4.154 chg-ttropts

Use this command to enter Triggerless TCAP Relay (TTR)-specific options in the database. This command updates the TTROPTS table.

Note:

Values other than none that are entered for the dlma, dlmb, or dlmc parameters for the IDP Relay services (IDPRCDPN(X), IDPRCGPN) using this command will overwrite values entered for those parameters using the chg-npp-serv command.

Parameters

Note:

The options for the on and off parameters are described in the Notes section.
cddnnotfndrsp (optional)
The system response for an IDP message processed by the IDPR/TTR service when the Called Party Number (CdPN) is not found in the RTDB.
Range:
relay
relay the message
connect
send a CONNECT message
continue
send a CONTINUE message
release
send a RELEASECALL message
Default:
release
cddra (optional)
The destination routing address (DRA) used in the CONNECT message generated by the INPRTG Service Action based on the CdPN RTDB lookup.
Range:
rndn
RN + DN
rn
RN
grn
GRN
rnasd
RN + ASD
asdrn
ASD + RN
rngrn
RN + GRN
grnrn
GRN + RN
ccrndn
CC + RN + DN
rnasddn
RN + ASD + DN
asdrndn
ASD + RN + DN
ccrnasddn
CC + RN + ASD + DN
ccasdrndn
CC + ASD + RN + DN
asdrnccdn
ASD + RN + CC + DN
rnasdccdn
RN + ASD + CC + DN
rngrndn
RN + GRN +  DN
grnrndn
GRN + RN + DN
ccrngrndn
CC + RN + GRN + DN
ccgrnrndn
CC + GRN + RN + DN
grnrnccdn
GRN + RN + CC + DN
rngrnccdn
RN + GRN + CC + DN
grndn
GRN + DN
ccgrndn
CC + GRN + DN
Default:
rndn
cddranai (optional)
The DRA nature of address indicator used in the CONNECT response generated by the INPRTG Service Action based on the CdPN RTDB lookup.
Range:
sub
unknown
natl
intl
ntwk
Default:
natl
cddranp (optional)
The DRA numbering plan used in the CONNECT response generated by the INPRTG Service Action based on the CdPN RTDB lookup.
Range:
e164
x121
f69
Default:
e164
cdnoentityrsp (optional)
The system response for an IDP message processed by the IDPR/TTR service when neither the RN nor SP entity is found in the CdPN RTDB.
Range:
relay
relay the message
connect
send a CONNECT message
continue
send a CONTINUE message
release
send a RELEASECALL message
Default:
continue
cdrelcause (optional)
The cause parameter value for the RELEASECALL message generated by the INPRTG Service Action based on the CdPN RTDB lookup.
Range:
1 - 127
Default:
31
(not defined)
cdrnrsp (optional)
The system response for an IDP message processed by the IDPR/TTR service when the CdPN is associated with an RN entity.
Range:
relay
relay the message
connect
send a CONNECT message
continue
send a CONTINUE message
release
send a RELEASECALL message
Default:
connect
cdsprsp (optional)
The system response for an IDP message processed by the IDPR/TTR service when the CdPN is associated with an SP entity.
Range:
relay
relay the message
connect
send a CONNECT message
continue
send a CONTINUE message
release
send a RELEASECALL message
Default:
relay
cgdnnotfndrsp (optional)
The system response for an IDP message processed by the IDPR/TTR service when the Calling Party Number (CgPN) is not found in the RTDB.
Range:
relay
relay the message
connect
send a CONNECT message
continue
send a CONTINUE message
release
send a RELEASECALL message
Default:
release
cgdra (optional)
The DRA used in the CONNECT response generated by the INPRTG Service Action based on the CGPN RTDB lookup.
Range:
rndn
RN + DN
rn
RN
grn
GRN
rnasd
RN + ASD
asdrn
ASD + RN
rngrn
RN + GRN
grnrn
GRN + RN
ccrndn
CC + RN + DN
rnasddn
RN + ASD + DN
asdrndn
ASD + RN + DN
ccrnasddn
CC + RN + ASD + DN
ccasdrndn
CC + ASD + RN + DN
asdrnccdn
ASD + RN + CC + DN
rnasdccdn
RN + ASD + CC + DN
rngrndn
RN + GRN +  DN
grnrndn
GRN + RN + DN
ccrngrndn
CC + RN + GRN + DN
ccgrnrndn
CC + GRN + RN + DN
grnrnccdn
GRN + RN + CC + DN
rngrnccdn
RN + GRN + CC + DN
grndn
GRN + DN
ccgrnrndn
CC + GRN + DN
Default:
rndn
cgdranai (optional)
The NAI option used in the CONNECT response generated by the INPRTG Service Action based on the CgPN lookup.
Range:
sub
unknown
natl
intl
ntwk
Default:
natl
cgdranp (optional)
The DRA NP used in the CONNECT response generated by the INPRTG Service Action based on the CgPN lookup.
Range:
e164
x121
f69
Default:
e164
cgnoentityrsp (optional)
The system response for an IDP message processed by the IDPR/TTR service when neither the RN nor SP entity is found in the CgPN RTDB.
Range:
relay
relay the message
connect
send a CONNECT message
continue
send a CONTINUE message
release
send a RELEASECALL message
Default:
continue
cgnptype (optional)
CgPN database lookup type. The entity type that is considered a success when used for RTDB lookup.
Range:
sp
Service Provider
rn
Routing Number
rnsp
rn or sp
anymatch
rn, sp, or no match with any entity
always
Lookup is always considered successful
rnspdn
rn, sp, or  dn

