression with Oracle Enterprise Manager Cloud Control. - Consider Using Segment-Level and Row-Level Compression Tiering
Segment-level compression tiering enables you to specify compression at the segment level within a table. Row-level compression tiering enables you to specify compression at the row level within a table. You can use a combination of these on the same table for fine-grained control over how the data in the table is stored and managed. - Consider Using Attribute-Clustered Tables
An attribute-clustered table is a heap-organized table that stores data in close proximity on disk based on user-specified clustering directives. - Consider Using Zone Maps
A zone is a set of contiguous data blocks on disk. A zone map tracks the minimum and maximum of specified columns for all individual zones. - Consider Storing Tables in the In-Memory Column Store
The In-Memory Column Store is an optional portion of the system global area (SGA) that stores copies of tables, table partitions, and other database objects that is optimized for rapid scans. In the In-Memory Column Store, table data is stored by column rather than row in the SGA. - Consider Using Invisible Columns
You can use invisible column to make changes to a table without disrupting applications that use the table. - Consider Encrypting Columns That Contain Sensitive Data
You can encrypt individual table columns that contain sensitive data. Examples of sensitive data include social security numbers, credit card numbers, and medical records. Column encryption is transparent to your applications, with some restrictions. - Understand Deferred Segment Creation
When you create heap-organized tables in a locally managed tablespace, the database defers table segment creation until the first row is inserted. - Materializing Segments
TheDBMS_SPACE_ADMIN
package includes theMATERIALIZE_DEFERRED_SEGMENTS()
procedure, which enables you to materialize segments for tables, table partitions, and dependent objects created with deferred segment creation enabled. - Estimate Table Size and Plan Accordingly
Estimate the sizes of tables before creating them. Preferably, do this as part of database planning. Knowing the sizes, and uses, for database tables is an important part of database planning. - Restrictions to Consider When Creating Tables
There are restrictions to consider when you create tables.
Parent topic: Managing Tables
19.2.1 Design Tables Before Creating Them
Usually, the application developer is responsible for designing the elements of an application, including the tables. Database administrators are responsible for establishing the attributes of the underlying tablespace that will hold the application tables.
Either the DBA or the applications developer, or both working jointly, can be responsible for the actual creation of the tables, depending upon the practices for a site. Working with the application developer, consider the following guidelines when designing tables:
-
Use descriptive names for tables, columns, indexes, and clusters.
-
Be consistent in abbreviations and in the use of singular and plural forms of table names and columns.
-
Document the meaning of each table and its columns with the
COMMENT
command. -
Normalize each table.
-
Select the appropriate data type for each column.
-
Consider whether your applications would benefit from adding one or more virtual columns to some tables.
-
Define columns that allow nulls last, to conserve storage space.
-
Cluster tables whenever appropriate, to conserve storage space and optimize performance of SQL statements.
Before creating a table, you should also determine whether to use integrity constraints. Integrity constraints can be defined on the columns of a table to enforce the business rules of your database automatically.
Parent topic: Guidelines for Managing Tables
19.2.2 Specify the Type of Table to Create
You can create different types of tables with Oracle Database.
Here are the types of tables that you can create:
Type of Table | Description |
---|---|
Ordinary (heap-organized) table |
This is the basic, general purpose type of table which is the primary subject of this chapter. Its data is stored as an unordered collection (heap). |
Clustered table |
A clustered table is a table that is part of a cluster. A cluster is a group of tables that share the same data blocks because they share common columns and are often used together. Clusters and clustered tables are discussed in Managing Clusters. |
Index-organized table |
Unlike an ordinary (heap-organized) table, data for an index-organized table is stored in a B-tree index structure in a primary key sorted manner. Besides storing the primary key column values of an index-organized table row, each index entry in the B-tree stores the nonkey column values as well. Index-organized tables are discussed in "Managing Index-Organized Tables ". |
Partitioned table |
Partitioned tables enable your data to be broken down into smaller, more manageable pieces called partitions, or even subpartitions. Each partition can have separate physical attributes, such as compression enabled or disabled, type of compression, physical storage settings, and tablespace, thus providing a structure that can be better tuned for availability and performance. In addition, each partition can be managed individually, which can simplify and reduce the time required for backup and administration. Partitioned tables are discussed in Oracle Database VLDB and Partitioning Guide. |
External table |
An external table is a table that does not reside in the database, but resides outside the database in external files, such as operating system files or Hadoop Distributed File System (HDFS) files. External tables are discussed in Managing External Tables. |
Hybrid partitioned table |
A hybrid partitioned table is a partitioned table in which some partitions reside in the database and some partitions reside outside the database in external files, such as operating system files or Hadoop Distributed File System (HDFS) files. Hybrid partitioned tables are discussed in Oracle Database VLDB and Partitioning Guide. |
Parent topic: Guidelines for Managing Tables
19.2.3 Specify the Location of Each Table
It is advisable to specify the TABLESPACE
clause in a CREATE TABLE
statement to identify the tablespace that is to store the new table. For partitioned tables, you can optionally identify the tablespace that is to store each partition.
Ensure that you have the appropriate privileges and quota on any tablespaces that you use. If you do not specify a tablespace in a CREATE TABLE
statement, the table is created in your default tablespace.
When specifying the tablespace to contain a new table, ensure that you understand implications of your selection. By properly specifying a tablespace during the creation of each table, you can increase the performance of the database system and decrease the time needed for database administration.
The following situations illustrate how not specifying a tablespace, or specifying an inappropriate one, can affect performance:
-
If users' objects are created in the
SYSTEM
tablespace, the performance of the database can suffer, since both data dictionary objects and user objects must contend for the same data files. Users' objects should not be stored in theSYSTEM
tablespace. To avoid this, ensure that all users are assigned default tablespaces when they are created in the database. -
If application-associated tables are arbitrarily stored in various tablespaces, the time necessary to complete administrative operations (such as backup and recovery) for the data of that application can be increased.
Parent topic: Guidelines for Managing Tables
19.2.4 Consider Parallelizing Table Creation
You can use parallel execution when creating tables using a subquery (AS SELECT
) in the CREATE TABLE
statement. Because multiple processes work together to create the table, performance of the table creation operation is improved.
Parallelizing table creation is discussed in the section "Parallelizing Table Creation".
Parent topic: Guidelines for Managing Tables
19.2.5 Consider Using NOLOGGING When Creating Tables
To create a table most efficiently use the NOLOGGING
clause in the CREATE TABLE...AS SELECT
statement. The NOLOGGING
clause causes minimal redo information to be generated during the table creation.
Using the NOLOGGING
clause has the following benefits:
-
Space is saved in the redo log files.
-
The time it takes to create the table is decreased.
-
Performance improves for parallel creation of large tables.
The NOLOGGING
clause also specifies that subsequent direct loads using SQL*Loader and direct load INSERT
operations are not logged. Subsequent DML statements (UPDATE
, DELETE
, and conventional path insert) are unaffected by the NOLOGGING
attribute of the table and generate redo.
If you cannot afford to lose the table after you have created it (for example, you will no longer have access to the data used to create the table) you should take a backup immediately after the table is created. In some situations, such as for tables that are created for temporary use, this precaution may not be necessary.
In general, the relative performance improvement of specifying NOLOGGING
is greater for larger tables than for smaller tables. For small tables, NOLOGGING
has little effect on the time it takes to create a table. However, for larger tables the performance improvement can be significant, especially when also parallelizing the table creation.
Parent topic: Guidelines for Managing Tables
19.2.6 Consider Using Table Compression
As your database grows in size, consider using table compression to save space and improve performance.
- About Table Compression
Compression saves disk space, reduces memory use in the database buffer cache, and can significantly speed query execution during reads. - Examples Related to Table Compression
Examples illustrate using table compression. - Compression and Partitioned Tables
A table can have both compressed and uncompressed partitions, and different partitions can use different compression methods. If the compression settings for a table and one of its partitions do not match, then the partition setting has precedence for the partition. - Determining If a Table Is Compressed
In the*_TABLES
data dictionary views, compressed tables haveENABLED
in theCOMPRESSION
column. - Determining Which Rows Are Compressed
To determine the compression level of a row, use theGET_COMPRESSION_TYPE
function in theDBMS_COMPRESSION
package. - Changing the Compression Level
You can change the compression level for a partition, table, or tablespace. - Adding and Dropping Columns in Compressed Tables
Some restrictions apply when adding columns to a compressed table or dropping columns from a compressed table. - Exporting and Importing Hybrid Columnar Compression Tables
Hybrid Columnar Compression tables can be imported using theimpdp
command of the Data Pump Import utility. - Restoring a Hybrid Columnar Compression Table
There may be times when a Hybrid Columnar Compression table must be restored from a backup. The table can be restored to a system that supports Hybrid Columnar Compression, or to a system that does not support Hybrid Columnar Compression. - Notes and Restrictions for Compressed Tables
Consider notes and restrictions related to compressed tables. - Packing Compressed Tables
If you use conventional DML on a table compressed with basic table compression or Hybrid Columnar Compression, then all inserted and updated rows are stored uncompressed or in a less-compressed format. To "pack" the compressed table so that these rows are compressed, use anALTER
TABLE
MOVE
statement.
Parent topic: Guidelines for Managing Tables
19.2.6.1 About Table Compression
Compression saves disk space, reduces memory use in the database buffer cache, and can significantly speed query execution during reads.
Compression has a cost in CPU overhead for data loading and DML. However, this cost is offset by reduced I/O requirements. Because compressed table data stays compressed in memory, compression can also improve performance for DML operations, as more rows can fit in the database buffer cache (and flash cache if it is enabled).
Table compression is completely transparent to applications. It is useful in decision support systems (DSS), online transaction processing (OLTP) systems, and archival systems.
You can specify compression for a tablespace, a table, or a partition. If specified at the tablespace level, then all tables created in that tablespace are compressed by default.
Oracle Database supports several methods of table compression. They are summarized in Table 19-1.
Table 19-1 Table Compression Methods
Table Compression Method | Compression Level | CPU Overhead | Applications | Notes |
---|---|---|---|---|
Basic table compression |
High |
Minimal |
DSS |
None. |
Advanced row compression |
High |
Minimal |
OLTP, DSS |
None. |
Warehouse compression (Hybrid Columnar Compression) |
Higher |
Higher |
DSS |
The compression level and CPU overhead depend on compression level specified (LOW or HIGH). |
Archive compression (Hybrid Columnar Compression) |
Highest |
Highest |
Archiving |
The compression level and CPU overhead depend on compression level specified (LOW or HIGH). |
When you use basic table compression, warehouse compression, or archive compression, compression only occurs when data is bulk loaded or array inserted into a table.
Basic table compression supports limited data types and SQL operations.
Advanced row compression is intended for OLTP applications and compresses data manipulated by any SQL operation. When you use advanced row compression, compression occurs while data is being inserted, updated, or bulk loaded into a table. Operations that permit advanced row compression include:
-
Single-row inserts and updates
Inserts and updates are not compressed immediately. When updating an already compressed block, any columns that are not updated usually remain compressed. Updated columns are stored in an uncompressed format similar to any uncompressed block. The updated values are re-compressed when the block reaches a database-controlled threshold. Inserted data is also compressed when the data in the block reaches a database-controlled threshold.
-
Array inserts
Array inserts include
INSERT INTO SELECT
SQL statements without theAPPEND
hint, and array inserts from programmatic interfaces such as PL/SQL and the Oracle Call Interface (OCI). -
The following direct-path
INSERT
methods:-
Direct path SQL*Loader
-
CREATE
TABLE
AS
SELECT
statements -
Parallel
INSERT
statements -
INSERT
statements with anAPPEND
orAPPEND_VALUES
hint
Inserts performed with these direct-path
INSERT
methods are compressed immediately. -
Warehouse compression and archive compression achieve the highest compression levels because they use Hybrid Columnar Compression technology. Hybrid Columnar Compression technology uses a modified form of columnar storage instead of row-major storage. This enables the database to store similar data together, which improves the effectiveness of compression algorithms. For data that is updated, Hybrid Columnar Compression uses more CPU and moves the updated rows to row format so that future updates are faster. Because of this optimization, you should use it only for data that is updated infrequently.
The higher compression levels of Hybrid Columnar Compression are achieved only with data that is direct-path inserted or array inserted. Conventional inserts and updates are supported, but cause rows to be moved from columnar to row format, and reduce the compression level. You can use Automatic Data Optimization (ADO) policies to move these rows back to the desired level of Hybrid Columnar Compression automatically.
With Hybrid Columnar Compression (warehouse and archive), for array inserts to be compressed immediately, the following conditions must be met:
-
The table must be stored in a locally managed tablespace with Automatic Segment Space Management (ASSM) enabled.
-
The database compatibility level must be at 12.2.0 or higher.
Regardless of the compression method, DELETE
operations on a compressed block are identical to DELETE
operations on a non-compressed block. Any space obtained on a data block, caused by SQL DELETE
operations, is reused by subsequent SQL INSERT
operations. With Hybrid Columnar Compression technology, when all the rows in a compression unit are deleted, the space in the compression unit is available for reuse.
Table 19-2 lists characteristics of each table compression method.
Table 19-2 Table Compression Characteristics
Table Compression Method | CREATE/ALTER TABLE Syntax | Direct-Path or Array Inserts | Notes |
---|---|---|---|
Basic table compression |
|
Rows are compressed with basic table compression. |
Rows inserted without using direct-path or array insert and updated rows are uncompressed. |
Advanced row compression |
|
Rows are compressed with advanced row compression. |
Rows inserted with or without using direct-path or array insert and updated rows are compressed using advanced row compression. |
Warehouse compression (Hybrid Columnar Compression) |
|
Rows are compressed with warehouse compression. |
This compression method can result in high CPU overhead. Updated rows and rows inserted without using direct-path or array insert are stored in row format instead of column format, and thus have a lower compression level. |
Archive compression (Hybrid Columnar Compression) |
|
Rows are compressed with archive compression. |
This compression method can result in high CPU overhead. Updated rows and rows inserted without using direct-path or array insert are stored in row format instead of column format, and thus have a lower compression level. |
You specify table compression with the COMPRESS
clause of the CREATE
TABLE
statement. You can enable compression for an existing table by using these clauses in an ALTER
TABLE
statement. In this case, only data that is inserted or updated after compression is enabled is compressed. Using the ALTER
TABLE
MOVE
statement also enables compression for data that is inserted and updated, but it compresses existing data as well. Similarly, you can disable table compression for an existing compressed table with the ALTER
TABLE
...NOCOMPRESS
statement. In this case, all data that was already compressed remains compressed, and new data is inserted uncompressed.
The COLUMN STORE COMPRESS FOR QUERY HIGH
option is the default data warehouse compression mode. It provides good compression and performance when using Hybrid Columnar Compression on Exadata storage. The COLUMN STORE COMPRESS FOR QUERY LOW
option should be used in environments where load performance is critical. It loads faster than data compressed with the COLUMN STORE COMPRESS FOR QUERY HIGH
option.
The COLUMN STORE COMPRESS FOR ARCHIVE LOW
option is the default archive compression mode. It provides a high compression level and is ideal for infrequently-accessed data. The COLUMN STORE COMPRESS FOR ARCHIVE HIGH
option should be used for data that is rarely accessed.
A compression advisor, provided by the DBMS_COMPRESSION
package, helps you determine the expected compression level for a particular table with a particular compression method.
Note:
Hybrid Columnar Compression is dependent on the underlying storage system. See Oracle Database Licensing Information for more information.
See Also:
-
Oracle Database Concepts for an overview of table compression
Parent topic: Consider Using Table Compression
19.2.6.2 Examples Related to Table Compression
Examples illustrate using table compression.
Example 19-1 Creating a Table with Advanced Row Compression
The following example enables advanced row compression on the table orders
:
CREATE TABLE orders ... ROW STORE COMPRESS ADVANCED;
Data for the orders
table is compressed during direct-path INSERT
, array insert, and conventional DML.
Example 19-2 Creating a Table with Basic Table Compression
The following statements, which are equivalent, enable basic table compression on the sales_history
table, which is a fact table in a data warehouse:
CREATE TABLE sales_history ... ROW STORE COMPRESS BASIC; CREATE TABLE sales_history ... ROW STORE COMPRESS;
Frequent queries are run against this table, but no DML is expected.
Example 19-3 Using Direct-Path Insert to Insert Rows Into a Table
This example demonstrates using the APPEND
hint to insert rows into the sales_history
table using direct-path INSERT
.
INSERT /*+ APPEND */ INTO sales_history SELECT * FROM sales WHERE cust_id=8890; COMMIT;
Example 19-4 Using an Array Insert to Insert Rows Into a Table
This example demonstrates using an array insert in SQL to insert rows into the sales_history
table.
INSERT INTO sales_history SELECT * FROM sales WHERE cust_id=8890; COMMIT;
This example demonstrates using an array insert in PL/SQL to insert rows into the hr.jobs_test
table.
DECLARE TYPE table_def IS TABLE OF hr.jobs%ROWTYPE; array table_def := table_def(); BEGIN SELECT * BULK COLLECT INTO array FROM hr.jobs; FORALL i in array.first .. array.last INSERT INTO hr.jobs_test VALUES array(i); COMMIT; END; /
Note:
With Hybrid Columnar Compression (warehouse and archive), for array inserts performed in SQL, PL/SQL, or OCI to be compressed immediately, the table must be stored in a locally managed tablespace with Automatic Segment Space Management (ASSM) enabled, and the database compatibility level must be at 12.2.0 or higher.
Example 19-5 Creating a Table with Warehouse Compression
This example enables Hybrid Columnar Compression on the table sales_history
:
CREATE TABLE sales_history ... COLUMN STORE COMPRESS FOR QUERY;
The table is created with the default COLUMN STORE COMPRESS FOR QUERY HIGH
option. This option provides a higher level of compression than basic table compression or advanced row compression. It works well when frequent queries are run against this table and no DML is expected.
Example 19-6 Creating a Table with Archive Compression
The following example enables Hybrid Columnar Compression on the table sales_history
:
CREATE TABLE sales_history ... COLUMN STORE COMPRESS FOR ARCHIVE;
The table is created with the default COLUMN STORE COMPRESS FOR ARCHIVE LOW
option. This option provides a higher level of compression than basic, advanced row, or warehouse compression. It works well when load performance is critical and data is accessed infrequently. The default COLUMN STORE COMPRESS FOR ARCHIVE LOW
option provides a lower level of compression than the COLUMN STORE COMPRESS FOR ARCHIVE HIGH
option.
Parent topic: Consider Using Table Compression
19.2.6.3 Compression and Partitioned Tables
A table can have both compressed and uncompressed partitions, and different partitions can use different compression methods. If the compression settings for a table and one of its partitions do not match, then the partition setting has precedence for the partition.
To change the compression method for a partition, do one of the following:
-
To change the compression method for new data only, use
ALTER
TABLE
...MODIFY
PARTITION
...COMPRESS
... -
To change the compression method for both new and existing data, use either
ALTER
TABLE
...MOVE
PARTITION
...COMPRESS
... or online table redefinition.
When you execute these statements, specify the compression method. For example, run the following statement to change the compression method to advanced row compression for both new and existing data:
ALTER TABLE ... MOVE PARTITION ... ROW STORE COMPRESS ADVANCED...
Parent topic: Consider Using Table Compression
19.2.6.4 Determining If a Table Is Compressed
In the *_TABLES
data dictionary views, compressed tables have ENABLED
in the COMPRESSION
column.
For partitioned tables, this column is null, and the COMPRESSION
column of the *_TAB_PARTITIONS
views indicates the partitions that are compressed. In addition, the COMPRESS_FOR
column indicates the compression method in use for the table or partition.
SQL> SELECT table_name, compression, compress_for FROM user_tables; TABLE_NAME COMPRESSION COMPRESS_FOR ---------------- ------------ ----------------- T1 DISABLED T2 ENABLED BASIC T3 ENABLED ADVANCED T4 ENABLED QUERY HIGH T5 ENABLED ARCHIVE LOW
SQL> SELECT table_name, partition_name, compression, compress_for FROM user_tab_partitions; TABLE_NAME PARTITION_NAME COMPRESSION COMPRESS_FOR ----------- ---------------- ----------- ------------------------------ SALES Q4_2004 ENABLED ARCHIVE HIGH ... SALES Q3_2008 ENABLED QUERY HIGH SALES Q4_2008 ENABLED QUERY HIGH SALES Q1_2009 ENABLED ADVANCED SALES Q2_2009 ENABLED ADVANCED
Parent topic: Consider Using Table Compression
19.2.6.5 Determining Which Rows Are Compressed
To determine the compression level of a row, use the GET_COMPRESSION_TYPE
function in the DBMS_COMPRESSION
package.
For example, the following query returns the compression type for a row in the hr.employees
table:
SELECT DECODE(DBMS_COMPRESSION.GET_COMPRESSION_TYPE( ownname => 'HR', tabname => 'EMPLOYEES', subobjname => '', row_id => 'AAAVEIAAGAAAABTAAD'), 1, 'No Compression', 2, 'Advanced Row Compression', 4, 'Hybrid Columnar Compression for Query High', 8, 'Hybrid Columnar Compression for Query Low', 16, 'Hybrid Columnar Compression for Archive High', 32, 'Hybrid Columnar Compression for Archive Low', 4096, 'Basic Table Compression', 'Unknown Compression Type') compression_type FROM DUAL;
See Also:
Oracle Database PL/SQL Packages and Types Reference for additional information about GET_COMPRESSION_TYPE
Parent topic: Consider Using Table Compression
19.2.6.6 Changing the Compression Level
You can change the compression level for a partition, table, or tablespace.
For example, suppose a company uses warehouse compression for its sales data, but sales data older than six months is rarely accessed. If the sales data is stored in a table that is partitioned based on the age of the data, then the compression level for the older data can be changed to archive compression to free disk space.
To change the compression level for a partition or subpartition, you can use the following statements:
-
ALTER
TABLE
...
MOVE
PARTITION
...
ONLINE
-
ALTER
TABLE
...
MOVE
SUBPARTITION
...
ONLINE
These two statements support the ONLINE
keyword, which enables DML operations to run uninterrupted on the partition or subpartition that is being moved. These statements also automatically keep all the indexes updated while the partition or subpartition is being moved. You can also use the ALTER TABLE...MODIFY PARTITION
statement or online redefinition to change the compression level for a partition.
If a table is not partitioned, then you can use the ALTER TABLE...MOVE...COMPRESS FOR...
statement to change the compression level. The ALTER TABLE...MOVE
statement does not permit DML statements against the table while the command is running. However, you can also use online redefinition to compress a table, which keeps the table available for queries and DML statements during the redefinition.
To change the compression level for a tablespace, use the ALTER TABLESPACE
statement.
See Also:
-
"Moving a Table to a New Segment or Tablespace" for additional information about the
ALTER TABLE
command -
Oracle Database PL/SQL Packages and Types Reference for additional information about the
DBMS_REDEFINITION
package
Parent topic: Consider Using Table Compression
19.2.6.7 Adding and Dropping Columns in Compressed Tables
Some restrictions apply when adding columns to a compressed table or dropping columns from a compressed table.
The following restrictions apply when adding columns to compressed tables:
-
Advanced row compression, warehouse compression, and archive compression: If a default value is specified for an added column and the table is already populated, then the conditions for optimized add column behavior must be met. These conditions are described in Oracle Database SQL Language Reference.
The following restrictions apply when dropping columns in compressed tables:
-
Basic table compression: Dropping a column is not supported.
-
Advanced row compression, warehouse compression, and archive compression:
DROP
COLUMN
is supported, but internally the database sets the columnUNUSED
to avoid long-running decompression and recompression operations.
Parent topic: Consider Using Table Compression
19.2.6.8 Exporting and Importing Hybrid Columnar Compression Tables
Hybrid Columnar Compression tables can be imported using the impdp
command of the Data Pump Import utility.
By default, the impdp
command preserves the table properties, and the imported table is a Hybrid Columnar Compression table. On tablespaces not supporting Hybrid Columnar Compression, the impdp
command fails with an error. The tables can also be exported using the expdp
command.
You can import the Hybrid Columnar Compression table as an uncompressed table using the TRANSFORM=SEGMENT_ATTRIBUTES:n
option clause of the impdp
command.
An uncompressed or advanced row-compressed table can be converted to Hybrid Columnar Compression format during import. To convert a non-Hybrid Columnar Compression table to a Hybrid Columnar Compression table, do the following:
- Specify default compression for the tablespace using the
ALTER TABLESPACE ... SET DEFAULT COMPRESS
command. - Override the
SEGMENT_ATTRIBUTES
option of the imported table during import.
See Also:
-
Oracle Database Utilities for additional information about the Data Pump Import utility
-
Oracle Database SQL Language Reference for additional information about the
ALTER TABLESPACE
command
Parent topic: Consider Using Table Compression
19.2.6.9 Restoring a Hybrid Columnar Compression Table
There may be times when a Hybrid Columnar Compression table must be restored from a backup. The table can be restored to a system that supports Hybrid Columnar Compression, or to a system that does not support Hybrid Columnar Compression.
When restoring a table with Hybrid Columnar Compression to a system that supports Hybrid Columnar Compression, restore the file using Oracle Recovery Manager (RMAN) as usual.
When a Hybrid Columnar Compression table is restored to a system that does not support Hybrid Columnar Compression, you must convert the table from Hybrid Columnar Compression to advanced row compression or an uncompressed format. To restore the table, do the following:
See Also:
-
Oracle Database Backup and Recovery User's Guide for additional information about RMAN
-
Oracle Database SQL Language Reference for additional information about the
ALTER TABLE
command
Parent topic: Consider Using Table Compression
19.2.6.10 Notes and Restrictions for Compressed Tables
Consider notes and restrictions related to compressed tables.
The following are notes and restrictions related to compressed tables:
-
Advanced row compression, warehouse compression, and archive compression are not supported for the following types of tables:
-
Index-organized tables
-
External tables
-
Tables with
LONG
orLONG RAW
columns -
Temporary tables
-
Tables with
ROWDEPENDENCIES
enabled -
Clustered tables
-
-
Online segment shrink is not supported for tables compressed with the following compression methods:
-
Basic table compression using
ROW STORE COMPRESS BASIC
-
Warehouse compression using
COLUMN STORE COMPRESS FOR QUERY
-
Archive compression using
COLUMN STORE COMPRESS FOR ARCHIVE
-
-
The table compression methods described in this section do not apply to SecureFiles large objects (LOBs). SecureFiles LOBs have their own compression methods. See Oracle Database SecureFiles and Large Objects Developer's Guide for more information.
-
Compression technology uses CPU. Ensure that you have enough available CPU to handle the additional load.
-
Tables created with basic table compression have the
PCT_FREE
parameter automatically set to0
unless you specify otherwise.
Parent topic: Consider Using Table Compression
19.2.6.11 Packing Compressed Tables
If you use conventional DML on a table compressed with basic table compression or Hybrid Columnar Compression, then all inserted and updated rows are stored uncompressed or in a less-compressed format. To "pack" the compressed table so that these rows are compressed, use an ALTER
TABLE
MOVE
statement.
This operation takes an exclusive lock on the table, and therefore prevents any updates and loads until it completes. If this is not acceptable, then you can use online table redefinition.
When you move a partition or subpartition, you can use the ALTER
TABLE
MOVE
statement to compress the partition or subpartition while still allowing DML operations to run interrupted on the partition or subpartition that is being moved.
See Also:
-
Oracle Database SQL Language Reference for more details on the
ALTER
TABLE
...COMPRESS
andALTER
TABLE
...MOVE
statements, including restrictions -
Oracle Database VLDB and Partitioning Guide for more information on table partitioning
-
"Moving a Table to a New Segment or Tablespace" for more information about moving a table, partition, or subpartition
Parent topic: Consider Using Table Compression
19.2.7 Managing Table Compression Using Enterprise Manager Cloud Control
You can manage table compression with Oracle Enterprise Manager Cloud Control.
- Table Compression and Enterprise Manager Cloud Control
Enterprise Manager displays several central compression pages that summarize the compression features at the database and tablespace levels and contains links to different compression pages. The Compression pages display summaries of the compressed storage space at the database level and the tablespace level. - Viewing the Compression Summary at the Database Level
You can view the Compression Summary information at the database level. - Viewing the Compression Summary at the Tablespace Level
You can view the Compression Summary information at the tablespace level. - Estimating the Compression Ratio
You can run the Compression Advisor to calculate the compression ratio for a specific object. - Compressing an Object
You can compress an object such as a table. - Viewing Compression Advice
You can view compression advice from the Segment Advisor and take actions based on them. - Initiating Automatic Data Optimization on an Object
You can initiate Automatic Data Optimization on an object.
Parent topic: Guidelines for Managing Tables
19.2.7.1 Table Compression and Enterprise Manager Cloud Control
Enterprise Manager displays several central compression pages that summarize the compression features at the database and tablespace levels and contains links to different compression pages. The Compression pages display summaries of the compressed storage space at the database level and the tablespace level.
On the database level, the Compression Summary for Database page shows the total database size (total size of all the objects, both compressed and uncompressed), the total size of compressed objects in the database, the total size of uncompressed objects in the database and the ratio of the total size of compressed objects to the total database size. This provides you with a general idea on how much storage space within a database is compressed. You can then take action based on the information displayed.
Likewise on the tablespace level, the Compression Summary for Tablespace page shows the total tablespace size (total size of all the objects, both compressed and uncompressed), the total size of compressed objects in the tablespace, the total size of uncompressed objects in the tablespace and the ratio of the total size of compressed objects to the total tablespace size.
You can use the Compression feature to perform the following tasks:
-
View a summary of the compressed storage space for the top 100 tablespaces at the database level or the top 100 objects at the tablespace level. You can view a summary on how much storage space is compressed within each of top 100 tablespaces that use the most database storage, including the total size of the tablespace, the compressed size of a tablespace, the uncompressed size of tablespace, and the percentage of compressed storage within a tablespace. You can then perform compression tasks based on the information displayed.
-
View the storage size that is compressed by each compression type for four object types: Table, Index, LOB (Large Objects), and DBFS (Oracle Database File System).
-
Calculate the compression ratio for a specific object.
-
Compress an object (tablespace, table, partition or LOB). This allows you to save storage space. You can run the Compression Advisor to ascertain how much space can be saved and then perform the compression action on the object.
-
View compression advice from the Segment Advisor. You can access a link to the Segment Advisor to compress segments.
19.2.7.2 Viewing the Compression Summary at the Database Level
You can view the Compression Summary information at the database level.
19.2.7.3 Viewing the Compression Summary at the Tablespace Level
You can view the Compression Summary information at the tablespace level.
19.2.7.4 Estimating the Compression Ratio
You can run the Compression Advisor to calculate the compression ratio for a specific object.
The job runs either immediately or is scheduled, and you are returned to the Compression Summary for Top 100 Objects in Tablespace page.
19.2.7.6 Viewing Compression Advice
You can view compression advice from the Segment Advisor and take actions based on them.
19.2.8 Consider Using Segment-Level and Row-Level Compression Tiering
Segment-level compression tiering enables you to specify compression at the segment level within a table. Row-level compression tiering enables you to specify compression at the row level within a table. You can use a combination of these on the same table for fine-grained control over how the data in the table is stored and managed.
As user modifications to segments and rows change over time, it is often beneficial to change the compression level for them. For example, some segments and rows might be modified often for a short period of time after they are added to the database, but modifications might become less frequent over time.
You can use compression tiering to specify which segments and rows are compressed based on rules. For example, you can specify that rows that have not been modified in two weeks are compressed with advanced row compression. You can also specify that segments that have not been modified in six months are compressed with warehouse compression.
The following prerequisites must be met before you can use segment-level and row-level compression tiering:
-
The
HEAT_MAP
initialization parameter must be set toON
. -
The
COMPATIBLE
initialization parameter must be set to12.0.0
or higher.
To use segment-level compression tiering or row-level compression tiering, execute one of the following SQL statements and include an Automatic Data Optimization (ADO) policy that specifies the rules:
-
CREATE
TABLE
-
ALTER
TABLE
Example 19-7 Row-Level Compression Tiering
This example specifies row-level compression tiering for the oe.orders
table. Oracle Database compresses rows using warehouse (QUERY
) compression after 14 days with no modifications.
ALTER TABLE oe.orders ILM ADD POLICY COLUMN STORE COMPRESS FOR QUERY ROW AFTER 14 DAYS OF NO MODIFICATION;
Example 19-8 Segment-Level Compression Tiering
This example specifies segment-level compression tiering for the oe.order_items
table. Oracle Database compresses segments using archive (ARCHIVE
HIGH
) compression after six months with no modifications to any rows in the segment and no queries accessing any rows in the segment.
ALTER TABLE oe.order_items ILM ADD POLICY COLUMN STORE COMPRESS FOR ARCHIVE HIGH SEGMENT AFTER 6 MONTHS OF NO ACCESS;
Note:
These examples specify Hybrid Columnar Compression, which is dependent on the underlying storage system. See Oracle Database Licensing Information for more information.
See Also:
-
"Consider Using Table Compression" for information about different compression levels
-
"Improving Query Performance with Oracle Database In-Memory"
-
Oracle Database VLDB and Partitioning Guide for more information about segment-level and row-level compression tiering
Parent topic: Guidelines for Managing Tables
19.2.9 Consider Using Attribute-Clustered Tables
An attribute-clustered table is a heap-organized table that stores data in close proximity on disk based on user-specified clustering directives.
Note:
This feature is available starting with Oracle Database 12c Release 1 (12.1.0.2).
The directives are as follows:
-
The
CLUSTERING
...
BY
LINEAR
ORDER
directive orders data in a table according to specified columns.BY
LINEAR
ORDER
clustering, which is the default, is best when queries qualify the prefix of columns specified in the clustering clause. For example, if queries ofsh.sales
often specify either a customer ID or both customer ID and product ID, then you could cluster data in the table using the linear column ordercust_id
,prod_id
. Note that the specified columns can be in multiple tables. -
The
CLUSTERING
...
BY
INTERLEAVED
ORDER
directive orders data in one or more tables using a special algorithm, similar to a z-order function, that permits multicolumn I/O reduction.BY
INTERLEAVED
ORDER
clustering is best when queries specify a variety of column combinations. The columns can be in one or more tables. For example, if queries ofsh.sales
specify different dimensions in different orders, then you could cluster data in thesales
table according to columns in these dimensions.
Attribute clustering is available for the following types of operations:
-
Direct-path
INSERT
-
Online redefinition
See "Redefining Tables Online".
-
Data movement operations, such as
ALTER
TABLE
...
MOVE
operations -
Partition maintenance operations that create new segments, such as
ALTER
TABLE
...
MERGE
PARTITION
operations
Attribute clustering is ignored for conventional DML.
An attribute-clustered table has the following advantages:
-
More optimized single block I/O is possible for table lookups when attribute clustering is aligned with common index access. For example, optimized I/O is possible for an index range scan on the leading column you chose for attribute clustering.
-
Data ordering enables more optimal pruning for Exadata storage indexes and in-memory min/max pruning.
-
You can cluster fact tables based on joined attributes from other tables.
-
Attribute clustering can improve data compression and in this way indirectly improve table scan costs. When the same values are close to each other on disk, the database can more easily compress them.
Attribute-clustered tables are often used in data warehousing environments, but they are useful in any environment that can benefit from these advantages. Use the CLUSTERING
clause in a CREATE
TABLE
SQL statement to create an attribute-clustered table.
See Also:
-
Oracle Database Concepts for conceptual information about attribute-clustered tables
-
Oracle Database Data Warehousing Guide for information about using attribute-clustered tables
Parent topic: Guidelines for Managing Tables
19.2.10 Consider Using Zone Maps
A zone is a set of contiguous data blocks on disk. A zone map tracks the minimum and maximum of specified columns for all individual zones.
When a SQL statement contains predicates on columns stored in a zone map, the
database compares the predicate values to the minimum and maximum stored in the zone to
determine which zones to read during SQL execution. The primary benefit of zone maps is
I/O reduction for table scans. I/O is reduced by skipping table blocks that are not
needed in the query result. Use the CREATE MATERIALIZED ZONEMAP
SQL
statement to create a zone map.
Whenever attribute clustering is specified on a table, you can automatically create a zone map on the clustered columns. Due to clustering, minimum and maximum values of the columns are correlated with consecutive data blocks in the attribute-clustered table, which allows for more effective I/O pruning using the associated zone map.
Note:
Zone maps and attribute-clustered tables can be used together or separately.
Starting with Oracle
Database Release 21c, you can automatically create and maintain basic zone maps for
partitioned and non-partitioned heap tables. Use the
DBMS_AUTO_ZONEMAP.CONFIGURE
procedure to manage automatic zone map
creation and maintenance.
See Also:
Oracle Database Licensing Information User Manual for details on which features are supported for different editions and services.
See Also:
-
Oracle Database Concepts for conceptual information about zone maps
-
Oracle Database Data Warehousing Guide for information about using zone maps
-
Oracle Database SQL Language Reference for information about the
CREATE MATERIALIZED ZONEMAP
statement
Parent topic: Guidelines for Managing Tables
19.2.11 Consider Storing Tables in the In-Memory Column Store
The In-Memory Column Store is an optional portion of the system global area (SGA) that stores copies of tables, table partitions, and other database objects that is optimized for rapid scans. In the In-Memory Column Store, table data is stored by column rather than row in the SGA.
Note:
This feature is available starting with Oracle Database 12c Release 1 (12.1.0.2).
Parent topic: Guidelines for Managing Tables
19.2.12 Consider Using Invisible Columns
You can use invisible column to make changes to a table without disrupting applications that use the table.
- Understand Invisible Columns
You can make individual table columns invisible. Any generic access of a table does not show the invisible columns in the table. - Invisible Columns and Column Ordering
There are special considerations for invisible columns and column ordering.
Parent topic: Guidelines for Managing Tables
19.2.12.1 Understand Invisible Columns
You can make individual table columns invisible. Any generic access of a table does not show the invisible columns in the table.
For example, the following operations do not display invisible columns in the output:
-
SELECT
*
FROM
statements in SQL -
DESCRIBE
commands in SQL*Plus -
%ROWTYPE
attribute declarations in PL/SQL -
Describes in Oracle Call Interface (OCI)
You can use a SELECT
statement to display output for an invisible column only if you explicitly specify the invisible column in the column list. Similarly, you can insert a value into an invisible column only if you explicitly specify the invisible column in the column list for the INSERT
statement. If you omit the column list in the INSERT
statement, then the statement can only insert values into visible columns.
You can make a column invisible during table creation or when you add a column to a table, and you can later alter the table to make the same column visible. You can also alter a table to make a visible column invisible.
You might use invisible columns if you want to make changes to a table without disrupting applications that use the table. After you add an invisible column to a table, queries and other operations that must access the invisible column must refer to the column explicitly by name. When you migrate the application to account for the invisible columns, you can make the invisible columns visible.
Virtual columns can be invisible. Also, you can use an invisible column as a partitioning key during table creation.
The following restrictions apply to invisible columns:
-
The following types of tables cannot have invisible columns:
-
External tables
-
Cluster tables
-
Temporary tables
-
-
Attributes of user-defined types cannot be invisible.
Note:
Invisible columns are not the same as system-generated hidden columns. You can make invisible columns visible, but you cannot make hidden columns visible.
Parent topic: Consider Using Invisible Columns
19.2.12.2 Invisible Columns and Column Ordering
There are special considerations for invisible columns and column ordering.
