4.66 chg-gsmsmsopts

Use this command to enter GSM SMS system options in the database. This command updates the GSMSMSOPTS table.

Parameters

bpartygttsn (optional)
MO SMS B-Party Routing GTT Set name. The GTT set where Global Title Translation lookup on B-Party digits is performed.
Range:
ayyyyyyyy

1 alphabetic character followed by up to 8 alphanumeric characters.

Default:
No change to the current value
System Default:
none
defis41smsc (optional)
Default IS41 short message service center. The default SMSC where an SRI_SM message received for an own network IS41 subscriber is relayed.
Range:
1-15 digits, none
Default:
No change to the current value
System Default:
none
defrn (optional)
Default routing number. A default routing number used for own-network subscribers.
Range:
1-15 digits, none

Valid digits are 0-9, a-f, A-F

Default:
No change to the current value
System Default:
none
igmsmsrelay (optional)
IGM - based SMS relay. This parameter specifies whether IGM relays an SRI_SM message that is received for an own network IS41 subscriber to a default SMSC or sends an SRI_SM-NACK error message.
Range:
yes
IGM relays the message to the default SMSC
no
IGM sends an SRI_SM-NACK
Default:
No change to the current value
System Default:
no
is41smscgttsn (optional)
IS41 SMSC GTT Set name. The GTT set where Global Title Translation lookup on default IS41 SMSC digits is performed.
Range:
ayyyyyyyy

1 leading alphabetic and up to 8 following alphanumeric characters.

Default:
No change to the current value
mosmsaclen (optional)

The number of the digits that are taken from the MO SMS CgPA and used as the Area Code in the MO SMS CdPA.

Range:
0 - 8
Default:
No change to the current value
System Default:
0
mosmsdigmat (optional)
MO-based SMS Home SMSC match. The method used by the Portability Check for MO SMS or the MO-based GSM SMS NP feature to find a Home SMSC match.
Range:
exact
The system searches for an exact match of digits in the HomeSMSC Table.
bestfit
The system searches for a match on the leading digits of an incoming message with any provisioned entry in HomeSMSC table if an exact match is not found.
Default:
No change to the current value
System Default:
exact
mosmsfwd (optional)
MO-based SMS forward. This parameter specifies whether the value of the SCCP CDPA in the MO-based SMS message is modified to the GTA value that is specified by the mosmsgta parameter.
Range:
yes
The SCCP CDPA value is modified.
no
The SCCP CDPA value is not modified.

This parameter must be specified before the mosmsfwd=yes parameter can be specified.

Default:
No change to the current value
System Default:
no
mosmsgta (optional)
MO-based SMS GTA. The GTA value that is used to replace the SCCP CDPA value in the MO-based SMS message.
Range:
5-21 digits, none
Default:
No change to the current value
System Default:
none
mosmsgttdig (optional)

MO SMS B-Party Routing GTT digits. The digits used for Global Title Translation.

Range:
sccpcdpa
The SCCP CdPA is used for GTT
mapbparty
The MAP B-Party number is used for GTT
Default:
No change to the current value
System Default:
sccpcdpa
mosmsnai (optional)
MO-based SMS NAI. The number conditioning performed on the SMS message destination address before lookup in the number portability database is performed.
Range:
intl
Number is treated as INTL (1) for number conditioning
nai
The NAI from the SMS message is used to perform number conditioning
nat
Number is treated as NATL (2) for number conditioning
unknown
Number is treated as UNKNOWN (0) for number conditioning

A value of nai  must be specified before the intl, natl, nai1, nai2, nai3, and unkn parameters in the chg-npp-serv command can be changed to non-default values for the MOSMSGCDPN service.

Default:
No change to the current value
System Default:
intl
mosmssa (optional)
MO-based SMS sub-address. This parameter specifies whether the sub-address is searched in the SMS called party (destination address).
Range:
yes
Sub-address is searched in the SMS called party.
no
Sub-address is not searched in the SMS called party.
Default:
No change to the current value
System Default:
no
mosmstcapseg (optional)
MO-based SMS TCAP Segmentation for GSM. This parameter specifies whether Mobile-Originated segmented TCAP messages are supported.
Range:
on
Segmented messages are supported.
off
Segmented messages are not supported.
Default:
No change to the current value
System Default:
off
mosmstype (optional)
MO-based SMS type. The value of the entity type that indicates that a successful lookup occurred in the number portability database.
Range:
sp
signaling point
rn
routing number
sprn
Lookup is successful if the value of the entity type is sp or rn.
all
Lookup is successful if the value of the entity type is sp or rn, or if no entity type is found.
Default:
No change to the current value
System Default:
sprn
mtmmsackn (optional)
MT-Based MMS acknowledgement. The message that is generated in response to a successful number portability database lookup for an SRI_SM message from a Home MMSC.
Range:
ack
SRI_SM_ACK message
nack
SRI_SM_NACK (Return Error) message
Default:
No change to the current value
System Default:
ack
mtmmsentylen (optional)
MT-Based MMS Entity length. The maximum number of digits used from the entity value of a returned RN, SP, or SRFIMSI entity for Multimedia Service (MMS) processing.
Range:
1 - 15, none

none —all digits from the entity value are used

Default:
No change to the current value
System Default:
none
mtmmsgta (optional)
MT-Based MMS GTA. The GTA that is compared with the SCCP CgPA GTA of an SRI_SM message to determine whether the originator of the message is a Home MMSC.
Range:
5-21 digits, none

Valid digits are 0-9, a-f, A-F

none —Deletes the current value of the mtmmsgta parameter.