If the cgnptype=anymatch parameter is specified, then the value is also used as the RN for the outgoing CgPN.

Default:
rnsp
cgpaccck (optional)
CgPA country code check. This parameter specifies whether a DEFCC check is performed on the incoming CgPA.
Range:
always
The DEFCC check is always performed.
nonintl
The DEFCC check is performed if the CdPN NAI is not ‘International’.
off
The DEFCC check is not performed.
Default:
nonintl
cgpnskrtg (optional)
This parameter specifies whether SK routing occurs if IDP A-Party routing fails.
Range:
no
SK routing does not execute if IDP A-Party Routing fails.
yes
SK routing executes if IDP A-Party Routing fails.
Default:
No change to the current value
System Default:
no
cgrelcause (optional)
The cause parameter value in the RELEASECALL message generated by an INPRTG Service Action based on the CgPN RTDB lookup.
Range:
1 - 127
Default:
31 (not defined)
cgrnrsp (optional)
The system response for an IDP message processed by the IDPR/TTR service when the CgPN is associated with an RN entity.
Range:
relay
relay the message
connect
send a CONNECT message
continue
send a CONTINUE message
release
send a RELEASECALL message
Default:
connect
cgsnai (optional)
Calling party number nature of address indicator. The CgPN NAI that is used during number conditioning.
Range:
incoming
The incoming CgPN NAI is used.
intl
The CgPN NAI is set to ‘International’ (4).
natl
The CgPN NAI is set to ‘National’ (3).
unkn
The CgPN NAI is set to ‘Unknown’ (0).

A value of incoming must be specified before the intl, natl, nai1, nai2, nai3, and unkn parameters in the chg-npp-serv command can be changed to non-default values for the IDPRCGPN service.

Default:
incoming
cgsprsp (optional)
The system response sent for an IDP message processed by the IDPR/TTR service when the CgPN is associated with an SP entity.
Range:
relay
relay the message
connect
send a CONNECT message
continue
send a CONTINUE message
release
send a RELEASECALL message
Default:
relay
dfltrn (optional)
Default routing number. The default RN used when a value of sp or rnsp is specified for the nptype parameter, and the CdPN RTDB lookup returns entity type SP.
Range:
1-15 hexadecimal digits, none.

Valid digits are 0-9, a-f, A-F.

none —a default RN is not used

Default:
none
dlma (optional)
Delimiter A. The first delimiter used to format the outgoing TCAP dialed number.
Range:

1-16 hexadecimal digits, none.

