4.362 ent-vendid

Use this command to enter elements into the Vendor ID list, for the GSM MAP SRI Redirect to Serving HLR (also called GSM MAP SRI Redirect) feature. Each entry is identified by the Vendor ID and the Vendor number.

The Vendor ID length (vendidlen parameter) must be entered first, before the command is entered the second time to enter the Vendor ID and Vendor Number.

Parameters

vendid (optional)

Vendor ID

Range:

1 - 15 digits

vendidlen (optional)

Vendor ID Length. All Vendor IDs defined for the GSM MAP SRI Redirect for Serving HLR feature must contain this number of digits.

Range:

1 - 15

vendnum (optional)

Vendor Number. The Vendor Number is used as a reference to the prefix for the GSM MAP SRI Redirect for Serving HLR feature.

Note:

The prefix values in the range are defined in the chg-prefix command.

Range:

1 - 128

1

Corresponds to the prefix defined with prefix number 1

2

Corresponds to the prefix defined with prefix number 2

..

..

128

Corresponds to the prefix defined with prefix number 128

vendtype (optional)

Vendor Type. The Vendor Type is used with the GSM MAP SRI Redirect for Serving HLR feature to allow multiple networks for the same equipment vendor.

Range:

1 - 32

Example

ent-vendidvend:len=6

ent-vendid:vendid=886933:vendnum=1:vendtype=1

ent-vendid:vendid=886939:vendnum=5:vendtype=9

Dependencies

The vendid=none parameter cannot be specified.

The GSM MAP SRI Redirect feature must be enabled before this command can be entered.

The VENDID table can contain a maximum of 500 entries.

The specified ID entry cannot already exist in the VENDID table.

The VENDID table is corrupt or cannot be found by the system.

All VENDID table entries must have the number of digits defined by the vendidlen parameter value.

The prefix with the same prefix number as the specified Vendor Number must already be provisioned for the GSM MAP SRI Redirect feature.

The Vendor ID length cannot be changed unless the VENDID table is empty. All Vendor IDs must be deleted from the table before a different Vendor ID length can be entered.

The Vendor ID length must be entered before any Vendor IDs can be defined.

The vendidlen parameter cannot be specified in the same command with the vendid, vendidlen, and vendtype parameters. Either the vendidlen parameter, or the vendid, vendidlen, and vendtype parameters can be specified in the command.

Notes

None.

Output

ent-vendid:vendidlen=6

    rlghncxa03w 04-10-07 11:11:28 EST  EAGLE 31.11.0
    ENT-VENDID: MASP A - COMPLTD 
;

ent-vendid:venid=886933:vendnum=1:vendtype=1

    rlghncxa03w 04-10-07 11:11:28 EST  EAGLE 31.11.0
    VENDID table is (6 of 200) 3% full
    ENT-VENDID: MASP A - COMPLTD 
;

ent-vendid:vendid=886939:vendnum=5:vendtype=9

    tekelecstp 14-05-30 14:12:00 EST  EAGLE 46.1.0
    VENDID table is (35 of 500) 7% full
    ENT-VENDID: MASP A - COMPLTD
;