chg-attr-seculog

Use this command to modify attributes that affect the operation of the security logging feature.

Parameters

upldalm (optional)

Enable or disable log alarms that pertain to uploading of the security log.

Range:

yes

Enables log alarms pertaining to uploading of the log, as follows:

Upload required
Log overflowed
Standby log contains greater than 0 un-uploaded entries

no

Prevents log alarms from being raised. If the alarm is already raised when no is specified, the alarm is lowered.

Default:

No change to the current value

upslg (optional)

Percent full threshold. The percent full threshold for the security logs. If the upldalm=yes parameter is specified, an alarm is raised for the security log when the %full field (see the rept-stat-seculog command) in the log, on the active OAM, reaches or exceeds the value specified for upslg. This alarm indicates that the administrator must upload the log.

Range:: 1 - 99
Default:: No change to the current value

purgeperiod (optional)

Purge period (in Days). Number of days beyond which security logs will be deleted. If purgeperiod is greater than 0, then all the security logs which are older than purgeperiod will be deleted from OAM (see rtrv-seculog and rept-stat-seculog). Log entries will be deleted in background at the rate of one every few seconds until all stale entries have been removed.

Range:: 0 – 180
Default:: 0

tfrperiod (optional)

Transfer period. The frequency in which EAGLE security logs will be transferred to the configured remote server.

Range:

Never

No Security log transfer

Daily

Security logs are transferred every 24 hours.

Weekly

Security logs are transferred every 7 days.

Monthly

Security logs are transferred every 30 days.

Default:

Never

Example

chg-attr-seculog:upslg=80:upldalm=yes

Dependencies

At least one optional parameter must be specified.

The Security Log Attributes table is corrupt or cannot be found by the system.

Cannot update TFRPERIOD when seculog report transfer is in progress.

3709 E3709 Cmd Rej: Seculog file transfer in progress

Notes

None

Output


                chg-attr-seculog:upslg=80:upldalm=yes


    rlghncxa03w 04-01-05 16:40:40 EST  EAGLE 31.3.0
    CHG-ATTR-SECULOG:  MASP B - COMPLTD 
;

chg-attr-seculog:purgeperiod=2


        Command Accepted - Processing

            stpc1081301 20-05-13 17:24:56 EST  EAGLE 46.9.0.0.0-76.9.0    
            chg-attr-seculog:purgeperiod=2    
            Command entered at terminal #1.
    ;     
            stpc1081301 20-05-13 17:24:56 EST  EAGLE 46.9.0.0.0-76.9.0    
            CHG-ATTR-SECULOG: MASP B - COMPLTD
    ;

>
                chg-attr-seculog:tfrperiod=weekly

Command Accepted - Processing
                   
            tklc1131102 24-11-13 02:20:39 EST  EAGLE 48.0.0.0.0-80.10.0
            chg-attr-seculog:tfrperiod=weekly
            Command entered at terminal #2.
     ;
            tklc1131102 24-11-13 02:20:40 EST  EAGLE 48.0.0.0.0-80.10.0
            CHG-ATTR-SECULOG: MASP A - COMPLTD
     ;