The database usually stores columns in the order in which they were listed in the CREATE
TABLE
statement. If you add a new column to a table, then the new column becomes the last column in the table's column order.
When a table contains one or more invisible columns, the invisible columns are not included in the column order for the table. Column ordering is important when all of the columns in a table are accessed. For example, a SELECT
*
FROM
statement displays columns in the table's column order. Because invisible columns are not included in this type of generic access of a table, they are not included in the column order.
When you make an invisible column visible, the column is included in the table's column order as the last column. When you make a visible column invisible, the invisible column is not included in the column order, and the order of the visible columns in the table might be re-arranged.
For example, consider the following table with an invisible column:
CREATE TABLE mytable (a INT, b INT INVISIBLE, c INT);
Because column b
is invisible, this table has the following column order:
Column | Column Order |
---|---|
|
1 |
|
2 |
Next, make column b
visible:
ALTER TABLE mytable MODIFY (b VISIBLE);
When you make column b
visible, it becomes the last column in the table's column order. Therefore, the table has the following column order:
Column | Column Order |
---|---|
|
1 |
|
2 |
|
3 |
Consider another example that illustrates column ordering in tables with invisible columns. The following table does not contain any invisible columns:
CREATE TABLE mytable2 (x INT, y INT, z INT);
This table has the following column order:
Column | Column Order |
---|---|
|
1 |
|
2 |
|
3 |
Next, make column y
invisible:
ALTER TABLE mytable2 MODIFY (y INVISIBLE);
When you make column y
invisible, column y
is no longer included in the table's column order, and it changes the column order of column z
. Therefore, the table has the following column order:
Column | Column Order |
---|---|
|
1 |
|
2 |
Make column y
visible again:
ALTER TABLE mytable2 MODIFY (y VISIBLE);
Column y
is now last in the table's column order:
Column | Column Order |
---|---|
|
1 |
|
2 |
|
3 |
Parent topic: Consider Using Invisible Columns
19.2.13 Consider Encrypting Columns That Contain Sensitive Data
You can encrypt individual table columns that contain sensitive data. Examples of sensitive data include social security numbers, credit card numbers, and medical records. Column encryption is transparent to your applications, with some restrictions.
Although encryption is not meant to solve all security problems, it does protect your data from users who try to circumvent the security features of the database and access database files directly through the operating system file system.
Column encryption uses the Transparent Data Encryption feature of Oracle Database, which requires that you create a keystore to store the master encryption key for the database. The keystore must be open before you can create a table with encrypted columns and before you can store or retrieve encrypted data. When you open the keystore, it is available to all sessions, and it remains open until you explicitly close it or until the database is shut down.
Transparent Data Encryption supports industry-standard encryption algorithms, including the following types of encryption algorithms Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) algorithms:
-
Advanced Encryption Standard (AES)
-
ARIA
-
GHOST
-
SEED
-
Triple Data Encryption Standard (3DES)
See Oracle Database Transparent Data Encryption Guide for detailed information about the supported encryption algorithms.
You choose the algorithm to use when you create the table. All encrypted columns in the table use the same algorithm. The default is AES192. The encryption key length is implied by the algorithm name. For example, the AES128 algorithm uses 128-bit keys.
If you plan on encrypting many columns in one or more tables, you may want to consider encrypting an entire tablespace instead and storing these tables in that tablespace. Tablespace encryption, which also uses the Transparent Data Encryption feature but encrypts at the physical block level, can perform better than encrypting many columns. Another reason to encrypt at the tablespace level is to address the following limitations of column encryption:
-
Certain data types, such as object data types, are not supported for column encryption.
-
You cannot use the transportable tablespace feature for a tablespace that includes tables with encrypted columns.
-
Other restrictions, which are detailed in Oracle Database Transparent Data Encryption Guide.
See Also:
-
Oracle Database Transparent Data Encryption Guide for more information about Transparent Data Encryption
-
Oracle Database Enterprise User Security Administrator's Guide for instructions for creating and opening keystores
-
Oracle Database SQL Language Reference for information about the
CREATE
TABLE
statement -
Oracle Real Application Clusters Administration and Deployment Guide for information on using a keystore in an Oracle Real Application Clusters environment
Parent topic: Guidelines for Managing Tables
19.2.14 Understand Deferred Segment Creation
When you create heap-organized tables in a locally managed tablespace, the database defers table segment creation until the first row is inserted.
In addition, segment creation is deferred for any LOB columns of the table, any indexes created implicitly as part of table creation, and any indexes subsequently explicitly created on the table.
The advantages of this space allocation method are the following:
-
It saves a significant amount of disk space in applications that create hundreds or thousands of tables upon installation, many of which might never be populated.
-
It reduces application installation time.
There is a small performance penalty when the first row is inserted, because the new segment must be created at that time.
To enable deferred segment creation, compatibility must be set to 11.2.0
or higher.
The new clauses for the CREATE
TABLE
statement are:
-
SEGMENT
CREATION
DEFERRED
-
SEGMENT
CREATION
IMMEDIATE
These clauses override the default setting of the DEFERRED_SEGMENT_CREATION
initialization parameter, TRUE
, which defers segment creation. To disable deferred segment creation, set this parameter to FALSE
.
Note that when you create a table with deferred segment creation, the new table appears in the *_TABLES
views, but no entry for it appears in the *_SEGMENTS
views until you insert the first row.
You can verify deferred segment creation by viewing the SEGMENT_CREATED
column in *_TABLES
, *_INDEXES
, and *_LOBS
views for nonpartitioned tables, and in *_TAB_PARTITIONS
, *_IND_PARTITIONS,
and *_LOB_PARTITIONS
views for partitioned tables.
Note:
With this new allocation method, it is essential that you do proper capacity planning so that the database has enough disk space to handle segment creation when tables are populated. See "Capacity Planning for Database Objects ".
The following example creates two tables to demonstrate deferred segment creation. The first table uses the SEGMENT
CREATION
DEFERRED
clause. No segments are created for it initially. The second table uses the SEGMENT
CREATION
IMMEDIATE
clause and, therefore, segments are created for it immediately.
CREATE TABLE part_time_employees ( empno NUMBER(8), name VARCHAR2(30), hourly_rate NUMBER (7,2) ) SEGMENT CREATION DEFERRED; CREATE TABLE hourly_employees ( empno NUMBER(8), name VARCHAR2(30), hourly_rate NUMBER (7,2) ) SEGMENT CREATION IMMEDIATE PARTITION BY RANGE(empno) (PARTITION empno_to_100 VALUES LESS THAN (100), PARTITION empno_to_200 VALUES LESS THAN (200));
The following query against USER_SEGMENTS
returns two rows for HOURLY_EMPLOYEES
, one for each partition, but returns no rows for PART_TIME_EMPLOYEES because
segment creation for that table was deferred.
SELECT segment_name, partition_name FROM user_segments; SEGMENT_NAME PARTITION_NAME -------------------- ------------------------------ HOURLY_EMPLOYEES EMPNO_TO_100 HOURLY_EMPLOYEES EMPNO_TO_200
The USER_TABLES
view shows that PART_TIME_EMPLOYEES
has no segments:
SELECT table_name, segment_created FROM user_tables;
TABLE_NAME SEGMENT_CREATED ------------------------------ ---------------------------------------- PART_TIME_EMPLOYEES NO HOURLY_EMPLOYEES N/A
For the HOURLY_EMPLOYEES
table, which is partitioned, the segment_created
column is N/A
because the USER_TABLES
view does not provide that information for partitioned tables. It is available from the USER_TAB_PARTITIONS
view, shown below.
SELECT table_name, segment_created, partition_name FROM user_tab_partitions; TABLE_NAME SEGMENT_CREATED PARTITION_NAME -------------------- -------------------- ------------------------------ HOURLY_EMPLOYEES YES EMPNO_TO_100 HOURLY_EMPLOYEES YES EMPNO_TO_200
The following statements add employees to these tables.
INSERT INTO hourly_employees VALUES (99, 'FRose', 20.00); INSERT INTO hourly_employees VALUES (150, 'LRose', 25.00); INSERT INTO part_time_employees VALUES (50, 'KReilly', 10.00);
Repeating the same SELECT
statements as before shows that PART_TIME_EMPLOYEES
now has a segment, due to the insertion of row data. HOURLY_EMPLOYEES
remains as before.
SELECT segment_name, partition_name FROM user_segments; SEGMENT_NAME PARTITION_NAME -------------------- ------------------------------ PART_TIME_EMPLOYEES HOURLY_EMPLOYEES EMPNO_TO_100 HOURLY_EMPLOYEES EMPNO_TO_200
SELECT table_name, segment_created FROM user_tables; TABLE_NAME SEGMENT_CREATED -------------------- -------------------- PART_TIME_EMPLOYEES YES HOURLY_EMPLOYEES N/A
The USER_TAB_PARTITIONS
view does not change.
See Also:
Oracle Database SQL Language Reference for notes and restrictions on deferred segment creation
Parent topic: Guidelines for Managing Tables
19.2.15 Materializing Segments
The DBMS_SPACE_ADMIN
package includes the MATERIALIZE_DEFERRED_SEGMENTS()
procedure, which enables you to materialize segments for tables, table partitions, and dependent objects created with deferred segment creation enabled.
You can add segments as needed, rather than starting with more than you need and using database resources unnecessarily.
The following example materializes segments for the EMPLOYEES
table in the HR
schema.
BEGIN DBMS_SPACE_ADMIN.MATERIALIZE_DEFERRED_SEGMENTS( schema_name => 'HR', table_name => 'EMPLOYEES'); END;
See Also:
Oracle Database PL/SQL Packages and Types Reference for details about this procedure
Parent topic: Guidelines for Managing Tables
19.2.16 Estimate Table Size and Plan Accordingly
Estimate the sizes of tables before creating them. Preferably, do this as part of database planning. Knowing the sizes, and uses, for database tables is an important part of database planning.
You can use the combined estimated size of tables, along with estimates for indexes, undo space, and redo log files, to determine the amount of disk space that is required to hold an intended database. From these estimates, you can make correct hardware purchases.
You can use the estimated size and growth rate of an individual table to better determine the attributes of a tablespace and its underlying data files that are best suited for the table. This can enable you to more easily manage the table disk space and improve I/O performance of applications that use the table.
See Also:
Parent topic: Guidelines for Managing Tables
19.2.17 Restrictions to Consider When Creating Tables
There are restrictions to consider when you create tables.
Here are some restrictions that may affect your table planning and usage:
-
Tables containing object types cannot be imported into a pre-Oracle8 database.
-
You cannot merge an exported table into a preexisting table having the same name in a different schema.
-
You cannot move types and extent tables to a different schema when the original data still exists in the database.
-
Oracle Database has a limit on the total number of columns that a table (or attributes that an object type) can have. See Oracle Database Reference for this limit.
Further, when you create a table that contains user-defined type data, the database maps columns of user-defined type to relational columns for storing the user-defined type data. This causes additional relational columns to be created. This results in "hidden" relational columns that are not visible in a
DESCRIBE
table statement and are not returned by aSELECT *
statement. Therefore, when you create an object table, or a relational table with columns ofREF
, varray, nested table, or object type, be aware that the total number of columns that the database actually creates for the table can be more than those you specify.See Also:
Oracle Database Object-Relational Developer's Guide for more information about user-defined types
Parent topic: Guidelines for Managing Tables
19.3 Creating Tables
Create tables using the SQL statement CREATE TABLE
.
To create a new table in your schema, you must have the CREATE TABLE
system privilege. To create a table in another user's schema, you must have the CREATE ANY TABLE
system privilege. Additionally, the owner of the table must have a quota for the tablespace that contains the table, or the UNLIMITED TABLESPACE
system privilege.
- Example: Creating a Table
An example illustrates creating a table. - Creating a Temporary Table
Temporary tables are useful in applications where a result set is to be buffered (temporarily persisted), perhaps because it is constructed by running multiple DML operations. You can create either a global temporary table or a private temporary table. - Parallelizing Table Creation
When you specify theAS SELECT
clause to create a table and populate it with data from another table, you can use parallel execution.
See Also:
-
Oracle Database SQL Language Reference for exact syntax of the
CREATE TABLE
and other SQL statements discussed in this chapter -
Oracle Database JSON Developer’s Guide for an example of creating a table with JSON columns
Parent topic: Managing Tables
19.3.1 Example: Creating a Table
An example illustrates creating a table.
When you issue the following statement, you create a table named admin_emp
in the hr
schema and store it in the admin_tbs
tablespace:
Live SQL:
View and run a related example on Oracle Live SQL at Oracle Live SQL: Creating and Modifying Tables.
CREATE TABLE hr.admin_emp ( empno NUMBER(5) PRIMARY KEY, ename VARCHAR2(15) NOT NULL, ssn NUMBER(9) ENCRYPT USING 'AES256', job VARCHAR2(10), mgr NUMBER(5), hiredate DATE DEFAULT (sysdate), photo BLOB, sal NUMBER(7,2), hrly_rate NUMBER(7,2) GENERATED ALWAYS AS (sal/2080), comm NUMBER(7,2), deptno NUMBER(3) NOT NULL CONSTRAINT admin_dept_fkey REFERENCES hr.departments (department_id), comments VARCHAR2(32767), status VARCHAR2(10) INVISIBLE) TABLESPACE admin_tbs STORAGE ( INITIAL 50K); COMMENT ON TABLE hr.admin_emp IS 'Enhanced employee table';
Note the following about this example:
-
Integrity constraints are defined on several columns of the table.
-
The
STORAGE
clause specifies the size of the first extent. See Oracle Database SQL Language Reference for details on this clause. -
Encryption is defined on one column (
ssn
), through the Transparent Data Encryption feature of Oracle Database. The keystore must therefore be open for thisCREATE
TABLE
statement to succeed. -
The
photo
column is of data typeBLOB
, which is a member of the set of data types called large objects (LOBs). LOBs are used to store semi-structured data (such as an XML tree) and unstructured data (such as the stream of bits in a color image). -
One column is defined as a virtual column (
hrly_rate
). This column computes the employee's hourly rate as the yearly salary divided by 2,080. See Oracle Database SQL Language Reference for a discussion of rules for virtual columns. -
The
comments
column is aVARCHAR2
column that is larger than 4000 bytes. Beginning with Oracle Database 12c, the maximum size for theVARCHAR2
,NVARCHAR2
, andRAW
data types is increased to 32767 bytes.To use extended data types, set the
MAX_STRING_SIZE
initialization parameter toEXTENDED
. See Oracle Database Reference for information about setting this parameter. -
The
status
column is invisible. -
A
COMMENT
statement is used to store a comment for the table. You query the*_TAB_COMMENTS
data dictionary views to retrieve such comments. See Oracle Database SQL Language Reference for more information.
See Also:
-
Oracle Database SQL Language Reference for a description of the data types that you can specify for table columns
-
Oracle Database Transparent Data Encryption Guide for information about Transparent Data Encryption
-
Oracle Database SecureFiles and Large Objects Developer's Guide for more information about LOBs.
Parent topic: Creating Tables
19.3.2 Creating a Temporary Table
Temporary tables are useful in applications where a result set is to be buffered (temporarily persisted), perhaps because it is constructed by running multiple DML operations. You can create either a global temporary table or a private temporary table.
- Overview of Temporary Tables
A temporary table holds data that exists only for the duration of a transaction or session. - Considerations When Creating Temporary Tables
Be aware of some considerations when you create temporary tables. - Creating Global Temporary Tables
Global temporary tables are permanent database objects that are stored on disk and visible to all sessions connected to the database. - Creating Private Temporary Tables
Private temporary tables are temporary database objects that are dropped at the end of a transaction or session. Private temporary tables are stored in memory and each one is visible only to the session that created it.
Parent topic: Creating Tables
19.3.2.1 Overview of Temporary Tables
A temporary table holds data that exists only for the duration of a transaction or session.
Data in a temporary table is private to the session. Each session can only see and modify its own data.
You can create either a global temporary table or a private temporary table. The following table shows the essential differences between them.
Table 19-3 Temporary Table Characteristics
Characteristic | Global | Private |
---|---|---|
Naming rules | Same as for permanent tables | Must be prefixed with ORA$PTT_ |
Visibility of table definition | All sessions | Only the session that created the table |
Storage of table definition | Disk | Memory only |
Types | Transaction-specific (ON COMMIT DELETE ROWS ) or session-specific (ON COMMIT PRESERVE ROWS )
|
Transaction-specific (ON COMMIT DROP DEFINITION ) or session-specific (ON COMMIT PRESERVE DEFINITION )
|
A third type of temporary table, known as a cursor-duration temporary table, is created by the database automatically for certain types of queries.
See Also:
Oracle Database SQL Tuning Guide to learn more about cursor-duration temporary tables
Parent topic: Creating a Temporary Table
19.3.2.2 Considerations When Creating Temporary Tables
Be aware of some considerations when you create temporary tables.
Unlike permanent tables, temporary tables do not automatically allocate a segment when they are created. Instead, segments are allocated when the first INSERT
(or CREATE
TABLE
AS
SELECT
) is performed. Therefore, if a SELECT
, UPDATE
, or DELETE
is performed before the first INSERT
, then the table appears to be empty.
DDL operations (except TRUNCATE
) are allowed on an existing temporary table only if no session is currently bound to that temporary table.
If you rollback a transaction, the data you entered is lost, although the table definition persists.
A transaction-specific temporary table allows only one transaction at a time. If there are several autonomous transactions in a single transaction scope, each autonomous transaction can use the table only as soon as the previous one commits.
Because the data in a temporary table is, by definition, temporary, backup and recovery of temporary table data is not available in the event of a system failure. To prepare for such a failure, you should develop alternative methods for preserving temporary table data.
Parent topic: Creating a Temporary Table
19.3.2.3 Creating Global Temporary Tables
Global temporary tables are permanent database objects that are stored on disk and visible to all sessions connected to the database.
- About Creating Global Temporary Tables
The metadata of a global temporary table is visible to multiple users and their sessions, but its content is local to a session. - Examples: Creating a Global Temporary Table
Examples illustrate how to create a global temporary table.
Parent topic: Creating a Temporary Table
19.3.2.3.1 About Creating Global Temporary Tables
The metadata of a global temporary table is visible to multiple users and their sessions, but its content is local to a session.
For example, assume a Web-based airlines reservations application allows a customer to create several optional itineraries. Each itinerary is represented by a row in a global temporary table. The application updates the rows to reflect changes in the itineraries. When the customer decides which itinerary they want to use, the application moves the row for that itinerary to a persistent table.
During the session, the itinerary data is private. At the end of the session, the optional itineraries are dropped.
The definition of a global temporary table is visible to all sessions, but the data in a global temporary table is visible only to the session that inserts the data into the table.
Use the CREATE GLOBAL TEMPORARY TABLE
statement to create a global temporary table. The ON COMMIT
clause indicates if the data in the table is transaction-specific (the default) or session-specific, the implications of which are as follows:
ON COMMIT Setting | Implications |
---|---|
|
This creates a global temporary table that is transaction specific. A session becomes bound to the global temporary table with a transactions first insert into the table. The binding goes away at the end of the transaction. The database truncates the table (delete all rows) after each commit. |
|
This creates a global temporary table that is session specific. A session gets bound to the global temporary table with the first insert into the table in the session. This binding goes away at the end of the session or by issuing a |
Parent topic: Creating Global Temporary Tables
19.3.2.3.2 Examples: Creating a Global Temporary Table
Examples illustrate how to create a global temporary table.
This statement creates a global temporary table that is transaction specific:
CREATE GLOBAL TEMPORARY TABLE admin_work_area_trans (startdate DATE, enddate DATE, class CHAR(20)) ON COMMIT DELETE ROWS;
This statement creates a global temporary table that is session specific:
CREATE GLOBAL TEMPORARY TABLE admin_work_area_session (startdate DATE, enddate DATE, class CHAR(20)) ON COMMIT PRESERVE ROWS;
Indexes can be created on global temporary tables. They are also temporary and the data in the index has the same session or transaction scope as the data in the underlying table.
By default, rows in a global temporary table are stored in the default temporary tablespace of the user who creates it. However, you can assign a global temporary table to another tablespace upon creation of the global temporary table by using the TABLESPACE
clause of CREATE GLOBAL TEMPORARY TABLE
. You can use this feature to conserve space used by global temporary tables. For example, if you must perform many small global temporary table operations and the default temporary tablespace is configured for sort operations and thus uses a large extent size, these small operations will consume lots of unnecessary disk space. In this case it is better to allocate a second temporary tablespace with a smaller extent size.
The following two statements create a temporary tablespace with a 64 KB extent size, and then a new global temporary table in that tablespace.
CREATE TEMPORARY TABLESPACE tbs_t1 TEMPFILE 'tbs_t1.f' SIZE 50m REUSE AUTOEXTEND ON MAXSIZE UNLIMITED EXTENT MANAGEMENT LOCAL UNIFORM SIZE 64K; CREATE GLOBAL TEMPORARY TABLE admin_work_area (startdate DATE, enddate DATE, class CHAR(20)) ON COMMIT DELETE ROWS TABLESPACE tbs_t1;
See Also:
-
Oracle Database SQL Language Reference for more information about using the
CREATE TABLE
statement to create a global temporary table, including restrictions that apply
Parent topic: Creating Global Temporary Tables
19.3.2.4 Creating Private Temporary Tables
Private temporary tables are temporary database objects that are dropped at the end of a transaction or session. Private temporary tables are stored in memory and each one is visible only to the session that created it.
- About Creating Private Temporary Tables
The metadata and content of a private temporary table is visible only within the session that created the it. - Examples: Creating a Private Temporary Table
These examples illustrate creating a private temporary table.
Parent topic: Creating a Temporary Table
19.3.2.4.1 About Creating Private Temporary Tables
The metadata and content of a private temporary table is visible only within the session that created the it.
Private temporary tables are useful in the following situations:
-
When an application stores temporary data in transient tables that are populated once, read few times, and then dropped at the end of a transaction or session
-
When a session is maintained indefinitely and must create different temporary tables for different transactions
-
When the creation of a temporary table must not start a new transaction or commit an existing transaction
-
When different sessions of the same user must use the same name for a temporary table
-
When a temporary table is required for a read-only database
For example, assume a reporting application uses only one schema, but the application uses multiple connections with the schema to run different reports. The sessions use private temporary tables for calculations during individual transactions, and each session creates a private temporary table with the same name. When each transaction commits, its temporary data is no longer needed. Both the definition of a private temporary table and the data in a private temporary table is visible only to the session that created the table.
Use the CREATE PRIVATE TEMPORARY TABLE
statement to create a private temporary table. The ON COMMIT
clause indicates if the data in the table is transaction-specific (the default) or session-specific, the implications of which are as follows:
ON COMMIT Setting | Implications |
---|---|
|
This creates a private temporary table that is transaction specific. All data in the table is lost, and the table is dropped at the end of transaction. |
|
This creates a private temporary table that is session specific. All data in the table is lost, and the table is dropped at the end of the session that created the table. |
Note:
Names of private temporary tables must be prefixed according to the initialization parameter private_temp_table_prefix
.
Parent topic: Creating Private Temporary Tables
19.3.2.4.2 Examples: Creating a Private Temporary Table
These examples illustrate creating a private temporary table.
This statement creates a private temporary table that is transaction specific:
CREATE PRIVATE TEMPORARY TABLE ORA$PTT_sales_ptt_transaction (time_id DATE, amount_sold NUMBER(10,2)) ON COMMIT DROP DEFINITION;
This statement creates a private temporary table that is session specific:
CREATE PRIVATE TEMPORARY TABLE ORA$PTT_sales_ptt_session (time_id DATE, amount_sold NUMBER(10,2)) ON COMMIT PRESERVE DEFINITION;
By default, rows in a private temporary table are stored in the default temporary tablespace of the user who creates it. However, you can assign a private temporary table to another temporary tablespace during the creation of the temporary table by using the TABLESPACE
clause of CREATE PRIVATE TEMPORARY TABLE
statement.
See Also:
-
Oracle Database SQL Language Reference for more information about using the
CREATE TABLE
statement to create a private temporary table, including restrictions that apply
Parent topic: Creating Private Temporary Tables
19.3.3 Parallelizing Table Creation
When you specify the AS SELECT
clause to create a table and populate it with data from another table, you can use parallel execution.
The CREATE TABLE...AS SELECT
statement contains two parts: a CREATE
part (DDL) and a SELECT
part (query). Oracle Database can parallelize both parts of the statement. The CREATE
part is parallelized if one of the following is true:
-
A
PARALLEL
clause is included in theCREATE TABLE...AS SELECT
statement -
An
ALTER SESSION FORCE PARALLEL DDL
statement is specified
The query part is parallelized if all of the following are true:
-
The query includes a parallel hint specification (
PARALLEL
orPARALLEL_INDEX
) or theCREATE
part includes thePARALLEL
clause or the schema objects referred to in the query have aPARALLEL
declaration associated with them. -
At least one of the tables specified in the query requires either a full table scan or an index range scan spanning multiple partitions.
If you parallelize the creation of a table, that table then has a parallel declaration (the PARALLEL
clause) associated with it. Any subsequent DML or queries on the table, for which parallelization is possible, will attempt to use parallel execution.
The following simple statement parallelizes the creation of a table and stores the result in a compressed format, using table compression:
CREATE TABLE hr.admin_emp_dept PARALLEL COMPRESS AS SELECT * FROM hr.employees WHERE department_id = 10;
In this case, the PARALLEL
clause tells the database to select an optimum number of parallel execution servers when creating the table.
See Also:
-
Oracle Database VLDB and Partitioning Guide for detailed information on using parallel execution
Parent topic: Creating Tables
19.4 Loading Tables
There are several techniques for loading data into tables.
Note:
The default size of the first extent of any new segment for a partitioned table is 8 MB instead of 64 KB. This helps improve performance of inserts and queries on partitioned tables. Although partitioned tables will start with a larger initial size, once sufficient data is inserted, the space consumption will be the same as in previous releases. You can override this default by setting the INITIAL
size in the storage clause for the table. This new default only applies to table partitions and LOB partitions.
- Methods for Loading Tables
There are several means of inserting or initially loading data into your tables. - Improving INSERT Performance with Direct-Path INSERT
When loading large amounts of data, you can improve load performance by using direct-pathINSERT
. - Using Conventional Inserts to Load Tables
During conventional INSERT operations, the database reuses free space in the table, interleaving newly inserted data with existing data. During such operations, the database also maintains referential integrity constraints. Unlike direct-pathINSERT
operations, conventionalINSERT
operations do not require an exclusive lock on the table. - Avoiding Bulk INSERT Failures with DML Error Logging
You can avoid bulkINSERT
failures by using the DML error logging feature.
Parent topic: Managing Tables
19.4.1 Methods for Loading Tables
There are several means of inserting or initially loading data into your tables.
Most commonly used are the following:
Method | Description |
---|---|
SQL*Loader |
This Oracle utility program loads data from external files into tables of an Oracle Database. Starting with Oracle Database 12c, SQL*Loader supports express mode. SQL*Loader express mode eliminates the need for a control file. Express mode simplifies loading data from external files. With express mode, SQL*Loader attempts to use the external table load method. If the external table load method is not possible, then SQL*Loader attempts to use direct path. If direct path is not possible, then SQL*Loader uses conventional path. SQL*Loader express mode automatically identifies the input datatypes based on the table column types and controls parallelism. SQL*Loader uses defaults to simplify usage, but you can override many of the defaults with command line parameters. You optionally can specify the direct path or the conventional path load method instead of using express mode. For information about SQL*Loader, see Oracle Database Utilities. |
|
Using this SQL statement you can create a table and populate it with data selected from another existing table, including an external table. |
|
The One form of the If you are inserting a lot of data and want to avoid statement termination and rollback if an error is encountered, you can insert with DML error logging. See "Avoiding Bulk INSERT Failures with DML Error Logging". |
|
The |
Note:
Only a few details and examples of inserting data into tables are included in this book. Oracle documentation specific to data warehousing and application development provide more extensive information about inserting and manipulating data in tables. See:
See Also:
Parent topic: Loading Tables
19.4.2 Improving INSERT Performance with Direct-Path INSERT
When loading large amounts of data, you can improve load performance by using direct-path INSERT
.
- About Direct-Path INSERT
Direct-path insert operations are typically faster than conventional insert operations. - How Direct-Path INSERT Works
You can use direct-pathINSERT
on both partitioned and nonpartitioned tables. - Loading Data with Direct-Path INSERT
You can load data with direct-pathINSERT
by using direct-pathINSERT
SQL statements, inserting data in parallel mode, or by using the Oracle SQL*Loader utility in direct-path mode. A direct-pathINSERT
can be done in either serial or parallel mode. - Logging Modes for Direct-Path INSERT
Direct-pathINSERT
lets you choose whether to log redo and undo information during the insert operation. - Additional Considerations for Direct-Path INSERT
Parent topic: Loading Tables
19.4.2.1 About Direct-Path INSERT
Direct-path insert operations are typically faster than conventional insert operations.
Oracle Database inserts data into a table in one of two ways:
-
During conventional INSERT operations, the database reuses free space in the table, interleaving newly inserted data with existing data. During such operations, the database also maintains referential integrity constraints.
-
During direct-path INSERT operations, the database appends the inserted data after existing data in the table. Data is written directly into data files, bypassing the buffer cache. Free space in the table is not reused, and referential integrity constraints are ignored. Direct-path
INSERT
can perform significantly better than conventional insert.
The database can insert data either in serial mode, where one process executes the statement, or in parallel mode, where multiple processes work together simultaneously to run a single SQL statement. The latter is referred to as parallel execution.
The following are benefits of direct-path INSERT
:
-
During direct-path
INSERT
, you can disable the logging of redo and undo entries to reduce load time. Conventional insert operations, in contrast, must always log such entries, because those operations reuse free space and maintain referential integrity. -
Direct-path
INSERT
operations ensure atomicity of the transaction, even when run in parallel mode. Atomicity cannot be guaranteed during parallel direct path loads (using SQL*Loader).
When performing parallel direct path loads, one notable difference between SQL*Loader and INSERT
statements is the following: If errors occur during parallel direct path loads with SQL*Loader, the load completes, but some indexes could be marked UNUSABLE
at the end of the load. Parallel direct-path INSERT
, in contrast, rolls back the statement if errors occur during index update.
Note:
A conventional INSERT
operation checks for violations of NOT
NULL
constraints during the insert. Therefore, if a NOT
NULL
constraint is violated for a conventional INSERT
operation, then the error is returned during the insert. A direct-path INSERT
operation checks for violations of NOT
NULL
constraints before the insert. Therefore, if a NOT
NULL
constraint is violated for a direct-path INSERT
operation, then the error is returned before the insert.
Parent topic: Improving INSERT Performance with Direct-Path INSERT
19.4.2.2 How Direct-Path INSERT Works
You can use direct-path INSERT
on both partitioned and nonpartitioned tables.
- Serial Direct-Path INSERT into Partitioned or Nonpartitioned Tables
The single process inserts data beyond the current high water mark of the table segment or of each partition segment. (The high-water mark is the level at which blocks have never been formatted to receive data.) When aCOMMIT
runs, the high-water mark is updated to the new value, making the data visible to users. - Parallel Direct-Path INSERT into Partitioned Tables
This situation is analogous to serial direct-pathINSERT
. Each parallel execution server is assigned one or more partitions, with no more than one process working on a single partition. - Parallel Direct-Path INSERT into Nonpartitioned Tables
Each parallel execution server allocates a new temporary segment and inserts data into that temporary segment. When aCOMMIT
runs, the parallel execution coordinator merges the new temporary segments into the primary table segment, where it is visible to users.
Parent topic: Improving INSERT Performance with Direct-Path INSERT
19.4.2.2.1 Serial Direct-Path INSERT into Partitioned or Nonpartitioned Tables
The single process inserts data beyond the current high water mark of the table segment or of each partition segment. (The high-water mark is the level at which blocks have never been formatted to receive data.) When a COMMIT
runs, the high-water mark is updated to the new value, making the data visible to users.
Parent topic: How Direct-Path INSERT Works
19.4.2.2.2 Parallel Direct-Path INSERT into Partitioned Tables
This situation is analogous to serial direct-path INSERT
. Each parallel execution server is assigned one or more partitions, with no more than one process working on a single partition.
Each parallel execution server inserts data beyond the current high-water mark of its assigned partition segment(s). When a COMMIT
runs, the high-water mark of each partition segment is updated to its new value, making the data visible to users.
Parent topic: How Direct-Path INSERT Works
19.4.2.2.3 Parallel Direct-Path INSERT into Nonpartitioned Tables
Each parallel execution server allocates a new temporary segment and inserts data into that temporary segment. When a COMMIT
runs, the parallel execution coordinator merges the new temporary segments into the primary table segment, where it is visible to users.
Parent topic: How Direct-Path INSERT Works
19.4.2.3 Loading Data with Direct-Path INSERT
You can load data with direct-path INSERT
by using direct-path INSERT
SQL statements, inserting data in parallel mode, or by using the Oracle SQL*Loader utility in direct-path mode. A direct-path INSERT
can be done in either serial or parallel mode.
- Serial Mode Inserts with SQL Statements
There are various ways to activate direct-pathINSERT
in serial mode with SQL. - Parallel Mode Inserts with SQL Statements
When you are inserting in parallel mode, direct-pathINSERT
is the default. However, you can insert in parallel mode using conventionalINSERT
by using theNOAPPEND
PARALLEL
hint.
Parent topic: Improving INSERT Performance with Direct-Path INSERT
19.4.2.3.1 Serial Mode Inserts with SQL Statements
There are various ways to activate direct-path INSERT
in serial mode with SQL.
You can activate direct-path INSERT
in serial mode with SQL in the following ways:
-
If you are performing an
INSERT
with a subquery, specify theAPPEND
hint in eachINSERT
statement, either immediately after theINSERT
keyword, or immediately after theSELECT
keyword in the subquery of theINSERT
statement. -
If you are performing an
INSERT
with theVALUES
clause, specify theAPPEND_VALUES
hint in eachINSERT
statement immediately after theINSERT
keyword. Direct-pathINSERT
with theVALUES
clause is best used when there are hundreds of thousands or millions of rows to load. The typical usage scenario is for array inserts using OCI. Another usage scenario might be inserts in aFORALL
statement in PL/SQL.
If you specify the APPEND
hint (as opposed to the APPEND_VALUES
hint) in an INSERT
statement with a VALUES
clause, the APPEND
hint is ignored and a conventional insert is performed.
The following is an example of using the APPEND
hint to perform a direct-path INSERT
:
INSERT /*+ APPEND */ INTO sales_hist SELECT * FROM sales WHERE cust_id=8890;
The following PL/SQL code fragment is an example of using the APPEND_VALUES
hint:
FORALL i IN 1..numrecords INSERT /*+ APPEND_VALUES */ INTO orderdata VALUES(ordernum(i), custid(i), orderdate(i),shipmode(i), paymentid(i)); COMMIT;
Parent topic: Loading Data with Direct-Path INSERT
19.4.2.3.2 Parallel Mode Inserts with SQL Statements
When you are inserting in parallel mode, direct-path INSERT
is the default. However, you can insert in parallel mode using conventional INSERT
by using the NOAPPEND
PARALLEL
hint.
To run in parallel DML mode, the following requirements must be met:
-
You must have Oracle Enterprise Edition installed.
-
You must enable parallel DML in your session. To do this, submit the following statement:
ALTER SESSION { ENABLE | FORCE } PARALLEL DML;
-
You must meet at least one of the following requirements:
-
Specify the parallel attribute for the target table, either at create time or subsequently
-
Specify the
PARALLEL
hint for each insert operation -
Set the database initialization parameter
PARALLEL_DEGREE_POLICY
toAUTO
-
To disable direct-path INSERT
, specify the NOAPPEND
hint in each INSERT
statement. Doing so overrides parallel DML mode.
Note:
You cannot query or modify data inserted using direct-path INSERT
immediately after the insert is complete. If you attempt to do so, an ORA-12838 error is generated. You must first issue a COMMIT
statement before attempting to read or modify the newly-inserted data.
See Also:
-
Oracle Database SQL Tuning Guide for more information on using hints
-
Oracle Database SQL Language Reference for more information on the subquery syntax of
INSERT
statements and for additional restrictions on using direct-pathINSERT
Parent topic: Loading Data with Direct-Path INSERT
19.4.2.4 Logging Modes for Direct-Path INSERT
Direct-path INSERT
lets you choose whether to log redo and undo information during the insert operation.
You specify the logging mode for direct-path INSERT
in the following ways:
-
You can specify logging mode for a table, partition, index, or
LOB
storage at create time (in aCREATE
statement) or subsequently (in anALTER
statement). -
If you do not specify either
LOGGING
orNOLOGGING
at these times:-
The logging attribute of a partition defaults to the logging attribute of its table.
-
The logging attribute of a table or index defaults to the logging attribute of the tablespace in which it resides.
-
The logging attribute of
LOB
storage defaults toLOGGING
if you specifyCACHE
forLOB
storage. If you do not specifyCACHE
, then the logging attributes defaults to that of the tablespace in which theLOB
values resides.
-
-
You set the logging attribute of a tablespace in a
CREATE
TABLESPACE
orALTER
TABLESPACE
statements.Note:
If the database or tablespace is in
FORCE
LOGGING
mode, then direct-pathINSERT
always logs, regardless of the logging setting.
- Direct-Path INSERT with Logging
In this mode, Oracle Database performs full redo logging for instance and media recovery. - Direct-Path INSERT without Logging
In this mode, Oracle Database inserts data without redo or undo logging. Instead, the database logs a small number of block range invalidation redo records and periodically updates the control file with information about the most recent direct write.
Parent topic: Improving INSERT Performance with Direct-Path INSERT
19.4.2.4.1 Direct-Path INSERT with Logging
In this mode, Oracle Database performs full redo logging for instance and media recovery.
If the database is in ARCHIVELOG
mode, then you can archive redo logs to tape. If the database is in NOARCHIVELOG
mode, then you can recover instance crashes but not disk failures.
Parent topic: Logging Modes for Direct-Path INSERT
19.4.2.4.2 Direct-Path INSERT without Logging
In this mode, Oracle Database inserts data without redo or undo logging. Instead, the database logs a small number of block range invalidation redo records and periodically updates the control file with information about the most recent direct write.
Direct-path INSERT
without logging improves performance. However, if you subsequently must perform media recovery, the invalidation redo records mark a range of blocks as logically corrupt, because no redo data was logged for them. Therefore, it is important that you back up the data after such an insert operation.
You can significantly improve the performance of unrecoverable direct-path inserts by disabling the periodic update of the control files. You do so by setting the initialization parameter DB_UNRECOVERABLE_SCN_TRACKING
to FALSE
. However, if you perform an unrecoverable direct-path insert with these control file updates disabled, you will no longer be able to accurately query the database to determine if any data files are currently unrecoverable.
See Also:
-
Oracle Database Backup and Recovery User's Guide for more information about unrecoverable data files
-
The section "Determining If a Backup Is Required After Unrecoverable Operations" in Oracle Data Guard Concepts and Administration
Parent topic: Logging Modes for Direct-Path INSERT
19.4.2.5 Additional Considerations for Direct-Path INSERT
When using direct-path INSERT
, consider issues related to compressed tables, index maintenance, disk space, and locking.
