4.79 chg-inpopts

Use this command to provision INP-specific data. This command updates the INPOPTS table.

Parameters

Note:

The options in the on and off parameters are described in the Notes section.
cdpnnai (optional)
Called Party Number Nature of Address indicator.
Range:
0 - 127

The following parameter values are valid: 1 (Subscriber), 2 (Unknown), 3 (National), and  4 (International)

Default:
No change to the current value
cdpnpfx (optional)
Called Party Number Prefix.
Range:
1-15 digits

Valid digits are 0-9, A-F, a-f

Default:
No change to the current value
defrn (optional)
Default routing number. A default routing number that is used for own-network subscribers.
Range:
1-15 digits, none

Valid digits are 0-9, a-f, A-F

Default:
No change to the current value
System Default:
none
dltpfx (optional)
Delete prefix.
Range:
yes
no
Default:
no
dra (optional)
Destination routing address. This parameter specifies the routing address format supported in INP "Connect" response messages.
Range:
rndn
RN + [CDPNPFX] + DN
rn
Routing Number
ccrndn
[CDPNPFX] + CC + RN + DN
rnnecdn
RN+ [CDPNPFX]+ NEC+ DN
homerndn
Home Routing Number
rnasd
RN + ASD
asdrn
ASD + RN
rnasddn
Supports RN +ASD+ [CDPNPFX] + DN in the INP "CONNECT" response messages.
asdrndn
Supports ASD+ RN + [CDPNPFX] + DN in the INP "CONNECT" response messages.
ccrnasddn
Supports [CDPNPFX] +CC + RN + ASD+DN in the INP "CONNECT" response messages.
asdrnccdn
Supports ASD+ RN+  [CDPNPFX]+ CC+ DN in the INP "CONNECT" response messages.
ccasdrndn
Supports [CDPNPFX] +CC + ASD + RN+DN in the INP "CONNECT" response messages.
rnasdccdn
Supports  RN + ASD + [CDPNPFX] +CC + DN in the INP "CONNECT" response messages.
rnasdnecdn
RN + ASD + [CDPNPFX] + NEC + DN
asdrnnecdn
ASD + RN+ [CDPNPFX]+ NEC+ DN
rngrn
RN + GRN
grnrn
GRN + RN
rngrndn
RN + GRN + [CDPNPFX] + DN
grnrndn
GRN + RN + [CDPNPFX] + DN
ccrngrndn
[CDPNPFX] + CC + RN + GRN + DN
ccgrnrndn
[CDPNPFX] + CC + GRN + RN + DN
grnrnccdn
GRN + RN + [CDPNPFX] + CC + DN
rngrnccdn
RN + GRN + [CDPNPFX] + CC + DN
rngrnnecdn
RN + GRN + [CDPNPFX] + NEC + DN
grnrnnecdn
GRN + RN + [CDPNPFX] + NEC + DN
grn
GRN
grndn
GRN + [CDPNPFX] + DN
ccgrndn
[CDPNPFX] + CC + GRN + DN
Default:
No change to the current value
System Default:
rndn
dranai (optional)
Nature of Address indicator.
Range:
sub
unknown
natl
intl
ntwk
Default:
No change to the current value
dranaiv (optional)
Nature of Address indicator value.
Range:
0 - 127
dranp (optional)
Numbering plan.
Range:
e164
x121
f69
Default:
Current value
dranpv (optional)
Numbering plan value.
Range:
0 - 7
Default:
No change to the current value
ncdpnpfx (optional)
New Called Party Number Prefix.
Range:
1-15 digits, none

Valid digits are 0-9, a-f, A-F

nec (optional)
National Escape Code.
Range:
1-5 digits, none

Valid digits are 0-9, a-f, A-F

Default:
none
off (optional)
This parameter turns off the specified options. Up to 8 comma-separated unique options can be specified.
Range:
cutnpaste
on (optional)
This parameter turns on the specified options. Up to 8 comma-separated unique options can be specified.
Range:
cutnpaste
relcause (optional)
Release cause. The reason for releasing the call when an INP Circular Route is detected. 
Range:
1 - 127
Default:
31 -normal, unspecified
snai (optional)
Service Nature of Address indicator.
Range:
sub
natl
intl
none
unknown
Default:
No change to the current value
sporttype (optional)
Service Portability type. This parameter specifies whether Service Portability is performed for the associated feature.

Note:

The S-Port feature must be turned on before any change to the parameter will impact the associated feature.

