6 Binding and Defining in OCI
This chapter describes binding and defining in OCI.
This chapter contains these topics:
6.1 Overview of Binding in OCI
This chapter expands on the basic concepts of binding and defining, and provides more detailed information about the different types of binds and defines you can use in OCI applications.
Additionally, this chapter discusses the use of arrays of structures, and other issues involved in binding, defining, and character conversions.
For example, given the INSERT
statement:
INSERT INTO emp VALUES (:empno, :ename, :job, :sal, :deptno)
Then given the following variable declarations:
text *ename, *job; sword empno, sal, deptno;
the bind step makes an association between the placeholder name and the address of the program variables. The bind also indicates the data type and length of the program variables, as illustrated in Figure 6-1.
Figure 6-1 Using OCIBindByName() to Associate Placeholders with Program Variables
Description of "Figure 6-1 Using OCIBindByName() to Associate Placeholders with Program Variables"
If you change only the value of a bind variable, it is not necessary to rebind it to execute the statement again. Because the bind is by reference, as long as the address of the variable and handle remain valid, you can reexecute a statement that references the variable without rebinding.
Note:
At the interface level, all bind variables are considered at least IN
and must be properly initialized. If the variable is a pure OUT
bind variable, you can set the variable to 0. You can also provide a NULL
indicator and set that indicator to -1 (NULL
).
In the Oracle database, data types have been implemented for named data types, REF
s and LOBs, and they can be bound as placeholders in a SQL statement.
Note:
For opaque data types (descriptors or locators) whose sizes are not known, pass the address of the descriptor or locator pointer. Set the size parameter to the size of the appropriate data structure, (sizeof(structure)
).
See Also:
Steps Used in OCI Binding for the code that implements this example
6.1.1 Named Binds and Positional Binds
In a named bind, each placeholder in the statement has a name associated with it, while in a positional bind, the placeholders are referred to by their position in the statement rather than by their names.
The SQL statement in Figure 6-1 is an example of a named bind. Each placeholder in the statement has a name associated with it, such as 'ename' or 'sal'. When this statement is prepared and the placeholders are associated with values in the application, the association is made by the name of the placeholder using the OCIBindByName()
or OCIBindByName2()
call with the name of the placeholder passed in the placeholder parameter.
A second type of bind is known as a positional bind. In a positional bind, the placeholders are referred to by their position in the statement rather than by their names. For binding purposes, an association is made between an input value and the position of the placeholder, using the OCIBindByPos()
or OCIBindByPos2()
call.
To use the previous example for a positional bind:
INSERT INTO emp VALUES (:empno, :ename, :job, :sal, :deptno)
The five placeholders are then each bound by calling OCIBindByPos()
or OCIBindByPos2()
and passing the position number of the placeholder in the position
parameter. For example, the :empno
placeholder would be bound by calling OCIBindByPos()
or OCIBindByPos2()
with a position of 1, :ename
with a position of 2, and so on.
In a duplicate bind, only a single bind call may be necessary. Consider the following SQL statement, which queries the database for employees whose commission and salary are both greater than a given amount:
SELECT empno FROM emp WHERE sal > :some_value AND comm > :some_value
An OCI application could complete the binds for this statement with a single call to OCIBindByName()
or OCIBindByName2()
to bind the :some_value
placeholder by name. In this case, all bind placeholders for :some_value
get assigned the same value as provided by the OCIBindByName()
or OCIBindByName2()
call.
Now consider the case where a 6th placeholder is added that is a duplicate. For example, add :ename
as the 6th placeholder in the first previous example:
INSERT INTO emp VALUES (:empno, :ename, :job, :sal, :deptno, :ename)
If you are using the OCIBindByName()
or OCIBindByName2()
call, just one bind call suffices to bind both occurrences of the :ename
placeholder. All occurrences of :ename
in the statement will get bound to the same value. Moreover, if new bind placeholders get added as a result of which bind positions for existing bind placeholders change, you do not need to change your existing bind calls in order to update bind positions. This is a distinct advantage in using the OCIBindByName()
or OCIBindByName2()
call if your program evolves to add more bind variables in your statement text.
If you are using the OCIBindByPos()
or OCIBindByPos2()
call, however, you have increased flexibility in terms of binding duplicate bind-parameters separately, if you need it. You have the option of binding any of the duplicate occurrences of a bind parameter separately. Any unbound duplicate occurrences of a parameter inherit the value from the first occurrence of the bind parameter with the same name. The first occurrence must be explicitly bound.
In the context of SQL statements, the position n indicates the bind parameter at the nth position. However, in the context of PL/SQL statements, OCIBindByPos()
or OCIBindByPos2()
has a different interpretation for the position parameter: the position n in the bind call indicates a binding for the nth unique parameter name in the statement when scanned left to right.
Using the previous example again and the same SQL statement text, if you want to bind the 6th position separately, the :ename
placeholder would be bound by calling OCIBindByPos()
or OCIBindByPos2()
with a position of 6. Otherwise, if left unbound, :ename
would inherit the value from the first occurrence of the bind parameter with the same name, in this case, from :ename
in position 2.
See Also:
6.1.2 OCI Array Interface
You can pass data to the Oracle database in various ways.
You can execute a SQL statement repeatedly using the OCIStmtExecute()
routine and supply different input values on each iteration.
You can use the Oracle array interface and input many values with a single statement and a single call to OCIStmtExecute()
. In this case, you bind an array to an input placeholder, and the entire array can be passed at the same time, under the control of the iters parameter.
The array interface significantly reduces round-trips to the database when you are updating or inserting a large volume of data. This reduction can lead to considerable performance gains in a busy client/server environment. For example, consider an application that inserts 10 rows into the database. Calling OCIStmtExecute()
10 times with single values results in 10 network round-trips to insert all the data. The same result is possible with a single call to OCIStmtExecute()
using an input array, which involves only one network round-trip.
Beginning with Oracle Database 12c Release 2 (12.2), support is added for Hybrid Columnar Compression (HCC) with conventional DMLs, so HCC can be used during array inserts with OCI. HCC conventional array inserts are only supported for HCC tables on ASSM tablespaces. .
Note:
When you use the OCI array interface to perform inserts, row triggers in the database are fired as each row is inserted.
The maximum number of rows allowed in an array DML statement is 4 billion -1 (3,999,999,999). However, if you use ub8
instead of ub4
, this increases the maximum number of rows allowed in an array DML statement to be more than 4 billion rows.
See Also:
-
About Table Compression in Oracle Database Administrator’s Guide for information about how to configure HCC
6.1.3 About Binding Placeholders in PL/SQL
You process a PL/SQL block by placing the block in a string variable, binding any variables, and then executing the statement containing the block, just as you would with a single SQL statement.
When you bind placeholders in a PL/SQL block to program variables, you must use OCIBindByName()
or OCIBindByName2()
or OCIBindByPos()
or OCIBindByPos2()
to perform the basic binds for host variables that are either scalars or arrays.
The following short PL/SQL block contains two placeholders, which represent IN
parameters to a procedure that updates an employee's salary, when given the employee number and the new salary amount:
char plsql_statement[] = "BEGIN\ RAISE_SALARY(:emp_number, :new_sal);\ END;" ;
These placeholders can be bound to input variables in the same way as placeholders in a SQL statement.
When processing PL/SQL statements, output variables are also associated with program variables by using bind calls.
For example, consider the following PL/SQL block:
BEGIN SELECT ename,sal,comm INTO :emp_name, :salary, :commission FROM emp WHERE empno = :emp_number; END;
In this block, you would use OCIBindByName()
or OCIBindByName2()
to bind variables in place of the :emp_name
, :salary
, and :commission
output placeholders, and in place of the input placeholder :emp_number
.
Note:
All buffers, even pure OUT
buffers, must be initialized by setting the buffer length to zero in the bind call, or by setting the corresponding indicator to -1.
See Also:
-
Information for Named Data Type and REF Binds for more information about binding PL/SQL placeholders
6.1.4 Steps Used in OCI Binding
Placeholders are bound in several steps.
For a simple scalar or array bind, it is only necessary to specify an association between the placeholder and the data, by using OCIBindByName()
or OCIBindByName2()
or OCIBindByPos()
or OCIBindByPos2()
.
Once the bind is complete, the OCI library detects where to find the input data or where to put the PL/SQL output data when the SQL statement is executed. Program input data does not need to be in the program variable when it is bound to the placeholder, but the data must be there when the statement is executed.
The following code example in Example 6-1 shows handle allocation and binding for each placeholder in a SQL statement.
Note:
The checkerr()
function evaluates the return code from an OCI application. The code for the function is in the Example for OCIErrorGet()
.
Example 6-1 Handle Allocation and Binding for Each Placeholder in a SQL Statement
... /* The SQL statement, associated with stmthp (the statement handle) by calling OCIStmtPrepare2() */ text *insert = (text *) "INSERT INTO emp(empno, ename, job, sal, deptno)\ VALUES (:empno, :ename, :job, :sal, :deptno)"; ... /* Bind the placeholders in the SQL statement, one per bind handle. */ checkerr(errhp, OCIBindByName(stmthp, &bnd1p, errhp, (text *) ":ENAME", strlen(":ENAME"), (ub1 *) ename, enamelen+1, SQLT_STR, (void *) 0, (ub2 *) 0, (ub2) 0, (ub4) 0, (ub4 *) 0, OCI_DEFAULT)); checkerr(errhp, OCIBindByName(stmthp, &bnd2p, errhp, (text *) ":JOB", strlen(":JOB"), (ub1 *) job, joblen+1, SQLT_STR, (void *) &job_ind, (ub2 *) 0, (ub2) 0, (ub4) 0, (ub4 *) 0, OCI_DEFAULT)); checkerr(errhp, OCIBindByName(stmthp, &bnd3p, errhp, (text *) ":SAL", strlen(":SAL"), (ub1 *) &sal, (sword) sizeof(sal), SQLT_INT, (void *) &sal_ind, (ub2 *) 0, (ub2) 0, (ub4) 0, (ub4 *) 0, OCI_DEFAULT)); checkerr(errhp, OCIBindByName(stmthp, &bnd4p, errhp, (text *) ":DEPTNO", strlen(":DEPTNO"), (ub1 *) &deptno,(sword) sizeof(deptno), SQLT_INT, (void *) 0, (ub2 *) 0, (ub2) 0, (ub4) 0, (ub4 *) 0, OCI_DEFAULT)); checkerr(errhp, OCIBindByName(stmthp, &bnd5p, errhp, (text *) ":EMPNO", strlen(":EMPNO"), (ub1 *) &empno, (sword) sizeof(empno), SQLT_INT, (void *) 0, (ub2 *) 0, (ub2) 0, (ub4) 0, (ub4 *) 0,OCI_DEFAULT));
See Also:
6.1.5 PL/SQL Block in an OCI Program
Perhaps the most common use for PL/SQL blocks in OCI is to call stored procedures or stored functions.
Assume that there is a procedure named RAISE_SALARY
stored in the database, and you embed a call to that procedure in an anonymous PL/SQL block, and then process the PL/SQL block.
The following program fragment shows how to embed a stored procedure call in an OCI application. The program passes an employee number and a salary increase as inputs to a stored procedure called raise_salary
:
raise_salary (employee_num IN, sal_increase IN, new_salary OUT);
This procedure raises a given employee's salary by a given amount. The increased salary that results is returned in the stored procedure's variable, new_salary
, and the program displays this value.
Note that the PL/SQL procedure argument, new_salary
, although a PL/SQL OUT variable, must be bound, not defined.
Example 6-2 demonstrates how to perform a simple scalar bind where only a single bind call is necessary. In some cases, additional bind calls are needed to define attributes for specific bind data types or execution modes.
