Description of the illustration X9-2_DB_Rear

The image is a picture of the rear of the server. On the far left are two power supplies with LEDs and plug inputs. They are labeled PS0 and PS1.

To the right of the power supplies, along the top of the server, are three PCI slots labeled 1, 2, and 3. This image shows a server with two dual-port 25 Gb/s SFP28 network interface cards, in PCI slot 1 and slot 3. On each network interface card, the ports are labeled 1 and 2. PCI slot 2 contains a vented filler panel.

Below the PCI slots and to the right of the power supplies, are the following items (from left to right):

  1. Two RoCE Network Fabric ports, labeled Port 1 and Port 2.

  2. The server LEDs. The LEDs are the Locator LED, Fault-Service Required LED, and the Power/System OK LED.

  3. Two RJ45 Ethernet ports; the ILOM Service Processor (SP) port is labeled NET MGT, and the administration network port is labeled NET 0.

  4. An RJ45 serial Ethernet port, which is labeled SER MGT.

  5. A USB port.

Finally, below the USB port, there is a pin hole to access the ILOM SP reset button.