- Compressed Tables and Direct-Path INSERT
If a table is created with the basic table compression, then you must use direct-pathINSERT
to compress table data as it is loaded. If a table is created with advanced row, warehouse, or archive compression, then best compression ratios are achieved with direct-pathINSERT
. - Index Maintenance with Direct-Path INSERT
Oracle Database performs index maintenance at the end of direct-pathINSERT
operations on tables (partitioned or nonpartitioned) that have indexes. - Space Considerations with Direct-Path INSERT
Direct-pathINSERT
requires more space than conventional pathINSERT
. - Locking Considerations with Direct-Path INSERT
During direct-pathINSERT
, the database obtains exclusive locks on the table (or on all partitions of a partitioned table).
Parent topic: Improving INSERT Performance with Direct-Path INSERT
19.4.2.5.1 Compressed Tables and Direct-Path INSERT
If a table is created with the basic table compression, then you must use direct-path INSERT
to compress table data as it is loaded. If a table is created with advanced row, warehouse, or archive compression, then best compression ratios are achieved with direct-path INSERT
.
See "Consider Using Table Compression" for more information.
Parent topic: Additional Considerations for Direct-Path INSERT
19.4.2.5.2 Index Maintenance with Direct-Path INSERT
Oracle Database performs index maintenance at the end of direct-path INSERT
operations on tables (partitioned or nonpartitioned) that have indexes.
This index maintenance is performed by the parallel execution servers for parallel direct-path INSERT
or by the single process for serial direct-path INSERT
. You can avoid the performance impact of index maintenance by making the index unusable before the INSERT
operation and then rebuilding it afterward.
See Also:
Parent topic: Additional Considerations for Direct-Path INSERT
19.4.2.5.3 Space Considerations with Direct-Path INSERT
Direct-path INSERT
requires more space than conventional path INSERT
.
All serial direct-path INSERT
operations, as well as parallel direct-path INSERT
into partitioned tables, insert data above the high-water mark of the affected segment. This requires some additional space.
Parallel direct-path INSERT
into nonpartitioned tables requires even more space, because it creates a temporary segment for each degree of parallelism. If the nonpartitioned table is not in a locally managed tablespace in automatic segment-space management mode, you can modify the values of the NEXT
and PCTINCREASE
storage parameter and MINIMUM
EXTENT
tablespace parameter to provide sufficient (but not excess) storage for the temporary segments. Choose values for these parameters so that:
-
The size of each extent is not too small (no less than 1 MB). This setting affects the total number of extents in the object.
-
The size of each extent is not so large that the parallel
INSERT
results in wasted space on segments that are larger than necessary.
After the direct-path INSERT
operation is complete, you can reset these parameters to settings more appropriate for serial operations.
Parent topic: Additional Considerations for Direct-Path INSERT
19.4.2.5.4 Locking Considerations with Direct-Path INSERT
During direct-path INSERT
, the database obtains exclusive locks on the table (or on all partitions of a partitioned table).
As a result, users cannot perform any concurrent insert, update, or delete operations on the table, and concurrent index creation and build operations are not permitted. Concurrent queries, however, are supported, but the query will return only the information before the insert operation.
Parent topic: Additional Considerations for Direct-Path INSERT
19.4.3 Using Conventional Inserts to Load Tables
During conventional INSERT operations, the database reuses free space in the table, interleaving newly inserted data with existing data. During such operations, the database also maintains referential integrity constraints. Unlike direct-path INSERT
operations, conventional INSERT
operations do not require an exclusive lock on the table.
Several other restrictions apply to direct-path INSERT
operations that do not apply to conventional INSERT
operations. See Oracle Database SQL Language Reference for information about these restrictions.
You can perform a conventional INSERT
operation in serial mode or in parallel mode using the NOAPPEND
hint.
The following is an example of using the NOAPPEND
hint to perform a conventional INSERT
in serial mode:
INSERT /*+ NOAPPEND */ INTO sales_hist SELECT * FROM sales WHERE cust_id=8890;
The following is an example of using the NOAPPEND
hint to perform a conventional INSERT
in parallel mode:
INSERT /*+ NOAPPEND PARALLEL */ INTO sales_hist SELECT * FROM sales;
To run in parallel DML mode, the following requirements must be met:
-
You must have Oracle Enterprise Edition installed.
-
You must enable parallel DML in your session. To do this, submit the following statement:
ALTER SESSION { ENABLE | FORCE } PARALLEL DML;
-
You must meet at least one of the following requirements:
-
Specify the parallel attribute for the target table, either at create time or subsequently
-
Specify the
PARALLEL
hint for each insert operation -
Set the database initialization parameter
PARALLEL_DEGREE_POLICY
toAUTO
-
Parent topic: Loading Tables
19.4.4 Avoiding Bulk INSERT Failures with DML Error Logging
You can avoid bulk INSERT
failures by using the DML error logging feature.
- Inserting Data with DML Error Logging
When you load a table using anINSERT
statement with subquery, if an error occurs, the statement is terminated and rolled back in its entirety. This can be wasteful of time and system resources. For suchINSERT
statements, you can avoid this situation by using the DML error logging feature. - Error Logging Table Format
The error logging table has a specific format. - Creating an Error Logging Table
You can create an error logging table manually, or you can use a PL/SQL package to automatically create one for you. - Error Logging Restrictions and Caveats
Some errors are not logged in error logging tables.
Parent topic: Loading Tables
19.4.4.1 Inserting Data with DML Error Logging
When you load a table using an INSERT
statement with subquery, if an error occurs, the statement is terminated and rolled back in its entirety. This can be wasteful of time and system resources. For such INSERT
statements, you can avoid this situation by using the DML error logging feature.
To use DML error logging, you add a statement clause that specifies the name of an error logging table into which the database records errors encountered during DML operations. When you add this error logging clause to the INSERT
statement, certain types of errors no longer terminate and roll back the statement. Instead, each error is logged and the statement continues. You then take corrective action on the erroneous rows at a later time.
DML error logging works with INSERT
, UPDATE
, MERGE
, and DELETE
statements. This section focuses on INSERT
statements.
To insert data with DML error logging:
Example 19-9 Inserting Data with DML Error Logging
The following statement inserts rows into the DW_EMPL
table and logs errors to the ERR_EMPL
table. The tag 'daily_load
' is copied to each log entry. The statement terminates and rolls back if the number of errors exceeds 25.
INSERT INTO dw_empl SELECT employee_id, first_name, last_name, hire_date, salary, department_id FROM employees WHERE hire_date > sysdate - 7 LOG ERRORS INTO err_empl ('daily_load') REJECT LIMIT 25
For more examples, see Oracle Database SQL Language Reference and Oracle Database Data Warehousing Guide.
Parent topic: Avoiding Bulk INSERT Failures with DML Error Logging
19.4.4.2 Error Logging Table Format
The error logging table has a specific format.
The error logging table consists of two parts:
-
A mandatory set of columns that describe the error. For example, one column contains the Oracle error number.
Table 19-4 lists these error description columns.
-
An optional set of columns that contain data from the row that caused the error. The column names match the column names from the table being inserted into (the "DML table").
The number of columns in this part of the error logging table can be zero, one, or more, up to the number of columns in the DML table. If a column exists in the error logging table that has the same name as a column in the DML table, the corresponding data from the offending row being inserted is written to this error logging table column. If a DML table column does not have a corresponding column in the error logging table, the column is not logged. If the error logging table contains a column with a name that does not match a DML table column, the column is ignored.
Because type conversion errors are one type of error that might occur, the data types of the optional columns in the error logging table must be types that can capture any value without data loss or conversion errors. (If the optional log columns were of the same types as the DML table columns, capturing the problematic data into the log could suffer the same data conversion problem that caused the error.) The database makes a best effort to log a meaningful value for data that causes conversion errors. If a value cannot be derived,
NULL
is logged for the column. An error on insertion into the error logging table causes the statement to terminate.Table 19-5 lists the recommended error logging table column data types to use for each data type from the DML table. These recommended data types are used when you create the error logging table automatically with the
DBMS_ERRLOG
package.
Table 19-4 Mandatory Error Description Columns
Column Name | Data Type | Description |
---|---|---|
|
|
Oracle error number |
|
|
Oracle error message text |
|
|
Rowid of the row in error (for update and delete) |
|
|
Type of operation: insert ( Note: Errors from the update clause and insert clause of a |
|
|
Value of the tag supplied by the user in the error logging clause |
Table 19-5 Error Logging Table Column Data Types
DML Table Column Type | Error Logging Table Column Type | Notes |
---|---|---|
|
|
Able to log conversion errors |
|
|
Logs any value without information loss |
|
|
Logs any value without information loss |
|
|
Logs any value without information loss. Converts to character format with the default date/time format mask |
|
|
Logs any value without information loss |
|
|
Logs any rowid type |
|
Not supported |
|
User-defined types |
Not supported |
Parent topic: Avoiding Bulk INSERT Failures with DML Error Logging
19.4.4.3 Creating an Error Logging Table
You can create an error logging table manually, or you can use a PL/SQL package to automatically create one for you.
- Creating an Error Logging Table Automatically
You use theDBMS_ERRLOG
package to automatically create an error logging table. - Creating an Error Logging Table Manually
You use standard DDL to manually create the error logging table.
Parent topic: Avoiding Bulk INSERT Failures with DML Error Logging
19.4.4.3.1 Creating an Error Logging Table Automatically
You use the DBMS_ERRLOG
package to automatically create an error logging table.
The CREATE_ERROR_LOG
procedure creates an error logging table with all of the mandatory error description columns plus all of the columns from the named DML table, and performs the data type mappings shown in Table 19-5.
The following statement creates the error logging table used in the previous example.
EXECUTE DBMS_ERRLOG.CREATE_ERROR_LOG('DW_EMPL', 'ERR_EMPL');
See Oracle Database PL/SQL Packages and Types Reference for details on DBMS_ERRLOG
.
Parent topic: Creating an Error Logging Table
19.4.4.3.2 Creating an Error Logging Table Manually
You use standard DDL to manually create the error logging table.
See "Error Logging Table Format" for table structure requirements. You must include all mandatory error description columns. They can be in any order, but must be the first columns in the table.
Parent topic: Creating an Error Logging Table
19.4.4.4 Error Logging Restrictions and Caveats
Some errors are not logged in error logging tables.
Oracle Database logs the following errors during DML operations:
-
Column values that are too large
-
Constraint violations (
NOT
NULL
, unique, referential, and check constraints) -
Errors raised during trigger execution
-
Errors resulting from type conversion between a column in a subquery and the corresponding column of the table
-
Partition mapping errors
-
Certain
MERGE
operation errors (ORA-30926
: Unable to get a stable set of rows forMERGE
operation.)
Some errors are not logged, and cause the DML operation to terminate and roll back. For a list of these errors and for other DML logging restrictions, see the discussion of the error_logging_clause
in the INSERT
section of Oracle Database SQL Language Reference.
- Space Considerations
Ensure that you consider space requirements before using DML error logging. You require available space not only for the table being inserted into, but also for the error logging table. - Security
The user who issues theINSERT
statement with DML error logging must haveINSERT
privileges on the error logging table.
Parent topic: Avoiding Bulk INSERT Failures with DML Error Logging
19.4.4.4.1 Space Considerations
Ensure that you consider space requirements before using DML error logging. You require available space not only for the table being inserted into, but also for the error logging table.
Parent topic: Error Logging Restrictions and Caveats
19.4.4.4.2 Security
The user who issues the INSERT
statement with DML error logging must have INSERT
privileges on the error logging table.
See Also:
Oracle Database SQL Language Reference and Oracle Database Data Warehousing Guide for DML error logging examples.
Parent topic: Error Logging Restrictions and Caveats
19.5 Optimizing the Performance of Bulk Updates
The EXECUTE_UPDATE
procedure in the DBMS_REDEFINITION
package can optimize the performance of bulk updates to a table. Performance is optimized because the updates are not logged in the redo log.
The EXECUTE_UPDATE
procedure automatically uses the components of online table redefinition, such an interim table, a materialized view, and a materialized view log, to enable optimized bulk updates to a table. The EXECUTE_UPDATE
procedure also removes fragmentation of the affected rows and ensures that the update is atomic. If the bulk updates raise any errors, then you can use the ABORT_UPDATE
procedure to undo the changes made by the EXECUTE_UPDATE
procedure.
The following restrictions apply to the EXECUTE_UPDATE
procedure:
-
All of the restrictions that apply to online table redefinition apply to the
EXECUTE_UPDATE
procedure and theABORT_UPDATE
procedure. -
You cannot run more than one
EXECUTE_UPDATE
procedure on a table at the same time. -
While the
EXECUTE_UPDATE
procedure is running on a table, do not make DML changes on the table from a different session. These DML changes are lost when theEXECUTE_UPDATE
procedure completes. -
The table cannot have any triggers that fire on
UPDATE
statements. -
The
UPDATE
statement passed to theEXECUTE_UPDATE
procedure cannot have a table with a partition-extended name. -
The table cannot have the following user-defined types: varrays, REFs, and nested tables.
-
The table cannot have the following Oracle-supplied types:
ANYTYPE
,ANYDATASET
, URI types,SDO_TOPO_GEOMETRY
,SDO_GEORASTER
, andExpression
. -
The table cannot have the following types of columns: hidden column, virtual column, unused column, pseudocolumns, or identity column.
-
The table cannot be an object table.
-
The table cannot have a Virtual Private Database (VPD) policy.
-
The table cannot have check constraints.
-
The table cannot be enabled for row archival.
To optimize the performance of bulk updates:
Example 19-10 Performing an Optimized Bulk Update of Product Data
This example performs a bulk update on the oe.order_items
table. Specifically, it sets the unit_price
of each order item with a product_id
of 3106
to 45
. If the bulk update fails, then the ABORT_UPDATE
procedure cancels all of the changes performed by the EXECUTE_UPDATE
procedure, which returns the data to its state before the procedure was run.
DECLARE
update_stmt VARCHAR2(300) := 'UPDATE oe.order_items SET unit_price = 45
WHERE product_id = 3106';
BEGIN
DBMS_REDEFINITION.EXECUTE_UPDATE(update_stmt);
EXCEPTION
WHEN NO_DATA_FOUND THEN
DBMS_OUTPUT.PUT_LINE ('No Data found for SELECT');
DBMS_REDEFINITION.ABORT_UPDATE(update_stmt);
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE ('Reason for failure is'|| SQLERRM);
IF (SQLCODE = 100)
THEN
DBMS_REDEFINITION.ABORT_UPDATE(update_stmt);
END IF;
END;
/
Parent topic: Managing Tables
19.6 Automatically Collecting Statistics on Tables
The PL/SQL package DBMS_STATS
lets you generate and manage statistics for cost-based optimization. You can use this package to gather, modify, view, export, import, and delete statistics. You can also use this package to identify or name statistics that have been gathered.
Formerly, you enabled DBMS_STATS
to automatically gather statistics for a table by specifying the MONITORING
keyword in the CREATE
(or ALTER
) TABLE
statement. The MONITORING
and NOMONITORING
keywords have been deprecated and statistics are collected automatically. If you do specify these keywords, they are ignored.
Monitoring tracks the approximate number of INSERT
, UPDATE
, and DELETE
operations for the table since the last time statistics were gathered. Information about how many rows are affected is maintained in the SGA, until periodically (about every three hours) SMON incorporates the data into the data dictionary. This data dictionary information is made visible through the DBA_TAB_MODIFICATIONS,ALL_TAB_MODIFICATIONS
, or USER_TAB_MODIFICATIONS
views. The database uses these views to identify tables with stale statistics.
The default for the STATISTICS_LEVEL
initialization parameter is TYPICAL
, which enables automatic statistics collection. Automatic statistics collection and the DBMS_STATS
package enable the optimizer to generate accurate execution plans. Setting the STATISTICS_LEVEL
initialization parameter to BASIC
disables the collection of many of the important statistics required by Oracle Database features and functionality. To disable monitoring of all tables, set the STATISTICS_LEVEL
initialization parameter to BASIC
. Automatic statistics collection and the DBMS_STATS
package enable the optimizer to generate accurate execution plans.
See Also:
-
Oracle Database Reference for detailed information on the
STATISTICS_LEVEL
initialization parameter -
Oracle Database SQL Tuning Guide for information on managing optimizer statistics
-
Oracle Database PL/SQL Packages and Types Reference for information about using the
DBMS_STATS
package -
"About Automated Maintenance Tasks" for information on using the Scheduler to collect statistics automatically
Parent topic: Managing Tables
19.7 Altering Tables
You alter a table using the ALTER TABLE
statement. To alter a table, the table must be contained in your schema, or you must have either the ALTER
object privilege for the table or the ALTER ANY TABLE
system privilege.
Note:
Before altering a table, familiarize yourself with the consequences of doing so. The Oracle Database SQL Language Reference lists many of these consequences in the descriptions of the ALTER TABLE
clauses.
If a view, materialized view, trigger, domain index, function-based index, check constraint, function, procedure of package depends on a base table, the alteration of the base table or its columns can affect the dependent object. See "Managing Object Dependencies" for information about how the database manages dependencies.
- Reasons for Using the ALTER TABLE Statement
There are several reasons to use theALTER TABLE
statement. - Altering Physical Attributes of a Table
There are several considerations when you alter the physical attributes of a table. - Moving a Table to a New Segment or Tablespace
You can move a table to a new segment or tablespace to enable compression or to perform data maintenance. - Manually Allocating Storage for a Table
Oracle Database dynamically allocates additional extents for the data segment of a table, as required. However, perhaps you want to allocate an additional extent for a table explicitly. For example, in an Oracle Real Application Clusters environment, an extent of a table can be allocated explicitly for a specific instance. - Modifying an Existing Column Definition
Use theALTER TABLE...MODIFY
statement to modify an existing column definition. You can modify column data type, default value, column constraint, column expression (for virtual columns), column encryption, and visible/invisible property. - Adding Table Columns
To add a column to an existing table, use theALTER TABLE...ADD
statement. - Renaming Table Columns
Oracle Database lets you rename existing columns in a table. Use theRENAME COLUMN
clause of theALTER TABLE
statement to rename a column. - Dropping Table Columns
You can drop columns that are no longer needed from a table, including an index-organized table. This provides a convenient means to free space in a database, and avoids your having to export/import data then re-create indexes and constraints. - Placing a Table in Read-Only Mode
You can place a table in read-only mode with theALTER
TABLE
...READ
ONLY
statement, and return it to read/write mode with theALTER
TABLE
...READ
WRITE
statement.
Parent topic: Managing Tables
19.7.1 Reasons for Using the ALTER TABLE Statement
There are several reasons to use the ALTER TABLE
statement.
You can use the ALTER
TABLE
statement to perform any of the following actions that affect a table:
-
Modify physical characteristics (
INITRANS
or storage parameters) -
Move the table to a new segment or tablespace
-
Explicitly allocate an extent or deallocate unused space
-
Add, drop, or rename columns, or modify an existing column definition (data type, length, default value,
NOT NULL
integrity constraint, column expression (for virtual columns), and encryption properties.) -
Modify the logging attributes of the table
-
Modify the
CACHE
/NOCACHE
attributes -
Add, modify or drop integrity constraints associated with the table
-
Enable or disable integrity constraints or triggers associated with the table
-
Modify the degree of parallelism for the table
-
Rename a table
-
Put a table in read-only mode and return it to read/write mode
-
Add or modify index-organized table characteristics
-
Alter the characteristics of an external table
-
Add or modify
LOB
columns -
Add or modify object type, nested table, or varray columns
-
Modify table partitions
Starting with Oracle Database 12c, you can perform some operations on more than two partitions or subpartitions at a time, such as split partition and merge partitions operations. See Oracle Database VLDB and Partitioning Guide for information.
Many of these operations are discussed in succeeding sections.
Parent topic: Altering Tables
19.7.2 Altering Physical Attributes of a Table
There are several considerations when you alter the physical attributes of a table.
When altering the transaction entry setting INITRANS
of a table, note that a new setting for INITRANS
applies only to data blocks subsequently allocated for the table.
The storage parameters INITIAL
and MINEXTENTS
cannot be altered. All new settings for the other storage parameters (for example, NEXT
, PCTINCREASE
) affect only extents subsequently allocated for the table. The size of the next extent allocated is determined by the current values of NEXT
and PCTINCREASE
, and is not based on previous values of these parameters.
See Also:
The discussions of the physical attributes clause and the storage clause in Oracle Database SQL Language Reference
Parent topic: Altering Tables
19.7.3 Moving a Table to a New Segment or Tablespace
You can move a table to a new segment or tablespace to enable compression or to perform data maintenance.
- About Moving a Table to a New Segment or Tablespace
TheALTER TABLE...MOVE [PARTITION|SUBPARTITION]
statement enables you to move a table, partition, or subpartition to change any physical storage attribute, such as compression, or the tablespace, assuming you have the appropriate quota in the target tablespace. - Moving a Table
Use theALTER TABLE...MOVE
statement to move a table to a new segment or tablespace. - Moving a Table Partition or Subpartition Online
Use theALTER TABLE...MOVE PARTITION
statement orALTER TABLE...MOVE SUBPARTITION
statement to move a table partition or subpartition, respectively.
Parent topic: Altering Tables
19.7.3.1 About Moving a Table to a New Segment or Tablespace
The ALTER TABLE...MOVE [PARTITION|SUBPARTITION]
statement enables you to move a table, partition, or subpartition to change any physical storage attribute, such as compression, or the tablespace, assuming you have the appropriate quota in the target tablespace.
ALTER TABLE...MOVE
statements support the ONLINE
keyword, which enables data manipulation language (DML) operations to run uninterrupted on the table, partition, or subpartition that is being moved. The following statements move a table, partition, or subpartition online:
-
ALTER
TABLE
...
MOVE
...
ONLINE
-
ALTER
TABLE
...
MOVE
PARTITION
...
ONLINE
-
ALTER
TABLE
...
MOVE
SUBPARTITION
...
ONLINE
Moving a table changes the rowids of the rows in the table. If you move a table and include the ONLINE
keyword and the UPDATE INDEXES
clause, then the indexes remain usable during the move operation. If you include the UPDATE INDEXES
clause but not the ONLINE
keyword, then the indexes are usable immediately after the move operation. The UPDATE INDEXES
clause can only change the storage properties for the global indexes on the table or storage properties for the index partitions of any global partitioned index on the table. If you do not include the UPDATE INDEXES
clause, then the changes to the rowids cause the indexes on the table to be marked UNUSABLE
, and DML accessing the table using these indexes receive an ORA-01502 error. In this case, the indexes on the table must be dropped or rebuilt.
A move operation causes any statistics for the table to become invalid, and new statistics should be collected after moving the table.
If the table includes LOB
column(s), then this statement can be used to move the table along with LOB
data and LOB
index segments (associated with this table) that are explicitly specified. If not specified, then the default is to not move the LOB
data and LOB
index segments.
Parent topic: Moving a Table to a New Segment or Tablespace
19.7.3.2 Moving a Table
Use the ALTER TABLE...MOVE
statement to move a table to a new segment or tablespace.
When you use the ONLINE
keyword with this statement, data manipulation language (DML) operations can continue to run uninterrupted on the table that is being moved. If you do not include the ONLINE
keyword, then concurrent DML operations are not possible on the data in the table during the move operation.
To move a table:
-
In SQL*Plus, connect as a user with the necessary privileges to alter the table.
See Oracle Database SQL Language Reference for information about the privileges required to alter a table.
-
Run the
ALTER
TABLE
...
MOVE
statement.
Example 19-11 Moving a Table to a New Tablespace in Online Mode
The following statement moves the hr.jobs
table online to a new segment and tablespace, specifying new storage parameters. The ONLINE
keyword means that DML operations can run on the table uninterrupted during the move operation. The hr_tbs
tablespace must exist.
ALTER TABLE hr.jobs MOVE ONLINE STORAGE ( INITIAL 20K NEXT 40K MINEXTENTS 2 MAXEXTENTS 20 PCTINCREASE 0 ) TABLESPACE hr_tbs;
Example 19-12 Moving a Table and Updating the Table’s Indexes
Assume the following statements created a table and its indexes:
CREATE TABLE dept_exp (
DEPTNO NUMBER (2) NOT NULL,
DNAME VARCHAR2 (14),
LOC VARCHAR2 (13))
TABLESPACE tbs_1;
CREATE INDEX i1_deptno ON dept_exp(deptno) TABLESPACE tbs_1;
CREATE INDEX i2_dname ON dept_exp(dname) TABLESPACE tbs_1;
The following statement moves the table to a new tablespace (tbs_2
) and compresses the table. It also moves index i2_dbname
to tablespace tbs_2
and specifies that both the i1_deptno
index and the i2_dname
index are usable after the move operation.
ALTER TABLE dept_exp MOVE
COMPRESS TABLESPACE tbs_2
UPDATE INDEXES
(i1_deptno TABLESPACE tbs_1,
i2_dname TABLESPACE tbs_2);
Notice that this statement does not include the ONLINE
keyword. However, the ONLINE
keyword is supported if DML operations must be able to run on the table uninterrupted during the move operation, or if the indexes must be usable during the move operation.
Before running these statements, the tbs_1
and tbs_2
tablespaces must exist.
Parent topic: Moving a Table to a New Segment or Tablespace
19.7.3.3 Moving a Table Partition or Subpartition Online
Use the ALTER TABLE...MOVE PARTITION
statement or ALTER TABLE...MOVE SUBPARTITION
statement to move a table partition or subpartition, respectively.
When you use the ONLINE
keyword with either of these statements, DML operations can continue to run uninterrupted on the partition or subpartition that is being moved. If you do not include the ONLINE
keyword, then DML operations are not permitted on the data in the partition or subpartition until the move operation is complete.
When you include the UPDATE
INDEXES
clause, these statements maintain both local and global indexes during the move. Therefore, using the ONLINE
keyword with these statements eliminates the time it takes to regain partition performance after the move by maintaining global indexes and manually rebuilding indexes.
Some restrictions apply to moving table partitions and subpartitions. See Oracle Database SQL Language Reference for information about these restrictions.
To move a table partition or subpartition online:
-
In SQL*Plus, connect as a user with the necessary privileges to alter the table and move the partition or subpartition.
See Oracle Database SQL Language Reference for information about the required privileges.
-
Run the
ALTER
TABLE
...
MOVE
PARTITION
orALTER
TABLE
...
MOVE
SUBPARTITION
statement.
Example 19-13 Moving a Table Partition to a New Segment
The following statement moves the sales_q4_2003
partition of the sh.sales
table to a new segment with advanced row compression and index maintenance included:
ALTER TABLE sales MOVE PARTITION sales_q4_2003 ROW STORE COMPRESS ADVANCED UPDATE INDEXES ONLINE;
19.7.4 Manually Allocating Storage for a Table
Oracle Database dynamically allocates additional extents for the data segment of a table, as required. However, perhaps you want to allocate an additional extent for a table explicitly. For example, in an Oracle Real Application Clusters environment, an extent of a table can be allocated explicitly for a specific instance.
You can allocate a new extent for a table using the ALTER TABLE...ALLOCATE EXTENT
statement.
You can also explicitly deallocate unused space using the DEALLOCATE UNUSED
clause of ALTER TABLE
. This is described in "Reclaiming Unused Space".
Parent topic: Altering Tables
19.7.5 Modifying an Existing Column Definition
Use the ALTER TABLE...MODIFY
statement to modify an existing column definition. You can modify column data type, default value, column constraint, column expression (for virtual columns), column encryption, and visible/invisible property.
You can increase the length of an existing column, or decrease it, if all existing data satisfies the new length. Beginning with Oracle Database 12c, you can specify a maximum size of 32767 bytes for the VARCHAR2
, NVARCHAR2
, and RAW
data types. Before this release, the maximum size was 4000 bytes for the VARCHAR2
and NVARCHAR2
data types, and 2000 bytes for the RAW
data type. To use extended data types, set the MAX_STRING_SIZE
initialization parameter to EXTENDED
.
You can change a column from byte semantics to CHAR
semantics or vice versa. You must set the initialization parameter BLANK_TRIMMING=TRUE
to decrease the length of a non-empty CHAR
column.
If you are modifying a table to increase the length of a column of data type CHAR
, then realize that this can be a time consuming operation and can require substantial additional storage, especially if the table contains many rows. This is because the CHAR
value in each row must be blank-padded to satisfy the new column length.
If you modify the visible/invisible property of a column, then you cannot include any other column modification options in the same SQL statement.
Example 19-14 Changing the Length of a Column to a Size Larger Than 4000 Bytes
This example changes the length of the product_description
column in the oe.product_information
table to 32767 bytes.
ALTER TABLE oe.product_information MODIFY(product_description VARCHAR2(32767));
See Also:
-
Oracle Database SQL Language Reference for additional information about modifying table columns and additional restrictions
-
Oracle Database Reference for information about the
MAX_STRING_SIZE
initialization parameter
Parent topic: Altering Tables
19.7.6 Adding Table Columns
To add a column to an existing table, use the ALTER TABLE...ADD
statement.
The following statement alters the hr.admin_emp
table to add a new column named bonus
:
ALTER TABLE hr.admin_emp ADD (bonus NUMBER (7,2));
Live SQL:
View and run a related example on Oracle Live SQL at Oracle Live SQL: Creating and Modifying Tables.
If a new column is added to a table, then the column is initially NULL
unless you specify the DEFAULT
clause. If you specify the DEFAULT
clause for a nullable column for some table types, then the default value is stored as metadata, but the column itself is not populated with data. However, subsequent queries that specify the new column are rewritten so that the default value is returned in the result set. This behavior optimizes the resource usage and storage requirements for the operation.
You can add a column with a NOT
NULL
constraint only if the table does not contain any rows, or you specify a default value.
Note:
-
If you enable basic table compression on a table, then you can add columns only if you do not specify default values.
-
If you enable advanced row compression on a table, then you can add columns to that table with or without default values.
-
If the new column is a virtual column, its value is determined by its column expression. (Note that a virtual column's value is calculated only when it is queried.)
See Also:
-
Oracle Database SQL Language Reference for rules and restrictions for adding table columns
-
"Example: Creating a Table" for an example of a virtual column
Parent topic: Altering Tables
19.7.7 Renaming Table Columns
Oracle Database lets you rename existing columns in a table. Use the RENAME COLUMN
clause of the ALTER TABLE
statement to rename a column.
The new name must not conflict with the name of any existing column in the table. No other clauses are allowed with the RENAME COLUMN
clause.
The following statement renames the comm
column of the hr.admin_emp
table.
ALTER TABLE hr.admin_emp RENAME COLUMN comm TO commission;
Live SQL:
View and run a related example on Oracle Live SQL at Oracle Live SQL: Creating and Modifying Tables.
As noted earlier, altering a table column can invalidate dependent objects. However, when you rename a column, the database updates associated data dictionary tables to ensure that function-based indexes and check constraints remain valid.
Oracle Database also lets you rename column constraints. This is discussed in "Renaming Constraints".
Note:
The RENAME TO
clause of ALTER TABLE
appears similar in syntax to the RENAME COLUMN
clause, but is used for renaming the table itself.
Parent topic: Altering Tables
19.7.8 Dropping Table Columns
You can drop columns that are no longer needed from a table, including an index-organized table. This provides a convenient means to free space in a database, and avoids your having to export/import data then re-create indexes and constraints.
Note:
You cannot drop all columns from a table, nor can you drop columns from a table owned bySYS
. Any attempt to do so results in an error.
- Removing Columns from Tables
When you issue anALTER TABLE...DROP COLUMN
statement, the column descriptor and the data associated with the target column are removed from each row in the table. You can drop multiple columns with one statement. - Marking Columns Unused
If you are concerned about the length of time it could take to drop column data from all of the rows in a large table, you can use theALTER TABLE...SET UNUSED
statement. - Removing Unused Columns
TheALTER TABLE...DROP UNUSED COLUMNS
statement is the only action allowed on unused columns. It physically removes unused columns from the table and reclaims disk space. - Dropping Columns in Compressed Tables
If you enable advanced row compression on a table, then you can drop table columns. If you enable basic table compression only, then you cannot drop columns.
See Also:
Oracle Database SQL Language Reference for information about additional restrictions and options for dropping columns from a table
Parent topic: Altering Tables
19.7.8.1 Removing Columns from Tables
When you issue an ALTER TABLE...DROP COLUMN
statement, the column descriptor and the data associated with the target column are removed from each row in the table. You can drop multiple columns with one statement.
The following statements are examples of dropping columns from the hr.admin_emp
table. The first statement drops only the sal
column:
ALTER TABLE hr.admin_emp DROP COLUMN sal;
The next statement drops both the bonus
and comm
columns:
ALTER TABLE hr.admin_emp DROP (bonus, commission);
Live SQL:
View and run a related example on Oracle Live SQL at Oracle Live SQL: Creating and Modifying Tables.
Parent topic: Dropping Table Columns
19.7.8.2 Marking Columns Unused
If you are concerned about the length of time it could take to drop column data from all of the rows in a large table, you can use the ALTER TABLE...SET UNUSED
statement.
This statement marks one or more columns as unused, but does not actually remove the target column data or restore the disk space occupied by these columns. However, a column that is marked as unused is not displayed in queries or data dictionary views, and its name is removed so that a new column can reuse that name. In most cases, constraints, indexes, and statistics defined on the column are also removed. The exception is that any internal indexes for LOB columns that are marked unused are not removed.
To mark the hiredate
and mgr
columns as unused, execute the following statement:
ALTER TABLE hr.admin_emp SET UNUSED (hiredate, mgr);
Live SQL:
View and run a related example on Oracle Live SQL at Oracle Live SQL: Creating and Modifying Tables.
You can later remove columns that are marked as unused by issuing an ALTER TABLE...DROP UNUSED COLUMNS
statement. Unused columns are also removed from the target table whenever an explicit drop of any particular column or columns of the table is issued.
The data dictionary views USER_UNUSED_COL_TABS
, ALL_UNUSED_COL_TABS
, or DBA_UNUSED_COL_TABS
can be used to list all tables containing unused columns. The COUNT
field shows the number of unused columns in the table.
SELECT * FROM DBA_UNUSED_COL_TABS; OWNER TABLE_NAME COUNT --------------------------- --------------------------- ----- HR ADMIN_EMP 2
For external tables, the SET
UNUSED
statement is transparently converted into an ALTER
TABLE
DROP
COLUMN
statement. Because external tables consist of metadata only in the database, the DROP
COLUMN
statement performs equivalently to the SET
UNUSED
statement.
Parent topic: Dropping Table Columns
19.7.8.3 Removing Unused Columns
The ALTER TABLE...DROP UNUSED COLUMNS
statement is the only action allowed on unused columns. It physically removes unused columns from the table and reclaims disk space.
In the ALTER TABLE
statement that follows, the optional clause CHECKPOINT
is specified. This clause causes a checkpoint to be applied after processing the specified number of rows, in this case 250. Checkpointing cuts down on the amount of undo logs accumulated during the drop column operation to avoid a potential exhaustion of undo space.
ALTER TABLE hr.admin_emp DROP UNUSED COLUMNS CHECKPOINT 250;
Live SQL:
View and run a related example on Oracle Live SQL at Oracle Live SQL: Creating and Modifying Tables.
Parent topic: Dropping Table Columns
19.7.8.4 Dropping Columns in Compressed Tables
If you enable advanced row compression on a table, then you can drop table columns. If you enable basic table compression only, then you cannot drop columns.
See Also:
Parent topic: Dropping Table Columns
19.7.9 Placing a Table in Read-Only Mode
You can place a table in read-only mode with the ALTER
TABLE
...READ
ONLY
statement, and return it to read/write mode with the ALTER
TABLE
...READ
WRITE
statement.
An example of a table for which read-only mode makes sense is a configuration table. If your application contains configuration tables that are not modified after installation and that must not be modified by users, your application installation scripts can place these tables in read-only mode.
To place a table in read-only mode, you must have the ALTER
TABLE
privilege on the table or the ALTER
ANY
TABLE
privilege. In addition, the COMPATIBLE
initialization parameter must be set to 11.2.0
or higher.
The following example places the SALES
table in read-only mode:
ALTER TABLE SALES READ ONLY;
The following example returns the table to read/write mode:
ALTER TABLE SALES READ WRITE;
When a table is in read-only mode, operations that attempt to modify table data are disallowed. A SELECT column_list ON table_name
statement on a table must always return the same data set after a table or partition has been placed in read-only mode.
The following operations are not permitted on a read-only table:
-
All DML operations on the read-only table or on a read-only partition
-
TRUNCATE
TABLE
-
SELECT
FOR
UPDATE
-
ALTER
TABLE
RENAME
/DROP
COLUMN
-
DROP
of a read-only partition or a partition of a read only table -
ALTER
TABLE
SET
COLUMN
UNUSED
-
ALTER
TABLE
DROP
/TRUNCATE
/EXCHANGE
(
SUB
)
PARTITION
-
ALTER
TABLE
UPGRADE
INCLUDING
DATA
orALTER
TYPE
CASCADE
INCLUDING
TABLE
DATA
for a type with read-only table dependents -
Online redefinition
-
FLASHBACK
TABLE
The following operations are permitted on a read-only table:
-
SELECT
-
CREATE
/ALTER
/DROP
INDEX
-
ALTER
TABLE
ADD
/MODIFY
COLUMN
-
ALTER
TABLE
ADD
/MODIFY
/DROP
/ENABLE
/DISABLE
CONSTRAINT
-
ALTER
TABLE
for physical property changes -
ALTER
TABLE
DROP
UNUSED
COLUMNS
-
ALTER
TABLE
ADD
/COALESCE
/MERGE
/MODIFY
/MOVE
/RENAME
/SPLIT
(SUB)PARTITION
-
ALTER
TABLE
MOVE
-
ALTER
TABLE
ENABLE
ROW
MOVEMENT
andALTER
TABLE
SHRINK
-
RENAME
TABLE
andALTER
TABLE
RENAME
TO
-
DROP
TABLE
-
ALTER
TABLE
DEALLOCATE
UNUSED
-
ALTER
TABLE
ADD
/DROP
SUPPLEMENTAL
LOG
See Also:
-
Oracle Database SQL Language Reference for more information about the
ALTER
TABLE
statement -
Oracle Database VLDB and Partitioning Guide for more information about read-only partitions
Parent topic: Altering Tables
19.8 Redefining Tables Online
You can modify the logical or physical structure of a table.
