Set Host Power at Boot (Oracle ILOM)

1. Ensure that you have Admin (a) role privileges in Oracle ILOM.
2. To set a power-on policy in the Oracle ILOM web interface:
   1. Log in to the Oracle ILOM web interface.
   2. In the navigation pane, click System Management → Policy.
   3. In the Service Processor Policies table, select one of the following policies:

      • Auto power-on host on boot

      • Set host power to last power state on boot

      The power-on policies are mutually exclusive, that is, you can enable only one policy at a time. For more information about each policy, click the More Details link at the top of the page.

   4. In the Actions list, select Enable.
3. To set a power-on policy in the Oracle ILOM command-line interface (CLI):
   1. Log in to the Oracle ILOM CLI.
   2. Use one of the following commands:

      • set /SP/policy HOST_AUTO_POWER_ON=enabled

      • set /SP/policy HOST_LAST_POWER_STATE=enabled

      The power-on policies are mutually exclusive, that is, you can enable only one policy at a time.

   For details, refer to Power-On and Cooling-Down Policies Configurable from the Server SP, Oracle ILOM Administrator's Guide for Configuration and Maintenance, Firmware Release 5.0 at Systems Management Documentation.