Example 6-2 Defining a PL/SQL Statement to Be Used in OCI
/* Define PL/SQL statement to be used in program. */ text *give_raise = (text *) "BEGIN\ RAISE_SALARY(:emp_number,:sal_increase, :new_salary);\ END;"; OCIBind *bnd1p = NULL; /* the first bind handle */ OCIBind *bnd2p = NULL; /* the second bind handle */ OCIBind *bnd3p = NULL; /* the third bind handle */ static void checkerr(); sb4 status; main() { sword empno, raise, new_sal; OCISession *usrhp = (OCISession *)NULL; ... /* attach to Oracle database, and perform necessary initializations and authorizations */ ... /* prepare the statement request, passing the PL/SQL text block as the statement to be prepared */ checkerr(errhp, OCIStmtPrepare2(svchp, &stmthp, errhp, (text *) give_raise, (ub4) strlen(give_raise), NULL, 0, OCI_NTV_SYNTAX, OCI_DEFAULT)); /* bind each of the placeholders to a program variable */ checkerr( errhp, OCIBindByName(stmthp, &bnd1p, errhp, (text *) ":emp_number", -1, (ub1 *) &empno, (sword) sizeof(empno), SQLT_INT, (void *) 0, (ub2 *) 0, (ub2) 0, (ub4) 0, (ub4 *) 0, OCI_DEFAULT)); checkerr( errhp, OCIBindByName(stmthp, &bnd2p, errhp, (text *) ":sal_increase", -1, (ub1 *) &raise, (sword) sizeof(raise), SQLT_INT, (void *) 0, (ub2 *) 0, (ub2) 0, (ub4) 0, (ub4 *) 0, OCI_DEFAULT)); /* remember that PL/SQL OUT variables are bound, not defined */ checkerr( errhp, OCIBindByName(stmthp, &bnd3p, errhp, (text *) ":new_salary", -1, (ub1 *) &new_sal, (sword) sizeof(new_sal), SQLT_INT, (void *) 0, (ub2 *) 0, (ub2) 0, (ub4) 0, (ub4 *) 0, OCI_DEFAULT)); /* prompt the user for input values */ printf("Enter the employee number: "); scanf("%d", &empno); /* flush the input buffer */ myfflush(); printf("Enter employee's raise: "); scanf("%d", &raise); /* flush the input buffer */ myfflush(); /* execute PL/SQL block*/ checkerr(errhp, OCIStmtExecute(svchp, stmthp, errhp, (ub4) 1, (ub4) 0, (OCISnapshot *) NULL, (OCISnapshot *) NULL, OCI_DEFAULT)); /* display the new salary, following the raise */ printf("The new salary is %d\n", new_sal); OCIStmtRelease(stmthp, errhp, NULL, 0, OCI_DEFAULT); }
See Also:
Why a PL/SQL OUT variable must be bound and not defined is explained in About Defining PL/SQL Output Variables and in Information for Named Data Type and REF Defines, and PL/SQL OUT Binds.6.2 Advanced Bind Operations in OCI
More advanced bind operations include multistep binds, and binds of named data types and REFs
.
About Binding Placeholders in OCI discussed how a basic bind operation is performed to create an association between a placeholder in a SQL statement and a program variable by using OCIBindByName()
or OCIBindByName2()
or OCIBindByPos()
or OCIBindByPos2()
. This section covers more advanced bind operations, including multistep binds, and binds of named data types and REFs
.
In some cases, additional bind calls are necessary to define specific attributes for certain bind data types or certain execution modes.
The following sections describe these special cases, and the information about binding is summarized in Table 6-1.
Table 6-1 Information Summary for Bind Types
Type of Bind | Bind Data Type | Notes |
---|---|---|
Scalar |
Any scalar data type |
Bind a single scalar using |
Array of scalars |
Any scalar data type |
Bind an array of scalars using |
Named data type |
|
Includes records and collections Two bind calls are required:
|
Boolean |
|
Bind a Boolean using |
|
|
Two bind calls are required:
|
LOB
|
|
Allocate the LOB locator using |
Array of structures or static arrays |
Varies |
Two bind calls are required:
|
Piecewise insert |
Varies |
|
|
|
Allocate a statement handle, |
See Also:
-
Named Data Type Binds for information about binding named data types (objects)
6.2.1 About Binding LOBs
There are two ways of binding LOBs:
-
Bind the LOB locator, rather than the actual LOB values. In this case the LOB value is written or read by passing a LOB locator to the OCI LOB functions.
-
Bind the LOB value directly, without using the LOB locator.
6.2.1.1 Binding LOB Locators
Either a single locator or an array of locators can be bound in a single bind call.
In each case, the application must pass the address of a LOB locator and not the locator itself. For example, suppose that an application has prepared this SQL statement where one_lob
is a bind variable corresponding to a LOB column:
INSERT INTO some_table VALUES (:one_lob)
Then your application makes the following declaration:
OCILobLocator * one_lob;
Then the calls in Example 6-3 would be used to bind the placeholder and execute the statement:
You can also insert an array using the same SQL INSERT
statement. In this case, the application would include the code shown in Example 6-4.
You must allocate descriptors with the OCIDescriptorAlloc()
function before they can be used. In an array of locators, you must initialize each array element using OCIDescriptorAlloc()
. Use OCI_DTYPE_LOB
as the type
parameter when allocating BLOB
s, CLOB
s, and NCLOB
s. Use OCI_DTYPE_FILE
when allocating BFILE
s.
Example 6-3 Binding the Placeholder and Executing the Statement to Insert a Single Locator
/* initialize single locator */ OCIDescriptorAlloc(..., &one_lob, OCI_DTYPE_LOB,...); ... /* pass the address of the locator */ OCIBindByName(...,(void *) &one_lob,... SQLT_CLOB, ...); OCIStmtExecute(...,1,...) /* 1 is the iters parameter */
Example 6-4 Binding the Placeholder and Executing the Statement to Insert an Array of Locators
OCILobLocator * lob_array[10]; ... for (i=0; i<10, i++) OCIDescriptorAlloc(...,&lob_array[i], OCI_DTYPE_LOB,...); /* initialize array of locators */ ... OCIBindByName(...,(void *) lob_array,...); OCIStmtExecute(...,10,...); /* 10 is the iters parameter */
This section includes the following topic: Restrictions on Binding LOB Locators
See Also:
OCIDescriptorAlloc()6.2.1.1.1 Restrictions on Binding LOB Locators
What are the restrictions on binding LOB locators.
Observe the following restrictions when you bind LOB locators:
-
Piecewise and callback
INSERT
orUPDATE
operations are not supported. -
When using a FILE locator as a bind variable for an
INSERT
orUPDATE
statement, you must first initialize the locator with a directory object and file name, by usingOCILobFileSetName()
before issuing theINSERT
orUPDATE
statement.
See Also:
-
LOB and BFILE Operations for more information about the OCI LOB functions
6.2.2 About Binding in OCI_DATA_AT_EXEC Mode
If the mode
parameter in a call to OCIBindByName()
or OCIBindByName2()
or OCIBindByPos()
or OCIBindByPos2()
is set to OCI_DATA_AT_EXEC
, an additional call to OCIBindDynamic()
is necessary if the application uses the callback method for providing data at run time.
The call to OCIBindDynamic()
sets up the callback routines, if necessary, for indicating the data or piece provided. If the OCI_DATA_AT_EXEC
mode is chosen, but the standard OCI piecewise polling method is used instead of callbacks, the call to OCIBindDynamic()
is not necessary.
When binding RETURN
clause variables, an application must use OCI_DATA_AT_EXEC
mode, and it must provide callbacks.
See Also:
-
Runtime Data Allocation and Piecewise Operations in OCI for more information about piecewise operations
6.3 Overview of Defining in OCI
Query statements return data from the database to your application.
When processing a query, you must define an output variable or an array of output variables for each item in the select list for retrieving data. The define step creates an association that determines where returned results are stored, and in what format.
For example, if your program processes the following statement then you would normally define two output variables: one to receive the value returned from the name
column, and one to receive the value returned from the ssn
column:
SELECT name, ssn FROM employees WHERE empno = :empnum
If you were only interested in retrieving values from the name
column, you would not need to define an output variable for ssn
. If the SELECT
statement being processed returns more than a single row for a query, the output variables that you define can be arrays instead of scalar values.
Depending on the application, the define step can occur before or after an execute operation. If you know the data types of select-list items at compile time, the define can occur before the statement is executed. If your application is processing dynamic SQL statements entered by you at run time or statements that do not have a clearly defined select list, the application must execute the statement to retrieve describe information. After the describe information is retrieved, the type information for each select-list item is available for use in defining output variables.
OCI processes the define call locally on the client side. In addition to indicating the location of buffers where results should be stored, the define step determines what data conversions must occur when data is returned to the application.
Note:
Output buffers must be 2-byte aligned.
The dty
parameter of the OCIDefineByPos()
or OCIDefineByPos2()
call specifies the data type of the output variable. OCI can perform a wide range of data conversions when data is fetched into the output variable. For example, internal data in Oracle DATE
format can be automatically converted to a String
data type on output.
This section includes the following topic: Steps Used in OCI Defining
See Also:
-
Data Types for more information about data types and conversions
6.3.1 Steps Used in OCI Defining
A basic define is done with a position call, OCIDefineByPos()
or OCIDefineByPos2()
.
This step creates an association between a select-list item and an output variable. Additional define calls may be necessary for certain data types or fetch modes. Once the define step is complete, the OCI library determines where to put retrieved data. You can make your define calls again to redefine the output variables without having to reprepare or reexecute the SQL statement.
Example 6-5 shows a scalar output variable being defined following an execute and describe operation.
See Also:
-
About Describing Select-List Items for an explanation of the describe step
Example 6-5 Defining a Scalar Output Variable Following an Execute and Describe Operation
SELECT department_name FROM departments WHERE department_id = :dept_input /* The input placeholder was bound earlier, and the data comes from the user input below */ printf("Enter employee dept: "); scanf("%d", &deptno); /* Execute the statement. If OCIStmtExecute() returns OCI_NO_DATA, meaning that no data matches the query, then the department number is invalid. */ if ((status = OCIStmtExecute(svchp, stmthp, errhp, 0, 0, (OCISnapshot *) 0, (OCISnapshot *) 0, OCI_DEFAULT)) && (status != OCI_NO_DATA)) { checkerr(errhp, status); return OCI_ERROR; } if (status == OCI_NO_DATA) { printf("The dept you entered does not exist.\n"); return 0; } /* The next two statements describe the select-list item, dname, and return its length */ checkerr(errhp, OCIParamGet((void *)stmthp, (ub4) OCI_HTYPE_STMT, errhp, (void **)&parmdp, (ub4) 1)); checkerr(errhp, OCIAttrGet((void*) parmdp, (ub4) OCI_DTYPE_PARAM, (void*) &deptlen, (ub4 *) &sizelen, (ub4) OCI_ATTR_DATA_SIZE, (OCIError *) errhp )); /* Use the retrieved length of dname to allocate an output buffer, and then define the output variable. If the define call returns an error, exit the application */ dept = (text *) malloc((int) deptlen + 1); if (status = OCIDefineByPos(stmthp, &defnp, errhp, 1, (void *) dept, (sb4) deptlen+1, SQLT_STR, (void *) 0, (ub2 *) 0, (ub2 *) 0, OCI_DEFAULT)) { checkerr(errhp, status); return OCI_ERROR; }
6.4 Advanced Define Operations in OCI
This section covers advanced define operations, including multistep defines and defines of named data types and REF
s.
In some cases, the define step requires additional calls than just a call to OCIDefineByPos()
or OCIDefineByPos2()
; for example, that define the attributes of an array fetch, OCIDefineArrayOfStruct()
, or a named data type fetch, OCIDefineObject()
. For example, to fetch multiple rows with a column of named data types, all the three calls must be invoked for the column. To fetch multiple rows of scalar columns only, OCIDefineArrayOfStruct()
and OCIDefineByPos()
or OCIDefineByPos2()
are sufficient.
Oracle Database also provides predefined C data types that map object type attributes.
6.4.1 About Defining LOB Output Variables
There are two ways of defining LOBs:
-
Define a LOB locator, rather than the actual LOB values. In this case, the LOB value is written or read by passing a LOB locator to the OCI LOB functions.
-
Define a LOB value directly, without using the LOB locator.
6.4.1.1 About Defining LOB Locators
Either a single locator or an array of locators can be defined in a single define call. In each case, the application must pass the address of a LOB locator and not the locator itself. For example, suppose that an application has prepared the following SQL statement:
SELECT lob1 FROM some_table;
In this statement, lob1
is the LOB column, and one_lob
is a define variable corresponding to a LOB column with the following declaration:
OCILobLocator * one_lob;
Then the following calls would be used to bind the placeholder and execute the statement:
/* initialize single locator */ OCIDescriptorAlloc(...&one_lob, OCI_DTYPE_LOB...); ... /* pass the address of the locator */ OCIBindByName(...,(void *) &one_lob,... SQLT_CLOB, ...); OCIStmtExecute(...,1,...); /* 1 is the iters parameter */
You can also insert an array using this same SQL SELECT
statement. In this case, the application would include the following code:
OCILobLocator * lob_array[10]; ... for (i=0; i<10, i++) OCIDescriptorAlloc(...&lob_array[i], OCI_DTYPE_LOB...); /* initialize array of locators */ ... OCIBindByName(...,(void *) lob_array,...); OCIStmtExecute(...,10,...); /* 10 is the iters parameter */
Note that you must allocate descriptors with the OCIDescriptorAlloc()
function before they can be used. In an array of locators, you must initialize each array element using OCIDescriptorAlloc()
. Use OCI_DTYPE_LOB
as the type
parameter when allocating BLOB
s, CLOB
s, and NCLOB
s. Use OCI_DTYPE_FILE
when allocating BFILE
s.
6.4.1.2 About Defining LOB Data
Oracle Database allows nonzero defines for SELECT
s of any size LOB. So you can select up to the maximum allowed size of data from a LOB column using OCIDefineByPos() and PL/SQL defines. Because there can be multiple LOBs in a row, you can select the maximum size of data from each one of those LOBs in the same SELECT
statement.