- About Redefining Tables Online
In any database system, it is occasionally necessary to modify the logical or physical structure of a table to improve the performance of queries or DML, accommodate application changes, or Manage storage. You can redefine tables online with theDBMS_REDEFINITION
package. - Features of Online Table Redefinition
Online table redefinition enables you to modify a table in several different ways while the table remains online. - Privileges Required for the DBMS_REDEFINITION Package
Execute privileges on theDBMS_REDEFINITION
package are required to run subprograms in the package. Execute privileges on theDBMS_REDEFINITION
package are granted toEXECUTE_CATALOG_ROLE
. - Restrictions for Online Redefinition of Tables
Several restrictions apply to online redefinition of tables. - Performing Online Redefinition with the REDEF_TABLE Procedure
You can use theREDEF_TABLE
procedure in theDBMS_REDEFINITION
package to perform online redefinition of a table's storage properties. - Redefining Tables Online with Multiple Procedures in DBMS_REDEFINITION
You can use multiple procedures in theDBMS_REDEFINITION
package to redefine tables online. - Results of the Redefinition Process
There are several results of the redefinition process. - Performing Intermediate Synchronization
During the redefinition process, you can synchronize the interim table with the original table if there were a large number of DML statements executed on the original table. - Refreshing Dependent Materialized Views During Online Table Redefinition
To refresh dependent fast refreshable materialized views during online table redefinition, set therefresh_dep_mviews
parameter toY
in theREDEF_TABLE
procedure or theSTART_REDEF_TABLE
procedure. - Monitoring Online Table Redefinition Progress
You can query theV$ONLINE_REDEF
view to monitor the progress of an online table redefinition operation. - Restarting Online Table Redefinition After a Failure
If online table redefinition fails, then you can check theDBA_REDEFINITION_STATUS
view to see the error information and restartable information. - Rolling Back Online Table Redefinition
You can enable roll back of a table after online table redefinition to return the table to its original definition and preserve DML changes made to the table. - Terminating Online Table Redefinition and Cleaning Up After Errors
You can terminate the online redefinition process. Doing so drops temporary logs and tables associated with the redefinition process. After this procedure is called, you can drop the interim table and its dependent objects. - Online Redefinition of One or More Partitions
You can redefine online one or more partitions of a table. This is useful if, for example, you want to move partitions to a different tablespace and keep the partitions available for DML during the operation. - Online Table Redefinition Examples
Examples illustrate online redefinition of tables.
Parent topic: Managing Tables
19.8.1 About Redefining Tables Online
In any database system, it is occasionally necessary to modify the logical or physical structure of a table to improve the performance of queries or DML, accommodate application changes, or Manage storage. You can redefine tables online with the DBMS_REDEFINITION
package.
Oracle Database provides a mechanism to make table structure modifications without significantly affecting the availability of the table. The mechanism is called online table redefinition. Redefining tables online provides a substantial increase in availability compared to traditional methods of redefining tables.
When a table is redefined online, it is accessible to both queries and DML during much of the redefinition process. Typically, the table is locked in the exclusive mode only during a very small window that is independent of the size of the table and complexity of the redefinition, and that is completely transparent to users. However, if there are many concurrent DML operations during redefinition, then a longer wait might be necessary before the table can be locked.
Online table redefinition requires an amount of free space that is approximately equivalent to the space used by the table being redefined. More space may be required if new columns are added.
You can perform online table redefinition with the Oracle Enterprise Manager Cloud Control (Cloud Control) Reorganize Objects wizard or with the DBMS_REDEFINITION
package.
Note:
To invoke the Reorganize Objects wizard:
-
On the Tables page of Cloud Control, click in the Select column to select the table to redefine.
-
In the Actions list, select Reorganize.
-
Click Go.
See Also:
Oracle Database PL/SQL Packages and Types Reference for a description of the DBMS_REDEFINITION
package
Parent topic: Redefining Tables Online
19.8.2 Features of Online Table Redefinition
Online table redefinition enables you to modify a table in several different ways while the table remains online.
Online table redefinition enables you to:
-
Modify the storage parameters of a table or cluster
-
Move a table or cluster to a different tablespace
Note:
If it is not important to keep a table available for DML when moving it to another tablespace, then you can use the simpler
ALTER
TABLE
MOVE
command. See "Moving a Table to a New Segment or Tablespace". -
Add, modify, or drop one or more columns in a table or cluster
-
Add or drop partitioning support (non-clustered tables only)
-
Change partition structure
-
Change physical properties of a single table partition or subpartition, including moving it to a different tablespace in the same schema
Starting with Oracle Database 12c, you can move a partition or subpartition online without using online table redefinition. DML operations can continue to run uninterrupted on the partition or subpartition that is being moved. See "Moving a Table to a New Segment or Tablespace".
-
Change physical properties of a materialized view log or an Oracle Database Advanced Queuing queue table
Note:
The
REDEF_TABLE
procedure in theDBMS_REDEFINITION
package does not support changing physical properties of an Oracle Database Advanced Queuing queue table. -
Add support for parallel queries
-
Re-create a table or cluster to reduce fragmentation
Note:
In many cases, online segment shrink is an easier way to reduce fragmentation. See "Reclaiming Unused Space".
-
Change the organization of a normal table (heap organized) to an index-organized table, or do the reverse.
-
Convert a relational table into a table with object columns, or do the reverse.
-
Convert an object table into a relational table or a table with object columns, or do the reverse.
-
Compress, or change the compression type for, a table, partition, index key, or LOB columns.
-
Convert LOB columns from BasicFiles LOB storage to SecureFiles LOB storage, or do the reverse.
-
You can enable roll back of a table after online table redefinition to return the table to its original definition and preserve DML changes made to the table.
-
You can refresh dependent fast refreshable materialized views during online table redefinition by setting the
refresh_dep_mviews
parameter toY
in theREDEF_TABLE
procedure or theSTART_REDEF_TABLE
procedure. -
You can query the
V$ONLINE_REDEF
view to monitor the progress of an online table redefinition operation. -
When online table redefinition fails, often you can correct the problem that caused the failure and restart the online redefinition process where it last stopped.
You can combine two or more of the usage examples above into one operation. See "Example 8" in "Online Table Redefinition Examples" for an example.
Parent topic: Redefining Tables Online
19.8.3 Privileges Required for the DBMS_REDEFINITION Package
Execute privileges on the DBMS_REDEFINITION
package are required to run subprograms in the package. Execute privileges on the DBMS_REDEFINITION
package are granted to EXECUTE_CATALOG_ROLE
.
In addition, for a user to redefine a table in the user's schema using the package, the user must be granted the following privileges:
-
CREATE
TABLE
-
CREATE
MATERIALIZED
VIEW
The CREATE TRIGGER
privilege is also required to execute the COPY_TABLE_DEPENDENTS
procedure.
For a user to redefine a table in other schemas using the package, the user must be granted the following privileges:
-
CREATE
ANY
TABLE
-
ALTER
ANY
TABLE
-
DROP
ANY
TABLE
-
LOCK
ANY TABLE
-
SELECT
ANY
TABLE
The following additional privileges are required to execute COPY_TABLE_DEPENDENTS
on tables in other schemas:
-
CREATE
ANY
TRIGGER
-
CREATE
ANY
INDEX
Parent topic: Redefining Tables Online
19.8.4 Restrictions for Online Redefinition of Tables
Several restrictions apply to online redefinition of tables.
The following restrictions apply to the online redefinition of tables:
-
If the table is to be redefined using primary key or pseudo-primary keys (unique keys or constraints with all component columns having not null constraints), then the post-redefinition table must have the same primary key or pseudo-primary key columns. If the table is to be redefined using rowids, then the table must not be an index-organized table.
-
After redefining a table that has a materialized view log, the subsequent refresh of any dependent materialized view must be a complete refresh.
There is an exception to this restriction. When online table redefinition uses the
REDEF_TABLE
orSTART_REDEF_TABLE
procedure, and therefresh_dep_mviews
parameter is set toY
in the procedure, any dependent materialized views configured for incremental refresh are refreshed during the online table redefinition operation. -
Tables that are replicated in an n-way master configuration can be redefined, but horizontal subsetting (subset of rows in the table), vertical subsetting (subset of columns in the table), and column transformations are not allowed.
-
The overflow table of an index-organized table cannot be redefined online independently.
-
Tables for which Flashback Data Archive is enabled cannot be redefined online. You cannot enable Flashback Data Archive for the interim table.
-
Tables with
LONG
columns can be redefined online, but those columns must be converted toCLOBS
. Also,LONG RAW
columns must be converted toBLOBS
. Tables withLOB
columns are acceptable. -
On a system with sufficient resources for parallel execution, and in the case where the interim table is not partitioned, redefinition of a
LONG
column to aLOB
column can be executed in parallel, provided that:-
The segment used to store the
LOB
column in the interim table belongs to a locally managed tablespace with Automatic Segment Space Management (ASSM) enabled. -
There is a simple mapping from one
LONG
column to oneLOB
column, and the interim table has only oneLOB
column.
In the case where the interim table is partitioned, the normal methods for parallel execution for partitioning apply.
-
-
Tables in the
SYS
andSYSTEM
schema cannot be redefined online. -
Temporary tables cannot be redefined.
-
A subset of rows in the table cannot be redefined.
-
Only simple deterministic expressions, sequences, and
SYSDATE
can be used when mapping the columns in the interim table to those of the original table. For example, subqueries are not allowed. -
If new columns are being added as part of the redefinition and there are no column mappings for these columns, then they must not be declared
NOT
NULL
until the redefinition is complete. -
There cannot be any referential constraints between the table being redefined and the interim table.
-
Table redefinition cannot be done
NOLOGGING
. -
For materialized view logs and queue tables, online redefinition is restricted to changes in physical properties. No horizontal or vertical subsetting is permitted, nor are any column transformations. The only valid value for the column mapping string is
NULL
. -
You cannot perform online redefinition on a partition that includes one or more nested tables.
-
You can convert a
VARRAY
to a nested table with theCAST
operator in the column mapping. However, you cannot convert a nested table to aVARRAY
. -
When the columns in the
col_mapping
parameter of theDBMS_REDEFINITION.START_REDEF_TABLE
procedure include a sequence, theorderby_cols
parameter must beNULL
. -
For tables with a Virtual Private Database (VPD) security policy, when the
copy_vpd_opt
parameter is specified asDBMS_REDEFINITION.CONS_VPD_AUTO
, the following restrictions apply:-
The column mapping string between the original table and interim table must be
NULL
or'*'
. -
No VPD policies can exist on the interim table.
See "Handling Virtual Private Database (VPD) Policies During Online Redefinition". Also, see Oracle Database Security Guide for information about VPD policies.
-
-
Online redefinition cannot run on multiple tables concurrently in separate
DBMS_REDEFINITION
sessions if the tables are related by reference partitioning.See Oracle Database VLDB and Partitioning Guide for more information about reference partitioning.
-
Online redefinition of an object table or
XMLType
table can cause a danglingREF
in other tables if those other tables have aREF
column that references the redefined table.See Oracle Database SQL Language Reference for more information about dangling
REF
s. -
Tables that use Oracle Label Security (OLS) cannot be redefined online.
-
Tables with fine-grained access control cannot be redefined online.
-
Tables that use Oracle Real Application Security cannot be redefined online.
Parent topic: Redefining Tables Online
19.8.5 Performing Online Redefinition with the REDEF_TABLE Procedure
You can use the REDEF_TABLE
procedure in the DBMS_REDEFINITION
package to perform online redefinition of a table's storage properties.
The REDEF_TABLE
procedure enables you to perform online redefinition a table's storage properties in a single step when you want to change the following properties:
-
Tablespace changes, including a tablespace change for a table, partition, index, or LOB columns
-
Compression type changes, including a compression type change for a table, partition, index key, or LOB columns
-
For LOB columns, a change to
SECUREFILE
orBASICFILE
storage
When your online redefinition operation is not limited to these changes, you must perform online redefinition of the table using multiple steps. The steps include invoking multiple procedures in the DBMS_REDEFINITION
package, including the following procedures: CAN_REDEF_TABLE
, START_REDEF_TABLE
, COPY_TABLE_DEPENDENTS
, and FINISH_REDEF_TABLE
.
Note:
Online table redefinition rollback is not supported when theREDEF_TABLE
procedure is used to redefine a table.
See Also:
-
Oracle Database PL/SQL Packages and Types Reference for procedure details
-
"Performing Online Redefinition with Multiple Procedures in DBMS_REDEFINITION" for more information
Parent topic: Redefining Tables Online
19.8.6 Redefining Tables Online with Multiple Procedures in DBMS_REDEFINITION
You can use multiple procedures in the DBMS_REDEFINITION
package to redefine tables online.
- Performing Online Redefinition with Multiple Procedures in DBMS_REDEFINITION
You can use multiple procedures in theDBMS_REDEFINITION
package to perform online redefinition of a table. - Constructing a Column Mapping String
The column mapping string that you pass as an argument toSTART_REDEF_TABLE
contains a comma-delimited list of column mapping pairs. - Handling Virtual Private Database (VPD) Policies During Online Redefinition
If the original table being redefined has VPD policies specified for it, then you can use thecopy_vpd_opt
parameter in theSTART_REDEF_TABLE
procedure to handle these policies during online redefinition. - Creating Dependent Objects Automatically
You use theCOPY_TABLE_DEPENDENTS
procedure to automatically create dependent objects on the interim table. - Creating Dependent Objects Manually
If you manually create dependent objects on the interim table with SQL*Plus or Cloud Control, then you must use theREGISTER_DEPENDENT_OBJECT
procedure to register the dependent objects. Registering dependent objects enables the redefinition completion process to restore dependent object names to what they were before redefinition.
Parent topic: Redefining Tables Online
19.8.6.1 Performing Online Redefinition with Multiple Procedures in DBMS_REDEFINITION
You can use multiple procedures in the DBMS_REDEFINITION
package to perform online redefinition of a table.
To redefine a table online using multiple steps:
See Also:
-
Oracle Database PL/SQL Packages and Types Reference for package details
19.8.6.2 Constructing a Column Mapping String
The column mapping string that you pass as an argument to START_REDEF_TABLE
contains a comma-delimited list of column mapping pairs.
Each pair has the following syntax:
[expression] column_name
The column_name
term indicates a column in the interim table. The optional expression
can include columns from the table being redefined, constants, operators, function or method calls, and so on, in accordance with the rules for expressions in a SQL SELECT
statement. However, only simple deterministic subexpressions—that is, subexpressions whose results do not vary between one evaluation and the next—plus sequences and SYSDATE
can be used. No subqueries are permitted. In the simplest case, the expression consists of just a column name from the table being redefined.
If an expression is present, its value is placed in the designated interim table column during redefinition. If the expression is omitted, it is assumed that both the table being redefined and the interim table have a column named column_name
, and the value of that column in the table being redefined is placed in the same column in the interim table.
For example, if the override
column in the table being redefined is to be renamed to override_commission
, and every override commission is to be raised by 2%, the correct column mapping pair is:
override*1.02 override_commission
If you supply '*
' or NULL
as the column mapping string, it is assumed that all the columns (with their names unchanged) are to be included in the interim table. Otherwise, only those columns specified explicitly in the string are considered. The order of the column mapping pairs is unimportant.
For examples of column mapping strings, see "Online Table Redefinition Examples".
Data Conversions
When mapping columns, you can convert data types, with some restrictions.
If you provide '*
' or NULL
as the column mapping string, only the implicit conversions permitted by SQL are supported. For example, you can convert from CHAR
to VARCHAR2
, from INTEGER
to NUMBER
, and so on.
To perform other data type conversions, including converting from one object type to another or one collection type to another, you must provide a column mapping pair with an expression that performs the conversion. The expression can include the CAST
function, built-in functions like TO_NUMBER
, conversion functions that you create, and so on.
19.8.6.3 Handling Virtual Private Database (VPD) Policies During Online Redefinition
If the original table being redefined has VPD policies specified for it, then you can use the copy_vpd_opt
parameter in the START_REDEF_TABLE
procedure to handle these policies during online redefinition.
You can specify the following values for this parameter:
Parameter Value | Description |
---|---|
|
Specify this value if there are no VPD policies on the original table. This value is the default. If this value is specified, and VPD policies exist for the original table, then an error is raised. |
|
Specify this value to copy the VPD policies automatically from the original table to the new table during online redefinition. |
|
Specify this value to copy the VPD policies manually from the original table to the new table during online redefinition. |
If there are no VPD policies specified for the original table, then specify the default value of DBMS_REDEFINITION.CONS_VPD_NONE
for the copy_vpd_opt
parameter.
Specify DBMS_REDEFINITION.CONS_VPD_AUTO
for the copy_vpd_opt
parameter when the column names and column types are the same for the original table and the interim table. To use this value, the column mapping string between original table and interim table must be NULL
or '*'
. When you use DBMS_REDEFINITION.CONS_VPD_AUTO
for the copy_vpd_opt
parameter, only the table owner and the user invoking online redefinition can access the interim table during online redefinition.
Specify DBMS_REDEFINITION.CONS_VPD_MANUAL
for the copy_vpd_opt
parameter when either of the following conditions are true:
-
There are VPD policies specified for the original table, and there are column mappings between the original table and the interim table.
-
You want to add or modify VPD policies during online redefinition of the table.
To copy the VPD policies manually, you specify the VPD policies for the interim table before you run the START_REDEF_TABLE
procedure. When online redefinition of the table is complete, the redefined table has the modified policies.
See Also:
-
"Restrictions for Online Redefinition of Tables" for restrictions related to tables with VPD policies
-
"Online Table Redefinition Examples" for an example that redefines a table with VPD policies
19.8.6.4 Creating Dependent Objects Automatically
You use the COPY_TABLE_DEPENDENTS
procedure to automatically create dependent objects on the interim table.
You can discover if errors occurred while copying dependent objects by checking the num_errors
output argument. If the ignore_errors
argument is set to TRUE
, the COPY_TABLE_DEPENDENTS
procedure continues copying dependent objects even if an error is encountered when creating an object. You can view these errors by querying the DBA_REDEFINITION_ERRORS
view.
Reasons for errors include:
-
A lack of system resources
-
A change in the logical structure of the table that would require recoding the dependent object.
See Example 3 in "Online Table Redefinition Examples" for a discussion of this type of error.
If ignore_errors
is set to FALSE
, the COPY_TABLE_DEPENDENTS
procedure stops copying objects as soon as any error is encountered.
After you correct any errors you can again attempt to copy the dependent objects by reexecuting the COPY_TABLE_DEPENDENTS
procedure. Optionally you can create the objects manually and then register them as explained in "Creating Dependent Objects Manually". The COPY_TABLE_DEPENDENTS
procedure can be used multiple times as necessary. If an object has already been successfully copied, it is not copied again.
19.8.6.5 Creating Dependent Objects Manually
If you manually create dependent objects on the interim table with SQL*Plus or Cloud Control, then you must use the REGISTER_DEPENDENT_OBJECT
procedure to register the dependent objects. Registering dependent objects enables the redefinition completion process to restore dependent object names to what they were before redefinition.
The following are examples changes that require you to create dependent objects manually:
-
Moving an index to another tablespace
-
Modifying the columns of an index
-
Modifying a constraint
-
Modifying a trigger
-
Modifying a materialized view log
When you run the REGISTER_DEPENDENT_OBJECT
procedure, you must specify that type of the dependent object with the dep_type
parameter. You can specify the following constants in this parameter:
-
DEMS_REDEFINITION.CONS_INDEX
when the dependent object is an index -
DEMS_REDEFINITION.CONS_CONSTRAINT
when the dependent object type is a constraint -
DEMS_REDEFINITION.CONS_TRIGGER
when the dependent object is a trigger -
DEMS_REDEFINITION.CONS_MVLOG
when the dependent object is a materialized view log
You would also use the REGISTER_DEPENDENT_OBJECT
procedure if the COPY_TABLE_DEPENDENTS
procedure failed to copy a dependent object and manual intervention is required.
You can query the DBA_REDEFINITION_OBJECTS
view to determine which dependent objects are registered. This view shows dependent objects that were registered explicitly with the REGISTER_DEPENDENT_OBJECT
procedure or implicitly with the COPY_TABLE_DEPENDENTS
procedure. Only current information is shown in the view.
The UNREGISTER_DEPENDENT_OBJECT
procedure can be used to unregister a dependent object on the table being redefined and on the interim table.
Note:
-
Manually created dependent objects do not have to be identical to their corresponding original dependent objects. For example, when manually creating a materialized view log on the interim table, you can log different columns. In addition, the interim table can have more or fewer dependent objects.
-
If the table being redefined includes named LOB segments, then the LOB segment names are replaced by system-generated names during online redefinition. To avoid this, you can create the interim table with new LOB segment names.
See Also:
Example 4 in "Online Table Redefinition Examples" for an example that registers a dependent object
19.8.7 Results of the Redefinition Process
There are several results of the redefinition process.
The following are the end results of the redefinition process:
-
The original table is redefined with the columns, indexes, constraints, grants, triggers, and statistics of the interim table, assuming that either
REDEF_TABLE
orCOPY_TABLE_DEPENDENTS
was used. -
Dependent objects that were registered, either explicitly using
REGISTER_DEPENDENT_OBJECT
or implicitly usingCOPY_TABLE_DEPENDENTS
, are renamed automatically so that dependent object names on the redefined table are the same as before redefinition.Note:
If no registration is done or no automatic copying is done, then you must manually rename the dependent objects.
-
The referential constraints involving the interim table now involve the redefined table and are enabled.
-
Any indexes, triggers, materialized view logs, grants, and constraints defined on the original table (before redefinition) are transferred to the interim table and are dropped when the user drops the interim table. Any referential constraints involving the original table before the redefinition now involve the interim table and are disabled.
-
Some PL/SQL objects, views, synonyms, and other table-dependent objects may become invalidated. Only those objects that depend on elements of the table that were changed are invalidated. For example, if a PL/SQL procedure queries only columns of the redefined table that were unchanged by the redefinition, the procedure remains valid. See "Managing Object Dependencies" for more information about schema object dependencies.
Parent topic: Redefining Tables Online
19.8.8 Performing Intermediate Synchronization
During the redefinition process, you can synchronize the interim table with the original table if there were a large number of DML statements executed on the original table.
After the redefinition process has been started by calling START_REDEF_TABLE
and before FINISH_REDEF_TABLE
has been called, a large number of DML statements might have been executed on the original table. If you know that this is the case, then it is recommended that you periodically synchronize the interim table with the original table.
When you start an online table redefinition operation with the START_REDEF_TABLE
procedure, it creates an internal materialized view to facilitate synchronization. This internal materialized view is refreshed to synchronize the interim table with the original table.
To synchronize the interim table with the original table:
-
Run the
SYNC_INTERIM_TABLE
procedure in theDBMS_REDEFINITION
package.
Calling this procedure reduces the time taken by FINISH_REDEF_TABLE
to complete the redefinition process. There is no limit to the number of times that you can call SYNC_INTERIM_TABLE
.
The small amount of time that the original table is locked during FINISH_REDEF_TABLE
is independent of whether SYNC_INTERIM_TABLE
has been called.
Parent topic: Redefining Tables Online
19.8.9 Refreshing Dependent Materialized Views During Online Table Redefinition
To refresh dependent fast refreshable materialized views during online table redefinition, set the refresh_dep_mviews
parameter to Y
in the REDEF_TABLE
procedure or the START_REDEF_TABLE
procedure.
A dependent materialized view is any materialized view that is defined on the table being redefined. Performing a complete refresh of dependent materialized views after online table redefinition can be time consuming. You can incrementally refresh fast refreshable materialized views during online table redefinition to make the operation more efficient.
The following restrictions apply to refreshing a dependent materialized view:
-
The materialized view must be fast refreshable.
-
ROWID
materialized views are not supported. -
Materialized join views are not supported.
A complete refresh of dependent ROWID
materialized views and materialized join views is required after online table redefinition.
Example 19-15 Refreshing Dependent Materialized Views While Running the REDEF_TABLE Procedure
This example redefines thehr.employees
table to compress the table with advanced row compression and refreshes dependent materialized views.BEGIN
DBMS_REDEFINITION.REDEF_TABLE(
uname => 'HR',
tname => 'EMPLOYEES',
table_compression_type => 'ROW STORE COMPRESS ADVANCED',
refresh_dep_mviews => 'Y');
END;
/
Example 19-16 Refreshing Dependent Materialized Views While Starting with the START_REDEF_TABLE Procedure
Assume that you want to redefine the oe.orders
table. The table definition is:
CREATE TABLE oe.orders(
order_id NUMBER(12),
order_date TIMESTAMP WITH LOCAL TIME ZONE,
order_mode VARCHAR2(8),
customer_id NUMBER(6),
order_status NUMBER(2),
order_total NUMBER(8,2),
sales_rep_id NUMBER(6),
promotion_id NUMBER(6));
This example redefines the table to increase the size of the order_mode
column to 16
. The interim table definition is:
CREATE TABLE oe.int_orders(
order_id NUMBER(12),
order_date TIMESTAMP WITH LOCAL TIME ZONE,
order_mode VARCHAR2(16),
customer_id NUMBER(6),
order_status NUMBER(2),
order_total NUMBER(8,2),
sales_rep_id NUMBER(6),
promotion_id NUMBER(6));
Also assume that this table has dependent materialized views. The table has a materialized view log created with the following statement:
CREATE MATERIALIZED VIEW LOG ON oe.orders WITH PRIMARY KEY, ROWID;
The oe.orders
table has the following dependent materialized views:
CREATE MATERIALIZED VIEW oe.orders_pk REFRESH FAST AS
SELECT * FROM oe.orders;
CREATE MATERIALIZED VIEW oe.orders_rowid REFRESH FAST WITH ROWID AS
SELECT * FROM oe.orders;
The oe.orders_pk
materialized view is a fast refreshable, primary key materialized view. Therefore, it can be refreshed during online table redefinition.
The oe.orders_rowid
materialized view is fast refreshable, but it is a ROWID
materialized view. Therefore, it cannot be refreshed during online table redefinition.
Complete the following steps to perform online table redefinition on the oe.orders
table while refreshing the oe.orders_pk
materialized view:
-
Start the redefinition process.
BEGIN DBMS_REDEFINITION.START_REDEF_TABLE( uname => 'oe', orig_table => 'orders', int_table => 'int_orders', options_flag => DBMS_REDEFINITION.CONS_USE_PK, refresh_dep_mviews => 'Y'); END; /
-
Copy dependent objects. (Automatically create any triggers, indexes, materialized view logs, grants, and constraints on
oe.int_orders
.)DECLARE num_errors PLS_INTEGER; BEGIN DBMS_REDEFINITION.COPY_TABLE_DEPENDENTS( uname => 'oe', orig_table => 'orders', int_table => 'int_orders', copy_indexes => DBMS_REDEFINITION.CONS_ORIG_PARAMS, copy_triggers => TRUE, copy_constraints => TRUE, copy_privileges => TRUE, ignore_errors => TRUE, num_errors => num_errors); END; /
-
Check the redefinition status:
SELECT REDEFINITION_ID, REFRESH_DEP_MVIEWS FROM DBA_REDEFINITION_STATUS WHERE BASE_TABLE_OWNER = 'OE' AND BASE_TABLE_NAME = 'ORDERS';
-
Perform DML on the original table. For example:
INSERT INTO oe.orders VALUES(3000,sysdate,'direct',102,1,42283.2,154,NULL); COMMIT;
-
Synchronize the interim table
oe.int_orders
. This step refreshes the dependent materialized viewoe.orders_pk
.BEGIN DBMS_REDEFINITION.SYNC_INTERIM_TABLE( uname => 'OE', orig_table => 'ORDERS', int_table => 'INT_ORDERS'); END; /
-
Check the refresh status of the dependent materialized views for the
oe.orders
table:SELECT m.OWNER, m.MVIEW_NAME, m.STALENESS, m.LAST_REFRESH_DATE FROM ALL_MVIEWS m, ALL_MVIEW_DETAIL_RELATIONS d WHERE m.OWNER=d.OWNER AND m. MVIEW_NAME=d.MVIEW_NAME AND d.DETAILOBJ_OWNER = 'OE' AND d.DETAILOBJ_NAME = 'ORDERS';
Theoe.orders_pk
materialized view was refreshed during the previous step, so it hasFRESH
for itsSTALENESS
status. Theoe.orders_rowid
materialized view was not refreshed during the previous step, so it hasNEEDS_COMPLILE
for itsSTALENESS
status. -
Complete the redefinition.
BEGIN DBMS_REDEFINITION.FINISH_REDEF_TABLE( uname => 'OE', orig_table => 'ORDERS', int_table => 'INT_ORDERS'); END; /
You can query the
oe.orders_pk
materialized view to confirm that the new row inserted into theoe.orders
table exist in the materialized view because it was refreshed during online table redefinition.
Related Topics
Parent topic: Redefining Tables Online
19.8.10 Monitoring Online Table Redefinition Progress
You can query the V$ONLINE_REDEF
view to monitor the progress of an online table redefinition operation.
During the process of redefining a table online, some operations can take a long time to execute. While these operations are executing, you can query the V$ONLINE_REDEF
view for detailed information about the progress of the operation. For example, it can take a long time for the DBMS_REDEFINITION.START_REDEF_TABLE
procedure to load data into the interim table.
The V$ONLINE_REDEF
view provides a percentage complete value for the operation in the PROGRESS
column. This view shows the current step in the total number of steps required to complete the operation in the OPERATION
column. For example, if there are 10 steps in the operation, then this column might show Step 6 out of 10
. The view also includes a SUBOPERATION
column and a DETAILED_MESSAGE
column for more granular information about the current operation.
During the online table redefinition process, an internal materialized view is created, and this materialized view is refreshed during some operations to keep the original table and the interim table synchronized. You can check on the progress of a refresh that is run automatically during online table redefinition by querying the REFRESH_STATEMENT_SQL_ID
and REFRESH_STATEMENT
columns in the V$ONLINE_REDEF
view. You can use the SQL_ID
value returned in the REFRESH_STATEMENT_SQL_ID
column to monitor the progress of a refresh in views such as the V$SQL
view and the V$SQL_MONITOR
view.
- Connect to the database in a session that is separate from the session that is performing online table redefinition.
- Query the
V$ONLINE_REDEF
view.
Example 19-17 Monitoring Online Table Redefinition Progress
This example redefines the Oracle-supplied sh.customers
table by adding a cust_alt_phone_number
column.
CREATE TABLE customers (
cust_id NUMBER NOT NULL,
cust_first_name VARCHAR2(20) NOT NULL,
cust_last_name VARCHAR2(40) NOT NULL,
cust_gender CHAR(1) NOT NULL,
cust_year_of_birth NUMBER(4) NOT NULL,
cust_marital_status VARCHAR2(20),
cust_street_address VARCHAR2(40) NOT NULL,
cust_postal_code VARCHAR2(10) NOT NULL,
cust_city VARCHAR2(30) NOT NULL,
cust_city_id NUMBER NOT NULL,
cust_state_province VARCHAR2(40) NOT NULL,
cust_state_province_id NUMBER NOT NULL,
country_id NUMBER NOT NULL,
cust_main_phone_number VARCHAR2(25) NOT NULL,
cust_income_level VARCHAR2(30),
cust_credit_limit NUMBER,
cust_email VARCHAR2(50),
cust_total VARCHAR2(14) NOT NULL,
cust_total_id NUMBER NOT NULL,
cust_src_id NUMBER,
cust_eff_from DATE,
cust_eff_to DATE,
cust_valid VARCHAR2(1));
This table contains a large amount of data, and some of the operations in the online table redefinition process will take time. This example monitors various operations by querying the V$ONLINE_REDEF
view.
-
In SQL*Plus, connect as a user with the required privileges for performing online redefinition of a table.
Specifically, the user must have the privileges described in "Privileges Required for the DBMS_REDEFINITION Package".
-
Create an interim table
sh.int_customers
.CREATE TABLE sh.int_customers ( cust_id NUMBER NOT NULL, cust_first_name VARCHAR2(20) NOT NULL, cust_last_name VARCHAR2(40) NOT NULL, cust_gender CHAR(1) NOT NULL, cust_year_of_birth NUMBER(4) NOT NULL, cust_marital_status VARCHAR2(20), cust_street_address VARCHAR2(40) NOT NULL, cust_postal_code VARCHAR2(10) NOT NULL, cust_city VARCHAR2(30) NOT NULL, cust_city_id NUMBER NOT NULL, cust_state_province VARCHAR2(40) NOT NULL, cust_state_province_id NUMBER NOT NULL, country_id NUMBER NOT NULL, cust_main_phone_number VARCHAR2(25) NOT NULL, cust_income_level VARCHAR2(30), cust_credit_limit NUMBER, cust_email VARCHAR2(50), cust_total VARCHAR2(14) NOT NULL, cust_total_id NUMBER NOT NULL, cust_src_id NUMBER, cust_eff_from DATE, cust_eff_to DATE, cust_valid VARCHAR2(1), cust_alt_phone_number VARCHAR2(25));
-
Start the redefinition process, and monitor the progress of the operation.
BEGIN DBMS_REDEFINITION.START_REDEF_TABLE( uname => 'sh', orig_table => 'customers', int_table => 'int_customers', options_flag => DBMS_REDEFINITION.CONS_USE_PK); END; /
As this operation is running, and in a session that is separate from the session that is performing online table redefinition, query the
V$ONLINE_REDEF
view to monitor its progress:SELECT * FROM V$ONLINE_REDEF;
Output from this query might show the following:
-
START_REDEF_TABLE
forOPERATION
-
complete refresh the materialized view
forSUBOPERATION
-
step 6 out of 7
forPROGRESS
-
-
Copy dependent objects. (Automatically create any triggers, indexes, materialized view logs, grants, and constraints on
sh.int_customers
.)DECLARE num_errors PLS_INTEGER; BEGIN DBMS_REDEFINITION.COPY_TABLE_DEPENDENTS( uname => 'sh', orig_table => 'customers', int_table => 'int_customers', copy_indexes => DBMS_REDEFINITION.CONS_ORIG_PARAMS, copy_triggers => TRUE, copy_constraints => TRUE, copy_privileges => TRUE, ignore_errors => TRUE, num_errors => num_errors); END; /
As this operation is running, and in a session that is separate from the session that is performing online table redefinition, query the
V$ONLINE_REDEF
view to monitor its progress:SELECT * FROM V$ONLINE_REDEF;
Output from this query might show the following:
-
COPY_TABLE_DEPENDENTS
forOPERATION
-
copy the indexes
forSUBOPERATION
-
step 3 out of 7
forPROGRESS
Note that the
ignore_errors
argument is set toTRUE
for this call. The reason is that the interim table was created with a primary key constraint, and whenCOPY_TABLE_DEPENDENTS
attempts to copy the primary key constraint and index from the original table, errors occur. You can ignore these errors. -
-
Synchronize the interim table
hr.int_emp_redef
.BEGIN DBMS_REDEFINITION.SYNC_INTERIM_TABLE( uname => 'sh', orig_table => 'customers', int_table => 'int_customers'); END; /
-
Complete the redefinition.
BEGIN DBMS_REDEFINITION.FINISH_REDEF_TABLE( uname => 'sh', orig_table => 'customers', int_table => 'int_customers'); END; /
Parent topic: Redefining Tables Online
19.8.11 Restarting Online Table Redefinition After a Failure
If online table redefinition fails, then you can check the DBA_REDEFINITION_STATUS
view to see the error information and restartable information.
If RESTARTABLE
is Y
, then you can correct the
error and restart the online redefinition process where it last stopped. If
RESTARTABLE
is N
, you must stop the redefinition
operation.
In some cases, it is possible to restart the online redefinition of a table after a failure. Restarting the operation means that the online redefinition process begins where it stopped because of the failure, and no work is lost. For example, if a SYNC_INTERIM_TABLE
procedure call fails because of an “unable to extent table in tablespace” error, then the problem can be corrected by increasing the size of the tablespace that ran out of space and rerunning the SYNC_INTERIM_TABLE
procedure call.
If online table redefinition fails, then you can complete the following steps to restart it:
Example 19-18 SYNC_INTERIM_TABLE Procedure Call Failure
SYNC_INTERIM_TABLE
procedure call with the following error:BEGIN
DBMS_REDEFINITION.SYNC_INTERIM_TABLE('U1', 'ORIG', 'INT');
END;
/
ORA-42009: error occurred while synchronizing the redefinition
ORA-01653: unable to extend table U1.INT by 8 in tablespace my_tbs
ORA-06512: at "SYS.DBMS_REDEFINITION", line 148
ORA-06512: at "SYS.DBMS_REDEFINITION", line 2807
ORA-06512: at line 2
-
Query the
DBA_REDEFINITION_STATUS
view:SELECT BASE_TABLE_NAME, INT_TABLE_NAME, OPERATION, STATUS, RESTARTABLE, ACTION FROM DBA_REDEFINITION_STATUS; BASE_TABLE_NAME INT_OBJ_NAME OPERATION STATUS RESTARTABLE ACTION --------------- ------------ ------------------ ------- ----------- --------- ORIG INT SYNC_INTERIM_TABLE FAILED Y Fix error
The online redefinition operation can be restarted because
RESTARTABLE
isY
in the query results. To restart the operation, correct the error returned when the operation failed and restart the operation. In this example, the error is “ORA-01653: unable to extend tableU1.INT
by 8 in tablespacemy_tbs
”. -
Increase the size of the
my_tbs
tablespace by adding a data file to it:ALTER TABLESPACE my_tbs ADD DATAFILE '/u02/oracle/data/my_tbs2.dbf' SIZE 100M;
-
Rerun
SYNC_INTERIM_TABLE
procedure call:BEGIN DBMS_REDEFINITION.SYNC_INTERIM_TABLE('U1', 'ORIG', 'INT'); END; /
Example 19-19 Materialized View Log Problem
After the redefinition is started on the original table, there can be a problem with the materialized view log. For example, the materialized view log might be accidentally dropped or corrupted for some reason. In such cases, errors similar to the following are returned:
ERROR at line 1:
ORA-42010: error occurred while synchronizing the redefinition
ORA-12034: materialized view log on "HR"."T1" younger than last refresh
Assume a table that was created with the following SQL statement is being redefined:
CREATE TABLE hr.t1(
c1 NUMBER PRIMARY KEY,
c2 NUMBER)
TABLESPACE example_tbs;
Assume an interim table was created with the following SQL statement that changes the table’s tablespace:
CREATE TABLE hr.int_t1(
c1 NUMBER PRIMARY KEY,
c2 NUMBER)
TABLESPACE hr_tbs;
-
In SQL*Plus, connect as a user with the required privileges for performing online redefinition of a table.
Specifically, the user must have the privileges described in "Privileges Required for the DBMS_REDEFINITION Package".
-
Start the redefinition process.
BEGIN DBMS_REDEFINITION.START_REDEF_TABLE( uname => 'hr', orig_table => 't1', int_table => 'int_t1'); END; /
-
Drop the materialized view log on the original table.
DROP MATERIALIZED VIEW LOG ON hr.t1;
-
Create a new materialized view log on the original table.
CREATE MATERIALIZED VIEW LOG ON hr.t1 WITH COMMIT SCN PURGE IMMEDIATE ASYNCHRONOUS;
-
Synchronize the interim table
hr.int_t1
.BEGIN DBMS_REDEFINITION.SYNC_INTERIM_TABLE( uname => 'hr', orig_table => 't1', int_table => 'int_t1'); END; / BEGIN * ERROR at line 1: ORA-42010: error occurred while synchronizing the redefinition ORA-12034: materialized view log on "HR"."T1" younger than last refresh
-
Because an error was returned, check the
DBA_REDEFINITION_STATUS
view.COLUMN BASE_OBJECT_NAME FORMAT A11 COLUMN OPERATION FORMAT A10 COLUMN STATUS FORMAT A10 COLUMN RESTARTABLE FORMAT A11 COLUMN ERR_TXT FORMAT A15 COLUMN ACTION FORMAT A18 SELECT BASE_OBJECT_NAME, OPERATION, STATUS, RESTARTABLE, ERR_TXT, ACTION FROM DBA_REDEFINITION_STATUS ORDER BY BASE_TABLE_NAME, BASE_OBJECT_NAME; BASE_OBJECT OPERATION STATUS RESTARTABLE ERR_TXT ACTION ----------- ---------- ---------- ----------- --------------- ------------------ T1 SYNC_REDEF Failure N ORA-12034: mate Abort redefinition _TABLE rialized view l og on "HR"."T1" younger than l ast refresh
The online redefinition operation cannot be restarted because
RESTARTABLE
isN
in the query results, and theACTION
column indicates that the online table redefinition operation must be terminated. -
Terminate the online table redefinition operation.
