E Server Components
These sections describe Exadata Server X10M component names, status, and indicator states. The tables in this section identify the system components and describe the naming conventions applied to the components of Exadata Server X10M. Each section corresponds to an IPMI entity ID and lists sensors, indicators, and replaceable units related to that entity.
The tables contain the following fields:
-
Component Name – Shows the user-visible component name used in management interfaces to refer to a specific sensor, indicator, or replaceable unit. The IPMI name is a shortened form of the component name, and is indicated by the boldface portion of the component name.
-
IPMI Type – Indicates the type of sensor, indicator, or replaceable unit represented.
-
Description – Describes the particular component name reference.
-
Values – Defines the states of the sensor, indicator, or replaceable unit entity, and any specific units or values that are expected, if applicable.
This section includes information for the following server components.
System Chassis Components
The following table lists the system chassis components.
Table E-1 System Chassis Components
| Component Name (Oracle ILOM CLI Targets) | IPMI Type | Description | Values (if applicable) |
|---|---|---|---|
|
/SYS |
FRU |
Product information only |
|
|
/SYS/UUID |
FRU |
Unique system ID |
Derived from host MAC address. Used for PXE boot and licensing. |
|
/SYS/ACPI |
State sensor |
Advanced Configuration and Power Interface |
01h-ACPI_ON_WORKING 20h-ACPI_SOFT_OFF |
|
/SYS/VPS |
Threshold sensor |
Virtual power consumption sensor |
Watts |
|
/SYS/VPS_CPUS |
Threshold sensor |
Virtual power sensor - CPU power consumption |
Watts |
|
/SYS/VPS_MEMORY |
Threshold sensor |
Virtual power sensor - memory power consumption |
Watts |
|
/SYS/VPS_FANS |
Threshold sensor |
Virtual power sensor - fan power consumption |
Watts |
|
/SYS/T_AMB |
Threshold sensor |
Ambient temperature on system motherboard |
Degrees Celsius |
|
/SYS/TEMP_FAULT |
Indicator |
Temperature Fault LED |
Color: Amber Location: Front panel Off: Normal On: Chassis overtemp fault |
|
/SYS/OK |
Indicator |
System OK LED |
Color: Green Location: Front and back panels Off: Power is off. Standby blink: Host is off, awaiting Power On. Slow blink: Startup sequence initiated on host. On: Host is booting OS or running the OS. |
|
/SYS/SERVICE |
Indicator |
Fault-Service Required LED |
Color: Amber Location: Front and back panels Off: Normal On: Server requires service. |
|
/SYS/LOCATE |
Indicator |
Locate Button/LED |
Color: White Location: Front and back panels Off: Normal Fast blink: Locate function is activated; self-extinguishes after 30 minutes. |
|
/SYS/PS_FAULT |
Indicator |
Rear Power Supply Fault LED |
Color: Amber Location: Front panel Off: Normal On: General power supply fault |
|
/SYS/FAN_FAULT |
Indicator |
Top Fan Fault LED |
Color: Amber Location: Front panel Off: Normal On: General fan fault |
|
/SYS/DO_NOT_SERVICE |
Indicator |
Do Not Service LED Color: White Location: Front panel Off: Normal On: Do not service this cell |
Power Unit Components
The following table lists the power unit components.
Table E-2 Power Unit Components
| Component Name (Oracle ILOM CLI Targets) | IPMI Type | Description | Values (if applicable) |
|---|---|---|---|
|
/SYS/PDB |
FRU |
Power distribution board FRU |
|
|
/SYS/PS[0-1] |
FRU |
Power supply FRU |
|
|
/SYS/PS[0-1]/PRSNT |
Discrete sensor |
Power supply is present. (Hidden) |
01h-ENTITY_ABSENT 02h-ENTITY_PRESENT |
|
/SYS/PS[0-1]/STATE |
State sensor |
Power supply state sensor Multistate, power supply sensor type, per IPMI |
Presence detected Failure detected Predictive failure Power supply input lost Power supply input lost or out-of-range Power supply input out-of-range Configuration error |
|
/SYS/PS[0-1]/P_IN |
Threshold sensor |
Input power draw |
Watts |
|
/SYS/PS[0-1]/P_OUT |
Threshold sensor |
Output power |
Watts |
|
/SYS/PS[0-1]/V_IN |
Threshold sensor |
Power supply input voltage |
Volts |
|
/SYS/PS[0-1]/V_12V |
Threshold sensor |
Power supply 12V output voltage |
Volts |
|
/SYS/PS[0-1]/V_12V_STBY |
Threshold sensor |
Power supply 12V standby output voltage |
Volts |
|
/SYS/PS[0-1]/T_IN |
Threshold sensor |
PSU input temperature |
Degrees Celsius |
|
/SYS/PS[0-1]/T_OUT |
Threshold sensor |
PSU output temperature |
Degrees Celsius |
Cooling Unit Components
The system has six 60-mm fan modules with two fans in each module. The following table lists the system cooling unit components.