The following SQL statement is the basis for Example 6-6 and Example 6-7:
CREATE TABLE lob_tab (C1 CLOB, C2 CLOB);
Example 6-6 Defining LOBs Before Execution
void select_define_before_execute() /* A function in an OCI program */ { /* The following is allowed */ ub1 buffer1[8000]; ub1 buffer2[8000]; text *select_sql = (text *)"SELECT c1, c2 FROM lob_tab"; OCIStmtPrepare(stmthp, errhp, select_sql, (ub4)strlen((char*)select_sql), (ub4) OCI_NTV_SYNTAX, (ub4) OCI_DEFAULT); OCIDefineByPos(stmthp, &defhp[0], errhp, 1, (void *)buffer1, 8000, SQLT_LNG, (void *)0, (ub2 *)0, (ub2 *)0, (ub4) OCI_DEFAULT); OCIDefineByPos(stmthp, &defhp[1], errhp, 2, (void *)buffer2, 8000, SQLT_LNG, (void *)0, (ub2 *)0, (ub2 *)0, (ub4) OCI_DEFAULT); OCIStmtExecute(svchp, stmthp, errhp, 1, 0, (OCISnapshot *)0, (OCISnapshot *)0, OCI_DEFAULT); }
Example 6-7 Defining LOBs After Execution
void select_execute_before_define() { /* The following is allowed */ ub1 buffer1[8000]; ub1 buffer2[8000]; text *select_sql = (text *)"SELECT c1, c2 FROM lob_tab"; OCIStmtPrepare(stmthp, errhp, select_sql, (ub4)strlen((char*)select_sql), (ub4) OCI_NTV_SYNTAX, (ub4) OCI_DEFAULT); OCIStmtExecute(svchp, stmthp, errhp, 0, 0, (OCISnapshot *)0, (OCISnapshot *)0, OCI_DEFAULT); OCIDefineByPos(stmthp, &defhp[0], errhp, 1, (void *)buffer1, 8000, SQLT_LNG, (void *)0, (ub2 *)0, (ub2 *)0, (ub4) OCI_DEFAULT); OCIDefineByPos(stmthp, &defhp[1], errhp, 2, (void *)buffer2, 8000, SQLT_LNG, (void *)0, (ub2 *)0, (ub2 *)0, (ub4) OCI_DEFAULT); OCIStmtFetch(stmthp, errhp, 1, OCI_FETCH_NEXT, OCI_DEFAULT); }
6.4.2 About Defining PL/SQL Output Variables
Do not use the define calls to define output variables for select-list items in a SQL SELECT
statement inside a PL/SQL block.
Use OCI bind calls instead.
See Also:
Information for Named Data Type and REF Defines, and PL/SQL OUT Binds for more information about defining PL/SQL output variables
6.5 About Binding and Defining LOB Data
Oracle Database allows nonzero binds for INSERT
s and UPDATE
s of any size LOB.
So you can bind data into a LOB column using OCIBindByPos()
or OCIBindByPos2()
, OCIBindByName()
or OCIBindByName2()
, and PL/SQL binds.
The bind of more than 4 kilobytes of data to a LOB column uses space from the temporary tablespace. Ensure that your temporary tablespace is big enough to hold at least the amount of data equal to the sum of all the bind lengths for LOBs. If your temporary tablespace is extendable, it is extended automatically after the existing space is fully consumed. Use the following command to create an extendable temporary tablespace:
CREATE TABLESPACE ... AUTOEXTEND ON ... TEMPORARY ...;
See Also:
6.5.1 Restrictions on Binding LOB Data
What are the restrictions on binding LOB data.
Observe the following restrictions when you bind LOB data:
-
If a table has both
LONG
and LOB columns, then you can have binds of greater than 4 kilobytes for either theLONG
column or the LOB columns, but not both in the same statement. -
In an
INSERT
AS
SELECT
operation, Oracle Database does not allow binding of any length data to LOB columns. -
A special consideration applies on the maximum size of bind variables that are neither LONG or LOB, but that appear after any LOB or LONG bind variable in the SQL statement. You receive an
ORA-24816
error from Oracle Database if the maximum size for such bind variables exceeds 4000 bytes. To avoid this error, you must setOCI_ATTR_MAXDATA_SIZE
to 4000 bytes for any such binds whose maximum size may exceed 4000 bytes on the server side after character set conversion. Alternatively, reorder the binds so that such binds are placed before any LONG or LOBs in the bind list. -
Oracle Database does not do implicit conversions, such as
HEX
toRAW
orRAW
toHEX
, for data of size more than 4000 bytes. The PL/SQL code in the following code example illustrates this:Demonstrating Some Implicit Conversions That Cannot Be Done
create table t (c1 clob, c2 blob); declare text varchar(32767); binbuf raw(32767); begin text := lpad ('a', 12000, 'a'); binbuf := utl_raw.cast_to_raw(text); -- The following works: insert into t values (text, binbuf); -- The following does not work because Oracle dpes not do implicit -- hex to raw conversion. insert into t (c2) values (text); -- The following does not work because Oracle does not do implicit -- raw to hex conversion. insert into t (c1) values (binbuf); -- The following does not work because you cannot combine the -- utl_raw.cast_to_raw() operator with the >4k bind. insert into t (c2) values (utl_raw.cast_to_raw(text)); end; /
-
If you bind more than 4000 bytes of data to a
BLOB
or aCLOB
, and the data is filtered by a SQL operator, then Oracle Database limits the size of the result to at most 4000 bytes.For example:
create table t (c1 clob, c2 blob); -- The following command inserts only 4000 bytes because the result of -- LPAD is limited to 4000 bytes insert into t(c1) values (lpad('a', 5000, 'a')); -- The following command inserts only 2000 bytes because the result of -- LPAD is limited to 4000 bytes, and the implicit hex to raw conversion -- converts it to 2000 bytes of RAW data. insert into t(c2) values (lpad('a', 5000, 'a'));
6.5.2 Getting the LOB Length when Selecting LOB Data
When a lob column is accessed using the Data Interface, the server sends the LOB data length followed by LOB data. The LOB data length is the length of the LOB data stored on the server prior to any conversions. On the OCI client side, fetched LOB data length is saved in the define handle.
The application can use OCIServerDataLengthGet()
function to
access the LOB data length right after the fetch is executed. This is available in all fetch
modes, that is, single piece, piecewise and callback. It can also be accessed inside the
callback. This function helps the application to allocate the buffer wisely and get the LOB
data. The OCIServerDataLengthGet()
function does not incur a roundtrip to the
server. It should not be used before a fetch operation. For piecewise or callback operations,
the OCIServerDataLengthGet() function must be used after the first piece is fetched.
6.5.3 Examples of Binding LOB Data
Shows some exampled of binding LOB data.
The following SQL statements are used in Example 6-8 through Example 6-15:
CREATE TABLE foo (a INTEGER ); CREATE TYPE lob_typ AS OBJECT (A1 CLOB ); CREATE TABLE lob_long_tab (C1 CLOB, C2 CLOB, CT3 lob_typ, L LONG);
Example 6-8 Allowed: Inserting into C1, C2, and L Columns Up to 8000, 8000, and 2000 Byte-Sized Bind Variable Data Values, Respectively
void insert() /* A function in an OCI program */ { /* The following is allowed */ ub1 buffer[8000]; text *insert_sql = (text *) "INSERT INTO lob_long_tab (C1, C2, L) \ VALUES (:1, :2, :3)"; OCIStmtPrepare(stmthp, errhp, insert_sql, strlen((char*)insert_sql), (ub4) OCI_NTV_SYNTAX, (ub4) OCI_DEFAULT); OCIBindByPos(stmthp, &bindhp[0], errhp, 1, (void *)buffer, 8000, SQLT_LNG, 0, 0, 0, 0, 0, (ub4) OCI_DEFAULT); OCIBindByPos(stmthp, &bindhp[1], errhp, 2, (void *)buffer, 8000, SQLT_LNG, 0, 0, 0, 0, 0, (ub4) OCI_DEFAULT); OCIBindByPos(stmthp, &bindhp[2], errhp, 3, (void *)buffer, 2000, SQLT_LNG, 0, 0, 0, 0, 0, (ub4) OCI_DEFAULT); OCIStmtExecute(svchp, stmthp, errhp, 1, 0, (OCISnapshot *) NULL, (OCISnapshot *) NULL, OCI_DEFAULT); }
Example 6-9 Allowed: Inserting into C1 and L Columns up to 2000 and 8000 Byte-Sized Bind Variable Data Values, Respectively
void insert() { /* The following is allowed */ ub1 buffer[8000]; text *insert_sql = (text *) "INSERT INTO lob_long_tab (C1, L) \ VALUES (:1, :2)"; OCIStmtPrepare(stmthp, errhp, insert_sql, strlen((char*)insert_sql), (ub4) OCI_NTV_SYNTAX, (ub4) OCI_DEFAULT); OCIBindByPos(stmthp, &bindhp[0], errhp, 1, (void *)buffer, 2000, SQLT_LNG, 0, 0, 0, 0, 0, (ub4) OCI_DEFAULT); OCIBindByPos(stmthp, &bindhp[1], errhp, 2, (void *)buffer, 8000, SQLT_LNG, 0, 0, 0, 0, 0, (ub4) OCI_DEFAULT); OCIStmtExecute(svchp, stmthp, errhp, 1, 0, (OCISnapshot *) NULL, (OCISnapshot *) NULL, OCI_DEFAULT); }
Example 6-10 Allowed: Updating C1, C2, and L Columns up to 8000, 8000, and 2000 Byte-Sized Bind Variable Data Values, Respectively
void update() { /* The following is allowed, no matter how many rows it updates */ ub1 buffer[8000]; text *update_sql = (text *)"UPDATE lob_long_tab SET \ C1 = :1, C2=:2, L=:3"; OCIStmtPrepare(stmthp, errhp, update_sql, strlen((char*)update_sql), (ub4) OCI_NTV_SYNTAX, (ub4) OCI_DEFAULT); OCIBindByPos(stmthp, &bindhp[0], errhp, 1, (void *)buffer, 8000, SQLT_LNG, 0, 0, 0, 0, 0, (ub4) OCI_DEFAULT); OCIBindByPos(stmthp, &bindhp[1], errhp, 2, (void *)buffer, 8000, SQLT_LNG, 0, 0, 0, 0, 0, (ub4) OCI_DEFAULT); OCIBindByPos(stmthp, &bindhp[2], errhp, 3, (void *)buffer, 2000, SQLT_LNG, 0, 0, 0, 0, 0, (ub4) OCI_DEFAULT); OCIStmtExecute(svchp, stmthp, errhp, 1, 0, (OCISnapshot *) NULL, (OCISnapshot *) NULL, OCI_DEFAULT); }
Example 6-11 Allowed: Updating C1, C2, and L Columns up to 2000, 2000, and 8000 Byte-Sized Bind Variable Data Values, Respectively
void update() { /* The following is allowed, no matter how many rows it updates */ ub1 buffer[8000]; text *update_sql = (text *)"UPDATE lob_long_tab SET \ C1 = :1, C2=:2, L=:3"; OCIStmtPrepare(stmthp, errhp, update_sql, strlen((char*)update_sql), (ub4) OCI_NTV_SYNTAX, (ub4) OCI_DEFAULT); OCIBindByPos(stmthp, &bindhp[0], errhp, 1, (void *)buffer, 2000, SQLT_LNG, 0, 0, 0, 0, 0, (ub4) OCI_DEFAULT); OCIBindByPos(stmthp, &bindhp[1], errhp, 2, (void *)buffer, 2000, SQLT_LNG, 0, 0, 0, 0, 0, (ub4) OCI_DEFAULT); OCIBindByPos(stmthp, &bindhp[2], errhp, 3, (void *)buffer, 8000, SQLT_LNG, 0, 0, 0, 0, 0, (ub4) OCI_DEFAULT); OCIStmtExecute(svchp, stmthp, errhp, 1, 0, (OCISnapshot *) NULL, (OCISnapshot *) NULL, OCI_DEFAULT); }
Example 6-12 Allowed: Piecewise, Callback, and Array Insert or Update Operations
void insert() { /* Piecewise, callback and array insert/update operations similar to * the allowed regular insert/update operations are also allowed */ }
Example 6-13 Not Allowed: Inserting More Than 4000 Bytes into Both LOB and LONG Columns Using the Same INSERT Statement
void insert() { /* The following is NOT allowed because you cannot insert >4000 bytes * into both LOB and LONG columns */ ub1 buffer[8000]; text *insert_sql = (text *)"INSERT INTO lob_long_tab (C1, L) \ VALUES (:1, :2)"; OCIStmtPrepare(stmthp, errhp, insert_sql, strlen((char*)insert_sql), (ub4) OCI_NTV_SYNTAX, (ub4) OCI_DEFAULT); OCIBindByPos(stmthp, &bindhp[0], errhp, 1, (void *)buffer, 8000, SQLT_LNG, 0, 0, 0, 0, 0, (ub4) OCI_DEFAULT); OCIBindByPos(stmthp, &bindhp[1], errhp, 2, (void *)buffer, 8000, SQLT_LNG, 0, 0, 0, 0, 0, (ub4) OCI_DEFAULT); OCIStmtExecute(svchp, stmthp, errhp, 1, 0, (OCISnapshot *) NULL, (OCISnapshot *) NULL, OCI_DEFAULT); }
Example 6-14 Allowed: Inserting into the CT3 LOB Column up to 2000 Byte-Sized Bind Variable Data Values
void insert() { /* Insert of data into LOB attributes is allowed */ ub1 buffer[8000]; text *insert_sql = (text *)"INSERT INTO lob_long_tab (CT3) \ VALUES (lob_typ(:1))"; OCIStmtPrepare(stmthp, errhp, insert_sql, strlen((char*)insert_sql), (ub4) OCI_NTV_SYNTAX, (ub4) OCI_DEFAULT); OCIBindByPos(stmthp, &bindhp[0], errhp, 1, (void *)buffer, 2000, SQLT_LNG, 0, 0, 0, 0, 0, (ub4) OCI_DEFAULT); OCIStmtExecute(svchp, stmthp, errhp, 1, 0, (OCISnapshot *) NULL, (OCISnapshot *) NULL, OCI_DEFAULT); }
Example 6-15 Not Allowed: Binding Any Length Data to a LOB Column in an Insert As Select Operation
void insert() { /* The following is NOT allowed because you cannot do insert as * select character data into LOB column */ ub1 buffer[8000]; text *insert_sql = (text *)"INSERT INTO lob_long_tab (C1) SELECT \ :1 from FOO"; OCIStmtPrepare(stmthp, errhp, insert_sql, strlen((char*)insert_sql), (ub4) OCI_NTV_SYNTAX, (ub4) OCI_DEFAULT); OCIBindByPos(stmthp, &bindhp[0], errhp, 1, (void *)buffer, 8000, SQLT_LNG, 0, 0, 0, 0, 0, (ub4) OCI_DEFAULT); OCIStmtExecute(svchp, stmthp, errhp, 1, 0, (OCISnapshot *) NULL, (OCISnapshot *) NULL, OCI_DEFAULT); }
6.6 About Binding and Defining JSON Data
This section describes the three possible interfaces used for performing binds and defines against the JSON type column.