Note:

If Service Portability is performed, then the Service Portability prefix (RTDB ‘GRN’entity id ) is applied.
Range:
gsm
Apply Service Portability prefix for own-network GSM subscribers
is41
Apply Service Portability prefix for own-network IS41 subscribers
all
Apply Service Portability prefix for all own-network (IS41 and GSM) subscribers
none
Service Portability is not performed for the feature.
Default:
No change to the current value
System Default:
none
sprestype (optional)
INP option that indicates the type of message the EAGLE is to send when an IDP message is received for INP service, the DN digits match, and the HLR ID is present. 
Range:
connect
send a CONNECT message
continue
send a CONTINUE message
Default:
continue

Example

chg-inpopts:dra=rn:dranp=e164:dranai=intl

chg-inpopts:dranp=f69:dranai=sub:dra=rndn

chg-inpopts:dra=rn:dranp=e164:dranai=intl:cdpnpfx=fac:dltpfx=yes

chg-inpopts:dranp=f69:dranai=sub:dra=rndn:cdpnpfx=200

chg-inpopts:dranp=f69:dranai=sub:dra=rndn:cdpnpfx=200:ncdpnpfx=3abcdef:dltpfx=yes

chg-inpopts:dranp=f69:dranai=sub:dra=rndn:cdpnpfx=3abcdef:ncdpnpfx=none

chg-inpopts:dranp=f69:dranai=sub:dra=rndn:cdpnpfx=fed123:dltpfx=no

chg-inpopts:dra=rn:dranp=e164:dranai=intl:cdpnpfx=fac:dltpfx=no:cdpnnai=1 :snai=none

chg-inpopts:sprestype=connect

chg-inpopts:dra=rnnecdn:nec=abcd1

chg-inpopts:dra=asdrnccdn:dranp=e164:dranai=intl:cdpnpfx=fac:dltpfx=yes

chg-inpopts:relcause=30

chg-inpopts:dra=grnrndn:dranp=e164:dranai=intl

chg-inpopts:dranp=e164:dranaiv=10:dra=rn

chg-inpopts:dranai=sub:dranpv=3

chg-inpopts:dranpv=4:dranaiv=20

chg-inpopts:cdpnpfx=2a3b4c5d6e7f

chg-inpopts:cdpnnai=1:snai=sub

chg-inpopts:on=cutnpaste

chg-inpopts:dra=ccgrndn:dranp=e164:dranai=intl

Dependencies

At least one optional parameter must be specified.

The dranp and dranpv parameters cannot be specified together in the command.

The dranai and dranaiv parameters cannot be specified together in the command.

If the ncdpnpfx or dltpfx parameter is specified, the cdpnpfx parameter must be specified.

A value of none cannot be specified for the cdpnpfx parameter.

If the ncdpnpfx=none parameter is specified, then the dltpfx parameter cannot be specified.

The value specified for the cdpnpfx parameter must already exist in the INPOPTS table.

The value specified for the ncdpnpfx parameter cannot already exist in the INPOPTS table.

A maximum of 5 Called Party Number Nature of Address values is allowed.

The cdpnnai and snai parameters must be specified together in the command.

If this command is entered to delete a CdPN Nature of Address value from the INPOPTS table, then the value specified for the cdpnnai parameter must already exist in the INPOPTS table.

A valid value must be specified for the nec parameter.

A maximum of 40 Called Party Number Prefix values can be provisioned.

If the nec=none parameter is specified, then values of  asdrnnecdn, rnasdnecdn, rnnecdn, rngrnnecdn, and grnrnnecdn cannot be specified for the  dra parameter.

The INP CRP feature must be enabled before the  relcause parameter can be specified.

The S-Port feature must be enabled before the sporttype parameter can be specified.

The INP feature must be enabled before this command can be entered.

The same option cannot be specified for the on and off parameters.

Notes

on/off options

  • cutnpaste —Specifies whether the CutAndPaste parameter is included in an INP CONNECT response message. The value for the CutAndPaste parameter is the length of the incoming DN in the IDP query. If the cutnpaste option is provisioned, then this value is cut from the CdPN. The remaining digits are pasted to the end of the DRA digits sent by the STP in the CONNECT response to form the new routing digits. This option has a default of OFF.

Output

chg-inpopts:dra=rngrn:nec=0

    tekelecstp 09-05-05 12:20:32 EST  EAGLE 41.1.0
    CHG-INPOPTS: MASP A - COMPLTD 
;

Related Topics