1. Quick Start Guide
  2. Connect Cables and Power On
  3. Connect Workstation

Connect Workstation

To monitor system initialization after first power-on, and to complete the initial configuration process, you need to connect a laptop or workstation to the appliance.

  1. Connect a workstation with a web browser directly to the appliance internal management network using an Ethernet cable connected to port 2 of the 1Gbps management switch.

  2. Configure the wired network connection of the workstation to use the reserved static IP address 100.96.3.254.

  3. When system initialization after first power-on has started, browse to the initial configuration interface on the virtual IP of the management node cluster at https://100.96.2.32:30099.