6.6.1 Using JSON Descriptor Interface (SQLT_JSON)
This section describes how to perform binds using JSON descriptor Interface.
OCIJson*
, write to it,
and then use it to bind or define against JSON type target. The input data type for the
bind or define should be SQLT_JSON
. The following example code snippet
shows how to perform binds into the JSON
column:/* Bind an allocated descriptor against the JSON column */
rc = OCIBindByPos2(stmthp2, &bindhp, errhp, 2,
(void *)&jsond, /* JSON Document descriptor pointer */
0, /* Size, can be 0 */
SQLT_JSON, /* Data type of the bind is JSON */
&ind, (ub4 *)0, (ub2 *)0, (ub4)0, (ub4 *)0,
(ub4) OCI_DEFAULT );
if (rc != OCI_SUCCESS) goto err_hndlr;
/* Use an allocated descriptor to read from the JSON column */
rc = OCIDefineByPos2(stmthp1, &defhp, errhp, 1,
(void *)&jsond, /* JSON Document descriptor pointer */
0, /* Size, can be 0 */
SQLT_JSON, /* Data type of the define is JSON */
&ind, 0, 0, 0);
(ub4) OCI_DEFAULT );
if (rc != OCI_SUCCESS) goto err_hndlr;
6.6.2 Using LOB Locator Interface
This section lists the the SQL data types that correspond to LOB locators that are used to bind and define by the OCI applications.
SQLT_BLOB
– Binary LOBSQLT_CLOB
– Character LOB
Note:
In case of define, when using BLOB type, the textual JSON retrieved are UTF-8 encoded.6.6.2.1 Fetching JSON as LOBs
This section describes fetching JSON as LOBs.
- The LOB is temporary and read-only.
- You need not explicitly free the LOB. It is freed automatically at the next fetch.
6.6.3 Using Data Interface (Other SQL data types)
This section lists the other SQL data types that can be used to bind and define by the OCI applications.
SQLT_CHR
– Character stringSQLT_BIN
– Binary dataSQLT_STR
– Null-terminated stringSQLT_LNG
– Long character stringSQLT_LBI
– Long binary dataSQLT_AFC
– ANSI fixed character stringSQLT_AVC
– ANSI variable character stringSQLT_VCS
– Variable character stringSQLT_VBI
– Variable binarySQLT_VST
– OCIString typeSQLT_LVC
– LONG VARCHAR typeSQLT_LVB
– LONG VARRAW type
Note:
For the preceding SQL data types listed, the output textual JSON (defines) are also returned in the environment handle orNLS_LANG
and the conversion of textual JSON to or from the binary
JSON happens on the server.
6.6.3.1 Binds
This section lists and describes the binds.
Datatype | Conversion Details |
---|---|
SQLT_BLOB |
Auto-detection of textual JSON's encoding (UTF-8 or UTF-16) happens on server.. If BLOB data is UTF-8 or UTF-16 encoded, then textual JSON conversion to native binary JSON format happens on the server. If BLOB data is in native binary JSON format, then no conversion happens. |
|
The conversion from textual JSON data in the CLOB to native binary format happens on the server. |
|
Textual JSON is assumed to be in the client character set as set in the environment handle or in the bind handle of the column. Conversion to native binary format happens on the server. If the size is greater than 32K, then it would take long bind code path. Textual is in client character set only if
|
|
If binary data is UTF-8 or UTF-16 encoded, then textual JSON conversion to native binary JSON format happens on the server. If data is in native binary JSON format, then no conversion happens. If the size is greater than 32K, then it would take long bind code path. Allowed input values must be in JSON text format and binary JSON fomat. If data is not in unicode an error is returned. |
6.6.3.2 Defines
This section lists and describes defines.
Table 6-2 Defines
Datatype | Conversion Details |
---|---|
SQLT_BLOB |
Conversion from native binary JSON format to UTF-8 encoded textual JSON in BLOB happens on the server. Client character set has no effect. The client receives a BLOB locator and not the BLOB data itself. It is important that it returns text as it improves performance. The text can be returned as database characterset as it is twice better than returning a CLOB. |
|
Conversion from native binary JSON format to textual JSON happens on the server. The server sends a CLOB locator and not the CLOB data itself. It is important that it returns text as it improves performance. The text can be returned as database characterset as it is twice better than returning a CLOB. |
|
Conversion from native binary JSON format to textual JSON
happens on the server. The textual JSON is in the character set as
in the define handle or the environment handle. Client side
conversion happens based on client characterset. In client
characterset only if |
|
Conversion from native binary JSON format to UTF-8 encoded textual JSON happens on the server. The client character set has no effect. It is important that it returns text as it improves performance. The text can be returned as database characterset as it is twice better than returning a CLOB. |
6.7 About Array Binds and Defines with JSON Data
JSON descriptors can also work with array binds and defines. In an array of
descriptors, you must initialize each array element using OCIDescriptorAlloc
()
function before OCIStmtExecute ()
function. The following code
snippet shows an example of array binds:
OCIJson *jsond_arr[10];
...
for (i=0; i<10, i++)
OCIDescriptorAlloc(..., &jsond_arr[i], OCI_DTYPE_JSON...);
/* initialize array of JSON descriptors */
...
OCIBindByPos2(..., (void *) jsond_arr,...);
OCIStmtExecute(..., 10, ...); /* 10 is the iters parameter */
OCIJson * jsond_arr[10];
...
for (i=0; i<10, i++)
OCIDescriptorAlloc(..., &jsond_arr[i], OCI_DTYPE_JSON...);
/* initialize array of JSON descriptors */
...
OCIDefineByPos2(..., (void *) jsond_arr,...);
OCIStmtExecute(..., 10, ...); /* 10 is the iters parameter */
6.8 About Binding and Defining Arrays of Structures in OCI
Defining arrays of structures requires an initial call to OCIDefineByPos()
or OCIDefineByPos2()
.
An additional call to OCIDefineArrayOfStruct()
is necessary to set up each additional parameter, including the skip
parameter necessary for arrays of structures operations.
Using arrays of structures can simplify the processing of multirow, multicolumn operations. You can create a structure of related scalar data items, and then fetch values from the database into an array of these structures, or insert values into the database from an array of these structures.
For example, an application may need to fetch multiple rows of data from columns NAME
, AGE
, and SALARY
. The application can include the definition of a structure containing separate fields to hold the NAME
, AGE
, and SALARY
data from one row in the database table. The application would then fetch data into an array of these structures.
To perform a multirow, multicolumn operation using an array of structures, associate each column involved in the operation with a field in a structure. This association, which is part of OCIDefineArrayOfStruct()
and OCIBindArrayOfStruct()
calls, specifies where data is stored.
6.8.1 Skip Parameters
When you split column data across an array of structures, it is no longer stored contiguously in the database.
The single array of structures stores data as though it were composed of several arrays of scalars. For this reason, you must specify a skip parameter for each field that you are binding or defining. This skip parameter is the number of bytes that must be skipped in the array of structures before the same field is encountered again. In general, this is equivalent to the byte size of one structure.
Figure 6-2 shows how a skip parameter is determined. In this case, the skip parameter is the sum of the sizes of the fields field1
(2 bytes), field2
(4 bytes), and field3
(2 bytes), which is 8 bytes. This equals the size of one structure.
On some operating systems it may be necessary to set the skip parameter to sizeof
(one_array_element
) rather than sizeof
(struct
), because some compilers insert extra bytes into a structure.
Consider an array of C structures consisting of two fields, a ub4
and a ub1
:
struct demo { ub4 field1; ub1 field2; }; struct demo demo_array[MAXSIZE];
Some compilers insert 3 bytes of padding after the ub1
so that the ub4
that begins the next structure in the array is properly aligned. In this case, the following statement may return an incorrect value:
skip_parameter = sizeof(struct demo);
On some operating systems this produces a proper skip parameter of 8. On other systems, skip_parameter
is set to 5 bytes by this statement. In the latter case, use the following statement to get the correct value for the skip parameter:
skip_parameter = sizeof(demo_array[0]);
This section includes the following topic: Skip Parameters for Standard Arrays.
6.8.1.1 Skip Parameters for Standard Arrays
Arrays of structures are an extension of binding and defining arrays of single variables.
When you specify a single-variable array operation, the related skip equals the size of the data type of the array under consideration. For example, consider an array declared as follows:
text emp_names[4][20];
The skip parameter for the bind or define operation is 20. Each data element in the array is then recognized as a separate unit, rather than being part of a structure.
6.8.2 OCI Calls Used with Arrays of Structures
What calls must be used when you perform operations involving arrays of structures.
Two OCI calls must be used when you perform operations involving arrays of structures:
-
Use
OCIBindArrayOfStruct()
for binding fields in arrays of structures for input variables -
Use
OCIDefineArrayOfStruct()
for defining arrays of structures for output variables.Note:
Binding or defining for arrays of structures requires multiple calls. A call to
OCIBindByName()
orOCIBindByName2()
orOCIBindByPos()
orOCIBindByPos2()
must precede a call toOCIBindArrayOfStruct()
, and a call toOCIDefineByPos()
orOCIDefineByPos2()
must precede a call toOCIDefineArrayOfStruct()
.
6.8.3 Arrays of Structures and Indicator Variables
The implementation of arrays of structures in addition supports the use of indicator variables and return codes.
You can declare parallel arrays of column-level indicator variables and return codes that correspond to the arrays of information being fetched, inserted, or updated. These arrays can have their own skip parameters, which are specified during OCIBindArrayOfStruct()
or OCIDefineArrayOfStruct()
calls.
You can set up arrays of structures of program values and indicator variables in many ways. Consider an application that fetches data from three database columns into an array of structures containing three fields. You can set up a corresponding array of indicator variable structures of three fields, each of which is a column-level indicator variable for one of the columns being fetched from the database. A one-to-one relationship between the fields in an indicator struct and the number of select-list items is not necessary.
6.9 About Binding and Defining Multiple Buffers
You can specify multiple buffers for use with a single bind or define call.
Performance is improved because the number of round-trips is decreased when data stored at different noncontiguous addresses is not copied to one contiguous location. CPU time spent and memory used are thus reduced.
The data type OCIIOV
is defined as:
typedef struct OCIIOV { void *bfp; /* The pointer to a buffer for the data */ ub4 bfl; /* The size of the buffer */ }OCIIOV;
The value OCI_IOV
for the mode
parameter is used in the OCIBindByPos()
or OCIBindByPos2()
and OCIBindByName()
or OCIBindByName2()
functions for binding multiple buffers. If this value of mode
is specified, the address of OCIIOV
must be passed in parameter valuep
. The size of the data type must be passed in the parameter valuesz
. For example:
OCIIOV vecarr[NumBuffers]; ... /* For bind at position 1 with data type int */ OCIBindByPos(stmthp, bindp, errhp, 1, (void *)&vecarr[0], sizeof(int), ... OCI_IOV); ...
The value OCI_IOV
for the mode parameter is used in the OCIDefineByPos()
or OCIDefineByPos2()
function for defining multiple buffers. If this value of mode
is specified, the address of OCIIOV
is passed in parameter valuep
. The size of the data type must be passed in the parameter valuesz
. This mode is intended to be used for scatter or gather binding, which allows multiple buffers to be bound or defined to a position, for example column A for the first 10 rows in one buffer, next 5 rows in one buffer, and the remaining 25 rows in another buffer. That eliminates the need to allocate and copy all of them into one big buffer while doing the array execute operation.
