GraalVM Updater

GraalVM Updater, gu, is a command-line tool for installing and managing optional GraalVM language runtimes and utilities. It is available in the core GraalVM installation. To assist you with the installation, language runtimes and utilities are pre-packaged as JAR files and referenced in the documentation as “components”. GraalVM Updater can be also used to update your local GraalVM installation to a newer version or upgrade from a Community to Enterprise edition. Read more in Upgrade GraalVM.

Check Available Components

To check what components are already shipped with your GraalVM installation or what you have already installed, run the list command:

gu list

To check what components are available for your GraalVM version to install, run the gu available command:

gu available
Downloading: Component catalog from ...
ComponentId              Version            Component name                
-----------------------------------------------------------------------------
espresso                 <version>          Java on Truffle               
espresso-llvm            <version>          Java on Truffle LLVM Java library
js                       <version>          JavaScript
llvm                     <version>          LLVM
llvm-toolchain           <version>          LLVM.org toolchain            
native-image             <version>          Native Image                  
nodejs                   <version>          Graal.nodejs                  
python                   <version>          Graal.Python                  
R                        <version>          FastR                         
ruby                     <version>          TruffleRuby                   
wasm                     <version>          GraalWasm                     

Note down the ComponentId value for the component you would like to install.

GraalVM Updater verifies whether or not the version of a component is appropriate for your current GraalVM installation. A component may require other components as prerequisites for its operation. GraalVM Updater verifies such requirements and will either attempt to download the required dependencies, or abort the installation if the component’s requirements are not met. Components intended for Oracle GraalVM Enterprise Edition cannot be installed on GraalVM Community Edition.

Generic support for Node.js, R, Ruby, Python, and WebAssembly will work out of the box in most cases. It is recommended to fine-tune system-dependent configurations, following the recommendations in the component post-installation messages.

Install Components on GraalVM Community

You can install a component on GraalVM Community Edition by component’s ID using GraalVM Updater: gu install ComponentId. GraalVM Updater downloads a component from GitHub.

  1. Get a list of components available for your GraalVM version and their descriptive names:
     gu available
    
  2. Install a component package using the ComponentId value. For example, js:
     gu install js
    

    GraalVM Updater first downloads the list of components, then uses the information in the list to download the actual component package, and then installs it. To see more verbose output during the installation, as the download progress bar, print versions, and dependency information, use the -v (--verbose) switch.

If a component is installed that depends on another component, GraalVM Updater will search for the appropriate dependency and install it as well. If a required component cannot be found, the installation will fail.

Install Components on GraalVM Enterprise

You can install a component on GraalVM Enterprise Edition by component’s ID using GraalVM Updater: gu install ComponentId. GraalVM Updater downloads a component from Oracle’s storage point.

Installing a component to GraalVM Enterprise requires a user to provide a valid email address and accept a license for a given component. GraalVM Updater uses the download token (a personal access token, an alternative to using a password) which is bound to the user’s email and defines the set of accepted licenses. Follow these steps to install a component to GraalVM Enterprise, for example, Native Image:

  1. Run gu available to list the available components for GraalVM Enterprise Edition you have installed.

     gu available
    
  2. Install a component using the ComponentId value:

     gu install native-image
    

    You will see a message to provide your valid email address or input your download token and press ENTER. Supposedly, this is your first installation and you have not accepted the license yet. So press ENTER.

  3. Type your valid email address. You will immediately be sent an email to verify your email address and accept the license. If an email address is not provided, gu will abort the installation and print an error message that no download token was provided.

  4. Go to your email client and review the Oracle Technology Network License Agreement GraalVM Enterprise Edition Including License for Early Adopter Versions.

  5. Accept the license. This way you confirm the license acceptance and generate a download token simultaneously.

  6. Return to the console window and press ENTER to continue. It will ask you where to store the download token on your computer. By default, the download token will be saved in the ~/.gu/config file in the user’s home directory. To confirm the default location, type yes. The download and installation of the component will start.

Once the installation completes, you can continue installing other components using the same command: gu install ComponentId. GraalVM Updater reads your ~/.gu/config and you do not have to re-accept the license.

Consider the following aspects:

The following commands can help you manage a download token:

Provide a Download Token via Environment Variable

A download token can also be provided via an environment variable. This is useful for automation use cases, for example, in continuous integration (CI) and continuous delivery (CD) setups.

Note: The GitHub Action for GraalVM has instructions on how to set up CI/CD using the download token.

As a prerequisite, use the GraalVM Updater manually to set up GraalVM and any components you may need. As part of this, the GraalVM Updater will help you create a valid download token.

To show this download token, run:

gu --show-ee-token

To use this download token on another machine, copy the download token and set the $GRAAL_EE_DOWNLOAD_TOKEN environment variable:

export GRAAL_EE_DOWNLOAD_TOKEN=<valid-download-token>

GraalVM Updater then reads the download token from the variable. Note: $GRAAL_EE_DOWNLOAD_TOKEN takes precedence over the token stored in the ~/.gu/config file.

Install Components Manually

You can install a component from a local file, in other words, manually.

