4.49 chg-dconn
Use this parameter to change the DEIR connection information. The DCONN table supports the provisioning information related to the Diameter connections.
Parameters
- dcname (mandatory)
- Diameter connection name. This parameter specifies the unique logical name assigned to each diameter connection.
- maxtps (optional)
- Maxmium TPS. This is the maximum TPS for a diameter connection. The unused card capacity will be allocated among the connections that have exceeded their RSVDTPS up to limit of MAXTPS value provisioned for the particular connection.
- rsvdtps (optional)
- Reserved TPS. This is the guaranteed TPS (Transactions per second) for a diameter connection. Total RSVDTPS on a card cannot exceed 8000.
- td (optional)
- Diameter Peer Disconnect timer. This timer is used to control how long the DEIR process will wait for a DPA response (Diameter Peer Answer) to a send DPR (Diameter Peer Request). The value given to a timer is in seconds.
Example
chg-dconn:dcname=conn1:rsvdtps=1000:maxtps=5000:td=5:tw=15
chg-dconn:dcname=conn2:td=6:maxtps=6000
Dependencies
S13/S13' EIR feature must be enabled before changing any parameter of diameter connection.
DCONN table should be accessible.
At least one optional parameter must be specified.
Diameter connection name is not present in DCONN table.
Sum of RSVDTPS of all the diameter connections on a particular card must not exceed the diameter card TPS (8000).
RSVDTPS of a diameter connection must be less than or equal to its MAXTPS.
Notes
None.
Output
chg-dconn:dcname=conn1:rsvdtps=1000:maxtps=5000:td=5:tw=15
tekelecstp 13-03-20 15:44:10 EST EAGLE 45.1.0
chg-dconn:dcname=conn1:rsvdtps=1000:maxtps=5000:td=5:tw=15
Command entered at terminal #4.
CHG-DCONN: MASP A - COMPLTD
;