Example 6-16 illustrates the use of the structure OCIIOV
and its mode
values.
Example 6-16 Using Multiple Bind and Define Buffers
/* The following macros mention the maximum length of the data in the * different buffers. */ #define LENGTH_DATE 10 #define LENGTH_EMP_NAME 100 /* These two macros represent the number of elements in each bind and define array */ #define NUM_BIND 30 #define NUM_DEFINE 45 /* The bind buffers for inserting dates */ char buf_1[NUM_BIND][LENGTH_DATE], char buf_2[NUM_BIND * 2][LENGTH_DATE], /* The bind buffer for inserting emp name */ char buf_3[NUM_BIND * 3][LENGTH_EMP_NAME], /* The define buffers */ char buf_4[NUM_DEFINE][LENGTH_EMP_NAME]; char buf_5[NUM_DEFINE][LENGTH_EMP_NAME]; /* The size of data value for buffers corresponding to the same column must be the same, and that value is passed in the OCIBind or Define calls. buf_4 and buf_5 above have the same data values; that is, LENGTH_EMP_NAME although the number of elements are different in the two buffers. */ OCIBind *bndhp1 = (OCIBind *)0; OCIBind *bndhp2 = (OCIBind *)0; OCIDefine *defhp = (OCIDefine *)0; OCIStmt *stmthp = (OCIStmt *)0; OCIError *errhp = (OCIError *)0; OCIIOV bvec[2], dvec[2]; /* Example of how to use indicators and return codes with this feature, showing the allocation when using with define. You allocate memory for indicator, return code, and the length buffer as one chunk of NUM_DEFINE * 2 elements. */ short *indname[NUM_DEFINE*2]; /* indicators */ ub4 *alenname[NUM_DEFINE*2]; /* return lengths */ ub2 *rcodename[NUM_DEFINE*2]; /* return codes */ static text *insertstr = "INSERT INTO EMP (EMP_NAME, JOIN_DATE) VALUES (:1, :2)"; static text *selectstr = "SELECT EMP_NAME FROM EMP"; /* Allocate environment, error handles, and so on, and then initialize the environment. */ ... /* Prepare the statement with the insert query in order to show the binds. */ OCIStmtPrepare (stmthp, errhp, insertstr, (ub4)strlen((char *)insertstr), (ub4)OCI_NTV_SYNTAX, (ub4)OCI_DEFAULT); /* Populate buffers with values. The following represents the simplest * way of populating the buffers. However, in an actual scenario * these buffers may have been populated by data received from different * sources. */ /* Store the date in the bind buffers for the date. */ strcpy(buf_1[0], "21-SEP-02"); ... strcpy(buf_1[NUM_BIND - 1], "21-OCT-02"); ... strcpy(buf_2[0], "22-OCT-02"); ... strcpy(buf_2[2*NUM_BIND - 1], "21-DEC-02"); ... memset(bvec[0], 0, sizeof(OCIIOV)); memset(bvec[1], 0, sizeof(OCIIOV)); /* Set up the addresses in the IO Vector structure */ bvec[0].bfp = buf_1[0]; /* Buffer address of the data */ bvec[0].bfl = NUM_BIND*LENGTH_DATE; /* Size of the buffer */ /* And so on for other structures as well. */ bvec[1].bfp = buf_2[0]; /* Buffer address of the data */ bvec[1].bfl = NUM_BIND*2*LENGTH_DATE; /* Size of the buffer */ /* Do the bind for date, using OCIIOV */ OCIBindByPos (stmthp, &bindhp2, errhp, 2, (void *)&bvec[0], sizeof(buf_1[0]), SQLT_STR, (void *)inddate, (ub2 *)alendate, (ub2 *)rcodedate, 0, (ub4 *)0, OCI_IOV); /* Store the employee names in the bind buffers, 3 for the names */ strcpy (buf_3[0], "JOHN "); ... strcpy (buf_3[NUM_BIND *3 - 1], "HARRY"); /* Do the bind for employee name */ OCIBindByPos (stmthp, &bindhp1, errhp, 1, buf_3[0], sizeof(buf_3[0]), SQLT_STR, (void *)indemp, (ub2 *)alenemp, (ub2 *)rcodeemp, 0, (ub4 *)0, OCI_DEFAULT); OCIStmtExecute (svchp, stmthp, errhp, NUM_BIND*3, 0, (OCISnapshot *)0, (OCISnapshot *)0, OCI_DEFAULT); ... /* Now the statement to depict defines */ /* Prepare the statement with the select query in order to show the defines */ OCIStmtPrepare(stmthp, errhp, selectstr,(ub4)strlen((char *)selectstr), (ub4)OCI_NTV_SYNTAX, (ub4)OCI_DEFAULT); memset(dvec[0], 0, sizeof(OCIIOV); memset(dvec[1], 0, sizeof(OCIIOV)); /* Set up the define vector */ dvec[0].bfp = buf_4[0]; dvec[0].bfl = NUM_DEFINE*LENGTH_EMP_NAME; dvec[1].bfp = buf_5[0]; dvec[1].bfl = NUM_DEFINE*LENGTH_EMP_NAME; /* Pass the buffers for the indicator, length of the data, and the return code. Note that the buffer where you receive the data is split into two locations, each having NUM_DEFINE number of elements. However, the indicator buffer, the actual length buffer, and the return code buffer comprise a single chunk of NUM_DEFINE * 2 elements. */ OCIDefineByPos (stmthp, &defhp, errhp, 1, (void *)&dvec[0], sizeof(buf_4[0]), SQLT_STR, (void *)indname, (ub2 *)alenname, (ub2 *)rcodename, OCI_IOV); OCIStmtExecute (svchp, stmthp, errhp, NUM_DEFINE*2, 0, (OCISnapshot*)0, (OCISnapshot*)0, OCI_DEFAULT); ...
See Also:
6.10 DML with a RETURNING Clause in OCI
This section outlines the rules for correctly implementing DML statements with the RETURNING
clause.
OCI supports the use of the RETURNING
clause with SQL INSERT
, UPDATE
, and DELETE
statements.
See Also:
-
The Database demonstration programs included with your Oracle installation for complete examples. For additional information, see OCI Demonstration Programs.
-
Oracle Database SQL Language Reference for more information about the use of the
RETURNING
clause withINSERT
,UPDATE
, orDELETE
statements
6.10.1 About Using DML with a RETURNING Clause to Combine Two SQL Statements
Using the RETURNING
clause with a DML statement enables you to combine two SQL statements into one, possibly saving a server round-trip.
This is accomplished by adding an extra clause to the traditional UPDATE
, INSERT
, and DELETE
statements. The extra clause effectively adds a query to the DML statement.
In OCI, values are returned to the application as OUT
bind variables. In the following examples, the bind variables are indicated by a preceding colon, ":". These examples assume the existence of table1
, a table that contains columns col1
, col2
, and col3
.
The following statement inserts new values into the database and then retrieves the column values of the affected row from the database, for manipulating inserted rows.
INSERT INTO table1 VALUES (:1, :2, :3) RETURNING col1, col2, col3 INTO :out1, :out2, :out3
The next example updates the values of all columns where the value of col1
falls within a given range, and then returns the affected rows that were modified.
UPDATE table1 SET col1 = col1 + :1, col2 = :2, col3 = :3 WHERE col1 >= :low AND col1 <= :high RETURNING col1, col2, col3 INTO :out1, :out2, :out3
The DELETE
statement deletes the rows where col1
value falls within a given range, and then returns the data from those rows.
DELETE FROM table1 WHERE col1 >= :low AND col2 <= :high RETURNING col1, col2, col3 INTO :out1, :out2, :out3
6.10.2 About Binding RETURNING...INTO Variables
Because both the UPDATE
and DELETE
statements can affect multiple rows in the table, and a DML statement can be executed multiple times in a single OCIStmtExecute()
call, how much data is returned may not be known at run time.
As a result, the variables corresponding to the RETURNING
...INTO
placeholders must be bound in OCI_DATA_AT_EXEC
mode. An application must define its own dynamic data handling callbacks rather than using a polling mechanism.
The returning clause can be particularly useful when working with LOBs. Normally, an application must insert an empty LOB locator into the database, and then select it back out again to operate on it. By using the RETURNING
clause, the application can combine these two steps into a single statement:
INSERT INTO some_table VALUES (:in_locator) RETURNING lob_column INTO :out_locator
An OCI application implements the placeholders in the RETURNING
clause as pure OUT
bind variables. However, all binds in the RETURNING
clause are initially IN
and must be properly initialized. To provide a valid value, you can provide a NULL
indicator and set that indicator to -1.
An application must adhere to the following rules when working with bind variables in a RETURNING
clause:
-
Bind
RETURNING
clause placeholders inOCI_DATA_AT_EXEC
mode usingOCIBindByName()
orOCIBindByName2()
orOCIBindByPos()
orOCIBindByPos2()
, followed by a call toOCIBindDynamic()
for each placeholder. -
When binding
RETURNING
clause placeholders, supply a validOUT
bind function as theocbfp
parameter of theOCIBindDynamic()
call. This function must provide storage to hold the returned data. -
The
icbfp
parameter ofOCIBindDynamic()
call should provide a default function that returnsNULL
values when called. -
The
piecep
parameter ofOCIBindDynamic()
must be set toOCI_ONE_PIECE
.
No duplicate binds are allowed in a DML statement with a RETURNING
clause, and no duplication is allowed between bind variables in the DML section and the RETURNING
section of the statement.
Note:
OCI supports only the callback mechanism for RETURNING
clause binds. The polling mechanism is not supported.
6.10.3 OCI Error Handling
The OUT
bind function provided to OCIBindDynamic()
must be prepared to receive partial results of a statement if there is an error.
If the application has issued a DML statement that is executed 10 times, and an error occurs during the fifth iteration, the Oracle database returns the data from iterations 1 through 4. The callback function is still called to receive data for the first four iterations.
6.10.4 DML with RETURNING REF...INTO Clause in OCI
The RETURNING
clause can also be used to return a REF
to an object that is being inserted into or updated in the database.
UPDATE extaddr e SET e.zip = '12345', e.state ='AZ' WHERE e.state = 'CA' AND e.zip = '95117' RETURNING REF(e), zip INTO :addref, :zip
The preceding statement updates several attributes of an object in an object table and returns a REF
to the object (and a scalar postal code (ZIP)) in the RETURNING
clause.
This section includes the following topic: Binding the Output Variable.
6.10.4.1 Binding the Output Variable
Binding the REF
output variable in an OCI application requires three steps.
The following pseudocode in Example 6-17 shows a function that performs the binds necessary for the preceding three steps.
- Set the initial bind information is set using
OCIBindByName()
orOCIBindByName2()
. - Set additional bind information for the
REF
, including the type description object (TDO), is set withOCIBindObject()
. - Make a call is made to
OCIBindDynamic()
.
Example 6-17 Binding the REF Output Variable in an OCI Application
sword bind_output(stmthp, bndhp, errhp) OCIStmt *stmthp; OCIBind *bndhp[]; OCIError *errhp; { ub4 i; /* get TDO for BindObject call */ if (OCITypeByName(envhp, errhp, svchp, (CONST text *) 0, (ub4) 0, (CONST text *) "ADDRESS_OBJECT", (ub4) strlen((CONST char *) "ADDRESS_OBJECT"), (CONST text *) 0, (ub4) 0, OCI_DURATION_SESSION, OCI_TYPEGET_HEADER, &addrtdo)) { return OCI_ERROR; } /* initial bind call for both variables */ if (OCIBindByName(stmthp, &bndhp[2], errhp, (text *) ":addref", (sb4) strlen((char *) ":addref"), (void *) 0, (sb4) sizeof(OCIRef *), SQLT_REF, (void *) 0, (ub2 *)0, (ub2 *)0, (ub4) 0, (ub4 *) 0, (ub4) OCI_DATA_AT_EXEC) || OCIBindByName(stmthp, &bndhp[3], errhp, (text *) ":zip", (sb4) strlen((char *) ":zip"), (void *) 0, (sb4) MAXZIPLEN, SQLT_CHR, (void *) 0, (ub2 *)0, (ub2 *)0, (ub4) 0, (ub4 *) 0, (ub4) OCI_DATA_AT_EXEC)) { return OCI_ERROR; } /* object bind for REF variable */ if (OCIBindObject(bndhp[2], errhp, (OCIType *) addrtdo, (void **) &addrref[0], (ub4 *) 0, (void **) 0, (ub4 *) 0)) { return OCI_ERROR; } for (i = 0; i < MAXCOLS; i++) pos[i] = i; /* dynamic binds for both RETURNING variables */ if (OCIBindDynamic(bndhp[2], errhp, (void *) &pos[0], cbf_no_data, (void *) &pos[0], cbf_get_data) || OCIBindDynamic(bndhp[3], errhp, (void *) &pos[1], cbf_no_data, (void *) &pos[1], cbf_get_data)) { return OCI_ERROR; } return OCI_SUCCESS; }
See Also:
6.10.5 Additional Notes About OCI Callbacks
When a callback function is called, the OCI_ATTR_ROWS_RETURNED
attribute of the bind handle tells the application the number of rows being returned in that particular iteration.