BEGIN DBMS_REDEFINITION.ABORT_REDEF_TABLE( uname => 'hr', orig_table => 't1', int_table => 'int_t1'); END; /
Parent topic: Redefining Tables Online
19.8.12 Rolling Back Online Table Redefinition
You can enable roll back of a table after online table redefinition to return the table to its original definition and preserve DML changes made to the table.
- About Online Table Redefinition Rollback
After online table redefinition, you can roll back the table to its definition before online table redefinition while preserving all data manipulation language (DML) changes made to the table. - Performing Online Table Redefinition Rollback
TheROLLBACK
procedure in theDBMS_REDEFINITION
package returns a table that was redefined online to its original definition while preserving DML changes.
Parent topic: Redefining Tables Online
19.8.12.1 About Online Table Redefinition Rollback
After online table redefinition, you can roll back the table to its definition before online table redefinition while preserving all data manipulation language (DML) changes made to the table.
In some cases, you might want to undo an online redefinition of a table. For example, the performance of operations on the table might be worse after the redefinition than it was before the redefinition. In these cases, you can roll back the table to its original definition while preserving all of the DML changes made to the table after it was redefined. Online table redefinition rollback is used mainly when redefinition changes the storage characteristics of the table, and the changes unexpectedly result in degraded performance.
To enable rollback of online table redefinition, the ENABLE_ROLLBACK
parameter must be set to TRUE
in the DBMS_REDEFINITION.START_TABLE_REDEF
procedure. When this parameter is set to true, Oracle Database maintains the interim table created during redefinition after redefinition is complete. You can run the SYNC_INTERIM_TABLE
procedure to synchronize the interim table periodically to apply DML changes made to the redefined table to the interim table. An internal materialized view and materialized view log enables maintenance of the interim table. If you decide to roll back the online table redefinition, then the interim table is synchronized, and Oracle Database switches back to it so that the table has its original definition.
The following restrictions apply to online table redefinition rollback:
-
When there is no one to one mapping of the original table’s columns to interim table’s columns, there must be no operators or functions in column mappings during redefinition.
There can be operators and functions in column mappings when there is a one to one mapping of the original table’s columns to interim table’s columns.
-
When rollback is enabled for a redefinition, the table cannot be redefined again until the online table redefinition is rolled back or terminated.
Parent topic: Rolling Back Online Table Redefinition
19.8.12.2 Performing Online Table Redefinition Rollback
The ROLLBACK
procedure in the DBMS_REDEFINITION
package returns a table that was redefined online to its original definition while preserving DML changes.
To use the ROLLBACK
procedure, online table redefinition rollback must be enabled during online table redefinition. If you decide to retain the changes made by online table redefinition, then you can run the ABORT_ROLLBACK
procedure.
Example 19-20 Rolling Back Online Table Redefinition
This example illustrates online redefinition of a table by changing the storage characteristics for the table. Specifically, this example compresses the tablespace for the table during online redefinition. Assume that you want to evaluate the performance of the table after online redefinition is complete. If the table does not perform as well as expected, then you want to be able to roll back the changes made by online redefinition.
Assume that the following statements created the original tablespace and table:
CREATE TABLESPACE tst_rollback_tbs
DATAFILE 'tst_rollback_tbs.dbf' SIZE 10M
ONLINE;
CREATE TABLE hr.tst_rollback
(rllbck_id NUMBER(6) PRIMARY KEY,
rllbck_name VARCHAR2(20))
TABLESPACE tst_rollback_tbs
STORAGE (INITIAL 2M);
-
In SQL*Plus, connect as a user with the required privileges for performing online redefinition of a table.
Specifically, the user must have the privileges described in "Privileges Required for the DBMS_REDEFINITION Package".
-
Create a compressed tablespace for the interim table.
CREATE TABLESPACE tst_cmp_rollback_tbs DEFAULT ROW STORE COMPRESS ADVANCED DATAFILE 'tst_cmp_rollback_tbs.dbf' SIZE 10M ONLINE;
-
Create an interim table
hr.int_tst_rollback
.CREATE TABLE hr.int_tst_rollback (rllbck_id NUMBER(6) PRIMARY KEY, rllbck_name VARCHAR2(20)) TABLESPACE tst_cmp_rollback_tbs STORAGE (INITIAL 2M);
Ensure that the interim table uses the compressed tablespace created in the previous step.
-
Start the redefinition process.
BEGIN DBMS_REDEFINITION.START_REDEF_TABLE( uname => 'hr', orig_table => 'tst_rollback', int_table => 'int_tst_rollback', options_flag => DBMS_REDEFINITION.CONS_USE_PK, enable_rollback => TRUE); END; /
Ensure that
enable_rollback
is set toTRUE
so that the changes made by online redefinition can be rolled back. -
Copy dependent objects.
DECLARE num_errors PLS_INTEGER; BEGIN DBMS_REDEFINITION.COPY_TABLE_DEPENDENTS( uname => 'hr', orig_table => 'tst_rollback', int_table => 'int_tst_rollback', copy_indexes => DBMS_REDEFINITION.CONS_ORIG_PARAMS, copy_triggers => TRUE, copy_constraints => TRUE, copy_privileges => TRUE, ignore_errors => TRUE, num_errors => num_errors); END; /
-
Query the
DBA_REDEFINITION_ERRORS
view to check for errors.SET LONG 8000 SET PAGES 8000 COLUMN OBJECT_NAME HEADING 'Object Name' FORMAT A20 COLUMN BASE_TABLE_NAME HEADING 'Base Table Name' FORMAT A10 COLUMN DDL_TXT HEADING 'DDL That Caused Error' FORMAT A40 SELECT OBJECT_NAME, BASE_TABLE_NAME, DDL_TXT FROM DBA_REDEFINITION_ERRORS;
You can ignore errors related to the primary key and indexes.
-
Synchronize the interim table
hr.int_tst_rollback
.BEGIN DBMS_REDEFINITION.SYNC_INTERIM_TABLE( uname => 'hr', orig_table => 'tst_rollback', int_table => 'int_tst_rollback'); END; /
-
Complete the redefinition.
BEGIN DBMS_REDEFINITION.FINISH_REDEF_TABLE( uname => 'hr', orig_table => 'tst_rollback', int_table => 'int_tst_rollback'); END; /
The table
hr.tst_rollbck
is locked in the exclusive mode only for a small window toward the end of this step. After this call the tablehr.tst_rollback
is redefined such that it has all the attributes of thehr.int_tst_rollback
table. In this example, the tablespace for thehr.tst_rollbck
table is now compressed. -
During the evaluation period, you can periodically synchronize the interim table
hr.int_tst_rollback
.BEGIN DBMS_REDEFINITION.SYNC_INTERIM_TABLE( uname => 'hr', orig_table => 'tst_rollback', int_table => 'int_tst_rollback'); END; /
Synchronizing the tables updates the original table with the DML changes made to the redefined table. When you synchronize the tables periodically, a rollback operation is more efficient because fewer DML changes must be made to the original table. You can query the
STATUS
column of theDBA_REDEFINITION_STATUS
view to determine the status of the rollback operation. -
Perform one of the following actions:
-
Assume that the redefined table did not perform as well as expected, and roll back the changes made by online redefinition.
BEGIN DBMS_REDEFINITION.ROLLBACK( uname => 'hr', orig_table => 'tst_rollback', int_table => 'int_tst_rollback'); END; /
-
Assume that the redefined table performed as expected, and terminate the rollback to retain the changes made by online table redefinition and clean up the database objects that enable rollback.
BEGIN DBMS_REDEFINITION.ABORT_ROLLBACK( uname => 'hr', orig_table => 'tst_rollback', int_table => 'int_tst_rollback'); END; /
-
Parent topic: Rolling Back Online Table Redefinition
19.8.13 Terminating Online Table Redefinition and Cleaning Up After Errors
You can terminate the online redefinition process. Doing so drops temporary logs and tables associated with the redefinition process. After this procedure is called, you can drop the interim table and its dependent objects.
To terminate the online redefinition process in the event that an error is raised during the redefinition process, or if you choose to terminate the redefinition process manually:
-
Run the
ABORT_REDEF_TABLE
procedure.
If the online redefinition process must be restarted, if you do not first call ABORT_REDEF_TABLE
, then subsequent attempts to redefine the table will fail.
Note:
It is not necessary to call the ABORT_REDEF_TABLE
procedure if the redefinition process stops because the FINISH_REDEF_TABLE
procedure has timed out. The dml_lock_timeout
parameter in the FINISH_REDEF_TABLE
procedure controls the time-out period. See step 8 in "Performing Online Redefinition with Multiple Procedures in DBMS_REDEFINITION" for more information
Parent topic: Redefining Tables Online
19.8.14 Online Redefinition of One or More Partitions
You can redefine online one or more partitions of a table. This is useful if, for example, you want to move partitions to a different tablespace and keep the partitions available for DML during the operation.
You can redefine multiple partitions in a table at one time. If you do, then multiple interim tables are required during the table redefinition process. Ensure that you have enough free space and undo space to complete the table redefinition.
When you redefine multiple partitions, you can specify that the redefinition continues even if it encounters an error for a particular partition. To do so, set the continue_after_errors
parameter to TRUE
in redefinition procedures in the DBMS_REDEFINITION
package. You can check the DBA_REDEFINITION_STATUS
view to see if any errors were encountered during the redefinition process. The STATUS
column in this view shows whether the redefinition process succeeded or failed for each partition.
You can also redefine an entire table one partition at a time to reduce resource requirements. For example, to move a very large table to a different tablespace, you can move it one partition at a time to minimize the free space and undo space required to complete the move.
Redefining partitions differs from redefining a table in the following ways:
-
There is no need to copy dependent objects. It is not valid to use the
COPY_TABLE_DEPENDENTS
procedure when redefining a single partition. -
You must manually create and register any local indexes on the interim table.
-
The column mapping string for
START_REDEF_TABLE
must beNULL
.
Note:
Starting with Oracle Database 12c, you can use the simpler ALTER
TABLE
...
MOVE
PARTITION
...
ONLINE
statement to move a partition or subpartition online without using online table redefinition. DML operations can continue to run uninterrupted on the partition or subpartition that is being moved. See "Moving a Table to a New Segment or Tablespace".
- Rules for Online Redefinition of a Single Partition
The underlying mechanism for redefinition of a single partition is the exchange partition capability of the database (ALTER
TABLE
...EXCHANGE
PARTITION
).
Parent topic: Redefining Tables Online
19.8.14.1 Rules for Online Redefinition of a Single Partition
The underlying mechanism for redefinition of a single partition is the exchange partition capability of the database (ALTER
TABLE
...EXCHANGE
PARTITION
).
Rules and restrictions for online redefinition of a single partition are therefore governed by this mechanism. Here are some general restrictions:
-
No logical changes (such as adding or dropping a column) are permitted.
-
No changes to the partitioning method (such as changing from range partitioning to hash partitioning) are permitted.
Here are the rules for defining the interim table:
-
If the partition being redefined is a range, hash, or list partition, then the interim table must be nonpartitioned.
-
If the partition being redefined is a range partition of a composite range-hash partitioned table, then the interim table must be a hash partitioned table. In addition, the partitioning key of the interim table must be identical to the subpartitioning key of the range-hash partitioned table, and the number of partitions in the interim table must be identical to the number of subpartitions in the range partition being redefined.
-
If the partition being redefined is a range partition of a composite range-list partitioned table, then the interim table must be a list partitioned table. In addition, the partitioning key of the interim table must be identical to the subpartitioning key of the range-list partitioned table, and the values lists of the interim table's list partitions must exactly match the values lists of the list subpartitions in the range partition being redefined.
-
If you define the interim table as compressed, then you must use the by-key method of redefinition, not the by-rowid method.
These additional rules apply if the table being redefined is a partitioned index-organized table:
-
The interim table must also be index-organized.
-
The original and interim tables must have primary keys on the same columns, in the same order.
-
If prefix compression is enabled, then it must be enabled for both the original and interim tables, with the same prefix length.
-
Both the original and interim tables must have overflow segments, or neither can have them. Likewise for mapping tables.
See Also:
-
The section "Exchanging Partitions" in Oracle Database VLDB and Partitioning Guide
-
"Online Table Redefinition Examples" for examples that redefine tables with partitions
Parent topic: Online Redefinition of One or More Partitions
19.8.15 Online Table Redefinition Examples
Examples illustrate online redefinition of tables.
For the following examples, see Oracle Database PL/SQL Packages and Types Reference for descriptions of all DBMS_REDEFINITION
subprograms.
Example | Description |
---|---|
Redefines a table's storage properties in a single step with the |
|
Redefines a table by adding new columns and adding partitioning. |
|
Demonstrates redefinition with object data types. |
|
Demonstrates redefinition with manually registered dependent objects. |
|
Redefines multiple partitions, moving them to different tablespaces. |
|
Redefines a table with virtual private database (VPD) policies without changing the properties of any of the table's columns. |
|
Redefines a table with VPD policies and changes the properties of one of the table's columns. |
|
Redefines a table by making multiple changes using online redefinition. |
Example 1
This example illustrates online redefinition of a table's storage properties using the REDEF_TABLE
procedure.
The original table, named print_ads
, is defined in the pm
schema as follows:
Name Null? Type ----------------------------------------- -------- ---------------------------- AD_ID NUMBER(6) AD_TEXT CLOB
In this table, the LOB column ad_text
uses BasicFiles LOB storage.
An index for the table was created with the following SQL statement:
CREATE INDEX pm.print_ads_ix ON print_ads (ad_id) TABLESPACE example;
The table is redefined as follows:
-
The table is compressed with advanced row compression.
-
The table's tablespace is changed from
EXAMPLE
toNEWTBS
. This example assumes that theNEWTBS
tablespace exists. -
The index is compressed with
COMPRESS 1
compression. -
The index's tablespace is changed from
EXAMPLE
toNEWIDXTBS
. This example assumes that theNEWIDXTBS
tablespace exists. -
The LOB column in the table is compressed with
COMPRESS
HIGH
compression. -
The tablespace for the LOB column is changed from
EXAMPLE
toNEWLOBTBS
. This example assumes that theNEWLOBTBS
tablespace exists. -
The LOB column is changed to SecureFiles LOB storage.
The steps in this redefinition are illustrated below.
-
In SQL*Plus, connect as a user with the required privileges for performing online redefinition of a table.
Specifically, the user must have the privileges described in "Privileges Required for the DBMS_REDEFINITION Package".
-
Run the
REDEF_TABLE
procedure:BEGIN DBMS_REDEFINITION.REDEF_TABLE( uname => 'PM', tname => 'PRINT_ADS', table_compression_type => 'ROW STORE COMPRESS ADVANCED', table_part_tablespace => 'NEWTBS', index_key_compression_type => 'COMPRESS 1', index_tablespace => 'NEWIDXTBS', lob_compression_type => 'COMPRESS HIGH', lob_tablespace => 'NEWLOBTBS', lob_store_as => 'SECUREFILE'); END; /
Note:
If an errors occurs, then the interim table is dropped, and the REDEF_TABLE
procedure must be re-executed.
Example 2
This example illustrates online redefinition of a table by adding new columns and adding partitioning.
The original table, named emp_redef
, is defined in the hr
schema as follows:
Name Type --------- ---------------------------- EMPNO NUMBER(5) <- Primary key ENAME VARCHAR2(15) JOB VARCHAR2(10) DEPTNO NUMBER(3)
The table is redefined as follows:
-
New columns
mgr
,hiredate
,sal
, andbonus
are added. -
The new column
bonus
is initialized to 0 (zero). -
The column
deptno
has its value increased by 10. -
The redefined table is partitioned by range on
empno
.
The steps in this redefinition are illustrated below.
-
In SQL*Plus, connect as a user with the required privileges for performing online redefinition of a table.
Specifically, the user must have the privileges described in "Privileges Required for the DBMS_REDEFINITION Package".
-
Verify that the table is a candidate for online redefinition. In this case you specify that the redefinition is to be done using primary keys or pseudo-primary keys.
BEGIN DBMS_REDEFINITION.CAN_REDEF_TABLE( uname => 'hr', tname =>'emp_redef', options_flag => DBMS_REDEFINITION.CONS_USE_PK); END; /
-
Create an interim table
hr.int_emp_redef
.CREATE TABLE hr.int_emp_redef (empno NUMBER(5) PRIMARY KEY, ename VARCHAR2(15) NOT NULL, job VARCHAR2(10), mgr NUMBER(5), hiredate DATE DEFAULT (sysdate), sal NUMBER(7,2), deptno NUMBER(3) NOT NULL, bonus NUMBER (7,2) DEFAULT(0)) PARTITION BY RANGE(empno) (PARTITION emp1000 VALUES LESS THAN (1000) TABLESPACE admin_tbs, PARTITION emp2000 VALUES LESS THAN (2000) TABLESPACE admin_tbs2);
Ensure that the specified tablespaces exist.
-
Start the redefinition process.
BEGIN DBMS_REDEFINITION.START_REDEF_TABLE( uname => 'hr', orig_table => 'emp_redef', int_table => 'int_emp_redef', col_mapping => 'empno empno, ename ename, job job, deptno+10 deptno, 0 bonus', options_flag => DBMS_REDEFINITION.CONS_USE_PK); END; /
-
Copy dependent objects. (Automatically create any triggers, indexes, materialized view logs, grants, and constraints on
hr.int_emp_redef
.)DECLARE num_errors PLS_INTEGER; BEGIN DBMS_REDEFINITION.COPY_TABLE_DEPENDENTS( uname => 'hr', orig_table => 'emp_redef', int_table => 'int_emp_redef', copy_indexes => DBMS_REDEFINITION.CONS_ORIG_PARAMS, copy_triggers => TRUE, copy_constraints => TRUE, copy_privileges => TRUE, ignore_errors => TRUE, num_errors => num_errors); END; /
Note that the
ignore_errors
argument is set toTRUE
for this call. The reason is that the interim table was created with a primary key constraint, and whenCOPY_TABLE_DEPENDENTS
attempts to copy the primary key constraint and index from the original table, errors occur. You can ignore these errors, but you must run the query shown in the next step to see if there are other errors. -
Query the
DBA_REDEFINITION_ERRORS
view to check for errors.SET LONG 8000 SET PAGES 8000 COLUMN OBJECT_NAME HEADING 'Object Name' FORMAT A20 COLUMN BASE_TABLE_NAME HEADING 'Base Table Name' FORMAT A10 COLUMN DDL_TXT HEADING 'DDL That Caused Error' FORMAT A40 SELECT OBJECT_NAME, BASE_TABLE_NAME, DDL_TXT FROM DBA_REDEFINITION_ERRORS; Object Name Base Table DDL That Caused Error -------------------- ---------- ---------------------------------------- SYS_C006796 EMP_REDEF CREATE UNIQUE INDEX "HR"."TMP$$_SYS_C006 7960" ON "HR"."INT_EMP_REDEF" ("EMPNO") PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 65536 NEXT 1048576 MIN EXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GRO UPS 1 BUFFER_POOL DEFAULT) TABLESPACE "ADMIN_TBS" SYS_C006794 EMP_REDEF ALTER TABLE "HR"."INT_EMP_REDEF" MODIFY ("ENAME" CONSTRAINT "TMP$$_SYS_C0067940" NOT NULL ENABLE NOVALIDATE) SYS_C006795 EMP_REDEF ALTER TABLE "HR"."INT_EMP_REDEF" MODIFY ("DEPTNO" CONSTRAINT "TMP$$_SYS_C0067950 " NOT NULL ENABLE NOVALIDATE) SYS_C006796 EMP_REDEF ALTER TABLE "HR"."INT_EMP_REDEF" ADD CON STRAINT "TMP$$_SYS_C0067960" PRIMARY KEY ("EMPNO") USING INDEX PCTFREE 10 INITRANS 2 MAXT RANS 255 STORAGE(INITIAL 65536 NEXT 1048576 MIN EXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GRO UPS 1 BUFFER_POOL DEFAULT) TABLESPACE "ADMIN_TBS" ENABLE NOVALID ATE
These errors are caused by the existing primary key constraint on the interim table and can be ignored. Note that with this approach, the names of the primary key constraint and index on the post-redefined table are changed. An alternate approach, one that avoids errors and name changes, would be to define the interim table without a primary key constraint. In this case, the primary key constraint and index are copied from the original table.
Note:
The best approach is to define the interim table with a primary key constraint, use
REGISTER_DEPENDENT_OBJECT
to register the primary key constraint and index, and then copy the remaining dependent objects withCOPY_TABLE_DEPENDENTS
. This approach avoids errors and ensures that the redefined table always has a primary key and that the dependent object names do not change. -
(Optional) Synchronize the interim table
hr.int_emp_redef
.BEGIN DBMS_REDEFINITION.SYNC_INTERIM_TABLE( uname => 'hr', orig_table => 'emp_redef', int_table => 'int_emp_redef'); END; /
-
Complete the redefinition.
BEGIN DBMS_REDEFINITION.FINISH_REDEF_TABLE( uname => 'hr', orig_table => 'emp_redef', int_table => 'int_emp_redef'); END; /
The table
hr.emp_redef
is locked in the exclusive mode only for a small window toward the end of this step. After this call the tablehr.emp_redef
is redefined such that it has all the attributes of thehr.int_emp_redef
table.Consider specifying a non-
NULL
value for thedml_lock_timeout
parameter in this procedure. See step 8 in "Performing Online Redefinition with Multiple Procedures in DBMS_REDEFINITION" for more information. -
Wait for any long-running queries against the interim table to complete, and then drop the interim table.
Example 3
This example redefines a table to change columns into object attributes. The redefined table gets a new column that is an object type.
The original table, named customer
, is defined as follows:
Name Type ------------ ------------- CID NUMBER <- Primary key NAME VARCHAR2(30) STREET VARCHAR2(100) CITY VARCHAR2(30) STATE VARCHAR2(2) ZIP NUMBER(5)
The type definition for the new object is:
CREATE TYPE addr_t AS OBJECT ( street VARCHAR2(100), city VARCHAR2(30), state VARCHAR2(2), zip NUMBER(5, 0) ); /
Here are the steps for this redefinition:
-
In SQL*Plus, connect as a user with the required privileges for performing online redefinition of a table.
Specifically, the user must have the privileges described in "Privileges Required for the DBMS_REDEFINITION Package".
-
Verify that the table is a candidate for online redefinition. Specify that the redefinition is to be done using primary keys or pseudo-primary keys.
BEGIN DBMS_REDEFINITION.CAN_REDEF_TABLE( uname => 'steve', tname =>'customer', options_flag => DBMS_REDEFINITION.CONS_USE_PK); END; /
-
Create the interim table
int_customer
.CREATE TABLE int_customer( CID NUMBER, NAME VARCHAR2(30), ADDR addr_t);
Note that no primary key is defined on the interim table. When dependent objects are copied in step 6, the primary key constraint and index are copied.
-
Because
customer
is a very large table, specify parallel operations for the next step.ALTER SESSION FORCE PARALLEL DML PARALLEL 4; ALTER SESSION FORCE PARALLEL QUERY PARALLEL 4;
-
Start the redefinition process using primary keys.
BEGIN DBMS_REDEFINITION.START_REDEF_TABLE( uname => 'steve', orig_table => 'customer', int_table => 'int_customer', col_mapping => 'cid cid, name name, addr_t(street, city, state, zip) addr'); END; /
Note that
addr_t(street, city, state, zip)
is a call to the object constructor. -
Copy dependent objects.
DECLARE num_errors PLS_INTEGER; BEGIN DBMS_REDEFINITION.COPY_TABLE_DEPENDENTS( uname => 'steve', orig_table => 'customer', int_table => 'int_customer', copy_indexes => DBMS_REDEFINITION.CONS_ORIG_PARAMS, copy_triggers => TRUE, copy_constraints => TRUE, copy_privileges => TRUE, ignore_errors => FALSE, num_errors => num_errors, copy_statistics => TRUE); END; /
Note that for this call, the final argument indicates that table statistics are to be copied to the interim table.
-
Optionally synchronize the interim table.
BEGIN DBMS_REDEFINITION.SYNC_INTERIM_TABLE( uname => 'steve', orig_table => 'customer', int_table => 'int_customer'); END; /
-
Complete the redefinition.
BEGIN DBMS_REDEFINITION.FINISH_REDEF_TABLE( uname => 'steve', orig_table => 'customer', int_table => 'int_customer'); END; /
Consider specifying a non-
NULL
value for thedml_lock_timeout
parameter in this procedure. See step 8 in "Performing Online Redefinition with Multiple Procedures in DBMS_REDEFINITION" for more information. -
Wait for any long-running queries against the interim table to complete, and then drop the interim table.
Example 4
This example addresses the situation where a dependent object must be manually created and registered.
The table to be redefined is defined as follows:
CREATE TABLE steve.t1 (c1 NUMBER);
The table has an index for column c1:
CREATE INDEX steve.index1 ON steve.t1(c1);
Consider the case where column c1
becomes column c2
after the redefinition. In this case, COPY_TABLE_DEPENDENTS
tries to create an index on the interim table corresponding to index1
, and tries to create it on a column c1
, which does not exist in the interim table. This results in an error. You must therefore manually create the index on column c2
and register it.
Here are the steps for this redefinition:
-
In SQL*Plus, connect as a user with the required privileges for performing online redefinition of a table.
Specifically, the user must have the privileges described in "Privileges Required for the DBMS_REDEFINITION Package".
-
Ensure that
t1
is a candidate for online redefinition withCAN_REDEF_TABLE
, and then begin the redefinition process withSTART_REDEF_TABLE
.BEGIN DBMS_REDEFINITION.CAN_REDEF_TABLE( uname => 'steve', tname => 't1', options_flag => DBMS_REDEFINITION.CONS_USE_ROWID); END; /
-
Create the interim table
int_t1
and create an indexint_index1
on columnc2
.CREATE TABLE steve.int_t1 (c2 NUMBER); CREATE INDEX steve.int_index1 ON steve.int_t1(c2);
-
Start the redefinition process.
BEGIN DBMS_REDEFINITION.START_REDEF_TABLE( uname => 'steve', orig_table => 't1', int_table => 'int_t1', col_mapping => 'c1 c2', options_flag => DBMS_REDEFINITION.CONS_USE_ROWID); END; /
-
Register the original (
index1
) and interim (int_index1
) dependent objects.BEGIN DBMS_REDEFINITION.REGISTER_DEPENDENT_OBJECT( uname => 'steve', orig_table => 't1', int_table => 'int_t1', dep_type => DBMS_REDEFINITION.CONS_INDEX, dep_owner => 'steve', dep_orig_name => 'index1', dep_int_name => 'int_index1'); END; /
-
Copy the dependent objects.
DECLARE num_errors PLS_INTEGER; BEGIN DBMS_REDEFINITION.COPY_TABLE_DEPENDENTS( uname => 'steve', orig_table => 't1', int_table => 'int_t1', copy_indexes => DBMS_REDEFINITION.CONS_ORIG_PARAMS, copy_triggers => TRUE, copy_constraints => TRUE, copy_privileges => TRUE, ignore_errors => TRUE, num_errors => num_errors); END; /
-
Optionally synchronize the interim table.
BEGIN DBMS_REDEFINITION.SYNC_INTERIM_TABLE( uname => 'steve', orig_table => 't1', int_table => 'int_t1'); END; /
-
Complete the redefinition.
BEGIN DBMS_REDEFINITION.FINISH_REDEF_TABLE( uname => 'steve', orig_table => 't1', int_table => 'int_t1'); END; /
-
Wait for any long-running queries against the interim table to complete, and then drop the interim table.
Example 5
This example demonstrates redefining multiple partitions. It moves two of the partitions of a range-partitioned sales table to new tablespaces. The table containing the partitions to be redefined is defined as follows:
CREATE TABLE steve.salestable (s_productid NUMBER, s_saledate DATE, s_custid NUMBER, s_totalprice NUMBER) TABLESPACE users PARTITION BY RANGE(s_saledate) (PARTITION sal10q1 VALUES LESS THAN (TO_DATE('01-APR-2010', 'DD-MON-YYYY')), PARTITION sal10q2 VALUES LESS THAN (TO_DATE('01-JUL-2010', 'DD-MON-YYYY')), PARTITION sal10q3 VALUES LESS THAN (TO_DATE('01-OCT-2010', 'DD-MON-YYYY')), PARTITION sal10q4 VALUES LESS THAN (TO_DATE('01-JAN-2011', 'DD-MON-YYYY')));
This example moves the sal10q1
partition to the sales1
tablespace and the sal10q2
partition to the sales2
tablespace. The sal10q3
and sal10q4
partitions are not moved.
To move the partitions, the tablespaces sales1
and sales2
must exist. The following examples create these tablespaces:
CREATE TABLESPACE sales1 DATAFILE '/u02/oracle/data/sales01.dbf' SIZE 50M EXTENT MANAGEMENT LOCAL AUTOALLOCATE; CREATE TABLESPACE sales2 DATAFILE '/u02/oracle/data/sales02.dbf' SIZE 50M EXTENT MANAGEMENT LOCAL AUTOALLOCATE;
Note:
You can also complete this operation by executing two ALTER
TABLE
...
MOVE
PARTITION
...
ONLINE
statements. See "Moving a Table to a New Segment or Tablespace".
The table has a local partitioned index that is defined as follows:
CREATE INDEX steve.sales_index ON steve.salestable (s_saledate, s_productid, s_custid) LOCAL;
Here are the steps. In the following procedure calls, note the extra argument: partition name (part_name
).
-
In SQL*Plus, connect as a user with the required privileges for performing online redefinition of a table.
Specifically, the user must have the privileges described in "Privileges Required for the DBMS_REDEFINITION Package".
-
Ensure that
salestable
is a candidate for redefinition.BEGIN DBMS_REDEFINITION.CAN_REDEF_TABLE( uname => 'steve', tname => 'salestable', options_flag => DBMS_REDEFINITION.CONS_USE_ROWID, part_name => 'sal10q1, sal10q2'); END; /
-
Create the interim tables in the new tablespaces. Because this is a redefinition of a range partition, the interim tables are nonpartitioned.
CREATE TABLE steve.int_salestb1 (s_productid NUMBER, s_saledate DATE, s_custid NUMBER, s_totalprice NUMBER) TABLESPACE sales1; CREATE TABLE steve.int_salestb2 (s_productid NUMBER, s_saledate DATE, s_custid NUMBER, s_totalprice NUMBER) TABLESPACE sales2;
-
Start the redefinition process using rowid.
BEGIN DBMS_REDEFINITION.START_REDEF_TABLE( uname => 'steve', orig_table => 'salestable', int_table => 'int_salestb1, int_salestb2', col_mapping => NULL, options_flag => DBMS_REDEFINITION.CONS_USE_ROWID, part_name => 'sal10q1, sal10q2', continue_after_errors => TRUE); END; /
Notice that the
part_name
parameter specifies both of the partitions and that theint_table
parameter specifies the interim table for each partition. Also, thecontinue_after_errors
parameter is set toTRUE
so that the redefinition process continues even if it encounters an error for a particular partition. -
Manually create any local indexes on the interim tables.
CREATE INDEX steve.int_sales1_index ON steve.int_salestb1 (s_saledate, s_productid, s_custid) TABLESPACE sales1; CREATE INDEX steve.int_sales2_index ON steve.int_salestb2 (s_saledate, s_productid, s_custid) TABLESPACE sales2;
-
Optionally synchronize the interim tables.
BEGIN DBMS_REDEFINITION.SYNC_INTERIM_TABLE( uname => 'steve', orig_table => 'salestable', int_table => 'int_salestb1, int_salestb2', part_name => 'sal10q1, sal10q2', continue_after_errors => TRUE); END; /
-
Complete the redefinition.
BEGIN DBMS_REDEFINITION.FINISH_REDEF_TABLE( uname => 'steve', orig_table => 'salestable', int_table => 'int_salestb1, int_salestb2', part_name => 'sal10q1, sal10q2', continue_after_errors => TRUE); END; /
Consider specifying a non-
NULL
value for thedml_lock_timeout
parameter in this procedure. See step 8 in "Performing Online Redefinition with Multiple Procedures in DBMS_REDEFINITION" for more information. -
Wait for any long-running queries against the interim tables to complete, and then drop the interim tables.
-
(Optional) Query the
DBA_REDEFINITION_STATUS
view to ensure that the redefinition succeeded for each partition.SELECT BASE_TABLE_OWNER, BASE_TABLE_NAME, OPERATION, STATUS FROM DBA_REDEFINITION_STATUS;
If redefinition failed for any partition, then query the
DBA_REDEFINITION_ERRORS
view to determine the cause of the failure. Correct the conditions that caused the failure, and rerun online redefinition.
The following query shows that two of the partitions in the table have been moved to the new tablespaces:
SELECT PARTITION_NAME, TABLESPACE_NAME FROM DBA_TAB_PARTITIONS WHERE TABLE_NAME = 'SALESTABLE'; PARTITION_NAME TABLESPACE_NAME ------------------------------ ------------------------------ SAL10Q1 SALES1 SAL10Q2 SALES2 SAL10Q3 USERS SAL10Q4 USERS 4 rows selected.
Example 6
This example illustrates online redefinition of a table with virtual private database (VPD) policies. The example disables all triggers for a table without changing any of the column names or column types in the table.
The table to be redefined is defined as follows:
CREATE TABLE hr.employees( employee_id NUMBER(6) PRIMARY KEY, first_name VARCHAR2(20), last_name VARCHAR2(25) CONSTRAINT emp_last_name_nn NOT NULL, email VARCHAR2(25) CONSTRAINT emp_email_nn NOT NULL, phone_number VARCHAR2(20), hire_date DATE CONSTRAINT emp_hire_date_nn NOT NULL, job_id VARCHAR2(10) CONSTRAINT emp_job_nn NOT NULL, salary NUMBER(8,2), commission_pct NUMBER(2,2), manager_id NUMBER(6), department_id NUMBER(4), CONSTRAINT emp_salary_min CHECK (salary > 0), CONSTRAINT emp_email_uk UNIQUE (email));
If you installed the HR
sample schema, then this table exists in your database.
Assume that the following auth_emp_dep_100
function is created for the VPD policy:
CREATE OR REPLACE FUNCTION hr.auth_emp_dep_100( schema_var IN VARCHAR2, table_var IN VARCHAR2 ) RETURN VARCHAR2 AS return_val VARCHAR2 (400); unm VARCHAR2(30); BEGIN SELECT USER INTO unm FROM DUAL; IF (unm = 'HR') THEN return_val := NULL; ELSE return_val := 'DEPARTMENT_ID = 100'; END IF; RETURN return_val; END auth_emp_dep_100; /
The following ADD_POLICY
procedure specifies a VPD policy for the original table hr.employees
using the auth_emp_dep_100
function:
BEGIN DBMS_RLS.ADD_POLICY ( object_schema => 'hr', object_name => 'employees', policy_name => 'employees_policy', function_schema => 'hr', policy_function => 'auth_emp_dep_100', statement_types => 'select, insert, update, delete' ); END; /
In this example, the hr.employees
table is redefined to disable all of its triggers. No column names or column types are changed during redefinition. Therefore, specify DBMS_REDEFINITION.CONS_VPD_AUTO
for the copy_vpd_opt
in the START_REFEF_TABLE
procedure.
The steps in this redefinition are illustrated below.
-
In SQL*Plus, connect as a user with the required privileges for performing online redefinition of a table and the required privileges for managing VPD policies.
Specifically, the user must have the privileges described in "Privileges Required for the DBMS_REDEFINITION Package" and
EXECUTE
privilege on theDBMS_RLS
package. -
Verify that the table is a candidate for online redefinition. In this case you specify that the redefinition is to be done using primary keys or pseudo-primary keys.
BEGIN DBMS_REDEFINITION.CAN_REDEF_TABLE('hr','employees', DBMS_REDEFINITION.CONS_USE_PK); END; /
-
Create an interim table
hr.int_employees
.CREATE TABLE hr.int_employees( employee_id NUMBER(6), first_name VARCHAR2(20), last_name VARCHAR2(25), email VARCHAR2(25), phone_number VARCHAR2(20), hire_date DATE, job_id VARCHAR2(10), salary NUMBER(8,2), commission_pct NUMBER(2,2), manager_id NUMBER(6), department_id NUMBER(4));
-
Start the redefinition process.
BEGIN DBMS_REDEFINITION.START_REDEF_TABLE ( uname => 'hr', orig_table => 'employees', int_table => 'int_employees', col_mapping => NULL, options_flag => DBMS_REDEFINITION.CONS_USE_PK, orderby_cols => NULL, part_name => NULL, copy_vpd_opt => DBMS_REDEFINITION.CONS_VPD_AUTO); END; /
When the
copy_vpd_opt
parameter is set toDBMS_REDEFINITION.CONS_VPD_AUTO
, only the table owner and the user invoking online redefinition can access the interim table during online redefinition.Also, notice that the
col_mapping
parameter is set toNULL
. When thecopy_vpd_opt
parameter is set toDBMS_REDEFINITION.CONS_VPD_AUTO
, thecol_mapping
parameter must beNULL
or'*'
. See "Handling Virtual Private Database (VPD) Policies During Online Redefinition". -
Copy dependent objects. (Automatically create any triggers, indexes, materialized view logs, grants, and constraints on
hr.int_employees
.)DECLARE num_errors PLS_INTEGER; BEGIN DBMS_REDEFINITION.COPY_TABLE_DEPENDENTS( uname => 'hr', orig_table => 'employees', int_table => 'int_employees', copy_indexes => DBMS_REDEFINITION.CONS_ORIG_PARAMS, copy_triggers => TRUE, copy_constraints => TRUE, copy_privileges => TRUE, ignore_errors => FALSE, num_errors => num_errors); END; /
-
Disable all of the triggers on the interim table.
ALTER TABLE hr.int_employees DISABLE ALL TRIGGERS;
-
(Optional) Synchronize the interim table
hr.int_employees
.BEGIN DBMS_REDEFINITION.SYNC_INTERIM_TABLE( uname => 'hr', orig_table => 'employees', int_table => 'int_employees'); END; /
-
Complete the redefinition.
BEGIN DBMS_REDEFINITION.FINISH_REDEF_TABLE( uname => 'hr', orig_table => 'employees', int_table => 'int_employees'); END; /
The table
hr.employees
is locked in the exclusive mode only for a small window toward the end of this step. After this call the tablehr.employees
is redefined such that it has all the attributes of thehr.int_employees
table.Consider specifying a non-
NULL
value for thedml_lock_timeout
parameter in this procedure. See step 8 in "Performing Online Redefinition with Multiple Procedures in DBMS_REDEFINITION" for more information. -
Wait for any long-running queries against the interim table to complete, and then drop the interim table.
Example 7
This example illustrates online redefinition of a table with virtual private database (VPD) policies. The example changes the name of a column in the table.
The table to be redefined is defined as follows:
CREATE TABLE oe.orders( order_id NUMBER(12) PRIMARY KEY, order_date TIMESTAMP WITH LOCAL TIME ZONE CONSTRAINT order_date_nn NOT NULL, order_mode VARCHAR2(8), customer_id NUMBER(6) CONSTRAINT order_customer_id_nn NOT NULL, order_status NUMBER(2), order_total NUMBER(8,2), sales_rep_id NUMBER(6), promotion_id NUMBER(6), CONSTRAINT order_mode_lov CHECK (order_mode in ('direct','online')), CONSTRAINT order_total_min check (order_total >= 0));
If you installed the OE
sample schema, then this table exists in your database.
