4.242 dlt-prefix

Use this command to delete a prefix based on the name of the feature, its prefix, and its prefix number.

Parameters

Note:

See "Point Code Formats and Conversion" for a detailed description of point code formats, rules for specification, and examples.
feature (mandatory)
Feature Name. This parameter specifies the name of an enabled controlled feature that is supported by this command. The parameter value must match the feature name as it is displayed in the rtrv-ctrl-feat command output.
Range:
azzzzzzzzzzzzzzzzzzzzzzzz

1 alphabetic character and up to 24 optional alphanumeric characters and spaces, enclosed in double quotation marks.

The parameter value is not case-sensitive; upper case or lower case or both can be entered.

Part or all of the feature name can be entered. If part of the feature name is specified, the entry must start with the first letter of the name, and must contain enough of the name to uniquely identify the feature. For example, there are two feature names that begin with “GSM MAP.” Enter enough additional characters to identify which GSM MAP feature is being entered (at least “GSM MAP SR” to identify the “GSM MAP SRI Redirect” feature). This command supports the following controlled features:

  • GSM MAP SRI Redirect
  • ISUP NP for EPAP
prefix (mandatory)
Prefix Value.
Range:

1-15 hexadecimal digits; valid digits are 0-9, a-f, A-F

Default:
Current value
prefixnum (mandatory)
Prefix Number. The prefix number identifies the prefix value to use for the specified feature name.
Range:
1 - 7

1-128 for GSM MAP SRI Redirect feature prefix values

1-5 for ISUP NP with EPAP feature prefix values

6 for the ISUP NP with EPAP feature Insertion Country Code

7 for the ISUP NP with EPAP feature Deletion Condition value

Default:
Current value

Example

Delete a prefix with prefix number 1 for the ISUP NP with EPAP feature.

dlt-prefix:feature="isup np with epap":prefix=1004:prefixnum=1

Delete a prefix with prefix number 2 and specify part of the GSM MAP SRI Redirect feature name.

dlt–prefix:feature="GSM MAP SRI":prefix=104:prefixnum=2

Dependencies

The specified feature name must be the name of an enabled controlled feature as it is displayed in the rtrv-ctrl-feat command output. The specified feature must be one of the following features that are supported by this command:

  • GSM MAP SRI Redirect
  • ISUP NP for EPAP

The specified feature prefix value must already exist in the database.

The specified feature prefix value must not be used by the specified feature in the database.

The FEATPFX table is corrupt or cannot be found by the system.

Notes

None

Output

dlt-prefix:feature="isup np with epap":prefix=1004:prefixnum=1 

    rlghncxa03w 04-09-20 09:04:14 EST  EAGLE 31.11.0
    DLT-PREFIX: MASP A - COMPLTD 
;

Related Topics