  1. Download a component in consideration of the operating system, the Java version, and architecture (if applicable) from:

  2. Having downloaded the appropriate JAR file, install it with this command:

     gu -L install component.jar
    

    The -L option, equivalent to --local-file or --file, installs a component from a downloaded JAR. However, a component may depend on other components (e.g., Ruby depends on the LLVM toolchain). For example, gu -L install component.jar will fail if the required components are not yet installed. If all dependencies are downloaded into the same directory, you can run:

     gu -L install -D
    

Install Components from Local Collection

Components can be downloaded manually in advance to a local file folder, or to a folder shared on the local network. GraalVM Updater can then use that folder instead of the catalog. Specify the directory to use for the components collection:

gu install -C /path/to/downloads/directory ComponentId

It is possible to type a component ID (like ruby) instead of a filename. GraalVM Updater will also attempt to find required dependencies in the local component collection.

When installing components from a given directory, you can install all components which have the correct version number using wildcards. For example, you can install the native-image component, or anything that starts with native like this:

gu install -C ~/Download/Components/ native*

Uninstall Components

Components may be uninstalled from GraalVM when no longer needed. To uninstall a specific component, use its ComponentId. Run gu list to find out the exact ComponentId.

The command to uninstall the component is:

gu remove ComponentId

If more components end with, for example, ruby, the installer will print an error message that a component’s full name is required (org.graalvm.ruby).

Note that the LLVM toolchain component may fail uninstallation if its dependent component(s) remains installed. In this case, remove the dependent component first, or add the -D option, which would remove dependent components in addition to those explicitly selected:

gu -D remove llvm-toolchain

Upgrade GraalVM

You can update the existing GraalVM installation to the most recent version with GraalVM Updater.

For example, having GraalVM 20.x installed, update to the most recent available version with:

gu upgrade

GraalVM Updater will attempt to download the latest version of either GraalVM Enterprise or GraalVM Community Edition, if available.

Consider the following aspects:

You can also upgrade the edition from Community to Enterprise. To upgrade GraalVM Community Edition to Enterprise, run:

gu upgrade --edition ee

It will install the newest version of GraalVM Enterprise Edition, next to the current installation. GraalVM Updater will check for the optional component presence, verify if a component is appropriate for the installation, and upgrade it as well.

Note: You can only upgrade GraalVM to a newer version with GraalVM Updater. The downgrades to an older version, and from GraalVM Enterprise to Community Edition are not possible.

Rebuild Images

Language runtime components for GraalVM may change. For example:

To rebuild and refresh the native binaries (language launchers), use the following command:

gu rebuild-images [--verbose] polyglot|libpolyglot|js|llvm|python|ruby|R... [custom native-image args]...

Replace Components and Files

A component may be only installed once. GraalVM Updater refuses to install a component if a component with the same ID is already installed. However, the installed component can be replaced. GraalVM Updater first uninstalls the component and then installs a new one.

To replace a component, use the -r option and the -L (--local-file or --file) option to treat parameters as the local filename of a packaged component:

gu install -L -r component.jar
gu install -r ruby

The process is the same as if gu remove is run first and gu install next.

GraalVM Updater also refuses to overwrite existing files if the to-be-installed and existing versions differ. There are cases when refreshing file contents may be needed, such as if they were modified or damaged. In this case, use the -o option:

gu install -L -o component.jar
gu install -o ruby

GraalVM Updater will then instruct the user to replace the contained files of a component. By default, it will not alter anything. Alternatively, use the -f (--force) option, which disables most of the checks and allows the user to install non-matching versions.

Configure Proxies

If GraalVM Updater needs to reach the component catalog, or download a component, it may need to pass through the HTTP/HTTPS proxy, if the network uses one. On macOS, the proxy settings are automatically obtained from the OS. On Linux, ensure that the http_proxy and https_proxy environment variables are set appropriately before launching the gu tool. Refer to the distribution and/or desktop environment documentation for the details.

GraalVM Updater intentionally does not support an option to disable certificate or hostname verification, for security reasons. A user may try to add a proxy’s certificate to the GraalVM default security trust store. A user can also download a component manually to a folder, and then use gu -L install /path/to/file or gu -C /path/to/download/dir install component to install from a local filesystem.

Working without Internet Access

If your machine cannot access and download the catalog and components from the Internet, the GraalVM Updater can install components from a local directory, or a directory on an accessible network share.

You need to prepare a directory, download all components that you want to install and their dependencies (in case they require other GraalVM components to work) into that directory.

Then you can use gu -L install /path/to/file (where the -L option instructs to use local files, equivalent to --local-file or --file). Adding the -D option will instruct GraalVM Updater to look for potential dependencies in the directory next to the installable file. Additionally, gu -C /path/to/download/dir install component can be used, with the specified directory contents acting as a catalog of components.

Note that with gu -L you need to specify the component’s file name, but when using gu -C <dir>, you need to specify a component ID (ComponentId):

# Specify file location
gu -LD install /tmp/installables/ruby.jar

# Specify component name
gu -C /tmp/instalables install ruby

Configure Installation

The installation command of GraalVM Updater accepts multiple options and parameters: shell gu install [-0CcDfiLMnosruvyxY] param [param ...]

The following options are currently supported:

GraalVM Updater Commands Overview

Command-line help is available by running gu or gu -h. Run gu <command> -h to get help specific for the particular command. For example, gu install -h.

GraalVM Updater usage options:

Additonal options:

Check the information about GraalVM components availability and support per platform.

On Windows, for example, installing the Native Image component requires Visual Studio Code and Microsoft Visual C++(MSVC). Step-by-step instructions on installing Visual Studio Build Tools and Windows 10 SDK, and starting using Native Image can be found here.