4.159 chg-vflx-opts

Use this command to provision the data that is used to condition the DN in an incoming MSU. This command updates the VFLXOPTS table. The V-Flex feature must be enabled before this command can be entered.

Parameters

Note:

The nature of address indicator parameters (dranaiv or drnai) can be specified using a mnemonic or an explicit value. Either the mnemonic or the explicit value can be specified: however, both values cannot be specified at the same time for the same parameter. Table A-5 shows the mapping between the dranaiv and drnai parameter values.

Note:

The numbering plan parameters (dranpv or dranp) can be specified using a mnemonic or an explicit value. Either the mnemonic or the explicit value can be specified: however, both values cannot be specified at the same time for the same parameter. Table A-6 shows the mapping between the dranaiv and the drnai parameter values.
dra (optional)
Destination routing address. This parameter specifies the destination routing address in the "CONNECT" response.
Range:
rn
Routing number
rndn
RN + DN
ccrndn
CC + RN + DN
Default:
No change to current value.
System Default:
rn
dranai (optional)
Nature of address indicator. The nature of address indicator for the destination routing address.
Range:
sub
unknown
natl
intl
ntwk
Default:
Current value
dranaiv (optional)
The nature of address indicator value for the destination routing address.
Range:
0 - 127
dranp (optional)
The numbering plan for the destination routing address.
Range:
e164
x121
f69
Default:
No change to the current value
dranpv (optional)
This parameter specifies the numbering plan value for the destination routing address.
Range:
0 - 7
Default:
No change to the current value
nequeryonly (optional)
This parameter specifies whether the Call Decision table is searched after RTDB lookup.
Range:
off
The table is not searched.
on
The table is searched.
Default:
No change to the current value.
netype (optional)
This parameter specifies the network entity type that is used for RTDB lookup.
Range:
vmsid
voice mail server ID
sprn
signaling point routing number
grn
generic routing number
Default:
No change to the current value.
System Default:
vmsid

Example

This example specifies a new numbering plan and nature of address indicator:

chg-vflx-opts:dranai=sub:dranp=e164

This example searches the Call Decision and VMSID tables and uses the vmsid network entity before RTDB lookup:

chg-vflx-opts:nequeryonly=on:netype=vmsid

This example specifies a new destination routing address:

chg-vflx-opts:dra=rn

Dependencies

At least one optional parameter must be specified.

The dranp and dranpv parameters cannot be specified together in the command.

The dranai and dranaiv parameters cannot be specified together in the command.

The V-Flex Options table is corrupt or cannot be found by the system.

The V-Flex feature must be enabled before this command can be entered.

The nequeryonly=on parameter must be specified before the netype parameter can be specified.

Output

chg-vflx-opts:dra=rn:dranp=e164:dranai=intl

    tekelecstp 08-05-11 11:34:04 EST  EAGLE 39.0.0
    CHG-VFLX-OPTS: MASP A - COMPLTD 
;

Related Topics