Valid digits are 0-9, a-f, A-F.

Default:
none
dlmb (optional)
Delimiter B. The second delimiter used to format the outgoing TCAP dialed number.
Range:

1-16 hexadecimal digits, none.

Valid digits are 0-9, a-f, A-F.

dlmc (optional)
Delimiter C. The third delimiter used to format the outgoing TCAP DN.
Range:

1-16 hexadecimal digits, none.

Valid digits are 0-9, a-f, A-F.

drafrmt (optional)
DRA digit format. The format of the DRA digits.
Range:
grn
The format is GRN.
grndn
The format is GRN+DN.
dngrn
The format is DN+GRN.
ccgrndn
The format is CC+GRN+DN.
grnccdn
The format is GRN+CC+DN.
Default:
No change to the current value
System Default:
grn
dranai (optional)

DRA nature of address indicator. The DRA NAI that is used during number conditioning.

Range:
1 - 127
Default:
No change to the current value
System Default:
3 - NATL
map (optional)
Mapping direction. The mapping direction between the Type of Number (TON) and the Nature Of Address Indicator (NAI).
Range:
nai2ton
NAI mapping to TON
ton2nai
TON mapping to NAI
Default:
See the Notes section.
nai (optional)
Nature of Address Indicator. The NAI used in mapping.
Range:
0 - 127
Default:
See the Notes section.
nptype (optional)
 Entity type for CdPN RTDB lookup. The entity type that is considered a success when used for RTDB lookup.
Range:
sp
Service provider
rn
Routing number
rnsp
rn or sp
anymatch
rn, sp, or no match with any entity
always
Lookup is always considered successful
rnspdn
rn, sp, or dn

If the nptype=anymatch parameter is specified, then the value is also used as the RN for the outgoing CdPN.

Default:
rnsp
Use RN or SP as entity type for RTDB lookup
off (optional)
This parameter turns off the specified options. Up to 8 comma-separated unique options can be specified.
Range:
cdcnp
cgcnp
mergein
on (optional)
This parameter turns on the specified options. Up to 8 comma-separated unique options can be specified.
Range:
cdcnp
cgcnp
mergein
rnspfill (optional)

This parameter specifies whether the RN and SP entities are set to the value of the RN or SP digits from the RTDB when certain conditions are met.

Range:
off
If the nptype parameter has a value of rnsp, anymatch, or always, and the dfltrn=none parameter is specified, then the RN entity is NOT set to the value of the SP digits from the RTDB. If the nptype parameter has a value of rnsp, anymatch, or always, then the SP entity is NOT set to the value of the RN digits from the RTDB.
on
If the nptype parameter has a value of rnsp, any, or all, and the dfltrn parameter has a value of none, then the RN entity is set to the value of the SP digits from the RTDB. If the nptype parameter has a value of rnsp, anymatch, or always, and the spfill=on parameter is specified, then the SP entity is set to the value of the RN digits from the RTDB.
Default:
No change to the current value
System Default:
off
snai (optional)
CdPN nature of address indicator. The CdPN NAI used during number conditioning.
Range:
incoming
The incoming CdPN NAI is used.
intl
A CdPN NAI of 'International' (4) is used.
natl
A CdPN NAI of 'National' (3) is used.
unkn
A CdPN NAI of 'Unknown' (0) is used.

A value of incoming must be specified before the intl, natl, nai1, nai2, nai3, and unkn parameters in the chg-npp-serv command can be changed to non-default values for the IDPRCDPN(X) service.

Default:
incoming
spfill (optional)
This parameter specifies whether the SP entity type is populated if the value specified for the dfltrn or grn parameter is used for NPP processing.
Range:
off
do not populate the SP entity type
on
populate the SP entity type
Default:
No change to the current value
System Default:
off
sporttype (optional)
Service Portability type. This parameter specifies whether Service Portability is performed for the associated feature. 

