rtrv-enum-acl

Use this command to retrieve an entry from the ENUM Access Control List (ACL) Table. The ENUM ACL Table supports the provisioning information related to the allowed IP addresses for the ENUM application.

Parameters

ipaddr (optional)

This is a TCP/IP address expressed in standard dot notation. It specifies allowed IP addresses for the ENUM application.

Range:

Four numbers separated by dots, with each number in the range of 0-255, *.

Note:

It also supports wildcard characters as follows:

xxx.xxx.xxx.*
xxx.xxx.*.*
xxx.*.*.*

where xxx can be any number in range of 0-255.

System Default:

0.0.0.0

Example

rtrv-enum-acl

rtrv-enum-acl:ipaddr=10.248.13.9

rtrv-enum-acl:ipaddr=10.248.13.*

rtrv-enum-acl:ipaddr=10.248.*.*

rtrv-enum-acl:ipaddr=10.*.*.*

Dependencies

The ENUM ACL Table should be accessible.

The IP address specified by the IPADDR parameter should be provisioned in the ENUM ACL Table.

The IP address specified by the IPADDR parameter must be a valid IP address.

Notes

Wildcard IP addresses are allowed to support the ranges of IP addresses.

Output

This example displays output when the IPADDR parameter is not specified:

rtrv-enum-acl

tekelecstp 14-05-28 15:04:28 EST EAGLE 46.1.0
    rtrv-enum-acl
    Command entered at terminal #4.
    RTRV-ENUM-ACL: MASP A - COMPLTD
;
   IP Address
   -----------
   10.248.13.4
   10.245.13.*
   12.*.*.*

rtrv-enum-acl:ipaddr=10.248.13.9

tekelecstp 14-05-28 15:04:28 EST EAGLE 46.1.0
    rtrv-enum-acl:ipaddr=10.248.13.9
    Command entered at terminal #4.
    RTRV-ENUM-ACL: MASP A - COMPLTD
;
   IP Address
   ---------------
   10.248.13.9

4.477 rtrv-enum-acl