Table E-3 Cooling Unit Components
| Component Name (Oracle ILOM CLI Targets) | IPMI Type | Description | Values (if applicable) |
|---|---|---|---|
|
/SYS/MB/FM[0-5] |
FRU |
Fan module FRU |
|
|
/SYS/MB/FM[0-5]/F[0- x ] |
FRU |
Individual fan |
|
|
/SYS/MB/FM[0-5] /PRSNT |
Discrete sensor |
Fan module is present. |
01h-ENTITY_ABSENT 02h-ENTITY_PRESENT |
|
/SYS/MB/FM[0-5] /F[0-x]/TACH |
Threshold sensor |
Fan module fan speed |
RPM |
|
/SYS/MB/FM[0-5] /SERVICE |
Indicator |
Fan Fault-Service Required LED |
Color: Amber Location: Motherboard Off: Normal On: Fan module was diagnosed as faulty. |
Disk Backplane Components
The following table lists the disk backplane (DBP) components.
Table E-4 Disk Backplane Components
| Component Name (Oracle ILOM CLI Targets) | IPMI Type | Description | Values (if applicable) |
|---|---|---|---|
|
/SYS/DBP |
FRU |
Disk backplane FRU |
|
|
/SYS/DBP/PRSNT |
Discrete sensor |
Disk backplane presence (Hidden) |
01h-ENTITY_ABSENT 02h-ENTITY_PRESENT |
|
/SYS/DBP/HDD[0- x ] |
FRU |
Hard disk drives (HDD) |
|
|
/SYS/DBP/HDD[0- x ]/PRSNT |
Discrete sensor |
Hard disk drive presence(Hidden) |
01h-ENTITY_ABSENT 02h-ENTITY_PRESENT |
|
/SYS/DBP/HDD[0- x ]/STATE |
State sensor |
Hard disk drive state |
01h-FAULT_STATUS 02h-IDENTITY 04h-INSTALLED 20h-SLOT_POWER_OFF |
|
/SYS/DBP/HDD[0- x ]/SERVICE |
Indicator |
Fault-Service Required LED |
Color: Amber Location: HDD Off: Normal On: HDD was diagnosed as failed |
|
/SYS/DBP/HDD[0- x ]/OK2RM |
Indicator |
Hard disk drive OK to remove |
Color: Blue Location: HDD Off: Normal On: HDD is OK to remove |
|
/SYS/DBP/HDD[0- x ]/NVME |
FRU |
NVMe drive FRU |
|
|
/SYS/DBP/HDD[0- x ]/NVME/PRSNT |
Discrete sensor |
NVMe device presence |
01h-ENTITY_ABSENT 02h-ENTITY_PRESENT |
|
/SYS/VREG_DBP_ERR |
Discrete sensor |
Disk backplane voltage regulator-down (VRD) error (Hidden) |
01h-DEASSERTED 02h-ASSERTED |
|
/SYS/VREG_USB_ERR |
Discrete sensor |
Universal Serial Bus (USB) VRD error (Hidden) |
01h-DEASSERTED 02h-ASSERTED |
Drive Components
The following table lists the hard disk drive (HDD) and solid state drive (SSD) components.
