rept-stat-lfs

Use this command to generate a report of all the SS7 links that are under LFS test. Along with the link identification information, the command output lists the current LBP, the test pattern, the maximum bit-errors threshold, the bit-errors since the beginning of this test, the maximum test time, and the time elapsed since the beginning of the test.

Parameters

link (optional)

The signaling link port on the card specified in the loc parameter.

Synonym:

port

Range:

a, b, a1 - a31, b1 - b31

Not all card types support all link parameter values.

See Table A-1 for valid link parameter range values for each type of card that can have assigned signaling link ports.

loc (optional)

This parameter is mandatory when the link parameter is specified.

Range:: 1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1212, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118

Example

rept-stat-lfs

rept-stat-lfs:loc=1201

rept-stat-lfs:loc=1201:link=a1

Dependencies

The LFS feature must be turned on before this command can be entered.

The card location specified in the loc parameter must be equipped.

The signaling link that is specified in the link parameter must be assigned to the card in the loc parameter location.

Card locations 1113, 1114, 1115, 1116, 1117, 1118, and all xy09 and xy10 locations (x is the frame and y is the shelf) cannot be specified in the loc parameter.

The card location (loc parameter) must be an E5-E1T1-B card, provisioned with the LIMT1 card type, configured with either the SS7ANSI or CCS7ITU application.

If the link parameter is specified, the loc parameter must be specified.

This command cannot be entered during upgrade.

Notes

This command can be canceled using the F9 function key or the canc-cmd command. See canc-cmd for more information.

Output

If no parameters are specified, all links that are in LFS test are displayed.

rept-stat-lfs


    rlghncxa03w 04-02-27 16:50:24 EST  EAGLE 31.3.0
    SLK      LBP  PATTERN    MAX-ERRORS  BIT_ERRORS  MAX-TIME TEST-TIME  
    1201,A     5  B0247              56          30  01:00:00 00:00:50
    1202,A     3  B511               56          27  01:00:00 00:01:05
    1203,A     1  OCTET              56          12  01:00:00 00:02:07
    1204,A     6  ALTERNATE          56          28  01:00:00 00:04:08   
    1205,A     2  B0247              56          36  01:00:00 00:03:05   
    1206,A     1  B0247              56          15  01:00:00 00:06:06   
    1207,A     3  B0247              56          19  01:00:00 00:02:04   
    1208,A     5  B0247              56          23  01:00:00 00:04:01   
;

If only the loc parameter is specified, all links in LFS test on the specified card are displayed.

rept-stat-lfs:loc=1208


   rlghncxa03w 04-02-27 16:50:24 EST  EAGLE 31.3.0
    SLK      LBP  PATTERN    MAX-ERRORS  BIT_ERRORS  MAX-TIME TEST-TIME  
    1208,A     5  B0247              56          23  01:00:00 00:04:01   
    1208,B1    4  B0247              56          23  01:00:00 00:08:01   
;

If the loc and link parameters are specified, only the specified link on the specified card is displayed.

rept-stat-lfs:loc=1208:link=a


   rlghncxa03w 04-02-27 16:50:24 EST  EAGLE 31.3.0
    SLK      LBP  PATTERN    MAX-ERRORS  BIT_ERRORS  MAX-TIME TEST-TIME  
    1208,A     5  B0247              56          23  01:00:00 00:04:01   
;

Legend

SLK—Signaling link identifier; same as loc and link parameters of act-lbp command
LBP—The loopback point of this test; same as lbp parameter of act-lbp command
PATTERN—Test pattern; same as pattern parameter of act-lbp command
MAX-ERRORS—Bit-error threshold allowed for this LFS test; same as maxerr parameter of act-lbp command
BIT_ERRORS—Number of bit-errors since the beginning of this test
MAX-TIME—Time window for testing each loop-back point; same as time parameter of act-lbp command
TEST-TIME—Amount of time the test has run

4.414 rept-stat-lfs