During the first callback of an iteration, you can allocate space for all rows that are returned for that bind variable. During subsequent callbacks of the same iteration, you increment the buffer pointer to the correct memory within the allocated space.
6.10.6 Array Interface for DML RETURNING Statements in OCI
OCI provides additional functionality for single-row DML and array DML operations in which each iteration returns more than one row.
To take advantage of this feature, you must specify an OUT buffer in the bind call that is at least as big as the iteration count specified by the OCIStmtExecute()
call. This is in addition to the bind buffers provided through callbacks.
If any of the iterations returns more than one row, then the application receives an OCI_SUCCESS_WITH_INFO
return code. In this case, the DML operation is successful. At this point, the application may choose to roll back the transaction or ignore the warning.
See Also:
6.11 Character Conversion in OCI Binding and Defining
This section discusses issues involving character conversions between the client and the server.
6.11.1 About Choosing a Character Set
If a database column containing character data is defined to be a CHAR
or VARCHAR2
or NCHAR
or NVARCHAR2
column, then a bind or define involving that column must make special considerations for dealing with character set specifications.
These considerations are necessary in case the width of the client character set is different from the server character set, and also for proper character conversion. During conversion of data between different character sets, the size of the data may increase or decrease by up to a factor of four. Ensure that buffers that are provided to hold the data are of sufficient size.
Beginning with Oracle Database 12c Release 2 (12.2), OCI provides two service context handle attributes OCI_ATTR_MAX_CHARSET_RATIO
and OCI_ATTR_MAX_NCHARSET_RATIO
to obtain the maximum character set expansion ratio from server to client character set or national character set respectively. Using these attributes lets you more efficiently allocate optimal memory of buffers before conversion so that when data is returned from the database, sufficient space can be allocated to hold it. Using these attributes is useful in scenarios where there are different character sets or national character sets between server and client.
size_t cratio;
OCIAttrGet((void *)svchp, (ub4)OCI_HTYPE_SVCCTX, (size_t *)&cratio, (ub4) 0, OCI_ATTR_MAX_CHARSET_RATIO, errhp);
printf("Conversion ratio from server to client character set is %d\n", cratio);
Conversion ratio from server to client character set is 2
size_t cratio;
OCIAttrGet((void *)svchp, (ub4)OCI_HTYPE_SVCCTX, (size_t *)&cratio, (ub4) 0, OCI_ATTR_MAX_NCHARSET_RATIO, errhp);
printf("Conversion ratio from server to client ncharset is %d\n", cratio);
Conversion ratio from server to client ncharset is 1
In some cases, it may also be easier for an application to deal with CHAR
or VARCHAR2
or with NCHAR
or NVARCHAR2
data in terms of numbers of characters, rather than numbers of bytes, which is the usual case.
6.11.1.1 Character Set Form and ID
Each OCI bind and define handle is associated with the OCI_ATTR_CHARSET_FORM
and OCI_ATTR_CHARSET_ID
attributes.
An application can set these attributes with the OCIAttrSet()
call to specify the character form and character set ID of the bind or define buffer.
The csform
attribute (OCI_ATTR_CHARSET_FORM
) indicates the character set of the client buffer for binds, and the character set in which to store fetched data for defines. It has two possible values:
-
SQLCS_IMPLICIT
- Default value indicates that the database character set ID for the bind or define buffer and the character buffer data are converted to the server database character set -
SQLCS_NCHAR
- Indicates that the national character set ID for the bind or define buffer and the client buffer data are converted to the server national character set.
If the character set ID attribute, OCI_ATTR_CHARSET_ID
, is not specified, either the default value of the database or the national character set ID of the client is used, depending on the value of csform
. They are the values specified in the NLS_LANG
and NLS_NCHAR
environment variables, respectively.
Note:
-
The data is converted and inserted into the database according to the server's database character set ID or national character set ID, regardless of the client-side character set ID.
-
OCI_ATTR_CHARSET_ID
must never be set to 0. -
The define handle attributes
OCI_ATTR_CHARSET_FORM
andOCI_ATTR_CHARSET_ID
do not affect the LOB types. LOB locators fetched from the server retain their originalcsform
s. There is noCLOB
/NCLOB
conversion as part of define conversion based on these attributes.
See Also:
-
Oracle Database SQL Language Reference for more information about
NCHAR
data
6.11.1.2 Implicit Conversion Between CHAR and NCHAR
As the result of implicit conversion between database character sets and national character sets, OCI can support cross binding and cross defining between CHAR
and NCHAR
.
Although the OCI_ATTR_CHARSET_FORM
attribute is set to SQLCS_NCHAR
, OCI enables conversion of data to the database character set if the data is inserted into a CHAR
column.
6.11.2 About Setting Client Character Sets in OCI
You can set the client character sets through the OCIEnvNlsCreate()
function parameters charset
and ncharset
.
Both of these parameters can be set as OCI_UTF16ID
. The charset
parameter controls coding of the metadata and CHAR
data. The ncharset
parameter controls coding of NCHAR
data. The function OCINlsEnvironmentVariableGet()
returns the character set from NLS_LANG
and the national character set from NLS_NCHAR
.
Example 6-18 illustrates the use of these functions (OCI provides a typedef called utext
to facilitate binding and defining of UTF-16 data):
Example 6-18 Setting the Client Character Set to OCI_UTF16ID in OCI
OCIEnv *envhp; ub2 ncsid = 2; /* we8dec */ ub2 hdlcsid, hdlncsid; OraText thename[20]; utext *selstmt = L"SELECT ename FROM emp"; /* UTF16 statement */ OCIStmt *stmthp; OCIDefine *defhp; OCIError *errhp; OCIEnvNlsCreate(OCIEnv **envhp, ..., OCI_UTF16ID, ncsid); ... OCIStmtPrepare(stmthp, ..., selstmt, ...); /* prepare UTF16 statement */ OCIDefineByPos(stmthp, defnp, ..., 1, thename, sizeof(thename), SQLT_CHR,...); OCINlsEnvironmentVariableGet(&hdlcsid, (size_t)0, OCI_NLS_CHARSET_ID, (ub2)0, (size_t*)NULL); OCIAttrSet(defnp, ..., &hdlcsid, 0, OCI_ATTR_CHARSET_ID, errhp); /* change charset ID to NLS_LANG setting*/ ...
6.11.3 About Binding Variables in OCI
Update or insert operations are done through variable binding.
When binding variables, specify the OCI_ATTR_MAXDATA_SIZE
attribute and OCI_ATTR_MAXCHAR_SIZE
attribute in the bind handle to indicate the byte and character constraints used when inserting data in to the Oracle database.
These attributes are defined as:
-
The
OCI_ATTR_MAXDATA_SIZE
attribute sets the maximum number of bytes allowed in the buffer on the server side. -
The
OCI_ATTR_MAXCHAR_SIZE
attribute sets the maximum number of characters allowed in the buffer on the server side.
See Also:
-
About Using the OCI_ATTR_MAXDATA_SIZE Attribute for more information
-
About Using the OCI_ATTR_MAXCHAR_SIZE Attribute for more information
6.11.3.1 About Using the OCI_ATTR_MAXDATA_SIZE Attribute
Every bind handle has an OCI_ATTR_MAXDATA_SIZE
attribute that specifies the number of bytes allocated on the server to accommodate client-side bind data after character set conversions.
An application typically sets OCI_ATTR_MAXDATA_SIZE
to the maximum size of the column or the size of the PL/SQL variable, depending on how it is used. Oracle Database issues an error if OCI_ATTR_MAXDATA_SIZE
is not large enough to accommodate the data after conversion, and the operation fails.
For IN/INOUT
binds, when OCI_ATTR_MAXDATA_SIZE
attribute is set, the bind buffer must be large enough to hold the number of characters multiplied by the bytes in each character of the character set.
If OCI_ATTR_MAXCHAR_SIZE
is set to a nonzero value such as 100, then if the character set has 2 bytes in each character, the minimum possible allocated size is 200 bytes.
The following scenarios demonstrate some uses of the OCI_ATTR_MAXDATA_SIZE
attribute:
-
Scenario 1:
CHAR
(source data) converted to non-CHAR
(destination column)There are implicit bind conversions of the data. The recommended value of
OCI_ATTR_MAXDATA_SIZE
is the size of the source buffer multiplied by the worst-case expansion factor between the client and Oracle Database character sets. -
Scenario 2:
CHAR
(source data) converted toCHAR
(destination column) or non-CHAR
(source data) converted toCHAR
(destination column)The recommended value of
OCI_ATTR_MAXDATA_SIZE
is the size of the column. -
Scenario 3: CHAR (source data) converted to a PL/SQL variable
In this case, the recommended value of
OCI_ATTR_MAXDATA_SIZE
is the size of the PL/SQL variable.
6.11.3.2 About Using the OCI_ATTR_MAXCHAR_SIZE Attribute
OCI_ATTR_MAXCHAR_SIZE
enables processing to work with data in terms of number of characters, rather than number of bytes.
For binds, the OCI_ATTR_MAXCHAR_SIZE
attribute sets the number of characters reserved in the Oracle database to store the bind data.
For example, if OCI_ATTR_MAXDATA_SIZE is set to 100, and OCI_ATTR_MAXCHAR_SIZE
is set to 0, then the maximum possible size of the data in the Oracle database after conversion is 100 bytes. However, if OCI_ATTR_MAXDATA_SIZE
is set to 300, and OCI_ATTR_MAXCHAR_SIZE
is set to a nonzero value, such as 100, then if the character set has 2 bytes/character, the maximum possible allocated size is 200 bytes.
For defines, the OCI_ATTR_MAXCHAR_SIZE
attribute specifies the maximum number of characters that the client application allows in the return buffer. Its derived byte length overrides the maxlength
parameter specified in the OCIDefineByPos()
or OCIDefineByPos2()
call.
Note:
Regardless of the value of the attribute OCI_ATTR_MAXCHAR_SIZE
, the buffer lengths specified in a bind or define call are always in terms of bytes. The actual length values sent and received by you are also in bytes.
See Also:
6.11.3.3 Buffer Expansion During OCI Binding
Do not set OCI_ATTR_MAXDATA_SIZE
for OUT
binds or for PL/SQL binds. Only set OCI_ATTR_MAXDATA_SIZE
for INSERT
or UPDATE
statements.
If neither of these two attributes is set, OCI expands the buffer using its best estimates.
6.11.3.3.1 IN Binds
For an IN
bind, if the underlying column was created using character-length semantics, then it is preferable to specify the constraint using OCI_ATTR_MAXCHAR_SIZE
.
As long as the actual buffer contains fewer characters than specified in OCI_ATTR_MAXCHAR_SIZE
, no constraints are violated at OCI level.
If the underlying column was created using byte-length semantics, then use OCI_ATTR_MAXDATA_SIZE
in the bind handle to specify the byte constraint on the server. If you also specify an OCI_ATTR_MAXCHAR_SIZE
value, then this constraint is imposed when allocating the receiving buffer on the server side.
6.11.3.3.2 Dynamic SQL
For dynamic SQL, you can use the explicit describe to get OCI_ATTR_DATA_SIZE
and OCI_ATTR_CHAR_SIZE
in parameter handles, as a guide for setting OCI_ATTR_MAXDATA_SIZE
and OCI_ATTR_MAXCHAR_SIZE
attributes in bind handles.
It is a good practice to specify OCI_ATTR_MAXDATA_SIZE
and OCI_ATTR_MAXCHAR_SIZE
to be no more than the actual column width in bytes or characters.
6.11.3.3.3 Buffer Expansion During Inserts
Use OCI_ATTR_MAXDATA_SIZE
to avoid unexpected behavior caused by buffer expansion during inserts.
Consider what happens when the database column has character-length semantics, and the user tries to insert data using OCIBindByPos()
or OCIBindByPos2()
or OCIBindByName()
or OCIBindByName2()
while setting only the OCI_ATTR_MAXCHAR_SIZE
to 3000 bytes. The database character set is UTF8 and the client character set is ASCII. Then, in this case although 3000 characters fits in a buffer of size 3000 bytes for the client, on the server side it might expand to more than 4000 bytes. Unless the underlying column is a LONG
or a LOB type, the server returns an error. To avoid this problem specify the OCI_ATTR_MAXDATA_SIZE
to be 4000 to guarantee that the Oracle database never exceeds 4000 bytes.
See Also:
6.11.3.4 Constraint Checking During Defining
To select data from columns into client buffers, OCI uses defined variables.
You can set an OCI_ATTR_MAXCHAR_SIZE
value on the define buffer to impose an additional character-length constraint. There is no OCI_ATTR_MAXDATA_SIZE
attribute for define handles because the buffer size in bytes serves as the limit on byte length. The define buffer size provided in the OCIDefineByPos()
or OCIDefineByPos2()
call can be used as the byte constraint.
See Also:
6.11.3.4.1 Dynamic SQL Selects
When sizing buffers for dynamic SQL, always use the OCI_ATTR_DATA_SIZE
value in the implicit describe to avoid data loss through truncation.