Assume that the following auth_orders
function is created for the VPD policy:
CREATE OR REPLACE FUNCTION oe.auth_orders( schema_var IN VARCHAR2, table_var IN VARCHAR2 ) RETURN VARCHAR2 AS return_val VARCHAR2 (400); unm VARCHAR2(30); BEGIN SELECT USER INTO unm FROM DUAL; IF (unm = 'OE') THEN return_val := NULL; ELSE return_val := 'SALES_REP_ID = 159'; END IF; RETURN return_val; END auth_orders; /
The following ADD_POLICY
procedure specifies a VPD policy for the original table oe.orders
using the auth_orders
function:
BEGIN DBMS_RLS.ADD_POLICY ( object_schema => 'oe', object_name => 'orders', policy_name => 'orders_policy', function_schema => 'oe', policy_function => 'auth_orders', statement_types => 'select, insert, update, delete'); END; /
In this example, the table is redefined to change the sales_rep_id
column to sale_pid
. When one or more column names or column types change during redefinition, you must specify DBMS_REDEFINITION.CONS_VPD_MANUAL
for the copy_vpd_opt
in the START_REFEF_TABLE
procedure.
The steps in this redefinition are illustrated below.
-
In SQL*Plus, connect as a user with the required privileges for performing online redefinition of a table and the required privileges for managing VPD policies.
Specifically, the user must have the privileges described in "Privileges Required for the DBMS_REDEFINITION Package" and
EXECUTE
privilege on theDBMS_RLS
package. -
Verify that the table is a candidate for online redefinition. In this case you specify that the redefinition is to be done using primary keys or pseudo-primary keys.
BEGIN DBMS_REDEFINITION.CAN_REDEF_TABLE( uname => 'oe', tname => 'orders', options_flag => DBMS_REDEFINITION.CONS_USE_PK); END; /
-
Create an interim table
oe.int_orders
.CREATE TABLE oe.int_orders( order_id NUMBER(12), order_date TIMESTAMP WITH LOCAL TIME ZONE, order_mode VARCHAR2(8), customer_id NUMBER(6), order_status NUMBER(2), order_total NUMBER(8,2), sales_pid NUMBER(6), promotion_id NUMBER(6));
Note that the
sales_rep_id
column is changed to thesales_pid
column in the interim table. -
Start the redefinition process.
BEGIN DBMS_REDEFINITION.START_REDEF_TABLE ( uname => 'oe', orig_table => 'orders', int_table => 'int_orders', col_mapping => 'order_id order_id, order_date order_date, order_mode order_mode, customer_id customer_id, order_status order_status, order_total order_total, sales_rep_id sales_pid, promotion_id promotion_id', options_flag => DBMS_REDEFINITION.CONS_USE_PK, orderby_cols => NULL, part_name => NULL, copy_vpd_opt => DBMS_REDEFINITION.CONS_VPD_MANUAL); END; /
Because a column name is different in the original table and the interim table,
DBMS_REDEFINITION.CONS_VPD_MANUAL
must be specified for thecopy_vpd_opt
parameter. See "Handling Virtual Private Database (VPD) Policies During Online Redefinition". -
Create the VPD policy on the interim table.
In this example, complete the following steps:
-
Create a new function called
auth_orders_sales_pid
for the VPD policy that specifies thesales_pid
column instead of thesales_rep_id
column:CREATE OR REPLACE FUNCTION oe.auth_orders_sales_pid( schema_var IN VARCHAR2, table_var IN VARCHAR2 ) RETURN VARCHAR2 AS return_val VARCHAR2 (400); unm VARCHAR2(30); BEGIN SELECT USER INTO unm FROM DUAL; IF (unm = 'OE') THEN return_val := NULL; ELSE return_val := 'SALES_PID = 159'; END IF; RETURN return_val; END auth_orders_sales_pid; /
-
Run the
ADD_POLICY
procedure and specify the new functionauth_orders_sales_pid
and the interim tableint_orders
:BEGIN DBMS_RLS.ADD_POLICY ( object_schema => 'oe', object_name => 'int_orders', policy_name => 'orders_policy', function_schema => 'oe', policy_function => 'auth_orders_sales_pid', statement_types => 'select, insert, update, delete'); END; /
-
-
Copy dependent objects. (Automatically create any triggers, indexes, materialized view logs, grants, and constraints on
oe.int_orders
.)DECLARE num_errors PLS_INTEGER; BEGIN DBMS_REDEFINITION.COPY_TABLE_DEPENDENTS( uname => 'oe', orig_table => 'orders', int_table => 'int_orders', copy_indexes => DBMS_REDEFINITION.CONS_ORIG_PARAMS, copy_triggers => TRUE, copy_constraints => TRUE, copy_privileges => TRUE, ignore_errors => TRUE, num_errors => num_errors); END; /
Note that the
ignore_errors
argument is set toTRUE
for this call. The reason is that the original table has an index and a constraint related to thesales_rep_id
column, and this column is changed tosales_pid
in the interim table. The next step shows the errors and describes how to create the index and the constraint on the interim table. -
Query the
DBA_REDEFINITION_ERRORS
view to check for errors.SET LONG 8000 SET PAGES 8000 COLUMN OBJECT_NAME HEADING 'Object Name' FORMAT A20 COLUMN BASE_TABLE_NAME HEADING 'Base Table Name' FORMAT A10 COLUMN DDL_TXT HEADING 'DDL That Caused Error' FORMAT A40 SELECT OBJECT_NAME, BASE_TABLE_NAME, DDL_TXT FROM DBA_REDEFINITION_ERRORS; Object Name Base Table DDL That Caused Error -------------------- ---------- ---------------------------------------- ORDERS_SALES_REP_FK ORDERS ALTER TABLE "OE"."INT_ORDERS" ADD CONSTR AINT "TMP$$_ORDERS_SALES_REP_FK1" FOREIG N KEY ("SALES_REP_ID") REFERENCES "HR"."EMPLOYEES" ("EMPLOYE E_ID") ON DELETE SET NULL DISABLE ORD_SALES_REP_IX ORDERS CREATE INDEX "OE"."TMP$$_ORD_SALES_REP_I X0" ON "OE"."INT_ORDERS" ("SALES_REP_ID" ) PCTFREE 10 INITRANS 2 MAXTRANS 255 COM PUTE STATISTICS STORAGE(INITIAL 65536 NEXT 1048576 MIN EXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GRO UPS 1 BUFFER_POOL DEFAULT) TABLESPACE "EXAMPLE" TMP$$_ORDERS_SALES_R ORDERS ALTER TABLE "OE"."INT_ORDERS" ADD CONSTR EP_FK0 AINT "TMP$$_TMP$$_ORDERS_SALES_RE0" FORE IGN KEY ("SALES_REP_ID") REFERENCES "HR"."INT_EMPLOYEES" ("EMP LOYEE_ID") ON DELETE SET NULL DISABLE
If necessary, correct the errors reported in the output.
In this example, original table has an index and a foreign key constraint on the
sales_rep_id
column. The index and the constraint could not be copied to the interim table because the name of the column changed fromsales_rep_id
tosales_pid
.To correct the problems, add the index and the constraint on the interim table by completing the following steps:
-
Add the index:
ALTER TABLE oe.int_orders ADD (CONSTRAINT orders_sales_pid_fk FOREIGN KEY (sales_pid) REFERENCES hr.employees(employee_id) ON DELETE SET NULL);
-
Add the foreign key constraint:
CREATE INDEX ord_sales_pid_ix ON oe.int_orders (sales_pid);
-
-
(Optional) Synchronize the interim table
oe.int_orders
.BEGIN DBMS_REDEFINITION.SYNC_INTERIM_TABLE( uname => 'oe', orig_table => 'orders', int_table => 'int_orders'); END; /
-
Complete the redefinition.
BEGIN DBMS_REDEFINITION.FINISH_REDEF_TABLE( uname => 'oe', orig_table => 'orders', int_table => 'int_orders'); END; /
The table
oe.orders
is locked in the exclusive mode only for a small window toward the end of this step. After this call the tableoe.orders
is redefined such that it has all the attributes of theoe.int_orders
table.Consider specifying a non-
NULL
value for thedml_lock_timeout
parameter in this procedure. See step 8 in "Performing Online Redefinition with Multiple Procedures in DBMS_REDEFINITION" for more information. -
Wait for any long-running queries against the interim table to complete, and then drop the interim table.
Example 8
This example illustrates making multiple changes to a table using online redefinition.
The table to be redefined is defined as follows:
CREATE TABLE testredef.original( col1 NUMBER PRIMARY KEY, col2 VARCHAR2(10), col3 CLOB, col4 DATE) ORGANIZATION INDEX;
The table is redefined as follows:
-
The table is compressed with advanced row compression.
-
The LOB column is changed to SecureFiles LOB storage.
-
The table's tablespace is changed from
example
totestredeftbs
, and the table's block size is changed from 8KB to 16KB.This example assumes that the database block size is 8KB. This example also assumes that the
DB_16K_CACHE_SIZE
initialization parameter is set and that thetestredef
tablespace was created with a 16KB block size. For example:CREATE TABLESPACE testredeftbs DATAFILE '/u01/app/oracle/oradata/testredef01.dbf' SIZE 500M EXTENT MANAGEMENT LOCAL AUTOALLOCATE SEGMENT SPACE MANAGEMENT AUTO BLOCKSIZE 16384;
-
The table is partitioned on the
col1
column. -
The
col5
column is added. -
The
col2
column is dropped. -
Columns
col3
andcol4
are renamed, and their position in the table is changed. -
The type of the
col3
column is changed fromDATE
toTIMESTAMP
. -
The table is changed from an index-organized table (IOT) to a heap-organized table.
-
The table is defragmented.
To demonstrate defragmentation, the table must be populated. For the purposes of this example, you can use this PL/SQL block to populate the table:
DECLARE V_CLOB CLOB; BEGIN FOR I IN 0..999 LOOP V_CLOB := NULL; FOR J IN 1..1000 LOOP V_CLOB := V_CLOB||TO_CHAR(I,'0000'); END LOOP; INSERT INTO testredef.original VALUES(I,TO_CHAR(I),V_CLOB,SYSDATE+I); COMMIT; END LOOP; COMMIT; END; /
Run the following SQL statement to fragment the table by deleting every third row:
DELETE FROM testredef.original WHERE (COL1/3) <> TRUNC(COL1/3);
You can confirm the fragmentation by using the
DBMS_SPACE.SPACE_USAGE
procedure.See Also:
Oracle Database PL/SQL Packages and Types Reference for more information about the
DBMS_SPACE.SPACE_USAGE
procedure
The steps in this redefinition are illustrated below.
-
In SQL*Plus, connect as a user with the required privileges for performing online redefinition of a table.
Specifically, the user must have the privileges described in "Privileges Required for the DBMS_REDEFINITION Package".
-
Verify that the table is a candidate for online redefinition. In this case you specify that the redefinition is to be done using primary keys or pseudo-primary keys.
BEGIN DBMS_REDEFINITION.CAN_REDEF_TABLE( uname => 'testredef', tname => 'original', options_flag => DBMS_REDEFINITION.CONS_USE_PK); END; /
-
Create an interim table
testredef.interim
.CREATE TABLE testredef.interim( col1 NUMBER, col3 TIMESTAMP, col4 CLOB, col5 VARCHAR2(3)) LOB(col4) STORE AS SECUREFILE (NOCACHE FILESYSTEM_LIKE_LOGGING) PARTITION BY RANGE (COL1) ( PARTITION par1 VALUES LESS THAN (333), PARTITION par2 VALUES LESS THAN (666), PARTITION par3 VALUES LESS THAN (MAXVALUE)) TABLESPACE testredeftbs ROW STORE COMPRESS ADVANCED;
-
Start the redefinition process.
BEGIN DBMS_REDEFINITION.START_REDEF_TABLE( uname => 'testredef', orig_table => 'original', int_table => 'interim', col_mapping => 'col1 col1, TO_TIMESTAMP(col4) col3, col3 col4', options_flag => DBMS_REDEFINITION.CONS_USE_PK); END; /
-
Copy the dependent objects.
DECLARE num_errors PLS_INTEGER; BEGIN DBMS_REDEFINITION.COPY_TABLE_DEPENDENTS( uname => 'testredef', orig_table => 'original', int_table => 'interim', copy_indexes => DBMS_REDEFINITION.CONS_ORIG_PARAMS, copy_triggers => TRUE, copy_constraints => TRUE, copy_privileges => TRUE, ignore_errors => TRUE, num_errors => num_errors); END; /
-
Optionally synchronize the interim table.
BEGIN DBMS_REDEFINITION.SYNC_INTERIM_TABLE( uname => 'testredef', orig_table => 'original', int_table => 'interim'); END; /
-
Complete the redefinition.
BEGIN DBMS_REDEFINITION.FINISH_REDEF_TABLE( uname => 'testredef', orig_table => 'original', int_table => 'interim'); END; /
See Also:
Oracle Database Sample SchemasParent topic: Redefining Tables Online
19.9 Researching and Reversing Erroneous Table Changes
To enable you to research and reverse erroneous changes to tables, Oracle Database provides a group of features that you can use to view past states of database objects or to return database objects to a previous state without using point-in-time media recovery. These features are known as Oracle Flashback features.
To research an erroneous change, you can use multiple Oracle Flashback queries to view row data at specific points in time. A more efficient approach would be to use Oracle Flashback Version Query to view all changes to a row over a period of time. With this feature, you append a VERSIONS
clause to a SELECT
statement that specifies a system change number (SCN) or timestamp range between which you want to view changes to row values. The query also can return associated metadata, such as the transaction responsible for the change.
After you identify an erroneous transaction, you can use Oracle Flashback Transaction Query to identify other changes that were made by the transaction. You can then use Oracle Flashback Transaction to reverse the erroneous transaction. (Note that Oracle Flashback Transaction must also reverse all dependent transactions—subsequent transactions involving the same rows as the erroneous transaction.) You also have the option of using Oracle Flashback Table, described in "Recovering Tables Using Oracle Flashback Table".
Note:
You must be using automatic undo management to use Oracle Flashback features. See "Introduction to Automatic Undo Management ".
See Also:
Oracle Database Development Guide for information about Oracle Flashback features.
Parent topic: Managing Tables
19.10 Recovering Tables Using Oracle Flashback Table
Oracle Flashback Table enables you to restore a table to its state as of a previous point in time.
It provides a fast, online solution for recovering a table that has been accidentally modified or deleted by a user or application. In many cases, Oracle Flashback Table eliminates the need for you to perform more complicated point-in-time recovery operations.
Oracle Flashback Table:
-
Restores all data in a specified table to a previous point in time described by a timestamp or SCN.
-
Performs the restore operation online.
-
Automatically maintains all of the table attributes, such as indexes, triggers, and constraints that are necessary for an application to function with the flashed-back table.
-
Maintains any remote state in a distributed environment. For example, all of the table modifications required by replication if a replicated table is flashed back.
-
Maintains data integrity as specified by constraints. Tables are flashed back provided none of the table constraints are violated. This includes any referential integrity constraints specified between a table included in the
FLASHBACK TABLE
statement and another table that is not included in theFLASHBACK TABLE
statement. -
Even after a flashback operation, the data in the original table is not lost. You can later revert to the original state.
Note:
You must be using automatic undo management to use Oracle Flashback Table. See "Introduction to Automatic Undo Management ".
See Also:
Oracle Database Backup and Recovery User's Guide for more information about the FLASHBACK TABLE
statement.
Parent topic: Managing Tables
19.11 Dropping Tables
To drop a table that you no longer need, use the DROP TABLE
statement.
The table must be contained in your schema or you must have the DROP ANY TABLE
system privilege.
Note:
Before dropping a table, familiarize yourself with the consequences of doing so:
-
Dropping a table removes the table definition from the data dictionary. All rows of the table are no longer accessible.
-
All indexes and triggers associated with a table are dropped.
-
All views and PL/SQL program units dependent on a dropped table remain, yet become invalid (not usable). See "Managing Object Dependencies" for information about how the database manages dependencies.
-
All synonyms for a dropped table remain, but return an error when used.
-
All extents allocated for a table that is dropped are returned to the free space of the tablespace and can be used by any other object requiring new extents or new objects. All rows corresponding to a clustered table are deleted from the blocks of the cluster. Clustered tables are the subject of Managing Clusters.
The following statement drops the hr.int_admin_emp
table:
DROP TABLE hr.int_admin_emp;
If the table to be dropped contains any primary or unique keys referenced by foreign keys of other tables and you intend to drop the FOREIGN KEY
constraints of the child tables, then include the CASCADE
clause in the DROP TABLE
statement, as shown below:
DROP TABLE hr.admin_emp CASCADE CONSTRAINTS;
When you drop a table, normally the database does not immediately release the space associated with the table. Rather, the database renames the table and places it in a recycle bin, where it can later be recovered with the FLASHBACK
TABLE
statement if you find that you dropped the table in error. If you should want to immediately release the space associated with the table at the time you issue the DROP TABLE
statement, include the PURGE
clause as shown in the following statement:
DROP TABLE hr.admin_emp PURGE;
Perhaps instead of dropping a table, you want to truncate it. The TRUNCATE
statement provides a fast, efficient method for deleting all rows from a table, but it does not affect any structures associated with the table being truncated (column definitions, constraints, triggers, and so forth) or authorizations. The TRUNCATE
statement is discussed in "Truncating Tables and Clusters".
Live SQL:
View and run a related example on Oracle Live SQL at Oracle Live SQL: Creating and Modifying Tables.
Parent topic: Managing Tables
19.12 Using Flashback Drop and Managing the Recycle Bin
When you drop a table, the database does not immediately remove the space associated with the table. The database renames the table and places it and any associated objects in a recycle bin, where, in case the table was dropped in error, it can be recovered at a later time. This feature is called Flashback Drop, and the FLASHBACK
TABLE
statement is used to restore the table.
Before discussing the use of the FLASHBACK
TABLE
statement for this purpose, it is important to understand how the recycle bin works, and how you manage its contents.
- What Is the Recycle Bin?
The recycle bin is actually a data dictionary table containing information about dropped objects. Dropped tables and any associated objects such as indexes, constraints, nested tables, and so on are not removed and still occupy space. - Enabling and Disabling the Recycle Bin
When the recycle bin is enabled, dropped tables and their dependent objects are placed in the recycle bin. When the recycle bin is disabled, dropped tables and their dependent objects are not placed in the recycle bin; they are dropped, and you must use other means to recover them (such as recovering from backup). - Viewing and Querying Objects in the Recycle Bin
Oracle Database provides two views for obtaining information about objects in the recycle bin. - Purging Objects in the Recycle Bin
If you decide that you are never going to restore an item from the recycle bin, then you can use thePURGE
statement to remove the items and their associated objects from the recycle bin and release their storage space. You need the same privileges as if you were dropping the item. - Restoring Tables from the Recycle Bin
Use theFLASHBACK
TABLE
...TO
BEFORE
DROP
statement to recover objects from the recycle bin.
Parent topic: Managing Tables
19.12.1 What Is the Recycle Bin?
The recycle bin is actually a data dictionary table containing information about dropped objects. Dropped tables and any associated objects such as indexes, constraints, nested tables, and so on are not removed and still occupy space.
They continue to count against user space quotas, until specifically purged from the recycle bin or the unlikely situation where they must be purged by the database because of tablespace space constraints.
Each user can be thought of as having their own recycle bin, because, unless a user
has the SYSDBA
privilege, the only objects that the user has access to
in the recycle bin are those that the user owns. A user can view their objects in the
recycle bin using the following statement:
SELECT * FROM RECYCLEBIN;
Only the DROP
TABLE
SQL statement places objects in the recycle bin. It adds the table and its associated objects so that they can be recovered as a group. In addition to the table itself, the associated objects that are added to the recycle bin can include the following types of objects:
-
Nested tables
-
LOB segments
-
Indexes
-
Constraints (excluding foreign key constraints)
-
Triggers
-
Clusters
When you drop a tablespace including its contents, the objects in the tablespace are not placed in the recycle bin and the database purges any entries in the recycle bin for objects located in the tablespace. The database also purges any recycle bin entries for objects in a tablespace when you drop the tablespace, not including contents, and the tablespace is otherwise empty. Likewise:
-
When you drop a user, any objects belonging to the user are not placed in the recycle bin and any objects in the recycle bin are purged.
-
When you drop a cluster, its member tables are not placed in the recycle bin and any former member tables in the recycle bin are purged.
-
When you drop a type, any dependent objects such as subtypes are not placed in the recycle bin and any former dependent objects in the recycle bin are purged.
Object Naming in the Recycle Bin
When a dropped table is moved to the recycle bin, the table and its associated objects are given system-generated names. This is necessary to avoid name conflicts that may arise if multiple tables have the same name. This could occur under the following circumstances:
-
A user drops a table, re-creates it with the same name, then drops it again.
-
Two users have tables with the same name, and both users drop their tables.
The renaming convention is as follows:
BIN$unique_id
$version
where:
-
unique_id
is a 26-character globally unique identifier for this object, which makes the recycle bin name unique across all databases -
version
is a version number assigned by the database
Parent topic: Using Flashback Drop and Managing the Recycle Bin
19.12.2 Enabling and Disabling the Recycle Bin
When the recycle bin is enabled, dropped tables and their dependent objects are placed in the recycle bin. When the recycle bin is disabled, dropped tables and their dependent objects are not placed in the recycle bin; they are dropped, and you must use other means to recover them (such as recovering from backup).
Disabling the recycle bin does not purge or otherwise affect objects already in the recycle bin. The recycle bin is enabled by default.
You enable and disable the recycle bin by changing the recyclebin
initialization parameter. This parameter is not dynamic, so a database restart is required when you change it with an ALTER
SYSTEM
statement.
To enable the recycle bin:
-
Issue one of the following statements:
ALTER SESSION SET recyclebin = ON; ALTER SYSTEM SET recyclebin = ON SCOPE = SPFILE;
-
If you used
ALTER
SYSTEM
, restart the database.
To disable the recycle bin:
-
Issue one of the following statements:
ALTER SESSION SET recyclebin = OFF; ALTER SYSTEM SET recyclebin = OFF SCOPE = SPFILE;
-
If you used
ALTER
SYSTEM
, restart the database.
See Also:
Oracle Multitenant Administrator's Guide for a description of dynamic and static initialization parameters
Parent topic: Using Flashback Drop and Managing the Recycle Bin
19.12.3 Viewing and Querying Objects in the Recycle Bin
Oracle Database provides two views for obtaining information about objects in the recycle bin.
View | Description |
---|---|
|
This view can be used by users to see their own dropped objects in the recycle bin. It has a synonym |
|
This view gives administrators visibility to all dropped objects in the recycle bin |
One use for these views is to identify the name that the database has assigned to a dropped object, as shown in the following example:
SELECT object_name, original_name FROM dba_recyclebin WHERE owner = 'HR'; OBJECT_NAME ORIGINAL_NAME ------------------------------ -------------------------------- BIN$yrMKlZaLMhfgNAgAIMenRA==$0 EMPLOYEES
You can also view the contents of the recycle bin using the SQL*Plus command SHOW RECYCLEBIN
.
SQL> show recyclebin ORIGINAL NAME RECYCLEBIN NAME OBJECT TYPE DROP TIME ---------------- ------------------------------ ------------ ------------------- EMPLOYEES BIN$yrMKlZaVMhfgNAgAIMenRA==$0 TABLE 2003-10-27:14:00:19
You can query objects that are in the recycle bin, just as you can query other objects. However, you must specify the name of the object as it is identified in the recycle bin. For example:
SELECT * FROM "BIN$yrMKlZaVMhfgNAgAIMenRA==$0";
Parent topic: Using Flashback Drop and Managing the Recycle Bin
19.12.4 Purging Objects in the Recycle Bin
If you decide that you are never going to restore an item from the recycle bin, then you can use the PURGE
statement to remove the items and their associated objects from the recycle bin and release their storage space. You need the same privileges as if you were dropping the item.
When you use the PURGE
statement to purge a table, you can use the name that the table is known by in the recycle bin or the original name of the table. The recycle bin name can be obtained from either the DBA_
or USER_RECYCLEBIN
view as shown in "Viewing and Querying Objects in the Recycle Bin". The following hypothetical example purges the table hr.int_admin_emp
, which was renamed to BIN$jsleilx392mk2=293$0
when it was placed in the recycle bin:
PURGE TABLE "BIN$jsleilx392mk2=293$0";
You can achieve the same result with the following statement:
PURGE TABLE int_admin_emp;
You can use the PURGE
statement to purge all the objects in the recycle bin that are from a specified tablespace or only the tablespace objects belonging to a specified user, as shown in the following examples:
PURGE TABLESPACE example; PURGE TABLESPACE example USER oe;
Users can purge the recycle bin of their own objects, and release space for objects, by using the following statement:
PURGE RECYCLEBIN;
If you have the SYSDBA
privilege or the PURGE
DBA_RECYCLEBIN
system privilege, then you can purge the entire recycle bin by specifying DBA_RECYCLEBIN
, instead of RECYCLEBIN
in the previous statement.
You can also use the PURGE
statement to purge an index from the recycle bin or to purge from the recycle bin all objects in a specified tablespace.
See Also:
Oracle Database SQL Language Reference for more information on the PURGE
statement
Parent topic: Using Flashback Drop and Managing the Recycle Bin
19.12.5 Restoring Tables from the Recycle Bin
Use the FLASHBACK
TABLE
... TO
BEFORE
DROP
statement to recover objects from the recycle bin.
You can specify either the name of the table in the recycle bin or the original table name. An optional RENAME TO
clause lets you rename the table as you recover it. The recycle bin name can be obtained from either the DBA_
or USER_RECYCLEBIN
view as shown in "Viewing and Querying Objects in the Recycle Bin". To use the FLASHBACK
TABLE
... TO
BEFORE
DROP
statement, you need the same privileges required to drop the table.
The following example restores int_admin_emp
table and assigns to it a new name:
FLASHBACK TABLE int_admin_emp TO BEFORE DROP RENAME TO int2_admin_emp;
The system-generated recycle bin name is very useful if you have dropped a table multiple times. For example, suppose you have three versions of the int2_admin_emp
table in the recycle bin and you want to recover the second version. You can do this by issuing two FLASHBACK TABLE
statements, or you can query the recycle bin and then flashback to the appropriate system-generated name, as shown in the following example. Including the create time in the query can help you verify that you are restoring the correct table.
SELECT object_name, original_name, createtime FROM recyclebin; OBJECT_NAME ORIGINAL_NAME CREATETIME ------------------------------ --------------- ------------------- BIN$yrMKlZaLMhfgNAgAIMenRA==$0 INT2_ADMIN_EMP 2006-02-05:21:05:52 BIN$yrMKlZaVMhfgNAgAIMenRA==$0 INT2_ADMIN_EMP 2006-02-05:21:25:13 BIN$yrMKlZaQMhfgNAgAIMenRA==$0 INT2_ADMIN_EMP 2006-02-05:22:05:53 FLASHBACK TABLE "BIN$yrMKlZaVMhfgNAgAIMenRA==$0" TO BEFORE DROP;
Restoring Dependent Objects
When you restore a table from the recycle bin, dependent objects such as indexes do not get their original names back; they retain their system-generated recycle bin names. You must manually rename dependent objects to restore their original names. If you plan to manually restore original names for dependent objects, ensure that you make note of each dependent object's system-generated recycle bin name before you restore the table.
The following is an example of restoring the original names of some of the indexes of the dropped table JOB_HISTORY
, from the HR
sample schema. The example assumes that you are logged in as the HR
user.
Parent topic: Using Flashback Drop and Managing the Recycle Bin
19.13 Managing Index-Organized Tables
An index-organized table's storage organization is a variant of a primary B-tree index. Unlike a heap-organized table, data is stored in primary key order.
- What Are Index-Organized Tables?
An index-organized table has a storage organization that is a variant of a primary B-tree. Unlike an ordinary (heap-organized) table whose data is stored as an unordered collection (heap), data for an index-organized table is stored in a B-tree index structure in a primary key sorted manner. Each leaf block in the index structure stores both the key and nonkey columns. - Creating Index-Organized Tables
Index-organized tables provide fast primary key access and high availability. - Maintaining Index-Organized Tables
Index-organized tables differ from ordinary tables only in physical organization. Logically, they are manipulated in the same manner as ordinary tables. You can specify an index-organized table just as you would specify a regular table inINSERT
,SELECT
,DELETE
, andUPDATE
statements. - Creating Secondary Indexes on Index-Organized Tables
A secondary index is an index on an index-organized table. The secondary index is an independent schema object and is stored separately from the index-organized table. - Analyzing Index-Organized Tables
Just like ordinary tables, index-organized tables are analyzed using theDBMS_STATS
package, or theANALYZE
statement. - Using the ORDER BY Clause with Index-Organized Tables
If anORDER BY
clause only references the primary key column or a prefix of it, then the optimizer avoids the sorting overhead, as the rows are returned sorted on the primary key columns. - Converting Index-Organized Tables to Regular Tables
You can convert index-organized tables to regular (heap organized) tables using the Oracle import or export utilities, or theCREATE TABLE...AS SELECT
statement.
Parent topic: Managing Tables
19.13.1 What Are Index-Organized Tables?
An index-organized table has a storage organization that is a variant of a primary B-tree. Unlike an ordinary (heap-organized) table whose data is stored as an unordered collection (heap), data for an index-organized table is stored in a B-tree index structure in a primary key sorted manner. Each leaf block in the index structure stores both the key and nonkey columns.
The structure of an index-organized table provides the following benefits:
-
Fast random access on the primary key because an index-only scan is sufficient. And, because there is no separate table storage area, changes to the table data (such as adding new rows, updating rows, or deleting rows) result only in updating the index structure.
-
Fast range access on the primary key because the rows are clustered in primary key order.
-
Lower storage requirements because duplication of primary keys is avoided. They are not stored both in the index and underlying table, as is true with heap-organized tables.
Index-organized tables have full table functionality. They support features such as constraints, triggers, LOB and object columns, partitioning, parallel operations, online reorganization, and replication. And, they offer these additional features:
-
Prefix compression
-
Overflow storage area and specific column placement
-
Secondary indexes, including bitmap indexes.
Index-organized tables are ideal for OLTP applications, which require fast primary key access and high availability. For example, queries and DML on an orders table used in electronic order processing are predominantly based on primary key access, and heavy volume of concurrent DML can cause row chaining and inefficient space usage in indexes, resulting in a frequent need to reorganize. Because an index-organized table can be reorganized online and without invalidating its secondary indexes, the window of unavailability is greatly reduced or eliminated.
Index-organized tables are suitable for modeling application-specific index structures. For example, content-based information retrieval applications containing text, image and audio data require inverted indexes that can be effectively modeled using index-organized tables. A fundamental component of an internet search engine is an inverted index that can be modeled using index-organized tables.
These are but a few of the applications for index-organized tables.
See Also:
-
Oracle Database Concepts for a more thorough description of index-organized tables
-
Oracle Database VLDB and Partitioning Guide for information about partitioning index-organized tables
Parent topic: Managing Index-Organized Tables
19.13.2 Creating Index-Organized Tables
Index-organized tables provide fast primary key access and high availability.
- About Creating Index-Organized Tables
You use theCREATE TABLE
statement to create index-organized tables. - Example: Creating an Index-Organized Table
An example illustrates creating an index-organized table. - Restrictions for Index-Organized Tables
Several restrictions apply when you are creating an index-organized table. - Creating Index-Organized Tables That Contain Object Types
Index-organized tables can store object types. - Choosing and Monitoring a Threshold Value
Choose a threshold value that can accommodate your key columns, as well as the first few nonkey columns (if they are frequently accessed). - Using the INCLUDING Clause
In addition to specifyingPCTTHRESHOLD
, you can use theINCLUDING
clause to control which nonkey columns are stored with the key columns in an index-organized table. - Parallelizing Index-Organized Table Creation
TheCREATE TABLE...AS SELECT
statement enables you to create an index-organized table and load data from an existing table into it. By including thePARALLEL
clause, the load can be done in parallel. - Using Prefix Compression
Creating an index-organized table using prefix compression (also known as key compression) enables you to eliminate repeated occurrences of key column prefix values.
Parent topic: Managing Index-Organized Tables
19.13.2.1 About Creating Index-Organized Tables
You use the CREATE TABLE
statement to create index-organized tables.
When you create an index-organized table, but you must provide additional information:
-
An
ORGANIZATION INDEX
qualifier, which indicates that this is an index-organized table -
A primary key, specified through a column constraint clause (for a single column primary key) or a table constraint clause (for a multiple-column primary key).
Optionally, you can specify the following:
-
An
OVERFLOW
clause, which preserves dense clustering of the B-tree index by enabling the storage of some of the nonkey columns in a separate overflow data segment. -
A
PCTTHRESHOLD
value, which, when an overflow segment is being used, defines the maximum size of the portion of the row that is stored in the index block, as a percentage of block size. Rows columns that would cause the row size to exceed this maximum are stored in the overflow segment. The row is broken at a column boundary into two pieces, a head piece and tail piece. The head piece fits in the specified threshold and is stored along with the key in the index leaf block. The tail piece is stored in the overflow area as one or more row pieces. Thus, the index entry contains the key value, the nonkey column values that fit the specified threshold, and a pointer to the rest of the row. -
An
INCLUDING
clause, which can be used to specify the nonkey columns that are to be stored in the index block with the primary key.
Parent topic: Creating Index-Organized Tables
19.13.2.2 Example: Creating an Index-Organized Table
An example illustrates creating an index-organized table.
The following statement creates an index-organized table:
CREATE TABLE admin_docindex( token char(20), doc_id NUMBER, token_frequency NUMBER, token_offsets VARCHAR2(2000), CONSTRAINT pk_admin_docindex PRIMARY KEY (token, doc_id)) ORGANIZATION INDEX TABLESPACE admin_tbs PCTTHRESHOLD 20 OVERFLOW TABLESPACE admin_tbs2;
This example creates an index-organized table named admin_docindex
, with a primary key composed of the columns token
and doc_id
. The OVERFLOW
and PCTTHRESHOLD
clauses specify that if the length of a row exceeds 20% of the index block size, then the column that exceeded that threshold and all columns after it are moved to the overflow segment. The overflow segment is stored in the admin_tbs2
tablespace.
See Also:
Oracle Database SQL Language Reference for more information about the syntax to create an index-organized table
Parent topic: Creating Index-Organized Tables
19.13.2.3 Restrictions for Index-Organized Tables
Several restrictions apply when you are creating an index-organized table.
The following are restrictions on creating index-organized tables.
-
The maximum number of columns is 1000.
-
The maximum number of columns in the index portion of a row is 255, including both key and nonkey columns. If more than 255 columns are required, you must use an overflow segment.
-
The maximum number of columns that you can include in the primary key is 32.
-
PCTTHRESHOLD
must be in the range of 1–50. The default is 50. -
All key columns must fit within the specified threshold.
-
If the maximum size of a row exceeds 50% of the index block size and you do not specify an overflow segment, the
CREATE
TABLE
statement fails. -
Index-organized tables cannot have virtual columns.
-
When a table has a foreign key, and the parent of the foreign key is an index-organized table, a session that updates a row that contains the foreign key can stop responding when another session is updating a non-key column in the parent table.
For example, consider a scenario in which a
departments
table is an index-organized table, anddepartment_id
is its primary key. There is anemployees
table with adepartment_id
column that is a foreign key of thedepartments
table. Assume a session is updating thedepartment_name
in a row in thedepartments
table for which thedepartment_id
is20
while another session is updating a row in theemployees
table for which thedepartment_id
is20
. In this case, the session updating theemployees
table can stop responding until the session updating thedepartments
table commits or rolls back. - Index-organized tables that contain one or more LOB columns cannot be moved in parallel.
Parent topic: Creating Index-Organized Tables
19.13.2.4 Creating Index-Organized Tables That Contain Object Types
Index-organized tables can store object types.
The following example creates object type admin_typ
, then creates an index-organized table containing a column of object type admin_typ
:
CREATE OR REPLACE TYPE admin_typ AS OBJECT (col1 NUMBER, col2 VARCHAR2(6)); CREATE TABLE admin_iot (c1 NUMBER primary key, c2 admin_typ) ORGANIZATION INDEX;
You can also create an index-organized table of object types. For example:
CREATE TABLE admin_iot2 OF admin_typ (col1 PRIMARY KEY) ORGANIZATION INDEX;
Another example, that follows, shows that index-organized tables store nested tables efficiently. For a nested table column, the database internally creates a storage table to hold all the nested table rows.
CREATE TYPE project_t AS OBJECT(pno NUMBER, pname VARCHAR2(80)); / CREATE TYPE project_set AS TABLE OF project_t; / CREATE TABLE proj_tab (eno NUMBER, projects PROJECT_SET) NESTED TABLE projects STORE AS emp_project_tab ((PRIMARY KEY(nested_table_id, pno)) ORGANIZATION INDEX) RETURN AS LOCATOR;
The rows belonging to a single nested table instance are identified by a nested_table_id
column. If an ordinary table is used to store nested table columns, the nested table rows typically get de-clustered. But when you use an index-organized table, the nested table rows can be clustered based on the nested_table_id
column.
See Also:
-
Oracle Database SQL Language Reference for details of the syntax used for creating index-organized tables
-
Oracle Database VLDB and Partitioning Guide for information about creating partitioned index-organized tables
-
Oracle Database Object-Relational Developer's Guide for information about object types
Parent topic: Creating Index-Organized Tables
19.13.2.5 Choosing and Monitoring a Threshold Value
Choose a threshold value that can accommodate your key columns, as well as the first few nonkey columns (if they are frequently accessed).
After choosing a threshold value, you can monitor tables to verify that the value you specified is appropriate. You can use the ANALYZE
TABLE
... LIST
CHAINED
ROWS
statement to determine the number and identity of rows exceeding the threshold value.
See Also:
-
"Listing Chained Rows of Tables and Clusters" for more information about chained rows
-
Oracle Database SQL Language Reference for syntax of the
ANALYZE
statement
Parent topic: Creating Index-Organized Tables
19.13.2.6 Using the INCLUDING Clause
In addition to specifying PCTTHRESHOLD
, you can use the INCLUDING
clause to control which nonkey columns are stored with the key columns in an index-organized table.
The database accommodates all nonkey columns up to and including the column specified in the INCLUDING
clause in the index leaf block, provided it does not exceed the specified threshold. All nonkey columns beyond the column specified in the INCLUDING
clause are stored in the overflow segment. If the INCLUDING
and PCTTHRESHOLD
clauses conflict, PCTTHRESHOLD
takes precedence.
Note:
Oracle Database moves all primary key columns of an indexed-organized table to the beginning of the table (in their key order) to provide efficient primary key–based access. As an example:
CREATE TABLE admin_iot4(a INT, b INT, c INT, d INT, primary key(c,b)) ORGANIZATION INDEX;
The stored column order is: c b a d
(instead of: a b c d
). The last primary key column is b
, based on the stored column order. The INCLUDING
column can be the last primary key column (b
in this example), or any nonkey column (that is, any column after b
in the stored column order).
