4.130 chg-seas-config

Use this command to configure information for the CCS Message Router (CCS MR) in the EAGLE database. The CCS MR is a stand-alone, self-contained system that provides a centralized mechanism for routing CCS network operations traffic between STPs/SCPs and existing and new OSS.

Parameters

authmode (optional)
Authentication mode. The authentication mode for the EAGLE.

Note:

Password-based authentication is the only authentication mode that is supported currently.
Range:
password
conn (optional)
Connection. The CCS MR where the SEAS terminal is connected.
Range:
ipmr1
ipmr2
hname (optional)
Host name. This parameter specifies the name of the remote host machine.
Range:
zzzzzzzzzzzzzzz

1-15 alphanumeric characters. Quotation marks ("") can be entered as part of the value. If quotation marks are used, then a hyphen ( ) can also be used.

ipaddr (optional)
IP address. The IP address of the CCS MR.
Range:
4 numbers separated by dots, with each number in the range of 0-255.
login (optional)
The login name used to create an SSH connection between the CCS MR and the EAGLE.
Range:
zzzzzzzzzzzzzzz

1-15 alphanumeric characters.

port (optional)
The port number of the CCS MR.
Range:
1024 - 5000
seasclli (optional)
The SEASCLLI portion of the EAGLE node name that is sent in SR-5129 messages.

Note:

This value is different from the EAGLE CLLI value that is configured with the chg-sid command.

The corresponding SEASCLLI name must be configured on the CCS MR. Refer to Telecordia Configuration Specification "Telcordia Technologies System Documentation", BD-SNAM-ADMIN-4 Issue 14, November 2006.

Range:
axxxxxxxxxx

1 alphabetic character followed by up to 10 alphanumeric characters

Example

chg-seas-config:seasclli=eaglestp001:conn=ipmr1: ipaddr=198.168.25.10:port=1500

chg-seas-config:conn=ipmr2:port=3000

chg-seas-config:conn=ipmr2:ipaddr=10.203.63.23

Dependencies

The SEAS Over IP feature must be enabled before this command can be entered.

The SEAS terminal must be inhibited before the seasclli, ipaddr, port, login, hname, or authmode parameters can be specified.

The conn parameter must be specified before the port, ipaddr, login, or hname parameters can be specified.

The SEASCFG Table must be accessible.

The value of the password requested by the login parameter must be from 1 - 15 alphanumeric characters in length.

The values of the login and hname parameters must be between 1-15 characters in length.

The port and ipaddr parameters must have unique values for each CCS MR.

Output

chg-seas-config:seasclli=eaglestp001:conn=ipmr1:ipaddr=198.168.25.10:port=1500

    tekelecstp 07-06-16 22:34:11 IST  EAGLE 37.5.0
    CHG-SEAS-CONFIG: MASP A - COMPLTD 
;

Related Topics