4.431 rept-stat-sflog

Use this command to display the overall status of the SS7 Firewall Logging subsystem on the EAGLE.

Parameters

loc (optional)
SFLOG card location for which card status, card TPS usage, and last log file event data is to be reported.
Range:
1101 - 1108, 1111 - 1112, 1201 - 1208, 1211 - 1218, 1301 - 1308, 1311 - 1318, 2101 - 2108, 2111 - 2118, 2201 - 2208, 2211 - 2218, 2301 - 2308, 2311 - 2318, 3101 - 3108, 3111 - 3118, 3201 - 3208, 3211 - 3218, 3301 - 3308, 3311 - 3318, 4101 - 4108, 4111 - 4118, 4201 - 4208, 4211 - 4218, 4301 - 4308, 4311 - 4318, 5101 - 5108, 5111 - 5118, 5201 - 5208, 5211 - 5218, 5301 - 5308, 5311 - 5318, 6101 - 6108, 6111 - 6118
peakreset (optional)
Reset peak values to the current TPS values and last log event file for primary and secondary SFLOG card.
Range:
yes

Example

rept-stat-sflog

rept-stat-sflog:loc=1101

rept-stat-sflog:peakreset=yes

Dependencies

At least one SCCP/SFAPP and one SFLOG card running the SCCPHC/SFAPP and IPSHC application must be configured before this command can be entered.

The peakreset and loc parameters cannot be specified together.

The location specified with this command should be the location of an SCCP or SFLOG (logging enabled) card running the SCCPHC or IPSHC GPL respectively.

The shelf and card must be equipped.

Notes

The peakreset parameter will reset the statistics on the primary and secondary card.

Output

This example displays output when no parameter is specified:

rept-stat-sflog 
Command Accepted - Processing
    tekelecstp 16-02-17 10:57:44 MST  EAGLE5 46.3.0.0.0-68.11.1

    SFLOG ALARM STATUS = No Alarms
    SFLOG Cards Configured= 2          Cards IS-NR= 2

    CARD     VERSION    PST            SST        AST       TPS     CPU USAGE
    --------------------------------------------------------------------------
    1201 P 021-011-007 IS-NR           Active    -----      2         2
    1101   021-011-007 IS-NR           Active    -----      0         2
    --------------------------------------------------------------------------

    TOTAL STATISTICS:
    ==========================================================================
    SERVICE          SUCCESS     DISCARD
    IPSM STATS     : 60           0
    SCCP STATS     : 60           0
    --------------------------------------------------------------------------

    HIGHEST 01 OVERALL DAILY PEAKS
    ====================================
    TPS     DATE      TIME
    ------------------------------------
    2       16-02-17  00:00:12

    Command Completed.
;

This example displays output when the loc parameter specifies an IPS card:

rept-stat-sflog:loc=<IPS card> 
Command Accepted - Processing
    tekelecstp 15-04-22 12:28:49 MST  EAGLE5 46.3.0-66.1.0.0
    CARD   VERSION      TYPE    PST            SST          AST
    1101   013-011-001  IPS     IS-NR          Active       -----
    CARD ALARM STATUS       = No Alarms.
    CPU USAGE =  1 %

    TPS STATISTICS:
    ==========================================================================
                    TPS    PEAK-TPS   PEAKTIMESTAMP
    --------------------------------------------------------------------------
                    101    101        02-01-02 01:16:32

    LAST LOG EVENT FILE GENERATED:
    ==========================================================================
    FILENAME                      SIZE           SERVER                                    
    --------------------------------------------------------------------------
    clli_fw_150423_123456         200          10.248.12.13

    
    Command Completed.
;

This example displays output when the loc parameter specifies an SCCP card:

rept-stat-sflog:loc=<SCCP card> 
Command Accepted - Processing
    tekelecstp 15-04-22 12:28:49 MST  EAGLE5 46.3.0-66.1.0
    CARD   VERSION      TYPE    PST            SST          AST
    1101   013-011-001  DSM     IS-NR          Active       -----
    CARD ALARM STATUS       = No Alarms.
    CPU USAGE =  1 %

    SCCP STATISTICS
    ====================
    SUCCESS    DISCARD           
    1000       0
    
    Command Completed.
;

Legend

This section defines the fields of the three rept-stat-sflog reports:

  • rept-stat-sflog with no parameters
  • rept-stat-sflog:loc=<IPS card location>
  • rept-stat-sflog:loc=<SCCP card location>

A dash (-) in an output field indicates that the statistic does not apply.