The following CREATE TABLE
statement is similar to the one shown earlier in "Example: Creating an Index-Organized Table" but is modified to create an index-organized table where the token_offsets
column value is always stored in the overflow area:
CREATE TABLE admin_docindex2( token CHAR(20), doc_id NUMBER, token_frequency NUMBER, token_offsets VARCHAR2(2000), CONSTRAINT pk_admin_docindex2 PRIMARY KEY (token, doc_id)) ORGANIZATION INDEX TABLESPACE admin_tbs PCTTHRESHOLD 20 INCLUDING token_frequency OVERFLOW TABLESPACE admin_tbs2;
Here, only nonkey columns before token_offsets
(in this case a single column only) are stored with the key column values in the index leaf block.
Parent topic: Creating Index-Organized Tables
19.13.2.7 Parallelizing Index-Organized Table Creation
The CREATE TABLE...AS SELECT
statement enables you to create an index-organized table and load data from an existing table into it. By including the PARALLEL
clause, the load can be done in parallel.
The following statement creates an index-organized table in parallel by selecting rows from the conventional table hr.jobs
:
CREATE TABLE admin_iot3(i PRIMARY KEY, j, k, l) ORGANIZATION INDEX PARALLEL AS SELECT * FROM hr.jobs;
This statement provides an alternative to parallel bulk-load using SQL*Loader.
Parent topic: Creating Index-Organized Tables
19.13.2.8 Using Prefix Compression
Creating an index-organized table using prefix compression (also known as key compression) enables you to eliminate repeated occurrences of key column prefix values.
Prefix compression breaks an index key into a prefix and a suffix entry. Compression is achieved by sharing the prefix entries among all the suffix entries in an index block. This sharing can lead to huge savings in space, allowing you to store more keys in each index block while improving performance.
You can enable prefix compression using the COMPRESS
clause while:
-
Creating an index-organized table
-
Moving an index-organized table
You can also specify the prefix length (as the number of key columns), which identifies how the key columns are broken into a prefix and suffix entry.
CREATE TABLE admin_iot5(i INT, j INT, k INT, l INT, PRIMARY KEY (i, j, k)) ORGANIZATION INDEX COMPRESS;
The preceding statement is equivalent to the following statement:
CREATE TABLE admin_iot6(i INT, j INT, k INT, l INT, PRIMARY KEY(i, j, k)) ORGANIZATION INDEX COMPRESS 2;
For the list of values (1,2,3), (1,2,4), (1,2,7), (1,3,5), (1,3,4), (1,4,4) the repeated occurrences of (1,2), (1,3) are compressed away.
You can also override the default prefix length used for compression as follows:
CREATE TABLE admin_iot7(i INT, j INT, k INT, l INT, PRIMARY KEY (i, j, k)) ORGANIZATION INDEX COMPRESS 1;
For the list of values (1,2,3), (1,2,4), (1,2,7), (1,3,5), (1,3,4), (1,4,4), the repeated occurrences of 1 are compressed away.
You can disable compression as follows:
ALTER TABLE admin_iot5 MOVE NOCOMPRESS;
One application of prefix compression is in a time-series application that uses a set of time-stamped rows belonging to a single item, such as a stock price. Index-organized tables are attractive for such applications because of the ability to cluster rows based on the primary key. By defining an index-organized table with primary key (stock symbol, time stamp), you can store and manipulate time-series data efficiently. You can achieve more storage savings by compressing repeated occurrences of the item identifier (for example, the stock symbol) in a time series by using an index-organized table with prefix compression.
See Also:
Oracle Database Concepts for more information about prefix compression
Parent topic: Creating Index-Organized Tables
19.13.3 Maintaining Index-Organized Tables
Index-organized tables differ from ordinary tables only in physical organization. Logically, they are manipulated in the same manner as ordinary tables. You can specify an index-organized table just as you would specify a regular table in INSERT
, SELECT
, DELETE
, and UPDATE
statements.
- Altering Index-Organized Tables
All of the alter options available for ordinary tables are available for index-organized tables. This includesADD
,MODIFY
, andDROP
COLUMNS
andCONSTRAINTS
. However, the primary key constraint for an index-organized table cannot be dropped, deferred, or disabled. - Moving (Rebuilding) Index-Organized Tables
Because index-organized tables are primarily stored in a B-tree index, you can encounter fragmentation as a consequence of incremental updates. However, you can use theALTER TABLE...MOVE
statement to rebuild the index and reduce this fragmentation.
Parent topic: Managing Index-Organized Tables
19.13.3.1 Altering Index-Organized Tables
All of the alter options available for ordinary tables are available for index-organized tables. This includes ADD
, MODIFY
, and DROP
COLUMNS
and CONSTRAINTS
. However, the primary key constraint for an index-organized table cannot be dropped, deferred, or disabled.
You can use the ALTER TABLE
statement to modify physical and storage attributes for both primary key index and overflow data segments. All the attributes specified before the OVERFLOW
keyword are applicable to the primary key index segment. All attributes specified after the OVERFLOW
key word are applicable to the overflow data segment. For example, you can set the INITRANS
of the primary key index segment to 4 and the overflow of the data segment INITRANS
to 6 as follows:
ALTER TABLE admin_docindex INITRANS 4 OVERFLOW INITRANS 6;
You can also alter PCTTHRESHOLD
and INCLUDING
column values. A new setting is used to break the row into head and overflow tail pieces during subsequent operations. For example, the PCTHRESHOLD
and INCLUDING
column values can be altered for the admin_docindex
table as follows:
ALTER TABLE admin_docindex PCTTHRESHOLD 15 INCLUDING doc_id;
By setting the INCLUDING
column to doc_id
, all the columns that follow token_frequency
and token_offsets
, are stored in the overflow data segment.
For index-organized tables created without an overflow data segment, you can add an overflow data segment by using the ADD OVERFLOW
clause. For example, you can add an overflow segment to table admin_iot3
as follows:
ALTER TABLE admin_iot3 ADD OVERFLOW TABLESPACE admin_tbs2;
Parent topic: Maintaining Index-Organized Tables
19.13.3.2 Moving (Rebuilding) Index-Organized Tables
Because index-organized tables are primarily stored in a B-tree index, you can encounter fragmentation as a consequence of incremental updates. However, you can use the ALTER TABLE...MOVE
statement to rebuild the index and reduce this fragmentation.
The following statement rebuilds the index-organized table admin_docindex
:
ALTER TABLE admin_docindex MOVE;
You can rebuild index-organized tables online using the ONLINE
keyword. The overflow data segment, if present, is rebuilt when the OVERFLOW
keyword is specified. For example, to rebuild the admin_docindex
table but not the overflow data segment, perform a move online as follows:
ALTER TABLE admin_docindex MOVE ONLINE;
To rebuild the admin_docindex
table along with its overflow data segment perform the move operation as shown in the following statement. This statement also illustrates moving both the table and overflow data segment to new tablespaces.
ALTER TABLE admin_docindex MOVE TABLESPACE admin_tbs2 OVERFLOW TABLESPACE admin_tbs3;
In this last statement, an index-organized table with a LOB column (CLOB) is created. Later, the table is moved with the LOB
index and data segment being rebuilt and moved to a new tablespace.
CREATE TABLE admin_iot_lob (c1 number (6) primary key, admin_lob CLOB) ORGANIZATION INDEX LOB (admin_lob) STORE AS (TABLESPACE admin_tbs2); . . . ALTER TABLE admin_iot_lob MOVE LOB (admin_lob) STORE AS (TABLESPACE admin_tbs3);
See Also:
Oracle Database SecureFiles and Large Objects Developer's Guide for information about LOBs in index-organized tables
Parent topic: Maintaining Index-Organized Tables
19.13.4 Creating Secondary Indexes on Index-Organized Tables
A secondary index is an index on an index-organized table. The secondary index is an independent schema object and is stored separately from the index-organized table.
- About Secondary Indexes on Index-Organized Tables
You can create secondary indexes on an index-organized tables to provide multiple access paths. - Creating a Secondary Index on an Index-Organized Table
You can create a secondary index on an index-organized table. - Maintaining Physical Guesses in Logical Rowids
A logical rowid can include a guess, which identifies the block location of a row at the time the guess is made. Instead of doing a full key search, the database uses the guess to search the block directly. - Specifying Bitmap Indexes on Index-Organized Tables
Bitmap indexes on index-organized tables are supported, provided the index-organized table is created with a mapping table.
Parent topic: Managing Index-Organized Tables
19.13.4.1 About Secondary Indexes on Index-Organized Tables
You can create secondary indexes on an index-organized tables to provide multiple access paths.
Secondary indexes on index-organized tables differ from indexes on ordinary tables in two ways:
-
They store logical rowids instead of physical rowids. This is necessary because the inherent movability of rows in a B-tree index results in the rows having no permanent physical addresses. If the physical location of a row changes, its logical rowid remains valid. One effect of this is that a table maintenance operation, such as
ALTER TABLE
...MOVE
, does not make the secondary index unusable. -
The logical rowid also includes a physical guess which identifies the database block address at which the row is likely to be found. If the physical guess is correct, a secondary index scan would incur a single additional I/O once the secondary key is found. The performance would be similar to that of a secondary index-scan on an ordinary table.
Unique and non-unique secondary indexes, function-based secondary indexes, and bitmap indexes are supported as secondary indexes on index-organized tables.
Parent topic: Creating Secondary Indexes on Index-Organized Tables
19.13.4.2 Creating a Secondary Index on an Index-Organized Table
You can create a secondary index on an index-organized table.
The following statement shows the creation of a secondary index on the docindex
index-organized table where doc_id
and token
are the key columns:
CREATE INDEX Doc_id_index on Docindex(Doc_id, Token);
This secondary index allows the database to efficiently process a query, such as the following, the involves a predicate on doc_id
:
SELECT Token FROM Docindex WHERE Doc_id = 1;
Parent topic: Creating Secondary Indexes on Index-Organized Tables
19.13.4.3 Maintaining Physical Guesses in Logical Rowids
A logical rowid can include a guess, which identifies the block location of a row at the time the guess is made. Instead of doing a full key search, the database uses the guess to search the block directly.
However, as new rows are inserted, guesses can become stale. The indexes are still usable through the primary key-component of the logical rowid, but access to rows is slower.
-
Collect index statistics with the
DBMS_STATS
package to monitor the staleness of guesses.The database checks whether the existing guesses are still valid and records the percentage of rows with valid guesses in the data dictionary.
-
Query the
PCT_DIRECT_ACCESS
column of theDBA_INDEXES
view (and related views) to show the statistics related to existing guesses. -
To obtain fresh guesses, you can rebuild the secondary index.
Rebuilding a secondary index on an index-organized table involves reading the base table, unlike rebuilding an index on an ordinary table.
A quicker, more light weight means of fixing the guesses is to use the ALTER
INDEX
... UPDATE
BLOCK
REFERENCES
statement. This statement is performed online, while DML is still allowed on the underlying index-organized table.
After you rebuild a secondary index, or otherwise update the block references in the guesses, collect index statistics again.
Parent topic: Creating Secondary Indexes on Index-Organized Tables
19.13.4.4 Specifying Bitmap Indexes on Index-Organized Tables
Bitmap indexes on index-organized tables are supported, provided the index-organized table is created with a mapping table.
This is done by specifying the MAPPING
TABLE
clause in the CREATE
TABLE
statement that you use to create the index-organized table, or in an ALTER
TABLE
statement to add the mapping table later.
See Also:
Oracle Database Concepts for a description of mapping tables
Parent topic: Creating Secondary Indexes on Index-Organized Tables
19.13.5 Analyzing Index-Organized Tables
Just like ordinary tables, index-organized tables are analyzed using the DBMS_STATS
package, or the ANALYZE
statement.
- Collecting Optimizer Statistics for Index-Organized Tables
To collect optimizer statistics, use theDBMS_STATS
package. - Validating the Structure of Index-Organized Tables
Use theANALYZE
statement to validate the structure of your index-organized table or to list any chained rows.
Parent topic: Managing Index-Organized Tables
19.13.5.1 Collecting Optimizer Statistics for Index-Organized Tables
To collect optimizer statistics, use the DBMS_STATS
package.
For example, the following statement gathers statistics for the index-organized countries
table in the hr
schema:
EXECUTE DBMS_STATS.GATHER_TABLE_STATS ('HR','COUNTRIES');
The DBMS_STATS
package analyzes both the primary key index segment and the overflow data segment, and computes logical as well as physical statistics for the table.
-
The logical statistics can be queried using
USER_TABLES
,ALL_TABLES
orDBA_TABLES
. -
You can query the physical statistics of the primary key index segment using
USER_INDEXES
,ALL_INDEXES
orDBA_INDEXES
(and using the primary key index name). For example, you can obtain the primary key index segment physical statistics for the tableadmin_docindex
as follows:SELECT LAST_ANALYZED, BLEVEL,LEAF_BLOCKS, DISTINCT_KEYS FROM DBA_INDEXES WHERE INDEX_NAME= 'PK_ADMIN_DOCINDEX';
-
You can query the physical statistics for the overflow data segment using the
USER_TABLES
,ALL_TABLES
orDBA_TABLES
. You can identify the overflow entry by searching forIOT_TYPE = 'IOT_OVERFLOW'
. For example, you can obtain overflow data segment physical attributes associated with theadmin_docindex
table as follows:SELECT LAST_ANALYZED, NUM_ROWS, BLOCKS, EMPTY_BLOCKS FROM DBA_TABLES WHERE IOT_TYPE='IOT_OVERFLOW' and IOT_NAME= 'ADMIN_DOCINDEX';
See Also:
-
Oracle Database SQL Tuning Guide for more information about collecting optimizer statistics
-
Oracle Database PL/SQL Packages and Types Reference for more information about of the
DBMS_STATS
package
-
Parent topic: Analyzing Index-Organized Tables
19.13.5.2 Validating the Structure of Index-Organized Tables
Use the ANALYZE
statement to validate the structure of your index-organized table or to list any chained rows.
These operations are discussed in the following sections located elsewhere in this book:
-
"Validating Tables, Indexes, Clusters, and Materialized Views"
-
"Listing Chained Rows of Tables and Clusters"
Note:
There are special considerations when listing chained rows for index-organized tables. These are discussed in the Oracle Database SQL Language Reference.
Parent topic: Analyzing Index-Organized Tables
19.13.6 Using the ORDER BY Clause with Index-Organized Tables
If an ORDER BY
clause only references the primary key column or a prefix of it, then the optimizer avoids the sorting overhead, as the rows are returned sorted on the primary key columns.
The following queries avoid sorting overhead because the data is already sorted on the primary key:
SELECT * FROM admin_docindex2 ORDER BY token, doc_id; SELECT * FROM admin_docindex2 ORDER BY token;
If, however, you have an ORDER BY
clause on a suffix of the primary key column or non-primary-key columns, additional sorting is required (assuming no other secondary indexes are defined).
SELECT * FROM admin_docindex2 ORDER BY doc_id; SELECT * FROM admin_docindex2 ORDER BY token_frequency;
Parent topic: Managing Index-Organized Tables
19.13.7 Converting Index-Organized Tables to Regular Tables
You can convert index-organized tables to regular (heap organized) tables using the Oracle import or export utilities, or the CREATE TABLE...AS SELECT
statement.
To convert an index-organized table to a regular table:
-
Export the index-organized table data using conventional path.
-
Create a regular table definition with the same definition.
-
Import the index-organized table data, making sure
IGNORE=y
(ensures that object exists error is ignored).Note:
Before converting an index-organized table to a regular table, be aware that index-organized tables cannot be exported using pre-Oracle8 versions of the Export utility.
See Also:
Oracle Database Utilities for more details about using the original
IMP
utility and the Data Pump import and export utilities
Parent topic: Managing Index-Organized Tables
19.14 Managing Partitioned Tables
Partitioned tables enable your data to be broken down into smaller, more manageable pieces called partitions, or even subpartitions. Each partition can have separate physical attributes, such as compression enabled or disabled, type of compression, physical storage settings, and tablespace, thus providing a structure that can be better tuned for availability and performance. In addition, each partition can be managed individually, which can simplify and reduce the time required for backup and administration.
See Oracle Database VLDB and Partitioning Guide for more information about managing partitioned tables.
Parent topic: Managing Tables
19.15 Managing External Tables
External tables are the tables that do not reside in the database. They reside outside the database, in Object storage or external files, such as operating system files or Hadoop Distributed File System (HDFS) files.
- About External Tables
Oracle Database allows you read-only access to data in external tables. External tables are defined as tables that do not reside in the database, and they can be in any format for which an access driver is provided. - Creating External Tables
You create external tables using theCREATE TABLE
statement with anORGANIZATION EXTERNAL
clause. This statement creates only metadata in the data dictionary. - Altering External Tables
You can modify an external table with theALTER TABLE
statement. - Preprocessing External Tables
External tables can be preprocessed by user-supplied preprocessor programs. By using a preprocessing program, users can use data from a file that is not in a format supported by the driver. - Overriding Parameters for External Tables in a Query
TheEXTERNAL MODIFY
clause of aSELECT
statement modifies external table parameters. - Using Inline External Tables
Inline external tables enable the runtime definition of an external table as part of a SQL statement, without creating the external table as persistent object in the data dictionary. - Partitioning External Tables
For large amounts of data, partitioning for external tables provides fast query performance and enhanced data maintenance. - Dropping External Tables
For an external table, theDROP
TABLE
statement removes only the table metadata in the database. It has no affect on the actual data, which resides outside of the database. - System and Object Privileges for External Tables
System and object privileges for external tables are a subset of those for regular table. - Using SQL*Loader for External Tables with Partition Values in File Paths
To enhance management of large numbers of data files in object stores, you can use external table partitioning with folder names as part of the file paths.
Parent topic: Managing Tables
19.15.1 About External Tables
Oracle Database allows you read-only access to data in external tables. External tables are defined as tables that do not reside in the database, and they can be in any format for which an access driver is provided.
By providing the database with metadata describing an external table, the database is able to expose the data in the external table as if it were data residing in a regular database table. The external data can be queried directly and in parallel using SQL.
You can, for example, select, join, or sort external table data. You can also create views and synonyms for external tables. However, no DML operations (UPDATE
, INSERT
, or DELETE
) are possible, and no indexes can be created, on external tables.
External tables provide a framework to unload the result of an arbitrary SELECT
statement into a platform-independent Oracle-proprietary format that can be used by Oracle Data Pump. External tables provide a valuable means for performing basic extraction, transformation, and loading (ETL) tasks that are common for data warehousing.
You define the metadata for external tables with the CREATE TABLE...ORGANIZATION EXTERNAL
statement. This external table definition can be thought of as a view that allows running any SQL query against external data without requiring that the external data first be loaded into the database. An access driver is the mechanism used to read the external data in the table. When you use external tables to unload data, the metadata is automatically created based on the data types in the SELECT
statement.
Oracle Database provides access drivers for external tables. The default access driver is ORACLE_LOADER
, which allows the reading of data from external files using the Oracle loader technology. The ORACLE_LOADER
access driver provides data mapping capabilities which are a subset of the control file syntax of SQL*Loader utility. Another access driver, ORACLE_DATAPUMP
, lets you unload data—that is, read data from the database and insert it into an external table, represented by one or more external files—and then reload it into an Oracle Database.
Starting with Oracle Database 12c Release 2 (12.2), new access drivers ORACLE_HIVE
and ORACLE_HDFS
are available. The ORACLE_HIVE
access driver can extract data stored in Apache Hive. The ORACLE_HDFS
access driver can extract data stored in a Hadoop Distributed File System (HDFS).
Starting with Oracle Database 18c, inline external tables are supported. Inline external tables enable the runtime definition of an external table as part of a SQL statement, without creating the external table as persistent object in the data dictionary.
Starting with Oracle Database Release 19.10, Object storage is supported as
a source for external table data. This enables Oracle databases to use data stored in
Cloud applications. Additional data formats such as ORC, Parquet, and Avro are supported
with the ORACLE_BIGDATA
access driver.
Note:
The ANALYZE
statement is not supported for gathering statistics for external tables. Use the DBMS_STATS
package instead.
See Also:
-
Oracle Database SQL Language Reference for restrictions that apply to external tables
-
Oracle Database Utilities for information about access drivers
-
Oracle Database Data Warehousing Guide for information about using external tables for ETL in a data warehousing environment
-
Oracle Database SQL Tuning Guide for information about using the
DBMS_STATS
package -
Oracle Database Utilities for information about the
ORACLE_HIVE
andORACLE_HDFS
drivers and for more information about external tables
Parent topic: Managing External Tables
19.15.2 Creating External Tables
You create external tables using the CREATE TABLE
statement
with an ORGANIZATION EXTERNAL
clause. This statement creates only metadata in
the data dictionary.
Note:
-
Starting with Oracle Database 12c Release 2 (12.2), you can partition external tables for fast query performance and enhanced data maintenance for large amounts of data.
-
External tables can have virtual columns. However, a virtual column in an external table cannot be defined using the
evaluation_edition_clause
or theunusable_edition_clause
.
Example 19-21 Creating an External Table and Loading Data
This example creates an external table and then uploads the data to a database
table. Alternatively, you can unload data through the external table framework by specifying
the AS
subquery
clause of the CREATE TABLE
statement.
External table data pump unload can use only the ORACLE_DATAPUMP
access
driver.
The data for the external table resides in the two text files
empxt1.dat
and empxt2.dat
.
The file empxt1.dat
contains the following sample data:
360,Jane,Janus,ST_CLERK,121,17-MAY-2001,3000,0,50,jjanus 361,Mark,Jasper,SA_REP,145,17-MAY-2001,8000,.1,80,mjasper 362,Brenda,Starr,AD_ASST,200,17-MAY-2001,5500,0,10,bstarr 363,Alex,Alda,AC_MGR,145,17-MAY-2001,9000,.15,80,aalda
The file empxt2.dat
contains the following sample data:
401,Jesse,Cromwell,HR_REP,203,17-MAY-2001,7000,0,40,jcromwel 402,Abby,Applegate,IT_PROG,103,17-MAY-2001,9000,.2,60,aapplega 403,Carol,Cousins,AD_VP,100,17-MAY-2001,27000,.3,90,ccousins 404,John,Richardson,AC_ACCOUNT,205,17-MAY-2001,5000,0,110,jrichard
The following SQL statements create an external table named
admin_ext_employees
in the hr
schema and load data from
the external table into the hr.employees
table.
CONNECT / AS SYSDBA; -- Set up directories and grant access to hr CREATE OR REPLACE DIRECTORY admin_dat_dir AS '/flatfiles/data'; CREATE OR REPLACE DIRECTORY admin_log_dir AS '/flatfiles/log'; CREATE OR REPLACE DIRECTORY admin_bad_dir AS '/flatfiles/bad'; GRANT READ ON DIRECTORY admin_dat_dir TO hr; GRANT WRITE ON DIRECTORY admin_log_dir TO hr; GRANT WRITE ON DIRECTORY admin_bad_dir TO hr; -- hr connects. Provide the user password (hr) when prompted. CONNECT hr -- create the external table CREATE TABLE admin_ext_employees (employee_id NUMBER(4), first_name VARCHAR2(20), last_name VARCHAR2(25), job_id VARCHAR2(10), manager_id NUMBER(4), hire_date DATE, salary NUMBER(8,2), commission_pct NUMBER(2,2), department_id NUMBER(4), email VARCHAR2(25) ) ORGANIZATION EXTERNAL ( TYPE ORACLE_LOADER DEFAULT DIRECTORY admin_dat_dir ACCESS PARAMETERS ( records delimited by newline badfile admin_bad_dir:'empxt%a_%p.bad' logfile admin_log_dir:'empxt%a_%p.log' fields terminated by ',' missing field values are null ( employee_id, first_name, last_name, job_id, manager_id, hire_date char date_format date mask "dd-mon-yyyy", salary, commission_pct, department_id, email ) ) LOCATION ('empxt1.dat', 'empxt2.dat') ) PARALLEL REJECT LIMIT UNLIMITED; -- enable parallel for loading (good if lots of data to load) ALTER SESSION ENABLE PARALLEL DML; -- load the data in hr employees table INSERT INTO employees (employee_id, first_name, last_name, job_id, manager_id, hire_date, salary, commission_pct, department_id, email) SELECT * FROM admin_ext_employees;
The following paragraphs contain descriptive information about this example.
The first few statements in this example create the directory objects for the
operating system directories that contain the data sources, and for the bad record and log
files specified in the access parameters. You must also grant READ
or
WRITE
directory object privileges, as appropriate.
Note:
When creating a directory object or BFILEs, ensure that the following conditions are met:
-
The operating system file must not be a symbolic or hard link.
-
The operating system directory path named in the Oracle Database directory object must be an existing OS directory path.
-
The operating system directory path named in the directory object should not contain any symbolic links in its components.
The TYPE
specification indicates the access driver of the
external table. The access driver is the API that interprets the external data for the
database. If you omit the TYPE
specification,
ORACLE_LOADER
is the default access driver. You must specify the
ORACLE_DATAPUMP
access driver if you specify the AS
subquery
clause to unload data from one Oracle Database and reload
it into the same or a different Oracle Database.
The access parameters, specified in the ACCESS PARAMETERS
clause, are opaque to the database. These access parameters are defined by the access
driver, and are provided to the access driver by the database when the external table is
accessed. See
Oracle Database Utilities for a description of the
ORACLE_LOADER
access parameters.
The PARALLEL
clause enables parallel query on the data
sources. The granule of parallelism is by default a data source, but parallel access within
a data source is implemented whenever possible. For example, if PARALLEL=3
were specified, then multiple parallel execution servers could be working on a data source.
But, parallel access within a data source is provided by the access driver only if all of
the following conditions are met:
-
The media allows random positioning within a data source.
-
It is possible to find a record boundary from a random position.
-
The data files are large enough to make it worthwhile to break up into multiple chunks.
Note:
Specifying a
PARALLEL
clause is of value only when dealing with large amounts of data. Otherwise, it is not advisable to specify aPARALLEL
clause, and doing so can be detrimental.
The REJECT
LIMIT
clause specifies that there is no limit on the number of errors that
can occur during a query of the external data. For parallel access, the
REJECT
LIMIT
applies to each parallel execution server independently. For example,
if a REJECT
LIMIT
of 10 is specified, then each parallel query process can allow up to
10 rejections. Therefore, with a parallel degree of two and a REJECT
LIMIT
of 10, the statement might fail with between 10 and 20 rejections. If
one parallel server processes all 10 rejections, then the limit is reached, and the
statement is terminated. However, one parallel execution server could process nine
rejections and another parallel execution server could process nine rejections and the
statement will succeed with 18 rejections. Hence, the only precisely enforced values for
REJECT
LIMIT
on parallel query are 0
and
UNLIMITED
.
In this example, the INSERT
INTO
TABLE
statement generates a dataflow from the external data source to the
Oracle Database SQL engine where data is processed. As data is parsed by the access driver
from the external table sources and provided to the external table interface, the external
data is converted from its external representation to its Oracle Database internal data
type.
Example 19-22 Creating an External Table for Data Stored in Oracle Cloud
This example creates an external table that enables you to access data stored in Oracle Cloud Infrastructure Object Storage (Object Storage).
Before you create the external table, you must create a credential object to store your object storage credentials. The credential object stores, in an encrypted format, the user name and password (or API signing key) required to access Object Storage credentials. The credential password must match the Auth Token created for the user name in your Cloud service. Ensure that the identity specified by the credential has access to the underlying data in Object Store. Note that this step is required only once, unless your object store credentials change.
The following example creates a credential object named
MY_OCI_CRED
.
BEGIN
DBMS_CLOUD.CREATE_CREDENTIAL(
credential_name => 'MY_OCI_CRED',
username => 'oss_user@example.com',
password => 'password');
END;
/
Create an external table on top of your source files using the
DBMS_CLOUD.CREATE_EXTERNAL_TABLE
procedure. This procedure supports
external files in the supported cloud object storage services. The credential is a table
level property; therefore, the external files must be on the same object store.
The following statement creates an external table to access data stored in
Object Storage. The external table is based on the source file
channels.txt
.
BEGIN
DBMS_CLOUD.CREATE_EXTERNAL_TABLE(
table_name =>'CHANNELS_EXT',
credential_name =>'MY_OCI_CRED',
file_uri_list =>'https://objectstorage.us-phoenix-1.oraclecloud.com/n/namespace-string/b/bucketname/o/channels.txt',
format => json_object('delimiter' value ','),
column_list => 'CHANNEL_ID NUMBER, CHANNEL_DESC VARCHAR2(20), CHANNEL_CLASS VARCHAR2(20)' );
END;
/
where:
-
credential_name
is the name of the credential object created,MY_OCI_CRED
. -
file_uri_list
is a comma delimited list of the source files you want to query. -
format
defines the options you can specify to describe the format of the source file. -
column_list
is a comma delimited list of the column definitions in the source files.
See Also:
-
Oracle Database SQL Language Reference provides details of the syntax of the
CREATE TABLE
statement for creating external tables and specifies restrictions on the use of clauses -
Oracle Database PL/SQL Packages and Types Reference for information about the DBMS_CLOUD package and its procedures
Parent topic: Managing External Tables
19.15.3 Altering External Tables
You can modify an external table with the ALTER TABLE
statement.
You can use any of the ALTER TABLE
clauses shown in Table 19-6 to change the characteristics of an external table. No other clauses are permitted.
Table 19-6 ALTER TABLE Clauses for External Tables
ALTER TABLE Clause | Description | Example |
---|---|---|
|
Changes the reject limit. The default value is |
|
|
Determines how the access driver validates rows in subsequent queries:
|
|
|
Changes the default directory specification. |
|
|
Allows access parameters to be changed without dropping and re-creating the external table metadata. |
|
|
Allows data sources to be changed without dropping and re-creating the external table metadata. |
|
|
No difference from regular tables. Allows degree of parallelism to be changed. |
No new syntax |
|
No difference from regular tables. Allows a column to be added to an external table. Virtual columns are not permitted. |
No new syntax |
|
No difference from regular tables. Allows an external table column to be modified. Virtual columns are not permitted. |
No new syntax |
|
Transparently converted into an |
No new syntax |
|
No difference from regular tables. Allows an external table column to be dropped. |
No new syntax |
|
No difference from regular tables. Allows external table to be renamed. |
No new syntax |
Parent topic: Managing External Tables
19.15.4 Preprocessing External Tables
External tables can be preprocessed by user-supplied preprocessor programs. By using a preprocessing program, users can use data from a file that is not in a format supported by the driver.
Caution:
There are security implications to consider when using the PREPROCESSOR
clause. See Oracle Database Security Guide for more information.
For example, a user may want to access data stored in a compressed format. Specifying a decompression program for the ORACLE_LOADER
access driver allows the data to be decompressed as the access driver processes the data.
To use the preprocessing feature, you must specify the PREPROCESSOR
clause in the access parameters of the ORACLE_LOADER
access driver. The preprocessor must be a directory object, and the user accessing the external table must have EXECUTE
privileges for the directory object. The following example includes the PREPROCESSOR
clause and specifies the directory and preprocessor program.
CREATE TABLE sales_transactions_ext
(PROD_ID NUMBER,
CUST_ID NUMBER,
TIME_ID DATE,
CHANNEL_ID CHAR,
PROMO_ID NUMBER,
QUANTITY_SOLD NUMBER,
AMOUNT_SOLD NUMBER(10,2),
UNIT_COST NUMBER(10,2),
UNIT_PRICE NUMBER(10,2))
ORGANIZATION external
(TYPE oracle_loader
DEFAULT DIRECTORY data_file_dir
ACCESS PARAMETERS
(RECORDS DELIMITED BY NEWLINE
CHARACTERSET AL32UTF8
PREPROCESSOR exec_file_dir:'zcat'
BADFILE log_file_dir:'sh_sales.bad_xt'
LOGFILE log_file_dir:'sh_sales.log_xt'
FIELDS TERMINATED BY "|" LDRTRIM
( PROD_ID,
CUST_ID,
TIME_ID,
CHANNEL_ID,
PROMO_ID,
QUANTITY_SOLD,
AMOUNT_SOLD,
UNIT_COST,
UNIT_PRICE))
location ('sh_sales.dat.gz')
)REJECT LIMIT UNLIMITED;
The PREPROCESSOR
clause is not available for databases that use Oracle Database Vault.
Note:
On the Windows platform, a preprocessor program must have a.bat
or .cmd
extension.
See Also:
-
Oracle Database Utilities provides information more information about the
PREPROCESSOR
clause -
Oracle Database Security Guide for more information about the security implications of the
PREPROCESSOR
clause
Parent topic: Managing External Tables
19.15.5 Overriding Parameters for External Tables in a Query
The EXTERNAL MODIFY
clause of a SELECT
statement modifies external table parameters.
You can override the following clauses for an external table in an EXTERNAL MODIFY
clause:
-
DEFAULT DIRECTORY
-
LOCATION
-
ACCESS PARAMETERS
-
REJECT LIMIT
You can modify more than one clause in a single query. A bind variable can be specified for LOCATION
and REJECT LIMIT
, but not for DEFAULT DIRECTORY
or ACCESS PARAMETERS
.
The modifications only apply to the query. They do not affect the table permanently.
For partitioned external tables, only table-level clauses can be overridden.
- Connect to the database as a user with the privileges required to query the external table.
- Issue a
SELECT
statement on the external table with theEXTERNAL MODIFY
clause.
Example 19-23 Overriding Parameters for External Tables in a Query
Assume an external table named sales_external
has a REJECT LIMIT
set to 25
. The following query modifies this setting to REJECT LIMIT UNLIMITED
:
SELECT * FROM sales_external EXTERNAL MODIFY (LOCATION ('sales_9.csv')
REJECT LIMIT UNLIMITED);
Parent topic: Managing External Tables
19.15.6 Using Inline External Tables
Inline external tables enable the runtime definition of an external table as part of a SQL statement, without creating the external table as persistent object in the data dictionary.
With inline external tables, the same syntax that is used to create an external table with a CREATE TABLE
statement can be used in a SELECT
statement at runtime. Specify inline external tables in the FROM
clause of a query block. Queries that include inline external tables can also include regular tables for joins, aggregation, and so on.
The following SQL statement performs a runtime query on external data:
SELECT * FROM EXTERNAL (
(time_id DATE NOT NULL,
prod_id INTEGER NOT NULL,
quantity_sold NUMBER(10,2),
amount_sold NUMBER(10,2))
TYPE ORACLE_LOADER
DEFAULT DIRECTORY data_dir1
ACCESS PARAMETERS (
RECORDS DELIMITED BY NEWLINE
FIELDS TERMINATED BY '|')
LOCATION ('sales_9.csv') REJECT LIMIT UNLIMITED) sales_external;
Although no table named sales_external
was created previously, this query reads the external data and returns the results.
Note:
Inline external tables do not support partitioning. The query can control which directories and files to scan, so that pruning can be accomplished by omitting files that are not needed for the query.
Parent topic: Managing External Tables
19.15.7 Partitioning External Tables
For large amounts of data, partitioning for external tables provides fast query performance and enhanced data maintenance.
- About Partitioning External Tables
Partitioning data in external tables is similar to partitioning tables stored in the database, but there are some differences. The files for the partitioned external table can be stored on a file system, in Apache Hive storage, or in a Hadoop Distributed File System (HDFS). - Restrictions for Partitioned External Tables
Some restrictions apply to partitioned external tables. - Creating a Partitioned External Table
You create a non-composite partitioned external table by issuing aCREATE TABLE
statement with theORGANIZATION EXTERNAL
clause and thePARTITION BY
clause. To create a composite partitioned external table, theSUBPARTITION BY
clause must also be included. - Altering a Partitioned External Table
You can use theALTER TABLE
statement to modify table-level external parameters, but not the partition-level and subpartition-level parameters, of a partitioned external table.
Parent topic: Managing External Tables
19.15.7.1 About Partitioning External Tables
Partitioning data in external tables is similar to partitioning tables stored in the database, but there are some differences. The files for the partitioned external table can be stored on a file system, in Apache Hive storage, or in a Hadoop Distributed File System (HDFS).
Before attempting to partition external tables, you should understand the concepts related to partitioning in Oracle Database VLDB and Partitioning Guide.
The main reason to partition external tables is to take advantage of the same performance improvements provided by partitioning tables stored in the database. Specifically, partition pruning and partition-wise joins can improve query performance. Partition pruning means that queries can focus on a subset of the data in an external table instead of all of the data because the query can apply to only one partition. Partition-wise joins can be applied when two tables are being joined and both tables are partitioned on the join key, or when a reference partitioned table is joined with its parent table. Partition-wise joins break a large join into smaller joins that occur between each of the partitions, completing the overall join in less time.
Most of the partitioning strategies that are supported for tables in the database are supported for external tables. External tables can be partitioned by range or list, and composite partitioning is supported. However, hash partitioning is not supported for external tables.
For a partitioned table that is stored in the database, storage for each partition is specified with a tablespace. For a partitioned external table, storage for each partition is specified by indicating the directory and files for each partition.
Clauses for Creating Partitioned External Tables
The clauses for creating a non-partitioned external table are the following:
-
TYPE
- Specifies the access driver for the type of external table (ORACLE_LOADER
,ORACLE_DATAPUMP
,ORACLE_HIVE
, andORACLE_HDFS
). -
DEFAULT DIRECTORY
- Specifies with a directory object the default directory to use for all input and output files that do not explicitly name a directory object. -
ACCESS PARAMETERS
- Describe the external data source. -
LOCATION
- Specifies the files for the external table. -
REJECT LIMIT
- Specifies the number of errors that can occur during a query of the external data.
When you create a partitioned external table, you must include a PARTITION
clause that defines each partition. The following table describes the clauses allowed at each level during external table creation.
Table 19-7 External Table Clauses and Partitioning
Clause | Table Level | Partition Level | Subpartition Level |
---|---|---|---|
|
Allowed |
Not Allowed |
Not Allowed |
|
Allowed |
Allowed |
Allowed |
|
Allowed |
Not Allowed |
Not Allowed |
|
Not allowed |
Allowed |
Allowed |
|
Allowed |
Not allowed |
Not allowed |
For a non-composite partitioned table, files for a partition must be specified in the LOCATION
clause for the partition. For a composite partitioned table, files for a subpartition must be specified in the LOCATION
clause for the subpartition. When a partition has subpartitions, the LOCATION
clause can be specified for subpartitions but not for the partition. If the LOCATION
clause is omitted for a partition or subpartition, then an empty partition or subpartition is created.
In the LOCATION
clause, the files are named in the form directory:file
, and one clause can specify multiple files. The directory
portion is optional. The following rules apply for the directory used by a partition or subpartition:
-
When a directory is specified in the
LOCATION
clause for a partition or subpartition, then it applies to that location only. -
In the
LOCATION
clause for a specific partition, for each file that does not have a directory specification, use the directory specified in theDEFAULT DIRECTORY
clause for the partition or table level, in order.For example, when the
ORGANIZATION EXTERNAL
clause of aCREATE TABLE
statement includes aDEFAULT DIRECTORY
clause, and aPARTITION
clause in the statement does not specify a directory for a file in itsLOCATION
clause, the file uses the directory specified in theDEFAULT DIRECTORY
clause for the table. -
In the
LOCATION
clause for a specific subpartition, for each file that does not have a directory specification, use the directory specified in theDEFAULT DIRECTORY
clause for the subpartition, partition, or table level, in order.For example, when a
PARTITION
clause includes aDEFAULT DIRECTORY
clause, and aSUBPARITION
clause in the partition does not specify a directory for a file in itsLOCATION
clause, the file uses the directory specified in theDEFAULT DIRECTORY
clause for the partition. -
The default directory for a partition or subpartition cannot be specified in a
LOCATION
clause. It can only be specified in aDEFAULT DIRECTORY
clause.
