4.62 chg-gsm-msg
Use this command to provision GSM test messages. These messages are used by the MO SMS NPP Test Tool to test MO-based GSM SMS message processing by the NPP.
Parameters
- active (optional)
- This parameter specifies whether the GSM test message is sent to the network card for processing.
- cdpagti (optional)
- Called party address global title indicator. The SCCP CdPA GT for the GSM test message.
- cdpagtnai (optional)
- Called party address global title nature of address indicator. The SCCP CdPA GT NAI for the GSM test message.
- cdpndgts (optional)
- Called party number digits. The TCAP CdPN (SM-RP-UI TP-DA) digits for the GSM test message.
- cdpnnai (optional)
- Called party number nature of address indicator. The TCAP CdPN (SM-RP-UI TP-DA) NAI for the GSM test message.
- cdpnnp (optional)
- Called party numbering plan. The TCAP CdPN (SM-RP-UI TP-DA) NP for the GSM test message.
- cgpagti (optional)
-
Calling party address global title indicator. The SCCP CgPA GT for the GSM test message.
- cgpagtnai (optional)
- Calling party address global title nature of address indicator. The SCCP CgPA GT NAI for the GSM test message.
- cgpndgts (optional)
- Calling party number digits. The TCAP CgPN (SM-RP-OA MSISDN) for the GSM test message.
- cgpnnai (optional)
- Calling party number nature of address indicator. The TCAP CgPN (SM-RP-OA MSISDN) NAI for the GSM test message.
Example
chg-gsm-msg:msgn=1:cdpnnai=4:cdpadgts=12457896abcd:cgpnnai=2:cgpndgts=919818541560
chg-gsm-msg:msgn=1:reset=yes
Dependencies
The TSTMSG table is corrupt or cannot be found.
If the reset parameter is specified, then no other parameter can be specified.
At least one optional parameter must be specified.
Output
chg-gsm-msg:msgn=1:cdpnnai=4:cdpndgts=987654321:cgpnnai=4
tekelecstp 09-03-02 10:46:51 EST EAGLE 40.1.0
CHG-GSM-MSG: MASP A - COMPLTD
;
Related Topics