Table E-5 Drive Components
| Component Name (Oracle ILOM CLI Targets) | IPMI Type | Description | Values (if applicable) |
|---|---|---|---|
|
/SYS/DBP/HDD[0- x ] |
FRU |
Hard disk drive FRU |
From host |
|
/SYS/DBP/HDD[0- x ]/PRSNT |
Discrete sensor |
Hard disk drive presence |
01h-ENTITY_ABSENT 02h-ENTITY_PRESENT |
|
/SYS/DBP/HDD[0- x ]/STATE |
Discrete sensor |
Writable multistate, slot/connector sensor type, per IPMI |
01h-FAULT_STATUS 02h-IDENTITY 04h-INSTALLED 20h-SLOT_POWER_OFF |
|
/SYS/DBP/HDD[0- x ]/SERVICE |
Indicator |
Hard disk drive Fault-Service Required LED |
Color: Amber Location: HDD Off: Normal On: Hard disk drive was diagnosed as faulty. |
|
/SYS/DBP/HDD[0- x ]/OK2RM |
Indicator |
Hard disk drive OK to Remove LED |
Color: Blue Location: HDD Off: Normal On: Drive is ready to remove. |
|
/SYS/DBP/HDD[0- 3 ]/NVME |
FRU |
NVMe drive FRU |
|
|
/SYS/DBP/HDD[0- 3 ]/NVME/PRSNT |
Discrete sensor |
NVMe device presence |
01h-ENTITY_ABSENT 02h-ENTITY_PRESENT |
|
/SYS/MB/SSDR[0-1] |
FRU |
Internal M.2 SSD riser (2) FRU |
|
|
/SYS/MB/SSDR[0-1]/PRSNT |
Discrete sensor |
Solid-state drive (SSD) riser presence (2 risers) |
01h-ENTITY_ABSENT 02h-ENTITY_PRESENT |
|
/SYS/MB/SSDR[0-1]/SSD[0-1] |
FRU |
Internal SSD drive FRU |
|
|
/SYS/MB/SSDR[0-1]/SSD[0-1]/PRSNT |
Discrete sensor |
SSD drive presence (1 SSD per riser on 2U) (Hidden) |
01h-ENTITY_ABSENT 02h-ENTITY_PRESENT |
|
/SYS/MB/SSDR[0-1]/SSD[0-1]/STATE |
State sensor |
SSD drive state |
04h-INSTALLED 20h-SLOT POWER OFF |
|
/SYS/MB/SSDR[0-1]/SSD[0-1]/NVME |
FRU |
Internal SSD that is NVM Express FRU |
|
|
/SYS/MB/SSDR[0-1]/SSD[0-1]/NVME/PRSNT |
Discrete sensor |
Indicates the SSD is PCIe (NVMExpress) |
01h-ENTITY_ABSENT 02h-ENTITY_PRESENT |
Processor Components
The following table lists the processor (CPU) components.
Table E-6 Processor Components
| Component Name (Oracle ILOM CLI Targets) | IPMI Type | Description | Values (if applicable) |
|---|---|---|---|
|
/SYS/MB/P[0- x ] |
FRU |
Host CPU FRU |
|
|
/SYS/MB/P[0-1 ]/PRSNT |
Discrete sensor |
Host CPU is present. |
01h-ENTITY_PRESENT 02h-ENTITY_ABSENT |
|
/SYS/MB/P[0- x ]/SERVICE |
Indicator |
Host CPU Fault-Service Required LED |
Color: Amber Location: Motherboard Off: Normal On: Processor was diagnosed as faulty. |
Memory Device Components
The following table lists the memory device components.
Table E-7 Memory Device Components
| Component Name (Oracle ILOM CLI Targets) | IPMI Type | Description | Values (if applicable) |
|---|---|---|---|
|
/SYS/MB/P[0- x ]/D[0-11] |
FRU |
Host CPU DIMM FRU |
|
|
/SYS/MB/P[0-1 ]/D[0-11]/PRSNT |
Discrete sensor |
Host CPU DIMM is present. |
01h-ENTITY_ABSENT 02h-ENTITY_PRESENT |
|
/SYS/MB/P[0- x ]/D[0-11]/SERVICE |
Indicator |
Host CPU DIMM Fault-Service Required LED |
Color: Amber Location: Motherboard Off: Normal On: DIMM was diagnosed as faulty. |
|
/SYS/MB/P[0-1]/D[0-11]/TEMP |
Discrete sensor |
Host CPU DIMM temperature sensor (Hidden) |
System Motherboard Components
The following table lists the system motherboard components.