If the database column is created using character-length semantics known through the OCI_ATTR_CHAR_USED
attribute, then you can use the OCI_ATTR_MAXCHAR_SIZE
value to set an additional constraint on the define buffer. A maximum number of OCI_ATTR_MAXCHAR_SIZE
characters is put in the buffer.
6.11.3.4.2 Return Lengths
The following return length values are always in bytes regardless of the character-length semantics of the database.
-
The value returned in the
alen
, or the actual length field in binds and defines -
The value that appears in the length, prefixed in special data types such as
VARCHAR
andLONG
VARCHAR
-
The value of the indicator variable in case of truncation
The only exception to this rule is for string buffers in the OCI_UTF16ID
character set ID; then the return lengths are in UTF-16 units.
Note:
The buffer sizes in the bind and define calls and the piece sizes in the OCIStmtGetPieceInfo()
and OCIStmtSetPieceInfo()
and the callbacks are always in bytes.
See Also:
6.11.3.5 General Compatibility Issues for Character-Length Semantics in OCI
Character-length semantics in OCI depends on the Oracle Database release, release 9.0 or later versus release 8.1 or earlier.
-
For a release 9.0 or later client communicating with a release 8.1 or earlier Oracle Database,
OCI_ATTR_MAXCHAR_SIZE
is not known by the Oracle Database, so this value is ignored. If you specify only this value, OCI derives the correspondingOCI_ATTR_MAXDATA_SIZE
value based on the maximum number of bytes for each character for the client-side character set. -
For a release 8.1 or earlier client communicating with a release 9.0 or later Oracle Database, the client can never specify an
OCI_ATTR_MAXCHAR_SIZE
value, so the Oracle Database considers the client as always expecting byte-length semantics. This is similar to the situation when the client specifies onlyOCI_ATTR_MAXDATA_SIZE
.
So in both cases, the Oracle database and client can exchange information in an appropriate manner.
6.11.3.5.1 Code Example for Inserting and Selecting Using OCI_ATTR_MAXCHAR_SIZE
When a column is created by specifying a number N
of characters, the actual allocation in the database considers the worst case scenario.
This is shown in Example 6-19. The real number of bytes allocated is a multiple of N
, say M
times N
. Currently, M
is 3 as the maximum number of bytes allocated for each character in UTF-8.
For example, in Example 6-19, in the EMP
table, the ENAME
column is defined as 30 characters and the ADDRESS
column is defined as 80 characters. Thus, the corresponding byte lengths in the database are M*30 or 3*30=90, and M*80 or 3*80=240, respectively.
Example 6-19 Insert and Select Operations Using the OCI_ATTR_MAXCHAR_SIZE Attribute
... utext ename[31], address[81]; /* E' <= 30+ 1, D' <= 80+ 1, considering null-termination */ sb4 ename_max_chars = EC=20, address_max_chars = ED=60; /* EC <= (E' - 1), ED <= (D' - 1) */ sb4 ename_max_bytes = EB=80, address_max_bytes = DB=200; /* EB <= M * EC, DB <= M * DC */ text *insstmt = (text *)"INSERT INTO EMP(ENAME, ADDRESS) VALUES (:ENAME, \ :ADDRESS)"; text *selstmt = (text *)"SELECT ENAME, ADDRESS FROM EMP"; ... /* Inserting Column Data */ OCIStmtPrepare(stmthp1, errhp, insstmt, (ub4)strlen((char *)insstmt), (ub4)OCI_NTV_SYNTAX, (ub4)OCI_DEFAULT); OCIBindByName(stmthp1, &bnd1p, errhp, (text *)":ENAME", (sb4)strlen((char *)":ENAME"), (void *)ename, sizeof(ename), SQLT_STR, (void *)&insname_ind, (ub2 *)alenp, (ub2 *)rcodep, (ub4)maxarr_len, (ub4 *)curelep, OCI_DEFAULT); /* either */ OCIAttrSet((void *)bnd1p, (ub4)OCI_HTYPE_BIND, (void *)&ename_max_bytes, (ub4)0, (ub4)OCI_ATTR_MAXDATA_SIZE, errhp); /* or */ OCIAttrSet((void *)bnd1p, (ub4)OCI_HTYPE_BIND, (void *)&ename_max_chars, (ub4)0, (ub4)OCI_ATTR_MAXCHAR_SIZE, errhp); ... /* Retrieving Column Data */ OCIStmtPrepare(stmthp2, errhp, selstmt, strlen((char *)selstmt), (ub4)OCI_NTV_SYNTAX, (ub4)OCI_DEFAULT); OCIDefineByPos(stmthp2, &dfn1p, errhp, (ub4)1, (void *)ename, (sb4)sizeof (ename), SQLT_STR, (void *)&selname_ind, (ub2 *)alenp, (ub2 *)rcodep, (ub4)OCI_DEFAULT); /* if not called, byte semantics is by default */ OCIAttrSet((void *)dfn1p, (ub4)OCI_HTYPE_DEFINE, (void *)&ename_max_chars, (ub4)0, (ub4)OCI_ATTR_MAXCHAR_SIZE, errhp); ...
6.11.3.5.2 Code Example for UTF-16 Binding and Defining
The character set ID in bind and define of the CHAR
or VARCHAR2
, or in NCHAR
or NVARCHAR2
variant handles can be set to assume that all data is passed in UTF-16 (Unicode) encoding. To specify UTF-16, set OCI_ATTR_CHARSET_ID
= OCI_UTF16ID
.
OCI provides a typedef called utext
to facilitate binding and defining of UTF-16 data. The internal representation of utext
is a 16-bit unsigned integer, ub2
. Operating systems where the encoding scheme of the wchar_t
data type conforms to UTF-16 can easily convert utext
to the wchar_t
data type using cast operators.
Even for UTF-16 data, the buffer size in bind and define calls is assumed to be in bytes. Users should use the utext
data type as the buffer for input and output data.
Example 6-20 shows pseudocode that illustrates a bind and define for UTF-16 data.
Example 6-20 Binding and Defining UTF-16 Data
... OCIStmt *stmthp1, *stmthp2; OCIDefine *dfn1p, *dfn2p; OCIBind *bnd1p, *bnd2p; text *insstmt= (text *) "INSERT INTO EMP(ENAME, ADDRESS) VALUES (:ename, :address)"; \ text *selname = (text *) "SELECT ENAME, ADDRESS FROM EMP"; utext ename[21]; /* Name - UTF-16 */ utext address[51]; /* Address - UTF-16 */ ub2 csid = OCI_UTF16ID; sb4 ename_col_len = 20; sb4 address_col_len = 50; ... /* Inserting UTF-16 data */ OCIStmtPrepare (stmthp1, errhp, insstmt, (ub4)strlen ((char *)insstmt), (ub4)OCI_NTV_SYNTAX, (ub4)OCI_DEFAULT); OCIBindByName (stmthp1, &bnd1p, errhp, (text*)":ENAME", (sb4)strlen((char *)":ENAME"), (void *) ename, sizeof(ename), SQLT_STR, (void *)&insname_ind, (ub2 *) 0, (ub2 *) 0, (ub4) 0, (ub4 *)0, OCI_DEFAULT); OCIAttrSet ((void *) bnd1p, (ub4) OCI_HTYPE_BIND, (void *) &csid, (ub4) 0, (ub4)OCI_ATTR_CHARSET_ID, errhp); OCIAttrSet((void *) bnd1p, (ub4) OCI_HTYPE_BIND, (void *) &ename_col_len, (ub4) 0, (ub4)OCI_ATTR_MAXDATA_SIZE, errhp); ... /* Retrieving UTF-16 data */ OCIStmtPrepare (stmthp2, errhp, selname, strlen((char *) selname), (ub4)OCI_NTV_SYNTAX, (ub4)OCI_DEFAULT); OCIDefineByPos (stmthp2, &dfn1p, errhp, (ub4)1, (void *)ename, (sb4)sizeof(ename), SQLT_STR, (void *)0, (ub2 *)0, (ub2 *)0, (ub4)OCI_DEFAULT); OCIAttrSet ((void *) dfn1p, (ub4) OCI_HTYPE_DEFINE, (void *) &csid, (ub4) 0, (ub4)OCI_ATTR_CHARSET_ID, errhp); ...
See Also:
6.12 PL/SQL REF CURSORs and Nested Tables in OCI
OCI provides the ability to bind and define PL/SQL REF
CURSOR
s and nested tables.
An application can use a statement handle to bind and define these types of variables. As an example, consider this PL/SQL block:
static const text *plsql_block = (text *) "begin \ OPEN :cursor1 FOR SELECT employee_id, last_name, job_id, manager_id, \ salary, department_id \ FROM employees WHERE job_id=:job ORDER BY employee_id; \ OPEN :cursor2 FOR SELECT * FROM departments ORDER BY department_id; end;";
An application allocates a statement handle for binding by calling OCIHandleAlloc()
, and then binds the :cursor1
placeholder to the statement handle, as in the following code, where :cursor1
is bound to stm2p
.
In this code in Example 6-21, stm1p
is the statement handle for the PL/SQL block, whereas stm2p
is the statement handle that is bound as a REF
CURSOR
for later data retrieval. A value of SQLT_RSET
is passed for the dty
parameter.
As another example, consider the following:
static const text *nst_tab = (text *) "SELECT last_name, CURSOR(SELECT department_name, location_id \ FROM departments) FROM employees WHERE last_name = 'FORD'";
The second position is a nested table, which an OCI application can define as a statement handle shown in Example 6-22.
After execution, when you fetch a row into stm2p
it becomes a valid statement handle.
Note:
If you have retrieved multiple REF
CURSOR
s, you must take care when fetching them into stm2p
. If you fetch the first one, you can then perform fetches on it to retrieve its data. However, after you fetch the second REF
CURSOR
into stm2p
, you no longer have access to the data from the first REF
CURSOR
.
OCI does not support PL/SQL REF
CURSOR
s that were executed in scrollable mode.
OCI does not support scrollable REF
CURSOR
s because you cannot scroll back to the rows already fetched by a REF
CURSOR
.
Example 6-21 Binding the :cursor1 Placeholder to the Statement Handle stm2p as a REF CURSOR
status = OCIStmtPrepare (stm1p, errhp, (text *) plsql_block, strlen((char *)plsql_block), OCI_NTV_SYNTAX, OCI_DEFAULT); ... status = OCIBindByName (stm1p, (OCIBind **) &bnd1p, errhp, (text *)":cursor1", (sb4)strlen((char *)":cursor1"), (void *)&stm2p, (sb4) 0, SQLT_RSET, (void *)0, (ub2 *)0, (ub2 *)0, (ub4)0, (ub4 *)0, (ub4)OCI_DEFAULT);
Example 6-22 Defining a Nested Table (Second Position) as a Statement Handle
status = OCIStmtPrepare (stm1p, errhp, (text *) nst_tab, strlen((char *)nst_tab), OCI_NTV_SYNTAX, OCI_DEFAULT); ... status = OCIDefineByPos (stm1p, (OCIDefine **) &dfn2p, errhp, (ub4)2, (void *)&stm2p, (sb4)0, SQLT_RSET, (void *)0, (ub2 *)0, (ub2 *)0, (ub4)OCI_DEFAULT);
See Also:
6.13 Natively Describe and Bind All PL/SQL Types Including Package Types
Beginning with Oracle Database Release 12.1, OCI clients support the ability to natively describe and bind all PL/SQL types.
This includes the base scalar type Boolean, which was previously unsupported as a bind type. This also includes types declared in PL/SQL packages, such as named record or collection type (including nested table, varray and index table) or implicit record subtype (%rowtype) declared inside of a PL/SQL package specification. Native support for these features means clients can describe and bind PL/SQL types using only the provided client-side APIs.
The PL/SQL typecodes for these data types (Boolean, record, index-by BINARY_INTEGER
, and PLS_INTEGER
or BINARY_INTEGER
) are listed in Table 4-11. The equivalent SQLT
type for these PL/SQL typecodes is listed in Table 4-12. Clients must bind the specified type using the respective specified value of SQLT
type as the DTY of the bind. For example, for records, clients must bind package record types (OCI_TYPECODE_RECORD
) using SQLT_NTY
as the DTY of the bind; for collections, clients must bind all package collection types (OCI_TYPECODE_ITABLE
) using SQLT_NTY
as the DTY of the bind; and for Booleans, clients must bind Boolean types (OCI_TYPECODE_BOOLEAN
) using SQLT_BOL
as the DTY of the bind. Bind APIs: OCIBindByName()
, OCIBindByName2()
, OCIBindByPos()
, and OCIBindByPos2()
support each SQLT
type value in the DTY of the bind that represents these PL/SQL typecodes.
See Also:
6.14 Runtime Data Allocation and Piecewise Operations in OCI
You can use OCI to perform piecewise inserts, updates, and fetches of data.
You can also use OCI to provide data dynamically in case of array inserts or updates, instead of providing a static array of bind values. You can insert or retrieve a very large column as a series of chunks of smaller size, minimizing client-side memory requirements.
The size of individual pieces is determined at run time by the application and can be uniform or not.
The piecewise functionality of OCI is particularly useful when performing operations on extremely large blocks of string or binary data, operations involving database columns that store CLOB
, BLOB
, LONG
, RAW
, or LONG
RAW
data.
