4.393 rept-stat-applsock
Use this command to display the status of the IP application sockets.
Parameters
- lhost (optional)
- Local host name. The logical name assigned to the local host device.
- port (optional)
- The signaling link port associated with this socket.
- Range:
- a, b, a1..a63, b1..b63
Not all card types support all port parameter values.
See Table A-1 for valid port parameter range values for each type of card that can have signaling links.
- Default:
- Current value
- rhost (optional)
- Remote host name. The logical name assigned to the remote host device.
Example
rept-stat-applsock
rept-stat-applsock:port=b
Dependencies
The name parameter value, if specified, must exist in the Socket table.
A valid value must be specified for the host parameter. If the host name contains a hyphen, then the host name must be enclosed within quotation marks.
Notes
This command displays the primary states (PST) and the secondary state (SST). Primary states are:
- IS-NR—In-service normal
- IS-ANR—In-service abnormal (congested)
- OOS-MT—Out of service
- OOS-MT-DSBLD—Out-of-service maintenance-disabled (provisioned to be out of service by closing, prohibiting, or deactivation)
Secondary states are:
- ALMINH—Alarm inhibited
- OOS—Out-of-service
- NEA—Near-end allowed
- FEA—Far-end allowed
- NEP—Near-end prohibited
- FEP—Far-end prohibited
Output
rept-stat-applsock
rlghncxa03w 04-02-17 15:35:05 EST EAGLE 31.3.0
SOCKET PST SST
socred OOS-MT ALMINH
socyellow IS-ANR ----
socblue OOS-MT-DSBLD ----
Command Completed
;
rept-stat-applsock
rlghncxa03w 04-02-17 15:35:05 EST EAGLE 31.3.0
SOCKET PST SST
ipg11051 IS-NR NEA-FEA
ipg11071 IS-NR NEA-FEA
ipl1201 IS-NR NEA-FEA
Command Completed.
;
rept-stat-applsock:link=b
rlghncxa03w 04-02-17 15:35:05 EST EAGLE 34.0.0
SOCKET PST SST
ipl1201b IS-NR NEA-FEA
Command Completed.
;