4.141 chg-snmpopts

Use this command to change the system-wide SNMP Options.

Parameters

on (optional)
This parameter turns on the specified options. Up to 8 comma-separated unique options can be specified.
Range:
snmpuim
off (optional)
This parameter turns off the specified options. Up to 8 comma-separated unique options can be specified.
Range:
snmpuim
getcomm (optional)
The value used as a password for incoming GET commands.
Range:
zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz

Any string up to 32 characters in length.

If the string contains characters other than alphanumeric characters, the entire string must be enclosed in double quotes (" ").

The string can be entered in upper and lower case; however, the system converts upper case alphabetic characters to lower case.

Default:
No change to the parameter value
System Default:
public
setcomm (optional)
The value used as a password for incoming SET commands.
Range:
zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz

Any string up to 32 characters in length.

If the string contains characters other than alphanumeric characters, the entire string must be enclosed in double quotes (" ").

The string can be entered in upper and lower case; however, the system converts upper case alphabetic characters to lower case.

Default:
No change to the parameter value
System Default:
private

Example

chg-snmpopts:on=snmpuim:getcomm="my.getcomm.str"

Dependencies

The SNMP feature must be activated before SNMP options can be configured.

3707 E3707 Cmd Rej: SNMP feature must be activated

None.

Notes

None.

Output

chg-snmpopts:on=snmpuim:getcomm=my.getcomm.str
tekelecstp 12-06-13 15:27:34 EST 45.0.0-64.66.0
chg-snmpopts:on=snmpuim:getcomm=my.getcomm.str
Command entered at terminal #4.
CHG-SNMPOPTS: MASP A - COMPLTD
;