The piecewise fetch is complete when the final OCIStmtFetch2()
call returns a value of OCI_SUCCESS.
In both the piecewise fetch and insert, it is important to understand the sequence of calls necessary for the operation to complete successfully. For a piecewise insert, you must call OCIStmtExecute()
one time more than the number of pieces to be inserted (if callbacks are not used). This is because the first time OCIStmtExecute()
is called, it returns a value indicating that the first piece to be inserted is required. As a result, if you are inserting n pieces, you must call OCIStmtExecute()
a total of n+1 times.
Similarly, when performing a piecewise fetch, you must call OCIStmtFetch2()
once more than the number of pieces to be fetched.
See Also:
6.14.1 Valid Data Types for Piecewise Operations
Only some data types can be manipulated in pieces.
OCI applications can perform piecewise fetches, inserts, or updates of all the following data types:
-
VARCHAR2
-
STRING
-
LONG
-
LONG
RAW
-
RAW
-
CLOB
-
BLOB
Another way of using this feature for all data types is to provide data dynamically for array inserts or updates. The callbacks should always specify OCI_ONE_PIECE
for the piecep
parameter of the callback for data types that do not support piecewise operations.
6.14.2 Types of Piecewise Operations
What are the ways you can perform piecewise operations.
You can perform piecewise operations in two ways:
-
Use calls provided in the OCI library to execute piecewise operations under a polling paradigm.
-
Employ user-defined callback functions to provide the necessary information and data blocks.
When you set the mode
parameter of an OCIBindByPos()
or OCIBindByPos2()
or OCIBindByName()
or OCIBindByName2()
call to OCI_DATA_AT_EXEC
, it indicates that an OCI application is providing data for an INSERT
or UPDATE
operation dynamically at runtime.
Similarly, when you set the mode
parameter of an OCIDefineByPos()
or OCIDefineByPos2()
call to OCI_DYNAMIC_FETCH
, it indicates that an application dynamically provides allocation space for receiving data at the time of the fetch.
In each case, you can provide the runtime information for the INSERT
, UPDATE
, or FETCH
operation in one of two ways: through callback functions, or by using piecewise operations. If callbacks are desired, an additional bind or define call is necessary to register the callbacks.
The following sections give specific information about runtime data allocation and piecewise operations for inserts, updates, and fetches.
Note:
Piecewise operations are also valid for SQL and PL/SQL blocks.
See Also:
6.14.3 About Providing INSERT or UPDATE Data at Runtime
When you specify the OCI_DATA_AT_EXEC
mode in a call to OCIBindByPos()
or OCIBindByPos2()
or OCIBindByName()
or OCIBindByName2()
, the value_sz
parameter defines the total size of the data that can be provided at run time.
The application must be ready to provide to the OCI library the run time IN
data buffers on demand as many times as is necessary to complete the operation. When the allocated buffers are no longer required, they must be freed by the client.
Runtime data is provided in one of two ways:
-
You can define a callback using the
OCIBindDynamic()
function, which when called at run time returns either a piece of the data or all of it. -
If no callbacks are defined, the call to
OCIStmtExecute()
to process the SQL statement returns theOCI_NEED_DATA
error code. The client application then provides theIN/OUT
data buffer or piece using theOCIStmtSetPieceInfo()
call that specifies which bind and piece are being used.
This section includes the following topic: Performing a Piecewise Insert or Update.
6.14.3.1 Performing a Piecewise Insert or Update
Once the OCI environment has been initialized, and a database connection and session have been established, a piecewise insert begins with calls to prepare a SQL or PL/SQL statement and to bind input values.
When you are using a callback to do piecewise insert, use
OCIBindDynamic()
function. There are two parameters in
OCIBindDynamic()
function that are used by an application to
provide IN bind callback and OUT bind callback functions.
- For pure IN binds, it is mandatory to provide the IN bind callback function
parameter,
icbfp
, and the OUT bind callback function parameter,ocbfp
and the value can be NULL. - For pure OUT binds, it is mandatory to provide the OUT bind callback
function parameter,
ocbfp
, and the IN bind callback function parameter,icbfp
and the value can be NULL. - For IN/OUT binds, it is mandatory to provide both the IN bind callback
function parameter,
icbfp
and the OUT bind callback function parameter,ocbfp
.
Note:
Additional bind variables that are not part of piecewise operations may require additional bind calls, depending on their data types.
Piecewise operations using standard OCI calls rather than user-defined callbacks do
not require to call OCIBindDynamic()
function. Following the
statement preparation and bind, the application performs a series of calls to
OCIStmtExecute()
, OCIStmtGetPieceInfo()
, and
OCIStmtSetPieceInfo()
to complete the piecewise operation. Each
call to OCIStmtExecute()
returns a value that determines what
action should be performed next. In general, the application retrieves a value
indicating that the next piece must be inserted, populates a buffer with that piece,
and then executes an insert. When the last piece has been inserted, the operation is
complete.
Keep in mind that the insert buffer can be of arbitrary size and is provided at run time. In addition, each inserted piece does not need to be of the same size. The size of each piece to be inserted is established by each OCIStmtSetPieceInfo()
call.
Note:
If the same piece size is used for all inserts, and the size of the data being inserted is not evenly divisible by the piece size, the final inserted piece is expected to be smaller. You must account for this by indicating the smaller size in the final OCIStmtSetPieceInfo()
call.
The procedure is illustrated in Figure 6-3 and expanded in the steps following the figure.
The piecewise operation is complete when the final piece has been successfully inserted. This is indicated by the OCI_SUCCESS
return value from the final OCIStmtExecute()
call.
Piecewise updates are performed in a similar manner. In a piecewise update operation the insert buffer is populated with data that is being updated, and OCIStmtExecute()
is called to execute the update.
6.14.4 Piecewise Operations with PL/SQL
An OCI application can perform piecewise operations with PL/SQL for IN
, OUT
, and IN/OUT
bind variables in a method similar to that outlined previously.
Keep in mind that all placeholders in PL/SQL statements are bound, rather than defined. The call to OCIBindDynamic()
specifies the appropriate callbacks for OUT
or IN/OUT
parameters.
See Also:
6.14.5 PL/SQL Indexed Table Binding Support
PL/SQL indexed tables can be passed as IN/OUT
binds into PL/SQL anonymous blocks using OCI.
The procedure for binding PL/SQL indexed tables is quite similar to performing an array bind for SQL statements. The OCI program must bind the location of an array with other metadata for the array as follows, using either OCIBindByName()
or OCIBindByName2()
or OCIBindByPos()
or OCIBindByPos2()
. The process of binding a C array into a PL/SQL indexed table bind variable must provide the following information during the bind call:
-
void *valuep (IN/OUT)
- A pointer to a location that specifies the beginning of the array in client memory -
ub2 dty (IN)
- The data type of the elements of the array as represented on the client -
sb4 value_sz (IN)
- The maximum size (in bytes) of each element of the array as represented on the client -
ub4 maxarr_len (IN)
- The maximum number of elements of the data type the array is expected to hold in its lifetimeIf allocating the entire array up front for doing static bindings, the array must be sized sufficiently to contain
maxarr_len
number of elements, each of sizevalue_sz
. This information is also used to constrain the indexed table as seen by PL/SQL. PL/SQL cannot look up the indexed table (either for read or write) beyond this specified limit. -
ub4 *curelep (IN/OUT)
- A pointer to the number of elements in the array (from the beginning of the array) that are currently valid.This should be less than or equal to the maximum array length. Note that this information is also used to constrain the indexed table as seen by PL/SQL. For
IN
binds, PL/SQL cannot read from the indexed table beyond this specified limit. ForOUT
binds, PL/SQL can write to the indexed table beyond this limit, but not beyond themaxarr_len
limit.
For IN
indexed table binds, before performing OCIStmtExecute()
, the user must set up the current array length (*curelep
) for that execution. In addition, the user also must set up the actual length and indicator as applicable for each element of the array.
For OUT
binds, OCI must return the current array length (*curelep
) and the actual length, indicator and return code as applicable for each element of the array.
For best performance, keep the array allocated with maximum array length, and then vary the current array length between executes based on how many elements are actually being passed back and forth. Such an approach does not require repeatedly deallocating and reallocating the array for every execute, thereby helping overall application performance.
It is also possible to bind using OCI piecewise calls for PL/SQL indexed tables. Such an approach does not require preallocating the entire array up front. The OCIStmtSetPieceInfo()
and OCIStmtGetPieceInfo()
calls can be used to pass in individual elements piecewise.
This section includes the following topic: Restrictions for PL/SQL Indexed Table Binding Interface.
6.14.5.1 Restrictions for PL/SQL Indexed Table Binding Interface
What are the restrictions for the PL/SQL indexed table OCI binding interface.
The PL/SQL indexed table OCI binding interface does not support binding:
-
Arrays of ADTs or
REF
s -
Arrays of descriptor types such as LOB descriptors, ROWID descriptors, datetime or interval descriptors
-
Arrays of PLSQL record types
6.14.6 About Providing FETCH Information at Run Time
When a call is made to OCIDefineByPos()
or OCIDefineByPos2()
with the mode
parameter set to OCI_DYNAMIC_FETCH
, an application can specify information about the data buffer at the time of fetch.
You may also need to call OCIDefineDynamic()
to set a callback function that is invoked to get information about your data buffer.
Runtime data is provided in one of two ways:
-
You can define a callback using the
OCIDefineDynamic()
function. Thevalue_sz
parameter defines the maximum size of the data that is provided at run time. When the client library needs a buffer to return the fetched data, the callback is invoked to provide a runtime buffer into which either a piece of the data or all of it is returned. -
If no callbacks are defined, the
OCI_NEED_DATA
error code is returned and theOUT
data buffer or piece can then be provided by the client application by usingOCIStmtSetPieceInfo()
. TheOCIStmtGetPieceInfo()
call provides information about which define and which piece are involved.
This section includes the following topic: Performing a Piecewise Fetch
6.14.6.1 Performing a Piecewise Fetch
The fetch buffer can be of arbitrary size. In addition, each fetched piece does not need to be of the same size.
The only requirement is that the size of the final fetch must be exactly the size of the last remaining piece. The size of each piece to be fetched is established by each OCIStmtSetPieceInfo()
call. This process is illustrated in Figure 6-4 and explained in the steps following the figure.
- Initialize the OCI environment, allocate necessary handles, connect to a database, authorize a user, prepare a statement, and execute the statement by using
OCIStmtExecute()
. - Define an output variable by using
OCIDefineByPos()
orOCIDefineByPos2()
, withmode
set toOCI_DYNAMIC_FETCH
. At this point you do not need to specify the actual size of the pieces you use, but you must provide the total size of the data that is to be fetched at run time. - Call
OCIStmtFetch2()
for the first time. No data is retrieved, and theOCI_NEED_DATA
error code is returned to the application. If any other value is returned, then an error occurred. - Call
OCIStmtGetPieceInfo()
to obtain information about the piece to be fetched. Thepiecep
parameter indicates whether it is the first piece (OCI_FIRST_PIECE
), a subsequent piece (OCI_NEXT_PIECE
), or the last piece (OCI_LAST_PIECE
). - Call
OCIStmtSetPieceInfo()
to specify the fetch buffer. - Call
OCIStmtFetch2()
again to retrieve the actual piece. IfOCIStmtFetch2()
returnsOCI_SUCCESS
, all the pieces have been fetched successfully. IfOCIStmtFetch2()
returnsOCI_NEED_DATA
, return to Step 4 to process the next piece. If any other value is returned, an error occurred.
6.14.7 Piecewise Binds and Defines for LOBs
What are the ways of doing piecewise binds and defines for LOBs.
There are two:
-
Using the data interface
You can bind or define character data for
CLOB
columns usingSQLT_CHR
(VARCHAR2
) orSQLT_LNG
(LONG
) as the input data type for the following functions. You can also bind or define raw data forBLOB
columns usingSQLT_LBI
(LONG
RAW
), andSQLT_BIN
(RAW
) as the input data type for these functions:-
OCIDefineByPos()
orOCIDefineByPos2()
-
OCIBindByName()
orOCIBindByName2()
-
OCIBindByPos()
orOCIBindByPos2()
All the piecewise operations described later are supported for
CLOB
andBLOB
columns in this case. -
-
Using the LOB locator
You can bind or define a LOB locator for
CLOB
andBLOB
columns usingSQLT_CLOB
(CLOB
) orSQLT_BLOB
(BLOB
) as the input data type for the following functions.-
OCIDefineByPos()
orOCIDefineByPos2()
-
OCIBindByName()
orOCIBindByName2()
-
OCIBindByPos()
orOCIBindByPos2()
You must then call OCILob* functions to read and manipulate the data.
OCILobRead2()
andOCILobWrite2()
support piecewise and callback modes. -
See Also:
-
About Binding and Defining LOB Data for usage and examples for both
INSERT
andUPDATE statements
-
About Defining LOB Data for usage and examples of
SELECT
statements -
LOB Read and Write Callbacks for information about streaming using callbacks with
OCILobWrite2()
andOCILobRead2()