The image is a picture of the rear of the server. On the far left are two power supplies with LEDs and a plug input. They are labeled PS0 and PS1. To the right of the power supplies, at the bottom of the server, are the server LEDs. The LEDs are Power/System OK LED, Locator LED, and Fault-Service Required LED. To the right of the power supplies, at the top of the server, are the PCIe slots. There are three slots, labeled 1 PCIe3, 2 PCIe3, and 3 PCIe3. There are network cards in the first two slots, and the third slot is empty.
The network cards in PCIe3 slot 1 and PCIe3 slot 2 are not labeled. The card in PCIe3 slot 1 has two RJ45 openings. The card in PCIe3 slot 2 has two optical cable openings. Below the PCIe3 1 slot, there are two RJ45 openings, one labeled NET MGT and the other labeled NET 0, under the PCIe3 2 card. To the right of NET 0 are two 1GbE/10GbE ports, labeled NET 1 and NET 2. To the right of these ports is the text 'OR', followed by two SFP28 10GbE/25GbE ports, also labeled NET 1 and NET 2. Below the empty slot labeled PCIe3 3 there is a USB port on the left and a SER MGT port on the right.