Owner's Guide Installation and Configuration Configuring a Recovery Appliance Rack Verifying the RoCE Network Fabric Configuration Verifying the RoCE Network Fabric Configuration This procedure describes how to verify the RoCE Network Fabric configuration. Verify the proper oracle-rdma-release software versions are being used on the database servers. [root@dbm01adm08 ~]# rpm -qa |grep oracle-rdma-release oracle-rdma-release-0.11.0-1.el7ora.x86_64 The oracle-rdma-release software and adapter firmware versions are automatically maintained on the Recovery Appliance storage servers. Check the adapter firmware versions on the database servers. Use the CheckHWnFWProfile script to check firmware versions for the RDMA Network Fabric adapters. # /opt/oracle.SupportTools/CheckHWnFWProfile -action list Visually check all the RDMA Network Fabric cable connections within the rack.The port lights should be on, and the LEDs should be on. Do not press each connector to verify connectivity. Complete the steps described in My Oracle Support Doc ID 2587717.1 Related Topics Verify RoCE Cabling on Oracle Exadata Database Machine X8M-2 and X8M-8 Servers (My Oracle Support Doc ID 2587717.1)