See Also:
Example 19-25 illustrates the directory rulesUsing the ORACLE_HIVE Access Driver
Apache Hive has its own partitioning. To create partitioned external tables, use the CREATE_EXTDDL_FOR_HIVE
procedure in the DBMS_HADOOP
package. This procedure generates data definition language (DDL) statements that you can use to create a partitioned external table that corresponds with the partitioning in the Apache Hive storage.
The DBMS_HADOOP
package also includes the SYNC_PARTITIONS_FOR_HIVE
procedure. This procedure automatically synchronizes the partitioning of the partitioned external table in the Apache Hive storage with the partitioning metadata of the same table stored in the Oracle Database.
Related Topics
Parent topic: Partitioning External Tables
19.15.7.2 Restrictions for Partitioned External Tables
Some restrictions apply to partitioned external tables.
The following are restrictions for partitioned external tables:
-
All restrictions that apply to non-partitioned external tables also apply to partitioned external tables.
-
Partitioning restrictions that apply to tables stored in the database also apply to partitioned external tables, such as the maximum number of partitions.
-
Oracle Database cannot guarantee that the external files for partitions contain data that satisfies partitioning definitions.
-
Only the
DEFAULT DIRECTORY
andLOCATION
clauses can be specified in aPARTITION
orSUBPARTITION
clause. -
When altering a partitioned external table with the
ALTER TABLE
statement, the following clauses are not supported:MODIFY PARTITION
,EXCHANGE PARTITION
,MOVE PARTITION
,MERGE PARTITIONS
,SPLIT PARTITION
,COALESCE PARTITION
, andTRUNCATE PARTITION
. -
Reference partitioning, automatic list partitioning, and interval partitioning are not supported.
-
Subpartition templates are not supported.
-
The
ORACLE_DATAPUMP
access driver cannot populate external files for partitions using aCREATE TABLE AS SELECT
statement. -
Incremental statistics are not gathered for partitioned external tables.
-
In addition to restrictions on partitioning methods that can be used for the other drivers, range and composite partitioning are not supported for the
ORACLE_HIVE
access driver. -
A
SELECT
statement with theEXTERNAL MODIFY
clause cannot override partition-level or subpartition-level clauses. Only external clauses supported at the table level can be overridden with theEXTERNAL MODIFY
clause. Because theLOCATION
clause is not allowed at the table level for a partitioned external table, it cannot be overridden with theEXTERNAL MODIFY
clause.
See Also:
-
Oracle Database SQL Language Reference provides details of the syntax of the
CREATE TABLE
statement for creating external tables and specifies restrictions on the use of clauses
Parent topic: Partitioning External Tables
19.15.7.3 Creating a Partitioned External Table
You create a non-composite partitioned external table by issuing a CREATE TABLE
statement with the ORGANIZATION EXTERNAL
clause and the PARTITION BY
clause. To create a composite partitioned external table, the SUBPARTITION BY
clause must also be included.
The PARTITION BY
clause and the SUBPARTITION BY
clause specify the locations of the external files for each partition and subpartition.
Example 19-24 Creating a Partitioned External Table with Access Parameters Common to All Partitions
This example creates an external table named orders_external_range
that is partitioned by the date data in the order_date
column. The ACCESS PARAMETERS
clause is specified at the table level for the ORACLE_LOADER
access driver. The data_dir1
directory object is the default directory object used for the partitions month1
, month2
, and month3
. The pmax
partition specifies the data_dir2
directory object in the DEFAULT DIRECTORY
clause, so the data_dir2
directory object is used for the pmax
partition.
-- Set up directories and grant access to oe
CREATE OR REPLACE DIRECTORY data_dir1
AS '/flatfiles/data1';
CREATE OR REPLACE DIRECTORY data_dir2
AS '/flatfiles/data2';
CREATE OR REPLACE DIRECTORY bad_dir
AS '/flatfiles/bad';
CREATE OR REPLACE DIRECTORY log_dir
AS '/flatfiles/log';
GRANT READ ON DIRECTORY data_dir1 TO oe;
GRANT READ ON DIRECTORY data_dir2 TO oe;
GRANT WRITE ON DIRECTORY bad_dir TO oe;
GRANT WRITE ON DIRECTORY log_dir TO oe;
-- oe connects. Provide the user password (oe) when prompted.
CONNECT oe
-- create the partitioned external table
CREATE TABLE orders_external_range(
order_id NUMBER(12),
order_date DATE NOT NULL,
customer_id NUMBER(6) NOT NULL,
order_status NUMBER(2),
order_total NUMBER(8,2),
sales_rep_id NUMBER(6))
ORGANIZATION EXTERNAL(
TYPE ORACLE_LOADER
DEFAULT DIRECTORY data_dir1
ACCESS PARAMETERS(
RECORDS DELIMITED BY NEWLINE
BADFILE bad_dir: 'sh%a_%p.bad'
LOGFILE log_dir: 'sh%a_%p.log'
FIELDS TERMINATED BY '|'
MISSING FIELD VALUES ARE NULL))
PARALLEL
REJECT LIMIT UNLIMITED
PARTITION BY RANGE (order_date)
(PARTITION month1 VALUES LESS THAN (TO_DATE('31-12-2014', 'DD-MM-YYYY'))
LOCATION ('sales_1.csv'),
PARTITION month2 VALUES LESS THAN (TO_DATE('31-01-2015', 'DD-MM-YYYY'))
LOCATION ('sales_2.csv'),
PARTITION month3 VALUES LESS THAN (TO_DATE('28-02-2015', 'DD-MM-YYYY'))
LOCATION ('sales_3.csv'),
PARTITION pmax VALUES LESS THAN (MAXVALUE)
DEFAULT DIRECTORY data_dir2 LOCATION('sales_4.csv'));
In the previous example, the default directory data_dir2
is specified for the pmax
partition. You can also specify the directory for a specific location in this partition in the LOCATION
clause in the following way:
PARTITION pmax VALUES LESS THAN (MAXVALUE)
LOCATION ('data_dir2:sales_4.csv')
Note that, in this case, the directory data_dir2
is specified for the location sales_4.csv
, but the data_dir2
directory is not the default directory for the partition. Therefore, the default directory for the pmax
partition is the same as the default directory for the table, which is data_dir1
.
Example 19-25 Creating a Composite List-Range Partitioned External Table
This example creates an external table named accounts
that is partitioned by the data in the region
column. This partition is subpartitioned using range on the data in the balance
column. The ACCESS PARAMETERS
clause is specified at the table level for the ORACLE_LOADER
access driver. A LOCATION
clause is specified for each subpartition.
There is a table-level DEFAULT DIRECTORY
clause set to the data_dir1
directory object, and this directory object is used for all of the subpartitions, except for the following:
-
There is a partition-level
DEFAULT DIRECTORY
clause set to thedata_dir2
directory object for partitionp_southcentral
. In that partition, the following subpartitions use this default directory:p_sc_low
,p_sc_high
, andp_sc_extraordinary
. -
In partition
p_southcentral
, the subpartitionp_sc_average
has a subpartition-levelDEFAULT DIRECTORY
clause set to thedata_dir3
directory object, and this subpartition uses thedata_dir3
directory object. -
As previously stated, the default directory for the
p_sc_high
subpartition isdata_dir2
. Thep_sc_high
subpartition does not have aDEFAULT DIRECTORY
clause, and the default directorydata_dir2
is inherited from theDEFAULT DIRECTORY
specified in thePARTITION BY
clause for the partitionp_southcentral
. The files in thep_sc_high
subpartition use the following directories:-
The
psch1.csv
file usesdata_dir2
, the default directory for the subpartition. -
The
psch2.csv
file uses thedata_dir4
directory because thedata_dir4
directory is specified for that location.
-
-- Set up the directories and grant access to oe
CREATE OR REPLACE DIRECTORY data_dir1
AS '/stage/data1_dir';
CREATE OR REPLACE DIRECTORY data_dir2
AS '/stage/data2_dir';
CREATE OR REPLACE DIRECTORY data_dir3
AS '/stage/data3_dir';
CREATE OR REPLACE DIRECTORY data_dir4
AS '/stage/data4_dir';
CREATE OR REPLACE DIRECTORY bad_dir
AS '/stage/bad_dir';
CREATE OR REPLACE DIRECTORY log_dir
AS '/stage/log_dir';
GRANT READ ON DIRECTORY data_dir1 TO oe;
GRANT READ ON DIRECTORY data_dir2 TO oe;
GRANT READ ON DIRECTORY data_dir3 TO oe;
GRANT READ ON DIRECTORY data_dir4 TO oe;
GRANT WRITE ON DIRECTORY bad_dir TO oe;
GRANT WRITE ON DIRECTORY log_dir TO oe;
-- oe connects. Provide the user password (oe) when prompted.
CONNECT oe
-- create the partitioned external table
CREATE TABLE accounts
( id NUMBER,
account_number NUMBER,
customer_id NUMBER,
balance NUMBER,
branch_id NUMBER,
region VARCHAR(2),
status VARCHAR2(1)
)
ORGANIZATION EXTERNAL(
TYPE ORACLE_LOADER
DEFAULT DIRECTORY data_dir1
ACCESS PARAMETERS(
RECORDS DELIMITED BY NEWLINE
BADFILE bad_dir: 'sh%a_%p.bad'
LOGFILE log_dir: 'sh%a_%p.log'
FIELDS TERMINATED BY '|'
MISSING FIELD VALUES ARE NULL))
PARALLEL
REJECT LIMIT UNLIMITED
PARTITION BY LIST (region)
SUBPARTITION BY RANGE (balance)
( PARTITION p_northwest VALUES ('OR', 'WA')
( SUBPARTITION p_nw_low VALUES LESS THAN (1000) LOCATION ('pnwl.csv'),
SUBPARTITION p_nw_average VALUES LESS THAN (10000) LOCATION ('pnwa.csv'),
SUBPARTITION p_nw_high VALUES LESS THAN (100000) LOCATION ('pnwh.csv'),
SUBPARTITION p_nw_extraordinary VALUES LESS THAN (MAXVALUE) LOCATION ('pnwe.csv')
),
PARTITION p_southwest VALUES ('AZ', 'UT', 'NM')
( SUBPARTITION p_sw_low VALUES LESS THAN (1000) LOCATION ('pswl.csv'),
SUBPARTITION p_sw_average VALUES LESS THAN (10000) LOCATION ('pswa.csv'),
SUBPARTITION p_sw_high VALUES LESS THAN (100000) LOCATION ('pswh.csv'),
SUBPARTITION p_sw_extraordinary VALUES LESS THAN (MAXVALUE) LOCATION ('pswe.csv')
),
PARTITION p_northeast VALUES ('NY', 'VM', 'NJ')
( SUBPARTITION p_ne_low VALUES LESS THAN (1000) LOCATION ('pnel.csv'),
SUBPARTITION p_ne_average VALUES LESS THAN (10000) LOCATION ('pnea.csv'),
SUBPARTITION p_ne_high VALUES LESS THAN (100000) LOCATION ('pneh.csv'),
SUBPARTITION p_ne_extraordinary VALUES LESS THAN (MAXVALUE) LOCATION ('pnee.csv')
),
PARTITION p_southeast VALUES ('FL', 'GA')
( SUBPARTITION p_se_low VALUES LESS THAN (1000) LOCATION ('psel.csv'),
SUBPARTITION p_se_average VALUES LESS THAN (10000) LOCATION ('psea.csv'),
SUBPARTITION p_se_high VALUES LESS THAN (100000) LOCATION ('pseh.csv'),
SUBPARTITION p_se_extraordinary VALUES LESS THAN (MAXVALUE) LOCATION ('psee.csv')
),
PARTITION p_northcentral VALUES ('SD', 'WI')
( SUBPARTITION p_nc_low VALUES LESS THAN (1000) LOCATION ('pncl.csv'),
SUBPARTITION p_nc_average VALUES LESS THAN (10000) LOCATION ('pnca.csv'),
SUBPARTITION p_nc_high VALUES LESS THAN (100000) LOCATION ('pnch.csv'),
SUBPARTITION p_nc_extraordinary VALUES LESS THAN (MAXVALUE) LOCATION ('pnce.csv')
),
PARTITION p_southcentral VALUES ('OK', 'TX') DEFAULT DIRECTORY data_dir2
( SUBPARTITION p_sc_low VALUES LESS THAN (1000) LOCATION ('pscl.csv'),
SUBPARTITION p_sc_average VALUES LESS THAN (10000)
DEFAULT DIRECTORY data_dir3 LOCATION ('psca.csv'),
SUBPARTITION p_sc_high VALUES LESS THAN (100000)
LOCATION ('psch1.csv','data_dir4:psch2.csv'),
SUBPARTITION p_sc_extraordinary VALUES LESS THAN (MAXVALUE)
LOCATION ('psce.csv')
)
);
Parent topic: Partitioning External Tables
19.15.7.4 Altering a Partitioned External Table
You can use the ALTER TABLE
statement to modify table-level external parameters, but not the partition-level and subpartition-level parameters, of a partitioned external table.
The locations of external files are specified in the PARTITION BY
and SUBPARTITION BY
clauses. External files for a partition are specified in the partition’s PARTITION BY
clause. External files for a subpartition are specified in the subpartition's SUBPARTITION BY
clause.
The only exception is that the LOCATION
clause cannot be specified at the table level during the creation of a partitioned external table. Therefore, the LOCATION
clause cannot be added at the table level in an ALTER TABLE
statement that modifies a partitioned external table.
At the partition level, only ADD
, DROP
, and RENAME
operations are supported. An ALTER TABLE
statement cannot modify the attributes of existing partitions and subpartitions. However, you can include the DEFAULT DIRECTORY
and LOCATION
clauses in a PARTITION
clause or SUBPARTITION
clause when you add a new partition or subpartition.
- Connect to the database as a user with the privileges required to alter the external table.
- Issue an
ALTER TABLE
statement.
Example 19-26 Renaming a Partition of a Partitioned External Table
This example renames a partition of the partitioned external table named orders_external_range
.
ALTER TABLE orders_external_range RENAME PARTITION pmax TO other_months;
Parent topic: Partitioning External Tables
19.15.8 Dropping External Tables
For an external table, the DROP
TABLE
statement removes only the table metadata in the database. It has no affect on the actual data, which resides outside of the database.
Parent topic: Managing External Tables
19.15.9 System and Object Privileges for External Tables
System and object privileges for external tables are a subset of those for regular table.
Only the following system privileges are applicable to external tables:
-
ALTER
ANY
TABLE
-
CREATE
ANY
TABLE
-
DROP
ANY
TABLE
-
READ
ANY
TABLE
-
SELECT
ANY
TABLE
Only the following object privileges are applicable to external tables:
-
ALTER
-
READ
-
SELECT
However, object privileges associated with a directory are:
-
READ
-
WRITE
For external tables, READ
privileges are required on directory objects that contain data sources, while WRITE
privileges are required for directory objects containing bad, log, or discard files.
Parent topic: Managing External Tables
19.15.10 Using SQL*Loader for External Tables with Partition Values in File Paths
To enhance management of large numbers of data files in object stores, you can use external table partitioning with folder names as part of the file paths.
External table columns also can return the file name of the source file for each row.
Starting in Oracle Database 23ai, External table partitioning where the
partition key and partition value together (for example, /state=CA
) or
only the only the partition value (for example, /state/CA/
) comprise a
folder name in the file path. Also, an external table column can return the file name of
the source file for each row.
External tables pointing to data in the object store can consist of a large number of files. These files can be organized across multiple directories, and even multiple directory trees. The partition values can be in the directory name or file name. For example, you can have files for different months or different states in separate directories. This can be a requirement for Hive-generated tables in the object store.
Parent topic: Managing External Tables
19.16 Managing Hybrid Partitioned Tables
A hybrid partitioned table is a partitioned table in which some partitions reside in the database and some partitions reside outside the database in external files, such as operating system files or Hadoop Distributed File System (HDFS) files.
Note:
The restrictions that apply to external tables also apply to hybrid partitioned tables.
See Also:
- "Partitioning External Tables"
-
Oracle Database VLDB and Partitioning Guide for more information about managing hybrid partitioned tables
Parent topic: Managing Tables
19.17 Managing Immutable Tables
Immutable tables provide protection against unauthorized data modification.
- About Immutable Tables
Immutable tables are append-only tables that prevent unauthorized data modifications by insiders and accidental data modifications resulting from human errors. - Guidelines for Managing Immutable Tables
You can follow guidelines for working with immutable tables. - Creating Immutable Tables
Use theCREATE IMMUTABLE TABLE
statement to create an immutable table. The immutable table is created in the specified schema, and the table metadata is added to the data dictionary. - Altering Immutable Tables
You can modify the retention period for an immutable table and the retention period for rows within the immutable table. - Adding and Dropping User Columns in Immutable Tables
Beginning with version 2 immutable tables, user columns may be added or dropped. - Creating Row Versions in Immutable Tables
You can record the sequence in which immutable table rows were inserted, based on a set of columns. - Deleting Rows from Immutable Tables
Only rows that are outside the specified retention period can be deleted from an immutable table. - Dropping Immutable Tables
An immutable table can be dropped if it is empty or after it has not been modified for a period of time that is defined by its retention period. - Immutable Tables Data Dictionary Views
Data dictionary views provide information about immutable tables in the database.
Parent topic: Managing Tables
19.17.1 About Immutable Tables
Immutable tables are append-only tables that prevent unauthorized data modifications by insiders and accidental data modifications resulting from human errors.
Unauthorized modifications can be attempted by compromised or rogue employees who have access to insider credentials.
New rows can be added to an immutable table, but existing rows cannot be modified. You must specify a retention period both for the immutable table and for rows within the immutable table. Rows become obsolete after the specified row retention period. Only obsolete rows can be deleted from the immutable table.
Immutable tables contain system-generated hidden columns. The columns are the
same as those for blockchain tables. When a row is inserted, a non-NULL value is set for
the ORABCTAB_CREATION_TIME$
and ORABCTAB_USER_NUMBER$
columns. Unless row versions are used on the immutable table, the value of the remaining
system-generated hidden columns is set to NULL
.
Using immutable tables requires no changes to existing applications.
Table 19-8 Differences Between Immutable Tables and Blockchain Tables
Immutable Tables | Blockchain Tables |
---|---|
Immutable tables prevent unauthorized changes by rogue or compromised insiders who have access to user credentials. |
In addition to preventing unauthorized changes by rogue or compromised insiders, blockchain tables provide the following functionality:
|
Rows are not chained together. |
Each row, except the first row, is chained to the previous row by using a cryptographic hash. The hash value of a row is computed based on the row data and the hash value of the previous row in the chain. Any modification to a row breaks the chain, thereby indicating that the row was tampered. |
Inserting rows does not require additional processing at commit time. |
Additional processing time is required, at commit time, to chain rows. |
Related Topics
Parent topic: Managing Immutable Tables
19.17.2 Guidelines for Managing Immutable Tables
You can follow guidelines for working with immutable tables.
- Specify the Retention Period for the Immutable Table
Use theNO DROP
clause in aCREATE IMMUTABLE TABLE
statement to set the retention period for the immutable table. - Specify the Retention Period for Rows in the Immutable Table
Use theNO DELETE
clause in aCREATE IMMUTABLE TABLE
statement to specify the retention period for rows in the immutable table. - Restrictions for Immutable Tables
Using immutable tables is subject to certain restrictions.
Parent topic: Managing Immutable Tables
19.17.2.1 Specify the Retention Period for the Immutable Table
Use the NO DROP
clause in a CREATE IMMUTABLE
TABLE
statement to set the retention period for the immutable
table.
Unless the immutable table is empty, it cannot be dropped while it is within the specified retention period.
Specify one of the following clauses:
-
NO DROP
Immutable table cannot be dropped, unless it is empty.
-
NO DROP UNTIL
n
DAYS IDLE
Immutable table cannot be dropped if the newest row is less than
n
days old. The minimum value that is allowed forn
is 0. However, to ensure security of immutable tables, it is recommended that you set the minimum value to at least 16.To set the table retention period to 0 days, the initialization parameter
BLOCKCHAIN_TABLE_MAX_NO_DROP
must be set to its default value or 0. This setting is useful for testing immutable tables. Note that when this parameter is set to 0, the only allowed retention period is 0 days. To subsequently set a non-zero retention period, you must reset the value of theBLOCKCHAIN_TABLE_MAX_NO_DROP
initialization parameter.
Use the ALTER TABLE
statement to increase the retention
period for an immutable table. You cannot reduce the retention period.
Parent topic: Guidelines for Managing Immutable Tables
19.17.2.2 Specify the Retention Period for Rows in the Immutable Table
Use the NO DELETE
clause in a CREATE IMMUTABLE
TABLE
statement to specify the retention period for rows in the immutable
table.
The retention period controls when rows can be deleted from an immutable table.
Use one of the following options to specify the row retention period:
-
NO DELETE [LOCKED]
Rows cannot be deleted from the immutable table when
NO DELETE
is used.To ensure that rows are never deleted from the immutable table, use the
NO DELETE LOCKED
clause in theCREATE IMMUTABLE TABLE
statement. TheLOCKED
keyword specifies that the row retention setting cannot be modified. -
NO DELETE UNTIL
n
DAYS AFTER INSERT [LOCKED]
A row cannot be deleted until
n
days after it was added. Use theALTER TABLE
statement with theNO DELETE UNTIL
clause to modify this setting and increase the retention period. You cannot reduce the retention period.The minimum value for
n
is 16 days. IfLOCKED
is included, you cannot subsequently modify the row retention.
Parent topic: Guidelines for Managing Immutable Tables
19.17.2.3 Restrictions for Immutable Tables
Using immutable tables is subject to certain restrictions.
-
The following data types are not supported with immutable tables:
ROWID
,UROWID
,LONG
, object type, REF, varray, nested table,TIMESTAMP WITH TIME ZONE
,TIMESTAMP WITH LOCAL TIME ZONE
,BFILE
, andXMLType
.XMLType
tables are also not supported. -
Immutable tables can not be index-organized tables,
ORGANIZATION CUBE
,ORGANIZATION EXTERNAL
, or hybrid partitioned. -
For a V1 immutable table, the maximum number of user-created columns is 20 less than what is possible in an ordinary table. For a V2 immutable table, the maximum number of user-created columns is 40 less than what is possible in an ordinary table.
-
The following operations are not supported with V2 immutable tables:
-
Creating immutable tables in the CDB root or application root
-
Updating rows, merging rows, and dropping partitions
-
Truncating the immutable table
-
Sharded tables
-
Direct-path loading
-
Inserting data using parallel DML when row version is not enabled
-
Flashback table
-
Defining
BEFORE ROW
triggers that fire for update operations (other triggers are allowed) -
Creating Automatic Data Optimization (ADO) policies
-
Creating Oracle Label Security (OLS) policies
-
Online redefinition using the
DBMS_REDEFINITION
package -
Transient Logical Standby and rolling upgrades
DDL and DML on immutable tables are not supported and not replicated.
-
Logical Standby and Oracle GoldenGate
DDL and DML on immutable tables succeed on the primary database but are not replicated to standby databases.
-
Converting a regular table to an immutable table or vice versa
ON DELETE CASCADE
andON DELETE SET NULL
are not allowed forCREATE
DDL
-
-
Flashback Database and point-in-time recovery of a database undo the changes made to all tables, including immutable tables. For example, if a database is flashed back to SCN 1000, or a backup is restored and recovered up to SCN 1000, all changes since SCN 1000 are removed from the database.
Oracle Database does not prevent flashback and point-in-time recovery operations since they may be required to undo physical and logical corruptions.
-
Correctly enforcing retention policies in immutable tables relies on the system time. The privilege to change the system time must not be granted widely, and changes to the system time must be audited and reviewed.
For a list of operations supported in V1 immutable tables, see Database Administrator's Guide 21c.
Parent topic: Guidelines for Managing Immutable Tables
19.17.3 Creating Immutable Tables
Use the CREATE IMMUTABLE TABLE
statement to create an
immutable table. The immutable table is created in the specified schema, and the table
metadata is added to the data dictionary.
The COMPATIBLE
initialization parameter must be set to
19.11.0.0 or higher for a V1 immutable table and 23.0.0.0 or higher for a V2
immutable table.
The CREATE TABLE
system privilege is required to create
immutable tables in your own schema. The CREATE ANY TABLE
system
privilege is required to create immutable tables in another user's schema. The
NO DROP
and NO DELETE
clauses are mandatory in
a CREATE IMMUTABLE TABLE
statement.
Example 19-27 Creating an Immutable Table
The following example creates an immutable table named
trade_ledger
in your user schema. A row cannot be deleted until
100 days after it has been inserted. The immutable table can be dropped only after
40 days of inactivity.
CREATE IMMUTABLE TABLE trade_ledger (id NUMBER, luser VARCHAR2(40), value NUMBER)
NO DROP UNTIL 40 DAYS IDLE
NO DELETE UNTIL 100 DAYS AFTER INSERT;
Parent topic: Managing Immutable Tables
19.17.4 Altering Immutable Tables
You can modify the retention period for an immutable table and the retention period for rows within the immutable table.
The immutable table must be contained in your schema, or you must have either the
ALTER
object privilege for the immutable table or the
ALTER ANY TABLE
system privilege.
Use the ALTER TABLE
statement with the NO DROP
or
NO DELETE
clauses to alter the definition of an immutable
table.
Note that you cannot reduce the retention period for an immutable table.
Example 19-28 Modifying the Retention Period for an Immutable Table
The following statement modifies the definition of the immutable table
trade_ledger
and specifies that it cannot be dropped if the
newest row is less than 50 days old. The previous value for the NO
DROP
clause was 40 days.
ALTER TABLE trade_ledger NO DROP UNTIL 50 DAYS IDLE;
Example 19-29 Modifying the Retention Period for Immutable Tables Rows
The following statement modifies the definition of the immutable table
trade_ledger
and specifies that a row cannot be deleted until
120 days after it was created.
ALTER TABLE trade_ledger NO DELETE UNTIL 120 DAYS AFTER INSERT;
Parent topic: Managing Immutable Tables
19.17.5 Adding and Dropping User Columns in Immutable Tables
Beginning with version 2 immutable tables, user columns may be added or dropped.
You can add or drop user columns from immutable tables beginning with version 2 immutable tables. Adding or dropping user columns from version 1 immutable tables is not allowed. The physical columns and data are not actually dropped but marked as invisible.
For consistency, you can now add or drop user columns from version 2 blockchain tables.
Related Topics
Parent topic: Managing Immutable Tables
19.17.6 Creating Row Versions in Immutable Tables
You can record the sequence in which immutable table rows were inserted, based on a set of columns.
Immutable table row versions allows you to accurately track the
sequencing of related row inserts into an immutable table for a set of columns over
which row versions are defined. Oracle automatically creates a view defined for the
immutable table that allows you to see just the latest row inserted for the specific
set of column values. The view has the same columns as the immutable table and
filters all row versions except the last row version, as ordered by the hidden
column ORABCTAB_ROW_VERSION$
. The view name uses the naming
convention Immutable_Table_Name_LAST$
.
WITH ROW VERSION
clause when creating the table. The
following syntax may be
used:WITH ROW VERSION <row_version_name> (col1 [, col2 [, col3]])
The row version feature is supported for immutable tables with or without primary keys. When a primary key is defined for the immutable table, the primary key columns must not be identical to the set of row version columns.
- You can specify at most three columns with the
WITH ROW VERSION
clause. - The column types are restricted to NUMBER, CHAR, VARCHAR2, and RAW.
- The
<row_version_name>
must be supplied when creating the table. - Row versions cannot be used with version 1 immutable tables.
Parent topic: Managing Immutable Tables
19.17.7 Deleting Rows from Immutable Tables
Only rows that are outside the specified retention period can be deleted from an immutable table.
The SYS
user, the owner of an immutable table's schema,
or a database user with delete privileges on an immutable table can delete rows from
the immutable table.
Use the DBMS_IMMUTABLE_TABLE.DELETE_EXPIRED_ROWS
procedure to delete all rows that are beyond the specified retention period or
obsolete rows that were created before a specified time.
Example 19-30 Deleting all Expired Rows from an Immutable Table
The following example, when connected as SYS
, deletes
all rows in the immutable table trade_ledger
that are outside the
retention window. The number of rows deleted is stored in the output parameter
num_rows
.
DECLARE
num_rows NUMBER;
BEGIN
DBMS_IMMUTABLE_TABLE.DELETE_EXPIRED_ROWS('EXAMPLES','TRADE_LEDGER', NULL, num_rows);
DBMS_OUTPUT.PUT_LINE('Number_of_rows_deleted = ' || num_rows);
END;
/
Example 19-31 Deleting Eligible Rows Based on their Creation Time
The following example when connected as SYS
, deletes
obsolete rows that were created at least 30 days before the current system date. The
number of rows deleted is stored in the output parameter
num_rows
.
DECLARE
num_rows NUMBER;
BEGIN
DBMS_IMMUTABLE_TABLE.DELETE_EXPIRED_ROWS('EXAMPLES','TRADE_LEDGER', SYSDATE-30, num_rows);
DBMS_OUTPUT.PUT_LINE('Number_of_rows_deleted=' || num_rows);
END;
/
Parent topic: Managing Immutable Tables
19.17.8 Dropping Immutable Tables
An immutable table can be dropped if it is empty or after it has not been modified for a period of time that is defined by its retention period.
The immutable table must be contained in your schema or you must have the
DROP ANY TABLE
system privilege.
Use the DROP TABLE
statement to drop an immutable table. Dropping an
immutable table removes its definition from the data dictionary, deletes all its
rows, and deletes any indexes and triggers defined on the table.
The following statement drops the immutable table named
trade_ledger
in the examples
schema:
DROP TABLE examples.trade_ledger;
Related Topics
Parent topic: Managing Immutable Tables
19.17.9 Immutable Tables Data Dictionary Views
Data dictionary views provide information about immutable tables in the database.
Query one of the following views for information about immutable tables:
DBA_IMMUTABLE_TABLES
, USER_IMMUTABLE_TABLES
,
or ALL_IMMUTABLE_TABLES
. The information includes the row retention
period and table retention period. The DBA
view describes all the
immutable tables in the database, ALL
view describes all immutable
tables accessible to the user, and USER
view is limited to
immutable tables owned by the user. The views
DBA_IMMUTABLE_ROW_VERSION_COLS
,
USER_IMMUTABLE_ROW_VERSION_COLS
, and
ALL_IMMUTABLE_ROW_VERSION_COLS
show the columns that define row
versions in immutable tables.
When an immutable table undergoes schema evolution, columns may be added, logically
dropped, or renamed. When this occurs, a new epoch is created for the immutable
table. The views DBA_IMMUTABLE_TABLE_EPOCHS
,
ALL_IMMUTABLE_TABLE_EPOCHS
, and
USER_IMMUTABLE_TABLE_EPOCHS
show the epochs for immutable
tables. The views DBA_IMMUTABLE_TABLE_COLUMNS
,
ALL_IMMUTABLE_TABLE_COLUMNS
, and
USER_IMMUTABLE_TABLE_COLUMNS
show the valid columns in each
epoch.
Example 19-32 Displaying Immutable Table Information
The following query displays details of the immutable table
trade_ledger
in the examples schema.
SELECT row_retention "Row Retention Period", row_retention_locked "Row Retention Lock", table_inactivity_retention "Table Retention Period"
FROM dba_immutable_tables
WHERE table_name = 'TRADE_LEDGER';
Row Retention Period Row Retention Locked Table Retention Period
-------------------- -------------------- ----------------------
110 NO 16
Parent topic: Managing Immutable Tables
19.18 Managing Blockchain Tables
Blockchain tables protect data that records important actions, assets, entities, and documents from unauthorized modification or deletion by criminals, hackers, and fraud. Blockchain tables prevent unauthorized changes made using the database and detect unauthorized changes that bypass the database.
- About Blockchain Tables
Blockchain tables are insert-only tables that organize rows into a number of system and user-defined chains. Each row in a chain, except the first row, is chained to the previous row in the chain by using a cryptographic hash. - Guidelines for Managing Blockchain Tables
You can follow guidelines for creating and using blockchain tables. - Creating Blockchain Tables
You create a blockchain table using theCREATE BLOCKCHAIN TABLE
statement. This statement creates the blockchain table in the specified schema and the table metadata in the data dictionary. - Adding and Dropping User Columns in Blockchain Tables
Beginning with version 2 blockchain tables, user columns may be added or dropped. - Creating Row Versions in Blockchain Tables
Blockchain (and immutable) tables do not permit updates of existing data, but you can insert multiple versions of a row identified as part of a same record by common values in a specified set of columns. - Creating User Chains in Blockchain Tables
In addition to the system chains, you may create user-defined chains for a blockchain table. - Altering Blockchain Tables
You can modify the retention period for the blockchain table and for rows within the blockchain table. - Adding Certificates Used to Sign Blockchain Table Rows
Certificates can be used to verify the signature of a blockchain table row. - Adding the Certificate of a Certificate Authority to the Database
The digital certificate used to sign blockchain table rows is issued by a Certificate Authority. - Deleting Certificates in Blockchain Tables
Delete any certificates that are no longer required to verify the signature of blockchain table rows. - Adding a User Signature to Blockchain Table Rows
Signing a row adds a user signature for a previously created row. A signature is optional and provides additional security against tampering. - Allowing a Delegate to Sign Blockchain Table Rows
A blockchain table row may be digitally signed by a delegate instead of, or in addition to, the user that inserted the row. - Countersigning Blockchain Table Rows
The user inserting the row or a user withSIGN
privilege can request a countersignature. For a countersignature to be produced, the row must be signed by the inserting user, or by a delegate. - Validating Data in Blockchain Tables
A PL/SQL procedure verifies that rows in a blockchain table were not modified since they were inserted. - Verifying the Integrity of Blockchain Tables
Maintain the integrity of blockchain tables by continuously verifying that the blockchain table data has not been compromised. - Deleting Rows from Blockchain Tables
Only rows that are outside the retention period can be deleted from a blockchain table. - Dropping Blockchain Tables
A blockchain table can be dropped if it contains no rows or after it has not been modified for a period of time that is defined by its retention period. - Setting the Table Retention Threshold
Oracle Database prevents blockchain and immutable tables from being deleted before their idle period expires. - Determining the Data Format for Row Content to Compute Row Hash
To compute the hash value for a row, the data format for row content is determined using theDBMS_BLOCKCHAIN_TABLE.GET_BYTES_FOR_ROW_HASH
procedure. - Determining the Data Format to Compute Row Signature
You can determine the data format for the row content that is used to compute the user signature or the delegate signature of a row. The row signature is computed based on the hash value of that row. - Displaying the Byte Values of Data in Blockchain Tables
You can retrieve the byte values of data, both rows and columns, in a blockchain table. - Creating a Regular Table with Blockchain History Log
You can specify the use of a blockchain table to protect any changes tracked by Flashback Data Archive, thereby creating an immutable and cryptographically verifiable audit trail for any changes in your regular tables. - Blockchain Tables Data Dictionary Views
Data dictionary views provide information about blockchain tables.
Parent topic: Managing Tables
19.18.1 About Blockchain Tables
Blockchain tables are insert-only tables that organize rows into a number of system and user-defined chains. Each row in a chain, except the first row, is chained to the previous row in the chain by using a cryptographic hash.
Rows in a blockchain table are tamper-resistant. Each row contains a cryptographic hash value which is based on the data in that row and the hash value of the previous row in the chain. If a row is tampered with, the hash value of the row changes, and this causes the hash value of the next row in the chain to change. For enhanced fraud protection, an optional user signature can be added to a row. If you sign a blockchain table row, a digital certificate must be used. While verifying the chains in a blockchain table, the database needs the certificate to verify the row signature.
Blockchain tables can be indexed and partitioned. You can control whether and when rows are deleted from a blockchain table. You can also control whether the blockchain table can be dropped. Blockchain tables can be used along with (regular) tables in transactions and queries.
Blockchain tables can be used to implement blockchain applications where the participants trust the Oracle Database, but want a means to verify that their data has not been tampered. The participants are different database users who trust Oracle Database to maintain a verifiable, tamper-resistant blockchain of transactions. All participants must have privileges to insert data into the blockchain table. The contents of the blockchain are defined and managed by the application. By leveraging a trusted provider with verifiable crypto-secure data management practices, such applications can avoid the distributed consensus requirements. This provides most of the protection of the distributed peer-to-peer blockchains, but with much higher throughput and lower transaction latency compared to peer-to-peer blockchains using distributed consensus.
Use blockchain tables when immutability of data is critical for your centralized applications and you need to maintain a tamper-resistant ledger of current and historical transactions. You can use blockchain table to record an audit log of actions or transactions pertaining to your application. You can also build a more complete application with specific business logic using blockchain table ledger by adding triggers and stored procedures required to perform the tasks (for example, verify input data, create or transfer digital assets, and other tasks) leveraging the ledger provided by the blockchain table. You must define the triggers or stored procedures required to perform the tasks that will implement a centralized blockchain. Information Lifecycle Management (ILM) may be used to manage the lifecycle of data in blockchain tables. When the data in one or more partitions of a blockchain table is old, it can be moved to cheaper storage using ILM techniques.
- Benefits of Using Blockchain Tables
Blockchain tables address data protection challenges faced by enterprises and governments by focusing on protecting data from criminals, hackers, and fraud. - Chaining Rows in Blockchain Tables
A row in a blockchain table is chained to the previous row in the chain, and the chain of rows is verifiable by all participants. - Hidden Columns in Blockchain Tables
Each row in a blockchain table contains hidden columns whose values are managed by the database.
Parent topic: Managing Blockchain Tables
19.18.1.1 Benefits of Using Blockchain Tables
Blockchain tables address data protection challenges faced by enterprises and governments by focusing on protecting data from criminals, hackers, and fraud.
Traditional data security technologies focus on preventing unauthorized users from accessing vital data. Techniques include using passwords, privileges, encryption, and firewalls. Blockchain tables provide enhanced data security by preventing unauthorized modification or deletion of data that records important actions, assets, entities, and documents. Unauthorized modification of important records can result in loss of assets, loss of business, and possible legal issues.
Blockchain tables provide the following benefits:
-
Prevents unauthorized modification of data by insiders or criminals who use stolen insider insider credentials
This is achieved by making the table insert-only. The database does not permit modification or deletion of existing data by removing the ability of users to perform the following actions:
-
Update or delete rows
-
Convert the blockchain table to an updatable table or vice-versa
-
Modify table metadata in the database dictionary
-
-
Prevents undetected modification of data by hackers
This is achieved by using the following techniques:
-
Cryptographic chaining of blockchain table rows on insert by using database-calculated row hashes, which include the current row’s data and previous row’s hash and a corresponding PL/SQL function to verify the chains
A change to any row causes the chain to break thereby indicating that rows were subject to tampering. Cryptographic chaining is effective even when hackers take control of the database or operating system. Data changes that bypass SQL can be detected using an Oracle-provided PL/SQL function.
-
Cryptographic digest of the blockchain table generated on request and signed with the database
-