4.236 dlt-mate-stp

Use this command to delete an PC (secondary point code) from the database. Also use this command to change an PC by first removing the PC from the database and then using the ent-mate-stp command to enter the new PC value.

Parameters

Note:

See Point Code Formats and Conversion for a detailed description of point code formats, rules for specification, and examples.
pc (mandatory)
ANSI point code with subfields network indicator-network cluster-network cluster member (ni-nc-ncm).
Synonym:
pca
Range:
000-255

The point code 000-000-000 is not a valid point code.

pc/pca/pci/pcn/pcn24/pcn16 (mandatory)
Secondary point code.
pci (mandatory)
ITU international point code with subfields zone-area-id. The prefix subfield indicates a spare point code (prefix-zone-area-id)
Range:
s-, 0-255

Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).

prefix-s
zone-0-7
area-000-255
id-0-7

The point code 000-000-000 is not a valid point code.

pcn (mandatory)
ITU international point code with subfields zone-area-id. The prefix subfield indicates a spare point code (prefix-zone-area-id)
Range:
s-, 0-16383, aa-zz

Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).

prefix-s
nnnnn-0-16383
gc-aa-zz
m1-m2-m3-m4-0-14 for each member; values must sum to 14
pcn24 (mandatory)
24-bit ITU national point code with subfields main signaling area-sub signaling area-signaling point (msa-ssa-sp).
Range:
000-255

Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).

msa-000-255
ssa-000-255
sp-000-255
pcn16 (mandatory)
16-bit ITU national point code with subfields main signaling area-sub signaling area-signaling point (msa-ssa-sp).
Range:
000---127

Specify a valid value for each subfield of the point code, and separate the subfields with a dash (-).

un---000---127
sna---000---15
mna---000---31

Example

dlt-mate-stp:pc=10-20-30

dlt-mate-stp:pcn24=98-98-98

dlt-mate-stp:pcn=s-12345

dlt-mate-stp:pcn16=121-10-30

Dependencies

A point code is not present in Mate STP table.

Output

dlt-mate-stp:pci=1-1-1
Command Accepted - Processing

    tekelecstp 18-05-29 11:09:12 MST  EAGLE 46.6.2.0.0-73.19.0
    dlt-mate-stp:pci=1-1-1
    Command entered at terminal #2.
;
    tekelecstp 18-05-29 11:09:13 MST  EAGLE 46.6.2.0.0-73.19.0
    DLT-MATE-STP: MASP B - COMPLTD
;

Related Topics