2 General Description

This document defines the step-by-step actions performed to execute a software upgrade of an in-service EAGLE® STP from the source release to the target release.

The following figure shows the general steps for all processes of performing a software upgrade from hardware inventory to final upgrade health check.

Figure 2-1 Upgrade Process


Upgrade Process

The following table lists the steps required to successfully complete the upgrade process.

Table 2-1 Upgrade Tasks to be Completed

Upgrade Process Task Date completed Reference
Hardware Inventory    
Hardware Ordered    
New Hardware received    
System Health Check #1 performed.   [1]
System Health Check #1 output verified    
Target Release Baseline Hardware installed    
Target Software Release download (via Electronic Software Distribution or Upgrade Media).   [Appendix B.1.]
System Health Check #2 performed.   [1]
Enter Upgrade Software Access Key   [Appendix C]
Configure Network Conversion Method.   [Appendix B.2]
System Health Check #2 verified    
Software Upgrade Session 1 completed    
Health Check #3 performed.   [1]
Software Upgrade Session 2 completed    

During the software upgrade execution, phase flags are displayed in the output messages to indicate upgrade progress. The output messages shown in this document are for example purposes only and do not display upgrade phase values unless a specific request to verify the phase is given, i.e., Procedure 6, step 15. The goal in doing this is to make this document describe the generic upgrade procedure.

The following table lists the phase flags displayed during the upgrade process. These flags are used to indicate the progress made by the upgrade function. The internal upgrade processing, which is initiated by the activate-upgrade command, controls these flags.

Table 2-2 Phases of Upgrade Execution

Release Displayed Phase Indicator[1] Conversion Software Running Database Configuration
Source   Source Source
Source Phase 0 Database Target Source
Target Phase 2 Database Target Target
Target Phase 3 Network Target Target
Target   Target Target