Table E-8 System Motherboard Components
| Component Name (Oracle ILOM CLI Targets) | IPMI Type | Description | Values (if applicable) |
|---|---|---|---|
|
/SYS/MB |
FRU |
General host system motherboard FRU |
|
|
/SYS/MB/NET[0 ] |
FRU |
Host Ethernet FRU |
|
|
/SYS/MB/PCIE[1-9] |
FRU |
PCIe slot |
|
|
/SYS/MB/PCIE[1-9]/PRSNT |
Discrete Sensor |
PCIe slot is occupied. |
01h-ENTITY_ABSENT 02h-ENTITY_PRESENT |
|
/SYS/MB/PCIE[1-9]/P_ENABLE_STATE |
Indicator |
PCIe slot power indicator |
01h-ENTITY_ABSENT 02h-ENTITY_PRESENT |
|
/SYS/MB/RISER[2-6] |
FRU |
PCIe Riser card FRU at Slot 2 and Slot 6 (Database Full Height card configuration) |
|
|
/SYS/MB/RISER[2-6]/PRSNT |
Discrete Sensor |
PCIe Riser Card at Slot 2 or Slot 6 is present |
01h-ENTITY_ABSENT 02h-ENTITY_PRESENT |
|
/SYS/MB/RISER2/PCIE[2, 4] |
FRU |
PCIE Slot on RISER2 Slot 2 - x16 CEM slot Slot 4 - x1 CEM slot for SMART NIC |
|
|
/SYS//SYS/MB/RISER2/PCIE[2, 4]/PRSNT |
Discrete Sensor |
Option card inserted into PCIe Slots on Riser 2 |
01h-ENTITY_ABSENT 02h-ENTITY_PRESENT |
|
/SYS//SYS/MB/RISER2/PCIE[2, 4]/P_ENABLE_STATE |
State Sensor |
PCIe slots on Riser 2 Power Enable State |
02h-SLOT POWER ENABLED 01h-SLOT POWER DISABLED |
|
/SYS//SYS/MB/RISER6/PCIE[6, 8]/PRSNT |
Discrete Sensor |
Option card inserted into PCIe Slots on Riser 6 |
01h-ENTITY_ABSENT 02h-ENTITY_PRESENT |
|
/SYS//SYS/MB/RISER6/PCIE[6, 8]/P_ENABLE_STATE |
State Sensor |
PCIe slots on Riser 6 Power Enable State |
02h-SLOT POWER ENABLED 01h-SLOT POWER DISABLED |
|
/SYS/MB/ROT |
FRU |
Root of Trust FRU Optional card is present in slot 1 (only supported slot) |
|
|
/SYS//SYS/MB/ROT/PRSNT |
Discrete Sensor |
Root of Trust is Present |
01h-ENTITY_ABSENT 02h-ENTITY_PRESENT |
|
/SYS/MB/T_IN_ZONE[0-3] |
Threshold sensor |
Cooling zone input temperature sensor |
Degrees Celsius |
|
/SYS/MB/T_OUT_ZONE[0-3] |
Threshold sensor |
Cooling zone output temperature sensor |
Degrees Celsius |
|
/SYS/SP |
FRU |
Service processor FRU |
|
|
/SYS/SP/OK |
Indicator |
SP OK LED Color: Green Location: Front panel On: SP is operating. Off: SP requires service. |
|
|
/SYS/SP/NET[0-1] |
FRU |
SP Ethernet FRU |
System Firmware Components
The following table lists the system firmware components.
Table E-9 System Firmware Components
| Component Name (Oracle ILOM CLI Targets) | IPMI Type | Description |
|---|---|---|
|
/SYS/MB/BIOS |
FRU |
BIOS FRU |
|
/SYS/MB/CPLD |
FRU |
Motherboard complex programmable logic device (CPLD)/field programmable gate array (FPGA) firmware version |