4.254 dlt-scr-isup

Use this command to delete an allowed ISUP screening reference from the Allowed ISUP entity set.

Parameters

isupmt/tupmt (mandatory)
ISUP or TUP message type.
Range:
0 - 255, *

*—the full range of values from 0–255

sr (mandatory)
Screening reference. This parameter specifies the point code’s unique screening reference name.
Range:
ayyy

1 alphabetic character followed by up to 3 alphanumeric characters

Example

dlt-scr-isup:sr=iec:isupmt=9

dlt-scr-isup:sr=iec:isupmt=1&&2

dlt-scr-isup:tupmt=1:sr=tu01

Dependencies

The specified sr must exist in the Allowed ISUP entity set.

The specified isupmt or tupmt parameter value must already exist in the specified sr.

The last entry in the specified sr cannot be deleted if the entry is referenced by another screen.

The GWSOA parameter combination should be known and valid.

The ISUPMT (ISUP Message Type) parameter must be specified for a SEAS command.

Notes

An asterisk can be specified for a parameter value in the chg/dlt-scr-isup commands only if that parameter value was specified as an asterisk in the ent-scr-isup command to define the parameter value.

A range of values can be specified for the isupmt or tupmt parameter, by separating the values that define the range by two ampersands (&&); for example, isupmt=025&&100 specifies all ISUP message types from 25 - 100. The value to the left of the && must be less than the value to the right of the && in the range.

Output

No screen sets are listed in the following example, because the specified screening reference is not associated with any screen sets.

dlt-scr-isup:sr=iec:isupmt=9 

    tekelecstp 02-09-02 11:59:41 EST  EAGLE 30.0.0
    DLT-SCR-ISUP: MASP A - COMPLTD 
;
No screen sets are listed in the following example, because the specified screening reference is not associated with any screen sets. dlt-scr-isup:sr=iec:isupmt=1&&2 

    tekelecstp 02-09-02 12:00:30 EST  EAGLE 30.0.0
    DLT-SCR-ISUP: MASP A - COMPLTD 
;
The following example lists the screen sets that are associated with the specified screening reference. dlt-scr-isup:tupmt=1:sr=tu01 

    tekelecstp 03-11-02 12:00:30 EST  EAGLE 31.3.0
    Extended Processing Time Required -- Please Wait
    Notice: The number of screensets affected is   2.
    DLT-SCR-ISUP: SCREEN SET AFFECTED - ist1    1% FULL
    DLT-SCR-ISUP: SCREEN SET AFFECTED - ist2    1% FULL
    DLT-SCR-ISUP: MASP A - COMPLTD 
;

Related Topics