Default:
No change to the current value
System Default:
none
mtmmslen (optional)

MT-Based MMS Length. The maximum number of digits used in the returned IMSI and/or NNI fields for MMS processing.

Range:
1 - 24, none

none —all digits from the fields are used

Default:
No change to the current value
System Default:
none
mtmmstype (optional)
MT-Based MMS type. The value of the entity type that indicates that a successful lookup occurred in the number portability database.
Range:
sp
signaling point
rn
routing number
sprn
sporrn
all
sp, rn,or DN with no entity
nonsp
rnor DN with no entity
Default:
No change to the current value
System Default:
rn
mtsmsackn (optional)
MT-Based SMS acknowledgement. The message generated in response to a successful number portability database lookup for an SRI_SM message from a Home SMSC.
Range:
ack
SRI_SM_ACK message
nack
SRI_SM_NACK (Return Error) message
Default:
No change to the current value
System Default:
ack
mtsmschksrc (optional)
MT-Based SMS check source. This parameter specifies whether the SCCP CgPA GTA of a SRI_SM message is validated to determine if the source of the message is a Home SMSC.
Range:
yes
The SCCP CgPA GTA of an SRI_SM message is validated
no
The SCCP CgPA GTA of an SRI_SM message is not validated

If the mtsmschksrc=yes parameter is specified, and if the incoming SRI_SM message has SCCP CgPA GTA, then the SCCP CgPA GTA must be found in the Home SMSC list for the source of the message to be considered a Home SMSC. If the message is not found in the Home SMSC list, then the MT-Based GSM SMS NP feature does not process the message.

If the mtsmschksrc=no parameter is specified, or if SCCP CgPA GTA does not exist in the incoming message, then the source of the message is considered to be a Home SMSC, and the MT-Based GSM SMS NP feature considers the message for processing.

Default:
No change to the current value
System Default:
no
mtsmsdltr (optional)
MT-Based SMS delimiter. This parameter specifies whether to insert a delimiter digit string before or after the routing number (RN) if the RN is used in the outbound digit format.

Note:

The delimiter string that is inserted is determined by the mtsmsdltrv parameter.
Range:
no
A delimiter digit string is not inserted
prern
A delimiter digit string is inserted before the RN
postrn
A delimiter digit string is inserted after the RN
Default:
No change to the current value
System Default:
no
mtsmsdltrv (optional)
MT-Based SMS delimiter value. The delimiter digit string that is inserted before or after the RN when the RN is used in the outbound digit format.
Range:
1-5 digits, none

Valid digits are 0-9, a-f, A-F

Default:
No change to the current value
System Default:
none
mtsmsimsi (optional)
MT-Based SMS IMSI. The required format of digits that are encoded in the “IMSI” parameter of the SRI_SM response message.
Range:
rn
routing number
rndn
routing number and the international dialed or directory number
ccrndn
country code, routing number, and national directory or dialed number
dn
directory or dialed number
srfimsi
IMSI is encoded as the “SRFIMSI” parameter from the number portability database
mccrndn
mobile country code, routing number, and directory or dialed number
Default:
No change to the current value
System Default:
mccrndn
mtsmsnakerr (optional)
MT-Based SMS negative acknowledgement error. The TCAP error choice code used in the NACK response message generated for SRI_SM messages.
Range:
0 - 255
Default:
No change to the current value
System Default:
1
mtsmsnni (optional)
MT-Based SMS network node indicator. The required format of digits that are encoded in the “Network Node Number” parameter of the SRI_SM response message.
Range:
rn
routing number
rndn
routing number and the international dialed or directory number
ccrndn
country code, routing number, and national directory or dialed number
dn
Directory or Dialed Number
srfimsi
IMSI is encoded as the “SRFIMSI” parameter from the number portability database
mccrndn
mobile country code, routing number, and directory or dialed number
none
The Network Node Number parameter is not encoded in the response message
Default:
No change to the current value
System Default:
rn
mtsmstype (optional)
MT-Based SMS type. The value of the entity type that indicates that a successful lookup occurred in the number portability database for messages that are modified by the MT-Based GSM SMS NP feature.
Range:
sp
signaling point
rn
routing number
sprn
sporrn
all
sp,rn, or DN with no entity
nonsp
rnor DN with no entity
Default:
No change to the current value
System Default:
rn
spfill (optional)
This parameter specifies whether the Numbering Plan Processor (NPP) can populate SP and RN entities for own network subscribers at the same time.
Range:
off
Do not populate the RN and SP entities at the same time
on
Allow population of the RN and SP entities at the same time
Default:
No change to the current value
System Default:
off
sporttype (optional)
Service Portability type. This parameter specifies whether Service Portability is performed for the associated feature.