The S-Port feature must be turned on before any change to the parameter will impact the associated feature. If Service Portability is performed, then the Service Portability prefix (RTDB ‘GRN’entity id) is applied.

Range:
gsm
apply Service Portability prefix for own-network GSM subscribers
is41
apply Service Portability prefix for own-network IS41 subscribers
all
apply Service Portability prefix for all own-network (IS41 and GSM) subscribers
none
Service Portability is not performed for the feature.
Default:
No change to the current value
System Default:
none
ton (optional)
Type of Number. The Type of Number used in mapping.
Range:
0 - 7
Default:
See the Notes section.

Example

chg-ttropts:nptype=always

chg-ttropts:snai=intl

chg-ttropts:cgnptype=sp

chg-ttropts:cgsnai=natl

chg-ttropts:dlma=1234567890

chg-ttropts:dlmb=1234567890123456

chg-ttropts:dlmc=1234567890abcdef

chg-ttropts:cgpaccck=always

chg-ttropts:dfltrn=123456789012345

chg-ttropts:cddra=rn:cdrelcause=10:cgdranp=e164:cdrnrsp=continue

chg-ttropts:cddra=grndn:on=cdcnp:off=cgcnp

chg-ttropts:nai=12:ton=7:map=nai2ton

Dependencies

At least one optional parameter must be specified.

The Prepaid IDP Query Relay feature must be enabled before this command can be entered.

The EGLEOPTS table is corrupt or cannot be found.

The IDP A-Party Routing feature and the IDP SK Routing feature must be enabled before the cgpnskrtg parameter can be specified.

If the new or existing value specified for the drafrmt parameter contains a country code (e.g., ccgrndn), then only a value of 4 can be specified for the dranai parameter. If the dranai parameter has a new or existing value that is not equal to 4, then the value that is specified for the drafrmt parameter cannot contain a country code.

The S-Port feature must be enabled before the sporttype parameter can be specified.

The same option cannot be specified for the on and off parameters.

The nai, ton, and map parameters must be specified together in the command.

Notes

Definitions for the on/off options

  • cdcnp —Specifies whether the CutAndPaste parameter is included in the CONNECT message generated by the INPRTG Service Action based on the CdPN RTDB lookup. The value for the CutAndPaste parameter is the length of the incoming DN in the IDP query if the DRA formatting option has a DN. If the option does not have a DN, the value is 0. The option has a default of OFF.
  • cgcnp —Specifies whether the CutAndPaste parameter is included in the CONNECT message generated by the INPRTG Service Action based on the CgPN RTDB lookup. The value for the CutAndPaste parameter is the length of the incoming DN in the IDP query if the DRA formatting option has a DN. If the option does not have a DN, the value is 0. The option has a default of OFF.
  • Mergein —When the mergein is ON, the selection of IDPRCDPN(X) NPP services is done from GT list of CSL table for all GTI values. If TTROPTS:MERGE_IN = OFF, IDPRCDPN(X) NPP services is fetched for NPP invocation from SKBCSM list of CSL table. mergein in chg-ttropts represents MERGE_IN in rtrv-ttropts. MERGE_IN by default is OFF.

IDPR TON Mapping Default Values

If the map, nai, and ton parameters are not specified, then the TON and NAI values are associated as follows:

Table 4-18 TON2NAI Mapping Default Values

TON NAI

1

4

INTL

2

3

NATL

0

2

UNKN

All other values

2

-

Table 4-19 NAI2TON Mapping Default Values

NAI TON

4

1

INTL

3

2

NATL

2

0

UNKN

All other values

0

-

Output

chg-ttropts:nptype=sp

    tekelecstp 08-05-05  13:34:22 EST  EAGLE 39.0.0
    CHG-TTROPTS: MASP A - COMPLTD 
;
chg-ttropts:cgdra=rn:cdrelcause=10:cgdranp=e164:cdrnrsp=continue

    tekelecstp 10-10-20 16:01:35 EST  EAGLE 43.0.0
    Command entered at terminal #4.
    CHG-TTROPTS: MASP A - COMPLTD 
;

Related Topics