Report Type: rept-stat-sflog with no parameters
  • SFLOG ALARM STATUS—Displays SFLOG system-related alarms. If there are no system alarms present, this field displays No Alarms.
  • SFLOG Cards Configured—Number of cards running the IPSHC GPL that are configured for SS7 Firewall Logging.
  • CARDS IS-NR—Number of SFLOG cards running the IPSHC GPL that can be used by the system (status is In-Service Normal, IS-NR).
  • CARD—Card location of the SFLOG/SCCP/SFAPP card running the IPSHC/SCCPHC/SFAPP GPL respectively.
  • P—P indicates the primary Service Module card. The primary Service Module card provides the MPS status to the EAGLE. This indicator is displayed between the card location and the GPL version.
  • VERSION—Version number of the IPSHC/SCCPHC/SFAPP GPL running on the SFLOG/SCCP/SFAPP card.
  • PST—Primary state of the card. See  Possible Values for PST/SST/AST.
  • SST—Secondary state of the card. See Possible Values for PST/SST/AST.
  • AST—Associated state of the card. See Possible Values for PST/SST/AST.
  • TPS—Transactions Per Second; indicates the number of logging events which are received on the SFLOG card.
  • CPU USAGE—Percentage of the amount of CPU used to process messages by each card.
  • TOTAL STATISTICS—System-wide view of per-service statistics. The report tracks the following information:
    • SERVICE—SFLOG (IPSM STATS), SCCP STATS and SFAPP STATS statistics are displayed.
    • SUCCESS—Total number of messages successfully processed by the SCCP, SFAPP and SFLOG cards.
    • DISCARD—Total number of messages discarded by the SCCP and SFLOG cards.
Report Type: rept-stat-sflog:loc=<IPS card location>
  • CARD—Card location of the SFLOG card running the IPSHC GPL.
  • VERSION—Version number of the IPSHC GPL running on the SFLOG card.
  • TYPE—Type of the card.
  • PST—Primary state of the card. See  Possible Values for PST/SST/AST.
  • SST—Secondary state of the card. See Possible Values for PST/SST/AST.
  • AST—Associated state of the card. See Possible Values for PST/SST/AST.
  • CARD ALARM STATUS—Displays SFLOG card-specific alarms. If there are no card alarms present, this field displays No Alarms.
  • CPU USAGE—Percentage of the amount of CPU used to process messages by the card.
  • TPS STATISTICS—System-wide view of per-service statistics. The report tracks the following information:
    • TPS—Transactions Per Second; indicates the number of transactions that are received on the card.
    • PEAK-TPS—Indicates the maximum TPS that occurred on the card
    • PEAKTIMESTAMP—Indicates the time when the peak TPS occurred on the card.
  • LAST LOG EVENT FILE GENERATED—Statistics of the last log file transfer to the SFTP server. The report tracks the following information:
    • FILENAME—Name of the file.
    • SIZE—Size of the file.
    • SERVER—IP address of the server to which the file is transferred.
Report Type: rept-stat-sflog:loc=<SCCP card location>
  • CARD—Card location of the SCCP card running the SCCPHC GPL.
  • VERSION—Version number of the SCCPHC GPL running on the SCCP card.
  • TYPE—Type of the card.
  • PST—Primary state of the card. See  Possible Values for PST/SST/AST.
  • SST—Secondary state of the card. See Possible Values for PST/SST/AST.
  • AST—Associated state of the card. See Possible Values for PST/SST/AST.
  • CARD ALARM STATUS—Displays SCCP card-specific alarms. If there are no card alarms present, this field displays No Alarms.
  • CPU USAGE—Percentage of the amount of CPU used to process messages by the card.
  • SCCP STATISTICS—Per-card logging statistics on SCCP. The report tracks the following information:
    • SUCCESS—Total number of messages successfully processed by the SCCP card.
    • DISCARD—Total number of messages discarded by the SCCP card.
    • SERVER—IP address of the server to which the file is transferred.
Report Type: rept-stat-sflog:loc=<SFAPP card location>
  • CARD—Card location of the SFAPP card running the SFAPP GPL.
  • VERSION—Version number of the SFAPP GPL running on the SFAPP card.
  • TYPE—Type of the card.
  • PST—Primary state of the card. See  Possible Values for PST/SST/AST.
  • SST—Secondary state of the card. See Possible Values for PST/SST/AST.
  • AST—Associated state of the card. See Possible Values for PST/SST/AST.
  • CARD ALARM STATUS—Displays SFAPP card-specific alarms. If there are no card alarms present, this field displays No Alarms.
  • CPU USAGE—Percentage of the amount of CPU used to process messages by the card.
  • SFAPP STATISTICS—Per-card logging statistics on SFAPP. The report tracks the following information:
    • SUCCESS—Total number of messages successfully processed by the SFAPP card.
    • DISCARD—Total number of messages discarded by the SFAPP card.
None.