The S-Port feature must be enabled before this parameter can be specified. The S-Port feature must be turned on before any change to the parameter will impact the associated feature.

If Service Portability is performed, then the Service Portability prefix (RTDB ‘GRN’entity id) is applied.

Range:
gsm
apply Service Portability prefix for own-network GSM subscribers
is41
apply Service Portability prefix for own-network IS41 subscribers
all
apply Service Portability prefix for all own-network (IS41 and GSM) subscribers
none
Service Portability is not performed
Default:
No change to the current value
System Default:
none
srismdn (optional)
SRI_SM DN location. This parameter specifies whether the MT-Based GSM SMS NP feature selects the MSISDN from the TCAP or SCCP CdPA section of the SRI_SM message.
Range:
sccp
select the MSISDN from the SCCP CDPA section
tcap
select the MSISDN from the TCAP section
Default:
sccp

Example

chg-gsmsmsopts:mosmsnai=intl:mosmstype=sp:mosmssa=no

chg-gsmsmsopts:mosmsfwd=no:mosmsgta=987654321

chg-gsmsmsopts:srismdn=tcap

chg-gsmsmsopts:mtsmsackn=nack:mtsmsdltr=no:mtsmsdltrv=125:mtsmschksrc=no

chg-gsmsmsopts:mtmmsgta=51111:mtmmstype=sp:mtmmsackn=nack:mtmmsentylen=7:mtmmslen=10

chg-gsmsmsopts:mosmsdigmat=bestfit

chg-gsmsmsopts:bpartygttsn=setint001:mosmsgttdig=mapbparty

chg-gsmsmsopts:mosmsaclen=4

chg-gsmsmsopts:mosmstcapseg=on

Dependencies

At least one parameter must be specified.

The Hex Digit Support for GTT feature must be enabled before a hexadecimal value for the mosmsgta parameter can be specified.

The mosmsgta parameter must be specified before the mosmsfwd=yes parameter can be specified.

The mtsmsdltrv parameter must be provisioned before a value of prern or postrn can be specified for the mtsmsdltr parameter.

The value specified for the bpartygttsn or is41smscgttsn parameter must match the name of an existing GTT Set.

The mosmsgttdig=sccpcdpa parameter must be specified before the bpartygttsn=none parameter can be specified.

The GTT set specified for the bpartygttsn or is41smscgttsn parameter must have settype=cdgta (see the ent-gttset command).

If the bpartygttsn=none parameter is specified, then the mosmsgttdig=mapbparty parameter cannot be specified.

The GTT Set table is corrupt or cannot be found.

The EGLEOPTS table is corrupt or cannot be found.

The MO-based GSM SMS NP, MO SMS ASD, or MO SMS GRN feature must be enabled before the mosmsfwd or mosmsgta parameter can be specified.

The Portability Check for MO SMS feature or the MO-based GSM SMS NP feature must be turned on before the mosmsdigmat or mosmstcapseg parameter can be specified.

The MT-Based GSM SMS NP feature must be enabled before the mtsmsimsi, mtsmsnni, mtsmstype, mtsmsackn, mtsmsdltr, mtsmsdltrv, mtsmsnakerr, mtsmschksrc, or srismdn parameter can be specified.

The MT-Based GSM MMS NP feature must be enabled before the mtmmsgta, mtmmstype, mtmmsackn, mtmmsentylen, or mtmmslen parameter can be specified.

The MO SMS B-Party Routing feature must be enabled before the bpartygttsn or mosmsgttdig parameter can be specified.

The MO-based GSM SMS NP feature must be enabled before the mosmstype, defrn, or spfill parameter can be specified.

The MO SMS ASD, MO SMS GRN, MO-based GSM SMS NP, or Prepaid SMS Intercept Phase 1 feature must be enabled before the mosmsaclen, mosmsnai, or mosmssa parameter can be specified.

If a digit string value has already been specified for the mosmsgta or mtsmsdltrv parameter, then a value of none cannot be specified subsequently for that parameter.

The IS41 GSM Migration feature must be turned on before the igmsmsrelay, is41smscgttsn, or  defis41smsc parameter can be specified.

If the defis41smsc=none parameter is specified, then the igmsmsrelay=yes parameter cannot be specified.

If the defis41smsc parameter has a value other than none, then the is41smscgttsn=none parameter cannot be specified.

The S-Port feature must be enabled before the sporttype parameter can be specified.

The EGTT feature must be turned on before the is41smscgttsn parameter can be specified.

Notes

The mosmstcapseg parameter is turned off automatically if the Portability Check for MO SMS feature is turned off or the temporary FAK for the feature expires, and the MO-based GSM SMS NP feature is not enabled.

Output

chg-gsmsmsopts:is41smscgttsn=set1:defis41smsc=1234:igmsmsrelay=yes 

    tekelecstp 09-06-08 18:52:54 EST  EAGLE 41.1.0
    CHG-GSMSMSOPTS: MASP A - COMPLTD 
;

Related Topics